The landing team is working on it. The issue seems to be due to recent patches to u-boot. On Sep 4, 2012 2:46 AM, "Alexander Sack" alexander.sack@linaro.org wrote:
Can we try same image with the LAVA bootloader version to confirm that it's a bootloader thing? Also CCed jcriby for bootloader support.
The builds are booting well with LAVA bootloader. We have all the results for these daily builds.
Check with Dave in case we can't find the bootloader installed in LAVA case. On Sep 3, 2012 10:50 PM, "Zach Pfeffer" zach.pfeffer@linaro.org wrote:
On 3 September 2012 05:41, Botao Sun botao.sun@linaro.org wrote:
- Zach
Sorry, I mean another Amit, Mr. Amit Pundir, he's working on Samsung
related
stuff I remembered.
Also, here is more information, I have tried several previous image, the last good one is build 47:
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
Therefore, I'm going to use this one as our weekly test target. However, please dig more on why build 48, 49 & 50 failed - bad thing started at
build
Thank you!
Botao,
Just had a second to look at this, I see:
U-Boot 2012.07-00053-gbf30cf4 (Sep 03 2012 - 07:03:03) for ORIGEN
CPU: Exynos4210@1000MHz
Board: ORIGEN DRAM: 1 GiB WARNING: Caches not enabled MMC: SAMSUNG SDHCI: 0 Timeout for status update! mmc fail to send stop cmd Using default environment
In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 reading boot.scr
397 bytes read Running bootscript from mmc0:2 ... ## Executing script at 42000000 reading uImage Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Transfer data timeout Error reading cluster
** Unable to read "uImage" from mmc 0:2 ** ** Can't read partition table on 0:0 ** ** Partition 2 not valid on device 0 **
** Unable to use mmc 0:2 for fatload ** ## Booting kernel from Legacy Image at 40007000 ... Image Name: Linux-3.4.8 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3879160 Bytes = 3.7 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image! ORIGEN #
on,
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
This would explain why it works in LAVA (since LAVA doesn't update the bootloader) but it doesn't work locally (since we do update the bootloader). Is this what you see?
BR Botao Sun
On Mon, Sep 3, 2012 at 8:25 PM, amit khare amit.khare@linaro.org
wrote:
on it....
Regards, Amit
On 3 September 2012 15:21, Botao Sun botao.sun@linaro.org wrote:
Hi Amit,
Would you take a look at this issue?
Origen Jelly Bean boot failed.: https://bugs.launchpad.net/linaro-android/+bug/1045244
The weird thing is LAVA shows that it works well:
http://validation.linaro.org/lava-server/dashboard/image-reports/origen-jb-g...
Is there anything I missed during SD card flashing?
Thank you!
BR Botao Sun
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android