Re: Linaro ICS on i.MX53 SABRE tablet

Hi,

On 25 May 2012 21:10, Timothy Skutt tskutt@yahoo.com wrote:

I built 12.04 per the instructions for i.MX53 and tried it on my i.MX53 SABRE tablet, but after u-boot loads the uImage and uIinitrd and then boots the kernel I get no output from the kernel.

That is to be expected, because the build if for the i.MX53 QuickStart board, not the SABRE.

They are largely, but not fully, identical. Chances are all you have to replace is the kernel. (I don't have a SABRE though, so can't tell for sure.)

ttyl bero