Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR nWmgwbVhTR0E#gid=18 .
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc 47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it to the e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ?
please guide me.
Ryan
05/17/2013
Hi,
Please pic the image from this build: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina...
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,****
I choose version is the Release 13.02RC3 according follow: ****https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR....
****
The release address as follow : ****https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc...
I download panda image is pandaboard.img.bz2 as ****http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t...
****
when it is booting, the follow message were showed, I add it tothe e-mail attachments.****
Does linaro support Omap4460 pandaboard es VB2 ?**** please guide me.**** ****Ryan****
05/17/2013****
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that url different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR nWmgwbVhTR0E#gid=18 .
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc 47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it to the e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ?
please guide me.
Ryan
05/17/2013
_______________________________________________ linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
That is the right url. Can you please try it again: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina...
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj, ****
Thank you for your reply, but that url can`t open. Is that urldifferent from others ?****
Best regards.****
*发件人:* Vishal Bhoj [mailto:vishal.bhoj@linaro.org] *发送时间:* 2013年5月17日 16:36 *收件人:* liangqin@multicorewareinc.com *抄送:* linaro-android *主题:* Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2****
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina...
The above build is the stable build for panda.****
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:****
Hi all,****
I choose version is the Release 13.02RC3 according follow: ****https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR....
The release address as follow : ****https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc...
I download panda image is pandaboard.img.bz2 as ****http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t...
when it is booting, the follow message were showed, I add it tothe e-mail attachments.****
Does linaro support Omap4460 pandaboard es VB2 ?**** please guide me.**** ****Ryan****
05/17/2013****
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android****
Hi Vishal Bhoj,
Thank you for your new url. I can open it very quickly , when I execute linaro_kernel_build_cmds.sh, that I download from this url, it still stay here very long time, as follow :
ryan@ubuntu:/workdir/linaro/kernel$ ./linaro_kernel_build_cmds.sh
Cloning into 'linaro-kernel'...
Is that right? What can I do next?
Best Regards.
发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 Vishal Bhoj 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
That is the right url. Can you please try it again: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that url different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR nWmgwbVhTR0E#gid=18 .
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc 47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it to the e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ?
please guide me.
Ryan
05/17/2013
_______________________________________________ linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi Vishal,
Many thanks for the URL. I can download the kernel and android source code by follow command :
./linaro_kernel_build_cmds.sh
./linaro_android_build_cmds.sh -m `pwd`/pinned-manifest.xml
When I make the android source , the follow message was showed :
make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a s: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
make: *** [out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats. o] Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a s: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
make: *** [out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz e.o] Error 1
Can you please guide me ?
Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
That is the right url. Can you please try it again: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that url different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR nWmgwbVhTR0E#gid=18 .
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc 47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it to the e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ?
please guide me.
Ryan
05/17/2013
_______________________________________________ linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel and androidsource code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message was showed : make -j2 boottarball systemtarball userdatatarball/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glibc2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/as: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
make: *** [out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.o] Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glibc2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/as: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
make: *** [out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocalize.o] Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
That is the right url. Can you please try it again: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina...
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that urldifferent from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina...
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR... .
The release address as follow :https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc...
I download panda image is pandaboard.img.bz2 ashttp://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t...
when it is booting, the follow message were showed, I add it to thee-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi YongQin,
You are right, I am going to download it. Thank you very much.
Best Regards
-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel and androidsource code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message was showed : make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a s:
error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats. o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a s:
error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that urldifferent from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR nWmgwbVhTR0E#gid=18
.
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc 47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it to
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi YongQin,
I meet some problem like this:
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
The crosstool is android-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.ta r.bz2. I am according to Vishal said url .
would you like guide me ?
-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel and androidsource code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message was showed : make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a s:
error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats. o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a s:
error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that urldifferent from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR nWmgwbVhTR0E#gid=18
.
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc 47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it to
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from linaro, the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool isandroid-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.ta r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel and androidsource code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message was showed : make -j2 boottarball systemtarball userdatatarball/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a s:
error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats. o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a s:
error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that urldifferent from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR nWmgwbVhTR0E#gid=18
.
The release address as follow :https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc 47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 ashttp://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it tothe
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi YongQin,
I only exec " ./linaro_android_build_cmds.sh -m `pwd`/pinned-manifest.xml" which come from https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina .
The linaro_android_build_cmds.sh says : ./repo sync if [ $SOURCE_OVERLAY_OPTIONAL -ne 1 ]; then # extract the vendor's source overlay tar -x -a -f "$SOURCE_OVERLAY" -C . fi # build the code . build/envsetup.sh make -j${CPUS} boottarball systemtarball userdatatarball
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from linaro, the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool isandroid-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel and androidsource code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message was showed
:
make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that urldifferent from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it tothe
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi YongQin,
I am according this page https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/ I don`t konw what is pinned manifest. I just want to get the full android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from linaro, the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool isandroid-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel and androidsource code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message was showed
:
make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that urldifferent from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it tothe
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2" TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this pagehttps://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/ I don`t konw what is pinned manifest. I just want to get the full android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from linaro, the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool isandroid-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel and androidsource code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message was showed:
make -j2 boottarball systemtarball userdatatarball/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that urldifferent from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 ashttp://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it tothe
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
Hi YongQin,
I get another error :
./repo init -u git://android.git.linaro.org/platform/manifest.git -b linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414, in <module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390, in _Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138, in _Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line 2348, in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line 1086, in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line 2006, in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line 2155, in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2" TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this page
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the full android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool is
android-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel and androidsource code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message was showed:
make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that
url
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it tothe
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
On 24 May 2013 10:06, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I get another error :./repo init -u git://android.git.linaro.org/platform/manifest.git -b linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard
This repo command works on my side. I think you need to check the repo command or network on your side.
And if you you have already downloaded the source on your local, you can comment out the "repo init" and "repo sync" command, and just try the build.
Thanks, Yongqin Liu
Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414, in
<module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390, in _Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138, in _Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line 2348, in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line 1086, in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line 2006, in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line 2155, in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2" TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this pagehttps://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the full android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool isandroid-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel and androidsource code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message was showed:
make -j2 boottarball systemtarball userdatatarball/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is thaturl
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 ashttp://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it tothe
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
Hi YongQin,
It`s ok now. but if i make it still show the error :
ryan@ubuntu:/workdir/linaro/android/android$ make -j2 ============================================ PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=full TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise HOST_BUILD_TYPE=release BUILD_ID=JDQ39E OUT_DIR=out ============================================ external/bluetooth/bluedroid/Android.mk:8: NO BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR, using only generic configuration external/busybox/Android.mk:34: warning: overriding commands for target `out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox' build/core/prebuilt.mk:133: warning: ignoring old commands for target `out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox' build/core/base_rules.mk:502: warning: overriding commands for target `out/target/product/generic/system/bin/tune2fs' external/busybox/Android.mk:258: warning: ignoring old commands for target `out/target/product/generic/system/bin/tune2fs' build/core/base_rules.mk:525: external/lava-blackbox/Android.mk: Module "lava-gtest-wrapper" has useless module tags: tests. It will be installed anyway. /usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such file or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such file or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such file or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such file or directory find: `src': No such file or directory /usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -ge: unary operator expected
I don`t konw my mistake.
-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月24日 10:14 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
On 24 May 2013 10:06, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I get another error :./repo init -u git://android.git.linaro.org/platform/manifest.git -b
linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard
This repo command works on my side. I think you need to check the repo command or network on your side.
And if you you have already downloaded the source on your local, you can comment out the "repo init" and "repo sync" command, and just try the build.
Thanks, Yongqin Liu
Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414, in
<module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390, in _Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138, in _Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line 2348, in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line 1086, in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line 2006, in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line 2155, in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li
naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this page
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the full android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not
Suitable
pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool isandroid-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel and
android
source code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message was
showed
:
make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is thaturl
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it
to
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
Hi,
Please export following variables in your build script.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2" TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
From the log below, your TARGET_PRODUCT is not right.
Thanks, Yongqin Liu
On 24 May 2013 10:43, ryan3216@tom.com wrote:
Hi YongQin,
It`s ok now. but if i make it still show the error :ryan@ubuntu:/workdir/linaro/android/android$ make -j2
PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=full TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise HOST_BUILD_TYPE=release BUILD_ID=JDQ39E OUT_DIR=out ============================================ external/bluetooth/bluedroid/Android.mk:8: NO BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR, using only generic configuration external/busybox/Android.mk:34: warning: overriding commands for target `out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox' build/core/prebuilt.mk:133: warning: ignoring old commands for target `out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox' build/core/base_rules.mk:502: warning: overriding commands for target `out/target/product/generic/system/bin/tune2fs' external/busybox/Android.mk:258: warning: ignoring old commands for target `out/target/product/generic/system/bin/tune2fs' build/core/base_rules.mk:525: external/lava-blackbox/Android.mk: Module "lava-gtest-wrapper" has useless module tags: tests. It will be installed anyway.
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `src': No such file or directory
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -ge: unary operator expected
I don`t konw my mistake.-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月24日 10:14 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
On 24 May 2013 10:06, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I get another error :./repo init -u git://android.git.linaro.org/platform/manifest.git -b
linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard
This repo command works on my side. I think you need to check the repo command or network on your side.
And if you you have already downloaded the source on your local, you can comment out the "repo init" and "repo sync" command, and just try the build.
Thanks, Yongqin Liu
Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414, in
<module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390, in _Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138, in _Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2348,
in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line
1086,
in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2006,
in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2155,
in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li
naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this page
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the
full
android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not
Suitable
pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool is
android-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel andandroid
source code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message wasshowed
:
make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is thaturl
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add itto
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi YongQin,
Could you like give me the linaro_android_build_cmds.sh which is the right one.
The one which I used is in attachment.
Best Regards
发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 10:51 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please export following variables in your build script.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2" TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
From the log below, your TARGET_PRODUCT is not right.
Thanks,
Yongqin Liu
On 24 May 2013 10:43, ryan3216@tom.com wrote:
Hi YongQin,
It`s ok now. but if i make it still show the error :ryan@ubuntu:/workdir/linaro/android/android$ make -j2
PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=full TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise HOST_BUILD_TYPE=release BUILD_ID=JDQ39E OUT_DIR=out ============================================ external/bluetooth/bluedroid/Android.mk:8: NO BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR, using only generic configuration external/busybox/Android.mk:34: warning: overriding commands for target `out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox' build/core/prebuilt.mk:133: warning: ignoring old commands for target `out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox' build/core/base_rules.mk:502: warning: overriding commands for target `out/target/product/generic/system/bin/tune2fs' external/busybox/Android.mk:258: warning: ignoring old commands for target `out/target/product/generic/system/bin/tune2fs' build/core/base_rules.mk:525: external/lava-blackbox/Android.mk: Module "lava-gtest-wrapper" has useless module tags: tests. It will be installed anyway.
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `src': No such file or directory
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -ge: unary operator expected
I don`t konw my mistake.-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月24日 10:14 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
On 24 May 2013 10:06, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I get another error :./repo init -u git://android.git.linaro.org/platform/manifest.git -b
linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard
This repo command works on my side. I think you need to check the repo command or network on your side.
And if you you have already downloaded the source on your local, you can comment out the "repo init" and "repo sync" command, and just try the build.
Thanks, Yongqin Liu
Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414, in
<module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390, in _Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138, in _Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2348,
in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line
1086,
in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2006,
in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2155,
in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li
naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this page
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the
full
android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not
Suitable
pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool is
android-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel andandroid
source code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message wasshowed
:
make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is thaturl
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add itto
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi, liangqin
Your script seems right, it has the variables I listed before.
Please run the script to build. Or you can export the variables manually, and run the make command.
ryan@ubuntu:/workdir/linaro/android/android$ make -j2
When you run the make command like this, I think the necessary variables was not exported before. So it will get error.
For your case, I guess following steps will work:
export INCLUDE_PERF=0 export TARGET_PRODUCT=pandaboard export TARGET_SIMULATOR=false export BUILD_TINY_ANDROID= export CPUS=`grep -c processor /proc/cpuinfo` export BUILD_FS_IMAGE=1 export TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi- # build the code . build/envsetup.sh make -j${CPUS} boottarball systemtarball userdatatarball
Thanks, Yongqin Liu On 24 May 2013 11:03, liangqin@multicorewareinc.com wrote:
Hi YongQin,****
Could you like give me the linaro_android_build_cmds.sh which isthe right one.****
The one which I used is in attachment.****
Best Regards****
*发件人:* YongQin Liu [mailto:yongqin.liu@linaro.org] *发送时间:* 2013年5月24日 10:51 *收件人:* ryan3216@tom.com *抄送:* liangqin@multicorewareinc.com; linaro-android *主题:* Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2****
Hi,
Please export following variables in your build script.****
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1****
From the log below, your TARGET_PRODUCT is not right.****
Thanks,****
Yongqin Liu
On 24 May 2013 10:43, ryan3216@tom.com wrote:
Hi YongQin,
It`s ok now. but if i make it still show the error :ryan@ubuntu:/workdir/linaro/android/android$ make -j2
PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=full TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise HOST_BUILD_TYPE=release BUILD_ID=JDQ39E OUT_DIR=out ============================================ external/bluetooth/bluedroid/Android.mk:8: NO BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR, using only generic configuration external/busybox/Android.mk:34: warning: overriding commands for target
`out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox'
build/core/prebuilt.mk:133: warning: ignoring old commands for target
`out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox'
build/core/base_rules.mk:502: warning: overriding commands for target `out/target/product/generic/system/bin/tune2fs' external/busybox/Android.mk:258: warning: ignoring old commands for
target
`out/target/product/generic/system/bin/tune2fs' build/core/base_rules.mk:525: external/lava-blackbox/Android.mk: Module "lava-gtest-wrapper" has useless module tags: tests. It will be installed anyway.
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `src': No such file or directory
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -ge: unary operator expected
I don`t konw my mistake.-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月24日 10:14 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
On 24 May 2013 10:06, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I get another error :./repo init -u git://android.git.linaro.org/platform/manifest.git -b
linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard
This repo command works on my side. I think you need to check the repo command or network on your side.
And if you you have already downloaded the source on your local, you can comment out the "repo init" and "repo sync" command, and just try the build.
Thanks, Yongqin Liu
Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414,
in
<module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390,
in
_Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138,
in
_Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py",
line
347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py",
line
200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2348,
in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line
1086,
in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2006,
in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2155,
in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li
naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this pagehttps://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the
full
android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not
Suitable
pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool isandroid-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel andandroid
source code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message wasshowed
:
make -j2 boottarball systemtarball userdatatarball/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is thaturl
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 ashttp://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add itto
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation****
Hi YongQin,
I am sorry, I get the error again
ryan@ubuntu:/workdir/linaro/android$ export INCLUDE_PERF=0
ryan@ubuntu:/workdir/linaro/android$ export TARGET_PRODUCT=pandaboard
ryan@ubuntu:/workdir/linaro/android$ export TARGET_SIMULATOR=false
ryan@ubuntu:/workdir/linaro/android$ export BUILD_TINY_ANDROID=
ryan@ubuntu:/workdir/linaro/android$ export CPUS=`grep -c processor /proc/cpuinfo`
ryan@ubuntu:/workdir/linaro/android$ export BUILD_FS_IMAGE=1
ryan@ubuntu:/workdir/linaro/android$ export TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li naro/bin/arm-linux-androideabi-
ryan@ubuntu:/workdir/linaro/android$ . build/envsetup.sh
ryan@ubuntu:/workdir/linaro/android/android$ make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androi deabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
/bin/bash: line 0: [: -ge: unary operator expected
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androi deabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
/bin/bash: line 0: [: -ge: unary operator expected
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androi deabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
/bin/bash: line 0: [: -ge: unary operator expected
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.2.2
TARGET_PRODUCT=pandaboard
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise
HOST_BUILD_TYPE=release
BUILD_ID=JDQ39E
OUT_DIR=out
============================================
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androi deabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
/bin/bash: line 0: [: -eq: unary operator expected
find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such file or directory
find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such file or directory
find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such file or directory
find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such file or directory
find: `src': No such file or directory
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androi deabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
/bin/bash: line 0: [: -ge: unary operator expected
发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 11:18 收件人: liangqin@multicorewareinc.com 抄送: ryan3216@tom.com; linaro-android 主题: Re: 答复: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, liangqin
Your script seems right, it has the variables I listed before.
Please run the script to build.
Or you can export the variables manually, and run the make command.
ryan@ubuntu:/workdir/linaro/android/android$ make -j2
When you run the make command like this, I think the necessary variables was not exported before.
So it will get error.
For your case, I guess following steps will work:
export INCLUDE_PERF=0 export TARGET_PRODUCT=pandaboard export TARGET_SIMULATOR=false export BUILD_TINY_ANDROID= export CPUS=`grep -c processor /proc/cpuinfo` export BUILD_FS_IMAGE=1 export TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li naro/bin/arm-linux-androideabi- # build the code . build/envsetup.sh
make -j${CPUS} boottarball systemtarball userdatatarball
Thanks,
Yongqin Liu
On 24 May 2013 11:03, liangqin@multicorewareinc.com wrote:
Hi YongQin,
Could you like give me the linaro_android_build_cmds.sh which is the right one.
The one which I used is in attachment.
Best Regards
发件人: YongQin Liu [mailto:yongqin.liu@linaro.org]
发送时间: 2013年5月24日 10:51
收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please export following variables in your build script.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2" TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
From the log below, your TARGET_PRODUCT is not right.
Thanks,
Yongqin Liu
On 24 May 2013 10:43, ryan3216@tom.com wrote:
Hi YongQin,
It`s ok now. but if i make it still show the error :ryan@ubuntu:/workdir/linaro/android/android$ make -j2
PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=full TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise HOST_BUILD_TYPE=release BUILD_ID=JDQ39E OUT_DIR=out ============================================ external/bluetooth/bluedroid/Android.mk:8: NO BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR, using only generic configuration external/busybox/Android.mk:34: warning: overriding commands for target `out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox' build/core/prebuilt.mk:133: warning: ignoring old commands for target `out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox' build/core/base_rules.mk:502: warning: overriding commands for target `out/target/product/generic/system/bin/tune2fs' external/busybox/Android.mk:258: warning: ignoring old commands for target `out/target/product/generic/system/bin/tune2fs' build/core/base_rules.mk:525: external/lava-blackbox/Android.mk: Module "lava-gtest-wrapper" has useless module tags: tests. It will be installed anyway.
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `src': No such file or directory
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -ge: unary operator expected
I don`t konw my mistake.-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月24日 10:14 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
On 24 May 2013 10:06, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I get another error :./repo init -u git://android.git.linaro.org/platform/manifest.git -b
linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard
This repo command works on my side. I think you need to check the repo command or network on your side.
And if you you have already downloaded the source on your local, you can comment out the "repo init" and "repo sync" command, and just try the build.
Thanks, Yongqin Liu
Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414, in
<module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390, in _Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138, in _Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2348,
in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line
1086,
in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2006,
in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2155,
in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li
naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this page
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the
full
android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not
Suitable
pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool is
android-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel andandroid
source code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message wasshowed
:
make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is thaturl
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add itto
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
On 24 May 2013 11:43, liangqin@multicorewareinc.com wrote:
Hi YongQin,****
I am sorry, I get the error again ****
ryan@ubuntu:/workdir/linaro/android$ export INCLUDE_PERF=0****
ryan@ubuntu:/workdir/linaro/android$ export TARGET_PRODUCT=pandaboard****
ryan@ubuntu:/workdir/linaro/android$ export TARGET_SIMULATOR=false****
ryan@ubuntu:/workdir/linaro/android$ export BUILD_TINY_ANDROID=****
ryan@ubuntu:/workdir/linaro/android$ export CPUS=`grep -c processor /proc/cpuinfo`****
ryan@ubuntu:/workdir/linaro/android$ export BUILD_FS_IMAGE=1****
ryan@ubuntu:/workdir/linaro/android$ export TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi-
ryan@ubuntu:/workdir/linaro/android$** . build/envsetup.sh
ryan@ubuntu:/workdir/linaro/android/android$ make -j2 boottarball systemtarball userdatatarball
The file build/envsetup.sh is not in the source directory? It's a little strange here that you change the directory.
could you run [. build/envsetup.sh ] under /workdir/linaro/android/android directory and try the make again?
Thanks, Yongqin Liu
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory****
/bin/bash: line 0: [: -ge: unary operator expected****
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory****
/bin/bash: line 0: [: -ge: unary operator expected****
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory****
/bin/bash: line 0: [: -ge: unary operator expected****
============================================****
PLATFORM_VERSION_CODENAME=REL****
PLATFORM_VERSION=4.2.2****
TARGET_PRODUCT=pandaboard****
TARGET_BUILD_VARIANT=eng****
TARGET_BUILD_TYPE=release****
TARGET_BUILD_APPS=****
TARGET_ARCH=arm****
TARGET_ARCH_VARIANT=armv7-a-neon****
HOST_ARCH=x86****
HOST_OS=linux****
HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise****
HOST_BUILD_TYPE=release****
BUILD_ID=JDQ39E****
OUT_DIR=out****
============================================****
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory****
/bin/bash: line 0: [: -eq: unary operator expected****
find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such file or directory****
find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such file or directory****
find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such file or directory****
find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such file or directory****
find: `src': No such file or directory****
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory****
/bin/bash: line 0: [: -ge: unary operator expected****
*发件人:* YongQin Liu [mailto:yongqin.liu@linaro.org] *发送时间:* 2013年5月24日 11:18 *收件人:* liangqin@multicorewareinc.com *抄送:* ryan3216@tom.com; linaro-android *主题:* Re: 答复: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2****
Hi, liangqin****
Your script seems right, it has the variables I listed before.****
Please run the script to build.****
Or you can export the variables manually, and run the make command.****
ryan@ubuntu:/workdir/linaro/android/android$ make -j2
When you run the make command like this, I think the necessary variables was not exported before.****
So it will get error.****
For your case, I guess following steps will work:****
export INCLUDE_PERF=0 export TARGET_PRODUCT=pandaboard export TARGET_SIMULATOR=false export BUILD_TINY_ANDROID= export CPUS=`grep -c processor /proc/cpuinfo` export BUILD_FS_IMAGE=1 export TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi- # build the code . build/envsetup.sh****
make -j${CPUS} boottarball systemtarball userdatatarball****
Thanks,****
Yongqin Liu****
On 24 May 2013 11:03, liangqin@multicorewareinc.com wrote:****
Hi YongQin,****
Could you like give me the linaro_android_build_cmds.sh which isthe right one.****
The one which I used is in attachment.****
Best Regards****
*发件人:* YongQin Liu [mailto:yongqin.liu@linaro.org] ****
*发送时间:* 2013年5月24日 10:51****
*收件人:* ryan3216@tom.com *抄送:* liangqin@multicorewareinc.com; linaro-android *主题:* Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2****
Hi,
Please export following variables in your build script.****
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1****
From the log below, your TARGET_PRODUCT is not right.****
Thanks,****
Yongqin Liu
On 24 May 2013 10:43, ryan3216@tom.com wrote:
Hi YongQin,
It`s ok now. but if i make it still show the error :ryan@ubuntu:/workdir/linaro/android/android$ make -j2
PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=full TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise HOST_BUILD_TYPE=release BUILD_ID=JDQ39E OUT_DIR=out ============================================ external/bluetooth/bluedroid/Android.mk:8: NO BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR, using only generic configuration external/busybox/Android.mk:34: warning: overriding commands for target
`out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox'
build/core/prebuilt.mk:133: warning: ignoring old commands for target
`out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox'
build/core/base_rules.mk:502: warning: overriding commands for target `out/target/product/generic/system/bin/tune2fs' external/busybox/Android.mk:258: warning: ignoring old commands for
target
`out/target/product/generic/system/bin/tune2fs' build/core/base_rules.mk:525: external/lava-blackbox/Android.mk: Module "lava-gtest-wrapper" has useless module tags: tests. It will be installed anyway.
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `src': No such file or directory
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -ge: unary operator expected
I don`t konw my mistake.-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月24日 10:14 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
On 24 May 2013 10:06, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I get another error :./repo init -u git://android.git.linaro.org/platform/manifest.git -b
linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard
This repo command works on my side. I think you need to check the repo command or network on your side.
And if you you have already downloaded the source on your local, you can comment out the "repo init" and "repo sync" command, and just try the build.
Thanks, Yongqin Liu
Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414,
in
<module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390,
in
_Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138,
in
_Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py",
line
347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py",
line
200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2348,
in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line
1086,
in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2006,
in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2155,
in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li
naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this pagehttps://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the
full
android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not
Suitable
pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool isandroid-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel andandroid
source code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message wasshowed
:
make -j2 boottarball systemtarball userdatatarball/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is thaturl
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 ashttp://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add itto
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation****
-- ****
Thanks,****
Yongqin Liu****
---------------------------------------------------------------****
#mailing list****
linaro-android@lists.linaro.org linaro-dev@lists.linaro.org****
http://lists.linaro.org/mailman/listinfo/linaro-android****
linaro-validation@lists.linaro.org linaro-dev@lists.linaro.org****
Hi ,
I meet the same problem by the previous linaro_android_build_cmds.sh . You say that is ok. the error log is:
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androi deabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
I try many times, would you like teach me how to download the full android source of linaro ? Can I follow this one ? https://wiki.linaro.org/Platform/Android/BuildSource
Because I feel linaro_android_build_cmds.sh is not stable. If I download it ,it may could not be opened; if I compile it , it could show me some errors.
I have no linaro-private access-ID . Must I have one when I download the source ?
Best Regards
发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 11:18 收件人: liangqin@multicorewareinc.com 抄送: ryan3216@tom.com; linaro-android 主题: Re: 答复: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, liangqin
Your script seems right, it has the variables I listed before.
Please run the script to build.
Or you can export the variables manually, and run the make command.
ryan@ubuntu:/workdir/linaro/android/android$ make -j2
When you run the make command like this, I think the necessary variables was not exported before.
So it will get error.
For your case, I guess following steps will work:
export INCLUDE_PERF=0 export TARGET_PRODUCT=pandaboard export TARGET_SIMULATOR=false export BUILD_TINY_ANDROID= export CPUS=`grep -c processor /proc/cpuinfo` export BUILD_FS_IMAGE=1 export TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li naro/bin/arm-linux-androideabi- # build the code . build/envsetup.sh
make -j${CPUS} boottarball systemtarball userdatatarball
Thanks,
Yongqin Liu
On 24 May 2013 11:03, liangqin@multicorewareinc.com wrote:
Hi YongQin,
Could you like give me the linaro_android_build_cmds.sh which is the right one.
The one which I used is in attachment.
Best Regards
发件人: YongQin Liu [mailto:yongqin.liu@linaro.org]
发送时间: 2013年5月24日 10:51
收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please export following variables in your build script.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2" TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
From the log below, your TARGET_PRODUCT is not right.
Thanks,
Yongqin Liu
On 24 May 2013 10:43, ryan3216@tom.com wrote:
Hi YongQin,
It`s ok now. but if i make it still show the error :ryan@ubuntu:/workdir/linaro/android/android$ make -j2
PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=full TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise HOST_BUILD_TYPE=release BUILD_ID=JDQ39E OUT_DIR=out ============================================ external/bluetooth/bluedroid/Android.mk:8: NO BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR, using only generic configuration external/busybox/Android.mk:34: warning: overriding commands for target `out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox' build/core/prebuilt.mk:133: warning: ignoring old commands for target `out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox' build/core/base_rules.mk:502: warning: overriding commands for target `out/target/product/generic/system/bin/tune2fs' external/busybox/Android.mk:258: warning: ignoring old commands for target `out/target/product/generic/system/bin/tune2fs' build/core/base_rules.mk:525: external/lava-blackbox/Android.mk: Module "lava-gtest-wrapper" has useless module tags: tests. It will be installed anyway.
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `src': No such file or directory
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory /bin/bash: line 0: [: -ge: unary operator expected
I don`t konw my mistake.-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月24日 10:14 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
On 24 May 2013 10:06, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I get another error :./repo init -u git://android.git.linaro.org/platform/manifest.git -b
linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard
This repo command works on my side. I think you need to check the repo command or network on your side.
And if you you have already downloaded the source on your local, you can comment out the "repo init" and "repo sync" command, and just try the build.
Thanks, Yongqin Liu
Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414, in
<module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390, in _Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138, in _Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py", line 200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2348,
in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line
1086,
in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2006,
in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2155,
in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li
naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this page
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the
full
android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not
Suitable
pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool is
android-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel andandroid
source code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message wasshowed
:
make -j2 boottarball systemtarball userdatatarball
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is thaturl
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add itto
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
Hi,
For pandaboard, you don't need the linaro-private access ID. So I don't think there is any problem on the source you downloaded.
And for your compiling problem, have you tried following steps under the /workdir/linaro/android/android directory:
$ export INCLUDE_PERF=0
$ export TARGET_PRODUCT=pandaboard
$ export TARGET_SIMULATOR=false
$ export BUILD_TINY_ANDROID=
$ export BUILD_FS_IMAGE=1
$ export TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi-
$** . build/envsetup.sh
$ make -j2 boottarball systemtarball userdatatarball
Thanks, Yongqin Liu On 27 May 2013 09:21, liangqin@multicorewareinc.com wrote:
Hi ,****
I meet the same problem by the previous linaro_android_build_cmds.sh . You say that is ok. the error log is:****
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory****
I try many times, would you like teach me how to download the full android source of linaro ? Can I follow this one ? https://wiki.linaro.org/Platform/Android/BuildSource****
Because I feel linaro_android_build_cmds.sh is not stable. If I download it ,it may could not be opened; if I compile it , it could show me some errors.****
I have no linaro-private access-ID . Must I have one when I download the source ?****
Best Regards****
*发件人:* YongQin Liu [mailto:yongqin.liu@linaro.org] *发送时间:* 2013年5月24日 11:18 *收件人:* liangqin@multicorewareinc.com *抄送:* ryan3216@tom.com; linaro-android *主题:* Re: 答复: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2****
Hi, liangqin****
Your script seems right, it has the variables I listed before.****
Please run the script to build.****
Or you can export the variables manually, and run the make command.****
ryan@ubuntu:/workdir/linaro/android/android$ make -j2
When you run the make command like this, I think the necessary variables was not exported before.****
So it will get error.****
For your case, I guess following steps will work:****
export INCLUDE_PERF=0 export TARGET_PRODUCT=pandaboard export TARGET_SIMULATOR=false export BUILD_TINY_ANDROID= export CPUS=`grep -c processor /proc/cpuinfo` export BUILD_FS_IMAGE=1 export TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi- # build the code . build/envsetup.sh****
make -j${CPUS} boottarball systemtarball userdatatarball****
Thanks,****
Yongqin Liu****
On 24 May 2013 11:03, liangqin@multicorewareinc.com wrote:****
Hi YongQin,****
Could you like give me the linaro_android_build_cmds.sh which isthe right one.****
The one which I used is in attachment.****
Best Regards****
*发件人:* YongQin Liu [mailto:yongqin.liu@linaro.org] ****
*发送时间:* 2013年5月24日 10:51****
*收件人:* ryan3216@tom.com *抄送:* liangqin@multicorewareinc.com; linaro-android *主题:* Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2****
Hi,
Please export following variables in your build script.****
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1****
From the log below, your TARGET_PRODUCT is not right.****
Thanks,****
Yongqin Liu
On 24 May 2013 10:43, ryan3216@tom.com wrote:
Hi YongQin,
It`s ok now. but if i make it still show the error :ryan@ubuntu:/workdir/linaro/android/android$ make -j2
PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=full TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise HOST_BUILD_TYPE=release BUILD_ID=JDQ39E OUT_DIR=out ============================================ external/bluetooth/bluedroid/Android.mk:8: NO BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR, using only generic configuration external/busybox/Android.mk:34: warning: overriding commands for target
`out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox'
build/core/prebuilt.mk:133: warning: ignoring old commands for target
`out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox'
build/core/base_rules.mk:502: warning: overriding commands for target `out/target/product/generic/system/bin/tune2fs' external/busybox/Android.mk:258: warning: ignoring old commands for
target
`out/target/product/generic/system/bin/tune2fs' build/core/base_rules.mk:525: external/lava-blackbox/Android.mk: Module "lava-gtest-wrapper" has useless module tags: tests. It will be installed anyway.
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `src': No such file or directory
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -ge: unary operator expected
I don`t konw my mistake.-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月24日 10:14 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
On 24 May 2013 10:06, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I get another error :./repo init -u git://android.git.linaro.org/platform/manifest.git -b
linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard
This repo command works on my side. I think you need to check the repo command or network on your side.
And if you you have already downloaded the source on your local, you can comment out the "repo init" and "repo sync" command, and just try the build.
Thanks, Yongqin Liu
Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414,
in
<module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390,
in
_Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138,
in
_Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py",
line
347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py",
line
200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2348,
in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line
1086,
in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2006,
in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2155,
in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li
naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this pagehttps://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the
full
android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not
Suitable
pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool isandroid-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel andandroid
source code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message wasshowed
:
make -j2 boottarball systemtarball userdatatarball/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is thaturl
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 ashttp://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add itto
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation****
-- ****
Thanks,****
Yongqin Liu****
---------------------------------------------------------------****
#mailing list****
linaro-android@lists.linaro.org linaro-dev@lists.linaro.org****
http://lists.linaro.org/mailman/listinfo/linaro-android****
linaro-validation@lists.linaro.org linaro-dev@lists.linaro.org****
Can you please make sure all the dependencies are installed as per this instructions: http://source.android.com/source/initializing.html
On 27 May 2013 06:51, liangqin@multicorewareinc.com wrote:
Hi ,****
I meet the same problem by the previous linaro_android_build_cmds.sh . You say that is ok. the error log is:****
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory****
I try many times, would you like teach me how to download the full android source of linaro ? Can I follow this one ? https://wiki.linaro.org/Platform/Android/BuildSource****
Because I feel linaro_android_build_cmds.sh is not stable. If I download it ,it may could not be opened; if I compile it , it could show me some errors.****
I have no linaro-private access-ID . Must I have one when I download the source ?****
Best Regards****
*发件人:* YongQin Liu [mailto:yongqin.liu@linaro.org] *发送时间:* 2013年5月24日 11:18 *收件人:* liangqin@multicorewareinc.com *抄送:* ryan3216@tom.com; linaro-android *主题:* Re: 答复: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2****
Hi, liangqin****
Your script seems right, it has the variables I listed before.****
Please run the script to build.****
Or you can export the variables manually, and run the make command.****
ryan@ubuntu:/workdir/linaro/android/android$ make -j2
When you run the make command like this, I think the necessary variables was not exported before.****
So it will get error.****
For your case, I guess following steps will work:****
export INCLUDE_PERF=0 export TARGET_PRODUCT=pandaboard export TARGET_SIMULATOR=false export BUILD_TINY_ANDROID= export CPUS=`grep -c processor /proc/cpuinfo` export BUILD_FS_IMAGE=1 export TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi- # build the code . build/envsetup.sh****
make -j${CPUS} boottarball systemtarball userdatatarball****
Thanks,****
Yongqin Liu****
On 24 May 2013 11:03, liangqin@multicorewareinc.com wrote:****
Hi YongQin,****
Could you like give me the linaro_android_build_cmds.sh which isthe right one.****
The one which I used is in attachment.****
Best Regards****
*发件人:* YongQin Liu [mailto:yongqin.liu@linaro.org] ****
*发送时间:* 2013年5月24日 10:51****
*收件人:* ryan3216@tom.com *抄送:* liangqin@multicorewareinc.com; linaro-android *主题:* Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2****
Hi,
Please export following variables in your build script.****
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1****
From the log below, your TARGET_PRODUCT is not right.****
Thanks,****
Yongqin Liu
On 24 May 2013 10:43, ryan3216@tom.com wrote:
Hi YongQin,
It`s ok now. but if i make it still show the error :ryan@ubuntu:/workdir/linaro/android/android$ make -j2
PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=full TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.5.0-23-generic-x86_64-with-Ubuntu-12.04-precise HOST_BUILD_TYPE=release BUILD_ID=JDQ39E OUT_DIR=out ============================================ external/bluetooth/bluedroid/Android.mk:8: NO BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR, using only generic configuration external/busybox/Android.mk:34: warning: overriding commands for target
`out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox'
build/core/prebuilt.mk:133: warning: ignoring old commands for target
`out/target/product/generic/obj/EXECUTABLES/busybox_intermediates/busybox'
build/core/base_rules.mk:502: warning: overriding commands for target `out/target/product/generic/system/bin/tune2fs' external/busybox/Android.mk:258: warning: ignoring old commands for
target
`out/target/product/generic/system/bin/tune2fs' build/core/base_rules.mk:525: external/lava-blackbox/Android.mk: Module "lava-gtest-wrapper" has useless module tags: tests. It will be installed anyway.
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-client/src': No such
file
or directory find: `../../vendor/unbundled_google/libs/gcm/gcm-server/src': No such
file
or directory find: `src': No such file or directory
/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -ge: unary operator expected
I don`t konw my mistake.-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月24日 10:14 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
On 24 May 2013 10:06, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I get another error :./repo init -u git://android.git.linaro.org/platform/manifest.git -b
linaro_android_4.2.2 -m default.xml --repo-url=git://android.git.linaro.org/tools/repo -g common,pandaboard
This repo command works on my side. I think you need to check the repo command or network on your side.
And if you you have already downloaded the source on your local, you can comment out the "repo init" and "repo sync" command, and just try the build.
Thanks, Yongqin Liu
Traceback (most recent call last): File "/workdir/linaro/android/android/.repo/repo/main.py", line 414,
in
<module> _Main(sys.argv[1:]) File "/workdir/linaro/android/android/.repo/repo/main.py", line 390,
in
_Main result = repo._Run(argv) or 0 File "/workdir/linaro/android/android/.repo/repo/main.py", line 138,
in
_Run result = cmd.Execute(copts, cargs) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py",
line
347, in Execute self._SyncManifest(opt) File "/workdir/linaro/android/android/.repo/repo/subcmds/init.py",
line
200, in _SyncManifest m.MetaBranchSwitch(opt.manifest_branch) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2348,
in MetaBranchSwitch self.Sync_LocalHalf(syncbuf) File "/workdir/linaro/android/android/.repo/repo/project.py", line
1086,
in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2006,
in _revlist return self.work_git.rev_list(*a, **kw) File "/workdir/linaro/android/android/.repo/repo/project.py", line
2155,
in rev_list p.stderr)) error.GitError: manifests rev-list ('^a1d922104c44513692ac8fff34f5e0d08ca7c475', 'HEAD', '--'): fatal: bad revision 'HEAD'
Oh my god.-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:54 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard
es
omap4460 vB2
Hi, liangqin
Please export following variable in your linaro_android_build_cmds.sh if they are not there, and have a try.
MANIFEST_REPO=git://android.git.linaro.org/platform/manifest.git MANIFEST_BRANCH=linaro_android_4.2.2 MANIFEST_FILENAME=default.xml REPO_GROUPS="common,pandaboard" INCLUDE_PERF=0 TARGET_PRODUCT=pandaboard TARGET_SIMULATOR=false SOURCE_OVERLAY="open/20120716/build-info.tar.bz2"
TARGET_TOOLS_PREFIX=prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-li
naro/bin/arm-linux-androideabi- TOOLCHAIN_TRIPLET=arm-linux-androideabi BUILD_FS_IMAGE=1
Thanks, Yongqin Liu On 24 May 2013 09:44, liangqin@multicorewareinc.com wrote:
Hi YongQin,
I am according this pagehttps://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/ I don`t konw what is pinned manifest. I just want to get the
full
android source code for pandaboard. Is that right?
Best Regards
-----邮件原件----- 发件人: YongQin Liu [mailto:yongqin.liu@linaro.org] 发送时间: 2013年5月24日 9:22 收件人: ryan3216@tom.com 抄送: liangqin@multicorewareinc.com; linaro-android 主题: Re: 答复: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not
Suitable
pandaboard es omap4460 vB2
Hi, ryan3216
On 24 May 2013 09:12, ryan3216@tom.com wrote:
Hi YongQin,
I meet some problem like this:/usr/local/src/android-toolchain-eabi/bin/../libexec/gcc/arm-linux-androidea
bi/4.7.3/cc1: error while loading shared libraries: libz.so.1: cannot
open
shared object file: No such file or directory /bin/bash: line 0: [: -eq: unary operator expected
Seems the toolchain still not correct, if you use the toolchain from
linaro,
the gcc command should be something like android-toolchain-eabi/bin/arm-linux-androideabi-gcc
BTW, Could you paste your build script or steps here? That would be helpful for us to find the problem.
Thanks, Yongqin Liu
The crosstool isandroid-toolchain-eabi-linaro-4.7-2013.02-1-2013-02-14_19-41-37-linux-x86.
ta
r.bz2. I am according to Vishal said url .
would you like guide me ?-----邮件原件----- 发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 YongQin Liu 发送时间: 2013年5月23日 9:46 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi, linagqin
seems the toolchain is not set correctly,
did you export the toolchain variable like this: export
TARGET_TOOLS_PREFIX=android-toolchain-eabi/bin/arm-linux-androideabi-
Thanks, Yongqin Liu
On 23 May 2013 09:37, liangqin@multicorewareinc.com wrote:
Hi Vishal,
Many thanks for the URL. I can download the kernel andandroid
source code by follow command :
./linaro_kernel_build_cmds.sh ./linaro_android_build_cmds.sh -m`pwd`/pinned-manifest.xml
When I make the android source , the follow message wasshowed
:
make -j2 boottarball systemtarball userdatatarball/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/EXECUTABLES/fs_get_stats_intermediates/fs_get_stats.
o]
Error 1
make: *** Waiting for unfinished jobs....
/workdir/linaro/android/android/prebuilts/gcc/linux-x86/host/i686-linux-glib
c2.7-4.6/bin/../lib/gcc/i686-linux/4.6.x-google/../../../../i686-linux/bin/a
s:
error while loading shared libraries: libz.so.1: cannot open shared
object
file: No such file or directory
make: ***
[out/host/linux-x86/obj/STATIC_LIBRARIES/libhost_intermediates/pseudolocaliz
e.o]
Error 1
Can you please guide me ?Best Regards
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable
pandaboard
es
omap4460 vB2
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is thaturl
different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina
ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR
nWmgwbVhTR0E#gid=18
.
The release address as follow :https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc
47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 ashttp://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t
ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add itto
the
e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ? please guide me.Ryan
05/17/2013
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation****
-- ****
Thanks,****
Yongqin Liu****
---------------------------------------------------------------****
#mailing list****
linaro-android@lists.linaro.org linaro-dev@lists.linaro.org****
http://lists.linaro.org/mailman/listinfo/linaro-android****
linaro-validation@lists.linaro.org linaro-dev@lists.linaro.org****
http://lists.linaro.org/pipermail/linaro-validation****
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android@lists.linaro.org
-
liangqin＠multicorewareinc.com -
ryan3216＠tom.com -
Vishal Bhoj -
YongQin Liu