Hi Patrik,

Did you get any of the tar balls under out/target/product/pandaboard/? No, Except that the out/target/product/pandaboard/ folder has uImage in it and system, and root folder created. I have tried make clean, then i have executed the make command for which i have followed all the instructions given in the link

Did you have boottarball systemtarball userdatatarball as targets when you ran make? Yes.

Regards, Aditya

-----Original Message----- From: Patrik Ryd [mailto:patrik.ryd@linaro.org] Sent: Mon 3/26/2012 10:02 PM To: Aditya Podila Cc: linaro-android@lists.linaro.org Subject: Re: [build does not go thru]

On 26 March 2012 14:29, Aditya Podila apodila@aptina.com wrote:

**

Hi Linaro team,

Hi,

I have followed the the instructions given in https://wiki.linaro.org/Platform/Android/BuildSource site And i see that my build does not go thru. In the sense "make" stops and exists with out any error

It's hard to guess what has gone wrong.

Did you get any of the tar balls under out/target/product/pandaboard/?

Did you have boottarball systemtarball userdatatarball as targets when you ran make?

Regards Patrik

find the build log attaches with the mail, please guide me through.

Regards Aditya

Aptina India Private Limited / Frontline Grandeur, 14 Walton Road, Bangalore - 560001, India

This e-mail and any attachments contain confidential information and are solely for the review and use of the intended recipient. If you have received this e-mail in error, please notify the sender and destroy this e-mail and any copies.

---

linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android

Aptina India Private Limited / Frontline Grandeur, 14 Walton Road, Bangalore - 560001, India

This e-mail and any attachments contain confidential information and are solely for the review and use of the intended recipient. If you have received this e-mail in error, please notify the sender and destroy this e-mail and any copies.

Hi Bernhard,

I had tried even the branch 4.0.3, Still i face the same problem. Also the build log is exactly where the build stops, in fact "Make" exits from that place and build ends abruptly.

Regards Aditya

-----Original Message----- From: Bernhard Rosenkränzer [mailto:bernhard.rosenkranzer@linaro.org] Sent: Mon 3/26/2012 10:32 PM To: Aditya Podila Cc: linaro-android@lists.linaro.org Subject: Re: [build does not go thru]

Hi, your build log seems incomplete (it doesn't show any error or anything else going wrong) - maybe you redirected stdout to the log file without also redirecting stderr? Either way, there's a couple of odd things about it, aside from the fact that it doesn't indicate any errors:

- It says PLATFORM_VERSION=4.0.1 - that's ancient and hasn't been touched for a long time. Chances are you want 4.0.3 - The ffmpeg build process uses the arm-eabi-gcc compiler. It should be using the arm-linux-androideabi-gcc compiler. Did you set TARGET_TOOLS_PREFIX correctly and does it contain a proper compiler, such as the one from https://android-build.linaro.org/builds/~linaro-android/toolchain-4.6-2012.0... ?

Will take a look at the build instructions, maybe there's some outdated stuff there.

ttyl bero

On 26 March 2012 14:29, Aditya Podila apodila@aptina.com wrote:

Hi Linaro team,

I have followed the the instructions given in https://wiki.linaro.org/Platform/Android/BuildSource site And i see that my build does not go thru. In the sense "make"  stops and exists with out any error

find the build log attaches with the mail, please guide me through.

Regards Aditya

Aptina India Private Limited / Frontline Grandeur, 14 Walton Road, Bangalore

• 560001, India

This e-mail and any attachments contain confidential information and are solely for the review and use of the intended recipient. If you have received this e-mail in error, please notify the sender and destroy this e-mail and any copies.

---

linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android

Aptina India Private Limited / Frontline Grandeur, 14 Walton Road, Bangalore - 560001, India

This e-mail and any attachments contain confidential information and are solely for the review and use of the intended recipient. If you have received this e-mail in error, please notify the sender and destroy this e-mail and any copies.

Hi Bernhard,

The problem got resolved after few hiccups i followed the steps below

Repo used --------- repo init -u git://android.git.linaro.org/platform/manifest.git -b linaro_android_4.0.3 -m staging-panda.xml

Tool chain used --------------- Android prebuilt tool chain is used and location in the repo is /prebuilt/linux-x86/toolchain/arm-linux-androideabi-4.4.x/bin/

Make Command ------------- make TARGET_PRODUCT=pandaboard TARGET_TOOLS_PREFIX=./prebuilt/linux-x86/toolchain/arm-linux-androideabi-4.4.x/bin/arm-linux-androideabi- boottarball systemtarball userdatatarball

And typically the uboot build was using arm-linux-gnueabi- and not arm-linux-androideabi- as we have passed in tool chain prefix

//// Log snipet

cd ./u-boot &&\ if [ -e arm-linux-gnueabi-gcc/arm-linux-gnueabi-ld.bfd ]; then ln -sf arm-linux-gnueabi-gcc/arm-linux-gnueabi-ld.bfd arm-linux-gnueabi-ld; fi &&\ export PATH=`pwd`:arm-linux-gnueabi-gcc:/home/aditya/bin:/home/aditya/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/aditya/sujit/jdk1.6.0_30/bin: && \ make O=../out/target/product/pandaboard/obj/u-boot CROSS_COMPILE=arm-linux-gnueabi- omap4_panda_config &&\ make O=../out/target/product/pandaboard/obj/u-boot CROSS_COMPILE=arm-linux-gnueabi- make[1]: Entering directory `/home/aditya/Aptina/panda/u-boot'

After this i find that boot stops with.

"Uncompressing Linux... done, booting the kernel"

Thanks for help in advance.

Regards Aditya

-----Original Message----- From: Bernhard Rosenkränzer [mailto:bernhard.rosenkranzer@linaro.org] Sent: 26 March 2012 20:28 To: Aditya Podila Cc: linaro-android@lists.linaro.org Subject: Re: [build does not go thru]

Hi, if you're doing a parallel build, the error is not necessarily at the end. There could be some error long before it starts building the kernel.

I'm quite sure the problem is your toolchain (as pointed out in the previous message). What exactly is the value you're passing as TARGET_TOOLS_PREFIX, and what files are in there?

ttyl bero

2012/3/26 Aditya Podila apodila@aptina.com:

Hi Bernhard,

I had tried even the branch 4.0.3, Still i face the same problem. Also the build log is exactly where the build stops, in fact "Make" exits from that place and build ends abruptly.

Regards Aditya

-----Original Message----- From: Bernhard Rosenkränzer [mailto:bernhard.rosenkranzer@linaro.org] Sent: Mon 3/26/2012 10:32 PM To: Aditya Podila Cc: linaro-android@lists.linaro.org Subject: Re: [build does not go thru]

Hi, your build log seems incomplete (it doesn't show any error or anything else going wrong) - maybe you redirected stdout to the log file without also redirecting stderr? Either way, there's a couple of odd things about it, aside from the fact that it doesn't indicate any errors:

• It says PLATFORM_VERSION=4.0.1 - that's ancient and hasn't been

touched for a long time. Chances are you want 4.0.3

• The ffmpeg build process uses the arm-eabi-gcc compiler. It should

be using the arm-linux-androideabi-gcc compiler. Did you set TARGET_TOOLS_PREFIX correctly and does it contain a proper compiler, such as the one from https://android-build.linaro.org/builds/~linaro-android/toolchain-4.6-2012.0... ?

Will take a look at the build instructions, maybe there's some outdated stuff there.

ttyl bero

On 26 March 2012 14:29, Aditya Podila apodila@aptina.com wrote:

...

Hi Linaro team,

I have followed the the instructions given in https://wiki.linaro.org/Platform/Android/BuildSource site And i see that my build does not go thru. In the sense "make"  stops and exists with out any error

find the build log attaches with the mail, please guide me through.

Regards Aditya

Aptina India Private Limited / Frontline Grandeur, 14 Walton Road, Bangalore

• 560001, India

This e-mail and any attachments contain confidential information and are solely for the review and use of the intended recipient. If you have received this e-mail in error, please notify the sender and destroy this e-mail and any copies.

---

linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android

Aptina India Private Limited / Frontline Grandeur, 14 Walton Road, Bangalore

• 560001, India

This e-mail and any attachments contain confidential information and are solely for the review and use of the intended recipient. If you have received this e-mail in error, please notify the sender and destroy this e-mail and any copies.

Aptina India Private Limited / Frontline Grandeur, 14 Walton Road, Bangalore - 560001, India

This e-mail and any attachments contain confidential information and are solely for the review and use of the intended recipient. If you have received this e-mail in error, please notify the sender and destroy this e-mail and any copies.