Hi Vishal,
I get pandaboard.img.bz2 from the url http://snapshots.linaro.org/android/~linaro-android-member-ti/panda-linaro/2 96/pandaboard.img.bz2, that come from the page you tell me to try again.
I get any error log and I attached to the annex . It`s same with linera 13.04 release. I use the follow cmd :
ryan@ubuntu:/workdir$sudo bzip2 -d pandaboard.img.bz2
ryan@ubuntu:/workdir$sudo dd if=pandaboard.img of=/dev/sdb bs=4M
512+0 records in
512+0 records out
2147483648 bytes (2.1 GB) copied, 483.417 s, 4.4 MB/s
ryan@ubuntu:/workdir$ sudo sync
Where must have a problem. Please guide me .
Best Regards
发件人: linaro-android-bounces@lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 Vishal Bhoj 发送时间: 2013年5月17日 18:41 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
That is the right url. Can you please try it again: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:
Hi Vishal Bhoj,
Thank you for your reply, but that url can`t open. Is that url different from others ?
Best regards.
发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin@multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2
Hi,
Please pic the image from this build: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/
The above build is the stable build for panda.
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:
Hi all,
I choose version is the Release 13.02RC3 according follow:
https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR nWmgwbVhTR0E#gid=18 .
The release address as follow :
https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc 47-tilt-tracking-blob/#build=196
I download panda image is pandaboard.img.bz2 as
http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t ilt-tracking-blob/196/pandaboard.img.bz2
when it is booting, the follow message were showed, I add it to the e-mail attachments.
Does linaro support Omap4460 pandaboard es VB2 ?
please guide me.
Ryan
05/17/2013
_______________________________________________ linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
On 20 May 2013 14:07, ryan3216@tom.com wrote:
Hi Vishal,****
I get pandaboard.img.bz2 from the urlhttp://snapshots.linaro.org/android/~linaro-android-member-ti/panda-linaro/2..., that come from the page you tell me to try again.****
I get any error log and I attached to the annex . It`s same withlinera 13.04 release. I use the follow cmd :****
**** ryan@ubuntu:/workdir$sudo bzip2 -d pandaboard.img.bz2**** ryan@ubuntu:/workdir$sudo dd if=pandaboard.img of=/dev/sdb bs=4M****
512+0 records in**** 512+0 records out**** 2147483648 bytes (2.1 GB) copied, 483.417 s, 4.4 MB/s**** ryan@ubuntu:/workdir$ sudo sync******
Please install the graphics binaries:
$ wget http://people.linaro.org/~vishalbhoj/install-binaries-4.0.4.sh $ chmod a+x install-binaries-4.0.4.sh $ ./install-binaries-4.0.4.sh
**
Where must have a problem. Please guide me .**** ****Best Regards****
*发件人:* linaro-android-bounces@lists.linaro.org [mailto: linaro-android-bounces@lists.linaro.org] *代表 *Vishal Bhoj *发送时间:* 2013年5月17日 18:41 *收件人:* liangqin@multicorewareinc.com *抄送:* linaro-android *主题:* Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2****
That is the right url. Can you please try it again:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina...
On 17 May 2013 14:18, liangqin@multicorewareinc.com wrote:****
Hi Vishal Bhoj, ****
Thank you for your reply, but that url can`t open. Is that urldifferent from others ?****
Best regards.****
*发件人:* Vishal Bhoj [mailto:vishal.bhoj@linaro.org] *发送时间:* 2013年5月17日 16:36 *收件人:* liangqin@multicorewareinc.com *抄送:* linaro-android *主题:* Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2****
Hi,
Please pic the image from this build:
https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina...
The above build is the stable build for panda.****
On 17 May 2013 14:00, liangqin@multicorewareinc.com wrote:****
Hi all,****
I choose version is the Release 13.02RC3 according follow: ****https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR....
The release address as follow : ****https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc...
I download panda image is pandaboard.img.bz2 as ****http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t...
when it is booting, the follow message were showed, I add it tothe e-mail attachments.****
Does linaro support Omap4460 pandaboard es VB2 ?**** please guide me.**** ****Ryan****
05/17/2013****
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android****
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android@lists.linaro.org
-
ryan3216＠tom.com -
Vishal Bhoj