linaro-release December 2011

linaro-release@lists.linaro.org

12 participants
15 discussions

Respin: 2011-12-1

by Lee Jones

Hi, Please re-spin the Snowball image. It now contains Gator support. Kind regards, Lee -- Lee Jones Linaro ST-Ericsson Landing Team Lead M: +44 77 88 633 515 Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog

12 years, 10 months

[Bug 894389] Re: SGX driver failing on ICS on tracking-panda

by Nicolas Dechesne

scott, as of today, there is no DDK1.8 that works with X11. hence we cannot move Ubuntu to 1.8. we are tracking this internally, but it requires engineering effort to make the transition, and there is no good reason and no resources to do it now (except to align ubuntu and android DDK which is not a must have as of today for us). also the DDK1.7 was especially made to allow a reuse of the kernel driver between Android and Ubuntu (Motorola BIONIC is the reason why this happens...), there is no reason to believe that the DDK1.8 will offer that too... However, the linaro kernel includes the PVR driver for GB indeed (DDK1.7) but for Ubuntu we use an external PVR module that is provided as an out-of-driver. so you might be able to update the in-tree PVR to 1.8 without impacting Ubuntu images at all. that said, I believe that GFX in ICS will require much more drivers than just PVR. there are new dss features in the ICS OMAP kernel, as well as new components such as dsscomp or ion which is required for GFX in ICS. I would definitely recommend that we main a common base kernel used for Ubuntu and put the Android stuff in another branch as I am not sure if the android bits will impact Ubuntu GFX... it might be able to be managed with flags eventually, but let's start with a branch. -- You received this bug notification because you are a member of Linaro Release Team, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/894389 Title: SGX driver failing on ICS on tracking-panda Status in Linaro Android: New Status in Linaro Texas Instruments Landing Team: New Bug description: SGX driver is failing on tracking-panda build https://android-build.linaro.org/builds/~linaro-android/tracking-panda/ . The build is excluding the binaries from http://git.omapzoom.org/?p=device/ti/proprietary-open.git . After adding the binaries manually, ICS fails to boot with the error PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4652, drivers/gpu/pvr/bridged_pvr_bridge.c] [ 21.756896] PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4652, drivers/gpu/pvr/bridged_pvr_bridge.c] . the SGX driver and binaries need to be updated for ICS. To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-android/+bug/894389/+subscriptions

12 years, 11 months

[Bug 894389] Re: SGX driver failing on ICS on tracking-panda

by Scott Bambrough

It seems that the latest binaries available from Google rely on PVR DDK1.8. Currently we only have kernel source for PVR DDK1.7 in the TILT tree. Perhaps we should create a topic branch from the PVR DDK1.8 code in the AOSP kernel, and use the Google binarie for our Android release, since I see none forthcoming to Linaro in the immediate future. Maybe we can convince Nicholas to move the Ubuntu binaries in the PPA up to the same release; Andy and/or I can explore that with him. -- You received this bug notification because you are a member of Linaro Release Team, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/894389 Title: SGX driver failing on ICS on tracking-panda Status in Linaro Android: New Status in Linaro Texas Instruments Landing Team: New Bug description: SGX driver is failing on tracking-panda build https://android-build.linaro.org/builds/~linaro-android/tracking-panda/ . The build is excluding the binaries from http://git.omapzoom.org/?p=device/ti/proprietary-open.git . After adding the binaries manually, ICS fails to boot with the error PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4652, drivers/gpu/pvr/bridged_pvr_bridge.c] [ 21.756896] PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4652, drivers/gpu/pvr/bridged_pvr_bridge.c] . the SGX driver and binaries need to be updated for ICS. To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-android/+bug/894389/+subscriptions

12 years, 11 months

[Bug 753878] Re: Ubuntu image - icons and parts of screen disappear with Origen

by Angus Ainslie

** Changed in: linaro-landing-team-samsung Importance: Medium => Low -- You received this bug notification because you are a member of Linaro Release Team, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/753878 Title: Ubuntu image - icons and parts of screen disappear with Origen Status in Linaro Samsung Landing Team Project: Confirmed Status in Linaro Ubuntu Evaluation Builds: Confirmed Bug description: After booting the ubuntu desktop image parts of the display disappear. When the cursor goes over those regions they reappear To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-landing-team-samsung/+bug/753878/+subscri…

12 years, 11 months

[Bug 892240] Re: support armhf architecture

by Tom Gall

For what it's worth there's a small change to enable it for live-build as well. It "should" work with the a40 version I've put together, however it's untested as of yet. -- You received this bug notification because you are a member of linaro- infrastructure-drivers, which is the registrant for Linaro Offspring. https://bugs.launchpad.net/bugs/892240 Title: support armhf architecture Status in Linaro Offspring: New Status in Offspring Image Build System: New Bug description: The architectures supported by Offspring are i386, amd64, lpia and armel. There's some work on going to add armhf architecture for Ubuntu Precise. Could you add armhf architecture support so we can start building and evaluating images on our instance (ubuntu-build.linaro.org)? To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-offspring/+bug/892240/+subscriptions

12 years, 11 months

[Bug 893249] Re: [regression] no audio on quickstart with 11.11

by Ying-Chun Liu

I think we can write the init value in /var/lib/alas/asound.state -- You received this bug notification because you are a member of Linaro Release Team, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/893249 Title: [regression] no audio on quickstart with 11.11 Status in Linaro Freescale Landing Team Project: Triaged Status in Linaro Ubuntu Evaluation Builds: Confirmed Bug description: Speaker test runs without problems, however no audio is heard out the speakers. I've checked the speakers with my iPhone and audio works out the speakers fine there. root@linaro-ubuntu-desktop:~# speaker-test speaker-test 1.0.24.2 Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Rate set to 48000Hz (requested 48000Hz) Buffer size range from 64 to 16384 Period size range from 32 to 8192 Using max buffer size 16384 Periods = 4 was set period_size = 4096 was set buffer_size = 16384 0 - Front Left Time per period = 2.715889 0 - Front Left Time per period = 3.053705 0 - Front Left Time per period = 3.052924 0 - Front Left Time per period = 3.054781 0 - Front Left Time per period = 3.055311 0 - Front Left Time per period = 3.054824 0 - Front Left Time per period = 3.054824 0 - Front Left Time per period = 3.055365 0 - Front Left Time per period = 3.055354 0 - Front Left Time per period = 3.055391 0 - Front Left Time per period = 3.055341 0 - Front Left Time per period = 3.054605 0 - Front Left Time per period = 3.055563 0 - Front Left Time per period = 3.055407 0 - Front Left çTime per period = 3.056178 0 - Front Left Time per period = 3.053250 0 - Front Left ^C To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-landing-team-freescale/+bug/893249/+subsc…

12 years, 11 months

[Bug 894389] Re: SGX driver failing on ICS on tracking-panda

by Anmar Oueja

** Changed in: linaro-landing-team-ti Assignee: (unassigned) => warmcat (andy-warmcat) -- You received this bug notification because you are a member of Linaro Release Team, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/894389 Title: SGX driver failing on ICS on tracking-panda Status in Linaro Android: New Status in Linaro Texas Instruments Landing Team: New Bug description: SGX driver is failing on tracking-panda build https://android-build.linaro.org/builds/~linaro-android/tracking-panda/ . The build is excluding the binaries from http://git.omapzoom.org/?p=device/ti/proprietary-open.git . After adding the binaries manually, ICS fails to boot with the error PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4652, drivers/gpu/pvr/bridged_pvr_bridge.c] [ 21.756896] PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4652, drivers/gpu/pvr/bridged_pvr_bridge.c] . the SGX driver and binaries need to be updated for ICS. To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-android/+bug/894389/+subscriptions

12 years, 11 months

[Bug 880175] Re: No HW Gfx on Upstream Panda Build

by Anmar Oueja

*** This bug is a duplicate of bug 894389 *** https://bugs.launchpad.net/bugs/894389 ** This bug has been marked a duplicate of bug 894389 SGX driver failing on ICS on tracking-panda -- You received this bug notification because you are a member of Linaro Release Team, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/880175 Title: No HW Gfx on Upstream Panda Build Status in Linaro Android: Confirmed Status in Linaro Texas Instruments Landing Team: New Bug description: There's no hw gfx on the upstream panda build. To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-android/+bug/880175/+subscriptions

12 years, 11 months

[Bug 898550] Re: iMX53 : Android image creation on SD card fails

by Fathi Boudra

** No longer affects: linaro-android -- You received this bug notification because you are a member of Linaro Release Team, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/898550 Title: iMX53 : Android image creation on SD card fails Status in Linaro Image Tools: Fix Committed Bug description: Description: ========== Creating Android image on sd card fails. Error message: " No space left on device" Reproducible: =========== Yes, 5/5 time IMPACT: ======== Can't get started with Android image on iMX53 Steps: ========== 1.Download : system.tar.bz2 , boot.tar.bz2 and userdata.tar.bz2 from: https://android-build.linaro.org/builds/~linaro-android/staging-imx53/#buil… 2. download latest l-a-m-c tool bzr branch lp:linaro-image-tools 3. Connect SD card to host machine(detected as /mnt/sdb in my case) and run command: ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdb --dev mx53loco --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2 OR ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdb --dev iMX53 --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2 Issue: Image creation failed at: 211344 bytes (211 kB) copied, 0.0865144 s, 2.4 MB/s mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/fr-FR_nk0_sg.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/fr-FR_ta.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/de-DE_gl0_sg.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/en-GB_kh0_sg.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/en-US_lh0_sg.bin': No space left on device Hardware: ========== 8GB SD card /tried with 16GB sd card as well. Software: ========== https://android-build.linaro.org/builds/~linaro-android/staging-imx53/#buil… Logs: ====== ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdb --dev mx53loco --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2 I see... Device Mount point Size /dev/sda none 238475MB /dev/sda1 / 234483MB /dev/sda2 none 3990MB /dev/sda5 none 3990MB /dev/sdb none 15193MB /dev/sdc none 0MB /dev/sdd none 0MB /dev/sr0 none 0MB Are you 100% sure, on selecting [/dev/sdb] (y/n)? y Checking that no-one is using this disk right now ... OK Warning: bad partition start (earliest 794625) Warning: partition 4 does not end at a cylinder boundary If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).) Formating boot partition mkfs.vfat 3.0.9 (31 Jan 2010) mke2fs 1.41.14 (22-Dec-2010) Filesystem label=userdata OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 131072 inodes, 524272 blocks 26213 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67633152 64 block groups 8192 blocks per group, 8192 fragments per group 2048 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 29 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. mke2fs 1.41.14 (22-Dec-2010) Filesystem label=cache OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 65536 inodes, 262128 blocks 13106 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67371008 32 block groups 8192 blocks per group, 8192 fragments per group 2048 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185 Writing inode tables: done Creating journal (4096 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 20 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. mke2fs 1.41.14 (22-Dec-2010) Filesystem label=system OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 65536 inodes, 262144 blocks 13107 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67371008 32 block groups 8192 blocks per group, 8192 fragments per group 2048 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 29 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. mkfs.vfat 3.0.9 (31 Jan 2010) Image Name: boot script Created: Wed Nov 30 20:37:03 2011 Image Type: ARM Linux Script (uncompressed) Data Size: 357 Bytes = 0.35 kB = 0.00 MB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 349 Bytes = 0.34 kB = 0.00 MB 412+1 records in 412+1 records out 211344 bytes (211 kB) copied, 0.0865144 s, 2.4 MB/s mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/fr-FR_nk0_sg.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/fr-FR_ta.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/de-DE_gl0_sg.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/en-GB_kh0_sg.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/en-US_lh0_sg.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/it-IT_cm0_sg.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/es-ES_zl0_sg.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/tts/lang_pico/de-DE_ta.bin': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/usr/keylayout/Vendor_045e_Product_028e.kl': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/usr/keylayout/Vendor_046d_Product_c532.kl': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/usr/keylayout/Vendor_046d_Product_c299.kl': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/usr/keylayout/Vendor_046d_Product_c294.kl': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/usr/keylayout/qwerty.kl': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/usr/keylayout/Vendor_046d_Product_c216.kl': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/usr/keylayout/Vendor_05ac_Product_0239.kl': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/usr/keylayout/Vendor_22b8_Product_093d.kl': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/usr/keylayout/Vendor_054c_Product_0268.kl': No space left on device mv: writing `/tmp/tmpt5F9W9/system-disc/usr/keylayout/Generic.kl': No space left on device mv: cannot create directory `/tmp/tmpt5F9W9/system-disc/usr/share': No space left on device mv: cannot create directory `/tmp/tmpt5F9W9/system-disc/usr/icu': No space left on device mv: cannot create directory `/tmp/tmpt5F9W9/system-disc/usr/idc': No space left on device mv: cannot create directory `/tmp/tmpt5F9W9/system-disc/usr/keychars': No space left on device mv: cannot create directory `/tmp/tmpt5F9W9/system-disc/usr/srec': No space left on device mv: cannot create directory `/tmp/tmpt5F9W9/system-disc/xbin': No space left on device Traceback (most recent call last): File "./linaro-image-tools/linaro-android-media-create", line 145, in <module> populate_partition(SYSTEM_DIR + "/system", SYSTEM_DISK, system_partition) File "/home/user1/Downloads/11.11/celanup/staging-imx53/86/again/linaro-image-tools/linaro_image_tools/media_create/rootfs.py", line 32, in populate_partition move_contents(content_dir, root_disk) File "/home/user1/Downloads/11.11/celanup/staging-imx53/86/again/linaro-image-tools/linaro_image_tools/media_create/rootfs.py", line 151, in move_contents cmd_runner.run(mv_cmd, as_root=True).wait() File "/home/user1/Downloads/11.11/celanup/staging-imx53/86/again/linaro-image-tools/linaro_image_tools/cmd_runner.py", line 100, in wait raise SubcommandNonZeroReturnValue(self._my_args, returncode) linaro_image_tools.cmd_runner.SubcommandNonZeroReturnValue: Sub process "['sudo', '-E', 'mv', '/tmp/tmpt5F9W9/system/system/app', '/tmp/tmpt5F9W9/system/system/bin', '/tmp/tmpt5F9W9/system/system/build.prop', '/tmp/tmpt5F9W9/system/system/etc', '/tmp/tmpt5F9W9/system/system/fonts', '/tmp/tmpt5F9W9/system/system/framework', '/tmp/tmpt5F9W9/system/system/include', '/tmp/tmpt5F9W9/system/system/lib', '/tmp/tmpt5F9W9/system/system/media', '/tmp/tmpt5F9W9/system/system/modules', '/tmp/tmpt5F9W9/system/system/share', '/tmp/tmpt5F9W9/system/system/tts', '/tmp/tmpt5F9W9/system/system/usr', '/tmp/tmpt5F9W9/system/system/xbin', '/tmp/tmpt5F9W9/system-disc']" returned a non-zero value: 1 ========== To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-image-tools/+bug/898550/+subscriptions

12 years, 11 months

[Bug 880175] [NEW] No HW Gfx on Upstream Panda Build

by Launchpad Bug Tracker

You have been subscribed to a public bug by Zach Pfeffer (pfefferz): There's no hw gfx on the upstream panda build. ** Affects: linaro-android Importance: High Assignee: vishal (vishalbhoj) Status: Confirmed ** Affects: linaro-landing-team-ti Importance: Undecided Status: New ** Tags: hwgfx linaro-android panda-4460-mainline panda-4460-staging panda-mainline -- No HW Gfx on Upstream Panda Build https://bugs.launchpad.net/bugs/880175 You received this bug notification because you are a member of Linaro Release Team, which is subscribed to the bug report.

12 years, 11 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-release December 2011