Adding linaro-release and the QA team
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.orgwrote:
Sorry, forgot to add David. Adding him now.
On 23 August 2012 12:56, Zach Pfeffer zach.pfeffer@linaro.org wrote:
The following baselines should be good to go by tomorrow (2012/8/24):
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc...
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
There's a final change to make ECM show up on the UI.
Tixy can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
Amit, can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc...
Vishal can you boot test,
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
Patrik would you boot test,
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
I'l boot test,
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
Bero would you boot test,
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
Would boot testers put their results in
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnpUtxWjZbP9dGg0dW...
Would boot testers also make sure that the instructions for programming the builds look good?
Paul, these or later builds should be good to go for Friday.
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
On Thu, 2012-08-23 at 13:54 -0500, Paul Larson wrote:
Adding linaro-release and the QA team
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.org wrote: Sorry, forgot to add David. Adding him now. On 23 August 2012 12:56, Zach Pfeffer zach.pfeffer@linaro.org wrote: > The following baselines should be good to go by tomorrow (2012/8/24): >
[...]
> Tixy can you boot test, > https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=19
That build is looking good. (On the first boot when initially trying to launch the Browser I had a couple of those 'Launcher not responding' problems which I haven't seen for quite some time, but that's a minor issue.)
On Thu, 2012-08-23 at 22:20 +0100, Jon Medhurst (Tixy) wrote:
On Thu, 2012-08-23 at 13:54 -0500, Paul Larson wrote:
Adding linaro-release and the QA team
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.org wrote: Sorry, forgot to add David. Adding him now. On 23 August 2012 12:56, Zach Pfeffer zach.pfeffer@linaro.org wrote: > The following baselines should be good to go by tomorrow (2012/8/24): >
[...]
> Tixy can you boot test, > https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=19That build is looking good.
Actually, after booting this on TC2 a few more times I have had two re-occurrences of the boot death I thought I had fixed yesterday. This is related to the power management features I enabled by default, so I think I'm doing to have to revert that patch completely. Which will warrant a respin of the builds...
On Fri, 2012-08-24 at 10:25 +0100, Jon Medhurst (Tixy) wrote:
On Thu, 2012-08-23 at 22:20 +0100, Jon Medhurst (Tixy) wrote:
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.org wrote: > Tixy can you boot test, > https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
That build is looking good.
Actually, after booting this on TC2 a few more times I have had two re-occurrences of the boot death I thought I had fixed yesterday. This is related to the power management features I enabled by default, so I think I'm doing to have to revert that patch completely. Which will warrant a respin of the builds...
Actually, the problem is that there was a mismerge when my TC2 fix was pulled into linux-linaro, so once that is remedied I will kick off another Android build.
I cant boot vexpress, can someone else try it ??
Regards, Amit
On 24 August 2012 15:38, Jon Medhurst (Tixy) tixy@linaro.org wrote:
On Fri, 2012-08-24 at 10:25 +0100, Jon Medhurst (Tixy) wrote:
On Thu, 2012-08-23 at 22:20 +0100, Jon Medhurst (Tixy) wrote:
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.org wrote:
> Tixy can you boot test, >https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
That build is looking good.
Actually, after booting this on TC2 a few more times I have had two re-occurrences of the boot death I thought I had fixed yesterday. This is related to the power management features I enabled by default, so I think I'm doing to have to revert that patch completely. Which will warrant a respin of the builds...
Actually, the problem is that there was a mismerge when my TC2 fix was pulled into linux-linaro, so once that is remedied I will kick off another Android build.
-- Tixy
On Fri, 2012-08-24 at 16:43 +0530, amit khare wrote:
I cant boot vexpress, can someone else try it ??
You mean someone besides myself who successfully booted it on A9 but had TC2 problems as mentioned below. The build also has results from LAVA, so it must have booted it too.
Are you using the pre-built image? (I didn't try that, just the tarballs).
On 23 August 2012 13:54, Paul Larson paul.larson@linaro.org wrote:
Adding linaro-release and the QA team
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Sorry, forgot to add David. Adding him now.
On 23 August 2012 12:56, Zach Pfeffer zach.pfeffer@linaro.org wrote:
The following baselines should be good to go by tomorrow (2012/8/24):
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc...
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
There's a final change to make ECM show up on the UI.
Tixy can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar... Amit, can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc... Vishal can you boot test,
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-... Patrik would you boot test,
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig... I'l boot test, https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
Looks good.
Bero would you boot test,
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
Would boot testers put their results in
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnpUtxWjZbP9dGg0dW...
Would boot testers also make sure that the instructions for programming the builds look good?
Paul, these or later builds should be good to go for Friday.
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
Will be out tomorrow btw. Vishal and Bero can handle any issues that come up.
On 23 August 2012 13:54, Paul Larson paul.larson@linaro.org wrote:
Adding linaro-release and the QA team
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Sorry, forgot to add David. Adding him now.
On 23 August 2012 12:56, Zach Pfeffer zach.pfeffer@linaro.org wrote:
The following baselines should be good to go by tomorrow (2012/8/24):
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc...
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
There's a final change to make ECM show up on the UI.
Tixy can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar... Amit, can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc... Vishal can you boot test,
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-... Patrik would you boot test,
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig... I'l boot test, https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams... Bero would you boot test,
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
Would boot testers put their results in
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnpUtxWjZbP9dGg0dW...
Would boot testers also make sure that the instructions for programming the builds look good?
Paul, these or later builds should be good to go for Friday.
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
Mathiue,
Looks like Patrik Ryd didn't test Snowball. Would you test it and put the result in (and on email):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnpUtxWjZbP9dGg0dW...
Should be build:
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig... (latest)
Back to vacation day...
On 23 August 2012 20:46, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Will be out tomorrow btw. Vishal and Bero can handle any issues that come up.
On 23 August 2012 13:54, Paul Larson paul.larson@linaro.org wrote:
Adding linaro-release and the QA team
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Sorry, forgot to add David. Adding him now.
On 23 August 2012 12:56, Zach Pfeffer zach.pfeffer@linaro.org wrote:
The following baselines should be good to go by tomorrow (2012/8/24):
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc...
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
There's a final change to make ECM show up on the UI.
Tixy can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar... Amit, can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc... Vishal can you boot test,
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-... Patrik would you boot test,
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig... I'l boot test, https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams... Bero would you boot test,
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
Would boot testers put their results in
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnpUtxWjZbP9dGg0dW...
Would boot testers also make sure that the instructions for programming the builds look good?
Paul, these or later builds should be good to go for Friday.
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
Patrik/Mathieu,
Looks like the u-boot update instructions or the riff command is causing me issues. I'm following the "SD card only" instructions with a few additions for clarity on build
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
and I'm getting:
$sudo riff -v -f snowball-image
----------------------- riff - Raw Image File Flasher ------------------------- Version: 0.5.1 Flash a device. Try `riff --help' for more information. ------------------------------------------------------------------------------- 21:19:35 - Using config file /usr/share/riff/config 21:19:35 - Listening on USB for device connection... 21:19:40 - Device detected on USB@0 21:19:40 - Connected Device@0 21:19:40 - Initializing device... 21:19:40 - UNKNOWN token 21:19:40 - PWR_MGT token 21:19:40 - PWR_MGT sent 21:19:40 - X-LOADER token 21:19:40 - X-LOADER sent 21:19:40 - MEM_INIT token 21:19:40 - MEM_INIT sent 21:19:40 - UNKNOWN token 21:19:40 - NORMAL token 21:19:40 - NORMAL sent 21:19:40 - Hardware Initialization finished 21:19:40 - Starting initialization of LCD... 21:19:40 - LCD initialization finished successfully 21:19:40 - Progress listener added successfully 21:19:40 - Loader successfully started 21:19:40 - Version: $Id: May 23 2012 17:11:08 FlashLoader 8500 HW:V2 SECURITY:false LDR:u8500-android-4.0_v5.99-20-gf75 21:19:40 - Protocol: 10 21:19:40 - Flashing raw image... 21:19:40 - Filesize: 1572864000 libusb:error [submit_bulk_transfer] submiturb failed error -1 errno=12 libusb:warning [do_sync_bulk_transfer] unrecognised status code 1 libusb:warning [do_sync_bulk_transfer] unrecognised status code 1 21:20:11 - Disconnect detected on USB@0 21:20:11 - Disconnected Device@0
^C21:20:35 - Program interrupted... 21:20:35 - Program interrupted... ^C21:20:36 - Program interrupted... 21:20:36 - Program interrupted...
Modified instructions:
Download startupfiles_3.0.8-0.tar.gz from http://www.igloocommunity.org/download/linaro/startupfiles/latest
tar -xvf startupfiles_3.0.8-0.tar.gz
sudo ./linaro-image-tools/linaro-android-media-create --image-file snowball-image --image-size 1500M --dev snowball_emmc --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2
sudo add-apt-repository ppa:igloocommunity-maintainers/snowball-tools sudo apt-get update sudo apt-get install riff # remove PPA (optional) sudo add-apt-repository --remove ppa:igloocommunity-maintainers/snowball-tools # Turn off device sudo riff -f snowball-image # Connect your board using the OTG USB port(next to power supply port) to your PC. # Turn on device # Riff will detect the board and start the execution. # When execution is finalized riff will exit.
Mathieu have you seen this riff issue? Patrik, it looks like there were some instructions missing with getting riff, I've filled in based on the older instructions, but am I missing anything else?
On 24 August 2012 16:22, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Mathiue,
Looks like Patrik Ryd didn't test Snowball. Would you test it and put the result in (and on email):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnpUtxWjZbP9dGg0dW...
Should be build:
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig... (latest)
Back to vacation day...
On 23 August 2012 20:46, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Will be out tomorrow btw. Vishal and Bero can handle any issues that come up.
On 23 August 2012 13:54, Paul Larson paul.larson@linaro.org wrote:
Adding linaro-release and the QA team
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Sorry, forgot to add David. Adding him now.
On 23 August 2012 12:56, Zach Pfeffer zach.pfeffer@linaro.org wrote:
The following baselines should be good to go by tomorrow (2012/8/24):
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc...
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
There's a final change to make ECM show up on the UI.
Tixy can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar... Amit, can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc... Vishal can you boot test,
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-... Patrik would you boot test,
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig... I'l boot test, https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams... Bero would you boot test,
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
Would boot testers put their results in
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnpUtxWjZbP9dGg0dW...
Would boot testers also make sure that the instructions for programming the builds look good?
Paul, these or later builds should be good to go for Friday.
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
On 25 August 2012 04:25, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Modified instructions:
Download startupfiles_3.0.8-0.tar.gz from http://www.igloocommunity.org/download/linaro/startupfiles/latest
tar -xvf startupfiles_3.0.8-0.tar.gz
sudo ./linaro-image-tools/linaro-android-media-create --image-file snowball-image --image-size 1500M --dev snowball_emmc --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2
sudo add-apt-repository ppa:igloocommunity-maintainers/snowball-tools sudo apt-get update sudo apt-get install riff # remove PPA (optional) sudo add-apt-repository --remove ppa:igloocommunity-maintainers/snowball-tools # Turn off device sudo riff -f snowball-image # Connect your board using the OTG USB port(next to power supply port) to your PC. # Turn on device # Riff will detect the board and start the execution.
# When execution is finalized riff will exit.
I have updated the build with your instructions, but I'm not sure about the startup files. I can't remember that I updated them. I will check with with igloo guys.
/Patrik
Mathieu have you seen this riff issue? Patrik, it looks like there were some instructions missing with getting riff, I've filled in based on the older instructions, but am I missing anything else?
On 24 August 2012 23:22, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Mathiue,
Looks like Patrik Ryd didn't test Snowball. Would you test it and put the result in (and on email):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnpUtxWjZbP9dGg0dW...
I tested it last week.
The result is on line 4 in the document.
Should be build:
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig... (latest)
The original instructions said build 36.
If you want I can test 37 as well as soon as I'm able to access http://snapshots.linaro.org.
/Patrik
Back to vacation day...
On 23 August 2012 20:46, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Will be out tomorrow btw. Vishal and Bero can handle any issues that
come up.
On 23 August 2012 13:54, Paul Larson paul.larson@linaro.org wrote:
Adding linaro-release and the QA team
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Sorry, forgot to add David. Adding him now.
On 23 August 2012 12:56, Zach Pfeffer zach.pfeffer@linaro.org wrote:
The following baselines should be good to go by tomorrow (2012/8/24):
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc...
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
There's a final change to make ECM show up on the UI.
Tixy can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
Amit, can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc...
Vishal can you boot test,
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
Patrik would you boot test,
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
I'l boot test,
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
Bero would you boot test,
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
Would boot testers put their results in
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnpUtxWjZbP9dGg0dW...
Would boot testers also make sure that the instructions for programming the builds look good?
Paul, these or later builds should be good to go for Friday.
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
On 24 August 2012 00:24, Paul Larson paul.larson@linaro.org wrote:
Adding linaro-release and the QA team
On Thu, Aug 23, 2012 at 1:04 PM, Zach Pfeffer zach.pfeffer@linaro.orgwrote:
Sorry, forgot to add David. Adding him now.
On 23 August 2012 12:56, Zach Pfeffer zach.pfeffer@linaro.org wrote:
The following baselines should be good to go by tomorrow (2012/8/24):
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc...
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
There's a final change to make ECM show up on the UI.
Tixy can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-ar...
Amit, can you boot test,
https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-jb-gcc...
Vishal can you boot test,
https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
The build 36 was aborted and 37 was not built since daily build got triggered in between. I have tested build 38 and it looks good: https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-...
Patrik would you boot test,
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-ig...
I'l boot test,
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
Bero would you boot test,
https://android-build.linaro.org/builds/~linaro-android/galaxynexus-jb-gcc47...
Would boot testers put their results in
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnpUtxWjZbP9dGg0dW...
Would boot testers also make sure that the instructions for programming the builds look good?
Paul, these or later builds should be good to go for Friday.
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
linaro-release@lists.linaro.org
-
amit khare -
Jon Medhurst (Tixy) -
Patrik Ryd -
Paul Larson -
Vishal Bhoj -
Zach Pfeffer