OpenEmbedded

openembedded@lists.linaro.org

1 participants
652 discussions

building and booting into u-boot on the dragonboard 410c?

by Robert P. J. Day

before i get to installing and/or booting the linux image i build with openembedded, i'd like to boot simply to the appropriate u-boot binary for this target board. first, i've already bitbaked an absolutely stock "core-image-minimal" image for this board without issue using the meta-qcom layer at git://git.yoctoproject.org/meta-qcom although nicolas tells me that that layer is more generally maintained on github at: https://github.com/ndechesne/meta-qcom but that's easy enough to change. haven't booted into that image yet, just wanted to verify that the build worked with no problem and produced all the artifacts i expect from an OE build. worked flawlessly. to add u-boot to the build process, i went back and added the following lines to my local.conf: EXTRA_IMAGEDEPENDS += "u-boot" UBOOT_MACHINE = "dragonboard410c_config" again, build appeared to work perfectly, and generated the new artifact: u-boot-dragonboard-410c-2017.01-r0.bin so, again, looks good. at this point, it appears that the recipe for booting to u-boot is in the readme.txt file in the appropriate directory in the u-boot source: http://git.denx.de/?p=u-boot.git;a=blob;f=board/qualcomm/dragonboard410c/re… can anyone verify that that is still the correct set of instructions? and as i read it, to get to "fastboot" mode, i don't need the FTDI connection, just USB OTG should do it, is that correct? is there a way to install the u-boot binary on the SD card and boot directly from there? rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================

9 years, 2 months

upcoming questions on building u-boot and OE for dragonboard 410c

by Robert P. J. Day

following up on a question i asked on the generic OE mailing list, and nicolas dechesne's extensive reply: http://lists.openembedded.org/pipermail/openembedded-core/2017-May/136547.h… i figured i might as well move the discussion here since most of my queries will be specific to that target board. briefly, i unpacked my new dragonboard, cabled it up, plugged it in and it popped into android as i expected it would, so i can at least verify that that part works. also, i have a fair bit of experience with ARM, openembedded and u-boot, so i'll try not to ask idiotic questions. first question coming shortly, might as well keep them modular and not try to ask everything at once. rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================

9 years, 2 months

[PATCH] ldconfig-native: remove local copy in favor of oe-core one

by Denys Dmytriyenko

From: Denys Dmytriyenko <denys(a)ti.com> They are mostly identical, but oe-core is more recent and has 2 extra patches: http://cgit.openembedded.org/openembedded-core/commit/?id=adbf0b1fdf897076e… http://cgit.openembedded.org/openembedded-core/commit/?id=0b0e4d7aa64feded0… Signed-off-by: Denys Dmytriyenko <denys(a)ti.com> --- .../glibc/ldconfig-native-2.12.1/32and64bit.patch | 331 --------------- .../glibc/ldconfig-native-2.12.1/README | 8 - .../endian-ness_handling.patch | 454 -------------------- .../ldconfig-native-2.12.1/endianess-header.patch | 113 ----- .../glibc/ldconfig-native-2.12.1/flag_fix.patch | 24 -- .../ldconfig-default-to-all-multilib-dirs.patch | 37 -- .../ldconfig-native-2.12.1.tar.bz2 | Bin 21491 -> 0 bytes .../glibc/ldconfig-native-2.12.1/ldconfig.patch | 471 --------------------- .../ldconfig_aux-cache_path_fix.patch | 36 -- .../recipes-core/glibc/ldconfig-native_2.12.1.bb | 32 -- 10 files changed, 1506 deletions(-) delete mode 100644 meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/32and64bit.patch delete mode 100644 meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/README delete mode 100644 meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/endian-ness_handling.patch delete mode 100644 meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/endianess-header.patch delete mode 100644 meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/flag_fix.patch delete mode 100644 meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig-default-to-all-multilib-dirs.patch delete mode 100644 meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig-native-2.12.1.tar.bz2 delete mode 100644 meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig.patch delete mode 100644 meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig_aux-cache_path_fix.patch delete mode 100644 meta-linaro-toolchain/recipes-core/glibc/ldconfig-native_2.12.1.bb diff --git a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/32and64bit.patch b/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/32and64bit.patch deleted file mode 100644 index cdfeaea..0000000 --- a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/32and64bit.patch +++ /dev/null @@ -1,331 +0,0 @@ -Upstream-Status: Inappropriate [embedded specific] - -We run the ldconfig in the cross fashion. make the code bitsize aware so that -we can cross build ldconfig cache for various architectures. - -Richard Purdie <richard.purdie(a)linuxfoundation.org> 2009/05/19 -Nitin A Kamble <nitin.a.kamble(a)intel.com> 2009/03/29 - -Index: ldconfig-native-2.12.1/readelflib.c -=================================================================== ---- ldconfig-native-2.12.1.orig/readelflib.c -+++ ldconfig-native-2.12.1/readelflib.c -@@ -40,39 +40,212 @@ do \ - - /* Returns 0 if everything is ok, != 0 in case of error. */ - int --process_elf_file (const char *file_name, const char *lib, int *flag, -+process_elf_file32 (const char *file_name, const char *lib, int *flag, - unsigned int *osversion, char **soname, void *file_contents, - size_t file_length) - { - int i; - unsigned int j; -- ElfW(Addr) loadaddr; -+ Elf32_Addr loadaddr; - unsigned int dynamic_addr; - size_t dynamic_size; - char *program_interpreter; - -- ElfW(Ehdr) *elf_header; -- ElfW(Phdr) *elf_pheader, *segment; -- ElfW(Dyn) *dynamic_segment, *dyn_entry; -+ Elf32_Ehdr *elf_header; -+ Elf32_Phdr *elf_pheader, *segment; -+ Elf32_Dyn *dynamic_segment, *dyn_entry; - char *dynamic_strings; - -- elf_header = (ElfW(Ehdr) *) file_contents; -+ elf_header = (Elf32_Ehdr *) file_contents; - *osversion = 0; - -- if (elf_header->e_ident [EI_CLASS] != ElfW (CLASS)) -+ if (elf_header->e_type != ET_DYN) - { -- if (opt_verbose) -+ error (0, 0, _("%s is not a shared object file (Type: %d).\n"), file_name, -+ elf_header->e_type); -+ return 1; -+ } -+ -+ /* Get information from elf program header. */ -+ elf_pheader = (Elf32_Phdr *) (elf_header->e_phoff + file_contents); -+ check_ptr (elf_pheader); -+ -+ /* The library is an elf library, now search for soname and -+ libc5/libc6. */ -+ *flag = FLAG_ELF; -+ -+ loadaddr = -1; -+ dynamic_addr = 0; -+ dynamic_size = 0; -+ program_interpreter = NULL; -+ for (i = 0, segment = elf_pheader; -+ i < elf_header->e_phnum; i++, segment++) -+ { -+ check_ptr (segment); -+ -+ switch (segment->p_type) - { -- if (elf_header->e_ident [EI_CLASS] == ELFCLASS32) -- error (0, 0, _("%s is a 32 bit ELF file.\n"), file_name); -- else if (elf_header->e_ident [EI_CLASS] == ELFCLASS64) -- error (0, 0, _("%s is a 64 bit ELF file.\n"), file_name); -- else -- error (0, 0, _("Unknown ELFCLASS in file %s.\n"), file_name); -+ case PT_LOAD: -+ if (loadaddr == (Elf32_Addr) -1) -+ loadaddr = segment->p_vaddr - segment->p_offset; -+ break; -+ -+ case PT_DYNAMIC: -+ if (dynamic_addr) -+ error (0, 0, _("more than one dynamic segment\n")); -+ -+ dynamic_addr = segment->p_offset; -+ dynamic_size = segment->p_filesz; -+ break; -+ -+ case PT_INTERP: -+ program_interpreter = (char *) (file_contents + segment->p_offset); -+ check_ptr (program_interpreter); -+ -+ /* Check if this is enough to classify the binary. */ -+ for (j = 0; j < sizeof (interpreters) / sizeof (interpreters [0]); -+ ++j) -+ if (strcmp (program_interpreter, interpreters[j].soname) == 0) -+ { -+ *flag = interpreters[j].flag; -+ break; -+ } -+ break; -+ -+ case PT_NOTE: -+ if (!*osversion && segment->p_filesz >= 32 && segment->p_align >= 4) -+ { -+ Elf32_Word *abi_note = (Elf32_Word *) (file_contents -+ + segment->p_offset); -+ Elf32_Addr size = segment->p_filesz; -+ -+ while (abi_note [0] != 4 || abi_note [1] != 16 -+ || abi_note [2] != 1 -+ || memcmp (abi_note + 3, "GNU", 4) != 0) -+ { -+#define ROUND(len) (((len) + sizeof (Elf32_Word)) - 1) & -sizeof (Elf32_Word))) -+ Elf32_Addr) note_size = 3 * sizeof (Elf32_Word)) -+ + ROUND (abi_note[0]) -+ + ROUND (abi_note[1]); -+ -+ if (size - 32 < note_size || note_size == 0) -+ { -+ size = 0; -+ break; -+ } -+ size -= note_size; -+ abi_note = (void *) abi_note + note_size; -+ } -+ -+ if (size == 0) -+ break; -+ -+ *osversion = (abi_note [4] << 24) | -+ ((abi_note [5] & 0xff) << 16) | -+ ((abi_note [6] & 0xff) << 8) | -+ (abi_note [7] & 0xff); -+ } -+ break; -+ -+ default: -+ break; -+ } -+ -+ } -+ if (loadaddr == (Elf32_Addr) -1) -+ { -+ /* Very strange. */ -+ loadaddr = 0; -+ } -+ -+ /* Now we can read the dynamic sections. */ -+ if (dynamic_size == 0) -+ return 1; -+ -+ dynamic_segment = (Elf32_Dyn *) (file_contents + dynamic_addr); -+ check_ptr (dynamic_segment); -+ -+ /* Find the string table. */ -+ dynamic_strings = NULL; -+ for (dyn_entry = dynamic_segment; dyn_entry->d_tag != DT_NULL; -+ ++dyn_entry) -+ { -+ check_ptr (dyn_entry); -+ if (dyn_entry->d_tag == DT_STRTAB) -+ { -+ dynamic_strings = (char *) (file_contents + dyn_entry->d_un.d_val - loadaddr); -+ check_ptr (dynamic_strings); -+ break; - } -- return 1; - } - -+ if (dynamic_strings == NULL) -+ return 1; -+ -+ /* Now read the DT_NEEDED and DT_SONAME entries. */ -+ for (dyn_entry = dynamic_segment; dyn_entry->d_tag != DT_NULL; -+ ++dyn_entry) -+ { -+ if (dyn_entry->d_tag == DT_NEEDED || dyn_entry->d_tag == DT_SONAME) -+ { -+ char *name = dynamic_strings + dyn_entry->d_un.d_val; -+ check_ptr (name); -+ -+ if (dyn_entry->d_tag == DT_NEEDED) -+ { -+ -+ if (*flag == FLAG_ELF) -+ { -+ /* Check if this is enough to classify the binary. */ -+ for (j = 0; -+ j < sizeof (known_libs) / sizeof (known_libs [0]); -+ ++j) -+ if (strcmp (name, known_libs [j].soname) == 0) -+ { -+ *flag = known_libs [j].flag; -+ break; -+ } -+ } -+ } -+ -+ else if (dyn_entry->d_tag == DT_SONAME) -+ *soname = xstrdup (name); -+ -+ /* Do we have everything we need? */ -+ if (*soname && *flag != FLAG_ELF) -+ return 0; -+ } -+ } -+ -+ /* We reach this point only if the file doesn't contain a DT_SONAME -+ or if we can't classify the library. If it doesn't have a -+ soname, return the name of the library. */ -+ if (*soname == NULL) -+ *soname = xstrdup (lib); -+ -+ return 0; -+} -+ -+int -+process_elf_file64 (const char *file_name, const char *lib, int *flag, -+ unsigned int *osversion, char **soname, void *file_contents, -+ size_t file_length) -+{ -+ int i; -+ unsigned int j; -+ Elf64_Addr loadaddr; -+ unsigned int dynamic_addr; -+ size_t dynamic_size; -+ char *program_interpreter; -+ -+ Elf64_Ehdr *elf_header; -+ Elf64_Phdr *elf_pheader, *segment; -+ Elf64_Dyn *dynamic_segment, *dyn_entry; -+ char *dynamic_strings; -+ -+ elf_header = (Elf64_Ehdr *) file_contents; -+ *osversion = 0; -+ - if (elf_header->e_type != ET_DYN) - { - error (0, 0, _("%s is not a shared object file (Type: %d).\n"), file_name, -@@ -81,7 +254,7 @@ process_elf_file (const char *file_name, - } - - /* Get information from elf program header. */ -- elf_pheader = (ElfW(Phdr) *) (elf_header->e_phoff + file_contents); -+ elf_pheader = (Elf64_Phdr *) (elf_header->e_phoff + file_contents); - check_ptr (elf_pheader); - - /* The library is an elf library, now search for soname and -@@ -100,7 +273,7 @@ process_elf_file (const char *file_name, - switch (segment->p_type) - { - case PT_LOAD: -- if (loadaddr == (ElfW(Addr)) -1) -+ if (loadaddr == (Elf64_Addr) -1) - loadaddr = segment->p_vaddr - segment->p_offset; - break; - -@@ -129,16 +302,16 @@ process_elf_file (const char *file_name, - case PT_NOTE: - if (!*osversion && segment->p_filesz >= 32 && segment->p_align >= 4) - { -- ElfW(Word) *abi_note = (ElfW(Word) *) (file_contents -+ Elf64_Word *abi_note = (Elf64_Word *) (file_contents - + segment->p_offset); -- ElfW(Addr) size = segment->p_filesz; -+ Elf64_Addr size = segment->p_filesz; - - while (abi_note [0] != 4 || abi_note [1] != 16 - || abi_note [2] != 1 - || memcmp (abi_note + 3, "GNU", 4) != 0) - { --#define ROUND(len) (((len) + sizeof (ElfW(Word)) - 1) & -sizeof (ElfW(Word))) -- ElfW(Addr) note_size = 3 * sizeof (ElfW(Word)) -+#define ROUND(len) (((len) + sizeof (Elf64_Word) - 1) & -sizeof (Elf64_Word)) -+ Elf64_Addr note_size = 3 * sizeof (Elf64_Word) - + ROUND (abi_note[0]) - + ROUND (abi_note[1]); - -@@ -166,7 +339,7 @@ process_elf_file (const char *file_name, - } - - } -- if (loadaddr == (ElfW(Addr)) -1) -+ if (loadaddr == (Elf64_Addr) -1) - { - /* Very strange. */ - loadaddr = 0; -@@ -176,7 +349,7 @@ process_elf_file (const char *file_name, - if (dynamic_size == 0) - return 1; - -- dynamic_segment = (ElfW(Dyn) *) (file_contents + dynamic_addr); -+ dynamic_segment = (Elf64_Dyn *) (file_contents + dynamic_addr); - check_ptr (dynamic_segment); - - /* Find the string table. */ -@@ -233,3 +406,33 @@ process_elf_file (const char *file_name, - - return 0; - } -+/* Returns 0 if everything is ok, != 0 in case of error. */ -+int -+process_elf_file (const char *file_name, const char *lib, int *flag, -+ unsigned int *osversion, char **soname, void *file_contents, -+ size_t file_length) -+{ -+ int i; -+ unsigned int j; -+ ElfW(Addr) loadaddr; -+ unsigned int dynamic_addr; -+ size_t dynamic_size; -+ char *program_interpreter; -+ -+ ElfW(Ehdr) *elf_header; -+ ElfW(Phdr) *elf_pheader, *segment; -+ ElfW(Dyn) *dynamic_segment, *dyn_entry; -+ char *dynamic_strings; -+ -+ elf_header = (ElfW(Ehdr) *) file_contents; -+ *osversion = 0; -+ -+ if (elf_header->e_ident [EI_CLASS] == ELFCLASS32) -+ return process_elf_file32(file_name, lib,flag, osversion, soname, file_contents, file_length); -+ else if (elf_header->e_ident [EI_CLASS] == ELFCLASS64) -+ return process_elf_file64(file_name, lib,flag, osversion, soname, file_contents, file_length); -+ error (0, 0, _("Unknown ELFCLASS in file %s.\n"), file_name); -+ return 1; -+} -+ -+ diff --git a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/README b/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/README deleted file mode 100644 index 43fb983..0000000 --- a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/README +++ /dev/null @@ -1,8 +0,0 @@ -The files are pulled verbatim from glibc 2.5 and then patched to allow -standalone compilation of ldconfig. - -Richard Purdie -OpenedHand Ltd. - -Upgraded the ldconfig recipe to eglibc 2.12.1 -Nitin A Kamble <nitin.a.kamble(a)intel.com> 2011/03/29 diff --git a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/endian-ness_handling.patch b/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/endian-ness_handling.patch deleted file mode 100644 index 7f8e4db..0000000 --- a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/endian-ness_handling.patch +++ /dev/null @@ -1,454 +0,0 @@ -Upstream-Status: Inappropriate [embedded specific] - -Do data input/output handling according to endien-ness of the library file. That -enables use of ldconfig in the cross fashion for any architecture. - -2011/04/04 -Richard Purdie <richard.purdie(a)linuxfoundation.org> -Nitin Kamble <nitin.a.kamble(a)intel.com> - -Index: ldconfig-native-2.12.1/readelflib.c -=================================================================== ---- ldconfig-native-2.12.1.orig/readelflib.c -+++ ldconfig-native-2.12.1/readelflib.c -@@ -38,6 +38,28 @@ do \ - } \ - while (0); - -+int be; -+static uint16_t read16(uint16_t x, int be) -+{ -+ if (be) -+ return be16toh(x); -+ return le16toh(x); -+} -+ -+static uint32_t read32(uint32_t x, int be) -+{ -+ if (be) -+ return be32toh(x); -+ return le32toh(x); -+} -+ -+static uint64_t read64(uint64_t x, int be) -+{ -+ if (be) -+ return be64toh(x); -+ return le64toh(x); -+} -+ - /* Returns 0 if everything is ok, != 0 in case of error. */ - int - process_elf_file32 (const char *file_name, const char *lib, int *flag, -@@ -59,15 +81,17 @@ process_elf_file32 (const char *file_nam - elf_header = (Elf32_Ehdr *) file_contents; - *osversion = 0; - -- if (elf_header->e_type != ET_DYN) -+ be = (elf_header->e_ident[EI_DATA] == ELFDATA2MSB); -+ -+ if (read16(elf_header->e_type, be) != ET_DYN) - { - error (0, 0, _("%s is not a shared object file (Type: %d).\n"), file_name, -- elf_header->e_type); -+ read16(elf_header->e_type, be)); - return 1; - } - - /* Get information from elf program header. */ -- elf_pheader = (Elf32_Phdr *) (elf_header->e_phoff + file_contents); -+ elf_pheader = (Elf32_Phdr *) (read32(elf_header->e_phoff, be) + file_contents); - check_ptr (elf_pheader); - - /* The library is an elf library, now search for soname and -@@ -79,27 +103,27 @@ process_elf_file32 (const char *file_nam - dynamic_size = 0; - program_interpreter = NULL; - for (i = 0, segment = elf_pheader; -- i < elf_header->e_phnum; i++, segment++) -+ i < read16(elf_header->e_phnum, be); i++, segment++) - { - check_ptr (segment); - -- switch (segment->p_type) -+ switch (read32(segment->p_type, be)) - { - case PT_LOAD: - if (loadaddr == (Elf32_Addr) -1) -- loadaddr = segment->p_vaddr - segment->p_offset; -+ loadaddr = read32(segment->p_vaddr, be) - read32(segment->p_offset, be); - break; - - case PT_DYNAMIC: - if (dynamic_addr) - error (0, 0, _("more than one dynamic segment\n")); - -- dynamic_addr = segment->p_offset; -- dynamic_size = segment->p_filesz; -+ dynamic_addr = read32(segment->p_offset, be); -+ dynamic_size = read32(segment->p_filesz, be); - break; - - case PT_INTERP: -- program_interpreter = (char *) (file_contents + segment->p_offset); -+ program_interpreter = (char *) (file_contents + read32(segment->p_offset, be)); - check_ptr (program_interpreter); - - /* Check if this is enough to classify the binary. */ -@@ -113,20 +137,20 @@ process_elf_file32 (const char *file_nam - break; - - case PT_NOTE: -- if (!*osversion && segment->p_filesz >= 32 && segment->p_align >= 4) -+ if (!*osversion && read32(segment->p_filesz, be) >= 32 && segment->p_align >= 4) - { - Elf32_Word *abi_note = (Elf32_Word *) (file_contents -- + segment->p_offset); -- Elf32_Addr size = segment->p_filesz; -+ + read32(segment->p_offset, be)); -+ Elf32_Addr size = read32(segment->p_filesz, be); - -- while (abi_note [0] != 4 || abi_note [1] != 16 -- || abi_note [2] != 1 -+ while (read32(abi_note [0], be) != 4 || read32(abi_note [1], be) != 16 -+ || read32(abi_note [2], be) != 1 - || memcmp (abi_note + 3, "GNU", 4) != 0) - { --#define ROUND(len) (((len) + sizeof (Elf32_Word)) - 1) & -sizeof (Elf32_Word))) -- Elf32_Addr) note_size = 3 * sizeof (Elf32_Word)) -- + ROUND (abi_note[0]) -- + ROUND (abi_note[1]); -+#define ROUND(len) (((len) + sizeof (Elf32_Word) - 1) & -sizeof (Elf32_Word)) -+ Elf32_Addr note_size = 3 * sizeof (Elf32_Word) -+ + ROUND (read32(abi_note[0], be)) -+ + ROUND (read32(abi_note[1], be)); - - if (size - 32 < note_size || note_size == 0) - { -@@ -140,10 +164,10 @@ process_elf_file32 (const char *file_nam - if (size == 0) - break; - -- *osversion = (abi_note [4] << 24) | -- ((abi_note [5] & 0xff) << 16) | -- ((abi_note [6] & 0xff) << 8) | -- (abi_note [7] & 0xff); -+ *osversion = (read32(abi_note [4], be) << 24) | -+ ((read32(abi_note [5], be) & 0xff) << 16) | -+ ((read32(abi_note [6], be) & 0xff) << 8) | -+ (read32(abi_note [7], be) & 0xff); - } - break; - -@@ -167,13 +191,13 @@ process_elf_file32 (const char *file_nam - - /* Find the string table. */ - dynamic_strings = NULL; -- for (dyn_entry = dynamic_segment; dyn_entry->d_tag != DT_NULL; -+ for (dyn_entry = dynamic_segment; read32(dyn_entry->d_tag, be) != DT_NULL; - ++dyn_entry) - { - check_ptr (dyn_entry); -- if (dyn_entry->d_tag == DT_STRTAB) -+ if (read32(dyn_entry->d_tag, be) == DT_STRTAB) - { -- dynamic_strings = (char *) (file_contents + dyn_entry->d_un.d_val - loadaddr); -+ dynamic_strings = (char *) (file_contents + read32(dyn_entry->d_un.d_val, be) - loadaddr); - check_ptr (dynamic_strings); - break; - } -@@ -183,15 +207,15 @@ process_elf_file32 (const char *file_nam - return 1; - - /* Now read the DT_NEEDED and DT_SONAME entries. */ -- for (dyn_entry = dynamic_segment; dyn_entry->d_tag != DT_NULL; -+ for (dyn_entry = dynamic_segment; read32(dyn_entry->d_tag, be) != DT_NULL; - ++dyn_entry) - { -- if (dyn_entry->d_tag == DT_NEEDED || dyn_entry->d_tag == DT_SONAME) -+ if (read32(dyn_entry->d_tag, be) == DT_NEEDED || read32(dyn_entry->d_tag, be) == DT_SONAME) - { -- char *name = dynamic_strings + dyn_entry->d_un.d_val; -+ char *name = dynamic_strings + read32(dyn_entry->d_un.d_val, be); - check_ptr (name); - -- if (dyn_entry->d_tag == DT_NEEDED) -+ if (read32(dyn_entry->d_tag, be) == DT_NEEDED) - { - - if (*flag == FLAG_ELF) -@@ -208,7 +232,7 @@ process_elf_file32 (const char *file_nam - } - } - -- else if (dyn_entry->d_tag == DT_SONAME) -+ else if (read32(dyn_entry->d_tag, be) == DT_SONAME) - *soname = xstrdup (name); - - /* Do we have everything we need? */ -@@ -246,15 +270,17 @@ process_elf_file64 (const char *file_nam - elf_header = (Elf64_Ehdr *) file_contents; - *osversion = 0; - -- if (elf_header->e_type != ET_DYN) -+ be = (elf_header->e_ident[EI_DATA] == ELFDATA2MSB); -+ -+ if (read16(elf_header->e_type, be) != ET_DYN) - { - error (0, 0, _("%s is not a shared object file (Type: %d).\n"), file_name, -- elf_header->e_type); -+ read16(elf_header->e_type, be)); - return 1; - } - - /* Get information from elf program header. */ -- elf_pheader = (Elf64_Phdr *) (elf_header->e_phoff + file_contents); -+ elf_pheader = (Elf64_Phdr *) (read64(elf_header->e_phoff, be) + file_contents); - check_ptr (elf_pheader); - - /* The library is an elf library, now search for soname and -@@ -266,27 +292,27 @@ process_elf_file64 (const char *file_nam - dynamic_size = 0; - program_interpreter = NULL; - for (i = 0, segment = elf_pheader; -- i < elf_header->e_phnum; i++, segment++) -+ i < read16(elf_header->e_phnum, be); i++, segment++) - { - check_ptr (segment); - -- switch (segment->p_type) -+ switch (read32(segment->p_type, be)) - { - case PT_LOAD: - if (loadaddr == (Elf64_Addr) -1) -- loadaddr = segment->p_vaddr - segment->p_offset; -+ loadaddr = read64(segment->p_vaddr, be) - read64(segment->p_offset, be); - break; - - case PT_DYNAMIC: - if (dynamic_addr) - error (0, 0, _("more than one dynamic segment\n")); - -- dynamic_addr = segment->p_offset; -- dynamic_size = segment->p_filesz; -+ dynamic_addr = read64(segment->p_offset, be); -+ dynamic_size = read32(segment->p_filesz, be); - break; - - case PT_INTERP: -- program_interpreter = (char *) (file_contents + segment->p_offset); -+ program_interpreter = (char *) (file_contents + read64(segment->p_offset, be)); - check_ptr (program_interpreter); - - /* Check if this is enough to classify the binary. */ -@@ -300,20 +326,21 @@ process_elf_file64 (const char *file_nam - break; - - case PT_NOTE: -- if (!*osversion && segment->p_filesz >= 32 && segment->p_align >= 4) -+ if (!*osversion && read32(segment->p_filesz, be) >= 32 && read32(segment->p_align, be) >= 4) - { - Elf64_Word *abi_note = (Elf64_Word *) (file_contents -- + segment->p_offset); -- Elf64_Addr size = segment->p_filesz; -+ + read64(segment->p_offset, be)); -+ Elf64_Addr size = read32(segment->p_filesz, be); - -- while (abi_note [0] != 4 || abi_note [1] != 16 -- || abi_note [2] != 1 -+ while (read32(abi_note [0], be) != 4 || read32(abi_note [1], be) != 16 -+ || read32(abi_note [2], be) != 1 - || memcmp (abi_note + 3, "GNU", 4) != 0) - { -+#undef ROUND - #define ROUND(len) (((len) + sizeof (Elf64_Word) - 1) & -sizeof (Elf64_Word)) - Elf64_Addr note_size = 3 * sizeof (Elf64_Word) -- + ROUND (abi_note[0]) -- + ROUND (abi_note[1]); -+ + ROUND (read32(abi_note[0], be)) -+ + ROUND (read32(abi_note[1], be)); - - if (size - 32 < note_size || note_size == 0) - { -@@ -327,10 +354,10 @@ process_elf_file64 (const char *file_nam - if (size == 0) - break; - -- *osversion = (abi_note [4] << 24) | -- ((abi_note [5] & 0xff) << 16) | -- ((abi_note [6] & 0xff) << 8) | -- (abi_note [7] & 0xff); -+ *osversion = (read32(abi_note [4], be) << 24) | -+ ((read32(abi_note [5], be) & 0xff) << 16) | -+ ((read32(abi_note [6], be) & 0xff) << 8) | -+ (read32(abi_note [7], be) & 0xff); - } - break; - -@@ -354,13 +381,13 @@ process_elf_file64 (const char *file_nam - - /* Find the string table. */ - dynamic_strings = NULL; -- for (dyn_entry = dynamic_segment; dyn_entry->d_tag != DT_NULL; -+ for (dyn_entry = dynamic_segment; read64(dyn_entry->d_tag, be) != DT_NULL; - ++dyn_entry) - { - check_ptr (dyn_entry); -- if (dyn_entry->d_tag == DT_STRTAB) -+ if (read64(dyn_entry->d_tag, be) == DT_STRTAB) - { -- dynamic_strings = (char *) (file_contents + dyn_entry->d_un.d_val - loadaddr); -+ dynamic_strings = (char *) (file_contents + read64(dyn_entry->d_un.d_val, be) - loadaddr); - check_ptr (dynamic_strings); - break; - } -@@ -370,15 +397,15 @@ process_elf_file64 (const char *file_nam - return 1; - - /* Now read the DT_NEEDED and DT_SONAME entries. */ -- for (dyn_entry = dynamic_segment; dyn_entry->d_tag != DT_NULL; -+ for (dyn_entry = dynamic_segment; read64(dyn_entry->d_tag, be) != DT_NULL; - ++dyn_entry) - { -- if (dyn_entry->d_tag == DT_NEEDED || dyn_entry->d_tag == DT_SONAME) -+ if (read64(dyn_entry->d_tag, be) == DT_NEEDED || read64(dyn_entry->d_tag, be) == DT_SONAME) - { -- char *name = dynamic_strings + dyn_entry->d_un.d_val; -+ char *name = dynamic_strings + read64(dyn_entry->d_un.d_val, be); - check_ptr (name); - -- if (dyn_entry->d_tag == DT_NEEDED) -+ if (read64(dyn_entry->d_tag, be) == DT_NEEDED) - { - - if (*flag == FLAG_ELF) -@@ -395,7 +422,7 @@ process_elf_file64 (const char *file_nam - } - } - -- else if (dyn_entry->d_tag == DT_SONAME) -+ else if (read64(dyn_entry->d_tag, be) == DT_SONAME) - *soname = xstrdup (name); - - /* Do we have everything we need? */ -Index: ldconfig-native-2.12.1/readlib.c -=================================================================== ---- ldconfig-native-2.12.1.orig/readlib.c -+++ ldconfig-native-2.12.1/readlib.c -@@ -169,7 +169,8 @@ process_file (const char *real_file_name - ret = 1; - } - /* Libraries have to be shared object files. */ -- else if (elf_header->e_type != ET_DYN) -+ else if ((elf_header->e_ident[EI_DATA] == ELFDATA2MSB && be16toh(elf_header->e_type) != ET_DYN) || -+ (elf_header->e_ident[EI_DATA] == ELFDATA2LSB && le16toh(elf_header->e_type) != ET_DYN)) - ret = 1; - else if (process_elf_file (file_name, lib, flag, osversion, soname, - file_contents, statbuf.st_size)) -Index: ldconfig-native-2.12.1/cache.c -=================================================================== ---- ldconfig-native-2.12.1.orig/cache.c -+++ ldconfig-native-2.12.1/cache.c -@@ -39,6 +39,29 @@ - # define N_(msgid) msgid - #define _(msg) msg - -+extern int be; -+ -+static uint16_t write16(uint16_t x, int be) -+{ -+ if (be) -+ return htobe16(x); -+ return htole16(x); -+} -+ -+static uint32_t write32(uint32_t x, int be) -+{ -+ if (be) -+ return htobe32(x); -+ return htole32(x); -+} -+ -+static uint64_t write64(uint64_t x, int be) -+{ -+ if (be) -+ return htobe64(x); -+ return htole64(x); -+} -+ - struct cache_entry - { - char *lib; /* Library name. */ -@@ -279,7 +302,12 @@ save_cache (const char *cache_name) - /* Number of normal cache entries. */ - int cache_entry_old_count = 0; - -- for (entry = entries; entry != NULL; entry = entry->next) -+ if (be) -+ printf("saving cache in big endian encoding\n"); -+ else -+ printf("saving cache in little endian encoding\n"); -+ -+ for (entry = entries; entry != NULL; entry = entry->next) - { - /* Account the final NULs. */ - total_strlen += strlen (entry->lib) + strlen (entry->path) + 2; -@@ -310,7 +338,7 @@ save_cache (const char *cache_name) - memset (file_entries, '\0', sizeof (struct cache_file)); - memcpy (file_entries->magic, CACHEMAGIC, sizeof CACHEMAGIC - 1); - -- file_entries->nlibs = cache_entry_old_count; -+ file_entries->nlibs = write32(cache_entry_old_count, be); - } - - struct cache_file_new *file_entries_new = NULL; -@@ -330,8 +358,8 @@ save_cache (const char *cache_name) - memcpy (file_entries_new->version, CACHE_VERSION, - sizeof CACHE_VERSION - 1); - -- file_entries_new->nlibs = cache_entry_count; -- file_entries_new->len_strings = total_strlen; -+ file_entries_new->nlibs = write32(cache_entry_count, be); -+ file_entries_new->len_strings = write32(total_strlen, be); - } - - /* Pad for alignment of cache_file_new. */ -@@ -358,9 +386,9 @@ save_cache (const char *cache_name) - /* First the library. */ - if (opt_format != 2 && entry->hwcap == 0) - { -- file_entries->libs[idx_old].flags = entry->flags; -+ file_entries->libs[idx_old].flags = write32(entry->flags, be); - /* XXX: Actually we can optimize here and remove duplicates. */ -- file_entries->libs[idx_old].key = str_offset + pad; -+ file_entries->libs[idx_old].key = write32(str_offset + pad, be); - } - if (opt_format != 0) - { -@@ -368,10 +396,10 @@ save_cache (const char *cache_name) - not doing so makes the code easier, the string table - always begins at the beginning of the the new cache - struct. */ -- file_entries_new->libs[idx_new].flags = entry->flags; -- file_entries_new->libs[idx_new].osversion = entry->osversion; -- file_entries_new->libs[idx_new].hwcap = entry->hwcap; -- file_entries_new->libs[idx_new].key = str_offset; -+ file_entries_new->libs[idx_new].flags = write32(entry->flags, be); -+ file_entries_new->libs[idx_new].osversion = write32(entry->osversion, be); -+ file_entries_new->libs[idx_new].hwcap = write64(entry->hwcap, be); -+ file_entries_new->libs[idx_new].key = write32(str_offset, be); - } - - size_t len = strlen (entry->lib) + 1; -@@ -379,9 +407,9 @@ save_cache (const char *cache_name) - str_offset += len; - /* Then the path. */ - if (opt_format != 2 && entry->hwcap == 0) -- file_entries->libs[idx_old].value = str_offset + pad; -+ file_entries->libs[idx_old].value = write32(str_offset + pad, be); - if (opt_format != 0) -- file_entries_new->libs[idx_new].value = str_offset; -+ file_entries_new->libs[idx_new].value = write32(str_offset, be); - len = strlen (entry->path) + 1; - str = mempcpy (str, entry->path, len); - str_offset += len; diff --git a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/endianess-header.patch b/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/endianess-header.patch deleted file mode 100644 index a18b2c2..0000000 --- a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/endianess-header.patch +++ /dev/null @@ -1,113 +0,0 @@ -Upstream-Status: Inappropriate [fix poky patch] - -This patch fixes build issues with a previous endian-ness_handling.patch on -distros that don't have macros referenced - -7/20/2011 -Matthew McClintock <msm(a)freescale.com> - -diff -purN ldconfig-native-2.12.1.orig/endian_extra.h ldconfig-native-2.12.1/endian_extra.h ---- ldconfig-native-2.12.1.orig/endian_extra.h 1969-12-31 18:00:00.000000000 -0600 -+++ ldconfig-native-2.12.1/endian_extra.h 2011-07-19 18:09:14.323048417 -0500 -@@ -0,0 +1,64 @@ -+/* Copyright (C) 1992, 1996, 1997, 2000, 2008 Free Software Foundation, Inc. -+ This file is part of the GNU C Library. -+ -+ The GNU C Library is free software; you can redistribute it and/or -+ modify it under the terms of the GNU Lesser General Public -+ License as published by the Free Software Foundation; either -+ version 2.1 of the License, or (at your option) any later version. -+ -+ The GNU C Library is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ Lesser General Public License for more details. -+ -+ You should have received a copy of the GNU Lesser General Public -+ License along with the GNU C Library; if not, write to the Free -+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA -+ 02111-1307 USA. */ -+ -+#include <endian.h> -+ -+#ifndef _ENDIAN_EXTRA_H -+#define _ENDIAN_EXTRA_H 1 -+ -+/* Don't redefine these macros if they already exist */ -+#ifndef htobe16 -+#ifdef __USE_BSD -+/* Conversion interfaces. */ -+# include <byteswap.h> -+ -+# if __BYTE_ORDER == __LITTLE_ENDIAN -+# define htobe16(x) __bswap_16 (x) -+# define htole16(x) (x) -+# define be16toh(x) __bswap_16 (x) -+# define le16toh(x) (x) -+ -+# define htobe32(x) __bswap_32 (x) -+# define htole32(x) (x) -+# define be32toh(x) __bswap_32 (x) -+# define le32toh(x) (x) -+ -+# define htobe64(x) __bswap_64 (x) -+# define htole64(x) (x) -+# define be64toh(x) __bswap_64 (x) -+# define le64toh(x) (x) -+# else -+# define htobe16(x) (x) -+# define htole16(x) __bswap_16 (x) -+# define be16toh(x) (x) -+# define le16toh(x) __bswap_16 (x) -+ -+# define htobe32(x) (x) -+# define htole32(x) __bswap_32 (x) -+# define be32toh(x) (x) -+# define le32toh(x) __bswap_32 (x) -+ -+# define htobe64(x) (x) -+# define htole64(x) __bswap_64 (x) -+# define be64toh(x) (x) -+# define le64toh(x) __bswap_64 (x) -+# endif -+#endif -+#endif -+ -+#endif /* endian_extra.h */ -diff -purN ldconfig-native-2.12.1.orig/cache.c ldconfig-native-2.12.1/cache.c ---- ldconfig-native-2.12.1.orig/cache.c 2011-07-19 18:21:28.347041301 -0500 -+++ ldconfig-native-2.12.1/cache.c 2011-07-19 18:22:54.118048064 -0500 -@@ -39,6 +39,8 @@ - # define N_(msgid) msgid - #define _(msg) msg - -+#include "endian_extra.h" -+ - extern int be; - - static uint16_t write16(uint16_t x, int be) -diff -purN ldconfig-native-2.12.1.orig/readelflib.c ldconfig-native-2.12.1/readelflib.c ---- ldconfig-native-2.12.1.orig/readelflib.c 2011-07-19 18:21:28.346041593 -0500 -+++ ldconfig-native-2.12.1/readelflib.c 2011-07-19 18:23:05.324059875 -0500 -@@ -25,6 +25,9 @@ - - /* check_ptr checks that a pointer is in the mmaped file and doesn't - point outside it. */ -+ -+#include "endian_extra.h" -+ - #undef check_ptr - #define check_ptr(ptr) \ - do \ -diff -purN ldconfig-native-2.12.1.orig/readlib.c ldconfig-native-2.12.1/readlib.c ---- ldconfig-native-2.12.1.orig/readlib.c 2011-07-19 18:21:28.346041593 -0500 -+++ ldconfig-native-2.12.1/readlib.c 2011-07-19 18:23:23.877046210 -0500 -@@ -40,6 +40,8 @@ - - #include "ldconfig.h" - -+#include "endian_extra.h" -+ - #define _(msg) msg - - #define Elf32_CLASS ELFCLASS32 diff --git a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/flag_fix.patch b/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/flag_fix.patch deleted file mode 100644 index 4e9aab9..0000000 --- a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/flag_fix.patch +++ /dev/null @@ -1,24 +0,0 @@ -Upstream-Status: Inappropriate [embedded specific] - -The native version of ldconfig was using native definition of LD_SO (i.e. -ld-linux-x86-64.so.2 ) which is not correct for doing the cross ldconfig. -This was causing libc.so on the target marked as ELF lib rather than -FLAG_ELF_LIBC6 in the ld.so.cache. - -Nitin A Kamble <nitin.a.kamble(a)intel.com> 2011/04/4 - -Index: ldconfig-native-2.12.1/readlib.c -=================================================================== ---- ldconfig-native-2.12.1.orig/readlib.c -+++ ldconfig-native-2.12.1/readlib.c -@@ -51,6 +51,10 @@ struct known_names - int flag; - }; - -+/* don't use host's definition of LD_SO */ -+#undef LD_SO -+#define LD_SO "ld.so.1" -+ - static struct known_names interpreters[] = - { - { "/lib/" LD_SO, FLAG_ELF_LIBC6 }, diff --git a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig-default-to-all-multilib-dirs.patch b/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig-default-to-all-multilib-dirs.patch deleted file mode 100644 index 5ed4f6f..0000000 --- a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig-default-to-all-multilib-dirs.patch +++ /dev/null @@ -1,37 +0,0 @@ -Upstream-Status: Inappropriate [embedded specific] - -make ldconfig default to both /lib+/usr/lib, /lib32+/usr/lib32 and -/lib64+/usr/lib64 on bi-ABI architectures. - ---- - ldconfig.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff -urpN a/ldconfig.c b/ldconfig.c ---- a/ldconfig.c -+++ b/ldconfig.c -@@ -52,7 +52,11 @@ - - #define SYSCONFDIR "/etc" - #define LIBDIR "/usr/lib" -+#define LIBDIR32 "/usr/lib32" -+#define LIBDIR64 "/usr/lib64" - #define SLIBDIR "/lib" -+#define SLIBDIR32 "/lib32" -+#define SLIBDIR64 "/lib64" - # define N_(msgid) msgid - #define _(msg) msg - -@@ -1373,6 +1377,12 @@ main (int argc, char **argv) - add_system_dir (SLIBDIR); - if (strcmp (SLIBDIR, LIBDIR)) - add_system_dir (LIBDIR); -+ add_system_dir (SLIBDIR32); -+ if (strcmp (SLIBDIR32, LIBDIR32)) -+ add_system_dir (LIBDIR32); -+ add_system_dir (SLIBDIR64); -+ if (strcmp (SLIBDIR64, LIBDIR64)) -+ add_system_dir (LIBDIR64); - } - - const char *aux_cache_file = _PATH_LDCONFIG_AUX_CACHE; diff --git a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig-native-2.12.1.tar.bz2 b/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig-native-2.12.1.tar.bz2 deleted file mode 100644 index dc1e79888e9bf28226cf18513ebd4478ec90175f..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 21491 zcmV()K;OSYT4*^jL0KkKSzNplS^$e*|NsB+0D*h||NsC0|NsC0|Nj6$0t5gA00962 z004jx00>}o9{1DbKmvVzDYv|Oo@Idd)&QPl`WXNy6zLn^T+aJFJ@xJHcJ(j5^}OEz z8{PFaqTAjmX}$Aq(Durg+s;0^QlCt=)lQn~!262meCXQ+o>U5bXs3@iDt%-d-(Pv~ zKH2X0ci!{X_ulRAWG!S;gi;&5LVd*9)33dyT}f1d6e)Im&wI)?we`!~-S01U_15Z| z*{;rZvtFJO<IZVZ4c)eOS6$CXU<cEy*{_G*<Z!PZ`+DuCmt&VKYwl$^t%^(A9p2sQ znR&kZ$9o@l7V6h^w_Wb<eYZY#+?lQ@pmomK%b`x(aXRa=mpGlTuDyZjSAE*=c5r+t z+P$8uJ9};1_Vvv1L(|i)*KGH9Ofy?Hw$c|px4gtL5GH^?35W>Mq|u6cnUOOpeu*}d z%}Rc$>66lfAZYb81_3FcLI_O+CL(PDqx4hsru9eYBzlMHPt_h!+DE7W7>0lV2{ef! zOp_A|dNN6<{HgeYPe^)Al)(eh1JnVdKzdCEngO6fk`W1lWK+{dO-G=ZihB`H$xVpV z@uVivsp&L&BSwG#03t|&WHca5fJw4wCQ^RXdYWpU(KSC&<caD(RKjgfYMKCghol;L zK@uV+flLEYrh!jNc~g3A6pvB)4JIk&1NA0=c}J)K004dH>->MK`=bcS=f9vIRwbb_ zMw%EY4A4NyLEaa=4n8~J4}kb<IOEWz2Tc4x^OSdMEZZ0J-wWZ4Rp$k1S@G3S;%^uX z;zp6HBtghfOqE9z92Xr(4g(*^LMfz#Q&7+dtPBPs5V948BLHepAP1lEdXK2cew$63 z{8w_9Lc+hk)PIovTypfsCWHEahni-cz|_{XU>h8cS=XOF=sO>h&LBG`l_~{6D8=YY zw`3F)Mhrn>kx?n3n4%gt%)f1$F__tidOwTN=>1z9blk{-B7%m5C<rK;D5Yr_sflI; zf)R#^h=!^_kL>?uCx-YKe{MRC?Q+ooOj3mcQj}E%4HVHuRWU^oOw?5rG$}<T1rWp% z4J}bZQZ$WFOq2xzP}4v$G!RuuQwE&I3MeFqsu-zou!M;q>x_#mT$apEim!g^`#(<y z67s{Q)iOYnEmbiz(^S<{RRq*PL@Pl70+A39Ddzs!`aJ)h=ds7DqW%moJ%)b-CJ2Tn z^3R)0HTbYT?w&k7{L}mCQPQP#&P@a3_FvPb6T(xj&Y3N2chvLll<S1M3cJHpF6wd@ zgmicgZXE?_0O&@XadyaWbXngg1WdK9y|7cHDixZ6K?2AWfq@c06oq?sc248&W{2*} zp6yxcpw+2*y@mO2DY=7`Lw~*2atx`q=0?HxIP0ZzGT^;)n5McWT*&)Qc{JZ2`rg5# z!3Cn=ZgHRDy7cSe{Q2LUZf8g=${~W%&ldfN4Pg&!!?0YXl`EFaNpjX{mgGC(ap8e& zl<N$7<`*7i=3tDM4jHPv+}}?Oq|}dMAz|tZPAn-znFQ_bFuneqf6^Ys_@nNB=MN2i zkqHbls{lW?i_4r69K`Yl7DSb>ML-A;-PggxP(mIO?bi7J9vknneZDyjdZ{RZtWBqH zZu+Gu0+yZ4!`z0cDk@r2vNC&PDnm0OQ&EjO#$Nt86uq)J2}=_<Ut*q^2SKr2_+mv1 zZ9E#Nj96n;Shm#_WI<-BqM(CTH563?6h#FBqNF=NAHwyIjrQ8_M-9xKuis7@B~Z4v zhYtj4(~MffP{Om0a<->*DGnt{0}fiphNl%en73woOd2%p;G!KNIQ4r$KUJ9z<<ok* zN#mwr9*pjRBVtp7@{VvPnhcDP$#n*&QIaN9v;{FB(p6rZ4b(i66-5C;(83lFIs}3W z7wEm@pPS{sUDIbBYwV-r_2a>KbzNcUuO3>f^xEfF0eUI#atfv`6kBcR_Gf>RmpR?u z+K?70q|MyJS}CoD>0{uih>9v|6^07Bg=Z|(sPL*@VU_{`o4J>s!MeJbWR|L9$9oQ( zX|=sH$5>l&>dx9@oa0*V=PqGRHe-SbhRV!Lr#VM--6{y0(K{iJ9Ar1Hi=8rwH*qf< zC^$l4{wfOJn@fmDP0<<Ya`nOcfoy*wIziSDbDt(7Uik6*)6^%4Oj9*A&nPXBclBaA zBy<C#{`^N9tl17z1@H3TGA0>aFZ^WEBMC}7#{@Jc7Eedr_+ch6!C5&FHC}F94bH}3 zrXTGY!vk?D<)MOQGSdjFD{eG085mV$u2H8-LX4)Q#%Q*RShcHzDq!|;!LraOS|hnw zu2tNtjHFc_HMy80IMib8)n*e?<Sf*|Fd3yR8$@E!D$_9=Qp%ZS$9Cvo!mKMT%*bk4 zQ!<Hj5dwl#R}{FnFd7zXu5Dr<hEXY&;w(p8!)6`L?kONbL5w7rb$s9T>i>5SZdyFv z*ynlk3)_<YUU%|#Bkn>9&syJS){g~#8zv!`Vi;)idOB|7^s7{)5Z|W?SJLZF`#Q&O zICl0Qw{4<Fi{{Mn#MZH-AetW-%7Tt?21~5I;rDYw2j+#zM`@Y!bf?;T;r4QG`0&l_ zcg~W=*21SpB`{gmy0>YA5f)z_LZYaQk4>nwNU23d1jSUD?75u7+z+NUWA9Z#)_zXE zk7VLFgML}GZ4@1ovTQ!GN>Q#gO#8Xqll9hRpFqE<6#+fSzz`5WQuxgkQ28?mU|N`B zppk-#Xd-AL2!f(YXenBn0hJN~loEsWVT4r-Oau{0M3hiaP+U$(($G+fMS_G89{XS3 zKRWfBFYj;f?ME$Cyt{h5H!*p+onCcbvR3AolTMzt?5|BU+0m;xfdnH>0YpPcLsL;q zEh5z|0YeZZO%%k`)RdGog$YAQP_ZpEQb{QlP|-0FKvfG6P^?8UK_L<pkwp~~5g}DE z5i=Y~l0?xFBoO+!;H#)b>GWyP8$uXCLNvq#9!VI<bAdgO2l;AHK8O%Mo<~qbsuT;v zJaTHN)&y8JGL)3DRS^`a6;f4+j*|hZIE6-HfMIC}%q@gq#uHN1Bc}`pq780jz+f1r zAWcN#Qk4)TG!;=f0h1+0Sfx2-5d@I66F|$Dm^3+xVGa^w1r)Gm1Azrq6a@@XQv}pW zOw`p8QB4yC08kXsNkIfzf`yS1treh+C5@<xqg1LM8F85rAj~wh1i@5MNR)|`9}mf( zO^IR~Wy-=sF~VgGz(_Dhr{H>#<cF$bF?X}BKj0!p0RvI@B#U>eLxXgmoR=|n)28ED zR{87IXTzcnT+4mVuif}bJci_t(F4_fQ~gKR>-}c_d+$saXCLd<TVG6S2^vB4;qSbE zO7!mFUQmqrBZ)sK_(*?;DM)Q(1gvX6Pbo}<qYk{gvFkl-FBXu}2_y7+`F5Z($M}%# zAGArc5d!A@pO1^~9_z8+OI+P>fVpq3r7F!#Wnt^>1e;R=QW$~y0f&wqD&Z=E0M%7h zRrq}bgHT^YixU%{>(Rpl5_lEa@6cZf##q;x@{kfj>Z9EFN;A9gAh!CCf0XII*L0Eu zEr<HyxaveT`#J6VaKs;z%Ggr`-w5yV73<95d6xoT5$l8@9eV?n@nU^dobcb?Aa`A0 zL_`*Vn;}dU;t}4%Bz+Jcd0(F~l&&iXTpr30zz2|BPVKJ1BD2N`>fzBHxqN|*z{rA8 z&H7kKdTjKT6(6=aEyGLG9hRNu7ZC>glfdlsIaYqz9up!}pk!d8lNdiWF%M<!ogC1s z9QqR@hg{Q#1}U7VFuX{Vo<2pUht)U+pJ$-Ooz2I0Jy~AGdg|Hrou9YPS=}CKdN>rc zhWk*?#vFb2>^UKn+m_fA9~8S8!NC?Fmak=%;ecw#?);wnp?4UWL$U{25YWbVMZ+7+ zJ^xJ%$31NfK)@}B9k3clu=K_Uz!7$E=M)m7Nbs4Qx2%pW<{j<XGPd=}0qOq-xzAp` zbAiKvfS%?Y0y|`HGBe&r(9z0!oO=W;vUnK)T|PVO$E=3kITv>LJ(5lBCwSFKuwEVp zoK$r<`K_TMRuGttaFz&dLPTXu`8SCaSIvKK5%K;Ta)&LS&TCRgcH#vS6qxIj7(E1) zAp1SydSLi3au4FES`i494<rfvG8%!EKnW+aT{rNfI0uS~TG;NeyNLRE*P5F7&E5xZ zZ|jmq5$Dw==yM};o=-rOE*4Lb++3kFgPqh=UL=7rxM|P0-f#MHTP|IGLqNitw5lM~ zOGdP4PIH~CJc8}Hl!q+jk}!rpKv|$J4V;4wt!#uOnG#+CL&f%w%1%UwG1B-?eZaxo zWnzBp@OQc4L>!@amtsA%`rDZ~Gk_P1J!|XsJA}SQc2D!OsAFt}p}0m<P$!Ym@9<`R z7f9*7y?nk+ViL;C!xE-D^`UQa1tKB~S$~tqA|DQ(B0f?Ak^oUMKCpCO%kO)NwuCL| z{FP*qMIzQzP*9~Rgi#X~u&L{T$N__;J@MCh`ga4uRQct^gz+8}ugBN%vL1(PvnM;G zxCBVatgj2AO%8wG!KQh4^l0Xj44!_To3oy&s~nAJFkmRA31&DY1J6U>!dcs(P~C!L zf#FsbeiIZ*0h+#9`K8;ekl!r>SP<w(QUKtsmbea>$}J9fGl*-yr{C<(5xp&}k-(sn zN5}lh?vr`MsPtb&f97bw<A1@~mu%e1`8geFBS8IRsPj7DZ{GIeY3VJ{^!bi3<TfTc z$o>8z#LMn#9Q)5`?JLi}d{p^wk3S*RJI`cxQrf3b^O!ilOyk2ayfg<Dw+XYuiP(I* z$Mv2m$K`ztTi{fLB#*PRn|An2c3579j2n1&-vh^IdE`tSrrt<&(1$SG8`GwHWIa{x zlQ|C1Oe9P^`N7qwHQ_AUZEbsX?L)(sX|`+<$7-_Vx)m1hJ1fT?5KptE^<>+}SBJR@ zt-?yqBF&n2#S!FTp$Nc=O|-sF2k_a_F_8_V8%&P0DeK9{r>9o&u3LfRa7rBUjnlEh zZG=fh9>FA;x)|nSK_nd^)Ng8H5;5djZG<ymfnL#!OeK_MMXf?nZ<vRMC^oMd5#l(u zc#DLWb8Q{+JE=QfTtsLv|I)IFhA2^4$IjOKKs~-6!?4HDNUIJn#MS!Z8$dkL0a|5C zKX8qjh8m#zt)p0LG#YT<z5|gVDN@p3LDAOn53(|ekU391Ry=WI=A84Bc^(;5Cgt42 zFmH9Fs!NLuXE2;=F?z`+IfJe_G64b?MLpkb|Ec`ac`;KVj;6mYluX76z)ryknGVNP z!QFJq0kV`ZX=)mcA31+c|Lbqxu~ols=FHoWm`eM^kOS=-NHHRrsdBsu9MsdlQM1!O zwzN}hO~_;L-n~7Yne%#}>Xb~Q%Ckssq4%PwT3^evkdhx?6$;VDg3gCNoPRJjuA1lg zszSU*1vjAe1FBMxU62jg-zkwXSFamjR@3PFYm}HzVXL6oNRkBHff55n8|g7mq-g(o zo1>LiJU&ZI(?q2}K>4muz|>C+hYWiS8!`Ko_Nhu@NCZ>SpCS%gF#fNbz{9V481tnH zh%&cbHLBLSq$q=LCC@LccbE4kOZcRW&rz=j9T^I+^Ng)DP(YI<?fip{ne=biC2)R3 zj(DoIloK7z6!N3z7=)}$A$5-hV3wL_7YWn%PRvF3dmC(VtK)_%3EUNkI;`th2b(y_ zgv@=AeF`c{0(R;k-H(2CSVGtlKwcUI8Ahl(YB!Y8JSO(vZ2SdU{cDwt>c!95GDqh8 z`INAll6KgyTNH^D&*_HZMVCcmx=&)2ssJOn4ifhc4NDrRjJI2F*KYothT~qJ1yV=R zSq;~V<euZ(*fsgEAPsv%6QvX+&f{2QfJ6JCK-Y~*88uTZlsDgQe52bU!C3`tNg5+D zRP0-JS<)ua{XIUs#4CdfC?4$I;zUlCnQaUdzpr-DAux%6&*}MpQS|z>J3UQqbtv(5 zfYVGj3-wB6<kH3?T8Uc%4N$|HvTK;=32x<N@0%BFnbX5Q?5s81ExeI<LIIiGi2XP* znhecIxXk;=QcaUPwky3JWD-wZ*R=#A@v|O|-u?Amdmn$t1EzbMujai_9RcLBBsC{Y za)Sk8MX3s+n9y5F3kD)Fh>9SnvLlUQ`a9>E*Wc~xACGu)dE@vk-rPL-GaPzq{s+=> zbcd~vQYVsl`6?{;o%$XdzOOsb_!nt}_{peZVl>s{d2-YS@2k7DPXg&vJX}~QYO7%j zBVgw$04x2(4O<*c$pwX@lkKS^l3x?gOTPNpC75zPU5-yq7Xg&%{9D)O8!@{JnwF9` z$e+Aog4H@Wu?J2OW^TqIwdwsDjN&axwdsEiVZNme0SYHykhsIP6^4<gfRBO{4_49; zW?^=m{C?D#m@ELT<alt`XqveKOykFH1HO16Hr(vvp-5NK>cYZeo`*eQQXsZx#x7uO z*%jErcmu(Vpjedz&Wc$XNKq?nclfIpQ&TV;*Q4#x?{NA|14*-<pA)wt*~$$3z`UcF zi!c&fos+11+_Lo2_nlhdRs!{GSRz6}0R$Z-a7S`CBMTKATr{1J!ybJAUL1*{$P0r) z4(UI9pfPka7DRlVB(HUECyq{J>ksI>h#-a`7;U}0UT{dJC>KOJA;OCr?j#LY*S;}; z<LWY<MMN5WC{UIMW*_GFW^&eeardEZDQ<D~TGo_wk<ghzgfETFF^0ooFdkA2xt`cD zj^}r9efApc&@^Ap+n%D+(JpfE%bjn#WtR;VN3c<_tK+F4ny5Xn_s4vab5kAnP{e*S z&_@SsIoP<GI`Ng{(cV4l!Iw&iJYnm4W5#2}>vcmA1wll#hZF3o;K-o7p}$3|V}eMS zlnP{sqFMrliAofuDWGCquyN1q6o%d#Ub#E1o~(%$*c6)dY!2a?8bcB_+rBWsj6!$x z{<@g?BH5G#&{>;j0z!djc*;Ccf0XQxi($#nS{m)L5Yy9!BI*jX=^kfjEDa<}ARM9* z5awH9W(^i&dBzSxCPAk$<({9p3!cP#Tl?I3-wwSGMJ*d2C4++kBVq{%ry>BrOx67o z_vq*Bmo(|C+u~5oBPvb^;yzToT=En)+~}xCj>>p(o_gg#DR?;$#EC%&o1LKHE~c_7 zcL`tG9$?SBCgq|vfm}p@Yd|p6zoUiY)BAUasGpx>^zP0OnM5R+ChXE8#}VlvHSsU= zMB?$!tnXzfN3?Bncs4fk)ALET3>-%-zgO?`XzaXk)pe*tEf*`}6`6TL(PlFe*K&W$ zRr=xF-I+%ZC!we^r1A(A<ySTX*<*b3vUFh8!ppn)J6MkylQ{amoNeemw;G40A6;?P zXmpoGeD&{T(pu5W8jTbWNn(=EeZQb~q>;4b+a`?@80<zuyLts8bg*L<61WsXByE=K zqI~LxA_N#Yon7^w)YNe+e{OouM`@XGo;~z*nMK1^&()L=H=+@4>Q;dYu#^C3WXw`l z+1S*K(E@W7bQHW879?%o>c0-JuSKg1_&8VMHxe7EG@~*%2&Iz%k91o>sAo@0<D&|$ zuR-(E7R+uoMocC@IN#G_XeiU*QKC%mKNR;P0I;&gkak!BWU_Wrh)gCq#yomcS=rms z4d7H8S-j2M9D9&%mQ1+v2Zim>d!l}jcv~Jhc21j6ZemdhB-4356CPse^fd6sG-xM@ zJw$a;(T04Ro*s_)eexV29A<==L}EQs8l!Z#w{q-PQy0QR?d92=?x<F5j4fN2gU8j1 z>|<{vie6yL-j1*~<=go#Sf*le5q4RNMq$O`=7AikmB_+$ButTpoV?Ybd#}*p?#pHR z=Nai#b!!|$u*JabId`?kv2S=6GTHW<#4QB|prREbXtl?u;TKx&x*7#VzF#Hqyl)td z0|peIKOUidw~1rFQg_|<5;#J@tD{iD0;2A|LIya{OEi#`fVGu9e!REueZJ@PVv6*0 z3%QwiT+sRhgSN#@ntCGP_2rlcc7Y9+3p22DRvsHG<;(#c;fq4d2UCbu223%$iXQ;1 z9&jzj!N7GQ$WG86okh85->fhn7!o%jjX@)`&*>l=T+!c7%fo2n!uP{Ymbif9P8NuW zkn%dI%To?$gos2hdj`uU4606kiK<sYEL9AIo{FnQD7#C~Y1LkTB{;yTkud3Ly`qN1 zH(1=kK>#~zfQ6@P3(y7Uml`+s*Q%*YT6r+^W41#pY?Sh;f^$<OhzFir>6{q}tJ@S* zn<HaZQB_sF=0mJm86zh&(tvJe?Ac#?lZ~n9)F$uKru=oDB*tbG^8V`*ifbbdKNz4| zemYb>tH)G9T7Z$?OvWe9-V9#d-gd*rF}5FQs%}TmN2eO%FhLvNF@<4x{WHN&mw%<l zjF^e+raLQ<(xWfuGEI3Jq7v3@hXzf8D~~v}J2~$>m$>5j<3=Vt)W<vWCzMS{obV1X zVPOdd;d4vp!)i6(eWG4^Fm_%xuww!ZZPN#f4XiE3@n;yfa5j+7nDDSixKxqNrXHUA z05?$#Kn{`<mo~JK!ULn6a2ypp_cr!Q)k?5ilQRSbZIGrt8YUc%pX_31efM_Vc_#c; z?q(f(qIPME9*SP<YNR{c^3Bl5v*x=SPzB>cL`f9Wc_8Is_W!f`qff83|F5UzU0<ql z&))6`Z>j9{V~6cXr|g0UNT3!=Mxh}XZRY$rO+*~{q<wdb1G^RgAVL5kUD^=%I`^*@ z?+F_#IEI&6=D~tOJ((d7W5N-LWL12g(eC$Cy1rW&K{BakK`>;35HM$EA(ANC9|Obn zzDXg`=x5*Xvfkl`i$50V6?d!c`Tdfg!?xYMEB|R^SuEhm!Pc@iDhWsdsK>U+l7fWg zVvP(H4J<;%ep~sVHD+dIm@v^@e{3Jd{z5;LjS8k>ieI5<wDy<zE}-=g3=#wp_lXbs zh01milj!cVMfMNUhCxdpNV5tT_D_f5$_LF^nF&nEwCp;?i&8sJjX^a9ML`f`P&x4@ zXLa~94t?1@f|Nlo#4)4vGl1|dR14Ga{y)R`eb)E?x7qOYWqBE^-vu?-UVHZA&zCNI zm#PB}N(X5kFni#`-%1X&T^b~N<^AOWLlhw@6s#~ZzWkpl8%j`62V9ASDqk*SAJmXN zHWCbwx{<;eAUKrKJpQd|P{<U>nN%yrM<fsUtT_q^Kz8OJP_%u70DdiC4HQ@4RUkT_ zaX<lbMFY|JakT>xKtc&12h@NbB{4;-c9=FlN|P&;7rKm>@AY~7u=swD&9_=2ZS~pn z#>?zf9#)6iCFJ%`752h2t2W-gtD<eepYS{{x9DCg)6b`QjBmnnWkfT*{Y$L)Rk;00 zA|%c~3{@|i2g}*&?_}MozjXN9;i=$*tP>ofKEd_*VyU0E?H<nD!b0bR46VN*aFBiP zz3IRE+`6qTt~w8*Z+AITa(A)gsSmnDieP~r$JddTc+~z9JtaXJc+SWOTLIBHDBSV! z#eT7y#C(lK&nI-)O1JGob3<+Y7E;M{9S^P|t3yFmtV!Z;gW*|WAHwkm-x~fpyYIEl zEJLEvXAjQk`r6Apw`xDPc-tzeVd1I^b8708bVada6&c620g!fTzNk~<qhEb#F3p!u z<9BKn?rZc6ew%(@?9Jq`^nL%Hp2CpkJD45;Jp#r|8JO7)KPI;y9%(jcmK5SE2}HUR z8-7OfLNme>$mGZd?*VTlO^rMKz0i(sIq>a{Z&zePIWfn!o8jAXrTsSNUdU`N_;z8~ zKI9lDB87%AbO?o8$o?+Q$iQs3J@w(2R4tcL)+_n-TKF!GaCrKww&`3D>!U~}Q&=oe zu?vsSNmX`cH@XzL+bd(P6JVC7xepiNz4NTSCrBPi4fz42kn<wN7V5G)XvfL;u&Uq5 ztn6SbRu-?K=ED|+v8_6*F{(P=s3Bm~S9&}0Inilpel^hs+VJLbt#jI-p=Ep#^C9Q6 z5psZQsOIKv7LHfL(PO+tex9#2mdsySi}tAvFu5vUuiw4l1+iIMuIP#GToO}^9?bUX z*sa55Ukw(9=|gjvXN&|Ps#%k-gG+L{tVM3N7ROPMV{lY<ZiW#?U(e9^r14dZ4e7sn zTBm{RN{qj6WnKDAp2aC#!ynPFTn#SVF27IEm9e8<)7zW{y71AnL?kSWK?lmzHPV{Q z#DiO|R%EiAD~>G;Fz@4`Oi!J?nXjaQ?<j-_pikqRWC!eo5I@5K`pJ0{a>b!sBX~<} z2Sv(Kku4h1WFY?ivrz2>K@!Y^sRJU6jqWO%gNT8M1NVeMAq36nS^@kZ242qjI=ud( zr{&jv^Yxc;8?vvIlw+LZYD7JdM}MEArA3*zx7_X3(EVZ(mwzbMJ$346)+=@QU3F#> z6B1D-Z5dyU4+K_m#u&HD!u&&MZ>^Y&e$UbVHUd85x%Oc3TOrVXkF9z2mMK(q$1Bfs zA9AusrS{vNu7hHTnAJhNVciU#XCxx*s(LqT9-R?LB&jM_I68&?Zg~gJdJ}#)LH&LD zcoty^FpLd^0uVB`z66V5KeMAP?6?0Q2Ep}2-eu+!Ut3C1c4c5^XJ!{a-blTn8GHq# ziZKaH@8?f>Mo}OJZ)=h}&mOB^O!`-U3M|Mn8tNP>p8u+synUH3zat>V0FneGfJCKa zUye6l8<$Hr9C34O+o(=1Q(34S8)pXyhJ(~N<+YPP3f2ijr#khI-?#le{vEbOy{RYW zEeSFK4TN*oqkTRmSm7{}2M@!V@T8!EUE@}ZwD~Q@!yODT7lD99EE%A6>S`fXG%lMq zVMX(toJ827*1()wUVJfS6K!zCtKo3g<c>o}D%;Tw8V;d)lg6S42x+OqU&&2Tt2JOS zKhQ^=#BpT7vYZY0Zn$AFGI=vCzK&Z$yJ(Qu*5i<%V5_h`LTxu_MhyZ(-;ca@c~_Di zXMVpgXiLnj4NxqVlbokB=tY071c;wR;}4+xXXW=7kZeTl_&F(LJCEL*quJu$!@=Y3 zT?TfNq3X=B3>qq8C0U5+^x!hsI8dBNgyH4*I30GrQfoy~TaF}{6<~5*n)-_%rZ#nu z&6Lz6bjhK*_ZY+GBvsx(xDk`;3=nW8EIUPO!|E1%q-*V<4e1SUaRx+cZyQs;PA)TX z^OqyX(Ga&l7I2bINI>UvsH+~qks~`{Do=rI(=YXYUHzJ>&LvMcd4m;K9`1-RgW8JV zuUFgl?PmUuyaFGFitO#Uy7hX>hwMwgzBg=dW9~sx>%DxC(<^*Dj_LPAVJ$>h`geOA zB)7xIGmo-<Pp`H&tm|~-Cxl-wI*5#5+{^JLc>+*=Dq@vs6!8KOv(-VgDVN&6v5P9+ zwBmkU^6pA8=TuYFvlEYw_*P@$-l#YJA9NX8A6z0zc59y9A@_BuWUquge>bPZNCY>f zDDN!MDA$Rr5aGiX^lZku{CcczGInUjA}U1I(AJSLA{dWR2lf>Dxb?(pV_)UPMZL|m zXB_H`<3z1_8$ld%HnTh$#-R8?w#@i6tbKcgVYm$S46vAPso3uKzJF5Y)-qrlk8#^{ zL1rgb7@0KF3x{{KRRiK2v?@Hr^P*eypP=*n_PywoN)n7}ZN?@wEl8jJg_SX~GR9WK zM(fOlim`KZ8fC>oqPUnDM#RcxF|?ym8*>J^o0TxO7PDq?IL;ijXAA_+VqMEyPBeFs z;2vsZPLT>49f2e%iaw)r)#~Z)L8FuIZii8m&-dPR4vIrUE-Bm(Eg&OHWT?fAa|hxz z;-B0M61yOuQ7GJEn8L*xeuXRm*ho*F^4XR|ejVC;-;Yl}$DVNor1}2;*ZaS+-*vyf zSf2Qg{o*;gXh;$YRU9RQHWMLz6V>aGwbE_t12nL<l@8JutCyX1%cgjUznw=DA5b?L z6u{COrgHDqj#c!ZMsDXfV>Ri~qgZ-zsA%IVqJ}9-Lj;J|8h)RuEcjrIaLh{v`>&A$ zrW(u$q3B*38vGdANMc64gc$VN38PYX5*n)LN|AeQ>cSv)^9e_Pi!OL}_j=u*!lI-` z0q%XN+h4y2Bw|`=p``m%Sf1gQ8IacNv}dK{G&XJ-J`aIli-&<eMv8M0xiyG^2N{Qc zC|`E$zUY&1z8ulHqz<_wX(dz|fSEhEr5y@uckG#t&t7-yykGG~B~Acz$CJlsCmNQf zV995!M3ZG&t;UwRVTQ&~8AAv_D+vtnBvlM-f4}2tW@6p{q=NXM4VAH7b`a%#l#50% zmFBbHU}gtL>_a8S&j?^VP{g?4@TC!;?(ZA&{SE=MS&p1L447%R*h{?D`=!N=ySdOz z!w<{tdeqoyE`y^aH%JUbzWW3tFU-vh*Rz=PsKO4qW)a6gS=Kr!$~jEqj^Z#Egew=o z<APyDasjWw%fJJ8Al|#k)uXqc>DlN*Q3Hph+N`IXt=p@YO}KGP4-e<*CV{=$A@oF< z^?|Iizs3RJAq=wH#yZ0eQ<F(_5GP{;$oDXH<C^1LHpRVD^cZEuOzL_ZhWjHirHA14 z{^Od~d5v^tH$S4q;$@$5V}uPbbnZST2~;G?90;I92nSEutML8(V(;UB8$Y)O%v|&% zT8^vcKymbYh8}MlZXRIXpJe06FK+ZdVl>gFRuc;Ze`nnv*3z}0?gNGvDhT;5rX%f9 z9`J<%HtUAEH@&bJe%J?uD#h)05ozoUqC>pa9&@fDl|LIqw^SGX$0ZYo4`sipaIH#- zlLmO!8U73({!MD+xTB0Tz3QlFs|HtVTIA58B5-0g)G=86+f*pDAp|z~Qyio&n4T6& z42B7*oLgmGeC85M3%%_Xp7Sy(Pnm<$jr}o9VcpU3Xg{vh7zhj{p~bV|2pHdnzv_<c zLm%CPzu1dyVfc8U<3`tZK(*{(n@dwBIq!sF6+RJtw#QpA*ApZ-sG^WV!E?qCLwVbi z+7>IRdy}jY6Hg%yC!#wyAte?4kq2YtDQ$-6P2$n~n~m`=BtY=C1jrEt59h6m{&#M_ z-^b5bSK;kbZsXS8nxK@E7LV2O!NMiVh%}oB`4-BP-p>WCbtCA%pIFnop&b;bL&G(u zIr4L5D7HBHv_=nx@rLY;{$D?yT2_;xAo<pi+B1vea}jbIQ6H-bhXWl=q7fa^<snwZ z$=ZQA1O+7bEtu5z^2Kvc{(Kqr@A!%7sgAMJibat9)a3)uRjXC!<o&xRH5^W8*4^OW zwPac5*f=;h5yuoAR@Nm1A!Z#g5kTv`g|KZM*I|XPR4naSS#L|}ymCzJ7HkeG?J(1z zP-l}+hAL368+FpLu-RP~4N<;~u6XFL46UR(`!KpzQUV|&)gZ$w5T2_rl3dUmR;d@P zqXYv$HBh32{k53Tx4zgy?mbqogCPLJ35Uy-&PInsv&gt+bM~By0~6rMAlkR-p#B9c zr|kUSqv-_xW@rKmgw%q+us^Pds)|4Ahasj5pcUFsoIuhr%Fr8$QCSfr%#}e+F#$vn zF|j};px8tB8!?pSb4?8}VhAOog|Q25VuH4a*p#)3z(y*9f{F?VrGTV~6Ly-!WG1Gh z0}z_Z$e<u9NNFV^Y9dtJhxp{)S~rj9fWl5>9N~^wF9a_-icsTx4dQ`1k9fOP1Il_) zs3077;Wq?8?%9x(A&~%2H&<JX!8HTb^dB;O>H7#cgHVU&{YpZgb>Kg@{NGrMJ;D27 zgP?yb5Iuka^(y}TLsMU=9mn$n#Y{0$E+L@^FbKmycf8HopOH%kV>^`97;z{}tAmrl z*msGz17Wc~WQZT82i4QK6r^HE9<MGOiQw~4;Qf(8V2{9g0n%)va0dQNLn(;}ff$Fy z*a5@4kTfBPKocD<?+yWlVs%3r3QV=H1Np+FkWL`?7B}}vbUDP|3E&Vx5=AHaP=~<h zrAkl=kCBuu%7_zq^LUnHkYH?4y8HqOL`B%I#}q8+ZeWzQ2aF_nlbU#Ls@5iHdi&>$ zBM6o$)Ly!SetFUaFz&Owz*|I+*7<R1>v3_gaQ{PGoq*-{*({t$N(9S~C<^tEHw4?* zH&0-VS@JLtP;~~$#B4~+j-gASUuQwq%jF9Y;W$s-jzmRd;B4;jg#jSRqOV&?VKKyp z3eYHBJca|@J}`0(bKnzj(7yB;3ZK(7sg~!eisdvQX*#NzMcncSiIM%@9FW1zfoUp` zxfC)GGKsJr2=>^r%Lriw0G-N2I(s%SfZ5qy2NoXRU;45-ksmULhCtA_J47VFJqYYO zfrvRb9D}>MZp-1=ft^FvCvz7-;;cu_N(XR1sRvU4)$2~kNDCOZAe;{Es*;LWYwWAS zU?pdGyy7X>6<$CAVD3j@JzDP`G#3dUQgee_>;chGvph<$H-}8Y-iO-|8^jp_3EE?t zPUppa{0Vd}X6S>^J46mBsmcx=W4g+9hwrri3iJ?18B)~K(LmUBt<W?uu=%-~2bM#G zPX}{}0?(|zWz#P#Z;jy{1BP6Z&rmR2tH30C$0=4Ab%&Z8X!S-Ts}#|DQCt*5!ZHJy z6*0v^kT4DbSm=~}km(ibUAx{vV4df_A%}6L&4J83%ID)ZnN6`_yF+D9VbXF)4;=z( zhNC_zY*6TAPD8wo#UJe`fuT=S$sU|@j6wtA#O@+s^)DC~kv+$&Ky2=!jD$aZI0%8j z@&n7ZfUSa*%he8K5U2uhA(v#>9YOK4sLd2h164dq9D|~BI}l)am$|)(!q!vTWWljv z#ZIN5@;7wqn~a7Y%nnA*z{2MBC=)ez?`{mD!D8n<2YeG?xMxDzG~iDqx)A0=ka1JA zz=6QwxF1=)_IPjNfsmcj8<OB2LrORW$QYc#if}U_vcDT1x5zzZkcsxZ;bG}LITd<E zN#-4t=hY5Zsk8@Xi|oS-VDl~~MLG>DiHJB{z!~9g{RPp$?8qHdvYW4&o=D__lJjqj zjD`lGN^$@XWKitb+=}=<ro7<9Jz)e#268odq+O792YR01&@!gvFnE#>+pykT2_BI& z68geUbp198eVxB-0w_m;2scyk08vUrG&hBn(IRn9^MULj<XE851_Ty|6Zf9PJ3Hc@ zVAThS8&k{A&9x|adQJ*%C(H0ZTmJ#~{tACSEA7GWzrg(0fio;(VhMLj|9|*Nl_|A| z>H2A`gY<+WY4n9FM5qCjlL9)K<Py*8-0kfL;DYHP6;Jj=+VyCcy$rQURe+3pgUBV^ zNIH7W&Y2+1smKlO+!+7OnzNKwmf;cik3dNT5dEy(eo@Ex{}1IakLoA+Ru<A#-6i*n zExT-O6aDPuJM|)ElG_v4ne@6?(j15T|5*Hf@7)aP)J6zCojuc^-+}Th)11fZgOgo7 zUJ*3y)1oQo*nWY(NIIXdKC?@x9H4?=s)(6gd^z?0bGc8pd_O<vH@7N_gkQD%;q!di zKSLkRWcZMUnwWR&KcXOXfJl~Zy8`aANCX&zlDXWFEWD4i1M`q@FmfkDf+drqz2)J) zqf}Y4{=iEOi#L>dIdS86F0S~4sD7V8HhG)mgpiLTw7a*8QM@_^r4(dbZkNxG*?>|Q z9vrVjk<W3G<QRt8p`v17SJIppwnj-OkKIrEtxbMc=}*zn{?z)9RQ$o~_~eq;A#&k@ zesaYrNYJGL$$oxtY8#9TE0dwkvZ<n_GOCfOs}%|<ZpEava=^(7QcQ>RIziaZDT;~M zHUZc_L0~@bmKhu2GHza2=hqLi1w`*VO1u(pG7g9Ilt7e0ARmhTy2r7NTE`Ot3av+f zFyTb5?Q-j7fRGyrIX%bRHGFgq!@KUCB^bUiQ%F!WRO<|n6c_=c`yEg^WCOwIA+eSr zA-Usz2LiaY4WT1CE~E$?gwQr%9TTYi*65T_5PAL0FG>eub|+h_!m!MF*0V!QJSSl* zZN&@1nCx{281BWCSl)Fn1Vx*fxT!f(meFw~WJHymVC9z6T)C43Mo?CB3NZ~{b0oQ8 zJfeAJJTE0$wGL=8B&eXE)Jco@k=Zo^e4?R2lr>yBx#AnnH(VhjBFQ7x7?|M3=1moD z&f*4v8dy~*7UmroJx%IkqiAmy@d`QUlJ=1~trHURT2h`8l&&6S)DfiVusHHjj6}7h z35L@En|3wXS6tqNgoLDbhhNLYeX*|3vaGi#s02i|0wjotyv$c9rHCLisXgJ$sR6Qa zmCf!;IPucWRn;Ttzfc}%<EYe%P?sWarG2&vLzG0K4NmNTvjD(C4_6;@$cAo^HW#{} z_M3^Zu*E}Jat#Gj--@9i2)6l-mFb2#lW2U9?Tx`hVOcz+`o6p9am>EwS7>yfA9?eP z_SVv0mMR9Yv{(EFyH3>@kO6^S@?@>WPk20%_?(o&_;@h5fWf`gkm>|)lQ^Gw@Z&h3 z9_i+5j92ip8POf;CKx$b0}qfMCOgj<W2ap^Devn5))jLwz~W;?rPR4m3yXw(5evq{ z2`p2y-$x}Zy8t;QNF9itFpEL>WywsOB~cCilJwL}(eRkBKIC(>HwUUxh%3;`@vwMA z-uDKYM1+bYGt52$Ou^}2Lv`?>@Vy9ZF%Ty!A*!JOla9#25jYV$duaG41vo_^A?Lzm za#%pSR5Y~EHq9b!ubJXz1}^}h|CfCjK_oFJL=3s_M&}Pv5Yz}PK*{n&s)3X}$rsOt zK3QIU5#Tq0D;JeOvFb{f1=y?XozXd-uDplEfNq+=dI8l714`1jY2%U@?F#8r%^}sn z4N7h(WQz9!eKHuPnLBzmjHd516Ek4Y<xoWV044<K1oJ>dD7&gUcEs5>RNZBiLe$-q za^N)+m>Qf<tM>Hws&+~0?UATS`*E8@`XgRCSV<#gQAHHB0HP<^1@dnM?)MU{7&43X zcXgCQ)SkEDBjnBWsA^fXKrb%zj07~|4p2y>J}s-1&m-nRvqJ;r?mlV@KkG>{dt3VU zM`#9VIf9v_0vyI@d-Zz3Fg2hGQ<I_B33BPE7SR<UfE3DY+21FOCx=E2n1iB*2(w)p z$IKIo$m|F}UVu_RUs?&Fcs_8XP?21JXjK3`lzhy>j4=StM*<iq_Sskg6gspn{(NOT z%TOu&Aw%e+7Ya6#C=h^oQB4>e5+5knyq_tgV|9YcWS;`4Uf)fjZXQ;G_1$nhV4Nvu z0f?d~u>9)T2d|o%>L{bg*OpNgMyT5ptds$es^(N!m^j;p{QH~St7k14y=Ge0MpQhX zRP{#Ay%MGcfiyKoJEt1JW)OtQnzpI<2n+&FAi9M<JU4`p3ZSE*<oSNuQ_o7(2?&)P z6rmyYvx@haFgD!!2=&s#6EI66vhwNekBEwJB!&+x4J<-L6jBaA<WLPMKxdm5XiZ$v zKxFW4B%yW8>BKB}pSL`h_fH}O-U{p~N+y=Fo%0DHdO4>d<dmgwq7hnwA~>6vabfI8 z^F&V+Bu%+S0p~Yf_@fstp-lmNx^%6#k<YQC&UR@*_(eLMBk{P2@*~HybNXjTRGcjf zAVvg%5-@X4H4zaqL1ZRWCqlsi5O%eI+*Fnt;?dLHF=MG12b^44hO$O`>F+zg9VHYK z=r<2OR5qSozlV?zMJ3P`9I`;E!_FPwCRp?Ify<UKkF~T`&-!(_H~g%%wMq%X{q`xF z$R5zVO*1bhLSjW^pB`QtVj;b8GgwQB@}_9DHJAx$x=yg>NMKyrSSSVvK&MH=3>^Q6 zhVy1Ha+#f+4vrY}a*T<Www-Efbz+-F14^nBX=+Z%)y}!W>=iNUFLKkjT+@+GtqRI+ z=8tXxoIe!`$fKQRCt<TleQ-#2fsze6w)<@5w%TwoDq3EU+0OM1EU?OSFasx`2PA-Y z*g)5E4^fc<DsP4N(*cTMB6gxDWWh{sTWE1k0nIV8bsglBNl@+C==1v1{h~V(kWDl) zK>QFmY&q;5_DxiP9wG(i)yUlOo??1ARvu<*s;pf*PL&#}qLQsS2XPjlk2(&peE~fU z8Sq_?#}{wEHal|XHN`lA-JDD8@Y3B$G|C{kVfCT-5UdC5F9BevgpnbP#>Qmeq*FtA zx58)>3Nlx50uYQ-CCFk-jzN$*<ekN+i6aR<3QM_deDTK^cklChzLSB_f;jn{aj6d% z&M4|ha$Fq;fSp4IK%v^JpC3NnB@N*R0S%P$9|>+vM_f5JU}O=PdbxbX8o|?vM8B^8 z-%?<tz_o?S*N2kyyCo@+Ecl^qXvlTiwRr~ReY1=(ZX-!w$6)KGqYyiqX@xv_xk`nM zn|kn*+Xft)-JP<aCw#aqL3_cahi#Dsrb|v(k!WagDfC-0Ff!8s#Y~d}moFQ*>0Zg= z?)UNV?j2s)L=gm5OcKUUn`psB^VNadmtp6_3DT`fXtYb)%-chi@W^7Ss;Z)>(gB2p zVk2aVO>&^PQk78PiyN#Ez|()f<Z}0&XLv;FHVa}(Te49OUtVrEe%Z?=V^&8A%S}kz zH;bk;i$x|hk^UqJ&4%M{FOFASgNt;=;^&70hGV6Wmaq4)bk9r};lm28!=eqcR>Vs) zaF}jfc1W}~_Uj^64dFSYPB!gTb=c~K16(^X!*|$Wx*FQL=JL!?yFM65%tZEeMF;}Z zX_)P2chzdpj;BHlY0c72Y?-iwY|Zb*h7m)*S?1(sO@uzUM2M`CN+@lRPBiN##om>o zRlIF2Y{CI75w`Q$Dsb)$`@_c(r%%EuNP)NL+_Xa`d=AW7vb(byW-RMRLO9QEmBuqN zXTxMzD+a=>CmZflqLNXD61<T}K5Dr>4v7^M`sYcl7smcIjbYb(!Aes*XT{*xCi&=- z#gui!?o2~LE!rDtc_?>>jur|IP}KDr!?4QTg^KBPDDw4}Eh!KTEdgOMH%eou9grA{ zfh$I(+ey}4(h(`dwPVA?4EmVHLiySd;sZ-D+zJ#Qk{rG)9yCoN7DWheQ#NWq!zS%` zqZM~x))$3RIU$9@!X$m1jjO@bPE&~{d#uIT!omdB$CHFFI6VZzxZ-2eo7mQ>PFsc7 z4(KlKJ86`zV$;dpTsO1T;aEH<Ac|ZaBs;ymz~pEeYr%!D14J3{Y=UgI<GO|b!mSbn zL=uF^Qj4=60C@q~()0z!f`b5uBydS67>5Z1Di~#vh%wy5XsQV2is{mJhd<F8jD*1$ z=TeFh&)o(_5ep5BX+xC$Yvghdo$v6;PMeb;6Y{4UU*&X5f<1)SQTKZ@p`97vr;c1; z^j?r{Fr|BMkI%ksYRs<a+QF)sfZmzfK{$>`IGq+!Fxx;h>=_X4n9A3^^_#dRp2eeE z8|J-sn;42z03QV|q}d#o{QGZEG$0^$){+wVEgGrt9HjzT(Kqu_Hd(q%{v+ZTJ;5XN z{0q9RL-iX0>N+RU{CdI#6s9Zlxmg7yO-UaK>EIye?SqZcJo36tnB83`*rqQD#=(0% zSQ%9#NKg?98M~qDJ97i7Qa7`OA6Y1Q{EkE~U&q(rc;pjdkIQOx;3L_F$I-v)Kshj+ z7swnwuv5Fd?|RyS2DB(iZ3mOe^i*IMUSK6M7iEPt2oy3f111}AyNN#^YtE=q60kW0 z8%>ZI7!2!@CH{{_!w_jnE~Xe&5Edgtwq_{AMJjN>L@&Xk4bBo(8PM4md8rdng2E@r zfE`b_yz&{bv;m^=h6{A1!1r<o<=#d&oYIYindBh|Dm+&H&^z;gQ9DhLva%jHRC)H~ z3x{OF+FthHaq(0ycqa7>!;op?l+hIB;?SKRUxbkQr^NW~(K8ISw54LXl*^7+D~>Wk zK!hwmmj;(DwBumjs6C^}Kf1}=-_nX92#}ANH+WD(zZSX@Psr)Mt>@3iv4?!>&`+Mv zA2mG877%#Sy&>X=!^-uW(|4^vq|!1qY><?IZ%m&khXB;v!)JU`WS?TN^4<`EBd^bP z5)uc`u<Z8(l}r$PCQ(=4@|N2N>X#^^^<r)v3VlaLxD(3f1R7L62?8WZ<mECG836Tz z(j~N@dg379FnkDyz@#euVF2Sr2@BHHW&OaGD7Ze)f9m*f`n}{|xARILZBG1ffIAlw z3=qJaVG0oIB>>4t%uPT<kqk&Wfm|doBw3shu$K+7_k&0rFZiPCVJg{D6i6v)WJT5# z`Ir_(gjQI>i~=b+X;8M+g}wi5>USV2We!wx!5wJ9fgs^A1BMJ=SaMiLP$zRdj-a53 zLMJ6U^w}nV4gZyO=K|DX9MMik2kF=wkO>k)!bqNe?X>Y&qF~dJ5l&de1lD3C7D1e| z0al~=E=(7g87J!HsoP7uaLR_}IayeZN;9&tL-muaC5r=4tp1a$nh7bHl~}5^SOp5b zs?3qC)CP=0tq>p+%AMbtkTtk|t2QTgQJc)eBaN{7H(Fsw_R$@QGn*4lE@G}O2N6<O zoerfifj7h+EH{YXcEjbG3MLxxEGkudlh%fP%tI5f8s4L@()r=nN*Ejx9x(D=mO1Bs z*2OMnBE=9zjl$y~eg+<2842T^=E?bgaQG5KAvw_XZ@QF0GL5O1?Mwv^6%O?2Lb6O* z0D;L`2i2?r6-Fp~B2=R`6H`cg>?#O51CuByf?*3dU{IylE0k!%&~^?Zk6q{xbq&Bd zSDxFGMD;V#IGIm<y&5a}aqrj@hzs#z5@+f2HT8P7wq4g~y<i7E!lGG<A%KZU35jZn zI?a=c<e};hU)Sj&AWOI0PGp_@t3wM2IAhtLhSd}q7ilOWh^90Jk)<)`?KB`9p-QeG zHdPD^2<WKcbODG)>Gm512q}ZG!M~}(DRGeD6Xrf6bRBX(SMmj6sft+zk$#d40#c<4 zz*!q*N+2*w)+-RvQImi~GniH)#5n~eDAF{<20)Y{NhqLi%=(&?U|7_%$kY)ALU~9! zX!IY}?v@jBQNY5PV_0?4lwfiP1SHIw4ak9l38G0LVQ|xiT+KORr?&$%YJstk(G@}* zz-77;d~R)->~YUtR2;Mq=i!TmL#|m_n%I4tR=H*o<})MD9==%whs!(5Q9pp;3{FH4 zkH~@e`+M(d0G^@@l@F>>go;3vfs#Q@0>F5}Y-TEbdNmdKL@*d3iY#0~ZA%3Bgf#T) z?}lTaj`{+TJ=w&?H2eyku~<Ry@zY?BToc>tk`KvhtSm*~agZV$a8m6pw{UMi5-YDE zgR2&rz}`<0zLJJw>chD^6q|O7;6N=U6smP9ebbtHs%m4^nU)m)B2g64X<clJtW;dI zQl>d5ny89tB1niWSV>7vOtGd|nI%+IiVEW>R-&kc1i>;uLPT1?$eM<zii$OwHI!<| zjo->*Qa=2z&k3bAPhrf3QE1Yh&Sxa_3J_lzBH5@!kWh)Td;7w*Tt7;EfcmhX%tUBd zND(Mu5|ao417(piUzuGW03M)l3_Hvetk#byb7Cj54G!_6@p?8#pnE7eVk26FBtk(3 z6ucf!US@GSy4ahb10YC=-~L-Z6U&E$KIvF|;{Efz%8LLX0RmSrT$*8`RUDTn^Bf13 zk3OGNsM2&CE#lqo4H|4cKh}n7lb&8SdS=bbxa0{j2?>JOkTMPA_ebFNzRwM2dAkG; zno1NYLy_ViG4hdnBP==17qsExb=7rAP(bz3>&zvHPRV{a93Y4`2y%CZk<W!8L?cBQ zCE}~B`Rt1#ErY*PL)XnTGjbL13zjlHr-B9tU~o$wC0L}8DS~AshDibfl98w=ib@7j zB82;|x@S}A-~fBs5c{6%5_{dEkqAH%voNqlO8IjdkVpuqh@wI7PnX>R(-SQ0Ph<JM z4CgmyJ7x*)Phy<DjAX%V?|~roq|j3uL)`p2I3pD?A~;1X5iqJs$qSf<gR*t006Ce) z=s$>VP&t~U5wLG6c{4Z@g)L&@<o64ro`lo5d}^k-RY&0=Vk(KRudw=y_ovhz^Rcus z$|qXyAO}$psUaiqYQ6DMk(kkl=48T5W>GC+nM1G?lr13NEwVlTi+XKw%MOlBaqpjW z@AgOC&f0A#fUDk5aecmGy-`BR#qxf9D<_a`df8C)3s##N)CN&eNN0!6d#$OD0VSTd zbaw;aBaEe{h?yw_rqsl8LM3)F!O{jU0~x>KAEc7?pq~U4Ar))L8_r45<KS4ZCLo;f zOh?2mBOt|`rN0yM)AkCRCqN)`hwA?~|37#9d4CW8e~<9}|HpaCPlzPl%|P<NUn>Yf z2u|f7=Z+Vw!QmkZAdRzpICYboWi+U33aJ)NrH0%vixH4H5<ogd6Jzw7y*KU3*Tm^k zXNScQzmaAA(+)M4a!?|guPxwd$(UtVElQV`e(D;jd;G`9Ts2l0G;ilfd@<XK|0twE z>n^UJD&Ok)qq^wh(3P+|%8)`{%yda0qA?7>)@bwz2uEh4AG)1)A?h5a*4K>MK$in) zS&M(Co8QBbhKz>gdea36zPK-wBGZ~|(qu$LeIJLp;o}qyZM(Q0gaODMpo6dAfDtt# zN6qqQ5Y3S0pad2Vz&Rsd4NBnC<)r+S;#?%!!?m_dkg0_qlLG-tlT&ypi1}WCJJJSE zzk!3{^kADHAAW6B$pG+xW+&qO+xofJo_mXZqwp1cue!vew|;Cj;-v=(-g;Hoq{^S_ z?KX;F5H1~Aj)NpTV-v?_ixgK_xq&|5;3}Jxx!Rgp<ZV3FL^h_G?Sq+Wk_2)1H^B7> zXXei=xk6^8Y$-JGw<>~lNy(u}W-HKlN8ki?@|%Vi+If5|vZ&titNh7P7)11r{{8eA zUFMLeOF2y;Eux7Sj1Io#J@Ld&{}KX*fQdk*2#Q|#B0_|NF;amMp<-GWQ@1xp1cT9) zRGy+KMDv`z;)FQ7BdBkTOp=sg@cO$r7yNSq9a&}uJxF^4tjIb;nR0n}34nYcI&|rK zft<9lJ)k64co8I170ePPukEnPT43r%lXiDe#EpXN+%HCqEknxDBd9S*14Q>p-c73E zOcztaicQd`F)rE<O=by=G8SE?PP_x>p!@U3Y0_Z*;WuW8cdB}JUL338k-0%;CQWlS z(mRMg4F?TL$R&l?$Wl9|2E?VzpcX+Wg(6LGV>qC4!*Ba2?tpy<w`Xc9kLXZYYvyKF zK0c2@hmvvm#<|Ld1hTctUb7boy;MDBgvic35<teiThV%Q5bn=MRIC<y1n<R^lw$Z7 zvx}7hJ7zN(FvTpK!?!X(;;!}2P!TdR<TZDDW+$9xr&Th2o9*}6p|xl^xi?}ze+p$j zlOcU=wwm`t%#Cl*-D{#19%3%0d8m|_qmXCqH5oh`;ojg>FI0^vp`$0A+`ZF?uHMYY z!qC*GPGuG1Vh$~lP9`%3)Jja`u;RKih1ij1CkeM3Z+)g~Rl&@!Y_-HWO2WMy)N<q& zN5NB{b<DA$t57OjFJ>QbTI~X`W?BX~h|5|S+elx5nJ$B7AjL8<K>Nih1G1Y4*DTx( z4+F8Vt2DDo6%thSdzdg#+7gd;5u)HZO;rlVH3+1W;ZwE*tN`@<xFhtSe8Vu>V|yKH z8lt9(_jAq#A;dF>kP+%12p1S&hLs6PK<@%TI}<_Ww0)+hzvbODhG&f*;El9mk`REh zAefla1#t56p*dS-!;<koWEjFkr0&pl5<5J~Wm5DZY0{)Kj#L|)fE&P4Mk^wGqIO6G zkRIe>W@_*KcEo-i?*lwa3doS;3Swtip{o#6LSqAJ3nmDP5IO<{pv_>J3qs&UYPE?m zs}L$8MwD?foCjc__3wx}MI;D5A`BhW`RI{AZX|#Z$URX?K--rz{8i@%O?hq|umSTw zf55{WUoIG=xfGO@kYCG*`u4!K#wGqc({Tp&Z;V2CU(p+cA<-O3x9R21r28_)9@Y@3 zvbWLWNO6%3n=mX1GqM_vU^V-Hq@m~DYicHukyex=^`15%tOl@lAY_kXs~ANEj{<l2 z9>NX;Bq1aop#xBN@BltT>=k$WS9ggc7j<aBIz;(9u8+aV-Z$Aer(47<yX=YRd`Ki= zW?~4Ft`w<{GI9;H&@w>LK%RvpG8#dM`%<|JBy=i|BcFym_`@QKB+_gE{yI0kp(2?k zK=glRs%8oXW5YMYs;YGa-lCXyVy5@4f?{xc{!;WZ72Q7D7l~1#0Dd$lF&+r9&SqP3 zwUDssB=nLVkZFC%uE>OfmP!?`>k9*5dk?ai--~&OV(OuB)M7QMNK{-#+@sNb|KTKZ zF*JONMioRNQ#*+V*jy6Fze>BvgWNnGlgaG#;jb<X5zBz`RTV`N6AtcwXJxmykTPw; z?x_N{{1oZw_5UP3(oo}sqlujUiqh<XPGFIP<I;PT_>dt>L=r}VfwCzO#U~&i5Og8j zmk-Auh5G(m#PK#ikx%j|dbm0s_@}g<Y3_^FLIwcxpAd_;6*~RT(ANb%&&peU0jzre zMYa=?`Xl<t@jE>oMi~?Bz;An{^2ziNbR`iFx}`$Imf1@5Qe2X?3r-2}{ZE%YFT?R? zH}+%R?smNTv=}bY-@W2^@(9DuKQ`L>Fl+OW(k$RnCXuAyH)(ycJy~?ae1=yC-4u|z zYb4grla@GQ658bYt}I}^YU-8^OS6<pv2uX(50_BwkHzwuI+8tK52HNl(tt2L!SL*R zeLIg`_P)Lu1Fh83t%laYXj|6kRK%wyoZ%WK(z9p|20OPmR5s2<%@b|cuF{Q(l<W8@ z(MUY|6ZEfkKr;M>>Qjj4X{NUxn^q)&A%dP+Q;6`OPs6t}MXUqNB62$+uxNd&l*pZ& z%=Xn>JkG(ynER{JJX^?u2q1k^zhW5&!3WmJpfj_TMQ!}4K(=zlo}Tl&rAUY}E1gJ; z4QsOt=bB<M2QK2tStSw(<=<Q=PH9IleV`i%90!C=Wvq!3`*{lk7C@}Y@fd1I&_N~| z)1)QVj5G^V5@-;H%5(YINT7|63|I<bXz6faxDk?j=~aM;q0>;*n3E}CK?^M;7zn!| zY;Bcdq+}5~Y7=Yf_Z#&ccRUxlm>DC%$0b3<aK=|%%PNZjkOmV6yF%@Qx-}@?W>)8s zg#Z{%43OwfNC&(LVgqjQeTq1wK!gP`4g)fF==119lYu7p5eQSev<wJgD3~yTc`Xt$ z3yFb~&Wp23Itg<eC@NH`U~Ig%4`dHa{V}L@deqnv@9&R!<a-$=lyY1eTxjDn3o2*P zLo}gHDngG*XcMS=#(ZysAtD!3xjY1WBiq|zNB5d3^(R3RAQE@bwfy+_>}*-*Fb1Df zo+SjFBZ#025&#u}>R#P#({N=}>CKVf(F3zCG{s@j2lTt~F)l*T>Pk=MxaP@FxXB<@ z)xyxaG!vJjwG{N8K)3CzLPhvei9|+~B}oKPBC3Rjr^F8Z5YP+-13)Q+1vGQ^r{qYc zrY0KX0PLzARHfn|WV1^ON<s_<Cy9iz^WH0Oo*n>?nr{zQK#LuM0+kgrMGiX_%*Ds9 zyOI_srWce%{z+VTiLkt$iFRE?XF`&rfH)M$6J#t6GeD$C6bo%+Wr0%w0PNj{;wvGR zGLQ-+1q)b!AThOwN>bEX<*>%kN`Ns`MPf)mVNzBUYYS@HR8c@kl_Z%5>HGJ$T669B zx1Ao|x_>*-cn7#m_ln*&nOIO?92<n*4LhhznISkN*?d6h2#0!?tn4;O*$y9G^&a6f zqExJL#~;wRl+h1)@HU89M3KB&N90F_#Iq1`;p^z&9S$wd(}~=HgAil3d6}}{bbDc* z<)BF$3BiwpVdVL{P)}8<<d~HKM>>u#fz0a6Kud6eupxt%W5Lbh&9zJKn1i4=Z5d4j zaS+;w$<ECmF?s1b@gxg&FtPj@fVO0f4Azvmr)*8>*Q4Xg?7@g%EMis$MuK3b8R#so zXp$^D$a|^c@cKNA-S3~d<xGm4GeIViEc8rc7Y^9mONO3=>21f|yCQfpAaZ(yiXB4o z<rSt|^0^p?siO-n&aJgEEe!x@lWu5O_Xl7dD}p+p7MlSf=k`@qWyn!EcOo2yCU|%$ z&Viy&*g+1=>Y8mzV-jOq!kOG7rd;Y3S;nLn43w*328_nZ9Tfc&dFrbAv9@W#0kyQJ z;;)TVfK>ceS9b12pG@ypY1Jd_4+U^wNCu5^md8L_4_cH`Gd=UN*qf6{kwTQ<!rn@Q zkGQew*wR|y=|Ex*^Y!nX7U?e2sGz0PIU$f+kg!J)1oYZ`)Zw%`+L*8pET*KIMle4s z7lpEyGvtS*B|RB@Lf=2krCPChGC>HR3kTMbdX64C2DD<zpHG$y>!R_3L8X(xiG_pm zsY<HE<U2*tDXy(Ww&d4R?U_^>deHX1g9NX(!u+SO$i%cl$qV3@*b}x3wOc6xJSf(R z%+4`P&O=0dZHQ%j^$p<&HpzsCmL(xFly*CaVi=Nx2^=Hm-Sk~($2+PA=FC`o;=aj# z59@~Z*|@<>vQ&pveKAs^7zI%kQ$|pB<AzyfrXs15U=(>*vLc+*+>OEM#P^fC9_2AR zP}f#E!>%$9O~JcrrQ2ougxbx_KBNmlxm(3N%2#71ZR$#+3nEl#CMhv(NN6PprVAA4 zHK+=S9{e&U$e~h&w$LqXVOc>XvY?H=Y?NHKTWvlJz|zGJj@jaetc*Wi9;gyf>i{^b z#-M2Y$4z$b4{W-s{B_87BlTwh=tZUP4-;eYgQ;^vlkzRyg12XSyY$@)l`wLKt>Q=& z*z*u*cXtv(NRu|5Zxa`x$oGo1g+|hmS~6^ske#e2+{{ByKzx>;E;`RzXQ>E-qIP3A zmS{}FWY#gu;gGgBqg}#N1k4uB7r6m7lw(WboX0rbPW_bD91Rda^^OrZW+=l;gf=Dc z=s+fM^iTwd+dOVe1>7VRr132&Vh*Tk5<(JTBYwJj)_I3nB>NJ}n9~@-W+QoHD{fmO z#IqSw)>|5T>5$gk#^w;oHv8=XJyuvqqO=y}%`x6Msf=7mvDa}{&N`N+LdIk~W~L4w zYcA9<7E2Sxc&$L~YGPpJP>ZJ)!^1JPOoX77RV>FaT{|(A{h@ZiL3c$P9euH=JEx+; zF3Txm?d<E~dD;%l8MBJ%ODQasl131dL<>u#0fZ1nU_3E{iDob{Df}i}eFErT4%R(! zZ=157qM*Z?D{3*3!ZraQgi+)<*e)7rTWga-9obbw#1C~il9rR<CdG<n4$(to0l5OK z!aABOa1$VI=IR+3AW&GKzzq{{SQaJ%6fpwO&@$}hUCu>%k;}S+lA0-s8-c|)BuBT$ z-dGVFbyJzvIP4+a1EkV)n51O3dhENfn2JS(8ryKSBIJP*jyE-|jBb>nv1&I<CZ`?j zBE|S#86fX^QPrngttp8NVO(?vO%Rbt28iICgC{2}LL3NW5^y2LdQgQ#D9U~!l_G$J zNK(?HsX~D_RHaaRWf0cm4eYS_P*FG}rCgfPK*ow9hd78*bT(Wfc9#+8xb<xbaJH5} z$g)Uf7*iCXT7-&ayCiD0z_|mH{8zmL#v#3Qq)K2dL_AR6%}e~Wavg{Xj-K2f80tIE zKf$-Sc&CwqV2PxlCMuAbiV9#-R{=D9v87F<9F*@FNf2P|iXsJ9Mu9?=QK0jKCa&^3 z?|Mx#8lrLt4d+63h0dpTG?!3MAgQC6WTe$4b_vr8WNLcfDM8>D6!hf><E8#1kxZY+ zR65^k0nJM7^&+nkRNW1sa4dutS>gbk0w2o&If!}T=aL>}GIdiuCu%={qzev_djs92 zzJq7;P*n0u`n<m3c66uYlgI%6g9>o`Y4hLN+w^zxHztALM?j01OO(i$9te}e*m=Zl zJ81qSh0nZ?Pf<2UpvU%mFWzL5)F_^hTY-_odU@j}<euUrBY3VKS=;(^ApVqk4}nf8 zPPTFkibU-&(wN8^76$%{ID)U&BrD^QAH+wQ0otFIThEm9(Dr`1DyhfkE5eE@A1<KS zWO)=HU876_#B3Z>$W#)UbR51cGD0Qvv5Hc#2o8)!kTm!#h7m7WC1`1(c3<d(QBy=s z+$VOvDK?q|W#L1d6a+yORWb@`>G{2a2ee>z2b_Ds+^g?J0JHVQO%f=4Fq3Apv1mw1 zVmm<Tuja5kwoXH2LszB%(UE?VBtXAI1}-)2ZGi%gzwHO|pSv7W6;X&86=SRDE}5(_ zS4l(t5Xdr_Fh2NkhmsYD7-M%B9N#tsPQ>`o@E?d}Jy7cS$f+0r%VE%fBQC>JAFp<4 z@~5jP2e~a1e_=KY4jX$`*HwD3o@jN{hIEWH?QF(@so^YJ6Ay$ql^A9$myjJXuuVkF zl#R|Ts&FTZqekYG1gTt0w1UI+fbiaQ9G#J19gyT<Cdtd?rar$Ve#3&Y2-c#Tz&{8s z;CTj7Hcb+qiX!&zJ?RKZB=?`hwP)?Rg~Useq*PDC;ELN8peODU5l8wD={g@7^&hky zr-MAJPbcu?E;TZiC@SqL`4fgZ7Rgc!Lja&_l0_t%lVm0Y)DJr<Lu8X$hw<+J@9mg@ ezwiD%Is@_~HSRlblT`=*;_gVN3K9#Kf=fV+qBXz( diff --git a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig.patch b/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig.patch deleted file mode 100644 index 52986e6..0000000 --- a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig.patch +++ /dev/null @@ -1,471 +0,0 @@ -Upstream-Status: Inappropriate [embedded specific] - -enable standalone building of ldconfig - ---- - cache.c | 11 +- - chroot_canon.c | 7 + - dl-cache.c | 235 --------------------------------------------------------- - dl-cache.h | 3 - ldconfig.c | 27 ++++-- - readlib.c | 7 + - xstrdup.c | 11 -- - 7 files changed, 45 insertions(+), 256 deletions(-) - -Index: ldconfig-native-2.12.1/cache.c -=================================================================== ---- ldconfig-native-2.12.1.orig/cache.c -+++ ldconfig-native-2.12.1/cache.c -@@ -16,6 +16,9 @@ - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -+#define _LARGEFILE64_SOURCE -+#define _GNU_SOURCE -+ - #include <errno.h> - #include <error.h> - #include <dirent.h> -@@ -31,8 +34,10 @@ - #include <sys/stat.h> - #include <sys/types.h> - --#include <ldconfig.h> --#include <dl-cache.h> -+#include "ldconfig.h" -+#include "dl-cache.h" -+# define N_(msgid) msgid -+#define _(msg) msg - - struct cache_entry - { -Index: ldconfig-native-2.12.1/chroot_canon.c -=================================================================== ---- ldconfig-native-2.12.1.orig/chroot_canon.c -+++ ldconfig-native-2.12.1/chroot_canon.c -@@ -17,6 +17,9 @@ - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -+#define _LARGEFILE64_SOURCE -+#define _GNU_SOURCE -+ - #include <stdlib.h> - #include <string.h> - #include <unistd.h> -@@ -27,7 +30,9 @@ - #include <stddef.h> - #include <stdint.h> - --#include <ldconfig.h> -+#include "ldconfig.h" -+ -+#define __set_errno(Val) errno = (Val) - - #ifndef PATH_MAX - #define PATH_MAX 1024 -Index: ldconfig-native-2.12.1/dl-cache.c -=================================================================== ---- ldconfig-native-2.12.1.orig/dl-cache.c -+++ ldconfig-native-2.12.1/dl-cache.c -@@ -20,12 +20,12 @@ - - #include <assert.h> - #include <unistd.h> --#include <ldsodefs.h> -+//#include "ldsodefs.h" - #include <sys/mman.h> - #include <dl-cache.h> - #include <dl-procinfo.h> - --#include <stdio-common/_itoa.h> -+//#include "_itoa.h" - - #ifndef _DL_PLATFORMS_COUNT - # define _DL_PLATFORMS_COUNT 0 -@@ -39,103 +39,7 @@ static size_t cachesize; - /* 1 if cache_data + PTR points into the cache. */ - #define _dl_cache_verify_ptr(ptr) (ptr < cache_data_size) - --#define SEARCH_CACHE(cache) \ --/* We use binary search since the table is sorted in the cache file. \ -- The first matching entry in the table is returned. \ -- It is important to use the same algorithm as used while generating \ -- the cache file. */ \ --do \ -- { \ -- left = 0; \ -- right = cache->nlibs - 1; \ -- \ -- while (left <= right) \ -- { \ -- __typeof__ (cache->libs[0].key) key; \ -- \ -- middle = (left + right) / 2; \ -- \ -- key = cache->libs[middle].key; \ -- \ -- /* Make sure string table indices are not bogus before using \ -- them. */ \ -- if (! _dl_cache_verify_ptr (key)) \ -- { \ -- cmpres = 1; \ -- break; \ -- } \ -- \ -- /* Actually compare the entry with the key. */ \ -- cmpres = _dl_cache_libcmp (name, cache_data + key); \ -- if (__builtin_expect (cmpres == 0, 0)) \ -- { \ -- /* Found it. LEFT now marks the last entry for which we \ -- know the name is correct. */ \ -- left = middle; \ -- \ -- /* There might be entries with this name before the one we \ -- found. So we have to find the beginning. */ \ -- while (middle > 0) \ -- { \ -- __typeof__ (cache->libs[0].key) key; \ -- \ -- key = cache->libs[middle - 1].key; \ -- /* Make sure string table indices are not bogus before \ -- using them. */ \ -- if (! _dl_cache_verify_ptr (key) \ -- /* Actually compare the entry. */ \ -- || _dl_cache_libcmp (name, cache_data + key) != 0) \ -- break; \ -- --middle; \ -- } \ -- \ -- do \ -- { \ -- int flags; \ -- __typeof__ (cache->libs[0]) *lib = &cache->libs[middle]; \ -- \ -- /* Only perform the name test if necessary. */ \ -- if (middle > left \ -- /* We haven't seen this string so far. Test whether the \ -- index is ok and whether the name matches. Otherwise \ -- we are done. */ \ -- && (! _dl_cache_verify_ptr (lib->key) \ -- || (_dl_cache_libcmp (name, cache_data + lib->key) \ -- != 0))) \ -- break; \ -- \ -- flags = lib->flags; \ -- if (_dl_cache_check_flags (flags) \ -- && _dl_cache_verify_ptr (lib->value)) \ -- { \ -- if (best == NULL || flags == GLRO(dl_correct_cache_id)) \ -- { \ -- HWCAP_CHECK; \ -- best = cache_data + lib->value; \ -- \ -- if (flags == GLRO(dl_correct_cache_id)) \ -- /* We've found an exact match for the shared \ -- object and no general `ELF' release. Stop \ -- searching. */ \ -- break; \ -- } \ -- } \ -- } \ -- while (++middle <= right); \ -- break; \ -- } \ -- \ -- if (cmpres < 0) \ -- left = middle + 1; \ -- else \ -- right = middle - 1; \ -- } \ -- } \ --while (0) -- -- - int --internal_function - _dl_cache_libcmp (const char *p1, const char *p2) - { - while (*p1 != '\0') -@@ -172,139 +76,3 @@ _dl_cache_libcmp (const char *p1, const - } - return *p1 - *p2; - } -- -- --/* Look up NAME in ld.so.cache and return the file name stored there, -- or null if none is found. */ -- --const char * --internal_function --_dl_load_cache_lookup (const char *name) --{ -- int left, right, middle; -- int cmpres; -- const char *cache_data; -- uint32_t cache_data_size; -- const char *best; -- -- /* Print a message if the loading of libs is traced. */ -- if (__builtin_expect (GLRO_dl_debug_mask & DL_DEBUG_LIBS, 0)) -- _dl_debug_printf (" search cache=%s\n", LD_SO_CACHE); -- -- if (cache == NULL) -- { -- /* Read the contents of the file. */ -- void *file = _dl_sysdep_read_whole_file (LD_SO_CACHE, &cachesize, -- PROT_READ); -- -- /* We can handle three different cache file formats here: -- - the old libc5/glibc2.0/2.1 format -- - the old format with the new format in it -- - only the new format -- The following checks if the cache contains any of these formats. */ -- if (file != MAP_FAILED && cachesize > sizeof *cache -- && memcmp (file, CACHEMAGIC, sizeof CACHEMAGIC - 1) == 0) -- { -- size_t offset; -- /* Looks ok. */ -- cache = file; -- -- /* Check for new version. */ -- offset = ALIGN_CACHE (sizeof (struct cache_file) -- + cache->nlibs * sizeof (struct file_entry)); -- -- cache_new = (struct cache_file_new *) ((void *) cache + offset); -- if (cachesize < (offset + sizeof (struct cache_file_new)) -- || memcmp (cache_new->magic, CACHEMAGIC_VERSION_NEW, -- sizeof CACHEMAGIC_VERSION_NEW - 1) != 0) -- cache_new = (void *) -1; -- } -- else if (file != MAP_FAILED && cachesize > sizeof *cache_new -- && memcmp (file, CACHEMAGIC_VERSION_NEW, -- sizeof CACHEMAGIC_VERSION_NEW - 1) == 0) -- { -- cache_new = file; -- cache = file; -- } -- else -- { -- if (file != MAP_FAILED) -- __munmap (file, cachesize); -- cache = (void *) -1; -- } -- -- assert (cache != NULL); -- } -- -- if (cache == (void *) -1) -- /* Previously looked for the cache file and didn't find it. */ -- return NULL; -- -- best = NULL; -- -- if (cache_new != (void *) -1) -- { -- uint64_t platform; -- -- /* This is where the strings start. */ -- cache_data = (const char *) cache_new; -- -- /* Now we can compute how large the string table is. */ -- cache_data_size = (const char *) cache + cachesize - cache_data; -- -- platform = _dl_string_platform (GLRO(dl_platform)); -- if (platform != (uint64_t) -1) -- platform = 1ULL << platform; -- --#define _DL_HWCAP_TLS_MASK (1LL << 63) -- uint64_t hwcap_exclude = ~((GLRO(dl_hwcap) & GLRO(dl_hwcap_mask)) -- | _DL_HWCAP_PLATFORM | _DL_HWCAP_TLS_MASK); -- -- /* Only accept hwcap if it's for the right platform. */ --#define HWCAP_CHECK \ -- if (lib->hwcap & hwcap_exclude) \ -- continue; \ -- if (GLRO(dl_osversion) && lib->osversion > GLRO(dl_osversion)) \ -- continue; \ -- if (_DL_PLATFORMS_COUNT \ -- && (lib->hwcap & _DL_HWCAP_PLATFORM) != 0 \ -- && (lib->hwcap & _DL_HWCAP_PLATFORM) != platform) \ -- continue -- SEARCH_CACHE (cache_new); -- } -- else -- { -- /* This is where the strings start. */ -- cache_data = (const char *) &cache->libs[cache->nlibs]; -- -- /* Now we can compute how large the string table is. */ -- cache_data_size = (const char *) cache + cachesize - cache_data; -- --#undef HWCAP_CHECK --#define HWCAP_CHECK do {} while (0) -- SEARCH_CACHE (cache); -- } -- -- /* Print our result if wanted. */ -- if (__builtin_expect (GLRO_dl_debug_mask & DL_DEBUG_LIBS, 0) -- && best != NULL) -- _dl_debug_printf (" trying file=%s\n", best); -- -- return best; --} -- --#ifndef MAP_COPY --/* If the system does not support MAP_COPY we cannot leave the file open -- all the time since this would create problems when the file is replaced. -- Therefore we provide this function to close the file and open it again -- once needed. */ --void --_dl_unload_cache (void) --{ -- if (cache != NULL && cache != (struct cache_file *) -1) -- { -- __munmap (cache, cachesize); -- cache = NULL; -- } --} --#endif -Index: ldconfig-native-2.12.1/dl-cache.h -=================================================================== ---- ldconfig-native-2.12.1.orig/dl-cache.h -+++ ldconfig-native-2.12.1/dl-cache.h -@@ -101,5 +101,4 @@ struct cache_file_new - (((addr) + __alignof__ (struct cache_file_new) -1) \ - & (~(__alignof__ (struct cache_file_new) - 1))) - --extern int _dl_cache_libcmp (const char *p1, const char *p2) -- internal_function; -+extern int _dl_cache_libcmp (const char *p1, const char *p2); -Index: ldconfig-native-2.12.1/ldconfig.c -=================================================================== ---- ldconfig-native-2.12.1.orig/ldconfig.c -+++ ldconfig-native-2.12.1/ldconfig.c -@@ -16,6 +16,9 @@ - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -+#define _LARGEFILE64_SOURCE -+#define _GNU_SOURCE -+ - #define PROCINFO_CLASS static - #include <alloca.h> - #include <argp.h> -@@ -39,10 +42,20 @@ - #include <glob.h> - #include <libgen.h> - --#include <ldconfig.h> --#include <dl-cache.h> -+#include "ldconfig.h" -+#include "dl-cache.h" -+ -+#include "dl-procinfo.h" -+ -+#include "argp.h" -+ -+ -+#define SYSCONFDIR "/etc" -+#define LIBDIR "/usr/lib" -+#define SLIBDIR "/lib" -+# define N_(msgid) msgid -+#define _(msg) msg - --#include <dl-procinfo.h> - - #ifdef _DL_FIRST_PLATFORM - # define _DL_FIRST_EXTRA (_DL_FIRST_PLATFORM + _DL_PLATFORMS_COUNT) -@@ -55,7 +68,7 @@ - #endif - - /* Get libc version number. */ --#include <version.h> -+#include "version.h" - - #define PACKAGE _libc_intl_domainname - -@@ -152,8 +165,8 @@ static const struct argp_option options[ - { NULL, 0, NULL, 0, NULL, 0 } - }; - --#define PROCINFO_CLASS static --#include <dl-procinfo.c> -+//#define PROCINFO_CLASS static -+//#include <dl-procinfo.c> - - /* Short description of program. */ - static const char doc[] = N_("Configure Dynamic Linker Run Time Bindings."); -@@ -291,6 +304,7 @@ parse_opt (int key, char *arg, struct ar - return 0; - } - -+#define REPORT_BUGS_TO "mailing list : poky(a)yoctoproject.org" - /* Print bug-reporting information in the help message. */ - static char * - more_help (int key, const char *text, void *input) -@@ -315,7 +329,7 @@ For bug reporting instructions, please s - static void - print_version (FILE *stream, struct argp_state *state) - { -- fprintf (stream, "ldconfig %s%s\n", PKGVERSION, VERSION); -+ fprintf (stream, "ldconfig (Hacked Poky Version)\n"); - fprintf (stream, gettext ("\ - Copyright (C) %s Free Software Foundation, Inc.\n\ - This is free software; see the source for copying conditions. There is NO\n\ -@@ -1233,6 +1247,7 @@ set_hwcap (void) - hwcap_mask = strtoul (mask, NULL, 0); - } - -+const char _libc_intl_domainname[] = "libc"; - - int - main (int argc, char **argv) -Index: ldconfig-native-2.12.1/readlib.c -=================================================================== ---- ldconfig-native-2.12.1.orig/readlib.c -+++ ldconfig-native-2.12.1/readlib.c -@@ -22,6 +22,9 @@ - development version. Besides the simplification, it has also been - modified to read some other file formats. */ - -+#define _LARGEFILE64_SOURCE -+#define _GNU_SOURCE -+ - #include <a.out.h> - #include <elf.h> - #include <error.h> -@@ -35,7 +38,9 @@ - #include <sys/stat.h> - #include <gnu/lib-names.h> - --#include <ldconfig.h> -+#include "ldconfig.h" -+ -+#define _(msg) msg - - #define Elf32_CLASS ELFCLASS32 - #define Elf64_CLASS ELFCLASS64 -Index: ldconfig-native-2.12.1/xstrdup.c -=================================================================== ---- ldconfig-native-2.12.1.orig/xstrdup.c -+++ ldconfig-native-2.12.1/xstrdup.c -@@ -16,15 +16,10 @@ - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - --#ifdef HAVE_CONFIG_H --# include <config.h> --#endif -+#define _GNU_SOURCE -+ -+#include <string.h> - --#if defined STDC_HEADERS || defined HAVE_STRING_H || _LIBC --# include <string.h> --#else --# include <strings.h> --#endif - void *xmalloc (size_t n) __THROW; - char *xstrdup (char *string) __THROW; - diff --git a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig_aux-cache_path_fix.patch b/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig_aux-cache_path_fix.patch deleted file mode 100644 index 27bc411..0000000 --- a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native-2.12.1/ldconfig_aux-cache_path_fix.patch +++ /dev/null @@ -1,36 +0,0 @@ -Upstream-Status: Pending - -Coming from this bug: http://sourceware.org/bugzilla/show_bug.cgi?id=11149 - -Nitin A Kamble <nitin.a.kamble(a)intel.com>2011/03/29 - ---- ldconfig-native-2.12.1.orig/ldconfig.c -+++ ldconfig-native-2.12.1/ldconfig.c -@@ -1359,14 +1359,9 @@ main (int argc, char **argv) - - const char *aux_cache_file = _PATH_LDCONFIG_AUX_CACHE; - if (opt_chroot) -- { -- aux_cache_file = chroot_canon (opt_chroot, aux_cache_file); -- if (aux_cache_file == NULL) -- error (EXIT_FAILURE, errno, _("Can't open cache file %s\n"), -- _PATH_LDCONFIG_AUX_CACHE); -- } -+ aux_cache_file = chroot_canon (opt_chroot, aux_cache_file); - -- if (! opt_ignore_aux_cache) -+ if (! opt_ignore_aux_cache && aux_cache_file) - load_aux_cache (aux_cache_file); - else - init_aux_cache (); -@@ -1376,7 +1371,8 @@ main (int argc, char **argv) - if (opt_build_cache) - { - save_cache (cache_file); -- save_aux_cache (aux_cache_file); -+ if (aux_cache_file) -+ save_aux_cache (aux_cache_file); - } - - return 0; - diff --git a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native_2.12.1.bb b/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native_2.12.1.bb deleted file mode 100644 index 7c34635..0000000 --- a/meta-linaro-toolchain/recipes-core/glibc/ldconfig-native_2.12.1.bb +++ /dev/null @@ -1,32 +0,0 @@ -SUMMARY = "A standalone native ldconfig build" - -LICENSE = "GPLv2+" - -LIC_FILES_CHKSUM = "file://${S}/ldconfig.c;endline=17;md5=1d15f20937c055cb5de2329a4c054399" - -SRC_URI = "file://ldconfig-native-2.12.1.tar.bz2 \ - file://ldconfig.patch \ - file://ldconfig_aux-cache_path_fix.patch \ - file://32and64bit.patch \ - file://endian-ness_handling.patch \ - file://flag_fix.patch \ - file://endianess-header.patch \ - file://ldconfig-default-to-all-multilib-dirs.patch \ -" - -PR = "r2" - -FILESEXTRAPATHS =. "${FILE_DIRNAME}/${P}:" - -inherit native - -S = "${WORKDIR}/${PN}-${PV}" - -do_compile () { - $CC ldconfig.c -std=gnu99 chroot_canon.c xmalloc.c xstrdup.c cache.c readlib.c -I. dl-cache.c -o ldconfig -} - -do_install () { - install -d ${D}/${bindir}/ - install ldconfig ${D}/${bindir}/ -} -- 2.7.4

9 years, 5 months

[PATCH] Revert "flex: overlay old recipe"

by Denys Dmytriyenko

From: Denys Dmytriyenko <denys(a)ti.com> oe-core has finally reverted back to 2.6.0, no need to overlay it locally This reverts commit eb86f6d7a079fb9240c466978c6d3b927ba4e0fb. --- ...-target-for-building-tests-without-runnin.patch | 28 ---------- ...oid-c-comments-in-c-code-fails-with-gcc-6.patch | 64 ---------------------- .../flex/flex/CVE-2016-6354.patch | 59 -------------------- .../flex/flex/disable-tests.patch | 19 ------- .../flex/flex/do_not_create_pdf_doc.patch | 17 ------ .../recipes-overlayed/flex/flex/run-ptest | 5 -- .../recipes-overlayed/flex/flex_2.6.0.bb | 62 --------------------- 7 files changed, 254 deletions(-) delete mode 100644 meta-linaro-integration/recipes-overlayed/flex/flex/0001-tests-add-a-target-for-building-tests-without-runnin.patch delete mode 100644 meta-linaro-integration/recipes-overlayed/flex/flex/0002-avoid-c-comments-in-c-code-fails-with-gcc-6.patch delete mode 100644 meta-linaro-integration/recipes-overlayed/flex/flex/CVE-2016-6354.patch delete mode 100644 meta-linaro-integration/recipes-overlayed/flex/flex/disable-tests.patch delete mode 100644 meta-linaro-integration/recipes-overlayed/flex/flex/do_not_create_pdf_doc.patch delete mode 100755 meta-linaro-integration/recipes-overlayed/flex/flex/run-ptest delete mode 100644 meta-linaro-integration/recipes-overlayed/flex/flex_2.6.0.bb diff --git a/meta-linaro-integration/recipes-overlayed/flex/flex/0001-tests-add-a-target-for-building-tests-without-runnin.patch b/meta-linaro-integration/recipes-overlayed/flex/flex/0001-tests-add-a-target-for-building-tests-without-runnin.patch deleted file mode 100644 index 556c240..0000000 --- a/meta-linaro-integration/recipes-overlayed/flex/flex/0001-tests-add-a-target-for-building-tests-without-runnin.patch +++ /dev/null @@ -1,28 +0,0 @@ -From b4aa18d939fc0c8825fa584dfcee1a7da61099cf Mon Sep 17 00:00:00 2001 -From: Alexander Kanavin <alex.kanavin(a)gmail.com> -Date: Thu, 10 Dec 2015 16:09:26 +0200 -Subject: [PATCH] tests: add a target for building tests without running them - -Upstream-Status: Inappropriate [oe specific] -Signed-off-by: Alexander Kanavin <alex.kanavin(a)gmail.com> ---- - tests/Makefile.am | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/tests/Makefile.am b/tests/Makefile.am -index 4ac3c17..0025cfe 100644 ---- a/tests/Makefile.am -+++ b/tests/Makefile.am -@@ -21,6 +21,9 @@ - - TESTS = $(check_PROGRAMS) options.cn - -+# This allows building tests without running them -+buildtests: $(TESTS) -+ - # The script testwrapper.sh will run most tests as is. A couple tests - # in the suite end in .reject, .table and the like so that we can pass - # different arguments to the test runner. We list those extensions so --- -2.6.2 - diff --git a/meta-linaro-integration/recipes-overlayed/flex/flex/0002-avoid-c-comments-in-c-code-fails-with-gcc-6.patch b/meta-linaro-integration/recipes-overlayed/flex/flex/0002-avoid-c-comments-in-c-code-fails-with-gcc-6.patch deleted file mode 100644 index 438ca5f..0000000 --- a/meta-linaro-integration/recipes-overlayed/flex/flex/0002-avoid-c-comments-in-c-code-fails-with-gcc-6.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 7072befe1397af4eb01c3ff7edf99f0cd5076089 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Andreas=20M=C3=BCller?= <schnitzeltony(a)googlemail.com> -Date: Tue, 30 Aug 2016 14:25:32 +0200 -Subject: [PATCH] avoid c++ comments in c-code - fails with gcc-6 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -fixes: - -| error: C++ style comments are not allowed in ISO C90 -| num_to_alloc = 1; // After all that talk, this was set to 1 anyways... - -Upstream-Status: Pending - -Signed-off-by: Andreas Müller <schnitzeltony(a)googlemail.com> ---- - src/flex.skl | 2 +- - src/scan.c | 2 +- - src/skel.c | 2 +- - 3 files changed, 3 insertions(+), 3 deletions(-) - -diff --git a/src/flex.skl b/src/flex.skl -index 73a0b9e..ed71627 100644 ---- a/src/flex.skl -+++ b/src/flex.skl -@@ -2350,7 +2350,7 @@ void yyFlexLexer::yyensure_buffer_stack(void) - * scanner will even need a stack. We use 2 instead of 1 to avoid an - * immediate realloc on the next call. - */ -- num_to_alloc = 1; // After all that talk, this was set to 1 anyways... -+ num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ - YY_G(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc - (num_to_alloc * sizeof(struct yy_buffer_state*) - M4_YY_CALL_LAST_ARG); -diff --git a/src/scan.c b/src/scan.c -index b55df2d..f1dce75 100644 ---- a/src/scan.c -+++ b/src/scan.c -@@ -4672,7 +4672,7 @@ static void yyensure_buffer_stack (void) - * scanner will even need a stack. We use 2 instead of 1 to avoid an - * immediate realloc on the next call. - */ -- num_to_alloc = 1; // After all that talk, this was set to 1 anyways... -+ num_to_alloc = 1; /* After all that talk, this was set to 1 anyways...*/ - (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc - (num_to_alloc * sizeof(struct yy_buffer_state*) - ); -diff --git a/src/skel.c b/src/skel.c -index ef657d3..26cc889 100644 ---- a/src/skel.c -+++ b/src/skel.c -@@ -2561,7 +2561,7 @@ const char *skel[] = { - " * scanner will even need a stack. We use 2 instead of 1 to avoid an", - " * immediate realloc on the next call.", - " */", -- " num_to_alloc = 1; // After all that talk, this was set to 1 anyways...", -+ " num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */", - " YY_G(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc", - " (num_to_alloc * sizeof(struct yy_buffer_state*)", - " M4_YY_CALL_LAST_ARG);", --- -2.5.5 - diff --git a/meta-linaro-integration/recipes-overlayed/flex/flex/CVE-2016-6354.patch b/meta-linaro-integration/recipes-overlayed/flex/flex/CVE-2016-6354.patch deleted file mode 100644 index 216ac7a..0000000 --- a/meta-linaro-integration/recipes-overlayed/flex/flex/CVE-2016-6354.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 3939eccdff598f47e5b37b05d58bf1b44d3796e7 Mon Sep 17 00:00:00 2001 -From: Jussi Kukkonen <jussi.kukkonen(a)intel.com> -Date: Fri, 7 Oct 2016 14:15:38 +0300 -Subject: [PATCH] Prevent buffer overflow in yy_get_next_buffer - -This is upstream commit a5cbe929ac3255d371e698f62dc256afe7006466 -with some additional backporting to make binutils build again. - -Upstream-Status: Backport -CVE: CVE-2016-6354 -Signed-off-by: Jussi Kukkonen <jussi.kukkonen(a)intel.com> ---- - src/flex.skl | 2 +- - src/scan.c | 2 +- - src/skel.c | 2 +- - 3 files changed, 3 insertions(+), 3 deletions(-) - -diff --git a/src/flex.skl b/src/flex.skl -index ed71627..814d562 100644 ---- a/src/flex.skl -+++ b/src/flex.skl -@@ -1718,7 +1718,7 @@ int yyFlexLexer::yy_get_next_buffer() - - else - { -- yy_size_t num_to_read = -+ int num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) -diff --git a/src/scan.c b/src/scan.c -index f1dce75..1949872 100644 ---- a/src/scan.c -+++ b/src/scan.c -@@ -4181,7 +4181,7 @@ static int yy_get_next_buffer (void) - - else - { -- yy_size_t num_to_read = -+ int num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) -diff --git a/src/skel.c b/src/skel.c -index 26cc889..0344d18 100644 ---- a/src/skel.c -+++ b/src/skel.c -@@ -1929,7 +1929,7 @@ const char *skel[] = { - "", - " else", - " {", -- " yy_size_t num_to_read =", -+ " int num_to_read =", - " YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;", - "", - " while ( num_to_read <= 0 )", --- -2.1.4 - diff --git a/meta-linaro-integration/recipes-overlayed/flex/flex/disable-tests.patch b/meta-linaro-integration/recipes-overlayed/flex/flex/disable-tests.patch deleted file mode 100644 index 4dc801d..0000000 --- a/meta-linaro-integration/recipes-overlayed/flex/flex/disable-tests.patch +++ /dev/null @@ -1,19 +0,0 @@ -Due to automake stupidity the Makefile in tests/ has an 'all' target that -depends on $(BUILD_SOURCES), which means when building flex parts of the test -suite are built even if they're not needed, resulting in flex needing -flex-native and bison-native to build. - -This patch removes the tests directory from SUBDIRS and will be conditionally -applied by the recipe. - -Upstream-Status: Inappropriate -Signed-off-by: Ross Burton <ross.burton(a)intel.com> - -diff --git a/Makefile.am b/Makefile.am -index 076ccad..0574d7b 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -55,3 +55,2 @@ SUBDIRS = \ - po \ -- tests \ - tools diff --git a/meta-linaro-integration/recipes-overlayed/flex/flex/do_not_create_pdf_doc.patch b/meta-linaro-integration/recipes-overlayed/flex/flex/do_not_create_pdf_doc.patch deleted file mode 100644 index 032833a..0000000 --- a/meta-linaro-integration/recipes-overlayed/flex/flex/do_not_create_pdf_doc.patch +++ /dev/null @@ -1,17 +0,0 @@ -Upstream-Status: Inappropriate (embedded specific) - -Signed-off-by: Laurentiu Palcu <laurentiu.palcu(a)intel.com> - -Index: flex-2.5.37/doc/Makefile.am -=================================================================== ---- flex-2.5.37.orig/doc/Makefile.am 2012-07-21 04:18:27.000000000 +0300 -+++ flex-2.5.37/doc/Makefile.am 2013-07-30 17:57:09.834834531 +0300 -@@ -2,7 +2,7 @@ - - info_TEXINFOS = flex.texi - dist_man_MANS = flex.1 --dist_doc_DATA= flex.pdf -+EXTRA_DIST= flex.pdf - - CLEANFILES = \ - flex.hks \ diff --git a/meta-linaro-integration/recipes-overlayed/flex/flex/run-ptest b/meta-linaro-integration/recipes-overlayed/flex/flex/run-ptest deleted file mode 100755 index 19db337..0000000 --- a/meta-linaro-integration/recipes-overlayed/flex/flex/run-ptest +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/sh - -# make would want to rebuild some files with a compiler otherwise :-/ -make FLEX=/usr/bin/flex -t check-TESTS || true -make FLEX=/usr/bin/flex check-TESTS diff --git a/meta-linaro-integration/recipes-overlayed/flex/flex_2.6.0.bb b/meta-linaro-integration/recipes-overlayed/flex/flex_2.6.0.bb deleted file mode 100644 index ab35b09..0000000 --- a/meta-linaro-integration/recipes-overlayed/flex/flex_2.6.0.bb +++ /dev/null @@ -1,62 +0,0 @@ -SUMMARY = "Flex (The Fast Lexical Analyzer)" -DESCRIPTION = "Flex is a fast lexical analyser generator. Flex is a tool for generating programs that recognize \ -lexical patterns in text." -HOMEPAGE = "http://sourceforge.net/projects/flex/" -SECTION = "devel" -LICENSE = "BSD" - -DEPENDS = "${(a)bb.utils.contains('PTEST_ENABLED', '1', 'bison-native flex-native', '', d)}" -BBCLASSEXTEND = "native nativesdk" - -LIC_FILES_CHKSUM = "file://COPYING;md5=e4742cf92e89040b39486a6219b68067" - -SRC_URI = "${SOURCEFORGE_MIRROR}/flex/flex-${PV}.tar.bz2 \ - file://run-ptest \ - file://do_not_create_pdf_doc.patch \ - file://0001-tests-add-a-target-for-building-tests-without-runnin.patch \ - file://0002-avoid-c-comments-in-c-code-fails-with-gcc-6.patch \ - file://CVE-2016-6354.patch \ - ${(a)bb.utils.contains('PTEST_ENABLED', '1', '', 'file://disable-tests.patch', d)} \ - " - -SRC_URI[md5sum] = "266270f13c48ed043d95648075084d59" -SRC_URI[sha256sum] = "24e611ef5a4703a191012f80c1027dc9d12555183ce0ecd46f3636e587e9b8e9" - -# Flex has moved to github from 2.6.1 onwards -UPSTREAM_CHECK_URI = "https://github.com/westes/flex/releases" -UPSTREAM_CHECK_REGEX = "flex-(?P<pver>\d+(\.\d+)+)\.tar" - -inherit autotools gettext texinfo ptest - -M4 = "${bindir}/m4" -M4_class-native = "${STAGING_BINDIR_NATIVE}/m4" -EXTRA_OECONF += "ac_cv_path_M4=${M4}" -EXTRA_OEMAKE += "m4=${STAGING_BINDIR_NATIVE}/m4" - -EXTRA_OEMAKE += "${(a)bb.utils.contains('PTEST_ENABLED', '1', 'FLEX=${STAGING_BINDIR_NATIVE}/flex', '', d)}" - -do_install_append_class-native() { - create_wrapper ${D}/${bindir}/flex M4=${M4} -} - -do_install_append_class-nativesdk() { - create_wrapper ${D}/${bindir}/flex M4=${M4} -} - -RDEPENDS_${PN} += "m4" -RDEPENDS_${PN}-ptest += "bash gawk" - -do_compile_ptest() { - oe_runmake -C ${B}/tests -f ${B}/tests/Makefile top_builddir=${B} INCLUDES=-I${S}/src buildtests -} - -do_install_ptest() { - mkdir -p ${D}${PTEST_PATH}/build-aux/ - cp ${S}/build-aux/test-driver ${D}${PTEST_PATH}/build-aux/ - cp -r ${S}/tests/* ${D}${PTEST_PATH} - cp -r ${B}/tests/* ${D}${PTEST_PATH} - sed -e 's/^Makefile:/_Makefile:/' \ - -e 's/^srcdir = $.*$/srcdir = ./' -e 's/^top_srcdir = $.*$/top_srcdir = ./' \ - -e 's/^builddir = $.*$/builddir = ./' -e 's/^top_builddir = $.*$/top_builddir = ./' \ - -i ${D}${PTEST_PATH}/Makefile -} -- 2.7.4

9 years, 5 months

ldconfig-native

by Denys Dmytriyenko

Hi, Is there a need for a duplicate ldconfig-native recipe in meta-linaro-toolchain: https://git.linaro.org/openembedded/meta-linaro.git/tree/meta-linaro-toolch… It is a duplicate of oe-core recipe: http://cgit.openembedded.org/openembedded-core/tree/meta/recipes-core/glibc… Both of them share the same exact base, but oe-core one has extra 2 patches added later: http://cgit.openembedded.org/openembedded-core/commit/?id=adbf0b1fdf897076e… http://cgit.openembedded.org/openembedded-core/commit/?id=0b0e4d7aa64feded0… Should meta-linaro-toolchain copy be removed to not mask the one from oe-core? -- Denys

9 years, 5 months

external-linaro-toolchain in master with RSS

by Denys Dmytriyenko

BTW, are there plans to fix external-linaro-toolchain flow with recipe specific sysroot in master? Let me know if you need logs or any other help. -- Denys

9 years, 5 months

[meta-linaro-toolchain][jethro/fido/dizzy/daisy][PATCH] gcc: Update SRC_URI to point to archive directory

by Tomohiro Komagata

The compressed files on releases.linaro.org/YY.MM have moved to 'archive' directory. Signed-off-by: Tomohiro Komagata <tomohiro.komagata.aj(a)renesas.com> --- meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.8.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.8.inc b/meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.8.inc index 649b442..701bd11 100644 --- a/meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.8.inc +++ b/meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.8.inc @@ -8,7 +8,7 @@ BINV = "4.8.3" FILESPATH = "${@base_set_filespath([ '${FILE_DIRNAME}/gcc-${PV}' ], d)}" -SRC_URI = "https://releases.linaro.org/${MMYY}/components/toolchain/gcc-linaro/${BASEP… \ +SRC_URI = "https://releases.linaro.org/archive/${MMYY}/components/toolchain/gcc-linaro… \ file://0001-gcc-4.3.1-ARCH_FLAGS_FOR_TARGET.patch \ file://0002-uclibc-conf.patch \ file://0003-gcc-uclibc-locale-ctype_touplow_t.patch \ -- 1.9.1

9 years, 6 months

[BUG][DEVTOOLS] Use of LINKER_HASH_STYLE variable for GCC build (libgcc) with Morty

by Artem Mygaiev

Hello While using Linaro 'meta-linaro-toolchain' layer with own definition of AArch64 machine (not using Linaro's meta-aarch64) I have noticed seemingly incorrect use of LINKER_HASH_STYLE variable. In the current master and morty branches (I have not checked others yet), all meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-*.inc files contain following lines: EXTRA_OECONF_BASE = "\ --disable-bootstrap \ --disable-libmudflap \ --with-system-zlib \ --with-linker-hash-style=${LINKER_HASH_STYLE} \ --enable-linker-build-id \ --with-ppl=no \ --with-cloog=no \ In my case, during the build, meta/recipes-devtools/gcc/gcc-cross.inc gets included and breaks the libgcc qa checks by incorrectly redefining hash style to SysV (snippet below, this was introduced in morty): # While we want the 'gnu' hash style, we explicitly set it to sysv here to # ensure that any recipe which doesn't obey our LDFLAGS (which also set it to # gnu) will hit a QA failure. LINKER_HASH_STYLE ?= "sysv" So, per my understanding, instead of directly using LINKER_HASH_STYLE, Linaro GCC build shall parse LDFLAGS and get correct hash style there. Of course, it may be also hardcoded or otherwise avoided but from the comment above it seems that Yocto engineers explicitly insist on LDFLAGS checking :) Would this approach (use of LDFLAGS instead of LINKER_HASH_STYLE) be acceptable for meta-linaro? Best regards, Artem Mygaiev

9 years, 6 months

Re: [master/morty][PATCH] binutils-crosssdk: match OE-Core, use SDK_SYS suffix instead of SDK/TARGET_ARCH

by Koen Kooi

Added into gerrit: https://review.linaro.org/16545 > Op 21 dec. 2016, om 23:10 heeft Denys Dmytriyenko <denis(a)denix.org> het volgende geschreven: > > From: Denys Dmytriyenko <denys(a)ti.com> > > OE-Core has switched to using SDK_SYS suffix for crosssdk packages, instead of > SDK/TARGET_ARCH in d2eccccb70e809d482c493922f23aef4409cfd82 [1], update Linaro > versions accordingly. > > [1] http://cgit.openembedded.org/openembedded-core/commit/?id=d2eccccb70e809d48… > > Signed-off-by: Denys Dmytriyenko <denys(a)ti.com> > --- > .../recipes-devtools/binutils/binutils-crosssdk_linaro-2.25.bb | 2 +- > .../recipes-devtools/binutils/binutils-crosssdk_linaro-2.27.bb | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.25.bb b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.25.bb > index 1c62ed4..6304613 100644 > --- a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.25.bb > +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.25.bb > @@ -2,7 +2,7 @@ require recipes-devtools/binutils/binutils-cross_${PV}.bb > > inherit crosssdk > > -PN = "binutils-crosssdk-${TARGET_ARCH}" > +PN = "binutils-crosssdk-${SDK_SYS}" > > PROVIDES = "virtual/${TARGET_PREFIX}binutils-crosssdk" > > diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.27.bb b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.27.bb > index 1c62ed4..6304613 100644 > --- a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.27.bb > +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.27.bb > @@ -2,7 +2,7 @@ require recipes-devtools/binutils/binutils-cross_${PV}.bb > > inherit crosssdk > > -PN = "binutils-crosssdk-${TARGET_ARCH}" > +PN = "binutils-crosssdk-${SDK_SYS}" > > PROVIDES = "virtual/${TARGET_PREFIX}binutils-crosssdk" > > -- > 2.7.4 > > _______________________________________________ > linaro-dev mailing list > linaro-dev(a)lists.linaro.org > https://lists.linaro.org/mailman/listinfo/linaro-dev

9 years, 7 months

[morty][PATCH] binutils: add linaro-2.27

by Denys Dmytriyenko

From: Koen Kooi <koen.kooi(a)linaro.org> Change-Id: I8de52f82d737cea2c73316fe0a19408998639954 Signed-off-by: Koen Kooi <koen.kooi(a)linaro.org> Signed-off-by: Denys Dmytriyenko <denys(a)ti.com> --- I just realized, that gcc-6.2 was backported to morty, but binutils-2.27 was not. My previous 2 patches to binutils require this backport. .../binutils-cross-canadian_linaro-2.27.bb | 3 + .../binutils/binutils-cross_linaro-2.27.bb | 3 + .../binutils/binutils-crosssdk_linaro-2.27.bb | 13 + .../binutils/binutils-linaro-2.27.inc | 41 + .../0001-Generate-relocatable-SDKs.patch | 62 + ...ure-widen-the-regexp-for-SH-architectures.patch | 56 + .../0003-Point-scripts-location-to-libdir.patch | 42 + ...te-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch | 41 + .../0005-Explicitly-link-with-libm-on-uclibc.patch | 52 + .../0006-Use-libtool-2.4.patch | 21177 +++++++++++++++++++ ...7-Add-the-armv5e-architecture-to-binutils.patch | 35 + ...he-distro-compiler-point-to-the-wrong-ins.patch | 35 + ...es-of-system-directories-when-cross-linki.patch | 273 + ...-rpath-in-libtool-when-sysroot-is-enabled.patch | 52 + ...Change-default-emulation-for-mips64-linux.patch | 59 + .../0012-Add-support-for-Netlogic-XLP.patch | 413 + ...ncorrect-assembling-for-ppc-wait-mnemonic.patch | 36 + .../0014-libtool-remove-rpath.patch | 100 + ..._sections-check-to-only-consider-compact-.patch | 97 + .../0015-binutils-mips-gas-pic-relax-linkonce.diff | 65 + .../binutils/binutils_linaro-2.27.bb | 45 + 21 files changed, 22700 insertions(+) create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-cross-canadian_linaro-2.27.bb create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-cross_linaro-2.27.bb create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.27.bb create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27.inc create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0001-Generate-relocatable-SDKs.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0002-configure-widen-the-regexp-for-SH-architectures.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0003-Point-scripts-location-to-libdir.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0004-Only-generate-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0005-Explicitly-link-with-libm-on-uclibc.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0006-Use-libtool-2.4.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0007-Add-the-armv5e-architecture-to-binutils.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0008-don-t-let-the-distro-compiler-point-to-the-wrong-ins.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0009-warn-for-uses-of-system-directories-when-cross-linki.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0010-Fix-rpath-in-libtool-when-sysroot-is-enabled.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0011-Change-default-emulation-for-mips64-linux.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0012-Add-support-for-Netlogic-XLP.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0013-fix-the-incorrect-assembling-for-ppc-wait-mnemonic.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0014-libtool-remove-rpath.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0015-Refine-.cfi_sections-check-to-only-consider-compact-.patch create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0015-binutils-mips-gas-pic-relax-linkonce.diff create mode 100644 meta-linaro-toolchain/recipes-devtools/binutils/binutils_linaro-2.27.bb diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-cross-canadian_linaro-2.27.bb b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-cross-canadian_linaro-2.27.bb new file mode 100644 index 0000000..76b6277 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-cross-canadian_linaro-2.27.bb @@ -0,0 +1,3 @@ +require recipes-devtools/binutils/binutils.inc +require recipes-devtools/binutils/binutils-${PV}.inc +require recipes-devtools/binutils/binutils-cross-canadian.inc diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-cross_linaro-2.27.bb b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-cross_linaro-2.27.bb new file mode 100644 index 0000000..a8b918e --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-cross_linaro-2.27.bb @@ -0,0 +1,3 @@ +require recipes-devtools/binutils/binutils.inc +require recipes-devtools/binutils/binutils-${PV}.inc +require recipes-devtools/binutils/binutils-cross.inc diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.27.bb b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.27.bb new file mode 100644 index 0000000..1c62ed4 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-crosssdk_linaro-2.27.bb @@ -0,0 +1,13 @@ +require recipes-devtools/binutils/binutils-cross_${PV}.bb + +inherit crosssdk + +PN = "binutils-crosssdk-${TARGET_ARCH}" + +PROVIDES = "virtual/${TARGET_PREFIX}binutils-crosssdk" + +SRC_URI += "file://relocatable_sdk.patch" + +do_configure_prepend () { + sed -i 's#/usr/local/lib /lib /usr/lib#${SDKPATHNATIVE}/lib ${SDKPATHNATIVE}/usr/lib /usr/local/lib /lib /usr/lib#' ${S}/ld/configure.tgt +} diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27.inc b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27.inc new file mode 100644 index 0000000..f7a7992 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27.inc @@ -0,0 +1,41 @@ +BPV = "2.27.0" +MMYY = "16.10" +RELEASE = "20${MMYY}" +PR = "r20${MMYY}" + +LIC_FILES_CHKSUM="\ + file://COPYING;md5=59530bdf33659b29e73d4adb9f9f6552\ + file://COPYING.LIB;md5=9f604d8a4f8e74f4f5140845a21b6674\ + file://COPYING3;md5=d32239bcb673463ab874e80d47fae504\ + file://COPYING3.LIB;md5=6a6a8e020838b23406c81b19c1d46df6\ + file://gas/COPYING;md5=d32239bcb673463ab874e80d47fae504\ + file://include/COPYING;md5=59530bdf33659b29e73d4adb9f9f6552\ + file://include/COPYING3;md5=d32239bcb673463ab874e80d47fae504\ + file://libiberty/COPYING.LIB;md5=a916467b91076e631dd8edb7424769c7\ + file://bfd/COPYING;md5=d32239bcb673463ab874e80d47fae504\ + " + +SRCREV = "5fe53ce37f9d9dd544ec8cc9e2863b68e1a61f4c" +SRC_URI = "\ + git://git.linaro.org/toolchain/binutils-gdb.git;protocol=https;branch=linar… \ + file://0002-configure-widen-the-regexp-for-SH-architectures.patch \ + file://0003-Point-scripts-location-to-libdir.patch \ + file://0004-Only-generate-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch \ + file://0005-Explicitly-link-with-libm-on-uclibc.patch \ + file://0006-Use-libtool-2.4.patch \ + file://0007-Add-the-armv5e-architecture-to-binutils.patch \ + file://0008-don-t-let-the-distro-compiler-point-to-the-wrong-ins.patch \ + file://0009-warn-for-uses-of-system-directories-when-cross-linki.patch \ + file://0010-Fix-rpath-in-libtool-when-sysroot-is-enabled.patch \ + file://0011-Change-default-emulation-for-mips64-linux.patch \ + file://0012-Add-support-for-Netlogic-XLP.patch \ + file://0013-fix-the-incorrect-assembling-for-ppc-wait-mnemonic.patch \ + file://0014-libtool-remove-rpath.patch \ + file://0015-binutils-mips-gas-pic-relax-linkonce.diff \ + file://0015-Refine-.cfi_sections-check-to-only-consider-compact-.patch \ +" +S = "${WORKDIR}/git" + +do_configure_prepend () { + rm -rf ${S}/gdb ${S}/libdecnumber ${S}/readline ${S}/sim +} diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0001-Generate-relocatable-SDKs.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0001-Generate-relocatable-SDKs.patch new file mode 100644 index 0000000..cad704a --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0001-Generate-relocatable-SDKs.patch @@ -0,0 +1,62 @@ +From 2dae6b137ce609fd008f2063034a4403d95484c5 Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Mon, 2 Mar 2015 01:58:54 +0000 +Subject: [PATCH 01/13] Generate relocatable SDKs + +This patch will modify the ELF linker scripts so that the crosssdk +linker will generate binaries with a 4096 bytes PT_INTERP section. When the binaries +will be relocated, at SDK install time, the interpreter path can be easily +changed by the relocating script. + +Upstream-Status: Inappropriate [SDK specific] + +Signed-off-by: Laurentiu Palcu <laurentiu.palcu(a)intel.com> +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + ld/genscripts.sh | 3 +++ + ld/scripttempl/elf.sc | 4 ++-- + 2 files changed, 5 insertions(+), 2 deletions(-) + +diff --git a/ld/genscripts.sh b/ld/genscripts.sh +index eb262e7..1a3b8bc 100755 +--- a/ld/genscripts.sh ++++ b/ld/genscripts.sh +@@ -277,6 +277,7 @@ DATA_ALIGNMENT_u="${DATA_ALIGNMENT_u-${DATA_ALIGNMENT_r}}" + LD_FLAG=r + DATA_ALIGNMENT=${DATA_ALIGNMENT_r} + DEFAULT_DATA_ALIGNMENT="ALIGN(${SEGMENT_SIZE})" ++PARTIAL_LINKING=" " + ( echo "/* Script for ld -r: link without relocation */" + . ${CUSTOMIZER_SCRIPT} + . ${srcdir}/scripttempl/${SCRIPT_NAME}.sc +@@ -285,10 +286,12 @@ DEFAULT_DATA_ALIGNMENT="ALIGN(${SEGMENT_SIZE})" + LD_FLAG=u + DATA_ALIGNMENT=${DATA_ALIGNMENT_u} + CONSTRUCTING=" " ++PARTIAL_LINKING=" " + ( echo "/* Script for ld -Ur: link w/out relocation, do create constructors */" + . ${CUSTOMIZER_SCRIPT} + . ${srcdir}/scripttempl/${SCRIPT_NAME}.sc + ) | sed -e '/^ *$/d;s/[ ]*$//' > ldscripts/${EMULATION_NAME}.xu ++unset PARTIAL_LINKING + + LD_FLAG= + DATA_ALIGNMENT=${DATA_ALIGNMENT_} +diff --git a/ld/scripttempl/elf.sc b/ld/scripttempl/elf.sc +index f0c6439..223c55f 100644 +--- a/ld/scripttempl/elf.sc ++++ b/ld/scripttempl/elf.sc +@@ -136,8 +136,8 @@ if test -n "${COMMONPAGESIZE}"; then + DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" + DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);" + fi +-if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then +- INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }" ++if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}${PARTIAL_LINKING}"; then ++ INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp); . = 0x1000; }" + fi + if test -z "$PLT"; then + IPLT=".iplt ${RELOCATING-0} : { *(.iplt) }" +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0002-configure-widen-the-regexp-for-SH-architectures.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0002-configure-widen-the-regexp-for-SH-architectures.patch new file mode 100644 index 0000000..8d7cf00 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0002-configure-widen-the-regexp-for-SH-architectures.patch @@ -0,0 +1,56 @@ +From e4cd40722f597dff39c7214fab1742dd5bcc67eb Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Mon, 2 Mar 2015 01:07:33 +0000 +Subject: [PATCH 02/13] configure: widen the regexp for SH architectures + +gprof needs to know about uclibc + +Upstream-Status: Pending + +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + configure | 4 ++-- + gprof/configure | 5 +++++ + 2 files changed, 7 insertions(+), 2 deletions(-) + +diff --git a/configure b/configure +index ad3dfb7..2a74a77 100755 +--- a/configure ++++ b/configure +@@ -3444,7 +3444,7 @@ case "${target}" in + ;; + s390-*-* | s390x-*-*) + ;; +- sh-*-* | sh[34]*-*-*) ++ sh*-*-* | sh[34]*-*-*) + ;; + sh64-*-* | sh5*-*-*) + ;; +@@ -3946,7 +3946,7 @@ case "${target}" in + or1k*-*-*) + noconfigdirs="$noconfigdirs gdb" + ;; +- sh-*-* | sh64-*-*) ++ sh*-*-* | sh64-*-*) + case "${target}" in + sh*-*-elf) + ;; +diff --git a/gprof/configure b/gprof/configure +index bf3ecaa..626e1c7 100755 +--- a/gprof/configure ++++ b/gprof/configure +@@ -5873,6 +5873,11 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + ++linux-uclibc*) ++ lt_cv_deplibs_check_method=pass_all ++ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so` ++ ;; ++ + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0003-Point-scripts-location-to-libdir.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0003-Point-scripts-location-to-libdir.patch new file mode 100644 index 0000000..acc198b --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0003-Point-scripts-location-to-libdir.patch @@ -0,0 +1,42 @@ +From 93c49f6197bd59b2abbf04b3296bf10029b80f48 Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Mon, 2 Mar 2015 01:09:58 +0000 +Subject: [PATCH 03/13] Point scripts location to libdir + +Upstream-Status: Inappropriate [debian patch] + +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + ld/Makefile.am | 2 +- + ld/Makefile.in | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/ld/Makefile.am b/ld/Makefile.am +index 0598923..b478ba7 100644 +--- a/ld/Makefile.am ++++ b/ld/Makefile.am +@@ -57,7 +57,7 @@ endif + # We put the scripts in the directory $(scriptdir)/ldscripts. + # We can't put the scripts in $(datadir) because the SEARCH_DIR + # directives need to be different for native and cross linkers. +-scriptdir = $(tooldir)/lib ++scriptdir = $(libdir) + + EMUL = @EMUL@ + EMULATION_OFILES = @EMULATION_OFILES@ +diff --git a/ld/Makefile.in b/ld/Makefile.in +index 7c78198..5eb67e0 100644 +--- a/ld/Makefile.in ++++ b/ld/Makefile.in +@@ -451,7 +451,7 @@ AM_CFLAGS = $(WARN_CFLAGS) $(ELF_CLFAGS) + # We put the scripts in the directory $(scriptdir)/ldscripts. + # We can't put the scripts in $(datadir) because the SEARCH_DIR + # directives need to be different for native and cross linkers. +-scriptdir = $(tooldir)/lib ++scriptdir = $(libdir) + BASEDIR = $(srcdir)/.. + BFDDIR = $(BASEDIR)/bfd + INCDIR = $(BASEDIR)/include +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0004-Only-generate-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0004-Only-generate-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch new file mode 100644 index 0000000..28a17f3 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0004-Only-generate-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch @@ -0,0 +1,41 @@ +From 4ff83779de8621715c6c2a79cf7ed8d74ff2d7c5 Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Mon, 2 Mar 2015 01:27:17 +0000 +Subject: [PATCH 04/13] Only generate an RPATH entry if LD_RUN_PATH is not + empty + +for cases where -rpath isn't specified. debian (#151024) + +Upstream-Status: Pending + +Signed-off-by: Chris Chimelis <chris(a)debian.org> +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + ld/emultempl/elf32.em | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/ld/emultempl/elf32.em b/ld/emultempl/elf32.em +index 47fa549..f4c640e 100644 +--- a/ld/emultempl/elf32.em ++++ b/ld/emultempl/elf32.em +@@ -1244,6 +1244,8 @@ fragment <<EOF + && command_line.rpath == NULL) + { + lib_path = (const char *) getenv ("LD_RUN_PATH"); ++ if ((lib_path) && (strlen (lib_path) == 0)) ++ lib_path = NULL; + if (gld${EMULATION_NAME}_search_needed (lib_path, &n, + force)) + break; +@@ -1525,6 +1527,8 @@ gld${EMULATION_NAME}_before_allocation (void) + rpath = command_line.rpath; + if (rpath == NULL) + rpath = (const char *) getenv ("LD_RUN_PATH"); ++ if ((rpath) && (strlen (rpath) == 0)) ++ rpath = NULL; + + for (abfd = link_info.input_bfds; abfd; abfd = abfd->link.next) + if (bfd_get_flavour (abfd) == bfd_target_elf_flavour) +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0005-Explicitly-link-with-libm-on-uclibc.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0005-Explicitly-link-with-libm-on-uclibc.patch new file mode 100644 index 0000000..331f782 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0005-Explicitly-link-with-libm-on-uclibc.patch @@ -0,0 +1,52 @@ +From 18a7ae169e8d55ace683357d1de6b07e4fdf797a Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Mon, 2 Mar 2015 01:32:49 +0000 +Subject: [PATCH 05/13] Explicitly link with libm on uclibc + +Description: + +We do not need to have the libtool patch anymore for binutils after +libtool has been updated upstream it include support for it. However +for building gas natively on uclibc systems we have to link it with +-lm so that it picks up missing symbols. + +/local/build_area/BUILD/arm_v5t_le_uclibc/binutils-2.17.50/objdir/libiberty/pic/libiberty.a(floatformat.o): +In function `floatformat_from_double': +floatformat.c:(.text+0x1ec): undefined reference to `frexp' +floatformat.c:(.text+0x2f8): undefined reference to `ldexp' +/local/build_area/BUILD/arm_v5t_le_uclibc/binutils-2.17.50/objdir/libiberty/pic/libiberty.a(floatformat.o): +In function `floatformat_to_double': +floatformat.c:(.text+0x38a): undefined reference to `ldexp' +floatformat.c:(.text+0x3d2): undefined reference to `ldexp' +floatformat.c:(.text+0x43e): undefined reference to `ldexp' +floatformat.c:(.text+0x4e2): undefined reference to `ldexp' +collect2: ld returned 1 exit status +make[4]: *** [as-new] Error 1 + +Upstream-Status: Pending + +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + gas/configure.tgt | 6 ++++++ + 1 file changed, 6 insertions(+) + +diff --git a/gas/configure.tgt b/gas/configure.tgt +index e2df659..1b9fd99 100644 +--- a/gas/configure.tgt ++++ b/gas/configure.tgt +@@ -487,6 +487,12 @@ case ${generic_target} in + *-*-netware) fmt=elf em=netware ;; + esac + ++case ${generic_target} in ++ arm-*-*uclibc*) ++ need_libm=yes ++ ;; ++esac ++ + case ${cpu_type} in + aarch64 | alpha | arm | i386 | ia64 | microblaze | mips | ns32k | or1k | or1knd | pdp11 | ppc | sparc | z80 | z8k) + bfd_gas=yes +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0006-Use-libtool-2.4.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0006-Use-libtool-2.4.patch new file mode 100644 index 0000000..f0fdf46 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0006-Use-libtool-2.4.patch @@ -0,0 +1,21177 @@ +From 71adcde3648db47f7fa155db12810591ffd3ae34 Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Sun, 14 Feb 2016 17:04:07 +0000 +Subject: [PATCH 06/13] Use libtool 2.4 + +get libtool sysroot support + +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- +Upstream-Status: Pending + + bfd/configure | 1318 +++++++++++++++++------ + bfd/configure.ac | 2 +- + binutils/configure | 1316 +++++++++++++++++------ + configure | 4 +- + gas/configure | 1314 +++++++++++++++++------ + gprof/configure | 1321 +++++++++++++++++------ + ld/configure | 1691 +++++++++++++++++++++-------- + libtool.m4 | 1080 +++++++++++++------ + ltmain.sh | 2925 +++++++++++++++++++++++++++++++++----------------- + ltoptions.m4 | 2 +- + ltversion.m4 | 12 +- + lt~obsolete.m4 | 2 +- + opcodes/configure | 1318 +++++++++++++++++------ + opcodes/configure.ac | 2 +- + zlib/configure | 1320 +++++++++++++++++------ + 15 files changed, 9930 insertions(+), 3697 deletions(-) + +diff --git a/bfd/configure b/bfd/configure +index a437569..575a257 100755 +--- a/bfd/configure ++++ b/bfd/configure +@@ -671,6 +671,9 @@ OTOOL + LIPO + NMEDIT + DSYMUTIL ++MANIFEST_TOOL ++ac_ct_AR ++DLLTOOL + OBJDUMP + LN_S + NM +@@ -784,6 +787,7 @@ enable_static + with_pic + enable_fast_install + with_gnu_ld ++with_libtool_sysroot + enable_libtool_lock + enable_plugins + enable_largefile +@@ -1460,6 +1464,8 @@ Optional Packages: + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] ++ --with-libtool-sysroot=DIR Search for dependent libraries within DIR ++ (or the compiler's sysroot if not specified). + --with-mmap try using mmap for BFD input files if available + --with-separate-debug-dir=DIR + Look for global separate debug info in DIR +@@ -5392,8 +5398,8 @@ esac + + + +-macro_version='2.2.7a' +-macro_revision='1.3134' ++macro_version='2.4' ++macro_revision='1.3293' + + + +@@ -5433,7 +5439,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 + $as_echo_n "checking how to print strings... " >&6; } + # Test print first, because it will be a builtin if present. +-if test "X`print -r -- -n 2>/dev/null`" = X-n && \ ++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' + elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then +@@ -6119,8 +6125,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; + # Try some XSI features + xsi_shell=no + ( _lt_dummy="a/b/c" +- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ +- = c,a/b,, \ ++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +@@ -6169,6 +6175,80 @@ esac + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 ++$as_echo_n "checking how to convert $build file names to $host format... " >&6; } ++if test "${lt_cv_to_host_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ++ ;; ++ esac ++ ;; ++ *-*-cygwin* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ++ ;; ++ esac ++ ;; ++ * ) # unhandled hosts (and "normal" native builds) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++esac ++ ++fi ++ ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 ++$as_echo "$lt_cv_to_host_file_cmd" >&6; } ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 ++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } ++if test "${lt_cv_to_tool_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ #assume ordinary cross tools, or native build. ++lt_cv_to_tool_file_cmd=func_convert_file_noop ++case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ esac ++ ;; ++esac ++ ++fi ++ ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 ++$as_echo "$lt_cv_to_tool_file_cmd" >&6; } ++ ++ ++ ++ ++ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 + $as_echo_n "checking for $LD option to reload object files... " >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then : +@@ -6185,6 +6265,11 @@ case $reload_flag in + esac + reload_cmds='$LD$reload_flag -o $output$reload_objs' + case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ if test "$GCC" != yes; then ++ reload_cmds=false ++ fi ++ ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' +@@ -6353,7 +6438,8 @@ mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ # Keep this pattern in sync with the one in func_win32_libid. ++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; +@@ -6507,6 +6593,21 @@ esac + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 + $as_echo "$lt_cv_deplibs_check_method" >&6; } ++ ++file_magic_glob= ++want_nocaseglob=no ++if test "$build" = "$host"; then ++ case $host_os in ++ mingw* | pw32*) ++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then ++ want_nocaseglob=yes ++ else ++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/$..$/s\/[\1]\/[\1]\/g;/g"` ++ fi ++ ;; ++ esac ++fi ++ + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -6522,9 +6623,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ + if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ar; ac_word=$2 ++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$DLLTOOL"; then ++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++DLLTOOL=$ac_cv_prog_DLLTOOL ++if test -n "$DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 ++$as_echo "$DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DLLTOOL"; then ++ ac_ct_DLLTOOL=$DLLTOOL ++ # Extract the first word of "dlltool", so it can be a program name with args. ++set dummy dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_DLLTOOL"; then ++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DLLTOOL="dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL ++if test -n "$ac_ct_DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 ++$as_echo "$ac_ct_DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_DLLTOOL" = x; then ++ DLLTOOL="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ DLLTOOL=$ac_ct_DLLTOOL ++ fi ++else ++ DLLTOOL="$ac_cv_prog_DLLTOOL" ++fi ++ ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 ++$as_echo_n "checking how to associate runtime and link libraries... " >&6; } ++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_sharedlib_from_linklib_cmd='unknown' ++ ++case $host_os in ++cygwin* | mingw* | pw32* | cegcc*) ++ # two different shell functions defined in ltmain.sh ++ # decide which to use based on capabilities of $DLLTOOL ++ case `$DLLTOOL --help 2>&1` in ++ *--identify-strict*) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ++ ;; ++ *) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ++ ;; ++ esac ++ ;; ++*) ++ # fallback: assume linklib IS sharedlib ++ lt_cv_sharedlib_from_linklib_cmd="$ECHO" ++ ;; ++esac ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 ++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } ++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd ++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ for ac_prog in ar ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_AR+set}" = set; then : +@@ -6540,7 +6794,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_AR="${ac_tool_prefix}ar" ++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6560,11 +6814,15 @@ $as_echo "no" >&6; } + fi + + ++ test -n "$AR" && break ++ done + fi +-if test -z "$ac_cv_prog_AR"; then ++if test -z "$AR"; then + ac_ct_AR=$AR +- # Extract the first word of "ar", so it can be a program name with args. +-set dummy ar; ac_word=$2 ++ for ac_prog in ar ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : +@@ -6580,7 +6838,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_AR="ar" ++ ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6599,6 +6857,10 @@ else + $as_echo "no" >&6; } + fi + ++ ++ test -n "$ac_ct_AR" && break ++done ++ + if test "x$ac_ct_AR" = x; then + AR="false" + else +@@ -6610,16 +6872,72 @@ ac_tool_warned=yes ;; + esac + AR=$ac_ct_AR + fi +-else +- AR="$ac_cv_prog_AR" + fi + +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru ++: ${AR=ar} ++: ${AR_FLAGS=cru} ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 ++$as_echo_n "checking for archiver @FILE support... " >&6; } ++if test "${lt_cv_ar_at_file+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_ar_at_file=no ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ + ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ echo conftest.$ac_objext > conftest.lst ++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -eq 0; then ++ # Ensure the archiver fails upon bogus file names. ++ rm -f conftest.$ac_objext libconftest.a ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -ne 0; then ++ lt_cv_ar_at_file=@ ++ fi ++ fi ++ rm -f conftest.* libconftest.a + ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 ++$as_echo "$lt_cv_ar_at_file" >&6; } + ++if test "x$lt_cv_ar_at_file" = xno; then ++ archiver_list_spec= ++else ++ archiver_list_spec=$lt_cv_ar_at_file ++fi + + + +@@ -6961,8 +7279,8 @@ esac + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" + + # Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" +-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" + + # Handle CRLF in mingw tool chain + opt_cr= +@@ -6998,6 +7316,7 @@ for ac_symprfx in "" "_"; do + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi ++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -7039,6 +7358,18 @@ _LT_EOF + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext ++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ ++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) ++/* DATA imports from DLLs on WIN32 con't be const, because runtime ++ relocations are performed -- see ld's documentation on pseudo-relocs. */ ++# define LT_DLSYM_CONST ++#elif defined(__osf__) ++/* This system does not cope well with relocations in const data. */ ++# define LT_DLSYM_CONST ++#else ++# define LT_DLSYM_CONST const ++#endif ++ + #ifdef __cplusplus + extern "C" { + #endif +@@ -7050,7 +7381,7 @@ _LT_EOF + cat <<_LT_EOF >> conftest.$ac_ext + + /* The mapping between symbol names and symbols. */ +-const struct { ++LT_DLSYM_CONST struct { + const char *name; + void *address; + } +@@ -7076,8 +7407,8 @@ static const void *lt_preloaded_setup() { + _LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" ++ lt_globsym_save_LIBS=$LIBS ++ lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 +@@ -7087,8 +7418,8 @@ _LT_EOF + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" ++ LIBS=$lt_globsym_save_LIBS ++ CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi +@@ -7125,6 +7456,16 @@ else + $as_echo "ok" >&6; } + fi + ++# Response file support. ++if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ nm_file_list_spec='@' ++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then ++ nm_file_list_spec='@' ++fi ++ ++ ++ ++ + + + +@@ -7146,6 +7487,45 @@ fi + + + ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 ++$as_echo_n "checking for sysroot... " >&6; } ++ ++# Check whether --with-libtool-sysroot was given. ++if test "${with_libtool_sysroot+set}" = set; then : ++ withval=$with_libtool_sysroot; ++else ++ with_libtool_sysroot=no ++fi ++ ++ ++lt_sysroot= ++case ${with_libtool_sysroot} in #( ++ yes) ++ if test "$GCC" = yes; then ++ lt_sysroot=`$CC --print-sysroot 2>/dev/null` ++ fi ++ ;; #( ++ /*) ++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"` ++ ;; #( ++ no|'') ++ ;; #( ++ *) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5 ++$as_echo "${with_libtool_sysroot}" >&6; } ++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5 ++ ;; ++esac ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 ++$as_echo "${lt_sysroot:-no}" >&6; } ++ ++ ++ ++ ++ + # Check whether --enable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +@@ -7352,6 +7732,123 @@ esac + + need_locks="$enable_libtool_lock" + ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. ++set dummy ${ac_tool_prefix}mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$MANIFEST_TOOL"; then ++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL ++if test -n "$MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 ++$as_echo "$MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL ++ # Extract the first word of "mt", so it can be a program name with args. ++set dummy mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_MANIFEST_TOOL"; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL ++if test -n "$ac_ct_MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 ++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_MANIFEST_TOOL" = x; then ++ MANIFEST_TOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL ++ fi ++else ++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" ++fi ++ ++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 ++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } ++if test "${lt_cv_path_mainfest_tool+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_path_mainfest_tool=no ++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 ++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out ++ cat conftest.err >&5 ++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then ++ lt_cv_path_mainfest_tool=yes ++ fi ++ rm -f conftest* ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 ++$as_echo "$lt_cv_path_mainfest_tool" >&6; } ++if test "x$lt_cv_path_mainfest_tool" != xyes; then ++ MANIFEST_TOOL=: ++fi ++ ++ ++ ++ ++ + + case $host_os in + rhapsody* | darwin*) +@@ -7915,6 +8412,8 @@ _LT_EOF + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 ++ echo "$RANLIB libconftest.a" >&5 ++ $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF + int main() { return 0;} + _LT_EOF +@@ -8079,7 +8578,8 @@ fi + LIBTOOL_DEPS="$ltmain" + + # Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++LIBTOOL='$(SHELL) $(top_builddir)' ++LIBTOOL="$LIBTOOL/${host_alias}-libtool" + + + +@@ -8168,7 +8668,7 @@ aix3*) + esac + + # Global variables: +-ofile=libtool ++ofile=${host_alias}-libtool + can_build_shared=yes + + # All known linkers require a `.a' archive for static linking (except MSVC, +@@ -8466,8 +8966,6 @@ fi + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -8633,6 +9131,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; ++ nagfor*) ++ # NAG Fortran compiler ++ lt_prog_compiler_wl='-Wl,-Wl,,' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) +@@ -8695,7 +9199,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in +- f77* | f90* | f95*) ++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; +@@ -8752,13 +9256,17 @@ case $host_os in + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; + esac +-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 +-$as_echo "$lt_prog_compiler_pic" >&6; } +- +- +- +- + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 ++$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++if test "${lt_cv_prog_compiler_pic+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 ++$as_echo "$lt_cv_prog_compiler_pic" >&6; } ++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + + # + # Check to make sure the PIC flag actually works. +@@ -8819,6 +9327,11 @@ fi + + + ++ ++ ++ ++ ++ + # + # Check to make sure the static flag actually works. + # +@@ -9169,7 +9682,8 @@ _LT_EOF + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' ++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +@@ -9268,12 +9782,12 @@ _LT_EOF + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' +- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ +- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac +@@ -9287,8 +9801,8 @@ _LT_EOF + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + +@@ -9306,8 +9820,8 @@ _LT_EOF + + _LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -9353,8 +9867,8 @@ _LT_EOF + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -9484,7 +9998,13 @@ _LT_EOF + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9497,22 +10017,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +@@ -9524,7 +10051,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + else + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9537,22 +10070,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, +@@ -9597,20 +10137,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_from_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes=yes ++ case $cc_basename in ++ cl*) ++ # Native MSVC ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ file_list_spec='@' ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ sed -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; ++ else ++ sed -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; ++ fi~ ++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ ++ linknames=' ++ # The linker will not automatically build a static lib if we build a DLL. ++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true' ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ # Don't use ranlib ++ old_postinstall_cmds='chmod 644 $oldlib' ++ postlink_cmds='lt_outputfile="@OUTPUT@"~ ++ lt_tool_outputfile="@TOOL_OUTPUT@"~ ++ case $lt_outputfile in ++ *.exe|*.EXE) ;; ++ *) ++ lt_outputfile="$lt_outputfile.exe" ++ lt_tool_outputfile="$lt_tool_outputfile.exe" ++ ;; ++ esac~ ++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then ++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; ++ $RM "$lt_outputfile.manifest"; ++ fi' ++ ;; ++ *) ++ # Assume MSVC wrapper ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ esac + ;; + + darwin* | rhapsody*) +@@ -9671,7 +10254,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no +@@ -9679,7 +10262,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux9*) + if test "$GCC" = yes; then +- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi +@@ -9695,7 +10278,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi +@@ -9719,10 +10302,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +@@ -9801,23 +10384,36 @@ fi + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ # This should be the same for all languages, so no per-tag cache variable. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 ++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } ++if test "${lt_cv_irix_exported_symbol+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-int foo(void) {} ++int foo (void) { return 0; } + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' +- ++ lt_cv_irix_exported_symbol=yes ++else ++ lt_cv_irix_exported_symbol=no + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +- LDFLAGS="$save_LDFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 ++$as_echo "$lt_cv_irix_exported_symbol" >&6; } ++ if test "$lt_cv_irix_exported_symbol" = yes; then ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' +@@ -9902,7 +10498,7 @@ rm -f core conftest.err conftest.$ac_objext \ + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' +@@ -9921,9 +10517,9 @@ rm -f core conftest.err conftest.$ac_objext \ + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' +- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) +@@ -10499,8 +11095,9 @@ cygwin* | mingw* | pw32* | cegcc*) + need_version=no + need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ case $GCC,$cc_basename in ++ yes,*) ++ # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +@@ -10533,13 +11130,71 @@ cygwin* | mingw* | pw32* | cegcc*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac ++ dynamic_linker='Win32 ld.exe' ++ ;; ++ ++ *,cl*) ++ # Native MSVC ++ libname_spec='$name' ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='${libname}.dll.lib' ++ ++ case $build_os in ++ mingw*) ++ sys_lib_search_path_spec= ++ lt_save_ifs=$IFS ++ IFS=';' ++ for lt_path in $LIB ++ do ++ IFS=$lt_save_ifs ++ # Let DOS variable expansion print the short 8.3 style file name. ++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` ++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" ++ done ++ IFS=$lt_save_ifs ++ # Convert to MSYS style. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \$[a-zA-Z]\$:| /\\1|g' -e 's|^ ||'` ++ ;; ++ cygwin*) ++ # Convert to unix form, then to dos form, then back to unix form ++ # but this time dos style (no spaces!) so that the unix form looks ++ # like /cygdrive/c/PROGRA~1:/cygdr... ++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` ++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` ++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ ;; ++ *) ++ sys_lib_search_path_spec="$LIB" ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # FIXME: find the short name or the path components, as spaces are ++ # common. (e.g. "Program Files" -> "PROGRA~1") ++ ;; ++ esac ++ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ dynamic_linker='Win32 link.exe' + ;; + + *) ++ # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ dynamic_linker='Win32 ld.exe' + ;; + esac +- dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +@@ -10631,7 +11286,7 @@ haiku*) + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes +- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib' ++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +@@ -11471,10 +12126,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -11577,10 +12232,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -14078,7 +14733,7 @@ SHARED_LDFLAGS= + if test "$enable_shared" = "yes"; then + x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'` + if test -n "$x"; then +- SHARED_LIBADD="-L`pwd`/../libiberty/pic -liberty" ++ SHARED_LIBADD="`pwd`/../libiberty/pic/libiberty.a" + fi + + # More hacks to build DLLs on Windows. +@@ -16789,13 +17444,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' + lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' + lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' + lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' + reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' + reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' + OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' + deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' + file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' ++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' ++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' ++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' ++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' + AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' + AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' ++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' + STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' + RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' + old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +@@ -16810,14 +17472,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de + lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' ++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' ++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' + objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' + MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' + lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' + need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' ++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' + DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' + NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' + LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +@@ -16850,12 +17515,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q + hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' + inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' + link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`' + always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' + export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' + exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' + include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' + prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' ++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' + file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' + variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' + need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +@@ -16910,8 +17575,13 @@ reload_flag \ + OBJDUMP \ + deplibs_check_method \ + file_magic_cmd \ ++file_magic_glob \ ++want_nocaseglob \ ++DLLTOOL \ ++sharedlib_from_linklib_cmd \ + AR \ + AR_FLAGS \ ++archiver_list_spec \ + STRIP \ + RANLIB \ + CC \ +@@ -16921,12 +17591,14 @@ lt_cv_sys_global_symbol_pipe \ + lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++nm_file_list_spec \ + lt_prog_compiler_no_builtin_flag \ +-lt_prog_compiler_wl \ + lt_prog_compiler_pic \ ++lt_prog_compiler_wl \ + lt_prog_compiler_static \ + lt_cv_prog_compiler_c_o \ + need_locks \ ++MANIFEST_TOOL \ + DSYMUTIL \ + NMEDIT \ + LIPO \ +@@ -16942,7 +17614,6 @@ no_undefined_flag \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ +-fix_srcfile_path \ + exclude_expsyms \ + include_expsyms \ + file_list_spec \ +@@ -16978,6 +17649,7 @@ module_cmds \ + module_expsym_cmds \ + export_symbols_cmds \ + prelink_cmds \ ++postlink_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + finish_cmds \ +@@ -17757,7 +18429,8 @@ $as_echo X"$file" | + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, ++# Inc. + # Written by Gordon Matzigkeit, 1996 + # + # This file is part of GNU Libtool. +@@ -17860,19 +18533,42 @@ SP2NL=$lt_lt_SP2NL + # turn newlines into spaces. + NL2SP=$lt_lt_NL2SP + ++# convert \$build file names to \$host format. ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++ ++# convert \$build files to toolchain format. ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++ + # An object symbol dumper. + OBJDUMP=$lt_OBJDUMP + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + +-# Command to use when deplibs_check_method == "file_magic". ++# Command to use when deplibs_check_method = "file_magic". + file_magic_cmd=$lt_file_magic_cmd + ++# How to find potential files when deplibs_check_method = "file_magic". ++file_magic_glob=$lt_file_magic_glob ++ ++# Find potential files using nocaseglob when deplibs_check_method = "file_magic". ++want_nocaseglob=$lt_want_nocaseglob ++ ++# DLL creation program. ++DLLTOOL=$lt_DLLTOOL ++ ++# Command to associate shared and link libraries. ++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd ++ + # The archiver. + AR=$lt_AR ++ ++# Flags to create an archive. + AR_FLAGS=$lt_AR_FLAGS + ++# How to feed a file listing to the archiver. ++archiver_list_spec=$lt_archiver_list_spec ++ + # A symbol stripping program. + STRIP=$lt_STRIP + +@@ -17902,6 +18598,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + # Transform the output of nm in a C name address pair when lib prefix is needed. + global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + ++# Specify filename containing input files for \$NM. ++nm_file_list_spec=$lt_nm_file_list_spec ++ ++# The root where to search for dependent libraries,and in which our libraries should be installed. ++lt_sysroot=$lt_sysroot ++ + # The name of the directory that contains temporary libtool files. + objdir=$objdir + +@@ -17911,6 +18613,9 @@ MAGIC_CMD=$MAGIC_CMD + # Must we lock files when doing compilation? + need_locks=$lt_need_locks + ++# Manifest tool. ++MANIFEST_TOOL=$lt_MANIFEST_TOOL ++ + # Tool to manipulate archived DWARF debug symbol files on Mac OS X. + DSYMUTIL=$lt_DSYMUTIL + +@@ -18025,12 +18730,12 @@ with_gcc=$GCC + # Compiler flag to turn off builtin functions. + no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl +- + # Additional compiler flags for building library objects. + pic_flag=$lt_lt_prog_compiler_pic + ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ + # Compiler flag to prevent dynamic linking. + link_static_flag=$lt_lt_prog_compiler_static + +@@ -18117,9 +18822,6 @@ inherit_rpath=$inherit_rpath + # Whether libtool must link a program against all its dependency libraries. + link_all_deplibs=$link_all_deplibs + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- + # Set to "yes" if exported symbols are required. + always_export_symbols=$always_export_symbols + +@@ -18135,6 +18837,9 @@ include_expsyms=$lt_include_expsyms + # Commands necessary for linking programs (against libraries) with templates. + prelink_cmds=$lt_prelink_cmds + ++# Commands necessary for finishing linking programs. ++postlink_cmds=$lt_postlink_cmds ++ + # Specify filename containing input files. + file_list_spec=$lt_file_list_spec + +@@ -18167,210 +18872,169 @@ ltmain="$ac_aux_dir/ltmain.sh" + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? +- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- case $xsi_shell in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result="${1##*/}" +-} +- +-# func_dirname_and_basename file append nondir_replacement +-# perform func_basename and func_dirname in a single function +-# call: +-# dirname: Compute the dirname of FILE. If nonempty, +-# add APPEND to the result, otherwise set result +-# to NONDIR_REPLACEMENT. +-# value returned in "$func_dirname_result" +-# basename: Compute filename of FILE. +-# value retuned in "$func_basename_result" +-# Implementation must be kept synchronized with func_dirname +-# and func_basename. For efficiency, we do not delegate to +-# those functions but instead duplicate the functionality here. +-func_dirname_and_basename () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +- func_basename_result="${1##*/}" +-} +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-func_stripname () +-{ +- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are +- # positional parameters, so assign one to ordinary parameter first. +- func_stripname_result=${3} +- func_stripname_result=${func_stripname_result#"${1}"} +- func_stripname_result=${func_stripname_result%"${2}"} +-} +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=${1%%=*} +- func_opt_split_arg=${1#*=} +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- case ${1} in +- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; +- *) func_lo2o_result=${1} ;; +- esac +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=${1%.*}.lo +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=$(( $* )) +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=${#1} +-} +- +-_LT_EOF +- ;; +- *) # Bourne compatible functions. +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- # Extract subdirectory from the argument. +- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` +- if test "X$func_dirname_result" = "X${1}"; then +- func_dirname_result="${3}" +- else +- func_dirname_result="$func_dirname_result${2}" +- fi +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result=`$ECHO "${1}" | $SED "$basename"` +-} +- +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-# func_strip_suffix prefix name +-func_stripname () +-{ +- case ${2} in +- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; +- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; +- esac +-} +- +-# sed scripts: +-my_sed_long_opt='1s/^$-[^=]*$=.*/\1/;q' +-my_sed_long_arg='1s/^-[^=]*=//' +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` +- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=`expr "$@"` +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +-} +- +-_LT_EOF +-esac +- +-case $lt_shell_append in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1+=\$2" +-} +-_LT_EOF +- ;; +- *) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1=\$$1\$2" +-} +- +-_LT_EOF +- ;; +- esac +- +- +- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || ++ sed '$q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ if test x"$xsi_shell" = xyes; then ++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ ++func_dirname ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_basename ()$/,/^} # func_basename /c\ ++func_basename ()\ ++{\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ ++func_dirname_and_basename ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ ++func_stripname ()\ ++{\ ++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ ++\ # positional parameters, so assign one to ordinary parameter first.\ ++\ func_stripname_result=${3}\ ++\ func_stripname_result=${func_stripname_result#"${1}"}\ ++\ func_stripname_result=${func_stripname_result%"${2}"}\ ++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ ++func_split_long_opt ()\ ++{\ ++\ func_split_long_opt_name=${1%%=*}\ ++\ func_split_long_opt_arg=${1#*=}\ ++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ ++func_split_short_opt ()\ ++{\ ++\ func_split_short_opt_arg=${1#??}\ ++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ ++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ ++func_lo2o ()\ ++{\ ++\ case ${1} in\ ++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ ++\ *) func_lo2o_result=${1} ;;\ ++\ esac\ ++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_xform ()$/,/^} # func_xform /c\ ++func_xform ()\ ++{\ ++ func_xform_result=${1%.*}.lo\ ++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_arith ()$/,/^} # func_arith /c\ ++func_arith ()\ ++{\ ++ func_arith_result=$(( $* ))\ ++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_len ()$/,/^} # func_len /c\ ++func_len ()\ ++{\ ++ func_len_result=${#1}\ ++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++fi ++ ++if test x"$lt_shell_append" = xyes; then ++ sed -e '/^func_append ()$/,/^} # func_append /c\ ++func_append ()\ ++{\ ++ eval "${1}+=\\${2}"\ ++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ ++func_append_quoted ()\ ++{\ ++\ func_quote_for_eval "${2}"\ ++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ ++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ # Save a `func_append' function call where possible by direct use of '+=' ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1+="%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++else ++ # Save a `func_append' function call even when '+=' is not available ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++fi ++ ++if test x"$_lt_function_replace_fail" = x":"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 ++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} ++fi ++ ++ ++ mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +diff --git a/bfd/configure.ac b/bfd/configure.ac +index 669cff7..5f57877 100644 +--- a/bfd/configure.ac ++++ b/bfd/configure.ac +@@ -253,7 +253,7 @@ changequote(,)dnl + x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'` + changequote([,])dnl + if test -n "$x"; then +- SHARED_LIBADD="-L`pwd`/../libiberty/pic -liberty" ++ SHARED_LIBADD="`pwd`/../libiberty/pic/libiberty.a" + fi + + # More hacks to build DLLs on Windows. +diff --git a/binutils/configure b/binutils/configure +index 6cbf17c..6d20600 100755 +--- a/binutils/configure ++++ b/binutils/configure +@@ -658,8 +658,11 @@ OTOOL + LIPO + NMEDIT + DSYMUTIL ++MANIFEST_TOOL + RANLIB ++ac_ct_AR + AR ++DLLTOOL + OBJDUMP + LN_S + NM +@@ -771,6 +774,7 @@ enable_static + with_pic + enable_fast_install + with_gnu_ld ++with_libtool_sysroot + enable_libtool_lock + enable_plugins + enable_largefile +@@ -1443,6 +1447,8 @@ Optional Packages: + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] ++ --with-libtool-sysroot=DIR Search for dependent libraries within DIR ++ (or the compiler's sysroot if not specified). + --with-system-zlib use installed libz + --with-gnu-ld assume the C compiler uses GNU ld default=no + --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib +@@ -5159,8 +5165,8 @@ esac + + + +-macro_version='2.2.7a' +-macro_revision='1.3134' ++macro_version='2.4' ++macro_revision='1.3293' + + + +@@ -5200,7 +5206,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 + $as_echo_n "checking how to print strings... " >&6; } + # Test print first, because it will be a builtin if present. +-if test "X`print -r -- -n 2>/dev/null`" = X-n && \ ++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' + elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then +@@ -5886,8 +5892,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; + # Try some XSI features + xsi_shell=no + ( _lt_dummy="a/b/c" +- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ +- = c,a/b,, \ ++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +@@ -5936,6 +5942,80 @@ esac + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 ++$as_echo_n "checking how to convert $build file names to $host format... " >&6; } ++if test "${lt_cv_to_host_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ++ ;; ++ esac ++ ;; ++ *-*-cygwin* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ++ ;; ++ esac ++ ;; ++ * ) # unhandled hosts (and "normal" native builds) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++esac ++ ++fi ++ ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 ++$as_echo "$lt_cv_to_host_file_cmd" >&6; } ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 ++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } ++if test "${lt_cv_to_tool_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ #assume ordinary cross tools, or native build. ++lt_cv_to_tool_file_cmd=func_convert_file_noop ++case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ esac ++ ;; ++esac ++ ++fi ++ ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 ++$as_echo "$lt_cv_to_tool_file_cmd" >&6; } ++ ++ ++ ++ ++ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 + $as_echo_n "checking for $LD option to reload object files... " >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then : +@@ -5952,6 +6032,11 @@ case $reload_flag in + esac + reload_cmds='$LD$reload_flag -o $output$reload_objs' + case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ if test "$GCC" != yes; then ++ reload_cmds=false ++ fi ++ ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' +@@ -6120,7 +6205,8 @@ mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ # Keep this pattern in sync with the one in func_win32_libid. ++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; +@@ -6274,6 +6360,21 @@ esac + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 + $as_echo "$lt_cv_deplibs_check_method" >&6; } ++ ++file_magic_glob= ++want_nocaseglob=no ++if test "$build" = "$host"; then ++ case $host_os in ++ mingw* | pw32*) ++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then ++ want_nocaseglob=yes ++ else ++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/$..$/s\/[\1]\/[\1]\/g;/g"` ++ fi ++ ;; ++ esac ++fi ++ + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -6289,9 +6390,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$DLLTOOL"; then ++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++DLLTOOL=$ac_cv_prog_DLLTOOL ++if test -n "$DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 ++$as_echo "$DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DLLTOOL"; then ++ ac_ct_DLLTOOL=$DLLTOOL ++ # Extract the first word of "dlltool", so it can be a program name with args. ++set dummy dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_DLLTOOL"; then ++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DLLTOOL="dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL ++if test -n "$ac_ct_DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 ++$as_echo "$ac_ct_DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_DLLTOOL" = x; then ++ DLLTOOL="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ DLLTOOL=$ac_ct_DLLTOOL ++ fi ++else ++ DLLTOOL="$ac_cv_prog_DLLTOOL" ++fi ++ ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 ++$as_echo_n "checking how to associate runtime and link libraries... " >&6; } ++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_sharedlib_from_linklib_cmd='unknown' ++ ++case $host_os in ++cygwin* | mingw* | pw32* | cegcc*) ++ # two different shell functions defined in ltmain.sh ++ # decide which to use based on capabilities of $DLLTOOL ++ case `$DLLTOOL --help 2>&1` in ++ *--identify-strict*) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ++ ;; ++ *) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ++ ;; ++ esac ++ ;; ++*) ++ # fallback: assume linklib IS sharedlib ++ lt_cv_sharedlib_from_linklib_cmd="$ECHO" ++ ;; ++esac ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 ++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } ++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd ++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO ++ ++ ++ ++ ++ ++ ++ + if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ar; ac_word=$2 ++ for ac_prog in ar ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_AR+set}" = set; then : +@@ -6307,7 +6561,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_AR="${ac_tool_prefix}ar" ++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6327,11 +6581,15 @@ $as_echo "no" >&6; } + fi + + ++ test -n "$AR" && break ++ done + fi +-if test -z "$ac_cv_prog_AR"; then ++if test -z "$AR"; then + ac_ct_AR=$AR +- # Extract the first word of "ar", so it can be a program name with args. +-set dummy ar; ac_word=$2 ++ for ac_prog in ar ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : +@@ -6347,7 +6605,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_AR="ar" ++ ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6366,6 +6624,10 @@ else + $as_echo "no" >&6; } + fi + ++ ++ test -n "$ac_ct_AR" && break ++done ++ + if test "x$ac_ct_AR" = x; then + AR="false" + else +@@ -6377,12 +6639,10 @@ ac_tool_warned=yes ;; + esac + AR=$ac_ct_AR + fi +-else +- AR="$ac_cv_prog_AR" + fi + +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru ++: ${AR=ar} ++: ${AR_FLAGS=cru} + + + +@@ -6394,6 +6654,64 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 ++$as_echo_n "checking for archiver @FILE support... " >&6; } ++if test "${lt_cv_ar_at_file+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_ar_at_file=no ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ echo conftest.$ac_objext > conftest.lst ++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -eq 0; then ++ # Ensure the archiver fails upon bogus file names. ++ rm -f conftest.$ac_objext libconftest.a ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -ne 0; then ++ lt_cv_ar_at_file=@ ++ fi ++ fi ++ rm -f conftest.* libconftest.a ++ ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 ++$as_echo "$lt_cv_ar_at_file" >&6; } ++ ++if test "x$lt_cv_ar_at_file" = xno; then ++ archiver_list_spec= ++else ++ archiver_list_spec=$lt_cv_ar_at_file ++fi ++ ++ ++ ++ ++ ++ ++ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +@@ -6728,8 +7046,8 @@ esac + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" + + # Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" +-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" + + # Handle CRLF in mingw tool chain + opt_cr= +@@ -6765,6 +7083,7 @@ for ac_symprfx in "" "_"; do + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi ++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -6806,6 +7125,18 @@ _LT_EOF + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext ++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ ++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) ++/* DATA imports from DLLs on WIN32 con't be const, because runtime ++ relocations are performed -- see ld's documentation on pseudo-relocs. */ ++# define LT_DLSYM_CONST ++#elif defined(__osf__) ++/* This system does not cope well with relocations in const data. */ ++# define LT_DLSYM_CONST ++#else ++# define LT_DLSYM_CONST const ++#endif ++ + #ifdef __cplusplus + extern "C" { + #endif +@@ -6817,7 +7148,7 @@ _LT_EOF + cat <<_LT_EOF >> conftest.$ac_ext + + /* The mapping between symbol names and symbols. */ +-const struct { ++LT_DLSYM_CONST struct { + const char *name; + void *address; + } +@@ -6843,8 +7174,8 @@ static const void *lt_preloaded_setup() { + _LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" ++ lt_globsym_save_LIBS=$LIBS ++ lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 +@@ -6854,8 +7185,8 @@ _LT_EOF + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" ++ LIBS=$lt_globsym_save_LIBS ++ CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi +@@ -6892,6 +7223,21 @@ else + $as_echo "ok" >&6; } + fi + ++# Response file support. ++if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ nm_file_list_spec='@' ++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then ++ nm_file_list_spec='@' ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ + + + +@@ -6910,6 +7256,40 @@ fi + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 ++$as_echo_n "checking for sysroot... " >&6; } ++ ++# Check whether --with-libtool-sysroot was given. ++if test "${with_libtool_sysroot+set}" = set; then : ++ withval=$with_libtool_sysroot; ++else ++ with_libtool_sysroot=no ++fi ++ ++ ++lt_sysroot= ++case ${with_libtool_sysroot} in #( ++ yes) ++ if test "$GCC" = yes; then ++ lt_sysroot=`$CC --print-sysroot 2>/dev/null` ++ fi ++ ;; #( ++ /*) ++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"` ++ ;; #( ++ no|'') ++ ;; #( ++ *) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5 ++$as_echo "${with_libtool_sysroot}" >&6; } ++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5 ++ ;; ++esac ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 ++$as_echo "${lt_sysroot:-no}" >&6; } ++ ++ + + + +@@ -7119,6 +7499,123 @@ esac + + need_locks="$enable_libtool_lock" + ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. ++set dummy ${ac_tool_prefix}mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$MANIFEST_TOOL"; then ++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL ++if test -n "$MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 ++$as_echo "$MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL ++ # Extract the first word of "mt", so it can be a program name with args. ++set dummy mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_MANIFEST_TOOL"; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL ++if test -n "$ac_ct_MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 ++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_MANIFEST_TOOL" = x; then ++ MANIFEST_TOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL ++ fi ++else ++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" ++fi ++ ++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 ++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } ++if test "${lt_cv_path_mainfest_tool+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_path_mainfest_tool=no ++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 ++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out ++ cat conftest.err >&5 ++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then ++ lt_cv_path_mainfest_tool=yes ++ fi ++ rm -f conftest* ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 ++$as_echo "$lt_cv_path_mainfest_tool" >&6; } ++if test "x$lt_cv_path_mainfest_tool" != xyes; then ++ MANIFEST_TOOL=: ++fi ++ ++ ++ ++ ++ + + case $host_os in + rhapsody* | darwin*) +@@ -7682,6 +8179,8 @@ _LT_EOF + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 ++ echo "$RANLIB libconftest.a" >&5 ++ $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF + int main() { return 0;} + _LT_EOF +@@ -7877,7 +8376,8 @@ fi + LIBTOOL_DEPS="$ltmain" + + # Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++LIBTOOL='$(SHELL) $(top_builddir)' ++LIBTOOL="$LIBTOOL/${host_alias}-libtool" + + + +@@ -7966,7 +8466,7 @@ aix3*) + esac + + # Global variables: +-ofile=libtool ++ofile=${host_alias}-libtool + can_build_shared=yes + + # All known linkers require a `.a' archive for static linking (except MSVC, +@@ -8264,8 +8764,6 @@ fi + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -8431,6 +8929,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; ++ nagfor*) ++ # NAG Fortran compiler ++ lt_prog_compiler_wl='-Wl,-Wl,,' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) +@@ -8493,7 +8997,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in +- f77* | f90* | f95*) ++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; +@@ -8550,13 +9054,17 @@ case $host_os in + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; + esac +-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 +-$as_echo "$lt_prog_compiler_pic" >&6; } +- +- +- +- + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 ++$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++if test "${lt_cv_prog_compiler_pic+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 ++$as_echo "$lt_cv_prog_compiler_pic" >&6; } ++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + + # + # Check to make sure the PIC flag actually works. +@@ -8617,6 +9125,11 @@ fi + + + ++ ++ ++ ++ ++ + # + # Check to make sure the static flag actually works. + # +@@ -8967,7 +9480,8 @@ _LT_EOF + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' ++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +@@ -9066,12 +9580,12 @@ _LT_EOF + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' +- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ +- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac +@@ -9085,8 +9599,8 @@ _LT_EOF + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + +@@ -9104,8 +9618,8 @@ _LT_EOF + + _LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -9151,8 +9665,8 @@ _LT_EOF + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -9282,7 +9796,13 @@ _LT_EOF + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9295,22 +9815,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +@@ -9322,7 +9849,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + else + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9335,22 +9868,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, +@@ -9395,20 +9935,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_from_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes=yes ++ case $cc_basename in ++ cl*) ++ # Native MSVC ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ file_list_spec='@' ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ sed -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; ++ else ++ sed -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; ++ fi~ ++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ ++ linknames=' ++ # The linker will not automatically build a static lib if we build a DLL. ++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true' ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ # Don't use ranlib ++ old_postinstall_cmds='chmod 644 $oldlib' ++ postlink_cmds='lt_outputfile="@OUTPUT@"~ ++ lt_tool_outputfile="@TOOL_OUTPUT@"~ ++ case $lt_outputfile in ++ *.exe|*.EXE) ;; ++ *) ++ lt_outputfile="$lt_outputfile.exe" ++ lt_tool_outputfile="$lt_tool_outputfile.exe" ++ ;; ++ esac~ ++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then ++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; ++ $RM "$lt_outputfile.manifest"; ++ fi' ++ ;; ++ *) ++ # Assume MSVC wrapper ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ esac + ;; + + darwin* | rhapsody*) +@@ -9469,7 +10052,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no +@@ -9477,7 +10060,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux9*) + if test "$GCC" = yes; then +- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi +@@ -9493,7 +10076,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi +@@ -9517,10 +10100,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +@@ -9599,23 +10182,36 @@ fi + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ # This should be the same for all languages, so no per-tag cache variable. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 ++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } ++if test "${lt_cv_irix_exported_symbol+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-int foo(void) {} ++int foo (void) { return 0; } + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' +- ++ lt_cv_irix_exported_symbol=yes ++else ++ lt_cv_irix_exported_symbol=no + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +- LDFLAGS="$save_LDFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 ++$as_echo "$lt_cv_irix_exported_symbol" >&6; } ++ if test "$lt_cv_irix_exported_symbol" = yes; then ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' +@@ -9700,7 +10296,7 @@ rm -f core conftest.err conftest.$ac_objext \ + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' +@@ -9719,9 +10315,9 @@ rm -f core conftest.err conftest.$ac_objext \ + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' +- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) +@@ -10297,8 +10893,9 @@ cygwin* | mingw* | pw32* | cegcc*) + need_version=no + need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ case $GCC,$cc_basename in ++ yes,*) ++ # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +@@ -10331,13 +10928,71 @@ cygwin* | mingw* | pw32* | cegcc*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac ++ dynamic_linker='Win32 ld.exe' ++ ;; ++ ++ *,cl*) ++ # Native MSVC ++ libname_spec='$name' ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='${libname}.dll.lib' ++ ++ case $build_os in ++ mingw*) ++ sys_lib_search_path_spec= ++ lt_save_ifs=$IFS ++ IFS=';' ++ for lt_path in $LIB ++ do ++ IFS=$lt_save_ifs ++ # Let DOS variable expansion print the short 8.3 style file name. ++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` ++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" ++ done ++ IFS=$lt_save_ifs ++ # Convert to MSYS style. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \$[a-zA-Z]\$:| /\\1|g' -e 's|^ ||'` ++ ;; ++ cygwin*) ++ # Convert to unix form, then to dos form, then back to unix form ++ # but this time dos style (no spaces!) so that the unix form looks ++ # like /cygdrive/c/PROGRA~1:/cygdr... ++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` ++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` ++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ ;; ++ *) ++ sys_lib_search_path_spec="$LIB" ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # FIXME: find the short name or the path components, as spaces are ++ # common. (e.g. "Program Files" -> "PROGRA~1") ++ ;; ++ esac ++ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ dynamic_linker='Win32 link.exe' + ;; + + *) ++ # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ dynamic_linker='Win32 ld.exe' + ;; + esac +- dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +@@ -10429,7 +11084,7 @@ haiku*) + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes +- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib' ++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +@@ -11269,10 +11924,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -11375,10 +12030,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -15392,13 +16047,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' + lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' + lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' + lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' + reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' + reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' + OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' + deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' + file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' ++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' ++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' ++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' ++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' + AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' + AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' ++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' + STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' + RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' + old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +@@ -15413,14 +16075,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de + lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' ++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' ++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' + objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' + MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' + lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' + need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' ++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' + DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' + NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' + LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +@@ -15453,12 +16118,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q + hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' + inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' + link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`' + always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' + export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' + exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' + include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' + prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' ++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' + file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' + variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' + need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +@@ -15513,8 +16178,13 @@ reload_flag \ + OBJDUMP \ + deplibs_check_method \ + file_magic_cmd \ ++file_magic_glob \ ++want_nocaseglob \ ++DLLTOOL \ ++sharedlib_from_linklib_cmd \ + AR \ + AR_FLAGS \ ++archiver_list_spec \ + STRIP \ + RANLIB \ + CC \ +@@ -15524,12 +16194,14 @@ lt_cv_sys_global_symbol_pipe \ + lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++nm_file_list_spec \ + lt_prog_compiler_no_builtin_flag \ +-lt_prog_compiler_wl \ + lt_prog_compiler_pic \ ++lt_prog_compiler_wl \ + lt_prog_compiler_static \ + lt_cv_prog_compiler_c_o \ + need_locks \ ++MANIFEST_TOOL \ + DSYMUTIL \ + NMEDIT \ + LIPO \ +@@ -15545,7 +16217,6 @@ no_undefined_flag \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ +-fix_srcfile_path \ + exclude_expsyms \ + include_expsyms \ + file_list_spec \ +@@ -15581,6 +16252,7 @@ module_cmds \ + module_expsym_cmds \ + export_symbols_cmds \ + prelink_cmds \ ++postlink_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + finish_cmds \ +@@ -16338,7 +17010,8 @@ $as_echo X"$file" | + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, ++# Inc. + # Written by Gordon Matzigkeit, 1996 + # + # This file is part of GNU Libtool. +@@ -16441,19 +17114,42 @@ SP2NL=$lt_lt_SP2NL + # turn newlines into spaces. + NL2SP=$lt_lt_NL2SP + ++# convert \$build file names to \$host format. ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++ ++# convert \$build files to toolchain format. ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++ + # An object symbol dumper. + OBJDUMP=$lt_OBJDUMP + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + +-# Command to use when deplibs_check_method == "file_magic". ++# Command to use when deplibs_check_method = "file_magic". + file_magic_cmd=$lt_file_magic_cmd + ++# How to find potential files when deplibs_check_method = "file_magic". ++file_magic_glob=$lt_file_magic_glob ++ ++# Find potential files using nocaseglob when deplibs_check_method = "file_magic". ++want_nocaseglob=$lt_want_nocaseglob ++ ++# DLL creation program. ++DLLTOOL=$lt_DLLTOOL ++ ++# Command to associate shared and link libraries. ++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd ++ + # The archiver. + AR=$lt_AR ++ ++# Flags to create an archive. + AR_FLAGS=$lt_AR_FLAGS + ++# How to feed a file listing to the archiver. ++archiver_list_spec=$lt_archiver_list_spec ++ + # A symbol stripping program. + STRIP=$lt_STRIP + +@@ -16483,6 +17179,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + # Transform the output of nm in a C name address pair when lib prefix is needed. + global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + ++# Specify filename containing input files for \$NM. ++nm_file_list_spec=$lt_nm_file_list_spec ++ ++# The root where to search for dependent libraries,and in which our libraries should be installed. ++lt_sysroot=$lt_sysroot ++ + # The name of the directory that contains temporary libtool files. + objdir=$objdir + +@@ -16492,6 +17194,9 @@ MAGIC_CMD=$MAGIC_CMD + # Must we lock files when doing compilation? + need_locks=$lt_need_locks + ++# Manifest tool. ++MANIFEST_TOOL=$lt_MANIFEST_TOOL ++ + # Tool to manipulate archived DWARF debug symbol files on Mac OS X. + DSYMUTIL=$lt_DSYMUTIL + +@@ -16606,12 +17311,12 @@ with_gcc=$GCC + # Compiler flag to turn off builtin functions. + no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl +- + # Additional compiler flags for building library objects. + pic_flag=$lt_lt_prog_compiler_pic + ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ + # Compiler flag to prevent dynamic linking. + link_static_flag=$lt_lt_prog_compiler_static + +@@ -16698,9 +17403,6 @@ inherit_rpath=$inherit_rpath + # Whether libtool must link a program against all its dependency libraries. + link_all_deplibs=$link_all_deplibs + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- + # Set to "yes" if exported symbols are required. + always_export_symbols=$always_export_symbols + +@@ -16716,6 +17418,9 @@ include_expsyms=$lt_include_expsyms + # Commands necessary for linking programs (against libraries) with templates. + prelink_cmds=$lt_prelink_cmds + ++# Commands necessary for finishing linking programs. ++postlink_cmds=$lt_postlink_cmds ++ + # Specify filename containing input files. + file_list_spec=$lt_file_list_spec + +@@ -16748,210 +17453,169 @@ ltmain="$ac_aux_dir/ltmain.sh" + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? +- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- case $xsi_shell in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result="${1##*/}" +-} +- +-# func_dirname_and_basename file append nondir_replacement +-# perform func_basename and func_dirname in a single function +-# call: +-# dirname: Compute the dirname of FILE. If nonempty, +-# add APPEND to the result, otherwise set result +-# to NONDIR_REPLACEMENT. +-# value returned in "$func_dirname_result" +-# basename: Compute filename of FILE. +-# value retuned in "$func_basename_result" +-# Implementation must be kept synchronized with func_dirname +-# and func_basename. For efficiency, we do not delegate to +-# those functions but instead duplicate the functionality here. +-func_dirname_and_basename () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +- func_basename_result="${1##*/}" +-} +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-func_stripname () +-{ +- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are +- # positional parameters, so assign one to ordinary parameter first. +- func_stripname_result=${3} +- func_stripname_result=${func_stripname_result#"${1}"} +- func_stripname_result=${func_stripname_result%"${2}"} +-} +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=${1%%=*} +- func_opt_split_arg=${1#*=} +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- case ${1} in +- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; +- *) func_lo2o_result=${1} ;; +- esac +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=${1%.*}.lo +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=$(( $* )) +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=${#1} +-} +- +-_LT_EOF +- ;; +- *) # Bourne compatible functions. +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- # Extract subdirectory from the argument. +- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` +- if test "X$func_dirname_result" = "X${1}"; then +- func_dirname_result="${3}" +- else +- func_dirname_result="$func_dirname_result${2}" +- fi +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result=`$ECHO "${1}" | $SED "$basename"` +-} +- +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-# func_strip_suffix prefix name +-func_stripname () +-{ +- case ${2} in +- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; +- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; +- esac +-} +- +-# sed scripts: +-my_sed_long_opt='1s/^$-[^=]*$=.*/\1/;q' +-my_sed_long_arg='1s/^-[^=]*=//' +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` +- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=`expr "$@"` +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +-} +- +-_LT_EOF +-esac +- +-case $lt_shell_append in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1+=\$2" +-} +-_LT_EOF +- ;; +- *) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1=\$$1\$2" +-} +- +-_LT_EOF +- ;; +- esac +- +- +- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || ++ sed '$q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ if test x"$xsi_shell" = xyes; then ++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ ++func_dirname ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_basename ()$/,/^} # func_basename /c\ ++func_basename ()\ ++{\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ ++func_dirname_and_basename ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ ++func_stripname ()\ ++{\ ++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ ++\ # positional parameters, so assign one to ordinary parameter first.\ ++\ func_stripname_result=${3}\ ++\ func_stripname_result=${func_stripname_result#"${1}"}\ ++\ func_stripname_result=${func_stripname_result%"${2}"}\ ++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ ++func_split_long_opt ()\ ++{\ ++\ func_split_long_opt_name=${1%%=*}\ ++\ func_split_long_opt_arg=${1#*=}\ ++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ ++func_split_short_opt ()\ ++{\ ++\ func_split_short_opt_arg=${1#??}\ ++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ ++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ ++func_lo2o ()\ ++{\ ++\ case ${1} in\ ++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ ++\ *) func_lo2o_result=${1} ;;\ ++\ esac\ ++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_xform ()$/,/^} # func_xform /c\ ++func_xform ()\ ++{\ ++ func_xform_result=${1%.*}.lo\ ++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_arith ()$/,/^} # func_arith /c\ ++func_arith ()\ ++{\ ++ func_arith_result=$(( $* ))\ ++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_len ()$/,/^} # func_len /c\ ++func_len ()\ ++{\ ++ func_len_result=${#1}\ ++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++fi ++ ++if test x"$lt_shell_append" = xyes; then ++ sed -e '/^func_append ()$/,/^} # func_append /c\ ++func_append ()\ ++{\ ++ eval "${1}+=\\${2}"\ ++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ ++func_append_quoted ()\ ++{\ ++\ func_quote_for_eval "${2}"\ ++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ ++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ # Save a `func_append' function call where possible by direct use of '+=' ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1+="%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++else ++ # Save a `func_append' function call even when '+=' is not available ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++fi ++ ++if test x"$_lt_function_replace_fail" = x":"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 ++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} ++fi ++ ++ ++ mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +diff --git a/configure b/configure +index 2a74a77..ad3dfb7 100755 +--- a/configure ++++ b/configure +@@ -3444,7 +3444,7 @@ case "${target}" in + ;; + s390-*-* | s390x-*-*) + ;; +- sh*-*-* | sh[34]*-*-*) ++ sh-*-* | sh[34]*-*-*) + ;; + sh64-*-* | sh5*-*-*) + ;; +@@ -3946,7 +3946,7 @@ case "${target}" in + or1k*-*-*) + noconfigdirs="$noconfigdirs gdb" + ;; +- sh*-*-* | sh64-*-*) ++ sh-*-* | sh64-*-*) + case "${target}" in + sh*-*-elf) + ;; +diff --git a/gas/configure b/gas/configure +index f7753b8..45da030 100755 +--- a/gas/configure ++++ b/gas/configure +@@ -648,8 +648,11 @@ OTOOL + LIPO + NMEDIT + DSYMUTIL ++MANIFEST_TOOL + RANLIB ++ac_ct_AR + AR ++DLLTOOL + OBJDUMP + LN_S + NM +@@ -761,6 +764,7 @@ enable_static + with_pic + enable_fast_install + with_gnu_ld ++with_libtool_sysroot + enable_libtool_lock + enable_plugins + enable_largefile +@@ -4919,8 +4923,8 @@ esac + + + +-macro_version='2.2.7a' +-macro_revision='1.3134' ++macro_version='2.4' ++macro_revision='1.3293' + + + +@@ -4960,7 +4964,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 + $as_echo_n "checking how to print strings... " >&6; } + # Test print first, because it will be a builtin if present. +-if test "X`print -r -- -n 2>/dev/null`" = X-n && \ ++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' + elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then +@@ -5646,8 +5650,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; + # Try some XSI features + xsi_shell=no + ( _lt_dummy="a/b/c" +- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ +- = c,a/b,, \ ++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +@@ -5696,6 +5700,80 @@ esac + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 ++$as_echo_n "checking how to convert $build file names to $host format... " >&6; } ++if test "${lt_cv_to_host_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ++ ;; ++ esac ++ ;; ++ *-*-cygwin* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ++ ;; ++ esac ++ ;; ++ * ) # unhandled hosts (and "normal" native builds) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++esac ++ ++fi ++ ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 ++$as_echo "$lt_cv_to_host_file_cmd" >&6; } ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 ++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } ++if test "${lt_cv_to_tool_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ #assume ordinary cross tools, or native build. ++lt_cv_to_tool_file_cmd=func_convert_file_noop ++case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ esac ++ ;; ++esac ++ ++fi ++ ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 ++$as_echo "$lt_cv_to_tool_file_cmd" >&6; } ++ ++ ++ ++ ++ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 + $as_echo_n "checking for $LD option to reload object files... " >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then : +@@ -5712,6 +5790,11 @@ case $reload_flag in + esac + reload_cmds='$LD$reload_flag -o $output$reload_objs' + case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ if test "$GCC" != yes; then ++ reload_cmds=false ++ fi ++ ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' +@@ -5880,7 +5963,8 @@ mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ # Keep this pattern in sync with the one in func_win32_libid. ++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; +@@ -6034,6 +6118,21 @@ esac + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 + $as_echo "$lt_cv_deplibs_check_method" >&6; } ++ ++file_magic_glob= ++want_nocaseglob=no ++if test "$build" = "$host"; then ++ case $host_os in ++ mingw* | pw32*) ++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then ++ want_nocaseglob=yes ++ else ++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/$..$/s\/[\1]\/[\1]\/g;/g"` ++ fi ++ ;; ++ esac ++fi ++ + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -6049,9 +6148,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$DLLTOOL"; then ++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++DLLTOOL=$ac_cv_prog_DLLTOOL ++if test -n "$DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 ++$as_echo "$DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DLLTOOL"; then ++ ac_ct_DLLTOOL=$DLLTOOL ++ # Extract the first word of "dlltool", so it can be a program name with args. ++set dummy dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_DLLTOOL"; then ++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DLLTOOL="dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL ++if test -n "$ac_ct_DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 ++$as_echo "$ac_ct_DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_DLLTOOL" = x; then ++ DLLTOOL="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ DLLTOOL=$ac_ct_DLLTOOL ++ fi ++else ++ DLLTOOL="$ac_cv_prog_DLLTOOL" ++fi ++ ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 ++$as_echo_n "checking how to associate runtime and link libraries... " >&6; } ++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_sharedlib_from_linklib_cmd='unknown' ++ ++case $host_os in ++cygwin* | mingw* | pw32* | cegcc*) ++ # two different shell functions defined in ltmain.sh ++ # decide which to use based on capabilities of $DLLTOOL ++ case `$DLLTOOL --help 2>&1` in ++ *--identify-strict*) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ++ ;; ++ *) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ++ ;; ++ esac ++ ;; ++*) ++ # fallback: assume linklib IS sharedlib ++ lt_cv_sharedlib_from_linklib_cmd="$ECHO" ++ ;; ++esac ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 ++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } ++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd ++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO ++ ++ ++ ++ ++ ++ ++ + if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ar; ac_word=$2 ++ for ac_prog in ar ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_AR+set}" = set; then : +@@ -6067,7 +6319,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_AR="${ac_tool_prefix}ar" ++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6087,11 +6339,15 @@ $as_echo "no" >&6; } + fi + + ++ test -n "$AR" && break ++ done + fi +-if test -z "$ac_cv_prog_AR"; then ++if test -z "$AR"; then + ac_ct_AR=$AR +- # Extract the first word of "ar", so it can be a program name with args. +-set dummy ar; ac_word=$2 ++ for ac_prog in ar ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : +@@ -6107,7 +6363,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_AR="ar" ++ ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6126,6 +6382,10 @@ else + $as_echo "no" >&6; } + fi + ++ ++ test -n "$ac_ct_AR" && break ++done ++ + if test "x$ac_ct_AR" = x; then + AR="false" + else +@@ -6137,12 +6397,10 @@ ac_tool_warned=yes ;; + esac + AR=$ac_ct_AR + fi +-else +- AR="$ac_cv_prog_AR" + fi + +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru ++: ${AR=ar} ++: ${AR_FLAGS=cru} + + + +@@ -6154,6 +6412,64 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 ++$as_echo_n "checking for archiver @FILE support... " >&6; } ++if test "${lt_cv_ar_at_file+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_ar_at_file=no ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ echo conftest.$ac_objext > conftest.lst ++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -eq 0; then ++ # Ensure the archiver fails upon bogus file names. ++ rm -f conftest.$ac_objext libconftest.a ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -ne 0; then ++ lt_cv_ar_at_file=@ ++ fi ++ fi ++ rm -f conftest.* libconftest.a ++ ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 ++$as_echo "$lt_cv_ar_at_file" >&6; } ++ ++if test "x$lt_cv_ar_at_file" = xno; then ++ archiver_list_spec= ++else ++ archiver_list_spec=$lt_cv_ar_at_file ++fi ++ ++ ++ ++ ++ ++ ++ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +@@ -6488,8 +6804,8 @@ esac + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" + + # Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" +-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" + + # Handle CRLF in mingw tool chain + opt_cr= +@@ -6525,6 +6841,7 @@ for ac_symprfx in "" "_"; do + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi ++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -6566,6 +6883,18 @@ _LT_EOF + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext ++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ ++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) ++/* DATA imports from DLLs on WIN32 con't be const, because runtime ++ relocations are performed -- see ld's documentation on pseudo-relocs. */ ++# define LT_DLSYM_CONST ++#elif defined(__osf__) ++/* This system does not cope well with relocations in const data. */ ++# define LT_DLSYM_CONST ++#else ++# define LT_DLSYM_CONST const ++#endif ++ + #ifdef __cplusplus + extern "C" { + #endif +@@ -6577,7 +6906,7 @@ _LT_EOF + cat <<_LT_EOF >> conftest.$ac_ext + + /* The mapping between symbol names and symbols. */ +-const struct { ++LT_DLSYM_CONST struct { + const char *name; + void *address; + } +@@ -6603,8 +6932,8 @@ static const void *lt_preloaded_setup() { + _LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" ++ lt_globsym_save_LIBS=$LIBS ++ lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 +@@ -6614,8 +6943,8 @@ _LT_EOF + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" ++ LIBS=$lt_globsym_save_LIBS ++ CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi +@@ -6652,6 +6981,21 @@ else + $as_echo "ok" >&6; } + fi + ++# Response file support. ++if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ nm_file_list_spec='@' ++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then ++ nm_file_list_spec='@' ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ + + + +@@ -6670,6 +7014,40 @@ fi + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 ++$as_echo_n "checking for sysroot... " >&6; } ++ ++# Check whether --with-libtool-sysroot was given. ++if test "${with_libtool_sysroot+set}" = set; then : ++ withval=$with_libtool_sysroot; ++else ++ with_libtool_sysroot=no ++fi ++ ++ ++lt_sysroot= ++case ${with_libtool_sysroot} in #( ++ yes) ++ if test "$GCC" = yes; then ++ lt_sysroot=`$CC --print-sysroot 2>/dev/null` ++ fi ++ ;; #( ++ /*) ++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"` ++ ;; #( ++ no|'') ++ ;; #( ++ *) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5 ++$as_echo "${with_libtool_sysroot}" >&6; } ++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5 ++ ;; ++esac ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 ++$as_echo "${lt_sysroot:-no}" >&6; } ++ ++ + + + +@@ -6879,6 +7257,123 @@ esac + + need_locks="$enable_libtool_lock" + ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. ++set dummy ${ac_tool_prefix}mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$MANIFEST_TOOL"; then ++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL ++if test -n "$MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 ++$as_echo "$MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL ++ # Extract the first word of "mt", so it can be a program name with args. ++set dummy mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_MANIFEST_TOOL"; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL ++if test -n "$ac_ct_MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 ++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_MANIFEST_TOOL" = x; then ++ MANIFEST_TOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL ++ fi ++else ++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" ++fi ++ ++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 ++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } ++if test "${lt_cv_path_mainfest_tool+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_path_mainfest_tool=no ++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 ++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out ++ cat conftest.err >&5 ++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then ++ lt_cv_path_mainfest_tool=yes ++ fi ++ rm -f conftest* ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 ++$as_echo "$lt_cv_path_mainfest_tool" >&6; } ++if test "x$lt_cv_path_mainfest_tool" != xyes; then ++ MANIFEST_TOOL=: ++fi ++ ++ ++ ++ ++ + + case $host_os in + rhapsody* | darwin*) +@@ -7442,6 +7937,8 @@ _LT_EOF + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 ++ echo "$RANLIB libconftest.a" >&5 ++ $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF + int main() { return 0;} + _LT_EOF +@@ -7637,7 +8134,8 @@ fi + LIBTOOL_DEPS="$ltmain" + + # Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++LIBTOOL='$(SHELL) $(top_builddir)' ++LIBTOOL="$LIBTOOL/${host_alias}-libtool" + + + +@@ -7726,7 +8224,7 @@ aix3*) + esac + + # Global variables: +-ofile=libtool ++ofile=${host_alias}-libtool + can_build_shared=yes + + # All known linkers require a `.a' archive for static linking (except MSVC, +@@ -8024,8 +8522,6 @@ fi + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -8191,6 +8687,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; ++ nagfor*) ++ # NAG Fortran compiler ++ lt_prog_compiler_wl='-Wl,-Wl,,' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) +@@ -8253,7 +8755,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in +- f77* | f90* | f95*) ++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; +@@ -8310,13 +8812,17 @@ case $host_os in + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; + esac +-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 +-$as_echo "$lt_prog_compiler_pic" >&6; } +- +- +- +- + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 ++$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++if test "${lt_cv_prog_compiler_pic+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 ++$as_echo "$lt_cv_prog_compiler_pic" >&6; } ++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + + # + # Check to make sure the PIC flag actually works. +@@ -8377,6 +8883,11 @@ fi + + + ++ ++ ++ ++ ++ + # + # Check to make sure the static flag actually works. + # +@@ -8727,7 +9238,8 @@ _LT_EOF + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' ++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +@@ -8826,12 +9338,12 @@ _LT_EOF + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' +- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ +- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac +@@ -8845,8 +9357,8 @@ _LT_EOF + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + +@@ -8864,8 +9376,8 @@ _LT_EOF + + _LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -8911,8 +9423,8 @@ _LT_EOF + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -9042,7 +9554,13 @@ _LT_EOF + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9055,22 +9573,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +@@ -9082,7 +9607,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + else + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9095,22 +9626,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, +@@ -9155,20 +9693,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_from_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes=yes ++ case $cc_basename in ++ cl*) ++ # Native MSVC ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ file_list_spec='@' ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ sed -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; ++ else ++ sed -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; ++ fi~ ++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ ++ linknames=' ++ # The linker will not automatically build a static lib if we build a DLL. ++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true' ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ # Don't use ranlib ++ old_postinstall_cmds='chmod 644 $oldlib' ++ postlink_cmds='lt_outputfile="@OUTPUT@"~ ++ lt_tool_outputfile="@TOOL_OUTPUT@"~ ++ case $lt_outputfile in ++ *.exe|*.EXE) ;; ++ *) ++ lt_outputfile="$lt_outputfile.exe" ++ lt_tool_outputfile="$lt_tool_outputfile.exe" ++ ;; ++ esac~ ++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then ++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; ++ $RM "$lt_outputfile.manifest"; ++ fi' ++ ;; ++ *) ++ # Assume MSVC wrapper ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ esac + ;; + + darwin* | rhapsody*) +@@ -9229,7 +9810,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no +@@ -9237,7 +9818,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux9*) + if test "$GCC" = yes; then +- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi +@@ -9253,7 +9834,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi +@@ -9277,10 +9858,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +@@ -9359,23 +9940,36 @@ fi + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ # This should be the same for all languages, so no per-tag cache variable. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 ++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } ++if test "${lt_cv_irix_exported_symbol+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-int foo(void) {} ++int foo (void) { return 0; } + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' +- ++ lt_cv_irix_exported_symbol=yes ++else ++ lt_cv_irix_exported_symbol=no + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +- LDFLAGS="$save_LDFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 ++$as_echo "$lt_cv_irix_exported_symbol" >&6; } ++ if test "$lt_cv_irix_exported_symbol" = yes; then ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' +@@ -9460,7 +10054,7 @@ rm -f core conftest.err conftest.$ac_objext \ + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' +@@ -9479,9 +10073,9 @@ rm -f core conftest.err conftest.$ac_objext \ + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' +- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) +@@ -10057,8 +10651,9 @@ cygwin* | mingw* | pw32* | cegcc*) + need_version=no + need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ case $GCC,$cc_basename in ++ yes,*) ++ # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +@@ -10091,13 +10686,71 @@ cygwin* | mingw* | pw32* | cegcc*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac ++ dynamic_linker='Win32 ld.exe' ++ ;; ++ ++ *,cl*) ++ # Native MSVC ++ libname_spec='$name' ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='${libname}.dll.lib' ++ ++ case $build_os in ++ mingw*) ++ sys_lib_search_path_spec= ++ lt_save_ifs=$IFS ++ IFS=';' ++ for lt_path in $LIB ++ do ++ IFS=$lt_save_ifs ++ # Let DOS variable expansion print the short 8.3 style file name. ++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` ++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" ++ done ++ IFS=$lt_save_ifs ++ # Convert to MSYS style. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \$[a-zA-Z]\$:| /\\1|g' -e 's|^ ||'` ++ ;; ++ cygwin*) ++ # Convert to unix form, then to dos form, then back to unix form ++ # but this time dos style (no spaces!) so that the unix form looks ++ # like /cygdrive/c/PROGRA~1:/cygdr... ++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` ++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` ++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ ;; ++ *) ++ sys_lib_search_path_spec="$LIB" ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # FIXME: find the short name or the path components, as spaces are ++ # common. (e.g. "Program Files" -> "PROGRA~1") ++ ;; ++ esac ++ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ dynamic_linker='Win32 link.exe' + ;; + + *) ++ # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ dynamic_linker='Win32 ld.exe' + ;; + esac +- dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +@@ -10189,7 +10842,7 @@ haiku*) + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes +- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib' ++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +@@ -11029,10 +11682,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -11135,10 +11788,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -15350,13 +16003,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' + lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' + lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' + lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' + reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' + reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' + OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' + deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' + file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' ++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' ++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' ++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' ++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' + AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' + AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' ++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' + STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' + RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' + old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +@@ -15371,14 +16031,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de + lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' ++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' ++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' + objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' + MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' + lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' + need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' ++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' + DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' + NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' + LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +@@ -15411,12 +16074,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q + hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' + inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' + link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`' + always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' + export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' + exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' + include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' + prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' ++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' + file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' + variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' + need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +@@ -15471,8 +16134,13 @@ reload_flag \ + OBJDUMP \ + deplibs_check_method \ + file_magic_cmd \ ++file_magic_glob \ ++want_nocaseglob \ ++DLLTOOL \ ++sharedlib_from_linklib_cmd \ + AR \ + AR_FLAGS \ ++archiver_list_spec \ + STRIP \ + RANLIB \ + CC \ +@@ -15482,12 +16150,14 @@ lt_cv_sys_global_symbol_pipe \ + lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++nm_file_list_spec \ + lt_prog_compiler_no_builtin_flag \ +-lt_prog_compiler_wl \ + lt_prog_compiler_pic \ ++lt_prog_compiler_wl \ + lt_prog_compiler_static \ + lt_cv_prog_compiler_c_o \ + need_locks \ ++MANIFEST_TOOL \ + DSYMUTIL \ + NMEDIT \ + LIPO \ +@@ -15503,7 +16173,6 @@ no_undefined_flag \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ +-fix_srcfile_path \ + exclude_expsyms \ + include_expsyms \ + file_list_spec \ +@@ -15539,6 +16208,7 @@ module_cmds \ + module_expsym_cmds \ + export_symbols_cmds \ + prelink_cmds \ ++postlink_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + finish_cmds \ +@@ -16303,7 +16973,8 @@ $as_echo X"$file" | + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, ++# Inc. + # Written by Gordon Matzigkeit, 1996 + # + # This file is part of GNU Libtool. +@@ -16406,19 +17077,42 @@ SP2NL=$lt_lt_SP2NL + # turn newlines into spaces. + NL2SP=$lt_lt_NL2SP + ++# convert \$build file names to \$host format. ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++ ++# convert \$build files to toolchain format. ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++ + # An object symbol dumper. + OBJDUMP=$lt_OBJDUMP + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + +-# Command to use when deplibs_check_method == "file_magic". ++# Command to use when deplibs_check_method = "file_magic". + file_magic_cmd=$lt_file_magic_cmd + ++# How to find potential files when deplibs_check_method = "file_magic". ++file_magic_glob=$lt_file_magic_glob ++ ++# Find potential files using nocaseglob when deplibs_check_method = "file_magic". ++want_nocaseglob=$lt_want_nocaseglob ++ ++# DLL creation program. ++DLLTOOL=$lt_DLLTOOL ++ ++# Command to associate shared and link libraries. ++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd ++ + # The archiver. + AR=$lt_AR ++ ++# Flags to create an archive. + AR_FLAGS=$lt_AR_FLAGS + ++# How to feed a file listing to the archiver. ++archiver_list_spec=$lt_archiver_list_spec ++ + # A symbol stripping program. + STRIP=$lt_STRIP + +@@ -16448,6 +17142,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + # Transform the output of nm in a C name address pair when lib prefix is needed. + global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + ++# Specify filename containing input files for \$NM. ++nm_file_list_spec=$lt_nm_file_list_spec ++ ++# The root where to search for dependent libraries,and in which our libraries should be installed. ++lt_sysroot=$lt_sysroot ++ + # The name of the directory that contains temporary libtool files. + objdir=$objdir + +@@ -16457,6 +17157,9 @@ MAGIC_CMD=$MAGIC_CMD + # Must we lock files when doing compilation? + need_locks=$lt_need_locks + ++# Manifest tool. ++MANIFEST_TOOL=$lt_MANIFEST_TOOL ++ + # Tool to manipulate archived DWARF debug symbol files on Mac OS X. + DSYMUTIL=$lt_DSYMUTIL + +@@ -16571,12 +17274,12 @@ with_gcc=$GCC + # Compiler flag to turn off builtin functions. + no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl +- + # Additional compiler flags for building library objects. + pic_flag=$lt_lt_prog_compiler_pic + ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ + # Compiler flag to prevent dynamic linking. + link_static_flag=$lt_lt_prog_compiler_static + +@@ -16663,9 +17366,6 @@ inherit_rpath=$inherit_rpath + # Whether libtool must link a program against all its dependency libraries. + link_all_deplibs=$link_all_deplibs + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- + # Set to "yes" if exported symbols are required. + always_export_symbols=$always_export_symbols + +@@ -16681,6 +17381,9 @@ include_expsyms=$lt_include_expsyms + # Commands necessary for linking programs (against libraries) with templates. + prelink_cmds=$lt_prelink_cmds + ++# Commands necessary for finishing linking programs. ++postlink_cmds=$lt_postlink_cmds ++ + # Specify filename containing input files. + file_list_spec=$lt_file_list_spec + +@@ -16713,210 +17416,169 @@ ltmain="$ac_aux_dir/ltmain.sh" + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? +- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- case $xsi_shell in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result="${1##*/}" +-} +- +-# func_dirname_and_basename file append nondir_replacement +-# perform func_basename and func_dirname in a single function +-# call: +-# dirname: Compute the dirname of FILE. If nonempty, +-# add APPEND to the result, otherwise set result +-# to NONDIR_REPLACEMENT. +-# value returned in "$func_dirname_result" +-# basename: Compute filename of FILE. +-# value retuned in "$func_basename_result" +-# Implementation must be kept synchronized with func_dirname +-# and func_basename. For efficiency, we do not delegate to +-# those functions but instead duplicate the functionality here. +-func_dirname_and_basename () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +- func_basename_result="${1##*/}" +-} +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-func_stripname () +-{ +- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are +- # positional parameters, so assign one to ordinary parameter first. +- func_stripname_result=${3} +- func_stripname_result=${func_stripname_result#"${1}"} +- func_stripname_result=${func_stripname_result%"${2}"} +-} +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=${1%%=*} +- func_opt_split_arg=${1#*=} +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- case ${1} in +- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; +- *) func_lo2o_result=${1} ;; +- esac +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=${1%.*}.lo +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=$(( $* )) +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=${#1} +-} +- +-_LT_EOF +- ;; +- *) # Bourne compatible functions. +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- # Extract subdirectory from the argument. +- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` +- if test "X$func_dirname_result" = "X${1}"; then +- func_dirname_result="${3}" +- else +- func_dirname_result="$func_dirname_result${2}" +- fi +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result=`$ECHO "${1}" | $SED "$basename"` +-} +- +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-# func_strip_suffix prefix name +-func_stripname () +-{ +- case ${2} in +- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; +- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; +- esac +-} +- +-# sed scripts: +-my_sed_long_opt='1s/^$-[^=]*$=.*/\1/;q' +-my_sed_long_arg='1s/^-[^=]*=//' +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` +- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=`expr "$@"` +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +-} +- +-_LT_EOF +-esac +- +-case $lt_shell_append in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1+=\$2" +-} +-_LT_EOF +- ;; +- *) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1=\$$1\$2" +-} +- +-_LT_EOF +- ;; +- esac +- +- +- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || ++ sed '$q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ if test x"$xsi_shell" = xyes; then ++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ ++func_dirname ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_basename ()$/,/^} # func_basename /c\ ++func_basename ()\ ++{\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ ++func_dirname_and_basename ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ ++func_stripname ()\ ++{\ ++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ ++\ # positional parameters, so assign one to ordinary parameter first.\ ++\ func_stripname_result=${3}\ ++\ func_stripname_result=${func_stripname_result#"${1}"}\ ++\ func_stripname_result=${func_stripname_result%"${2}"}\ ++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ ++func_split_long_opt ()\ ++{\ ++\ func_split_long_opt_name=${1%%=*}\ ++\ func_split_long_opt_arg=${1#*=}\ ++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ ++func_split_short_opt ()\ ++{\ ++\ func_split_short_opt_arg=${1#??}\ ++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ ++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ ++func_lo2o ()\ ++{\ ++\ case ${1} in\ ++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ ++\ *) func_lo2o_result=${1} ;;\ ++\ esac\ ++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_xform ()$/,/^} # func_xform /c\ ++func_xform ()\ ++{\ ++ func_xform_result=${1%.*}.lo\ ++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_arith ()$/,/^} # func_arith /c\ ++func_arith ()\ ++{\ ++ func_arith_result=$(( $* ))\ ++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_len ()$/,/^} # func_len /c\ ++func_len ()\ ++{\ ++ func_len_result=${#1}\ ++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++fi ++ ++if test x"$lt_shell_append" = xyes; then ++ sed -e '/^func_append ()$/,/^} # func_append /c\ ++func_append ()\ ++{\ ++ eval "${1}+=\\${2}"\ ++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ ++func_append_quoted ()\ ++{\ ++\ func_quote_for_eval "${2}"\ ++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ ++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ # Save a `func_append' function call where possible by direct use of '+=' ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1+="%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++else ++ # Save a `func_append' function call even when '+=' is not available ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++fi ++ ++if test x"$_lt_function_replace_fail" = x":"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 ++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} ++fi ++ ++ ++ mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +diff --git a/gprof/configure b/gprof/configure +index 626e1c7..a88719c 100755 +--- a/gprof/configure ++++ b/gprof/configure +@@ -630,8 +630,11 @@ OTOOL + LIPO + NMEDIT + DSYMUTIL ++MANIFEST_TOOL + RANLIB ++ac_ct_AR + AR ++DLLTOOL + OBJDUMP + LN_S + NM +@@ -743,6 +746,7 @@ enable_static + with_pic + enable_fast_install + with_gnu_ld ++with_libtool_sysroot + enable_libtool_lock + enable_plugins + enable_largefile +@@ -1401,6 +1405,8 @@ Optional Packages: + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] ++ --with-libtool-sysroot=DIR Search for dependent libraries within DIR ++ (or the compiler's sysroot if not specified). + + Some influential environment variables: + CC C compiler command +@@ -4835,8 +4841,8 @@ esac + + + +-macro_version='2.2.7a' +-macro_revision='1.3134' ++macro_version='2.4' ++macro_revision='1.3293' + + + +@@ -4876,7 +4882,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 + $as_echo_n "checking how to print strings... " >&6; } + # Test print first, because it will be a builtin if present. +-if test "X`print -r -- -n 2>/dev/null`" = X-n && \ ++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' + elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then +@@ -5562,8 +5568,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; + # Try some XSI features + xsi_shell=no + ( _lt_dummy="a/b/c" +- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ +- = c,a/b,, \ ++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +@@ -5612,6 +5618,80 @@ esac + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 ++$as_echo_n "checking how to convert $build file names to $host format... " >&6; } ++if test "${lt_cv_to_host_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ++ ;; ++ esac ++ ;; ++ *-*-cygwin* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ++ ;; ++ esac ++ ;; ++ * ) # unhandled hosts (and "normal" native builds) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++esac ++ ++fi ++ ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 ++$as_echo "$lt_cv_to_host_file_cmd" >&6; } ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 ++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } ++if test "${lt_cv_to_tool_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ #assume ordinary cross tools, or native build. ++lt_cv_to_tool_file_cmd=func_convert_file_noop ++case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ esac ++ ;; ++esac ++ ++fi ++ ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 ++$as_echo "$lt_cv_to_tool_file_cmd" >&6; } ++ ++ ++ ++ ++ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 + $as_echo_n "checking for $LD option to reload object files... " >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then : +@@ -5628,6 +5708,11 @@ case $reload_flag in + esac + reload_cmds='$LD$reload_flag -o $output$reload_objs' + case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ if test "$GCC" != yes; then ++ reload_cmds=false ++ fi ++ ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' +@@ -5796,7 +5881,8 @@ mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ # Keep this pattern in sync with the one in func_win32_libid. ++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; +@@ -5873,11 +5959,6 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +-linux-uclibc*) +- lt_cv_deplibs_check_method=pass_all +- lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so` +- ;; +- + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' +@@ -5955,6 +6036,21 @@ esac + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 + $as_echo "$lt_cv_deplibs_check_method" >&6; } ++ ++file_magic_glob= ++want_nocaseglob=no ++if test "$build" = "$host"; then ++ case $host_os in ++ mingw* | pw32*) ++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then ++ want_nocaseglob=yes ++ else ++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/$..$/s\/[\1]\/[\1]\/g;/g"` ++ fi ++ ;; ++ esac ++fi ++ + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -5970,9 +6066,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$DLLTOOL"; then ++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++DLLTOOL=$ac_cv_prog_DLLTOOL ++if test -n "$DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 ++$as_echo "$DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DLLTOOL"; then ++ ac_ct_DLLTOOL=$DLLTOOL ++ # Extract the first word of "dlltool", so it can be a program name with args. ++set dummy dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_DLLTOOL"; then ++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DLLTOOL="dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL ++if test -n "$ac_ct_DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 ++$as_echo "$ac_ct_DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_DLLTOOL" = x; then ++ DLLTOOL="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ DLLTOOL=$ac_ct_DLLTOOL ++ fi ++else ++ DLLTOOL="$ac_cv_prog_DLLTOOL" ++fi ++ ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 ++$as_echo_n "checking how to associate runtime and link libraries... " >&6; } ++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_sharedlib_from_linklib_cmd='unknown' ++ ++case $host_os in ++cygwin* | mingw* | pw32* | cegcc*) ++ # two different shell functions defined in ltmain.sh ++ # decide which to use based on capabilities of $DLLTOOL ++ case `$DLLTOOL --help 2>&1` in ++ *--identify-strict*) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ++ ;; ++ *) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ++ ;; ++ esac ++ ;; ++*) ++ # fallback: assume linklib IS sharedlib ++ lt_cv_sharedlib_from_linklib_cmd="$ECHO" ++ ;; ++esac ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 ++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } ++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd ++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO ++ ++ ++ ++ ++ ++ ++ + if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ar; ac_word=$2 ++ for ac_prog in ar ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_AR+set}" = set; then : +@@ -5988,7 +6237,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_AR="${ac_tool_prefix}ar" ++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6008,11 +6257,15 @@ $as_echo "no" >&6; } + fi + + ++ test -n "$AR" && break ++ done + fi +-if test -z "$ac_cv_prog_AR"; then ++if test -z "$AR"; then + ac_ct_AR=$AR +- # Extract the first word of "ar", so it can be a program name with args. +-set dummy ar; ac_word=$2 ++ for ac_prog in ar ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : +@@ -6028,7 +6281,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_AR="ar" ++ ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6047,6 +6300,10 @@ else + $as_echo "no" >&6; } + fi + ++ ++ test -n "$ac_ct_AR" && break ++done ++ + if test "x$ac_ct_AR" = x; then + AR="false" + else +@@ -6058,12 +6315,10 @@ ac_tool_warned=yes ;; + esac + AR=$ac_ct_AR + fi +-else +- AR="$ac_cv_prog_AR" + fi + +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru ++: ${AR=ar} ++: ${AR_FLAGS=cru} + + + +@@ -6075,6 +6330,64 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 ++$as_echo_n "checking for archiver @FILE support... " >&6; } ++if test "${lt_cv_ar_at_file+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_ar_at_file=no ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ echo conftest.$ac_objext > conftest.lst ++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -eq 0; then ++ # Ensure the archiver fails upon bogus file names. ++ rm -f conftest.$ac_objext libconftest.a ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -ne 0; then ++ lt_cv_ar_at_file=@ ++ fi ++ fi ++ rm -f conftest.* libconftest.a ++ ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 ++$as_echo "$lt_cv_ar_at_file" >&6; } ++ ++if test "x$lt_cv_ar_at_file" = xno; then ++ archiver_list_spec= ++else ++ archiver_list_spec=$lt_cv_ar_at_file ++fi ++ ++ ++ ++ ++ ++ ++ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +@@ -6409,8 +6722,8 @@ esac + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" + + # Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" +-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" + + # Handle CRLF in mingw tool chain + opt_cr= +@@ -6446,6 +6759,7 @@ for ac_symprfx in "" "_"; do + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi ++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -6487,6 +6801,18 @@ _LT_EOF + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext ++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ ++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) ++/* DATA imports from DLLs on WIN32 con't be const, because runtime ++ relocations are performed -- see ld's documentation on pseudo-relocs. */ ++# define LT_DLSYM_CONST ++#elif defined(__osf__) ++/* This system does not cope well with relocations in const data. */ ++# define LT_DLSYM_CONST ++#else ++# define LT_DLSYM_CONST const ++#endif ++ + #ifdef __cplusplus + extern "C" { + #endif +@@ -6498,7 +6824,7 @@ _LT_EOF + cat <<_LT_EOF >> conftest.$ac_ext + + /* The mapping between symbol names and symbols. */ +-const struct { ++LT_DLSYM_CONST struct { + const char *name; + void *address; + } +@@ -6524,8 +6850,8 @@ static const void *lt_preloaded_setup() { + _LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" ++ lt_globsym_save_LIBS=$LIBS ++ lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 +@@ -6535,8 +6861,8 @@ _LT_EOF + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" ++ LIBS=$lt_globsym_save_LIBS ++ CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi +@@ -6573,6 +6899,18 @@ else + $as_echo "ok" >&6; } + fi + ++# Response file support. ++if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ nm_file_list_spec='@' ++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then ++ nm_file_list_spec='@' ++fi ++ ++ ++ ++ ++ ++ + + + +@@ -6594,6 +6932,43 @@ fi + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 ++$as_echo_n "checking for sysroot... " >&6; } ++ ++# Check whether --with-libtool-sysroot was given. ++if test "${with_libtool_sysroot+set}" = set; then : ++ withval=$with_libtool_sysroot; ++else ++ with_libtool_sysroot=no ++fi ++ ++ ++lt_sysroot= ++case ${with_libtool_sysroot} in #( ++ yes) ++ if test "$GCC" = yes; then ++ lt_sysroot=`$CC --print-sysroot 2>/dev/null` ++ fi ++ ;; #( ++ /*) ++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"` ++ ;; #( ++ no|'') ++ ;; #( ++ *) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5 ++$as_echo "${with_libtool_sysroot}" >&6; } ++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5 ++ ;; ++esac ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 ++$as_echo "${lt_sysroot:-no}" >&6; } ++ ++ ++ ++ ++ + # Check whether --enable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +@@ -6800,6 +7175,123 @@ esac + + need_locks="$enable_libtool_lock" + ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. ++set dummy ${ac_tool_prefix}mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$MANIFEST_TOOL"; then ++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL ++if test -n "$MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 ++$as_echo "$MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL ++ # Extract the first word of "mt", so it can be a program name with args. ++set dummy mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_MANIFEST_TOOL"; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL ++if test -n "$ac_ct_MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 ++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_MANIFEST_TOOL" = x; then ++ MANIFEST_TOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL ++ fi ++else ++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" ++fi ++ ++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 ++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } ++if test "${lt_cv_path_mainfest_tool+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_path_mainfest_tool=no ++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 ++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out ++ cat conftest.err >&5 ++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then ++ lt_cv_path_mainfest_tool=yes ++ fi ++ rm -f conftest* ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 ++$as_echo "$lt_cv_path_mainfest_tool" >&6; } ++if test "x$lt_cv_path_mainfest_tool" != xyes; then ++ MANIFEST_TOOL=: ++fi ++ ++ ++ ++ ++ + + case $host_os in + rhapsody* | darwin*) +@@ -7363,6 +7855,8 @@ _LT_EOF + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 ++ echo "$RANLIB libconftest.a" >&5 ++ $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF + int main() { return 0;} + _LT_EOF +@@ -7558,7 +8052,8 @@ fi + LIBTOOL_DEPS="$ltmain" + + # Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++LIBTOOL='$(SHELL) $(top_builddir)' ++LIBTOOL="$LIBTOOL/${host_alias}-libtool" + + + +@@ -7647,7 +8142,7 @@ aix3*) + esac + + # Global variables: +-ofile=libtool ++ofile=${host_alias}-libtool + can_build_shared=yes + + # All known linkers require a `.a' archive for static linking (except MSVC, +@@ -7945,8 +8440,6 @@ fi + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -8112,6 +8605,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; ++ nagfor*) ++ # NAG Fortran compiler ++ lt_prog_compiler_wl='-Wl,-Wl,,' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) +@@ -8174,7 +8673,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in +- f77* | f90* | f95*) ++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; +@@ -8231,13 +8730,17 @@ case $host_os in + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; + esac +-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 +-$as_echo "$lt_prog_compiler_pic" >&6; } +- +- +- +- + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 ++$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++if test "${lt_cv_prog_compiler_pic+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 ++$as_echo "$lt_cv_prog_compiler_pic" >&6; } ++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + + # + # Check to make sure the PIC flag actually works. +@@ -8298,6 +8801,11 @@ fi + + + ++ ++ ++ ++ ++ + # + # Check to make sure the static flag actually works. + # +@@ -8648,7 +9156,8 @@ _LT_EOF + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' ++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +@@ -8747,12 +9256,12 @@ _LT_EOF + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' +- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ +- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac +@@ -8766,8 +9275,8 @@ _LT_EOF + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + +@@ -8785,8 +9294,8 @@ _LT_EOF + + _LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -8832,8 +9341,8 @@ _LT_EOF + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -8963,7 +9472,13 @@ _LT_EOF + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -8976,22 +9491,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +@@ -9003,7 +9525,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + else + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9016,22 +9544,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, +@@ -9076,20 +9611,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_from_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes=yes ++ case $cc_basename in ++ cl*) ++ # Native MSVC ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ file_list_spec='@' ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ sed -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; ++ else ++ sed -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; ++ fi~ ++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ ++ linknames=' ++ # The linker will not automatically build a static lib if we build a DLL. ++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true' ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ # Don't use ranlib ++ old_postinstall_cmds='chmod 644 $oldlib' ++ postlink_cmds='lt_outputfile="@OUTPUT@"~ ++ lt_tool_outputfile="@TOOL_OUTPUT@"~ ++ case $lt_outputfile in ++ *.exe|*.EXE) ;; ++ *) ++ lt_outputfile="$lt_outputfile.exe" ++ lt_tool_outputfile="$lt_tool_outputfile.exe" ++ ;; ++ esac~ ++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then ++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; ++ $RM "$lt_outputfile.manifest"; ++ fi' ++ ;; ++ *) ++ # Assume MSVC wrapper ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ esac + ;; + + darwin* | rhapsody*) +@@ -9150,7 +9728,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no +@@ -9158,7 +9736,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux9*) + if test "$GCC" = yes; then +- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi +@@ -9174,7 +9752,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi +@@ -9198,10 +9776,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +@@ -9280,23 +9858,36 @@ fi + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ # This should be the same for all languages, so no per-tag cache variable. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 ++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } ++if test "${lt_cv_irix_exported_symbol+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-int foo(void) {} ++int foo (void) { return 0; } + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' +- ++ lt_cv_irix_exported_symbol=yes ++else ++ lt_cv_irix_exported_symbol=no + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +- LDFLAGS="$save_LDFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 ++$as_echo "$lt_cv_irix_exported_symbol" >&6; } ++ if test "$lt_cv_irix_exported_symbol" = yes; then ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' +@@ -9381,7 +9972,7 @@ rm -f core conftest.err conftest.$ac_objext \ + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' +@@ -9400,9 +9991,9 @@ rm -f core conftest.err conftest.$ac_objext \ + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' +- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) +@@ -9978,8 +10569,9 @@ cygwin* | mingw* | pw32* | cegcc*) + need_version=no + need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ case $GCC,$cc_basename in ++ yes,*) ++ # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +@@ -10012,13 +10604,71 @@ cygwin* | mingw* | pw32* | cegcc*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac ++ dynamic_linker='Win32 ld.exe' ++ ;; ++ ++ *,cl*) ++ # Native MSVC ++ libname_spec='$name' ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='${libname}.dll.lib' ++ ++ case $build_os in ++ mingw*) ++ sys_lib_search_path_spec= ++ lt_save_ifs=$IFS ++ IFS=';' ++ for lt_path in $LIB ++ do ++ IFS=$lt_save_ifs ++ # Let DOS variable expansion print the short 8.3 style file name. ++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` ++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" ++ done ++ IFS=$lt_save_ifs ++ # Convert to MSYS style. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \$[a-zA-Z]\$:| /\\1|g' -e 's|^ ||'` ++ ;; ++ cygwin*) ++ # Convert to unix form, then to dos form, then back to unix form ++ # but this time dos style (no spaces!) so that the unix form looks ++ # like /cygdrive/c/PROGRA~1:/cygdr... ++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` ++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` ++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ ;; ++ *) ++ sys_lib_search_path_spec="$LIB" ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # FIXME: find the short name or the path components, as spaces are ++ # common. (e.g. "Program Files" -> "PROGRA~1") ++ ;; ++ esac ++ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ dynamic_linker='Win32 link.exe' + ;; + + *) ++ # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ dynamic_linker='Win32 ld.exe' + ;; + esac +- dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +@@ -10110,7 +10760,7 @@ haiku*) + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes +- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib' ++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +@@ -10950,10 +11600,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -11056,10 +11706,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -12961,13 +13611,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' + lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' + lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' + lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' + reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' + reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' + OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' + deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' + file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' ++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' ++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' ++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' ++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' + AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' + AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' ++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' + STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' + RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' + old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +@@ -12982,14 +13639,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de + lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' ++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' ++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' + objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' + MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' + lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' + need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' ++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' + DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' + NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' + LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +@@ -13022,12 +13682,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q + hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' + inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' + link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`' + always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' + export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' + exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' + include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' + prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' ++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' + file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' + variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' + need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +@@ -13082,8 +13742,13 @@ reload_flag \ + OBJDUMP \ + deplibs_check_method \ + file_magic_cmd \ ++file_magic_glob \ ++want_nocaseglob \ ++DLLTOOL \ ++sharedlib_from_linklib_cmd \ + AR \ + AR_FLAGS \ ++archiver_list_spec \ + STRIP \ + RANLIB \ + CC \ +@@ -13093,12 +13758,14 @@ lt_cv_sys_global_symbol_pipe \ + lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++nm_file_list_spec \ + lt_prog_compiler_no_builtin_flag \ +-lt_prog_compiler_wl \ + lt_prog_compiler_pic \ ++lt_prog_compiler_wl \ + lt_prog_compiler_static \ + lt_cv_prog_compiler_c_o \ + need_locks \ ++MANIFEST_TOOL \ + DSYMUTIL \ + NMEDIT \ + LIPO \ +@@ -13114,7 +13781,6 @@ no_undefined_flag \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ +-fix_srcfile_path \ + exclude_expsyms \ + include_expsyms \ + file_list_spec \ +@@ -13150,6 +13816,7 @@ module_cmds \ + module_expsym_cmds \ + export_symbols_cmds \ + prelink_cmds \ ++postlink_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + finish_cmds \ +@@ -13906,7 +14573,8 @@ $as_echo X"$file" | + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, ++# Inc. + # Written by Gordon Matzigkeit, 1996 + # + # This file is part of GNU Libtool. +@@ -14009,19 +14677,42 @@ SP2NL=$lt_lt_SP2NL + # turn newlines into spaces. + NL2SP=$lt_lt_NL2SP + ++# convert \$build file names to \$host format. ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++ ++# convert \$build files to toolchain format. ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++ + # An object symbol dumper. + OBJDUMP=$lt_OBJDUMP + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + +-# Command to use when deplibs_check_method == "file_magic". ++# Command to use when deplibs_check_method = "file_magic". + file_magic_cmd=$lt_file_magic_cmd + ++# How to find potential files when deplibs_check_method = "file_magic". ++file_magic_glob=$lt_file_magic_glob ++ ++# Find potential files using nocaseglob when deplibs_check_method = "file_magic". ++want_nocaseglob=$lt_want_nocaseglob ++ ++# DLL creation program. ++DLLTOOL=$lt_DLLTOOL ++ ++# Command to associate shared and link libraries. ++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd ++ + # The archiver. + AR=$lt_AR ++ ++# Flags to create an archive. + AR_FLAGS=$lt_AR_FLAGS + ++# How to feed a file listing to the archiver. ++archiver_list_spec=$lt_archiver_list_spec ++ + # A symbol stripping program. + STRIP=$lt_STRIP + +@@ -14051,6 +14742,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + # Transform the output of nm in a C name address pair when lib prefix is needed. + global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + ++# Specify filename containing input files for \$NM. ++nm_file_list_spec=$lt_nm_file_list_spec ++ ++# The root where to search for dependent libraries,and in which our libraries should be installed. ++lt_sysroot=$lt_sysroot ++ + # The name of the directory that contains temporary libtool files. + objdir=$objdir + +@@ -14060,6 +14757,9 @@ MAGIC_CMD=$MAGIC_CMD + # Must we lock files when doing compilation? + need_locks=$lt_need_locks + ++# Manifest tool. ++MANIFEST_TOOL=$lt_MANIFEST_TOOL ++ + # Tool to manipulate archived DWARF debug symbol files on Mac OS X. + DSYMUTIL=$lt_DSYMUTIL + +@@ -14174,12 +14874,12 @@ with_gcc=$GCC + # Compiler flag to turn off builtin functions. + no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl +- + # Additional compiler flags for building library objects. + pic_flag=$lt_lt_prog_compiler_pic + ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ + # Compiler flag to prevent dynamic linking. + link_static_flag=$lt_lt_prog_compiler_static + +@@ -14266,9 +14966,6 @@ inherit_rpath=$inherit_rpath + # Whether libtool must link a program against all its dependency libraries. + link_all_deplibs=$link_all_deplibs + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- + # Set to "yes" if exported symbols are required. + always_export_symbols=$always_export_symbols + +@@ -14284,6 +14981,9 @@ include_expsyms=$lt_include_expsyms + # Commands necessary for linking programs (against libraries) with templates. + prelink_cmds=$lt_prelink_cmds + ++# Commands necessary for finishing linking programs. ++postlink_cmds=$lt_postlink_cmds ++ + # Specify filename containing input files. + file_list_spec=$lt_file_list_spec + +@@ -14316,210 +15016,169 @@ ltmain="$ac_aux_dir/ltmain.sh" + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? +- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- case $xsi_shell in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result="${1##*/}" +-} +- +-# func_dirname_and_basename file append nondir_replacement +-# perform func_basename and func_dirname in a single function +-# call: +-# dirname: Compute the dirname of FILE. If nonempty, +-# add APPEND to the result, otherwise set result +-# to NONDIR_REPLACEMENT. +-# value returned in "$func_dirname_result" +-# basename: Compute filename of FILE. +-# value retuned in "$func_basename_result" +-# Implementation must be kept synchronized with func_dirname +-# and func_basename. For efficiency, we do not delegate to +-# those functions but instead duplicate the functionality here. +-func_dirname_and_basename () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +- func_basename_result="${1##*/}" +-} +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-func_stripname () +-{ +- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are +- # positional parameters, so assign one to ordinary parameter first. +- func_stripname_result=${3} +- func_stripname_result=${func_stripname_result#"${1}"} +- func_stripname_result=${func_stripname_result%"${2}"} +-} +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=${1%%=*} +- func_opt_split_arg=${1#*=} +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- case ${1} in +- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; +- *) func_lo2o_result=${1} ;; +- esac +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=${1%.*}.lo +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=$(( $* )) +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=${#1} +-} +- +-_LT_EOF +- ;; +- *) # Bourne compatible functions. +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- # Extract subdirectory from the argument. +- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` +- if test "X$func_dirname_result" = "X${1}"; then +- func_dirname_result="${3}" +- else +- func_dirname_result="$func_dirname_result${2}" +- fi +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result=`$ECHO "${1}" | $SED "$basename"` +-} +- +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-# func_strip_suffix prefix name +-func_stripname () +-{ +- case ${2} in +- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; +- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; +- esac +-} +- +-# sed scripts: +-my_sed_long_opt='1s/^$-[^=]*$=.*/\1/;q' +-my_sed_long_arg='1s/^-[^=]*=//' +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` +- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=`expr "$@"` +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +-} +- +-_LT_EOF +-esac +- +-case $lt_shell_append in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1+=\$2" +-} +-_LT_EOF +- ;; +- *) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1=\$$1\$2" +-} +- +-_LT_EOF +- ;; +- esac +- +- +- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || ++ sed '$q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ if test x"$xsi_shell" = xyes; then ++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ ++func_dirname ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_basename ()$/,/^} # func_basename /c\ ++func_basename ()\ ++{\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ ++func_dirname_and_basename ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ ++func_stripname ()\ ++{\ ++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ ++\ # positional parameters, so assign one to ordinary parameter first.\ ++\ func_stripname_result=${3}\ ++\ func_stripname_result=${func_stripname_result#"${1}"}\ ++\ func_stripname_result=${func_stripname_result%"${2}"}\ ++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ ++func_split_long_opt ()\ ++{\ ++\ func_split_long_opt_name=${1%%=*}\ ++\ func_split_long_opt_arg=${1#*=}\ ++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ ++func_split_short_opt ()\ ++{\ ++\ func_split_short_opt_arg=${1#??}\ ++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ ++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ ++func_lo2o ()\ ++{\ ++\ case ${1} in\ ++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ ++\ *) func_lo2o_result=${1} ;;\ ++\ esac\ ++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_xform ()$/,/^} # func_xform /c\ ++func_xform ()\ ++{\ ++ func_xform_result=${1%.*}.lo\ ++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_arith ()$/,/^} # func_arith /c\ ++func_arith ()\ ++{\ ++ func_arith_result=$(( $* ))\ ++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_len ()$/,/^} # func_len /c\ ++func_len ()\ ++{\ ++ func_len_result=${#1}\ ++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++fi ++ ++if test x"$lt_shell_append" = xyes; then ++ sed -e '/^func_append ()$/,/^} # func_append /c\ ++func_append ()\ ++{\ ++ eval "${1}+=\\${2}"\ ++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ ++func_append_quoted ()\ ++{\ ++\ func_quote_for_eval "${2}"\ ++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ ++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ # Save a `func_append' function call where possible by direct use of '+=' ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1+="%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++else ++ # Save a `func_append' function call even when '+=' is not available ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++fi ++ ++if test x"$_lt_function_replace_fail" = x":"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 ++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} ++fi ++ ++ ++ mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +diff --git a/ld/configure b/ld/configure +index f9be51a..3df1149 100755 +--- a/ld/configure ++++ b/ld/configure +@@ -658,8 +658,11 @@ OTOOL + LIPO + NMEDIT + DSYMUTIL ++MANIFEST_TOOL + RANLIB ++ac_ct_AR + AR ++DLLTOOL + OBJDUMP + LN_S + NM +@@ -781,6 +784,7 @@ enable_static + with_pic + enable_fast_install + with_gnu_ld ++with_libtool_sysroot + enable_libtool_lock + enable_plugins + enable_largefile +@@ -1462,6 +1466,8 @@ Optional Packages: + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] ++ --with-libtool-sysroot=DIR Search for dependent libraries within DIR ++ (or the compiler's sysroot if not specified). + --with-lib-path=dir1:dir2... set default LIB_PATH + --with-sysroot=DIR Search for usr/lib et al within DIR. + +@@ -5656,8 +5662,8 @@ esac + + + +-macro_version='2.2.7a' +-macro_revision='1.3134' ++macro_version='2.4' ++macro_revision='1.3293' + + + +@@ -5697,7 +5703,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 + $as_echo_n "checking how to print strings... " >&6; } + # Test print first, because it will be a builtin if present. +-if test "X`print -r -- -n 2>/dev/null`" = X-n && \ ++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' + elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then +@@ -6383,8 +6389,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; + # Try some XSI features + xsi_shell=no + ( _lt_dummy="a/b/c" +- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ +- = c,a/b,, \ ++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +@@ -6433,6 +6439,80 @@ esac + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 ++$as_echo_n "checking how to convert $build file names to $host format... " >&6; } ++if test "${lt_cv_to_host_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ++ ;; ++ esac ++ ;; ++ *-*-cygwin* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ++ ;; ++ esac ++ ;; ++ * ) # unhandled hosts (and "normal" native builds) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++esac ++ ++fi ++ ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 ++$as_echo "$lt_cv_to_host_file_cmd" >&6; } ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 ++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } ++if test "${lt_cv_to_tool_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ #assume ordinary cross tools, or native build. ++lt_cv_to_tool_file_cmd=func_convert_file_noop ++case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ esac ++ ;; ++esac ++ ++fi ++ ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 ++$as_echo "$lt_cv_to_tool_file_cmd" >&6; } ++ ++ ++ ++ ++ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 + $as_echo_n "checking for $LD option to reload object files... " >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then : +@@ -6449,6 +6529,11 @@ case $reload_flag in + esac + reload_cmds='$LD$reload_flag -o $output$reload_objs' + case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ if test "$GCC" != yes; then ++ reload_cmds=false ++ fi ++ ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' +@@ -6617,7 +6702,8 @@ mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ # Keep this pattern in sync with the one in func_win32_libid. ++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; +@@ -6771,6 +6857,21 @@ esac + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 + $as_echo "$lt_cv_deplibs_check_method" >&6; } ++ ++file_magic_glob= ++want_nocaseglob=no ++if test "$build" = "$host"; then ++ case $host_os in ++ mingw* | pw32*) ++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then ++ want_nocaseglob=yes ++ else ++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/$..$/s\/[\1]\/[\1]\/g;/g"` ++ fi ++ ;; ++ esac ++fi ++ + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -6786,9 +6887,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$DLLTOOL"; then ++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++DLLTOOL=$ac_cv_prog_DLLTOOL ++if test -n "$DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 ++$as_echo "$DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DLLTOOL"; then ++ ac_ct_DLLTOOL=$DLLTOOL ++ # Extract the first word of "dlltool", so it can be a program name with args. ++set dummy dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_DLLTOOL"; then ++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DLLTOOL="dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL ++if test -n "$ac_ct_DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 ++$as_echo "$ac_ct_DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_DLLTOOL" = x; then ++ DLLTOOL="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ DLLTOOL=$ac_ct_DLLTOOL ++ fi ++else ++ DLLTOOL="$ac_cv_prog_DLLTOOL" ++fi ++ ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 ++$as_echo_n "checking how to associate runtime and link libraries... " >&6; } ++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_sharedlib_from_linklib_cmd='unknown' ++ ++case $host_os in ++cygwin* | mingw* | pw32* | cegcc*) ++ # two different shell functions defined in ltmain.sh ++ # decide which to use based on capabilities of $DLLTOOL ++ case `$DLLTOOL --help 2>&1` in ++ *--identify-strict*) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ++ ;; ++ *) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ++ ;; ++ esac ++ ;; ++*) ++ # fallback: assume linklib IS sharedlib ++ lt_cv_sharedlib_from_linklib_cmd="$ECHO" ++ ;; ++esac ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 ++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } ++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd ++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO ++ ++ ++ ++ ++ ++ ++ + if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ar; ac_word=$2 ++ for ac_prog in ar ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_AR+set}" = set; then : +@@ -6804,7 +7058,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_AR="${ac_tool_prefix}ar" ++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6824,11 +7078,15 @@ $as_echo "no" >&6; } + fi + + ++ test -n "$AR" && break ++ done + fi +-if test -z "$ac_cv_prog_AR"; then ++if test -z "$AR"; then + ac_ct_AR=$AR +- # Extract the first word of "ar", so it can be a program name with args. +-set dummy ar; ac_word=$2 ++ for ac_prog in ar ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : +@@ -6844,7 +7102,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_AR="ar" ++ ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6863,6 +7121,10 @@ else + $as_echo "no" >&6; } + fi + ++ ++ test -n "$ac_ct_AR" && break ++done ++ + if test "x$ac_ct_AR" = x; then + AR="false" + else +@@ -6874,12 +7136,12 @@ ac_tool_warned=yes ;; + esac + AR=$ac_ct_AR + fi +-else +- AR="$ac_cv_prog_AR" + fi + +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru ++: ${AR=ar} ++: ${AR_FLAGS=cru} ++ ++ + + + +@@ -6889,6 +7151,62 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 ++$as_echo_n "checking for archiver @FILE support... " >&6; } ++if test "${lt_cv_ar_at_file+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_ar_at_file=no ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ echo conftest.$ac_objext > conftest.lst ++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -eq 0; then ++ # Ensure the archiver fails upon bogus file names. ++ rm -f conftest.$ac_objext libconftest.a ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -ne 0; then ++ lt_cv_ar_at_file=@ ++ fi ++ fi ++ rm -f conftest.* libconftest.a ++ ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 ++$as_echo "$lt_cv_ar_at_file" >&6; } ++ ++if test "x$lt_cv_ar_at_file" = xno; then ++ archiver_list_spec= ++else ++ archiver_list_spec=$lt_cv_ar_at_file ++fi ++ ++ ++ ++ ++ + + + if test -n "$ac_tool_prefix"; then +@@ -7225,8 +7543,8 @@ esac + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" + + # Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" +-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" + + # Handle CRLF in mingw tool chain + opt_cr= +@@ -7262,6 +7580,7 @@ for ac_symprfx in "" "_"; do + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi ++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -7303,6 +7622,18 @@ _LT_EOF + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext ++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ ++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) ++/* DATA imports from DLLs on WIN32 con't be const, because runtime ++ relocations are performed -- see ld's documentation on pseudo-relocs. */ ++# define LT_DLSYM_CONST ++#elif defined(__osf__) ++/* This system does not cope well with relocations in const data. */ ++# define LT_DLSYM_CONST ++#else ++# define LT_DLSYM_CONST const ++#endif ++ + #ifdef __cplusplus + extern "C" { + #endif +@@ -7314,7 +7645,7 @@ _LT_EOF + cat <<_LT_EOF >> conftest.$ac_ext + + /* The mapping between symbol names and symbols. */ +-const struct { ++LT_DLSYM_CONST struct { + const char *name; + void *address; + } +@@ -7340,8 +7671,8 @@ static const void *lt_preloaded_setup() { + _LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" ++ lt_globsym_save_LIBS=$LIBS ++ lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 +@@ -7351,8 +7682,8 @@ _LT_EOF + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" ++ LIBS=$lt_globsym_save_LIBS ++ CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi +@@ -7389,6 +7720,19 @@ else + $as_echo "ok" >&6; } + fi + ++# Response file support. ++if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ nm_file_list_spec='@' ++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then ++ nm_file_list_spec='@' ++fi ++ ++ ++ ++ ++ ++ ++ + + + +@@ -7409,6 +7753,42 @@ fi + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 ++$as_echo_n "checking for sysroot... " >&6; } ++ ++# Check whether --with-libtool-sysroot was given. ++if test "${with_libtool_sysroot+set}" = set; then : ++ withval=$with_libtool_sysroot; ++else ++ with_libtool_sysroot=no ++fi ++ ++ ++lt_sysroot= ++case ${with_libtool_sysroot} in #( ++ yes) ++ if test "$GCC" = yes; then ++ lt_sysroot=`$CC --print-sysroot 2>/dev/null` ++ fi ++ ;; #( ++ /*) ++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"` ++ ;; #( ++ no|'') ++ ;; #( ++ *) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5 ++$as_echo "${with_libtool_sysroot}" >&6; } ++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5 ++ ;; ++esac ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 ++$as_echo "${lt_sysroot:-no}" >&6; } ++ ++ ++ ++ + + # Check whether --enable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then : +@@ -7616,6 +7996,123 @@ esac + + need_locks="$enable_libtool_lock" + ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. ++set dummy ${ac_tool_prefix}mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$MANIFEST_TOOL"; then ++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL ++if test -n "$MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 ++$as_echo "$MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL ++ # Extract the first word of "mt", so it can be a program name with args. ++set dummy mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_MANIFEST_TOOL"; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL ++if test -n "$ac_ct_MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 ++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_MANIFEST_TOOL" = x; then ++ MANIFEST_TOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL ++ fi ++else ++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" ++fi ++ ++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 ++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } ++if test "${lt_cv_path_mainfest_tool+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_path_mainfest_tool=no ++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 ++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out ++ cat conftest.err >&5 ++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then ++ lt_cv_path_mainfest_tool=yes ++ fi ++ rm -f conftest* ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 ++$as_echo "$lt_cv_path_mainfest_tool" >&6; } ++if test "x$lt_cv_path_mainfest_tool" != xyes; then ++ MANIFEST_TOOL=: ++fi ++ ++ ++ ++ ++ + + case $host_os in + rhapsody* | darwin*) +@@ -8179,6 +8676,8 @@ _LT_EOF + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 ++ echo "$RANLIB libconftest.a" >&5 ++ $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF + int main() { return 0;} + _LT_EOF +@@ -8247,6 +8746,16 @@ done + + + ++func_stripname_cnf () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; ++ esac ++} # func_stripname_cnf ++ ++ ++ + + + # Set options +@@ -8375,7 +8884,8 @@ fi + LIBTOOL_DEPS="$ltmain" + + # Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++LIBTOOL='$(SHELL) $(top_builddir)' ++LIBTOOL="$LIBTOOL/${host_alias}-libtool" + + + +@@ -8464,7 +8974,7 @@ aix3*) + esac + + # Global variables: +-ofile=libtool ++ofile=${host_alias}-libtool + can_build_shared=yes + + # All known linkers require a `.a' archive for static linking (except MSVC, +@@ -8762,8 +9272,6 @@ fi + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -8929,6 +9437,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; ++ nagfor*) ++ # NAG Fortran compiler ++ lt_prog_compiler_wl='-Wl,-Wl,,' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) +@@ -8991,7 +9505,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in +- f77* | f90* | f95*) ++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; +@@ -9048,13 +9562,17 @@ case $host_os in + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; + esac +-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 +-$as_echo "$lt_prog_compiler_pic" >&6; } +- +- +- +- + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 ++$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++if test "${lt_cv_prog_compiler_pic+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 ++$as_echo "$lt_cv_prog_compiler_pic" >&6; } ++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + + # + # Check to make sure the PIC flag actually works. +@@ -9115,6 +9633,11 @@ fi + + + ++ ++ ++ ++ ++ + # + # Check to make sure the static flag actually works. + # +@@ -9465,7 +9988,8 @@ _LT_EOF + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' ++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +@@ -9564,12 +10088,12 @@ _LT_EOF + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' +- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ +- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac +@@ -9583,8 +10107,8 @@ _LT_EOF + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + +@@ -9602,8 +10126,8 @@ _LT_EOF + + _LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -9649,8 +10173,8 @@ _LT_EOF + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -9780,7 +10304,13 @@ _LT_EOF + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9793,22 +10323,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +@@ -9820,7 +10357,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + else + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9833,22 +10376,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, +@@ -9892,21 +10442,64 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_from_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes=yes ++ # no search path for DLLs. ++ case $cc_basename in ++ cl*) ++ # Native MSVC ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ file_list_spec='@' ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ sed -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; ++ else ++ sed -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; ++ fi~ ++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ ++ linknames=' ++ # The linker will not automatically build a static lib if we build a DLL. ++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true' ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ # Don't use ranlib ++ old_postinstall_cmds='chmod 644 $oldlib' ++ postlink_cmds='lt_outputfile="@OUTPUT@"~ ++ lt_tool_outputfile="@TOOL_OUTPUT@"~ ++ case $lt_outputfile in ++ *.exe|*.EXE) ;; ++ *) ++ lt_outputfile="$lt_outputfile.exe" ++ lt_tool_outputfile="$lt_tool_outputfile.exe" ++ ;; ++ esac~ ++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then ++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; ++ $RM "$lt_outputfile.manifest"; ++ fi' ++ ;; ++ *) ++ # Assume MSVC wrapper ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ esac + ;; + + darwin* | rhapsody*) +@@ -9967,7 +10560,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no +@@ -9975,7 +10568,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux9*) + if test "$GCC" = yes; then +- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi +@@ -9991,7 +10584,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi +@@ -10015,10 +10608,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +@@ -10097,23 +10690,36 @@ fi + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ # This should be the same for all languages, so no per-tag cache variable. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 ++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } ++if test "${lt_cv_irix_exported_symbol+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-int foo(void) {} ++int foo (void) { return 0; } + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' +- ++ lt_cv_irix_exported_symbol=yes ++else ++ lt_cv_irix_exported_symbol=no + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +- LDFLAGS="$save_LDFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 ++$as_echo "$lt_cv_irix_exported_symbol" >&6; } ++ if test "$lt_cv_irix_exported_symbol" = yes; then ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' +@@ -10198,7 +10804,7 @@ rm -f core conftest.err conftest.$ac_objext \ + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' +@@ -10217,9 +10823,9 @@ rm -f core conftest.err conftest.$ac_objext \ + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' +- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) +@@ -10795,8 +11401,9 @@ cygwin* | mingw* | pw32* | cegcc*) + need_version=no + need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ case $GCC,$cc_basename in ++ yes,*) ++ # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +@@ -10829,13 +11436,71 @@ cygwin* | mingw* | pw32* | cegcc*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac ++ dynamic_linker='Win32 ld.exe' ++ ;; ++ ++ *,cl*) ++ # Native MSVC ++ libname_spec='$name' ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='${libname}.dll.lib' ++ ++ case $build_os in ++ mingw*) ++ sys_lib_search_path_spec= ++ lt_save_ifs=$IFS ++ IFS=';' ++ for lt_path in $LIB ++ do ++ IFS=$lt_save_ifs ++ # Let DOS variable expansion print the short 8.3 style file name. ++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` ++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" ++ done ++ IFS=$lt_save_ifs ++ # Convert to MSYS style. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \$[a-zA-Z]\$:| /\\1|g' -e 's|^ ||'` ++ ;; ++ cygwin*) ++ # Convert to unix form, then to dos form, then back to unix form ++ # but this time dos style (no spaces!) so that the unix form looks ++ # like /cygdrive/c/PROGRA~1:/cygdr... ++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` ++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` ++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ ;; ++ *) ++ sys_lib_search_path_spec="$LIB" ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # FIXME: find the short name or the path components, as spaces are ++ # common. (e.g. "Program Files" -> "PROGRA~1") ++ ;; ++ esac ++ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ dynamic_linker='Win32 link.exe' + ;; + + *) ++ # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ dynamic_linker='Win32 ld.exe' + ;; + esac +- dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +@@ -10927,7 +11592,7 @@ haiku*) + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes +- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib' ++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +@@ -11767,10 +12432,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -11873,10 +12538,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -12268,6 +12933,7 @@ $RM -r conftest* + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC ++ lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX +@@ -12285,6 +12951,7 @@ $RM -r conftest* + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} ++ CFLAGS=$CXXFLAGS + compiler=$CC + compiler_CXX=$CC + for cc_temp in $compiler""; do +@@ -12567,7 +13234,13 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie + allow_undefined_flag_CXX='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath__CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -12580,22 +13253,29 @@ main () + _ACEOF + if ac_fn_cxx_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath__CXX"; then ++ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath__CXX"; then ++ lt_cv_aix_libpath__CXX="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath__CXX ++fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + +@@ -12608,7 +13288,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + else + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath__CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -12621,22 +13307,29 @@ main () + _ACEOF + if ac_fn_cxx_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath__CXX"; then ++ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath__CXX"; then ++ lt_cv_aix_libpath__CXX="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath__CXX ++fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, +@@ -12679,29 +13372,75 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) +- # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec_CXX='-L$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' +- allow_undefined_flag_CXX=unsupported +- always_export_symbols_CXX=no +- enable_shared_with_static_runtimes_CXX=yes +- +- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- ld_shlibs_CXX=no +- fi +- ;; ++ case $GXX,$cc_basename in ++ ,cl* | no,cl*) ++ # Native MSVC ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec_CXX=' ' ++ allow_undefined_flag_CXX=unsupported ++ always_export_symbols_CXX=yes ++ file_list_spec_CXX='@' ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' ++ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ $SED -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; ++ else ++ $SED -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; ++ fi~ ++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ ++ linknames=' ++ # The linker will not automatically build a static lib if we build a DLL. ++ # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' ++ enable_shared_with_static_runtimes_CXX=yes ++ # Don't use ranlib ++ old_postinstall_cmds_CXX='chmod 644 $oldlib' ++ postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ ++ lt_tool_outputfile="@TOOL_OUTPUT@"~ ++ case $lt_outputfile in ++ *.exe|*.EXE) ;; ++ *) ++ lt_outputfile="$lt_outputfile.exe" ++ lt_tool_outputfile="$lt_tool_outputfile.exe" ++ ;; ++ esac~ ++ func_to_tool_file "$lt_outputfile"~ ++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then ++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; ++ $RM "$lt_outputfile.manifest"; ++ fi' ++ ;; ++ *) ++ # g++ ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec_CXX='-L$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' ++ allow_undefined_flag_CXX=unsupported ++ always_export_symbols_CXX=no ++ enable_shared_with_static_runtimes_CXX=yes ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; + darwin* | rhapsody*) + + +@@ -12807,7 +13546,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + ;; + *) + if test "$GXX" = yes; then +- archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no +@@ -12878,10 +13617,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) +- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) +- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi +@@ -12922,9 +13661,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' ++ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + link_all_deplibs_CXX=yes +@@ -12994,20 +13733,20 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + prelink_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ +- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' ++ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + old_archive_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ +- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ ++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + archive_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ +- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ +- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' +@@ -13202,7 +13941,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) +- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + +@@ -13248,7 +13987,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + solaris*) + case $cc_basename in +- CC*) ++ CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + archive_cmds_need_lc_CXX=yes + no_undefined_flag_CXX=' -zdefs' +@@ -13289,9 +14028,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + no_undefined_flag_CXX=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then +- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when +@@ -13426,6 +14165,13 @@ private: + }; + _LT_EOF + ++ ++_lt_libdeps_save_CFLAGS=$CFLAGS ++case "$CC $CFLAGS " in #( ++*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; ++*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; ++esac ++ + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +@@ -13439,7 +14185,7 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do +- case $p in ++ case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. +@@ -13448,13 +14194,22 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + test $p = "-R"; then + prev=$p + continue +- else +- prev= + fi + ++ # Expand the sysroot to ease extracting the directories later. ++ if test -z "$prev"; then ++ case $p in ++ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; ++ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; ++ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; ++ esac ++ fi ++ case $p in ++ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; ++ esac + if test "$pre_test_object_deps_done" = no; then +- case $p in +- -L* | -R*) ++ case ${prev} in ++ -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. +@@ -13474,8 +14229,10 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + postdeps_CXX="${postdeps_CXX} ${prev}${p}" + fi + fi ++ prev= + ;; + ++ *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. +@@ -13511,6 +14268,7 @@ else + fi + + $RM -f confest.$objext ++CFLAGS=$_lt_libdeps_save_CFLAGS + + # PORTME: override above test on systems where it is broken + case $host_os in +@@ -13546,7 +14304,7 @@ linux*) + + solaris*) + case $cc_basename in +- CC*) ++ CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as +@@ -13611,8 +14369,6 @@ fi + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX= + +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then +@@ -13717,6 +14473,11 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + ;; + esac + ;; ++ mingw* | cygwin* | os2* | pw32* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ++ ;; + dgux*) + case $cc_basename in + ec++*) +@@ -13869,7 +14630,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + ;; + solaris*) + case $cc_basename in +- CC*) ++ CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' +@@ -13934,10 +14695,17 @@ case $host_os in + lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" + ;; + esac +-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5 +-$as_echo "$lt_prog_compiler_pic_CXX" >&6; } +- + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 ++$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++if test "${lt_cv_prog_compiler_pic_CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 ++$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } ++lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX + + # + # Check to make sure the PIC flag actually works. +@@ -13995,6 +14763,8 @@ fi + + + ++ ++ + # + # Check to make sure the static flag actually works. + # +@@ -14172,6 +14942,7 @@ fi + $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + case $host_os in + aix[4-9]*) + # If we're using GNU nm, then we don't want the "-C" option. +@@ -14186,15 +14957,20 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie + ;; + pw32*) + export_symbols_cmds_CXX="$ltdll_cmds" +- ;; ++ ;; + cygwin* | mingw* | cegcc*) +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' +- ;; ++ case $cc_basename in ++ cl*) ;; ++ *) ++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' ++ exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' ++ ;; ++ esac ++ ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- ;; ++ ;; + esac +- exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 + $as_echo "$ld_shlibs_CXX" >&6; } +@@ -14457,8 +15233,9 @@ cygwin* | mingw* | pw32* | cegcc*) + need_version=no + need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ case $GCC,$cc_basename in ++ yes,*) ++ # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +@@ -14490,13 +15267,71 @@ cygwin* | mingw* | pw32* | cegcc*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac ++ dynamic_linker='Win32 ld.exe' ++ ;; ++ ++ *,cl*) ++ # Native MSVC ++ libname_spec='$name' ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='${libname}.dll.lib' ++ ++ case $build_os in ++ mingw*) ++ sys_lib_search_path_spec= ++ lt_save_ifs=$IFS ++ IFS=';' ++ for lt_path in $LIB ++ do ++ IFS=$lt_save_ifs ++ # Let DOS variable expansion print the short 8.3 style file name. ++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` ++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" ++ done ++ IFS=$lt_save_ifs ++ # Convert to MSYS style. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \$[a-zA-Z]\$:| /\\1|g' -e 's|^ ||'` ++ ;; ++ cygwin*) ++ # Convert to unix form, then to dos form, then back to unix form ++ # but this time dos style (no spaces!) so that the unix form looks ++ # like /cygdrive/c/PROGRA~1:/cygdr... ++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` ++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` ++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ ;; ++ *) ++ sys_lib_search_path_spec="$LIB" ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # FIXME: find the short name or the path components, as spaces are ++ # common. (e.g. "Program Files" -> "PROGRA~1") ++ ;; ++ esac ++ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ dynamic_linker='Win32 link.exe' + ;; + + *) ++ # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ dynamic_linker='Win32 ld.exe' + ;; + esac +- dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +@@ -14587,7 +15422,7 @@ haiku*) + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes +- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib' ++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +@@ -15046,6 +15881,7 @@ fi + fi # test -n "$compiler" + + CC=$lt_save_CC ++ CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC +@@ -17982,13 +18818,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' + lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' + lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' + lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' + reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' + reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' + OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' + deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' + file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' ++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' ++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' ++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' ++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' + AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' + AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' ++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' + STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' + RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' + old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +@@ -18003,14 +18846,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de + lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' ++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' ++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' + objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' + MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' + lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' + need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' ++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' + DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' + NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' + LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +@@ -18043,12 +18889,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q + hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' + inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' + link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`' + always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' + export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' + exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' + include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' + prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' ++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' + file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' + variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' + need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +@@ -18087,8 +18933,8 @@ old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote + compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`' + GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`' +-lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`' ++lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`' + lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`' + archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`' +@@ -18115,12 +18961,12 @@ hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_ + hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`' + inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`' + link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`' +-fix_srcfile_path_CXX='`$ECHO "$fix_srcfile_path_CXX" | $SED "$delay_single_quote_subst"`' + always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`' + export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`' + exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`' + include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`' + prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`' ++postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`' + file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`' + hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`' + compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`' +@@ -18158,8 +19004,13 @@ reload_flag \ + OBJDUMP \ + deplibs_check_method \ + file_magic_cmd \ ++file_magic_glob \ ++want_nocaseglob \ ++DLLTOOL \ ++sharedlib_from_linklib_cmd \ + AR \ + AR_FLAGS \ ++archiver_list_spec \ + STRIP \ + RANLIB \ + CC \ +@@ -18169,12 +19020,14 @@ lt_cv_sys_global_symbol_pipe \ + lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++nm_file_list_spec \ + lt_prog_compiler_no_builtin_flag \ +-lt_prog_compiler_wl \ + lt_prog_compiler_pic \ ++lt_prog_compiler_wl \ + lt_prog_compiler_static \ + lt_cv_prog_compiler_c_o \ + need_locks \ ++MANIFEST_TOOL \ + DSYMUTIL \ + NMEDIT \ + LIPO \ +@@ -18190,7 +19043,6 @@ no_undefined_flag \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ +-fix_srcfile_path \ + exclude_expsyms \ + include_expsyms \ + file_list_spec \ +@@ -18212,8 +19064,8 @@ LD_CXX \ + reload_flag_CXX \ + compiler_CXX \ + lt_prog_compiler_no_builtin_flag_CXX \ +-lt_prog_compiler_wl_CXX \ + lt_prog_compiler_pic_CXX \ ++lt_prog_compiler_wl_CXX \ + lt_prog_compiler_static_CXX \ + lt_cv_prog_compiler_c_o_CXX \ + export_dynamic_flag_spec_CXX \ +@@ -18225,7 +19077,6 @@ no_undefined_flag_CXX \ + hardcode_libdir_flag_spec_CXX \ + hardcode_libdir_flag_spec_ld_CXX \ + hardcode_libdir_separator_CXX \ +-fix_srcfile_path_CXX \ + exclude_expsyms_CXX \ + include_expsyms_CXX \ + file_list_spec_CXX \ +@@ -18259,6 +19110,7 @@ module_cmds \ + module_expsym_cmds \ + export_symbols_cmds \ + prelink_cmds \ ++postlink_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + finish_cmds \ +@@ -18273,7 +19125,8 @@ archive_expsym_cmds_CXX \ + module_cmds_CXX \ + module_expsym_cmds_CXX \ + export_symbols_cmds_CXX \ +-prelink_cmds_CXX; do ++prelink_cmds_CXX \ ++postlink_cmds_CXX; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" +@@ -19066,7 +19919,8 @@ $as_echo X"$file" | + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, ++# Inc. + # Written by Gordon Matzigkeit, 1996 + # + # This file is part of GNU Libtool. +@@ -19169,19 +20023,42 @@ SP2NL=$lt_lt_SP2NL + # turn newlines into spaces. + NL2SP=$lt_lt_NL2SP + ++# convert \$build file names to \$host format. ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++ ++# convert \$build files to toolchain format. ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++ + # An object symbol dumper. + OBJDUMP=$lt_OBJDUMP + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + +-# Command to use when deplibs_check_method == "file_magic". ++# Command to use when deplibs_check_method = "file_magic". + file_magic_cmd=$lt_file_magic_cmd + ++# How to find potential files when deplibs_check_method = "file_magic". ++file_magic_glob=$lt_file_magic_glob ++ ++# Find potential files using nocaseglob when deplibs_check_method = "file_magic". ++want_nocaseglob=$lt_want_nocaseglob ++ ++# DLL creation program. ++DLLTOOL=$lt_DLLTOOL ++ ++# Command to associate shared and link libraries. ++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd ++ + # The archiver. + AR=$lt_AR ++ ++# Flags to create an archive. + AR_FLAGS=$lt_AR_FLAGS + ++# How to feed a file listing to the archiver. ++archiver_list_spec=$lt_archiver_list_spec ++ + # A symbol stripping program. + STRIP=$lt_STRIP + +@@ -19211,6 +20088,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + # Transform the output of nm in a C name address pair when lib prefix is needed. + global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + ++# Specify filename containing input files for \$NM. ++nm_file_list_spec=$lt_nm_file_list_spec ++ ++# The root where to search for dependent libraries,and in which our libraries should be installed. ++lt_sysroot=$lt_sysroot ++ + # The name of the directory that contains temporary libtool files. + objdir=$objdir + +@@ -19220,6 +20103,9 @@ MAGIC_CMD=$MAGIC_CMD + # Must we lock files when doing compilation? + need_locks=$lt_need_locks + ++# Manifest tool. ++MANIFEST_TOOL=$lt_MANIFEST_TOOL ++ + # Tool to manipulate archived DWARF debug symbol files on Mac OS X. + DSYMUTIL=$lt_DSYMUTIL + +@@ -19334,12 +20220,12 @@ with_gcc=$GCC + # Compiler flag to turn off builtin functions. + no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl +- + # Additional compiler flags for building library objects. + pic_flag=$lt_lt_prog_compiler_pic + ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ + # Compiler flag to prevent dynamic linking. + link_static_flag=$lt_lt_prog_compiler_static + +@@ -19426,9 +20312,6 @@ inherit_rpath=$inherit_rpath + # Whether libtool must link a program against all its dependency libraries. + link_all_deplibs=$link_all_deplibs + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- + # Set to "yes" if exported symbols are required. + always_export_symbols=$always_export_symbols + +@@ -19444,6 +20327,9 @@ include_expsyms=$lt_include_expsyms + # Commands necessary for linking programs (against libraries) with templates. + prelink_cmds=$lt_prelink_cmds + ++# Commands necessary for finishing linking programs. ++postlink_cmds=$lt_postlink_cmds ++ + # Specify filename containing input files. + file_list_spec=$lt_file_list_spec + +@@ -19490,210 +20376,169 @@ ltmain="$ac_aux_dir/ltmain.sh" + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? +- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- case $xsi_shell in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result="${1##*/}" +-} +- +-# func_dirname_and_basename file append nondir_replacement +-# perform func_basename and func_dirname in a single function +-# call: +-# dirname: Compute the dirname of FILE. If nonempty, +-# add APPEND to the result, otherwise set result +-# to NONDIR_REPLACEMENT. +-# value returned in "$func_dirname_result" +-# basename: Compute filename of FILE. +-# value retuned in "$func_basename_result" +-# Implementation must be kept synchronized with func_dirname +-# and func_basename. For efficiency, we do not delegate to +-# those functions but instead duplicate the functionality here. +-func_dirname_and_basename () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +- func_basename_result="${1##*/}" +-} +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-func_stripname () +-{ +- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are +- # positional parameters, so assign one to ordinary parameter first. +- func_stripname_result=${3} +- func_stripname_result=${func_stripname_result#"${1}"} +- func_stripname_result=${func_stripname_result%"${2}"} +-} +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=${1%%=*} +- func_opt_split_arg=${1#*=} +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- case ${1} in +- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; +- *) func_lo2o_result=${1} ;; +- esac +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=${1%.*}.lo +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=$(( $* )) +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=${#1} +-} +- +-_LT_EOF +- ;; +- *) # Bourne compatible functions. +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- # Extract subdirectory from the argument. +- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` +- if test "X$func_dirname_result" = "X${1}"; then +- func_dirname_result="${3}" +- else +- func_dirname_result="$func_dirname_result${2}" +- fi +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result=`$ECHO "${1}" | $SED "$basename"` +-} +- +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-# func_strip_suffix prefix name +-func_stripname () +-{ +- case ${2} in +- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; +- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; +- esac +-} +- +-# sed scripts: +-my_sed_long_opt='1s/^$-[^=]*$=.*/\1/;q' +-my_sed_long_arg='1s/^-[^=]*=//' +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` +- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=`expr "$@"` +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +-} +- +-_LT_EOF +-esac +- +-case $lt_shell_append in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1+=\$2" +-} +-_LT_EOF +- ;; +- *) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1=\$$1\$2" +-} +- +-_LT_EOF +- ;; +- esac +- +- +- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || ++ sed '$q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ if test x"$xsi_shell" = xyes; then ++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ ++func_dirname ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_basename ()$/,/^} # func_basename /c\ ++func_basename ()\ ++{\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ ++func_dirname_and_basename ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ ++func_stripname ()\ ++{\ ++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ ++\ # positional parameters, so assign one to ordinary parameter first.\ ++\ func_stripname_result=${3}\ ++\ func_stripname_result=${func_stripname_result#"${1}"}\ ++\ func_stripname_result=${func_stripname_result%"${2}"}\ ++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ ++func_split_long_opt ()\ ++{\ ++\ func_split_long_opt_name=${1%%=*}\ ++\ func_split_long_opt_arg=${1#*=}\ ++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ ++func_split_short_opt ()\ ++{\ ++\ func_split_short_opt_arg=${1#??}\ ++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ ++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ ++func_lo2o ()\ ++{\ ++\ case ${1} in\ ++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ ++\ *) func_lo2o_result=${1} ;;\ ++\ esac\ ++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_xform ()$/,/^} # func_xform /c\ ++func_xform ()\ ++{\ ++ func_xform_result=${1%.*}.lo\ ++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_arith ()$/,/^} # func_arith /c\ ++func_arith ()\ ++{\ ++ func_arith_result=$(( $* ))\ ++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_len ()$/,/^} # func_len /c\ ++func_len ()\ ++{\ ++ func_len_result=${#1}\ ++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++fi ++ ++if test x"$lt_shell_append" = xyes; then ++ sed -e '/^func_append ()$/,/^} # func_append /c\ ++func_append ()\ ++{\ ++ eval "${1}+=\\${2}"\ ++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ ++func_append_quoted ()\ ++{\ ++\ func_quote_for_eval "${2}"\ ++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ ++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ # Save a `func_append' function call where possible by direct use of '+=' ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1+="%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++else ++ # Save a `func_append' function call even when '+=' is not available ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++fi ++ ++if test x"$_lt_function_replace_fail" = x":"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 ++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} ++fi ++ ++ ++ mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +@@ -19721,12 +20566,12 @@ with_gcc=$GCC_CXX + # Compiler flag to turn off builtin functions. + no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_CXX +- + # Additional compiler flags for building library objects. + pic_flag=$lt_lt_prog_compiler_pic_CXX + ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl_CXX ++ + # Compiler flag to prevent dynamic linking. + link_static_flag=$lt_lt_prog_compiler_static_CXX + +@@ -19813,9 +20658,6 @@ inherit_rpath=$inherit_rpath_CXX + # Whether libtool must link a program against all its dependency libraries. + link_all_deplibs=$link_all_deplibs_CXX + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path_CXX +- + # Set to "yes" if exported symbols are required. + always_export_symbols=$always_export_symbols_CXX + +@@ -19831,6 +20673,9 @@ include_expsyms=$lt_include_expsyms_CXX + # Commands necessary for linking programs (against libraries) with templates. + prelink_cmds=$lt_prelink_cmds_CXX + ++# Commands necessary for finishing linking programs. ++postlink_cmds=$lt_postlink_cmds_CXX ++ + # Specify filename containing input files. + file_list_spec=$lt_file_list_spec_CXX + +diff --git a/libtool.m4 b/libtool.m4 +index 24d13f3..e45fdc6 100644 +--- a/libtool.m4 ++++ b/libtool.m4 +@@ -1,7 +1,8 @@ + # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- + # + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, ++# Inc. + # Written by Gordon Matzigkeit, 1996 + # + # This file is free software; the Free Software Foundation gives +@@ -10,7 +11,8 @@ + + m4_define([_LT_COPYING], [dnl + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, ++# Inc. + # Written by Gordon Matzigkeit, 1996 + # + # This file is part of GNU Libtool. +@@ -37,7 +39,7 @@ m4_define([_LT_COPYING], [dnl + # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + ]) + +-# serial 56 LT_INIT ++# serial 57 LT_INIT + + + # LT_PREREQ(VERSION) +@@ -92,7 +94,8 @@ _LT_SET_OPTIONS([$0], [$1]) + LIBTOOL_DEPS="$ltmain" + + # Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++LIBTOOL='$(SHELL) $(top_builddir)' ++LIBTOOL="$LIBTOOL/${host_alias}-libtool" + AC_SUBST(LIBTOOL)dnl + + _LT_SETUP +@@ -166,10 +169,13 @@ _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl + dnl + m4_require([_LT_FILEUTILS_DEFAULTS])dnl + m4_require([_LT_CHECK_SHELL_FEATURES])dnl ++m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl + m4_require([_LT_CMD_RELOAD])dnl + m4_require([_LT_CHECK_MAGIC_METHOD])dnl ++m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl + m4_require([_LT_CMD_OLD_ARCHIVE])dnl + m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++m4_require([_LT_WITH_SYSROOT])dnl + + _LT_CONFIG_LIBTOOL_INIT([ + # See if we are running on zsh, and set the options which allow our +@@ -199,7 +205,7 @@ aix3*) + esac + + # Global variables: +-ofile=libtool ++ofile=${host_alias}-libtool + can_build_shared=yes + + # All known linkers require a `.a' archive for static linking (except MSVC, +@@ -632,7 +638,7 @@ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl + m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) + configured by $[0], generated by m4_PACKAGE_STRING. + +-Copyright (C) 2009 Free Software Foundation, Inc. ++Copyright (C) 2010 Free Software Foundation, Inc. + This config.lt script is free software; the Free Software Foundation + gives unlimited permision to copy, distribute and modify it." + +@@ -746,15 +752,12 @@ _LT_EOF + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? +- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) ++ sed '$q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) + +- _LT_PROG_XSI_SHELLFNS ++ _LT_PROG_REPLACE_SHELLFNS + +- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || ++ mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + ], +@@ -980,6 +983,8 @@ _LT_EOF + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD ++ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD ++ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF + int main() { return 0;} + _LT_EOF +@@ -1069,30 +1074,41 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES], + fi + ]) + +-# _LT_SYS_MODULE_PATH_AIX +-# ----------------------- ++# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) ++# ---------------------------------- + # Links a minimal program and checks the executable + # for the system default hardcoded library path. In most cases, + # this is /usr/lib:/lib, but when the MPI compilers are used + # the location of the communication and MPI libs are included too. + # If we don't find anything, use the default library path according + # to the aix ld manual. ++# Store the results from the different compilers for each TAGNAME. ++# Allow to override them for all tags through lt_cv_aix_libpath. + m4_defun([_LT_SYS_MODULE_PATH_AIX], + [m4_require([_LT_DECL_SED])dnl +-AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi],[]) +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], ++ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ ++ lt_aix_libpath_sed='[ ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }]' ++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then ++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi],[]) ++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then ++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" ++ fi ++ ]) ++ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) ++fi + ])# _LT_SYS_MODULE_PATH_AIX + + +@@ -1117,7 +1133,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + + AC_MSG_CHECKING([how to print strings]) + # Test print first, because it will be a builtin if present. +-if test "X`print -r -- -n 2>/dev/null`" = X-n && \ ++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' + elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then +@@ -1161,6 +1177,39 @@ _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) + ])# _LT_PROG_ECHO_BACKSLASH + + ++# _LT_WITH_SYSROOT ++# ---------------- ++AC_DEFUN([_LT_WITH_SYSROOT], ++[AC_MSG_CHECKING([for sysroot]) ++AC_ARG_WITH([libtool-sysroot], ++[ --with-libtool-sysroot[=DIR] Search for dependent libraries within DIR ++ (or the compiler's sysroot if not specified).], ++[], [with_libtool_sysroot=no]) ++ ++dnl lt_sysroot will always be passed unquoted. We quote it here ++dnl in case the user passed a directory name. ++lt_sysroot= ++case ${with_libtool_sysroot} in #( ++ yes) ++ if test "$GCC" = yes; then ++ lt_sysroot=`$CC --print-sysroot 2>/dev/null` ++ fi ++ ;; #( ++ /*) ++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"` ++ ;; #( ++ no|'') ++ ;; #( ++ *) ++ AC_MSG_RESULT([${with_libtool_sysroot}]) ++ AC_MSG_ERROR([The sysroot must be an absolute path.]) ++ ;; ++esac ++ ++ AC_MSG_RESULT([${lt_sysroot:-no}]) ++_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl ++[dependent libraries, and in which our libraries should be installed.])]) ++ + # _LT_ENABLE_LOCK + # --------------- + m4_defun([_LT_ENABLE_LOCK], +@@ -1320,14 +1369,47 @@ need_locks="$enable_libtool_lock" + ])# _LT_ENABLE_LOCK + + ++# _LT_PROG_AR ++# ----------- ++m4_defun([_LT_PROG_AR], ++[AC_CHECK_TOOLS(AR, [ar], false) ++: ${AR=ar} ++: ${AR_FLAGS=cru} ++_LT_DECL([], [AR], [1], [The archiver]) ++_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) ++ ++AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], ++ [lt_cv_ar_at_file=no ++ AC_COMPILE_IFELSE([AC_LANG_PROGRAM], ++ [echo conftest.$ac_objext > conftest.lst ++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' ++ AC_TRY_EVAL([lt_ar_try]) ++ if test "$ac_status" -eq 0; then ++ # Ensure the archiver fails upon bogus file names. ++ rm -f conftest.$ac_objext libconftest.a ++ AC_TRY_EVAL([lt_ar_try]) ++ if test "$ac_status" -ne 0; then ++ lt_cv_ar_at_file=@ ++ fi ++ fi ++ rm -f conftest.* libconftest.a ++ ]) ++ ]) ++ ++if test "x$lt_cv_ar_at_file" = xno; then ++ archiver_list_spec= ++else ++ archiver_list_spec=$lt_cv_ar_at_file ++fi ++_LT_DECL([], [archiver_list_spec], [1], ++ [How to feed a file listing to the archiver]) ++])# _LT_PROG_AR ++ ++ + # _LT_CMD_OLD_ARCHIVE + # ------------------- + m4_defun([_LT_CMD_OLD_ARCHIVE], +-[AC_CHECK_TOOL(AR, ar, false) +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-_LT_DECL([], [AR], [1], [The archiver]) +-_LT_DECL([], [AR_FLAGS], [1]) ++[_LT_PROG_AR + + AC_CHECK_TOOL(STRIP, strip, :) + test -z "$STRIP" && STRIP=: +@@ -1623,7 +1705,7 @@ else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +-[#line __oline__ "configure" ++[#line $LINENO "configure" + #include "confdefs.h" + + #if HAVE_DLFCN_H +@@ -1667,10 +1749,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -2210,8 +2292,9 @@ cygwin* | mingw* | pw32* | cegcc*) + need_version=no + need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ case $GCC,$cc_basename in ++ yes,*) ++ # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +@@ -2244,13 +2327,71 @@ m4_if([$1], [],[ + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac ++ dynamic_linker='Win32 ld.exe' ++ ;; ++ ++ *,cl*) ++ # Native MSVC ++ libname_spec='$name' ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='${libname}.dll.lib' ++ ++ case $build_os in ++ mingw*) ++ sys_lib_search_path_spec= ++ lt_save_ifs=$IFS ++ IFS=';' ++ for lt_path in $LIB ++ do ++ IFS=$lt_save_ifs ++ # Let DOS variable expansion print the short 8.3 style file name. ++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` ++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" ++ done ++ IFS=$lt_save_ifs ++ # Convert to MSYS style. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \$[[a-zA-Z]]\$:| /\\1|g' -e 's|^ ||'` ++ ;; ++ cygwin*) ++ # Convert to unix form, then to dos form, then back to unix form ++ # but this time dos style (no spaces!) so that the unix form looks ++ # like /cygdrive/c/PROGRA~1:/cygdr... ++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` ++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` ++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ ;; ++ *) ++ sys_lib_search_path_spec="$LIB" ++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then ++ # It is most probably a Windows format PATH. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # FIXME: find the short name or the path components, as spaces are ++ # common. (e.g. "Program Files" -> "PROGRA~1") ++ ;; ++ esac ++ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ dynamic_linker='Win32 link.exe' + ;; + + *) ++ # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ dynamic_linker='Win32 ld.exe' + ;; + esac +- dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +@@ -2342,7 +2483,7 @@ haiku*) + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes +- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib' ++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +@@ -2950,6 +3091,11 @@ case $reload_flag in + esac + reload_cmds='$LD$reload_flag -o $output$reload_objs' + case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ if test "$GCC" != yes; then ++ reload_cmds=false ++ fi ++ ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' +@@ -3016,7 +3162,8 @@ mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ # Keep this pattern in sync with the one in func_win32_libid. ++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; +@@ -3167,6 +3314,21 @@ tpf*) + ;; + esac + ]) ++ ++file_magic_glob= ++want_nocaseglob=no ++if test "$build" = "$host"; then ++ case $host_os in ++ mingw* | pw32*) ++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then ++ want_nocaseglob=yes ++ else ++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/$..$/s\/[[\1]]\/[[\1]]\/g;/g"` ++ fi ++ ;; ++ esac ++fi ++ + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -3174,7 +3336,11 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown + _LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) + _LT_DECL([], [file_magic_cmd], [1], +- [Command to use when deplibs_check_method == "file_magic"]) ++ [Command to use when deplibs_check_method = "file_magic"]) ++_LT_DECL([], [file_magic_glob], [1], ++ [How to find potential files when deplibs_check_method = "file_magic"]) ++_LT_DECL([], [want_nocaseglob], [1], ++ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) + ])# _LT_CHECK_MAGIC_METHOD + + +@@ -3277,6 +3443,67 @@ dnl aclocal-1.4 backwards compatibility: + dnl AC_DEFUN([AM_PROG_NM], []) + dnl AC_DEFUN([AC_PROG_NM], []) + ++# _LT_CHECK_SHAREDLIB_FROM_LINKLIB ++# -------------------------------- ++# how to determine the name of the shared library ++# associated with a specific link library. ++# -- PORTME fill in with the dynamic library characteristics ++m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], ++[m4_require([_LT_DECL_EGREP]) ++m4_require([_LT_DECL_OBJDUMP]) ++m4_require([_LT_DECL_DLLTOOL]) ++AC_CACHE_CHECK([how to associate runtime and link libraries], ++lt_cv_sharedlib_from_linklib_cmd, ++[lt_cv_sharedlib_from_linklib_cmd='unknown' ++ ++case $host_os in ++cygwin* | mingw* | pw32* | cegcc*) ++ # two different shell functions defined in ltmain.sh ++ # decide which to use based on capabilities of $DLLTOOL ++ case `$DLLTOOL --help 2>&1` in ++ *--identify-strict*) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ++ ;; ++ *) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ++ ;; ++ esac ++ ;; ++*) ++ # fallback: assume linklib IS sharedlib ++ lt_cv_sharedlib_from_linklib_cmd="$ECHO" ++ ;; ++esac ++]) ++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd ++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO ++ ++_LT_DECL([], [sharedlib_from_linklib_cmd], [1], ++ [Command to associate shared and link libraries]) ++])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB ++ ++ ++# _LT_PATH_MANIFEST_TOOL ++# ---------------------- ++# locate the manifest tool ++m4_defun([_LT_PATH_MANIFEST_TOOL], ++[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) ++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt ++AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], ++ [lt_cv_path_mainfest_tool=no ++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD ++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then ++ lt_cv_path_mainfest_tool=yes ++ fi ++ rm -f conftest*]) ++if test "x$lt_cv_path_mainfest_tool" != xyes; then ++ MANIFEST_TOOL=: ++fi ++_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ++])# _LT_PATH_MANIFEST_TOOL ++ + + # LT_LIB_M + # -------- +@@ -3403,8 +3630,8 @@ esac + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" + + # Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p'" +-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $lib[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"lib\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[[^ ]]*$[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $lib[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"lib\2\", (void *) \&\2},/p'" + + # Handle CRLF in mingw tool chain + opt_cr= +@@ -3440,6 +3667,7 @@ for ac_symprfx in "" "_"; do + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]$$symcode$symcode*$[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi ++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -3473,6 +3701,18 @@ _LT_EOF + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext ++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ ++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) ++/* DATA imports from DLLs on WIN32 con't be const, because runtime ++ relocations are performed -- see ld's documentation on pseudo-relocs. */ ++# define LT@&t@_DLSYM_CONST ++#elif defined(__osf__) ++/* This system does not cope well with relocations in const data. */ ++# define LT@&t@_DLSYM_CONST ++#else ++# define LT@&t@_DLSYM_CONST const ++#endif ++ + #ifdef __cplusplus + extern "C" { + #endif +@@ -3484,7 +3724,7 @@ _LT_EOF + cat <<_LT_EOF >> conftest.$ac_ext + + /* The mapping between symbol names and symbols. */ +-const struct { ++LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; + } +@@ -3510,15 +3750,15 @@ static const void *lt_preloaded_setup() { + _LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" ++ lt_globsym_save_LIBS=$LIBS ++ lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" ++ LIBS=$lt_globsym_save_LIBS ++ CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi +@@ -3551,6 +3791,13 @@ else + AC_MSG_RESULT(ok) + fi + ++# Response file support. ++if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ nm_file_list_spec='@' ++elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then ++ nm_file_list_spec='@' ++fi ++ + _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) + _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], +@@ -3561,6 +3808,8 @@ _LT_DECL([global_symbol_to_c_name_address], + _LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) ++_LT_DECL([], [nm_file_list_spec], [1], ++ [Specify filename containing input files for $NM]) + ]) # _LT_CMD_GLOBAL_SYMBOLS + + +@@ -3572,7 +3821,6 @@ _LT_TAGVAR(lt_prog_compiler_wl, $1)= + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)= + +-AC_MSG_CHECKING([for $compiler option to produce PIC]) + m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then +@@ -3678,6 +3926,12 @@ m4_if([$1], [CXX], [ + ;; + esac + ;; ++ mingw* | cygwin* | os2* | pw32* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; + dgux*) + case $cc_basename in + ec++*) +@@ -3830,7 +4084,7 @@ m4_if([$1], [CXX], [ + ;; + solaris*) + case $cc_basename in +- CC*) ++ CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +@@ -4053,6 +4307,12 @@ m4_if([$1], [CXX], [ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; ++ nagfor*) ++ # NAG Fortran compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) +@@ -4115,7 +4375,7 @@ m4_if([$1], [CXX], [ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in +- f77* | f90* | f95*) ++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; +@@ -4172,9 +4432,11 @@ case $host_os in + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; + esac +-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], +- [How to pass a linker flag through the compiler]) ++ ++AC_CACHE_CHECK([for $compiler option to produce PIC], ++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], ++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) ++_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + + # + # Check to make sure the PIC flag actually works. +@@ -4193,6 +4455,8 @@ fi + _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + ++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], ++ [How to pass a linker flag through the compiler]) + # + # Check to make sure the static flag actually works. + # +@@ -4213,6 +4477,7 @@ _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + m4_defun([_LT_LINKER_SHLIBS], + [AC_REQUIRE([LT_PATH_LD])dnl + AC_REQUIRE([LT_PATH_NM])dnl ++m4_require([_LT_PATH_MANIFEST_TOOL])dnl + m4_require([_LT_FILEUTILS_DEFAULTS])dnl + m4_require([_LT_DECL_EGREP])dnl + m4_require([_LT_DECL_SED])dnl +@@ -4221,6 +4486,7 @@ m4_require([_LT_TAG_COMPILER])dnl + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. +@@ -4235,15 +4501,20 @@ m4_if([$1], [CXX], [ + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" +- ;; ++ ;; + cygwin* | mingw* | cegcc*) +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__$[[^ ]]*$[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' +- ;; ++ case $cc_basename in ++ cl*) ;; ++ *) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/;s/^.*[[ ]]__nm__$[[^ ]]*$[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] ++ ;; ++ esac ++ ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- ;; ++ ;; + esac +- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + ], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= +@@ -4411,7 +4682,8 @@ _LT_EOF + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/;s/^.*[[ ]]__nm__$[[^ ]]*$[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +@@ -4510,12 +4782,12 @@ _LT_EOF + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' +- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ +- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac +@@ -4529,8 +4801,8 @@ _LT_EOF + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + +@@ -4548,8 +4820,8 @@ _LT_EOF + + _LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +@@ -4595,8 +4867,8 @@ _LT_EOF + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +@@ -4726,7 +4998,7 @@ _LT_EOF + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. +- _LT_SYS_MODULE_PATH_AIX ++ _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else +@@ -4737,7 +5009,7 @@ _LT_EOF + else + # Determine the default libpath from the value encoded in an + # empty executable. +- _LT_SYS_MODULE_PATH_AIX ++ _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. +@@ -4781,20 +5053,63 @@ _LT_EOF + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' +- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' +- # FIXME: Should let the user specify the lib program. +- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' +- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' +- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ case $cc_basename in ++ cl*) ++ # Native MSVC ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='@' ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ sed -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; ++ else ++ sed -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; ++ fi~ ++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ ++ linknames=' ++ # The linker will not automatically build a static lib if we build a DLL. ++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ++ # Don't use ranlib ++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' ++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ ++ lt_tool_outputfile="@TOOL_OUTPUT@"~ ++ case $lt_outputfile in ++ *.exe|*.EXE) ;; ++ *) ++ lt_outputfile="$lt_outputfile.exe" ++ lt_tool_outputfile="$lt_tool_outputfile.exe" ++ ;; ++ esac~ ++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then ++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; ++ $RM "$lt_outputfile.manifest"; ++ fi' ++ ;; ++ *) ++ # Assume MSVC wrapper ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' ++ # FIXME: Should let the user specify the lib program. ++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ;; ++ esac + ;; + + darwin* | rhapsody*) +@@ -4828,7 +5143,7 @@ _LT_EOF + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +@@ -4836,7 +5151,7 @@ _LT_EOF + + hpux9*) + if test "$GCC" = yes; then +- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi +@@ -4852,7 +5167,7 @@ _LT_EOF + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi +@@ -4876,10 +5191,10 @@ _LT_EOF + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +@@ -4926,16 +5241,31 @@ _LT_EOF + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" +- AC_LINK_IFELSE(int foo(void) {}, +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' +- ) +- LDFLAGS="$save_LDFLAGS" ++ # This should be the same for all languages, so no per-tag cache variable. ++ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], ++ [lt_cv_irix_exported_symbol], ++ [save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ AC_LINK_IFELSE( ++ [AC_LANG_SOURCE( ++ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], ++ [C++], [[int foo (void) { return 0; }]], ++ [Fortran 77], [[ ++ subroutine foo ++ end]], ++ [Fortran], [[ ++ subroutine foo ++ end]])])], ++ [lt_cv_irix_exported_symbol=yes], ++ [lt_cv_irix_exported_symbol=no]) ++ LDFLAGS="$save_LDFLAGS"]) ++ if test "$lt_cv_irix_exported_symbol" = yes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ fi + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' +@@ -5020,7 +5350,7 @@ _LT_EOF + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +@@ -5039,9 +5369,9 @@ _LT_EOF + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) +@@ -5313,8 +5643,6 @@ _LT_TAGDECL([], [inherit_rpath], [0], + to runtime path list]) + _LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +-_LT_TAGDECL([], [fix_srcfile_path], [1], +- [Fix the shell variable $srcfile for the compiler]) + _LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) + _LT_TAGDECL([], [export_symbols_cmds], [2], +@@ -5325,6 +5653,8 @@ _LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) + _LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) ++_LT_TAGDECL([], [postlink_cmds], [2], ++ [Commands necessary for finishing linking programs]) + _LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) + dnl FIXME: Not yet implemented +@@ -5426,6 +5756,7 @@ CC="$lt_save_CC" + m4_defun([_LT_LANG_CXX_CONFIG], + [m4_require([_LT_FILEUTILS_DEFAULTS])dnl + m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_PATH_MANIFEST_TOOL])dnl + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then +@@ -5487,6 +5818,7 @@ if test "$_lt_caught_CXX_error" != yes; then + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC ++ lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX +@@ -5504,6 +5836,7 @@ if test "$_lt_caught_CXX_error" != yes; then + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} ++ CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) +@@ -5667,7 +6000,7 @@ if test "$_lt_caught_CXX_error" != yes; then + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. +- _LT_SYS_MODULE_PATH_AIX ++ _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +@@ -5679,7 +6012,7 @@ if test "$_lt_caught_CXX_error" != yes; then + else + # Determine the default libpath from the value encoded in an + # empty executable. +- _LT_SYS_MODULE_PATH_AIX ++ _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. +@@ -5721,29 +6054,75 @@ if test "$_lt_caught_CXX_error" != yes; then + ;; + + cygwin* | mingw* | pw32* | cegcc*) +- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, +- # as there is no search path for DLLs. +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' +- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_TAGVAR(always_export_symbols, $1)=no +- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- +- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++ case $GXX,$cc_basename in ++ ,cl* | no,cl*) ++ # Native MSVC ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='@' ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ $SED -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; ++ else ++ $SED -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; ++ fi~ ++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ ++ linknames=' ++ # The linker will not automatically build a static lib if we build a DLL. ++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ # Don't use ranlib ++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' ++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ ++ lt_tool_outputfile="@TOOL_OUTPUT@"~ ++ case $lt_outputfile in ++ *.exe|*.EXE) ;; ++ *) ++ lt_outputfile="$lt_outputfile.exe" ++ lt_tool_outputfile="$lt_tool_outputfile.exe" ++ ;; ++ esac~ ++ func_to_tool_file "$lt_outputfile"~ ++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then ++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; ++ $RM "$lt_outputfile.manifest"; ++ fi' ++ ;; ++ *) ++ # g++ ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; +@@ -5818,7 +6197,7 @@ if test "$_lt_caught_CXX_error" != yes; then + ;; + *) + if test "$GXX" = yes; then +- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no +@@ -5889,10 +6268,10 @@ if test "$_lt_caught_CXX_error" != yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi +@@ -5933,9 +6312,9 @@ if test "$_lt_caught_CXX_error" != yes; then + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes +@@ -6005,20 +6384,20 @@ if test "$_lt_caught_CXX_error" != yes; then + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ +- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' ++ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ +- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ ++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ +- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ +- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' +@@ -6213,7 +6592,7 @@ if test "$_lt_caught_CXX_error" != yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + +@@ -6259,7 +6638,7 @@ if test "$_lt_caught_CXX_error" != yes; then + + solaris*) + case $cc_basename in +- CC*) ++ CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' +@@ -6300,9 +6679,9 @@ if test "$_lt_caught_CXX_error" != yes; then + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when +@@ -6431,6 +6810,7 @@ if test "$_lt_caught_CXX_error" != yes; then + fi # test -n "$compiler" + + CC=$lt_save_CC ++ CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC +@@ -6445,6 +6825,29 @@ AC_LANG_POP + ])# _LT_LANG_CXX_CONFIG + + ++# _LT_FUNC_STRIPNAME_CNF ++# ---------------------- ++# func_stripname_cnf prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# ++# This function is identical to the (non-XSI) version of func_stripname, ++# except this one can be used by m4 code that may be executed by configure, ++# rather than the libtool script. ++m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl ++AC_REQUIRE([_LT_DECL_SED]) ++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) ++func_stripname_cnf () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; ++ esac ++} # func_stripname_cnf ++])# _LT_FUNC_STRIPNAME_CNF ++ + # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) + # --------------------------------- + # Figure out "hidden" library dependencies from verbose +@@ -6453,6 +6856,7 @@ AC_LANG_POP + # objects, libraries and library flags. + m4_defun([_LT_SYS_HIDDEN_LIBDEPS], + [m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl + # Dependencies to place before and after the object being linked: + _LT_TAGVAR(predep_objects, $1)= + _LT_TAGVAR(postdep_objects, $1)= +@@ -6503,6 +6907,13 @@ public class foo { + }; + _LT_EOF + ]) ++ ++_lt_libdeps_save_CFLAGS=$CFLAGS ++case "$CC $CFLAGS " in #( ++*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; ++*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; ++esac ++ + dnl Parse the compiler output and extract the necessary + dnl objects, libraries and library flags. + if AC_TRY_EVAL(ac_compile); then +@@ -6514,7 +6925,7 @@ if AC_TRY_EVAL(ac_compile); then + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do +- case $p in ++ case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. +@@ -6523,13 +6934,22 @@ if AC_TRY_EVAL(ac_compile); then + test $p = "-R"; then + prev=$p + continue +- else +- prev= + fi + ++ # Expand the sysroot to ease extracting the directories later. ++ if test -z "$prev"; then ++ case $p in ++ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; ++ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; ++ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; ++ esac ++ fi ++ case $p in ++ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; ++ esac + if test "$pre_test_object_deps_done" = no; then +- case $p in +- -L* | -R*) ++ case ${prev} in ++ -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. +@@ -6549,8 +6969,10 @@ if AC_TRY_EVAL(ac_compile); then + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi ++ prev= + ;; + ++ *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. +@@ -6586,6 +7008,7 @@ else + fi + + $RM -f confest.$objext ++CFLAGS=$_lt_libdeps_save_CFLAGS + + # PORTME: override above test on systems where it is broken + m4_if([$1], [CXX], +@@ -6622,7 +7045,7 @@ linux*) + + solaris*) + case $cc_basename in +- CC*) ++ CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as +@@ -6735,7 +7158,9 @@ if test "$_lt_disable_F77" != yes; then + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC ++ lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} ++ CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) +@@ -6789,6 +7214,7 @@ if test "$_lt_disable_F77" != yes; then + + GCC=$lt_save_GCC + CC="$lt_save_CC" ++ CFLAGS="$lt_save_CFLAGS" + fi # test "$_lt_disable_F77" != yes + + AC_LANG_POP +@@ -6865,7 +7291,9 @@ if test "$_lt_disable_FC" != yes; then + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC ++ lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} ++ CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + +@@ -6921,7 +7349,8 @@ if test "$_lt_disable_FC" != yes; then + fi # test -n "$compiler" + + GCC=$lt_save_GCC +- CC="$lt_save_CC" ++ CC=$lt_save_CC ++ CFLAGS=$lt_save_CFLAGS + fi # test "$_lt_disable_FC" != yes + + AC_LANG_POP +@@ -6958,10 +7387,12 @@ _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. +-lt_save_CC="$CC" ++lt_save_CC=$CC ++lt_save_CFLAGS=$CFLAGS + lt_save_GCC=$GCC + GCC=yes + CC=${GCJ-"gcj"} ++CFLAGS=$GCJFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_TAGVAR(LD, $1)="$LD" +@@ -6992,7 +7423,8 @@ fi + AC_LANG_RESTORE + + GCC=$lt_save_GCC +-CC="$lt_save_CC" ++CC=$lt_save_CC ++CFLAGS=$lt_save_CFLAGS + ])# _LT_LANG_GCJ_CONFIG + + +@@ -7027,9 +7459,11 @@ _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" ++lt_save_CFLAGS=$CFLAGS + lt_save_GCC=$GCC + GCC= + CC=${RC-"windres"} ++CFLAGS= + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) +@@ -7042,7 +7476,8 @@ fi + + GCC=$lt_save_GCC + AC_LANG_RESTORE +-CC="$lt_save_CC" ++CC=$lt_save_CC ++CFLAGS=$lt_save_CFLAGS + ])# _LT_LANG_RC_CONFIG + + +@@ -7101,6 +7536,15 @@ _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) + AC_SUBST([OBJDUMP]) + ]) + ++# _LT_DECL_DLLTOOL ++# ---------------- ++# Ensure DLLTOOL variable is set. ++m4_defun([_LT_DECL_DLLTOOL], ++[AC_CHECK_TOOL(DLLTOOL, dlltool, false) ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) ++AC_SUBST([DLLTOOL]) ++]) + + # _LT_DECL_SED + # ------------ +@@ -7194,8 +7638,8 @@ m4_defun([_LT_CHECK_SHELL_FEATURES], + # Try some XSI features + xsi_shell=no + ( _lt_dummy="a/b/c" +- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ +- = c,a/b,, \ ++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +@@ -7234,206 +7678,162 @@ _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl + ])# _LT_CHECK_SHELL_FEATURES + + +-# _LT_PROG_XSI_SHELLFNS +-# --------------------- +-# Bourne and XSI compatible variants of some useful shell functions. +-m4_defun([_LT_PROG_XSI_SHELLFNS], +-[case $xsi_shell in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result="${1##*/}" +-} +- +-# func_dirname_and_basename file append nondir_replacement +-# perform func_basename and func_dirname in a single function +-# call: +-# dirname: Compute the dirname of FILE. If nonempty, +-# add APPEND to the result, otherwise set result +-# to NONDIR_REPLACEMENT. +-# value returned in "$func_dirname_result" +-# basename: Compute filename of FILE. +-# value retuned in "$func_basename_result" +-# Implementation must be kept synchronized with func_dirname +-# and func_basename. For efficiency, we do not delegate to +-# those functions but instead duplicate the functionality here. +-func_dirname_and_basename () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +- func_basename_result="${1##*/}" +-} +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-func_stripname () +-{ +- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are +- # positional parameters, so assign one to ordinary parameter first. +- func_stripname_result=${3} +- func_stripname_result=${func_stripname_result#"${1}"} +- func_stripname_result=${func_stripname_result%"${2}"} +-} +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=${1%%=*} +- func_opt_split_arg=${1#*=} +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- case ${1} in +- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; +- *) func_lo2o_result=${1} ;; +- esac +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=${1%.*}.lo +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=$(( $[*] )) +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=${#1} +-} ++# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) ++# ------------------------------------------------------ ++# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and ++# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. ++m4_defun([_LT_PROG_FUNCTION_REPLACE], ++[dnl { ++sed -e '/^$1 ()$/,/^} # $1 /c\ ++$1 ()\ ++{\ ++m4_bpatsubsts([$2], [$], [\\], [^$[ ]$], [\\\1]) ++} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++]) + +-_LT_EOF +- ;; +- *) # Bourne compatible functions. +- cat << \_LT_EOF >> "$cfgfile" + +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- # Extract subdirectory from the argument. +- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` +- if test "X$func_dirname_result" = "X${1}"; then +- func_dirname_result="${3}" +- else +- func_dirname_result="$func_dirname_result${2}" +- fi +-} ++# _LT_PROG_REPLACE_SHELLFNS ++# ------------------------- ++# Replace existing portable implementations of several shell functions with ++# equivalent extended shell implementations where those features are available.. ++m4_defun([_LT_PROG_REPLACE_SHELLFNS], ++[if test x"$xsi_shell" = xyes; then ++ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac]) ++ ++ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl ++ func_basename_result="${1##*/}"]) ++ ++ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}"]) + +-# func_basename file +-func_basename () +-{ +- func_basename_result=`$ECHO "${1}" | $SED "$basename"` +-} ++ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"}]) + +-dnl func_dirname_and_basename +-dnl A portable version of this function is already defined in general.m4sh +-dnl so there is no need for it here. ++ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl ++ func_split_long_opt_name=${1%%=*} ++ func_split_long_opt_arg=${1#*=}]) + +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-# func_strip_suffix prefix name +-func_stripname () +-{ +- case ${2} in +- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; +- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; +- esac +-} ++ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl ++ func_split_short_opt_arg=${1#??} ++ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) + +-# sed scripts: +-my_sed_long_opt='1s/^$-[[^=]]*$=.*/\1/;q' +-my_sed_long_arg='1s/^-[[^=]]*=//' ++ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac]) + +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` +- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +-} ++ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) + +-# func_lo2o object +-func_lo2o () +-{ +- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +-} ++ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) + +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=`$ECHO "${1}" | $SED 's/\.[[^.]]*$/.lo/'` +-} ++ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) ++fi + +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=`expr "$[@]"` +-} ++if test x"$lt_shell_append" = xyes; then ++ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) + +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` +-} ++ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl ++ func_quote_for_eval "${2}" ++dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ ++ eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) + +-_LT_EOF +-esac ++ # Save a `func_append' function call where possible by direct use of '+=' ++ sed -e 's%func_append $[[a-zA-Z_]]\{1,\}$ "%\1+="%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++else ++ # Save a `func_append' function call even when '+=' is not available ++ sed -e 's%func_append $[[a-zA-Z_]]\{1,\}$ "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++fi + +-case $lt_shell_append in +- yes) +- cat << \_LT_EOF >> "$cfgfile" ++if test x"$_lt_function_replace_fail" = x":"; then ++ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) ++fi ++]) + +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$[1]+=\$[2]" +-} +-_LT_EOF ++# _LT_PATH_CONVERSION_FUNCTIONS ++# ----------------------------- ++# Determine which file name conversion functions should be used by ++# func_to_host_file (and, implicitly, by func_to_host_path). These are needed ++# for certain cross-compile configurations and native mingw. ++m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++AC_MSG_CHECKING([how to convert $build file names to $host format]) ++AC_CACHE_VAL(lt_cv_to_host_file_cmd, ++[case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ++ ;; ++ esac + ;; +- *) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$[1]=\$$[1]\$[2]" +-} +- +-_LT_EOF ++ *-*-cygwin* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ++ ;; ++ esac + ;; +- esac ++ * ) # unhandled hosts (and "normal" native builds) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++esac ++]) ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) ++_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], ++ [0], [convert $build file names to $host format])dnl ++ ++AC_MSG_CHECKING([how to convert $build file names to toolchain format]) ++AC_CACHE_VAL(lt_cv_to_tool_file_cmd, ++[#assume ordinary cross tools, or native build. ++lt_cv_to_tool_file_cmd=func_convert_file_noop ++case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ esac ++ ;; ++esac + ]) ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) ++_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], ++ [0], [convert $build files to toolchain format])dnl ++])# _LT_PATH_CONVERSION_FUNCTIONS +diff --git a/ltmain.sh b/ltmain.sh +index 9503ec8..70e856e 100644 +--- a/ltmain.sh ++++ b/ltmain.sh +@@ -1,10 +1,9 @@ +-# Generated from ltmain.m4sh. + +-# libtool (GNU libtool 1.3134 2009-11-29) 2.2.7a ++# libtool (GNU libtool) 2.4 + # Written by Gordon Matzigkeit <gord(a)gnu.ai.mit.edu>, 1996 + + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +-# 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2007, 2008, 2009, 2010 Free Software Foundation, Inc. + # This is free software; see the source for copying conditions. There is NO + # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +@@ -38,7 +37,6 @@ + # -n, --dry-run display commands without modifying any files + # --features display basic configuration information and exit + # --mode=MODE use operation mode MODE +-# --no-finish let install mode avoid finish commands + # --preserve-dup-deps don't remove duplicate dependency libraries + # --quiet, --silent don't print informational messages + # --no-quiet, --no-silent +@@ -71,17 +69,19 @@ + # compiler: $LTCC + # compiler flags: $LTCFLAGS + # linker: $LD (gnu? $with_gnu_ld) +-# $progname: (GNU libtool 1.3134 2009-11-29) 2.2.7a ++# $progname: (GNU libtool) 2.4 + # automake: $automake_version + # autoconf: $autoconf_version + # + # Report bugs to <bug-libtool(a)gnu.org>. ++# GNU libtool home page: <http://www.gnu.org/software/libtool/>. ++# General help using GNU software: <http://www.gnu.org/gethelp/>. + + PROGRAM=libtool + PACKAGE=libtool +-VERSION=2.2.7a +-TIMESTAMP=" 1.3134 2009-11-29" +-package_revision=1.3134 ++VERSION=2.4 ++TIMESTAMP="" ++package_revision=1.3293 + + # Be Bourne compatible + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +@@ -106,9 +106,6 @@ _LTECHO_EOF' + } + + # NLS nuisances: We save the old values to restore during execute mode. +-# Only set LANG and LC_ALL to C if already set. +-# These must not be set unconditionally because not all systems understand +-# e.g. LANG=C (notably SCO). + lt_user_locale= + lt_safe_locale= + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +@@ -121,15 +118,13 @@ do + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" + done ++LC_ALL=C ++LANGUAGE=C ++export LANGUAGE LC_ALL + + $lt_unset CDPATH + + +- +- +- +- +- + # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh + # is ksh but when the shell is invoked as "sh" and the current value of + # the _XPG environment variable is not equal to 1 (one), the special +@@ -140,7 +135,7 @@ progpath="$0" + + + : ${CP="cp -f"} +-: ${ECHO=$as_echo} ++test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} + : ${EGREP="/bin/grep -E"} + : ${FGREP="/bin/grep -F"} + : ${GREP="/bin/grep"} +@@ -149,7 +144,7 @@ progpath="$0" + : ${MKDIR="mkdir"} + : ${MV="mv -f"} + : ${RM="rm -f"} +-: ${SED="/mount/endor/wildenhu/local-x86_64/bin/sed"} ++: ${SED="/bin/sed"} + : ${SHELL="${CONFIG_SHELL-/bin/sh}"} + : ${Xsed="$SED -e 1s/^X//"} + +@@ -169,6 +164,27 @@ IFS=" $lt_nl" + dirname="s,/[^/]*$,," + basename="s,^.*/,," + ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} # func_dirname may be replaced by extended shell implementation ++ ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "${1}" | $SED "$basename"` ++} # func_basename may be replaced by extended shell implementation ++ ++ + # func_dirname_and_basename file append nondir_replacement + # perform func_basename and func_dirname in a single function + # call: +@@ -183,17 +199,31 @@ basename="s,^.*/,," + # those functions but instead duplicate the functionality here. + func_dirname_and_basename () + { +- # Extract subdirectory from the argument. +- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` +- if test "X$func_dirname_result" = "X${1}"; then +- func_dirname_result="${3}" +- else +- func_dirname_result="$func_dirname_result${2}" +- fi +- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +-} ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` ++} # func_dirname_and_basename may be replaced by extended shell implementation ++ ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; ++ esac ++} # func_stripname may be replaced by extended shell implementation + +-# Generated shell functions inserted here. + + # These SED scripts presuppose an absolute path with a trailing slash. + pathcar='s,^/$[^/]*$.*$,\1,' +@@ -376,6 +406,15 @@ sed_quote_subst='s/$[`"$\\]$/\\\1/g' + # Same as above, but do not quote variable references. + double_quote_subst='s/$["`\\]$/\\\1/g' + ++# Sed substitution that turns a string into a regex matching for the ++# string literally. ++sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' ++ ++# Sed substitution that converts a w32 file name or path ++# which contains forward slashes, into one that contains ++# (escaped) backslashes. A very naive implementation. ++lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' ++ + # Re-`\' parameter expansions in output of double_quote_subst that were + # `\'-ed in input to the same. If an odd number of `\' preceded a '$' + # in input to double_quote_subst, that '$' was protected from expansion. +@@ -404,7 +443,7 @@ opt_warning=: + # name if it has been set yet. + func_echo () + { +- $ECHO "$progname${mode+: }$mode: $*" ++ $ECHO "$progname: ${opt_mode+$opt_mode: }$*" + } + + # func_verbose arg... +@@ -430,14 +469,14 @@ func_echo_all () + # Echo program name prefixed message to standard error. + func_error () + { +- $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 ++ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 + } + + # func_warning arg... + # Echo program name prefixed warning message to standard error. + func_warning () + { +- $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 ++ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +@@ -656,19 +695,35 @@ func_show_eval_locale () + fi + } + +- +- ++# func_tr_sh ++# Turn $1 into a string suitable for a shell variable name. ++# Result is stored in $func_tr_sh_result. All characters ++# not in the set a-zA-Z0-9_ are replaced with '_'. Further, ++# if $1 begins with a digit, a '_' is prepended as well. ++func_tr_sh () ++{ ++ case $1 in ++ [0-9]* | *[!a-zA-Z0-9_]*) ++ func_tr_sh_result=`$ECHO "$1" | $SED 's/^$[0-9]$/_\1/; s/[^a-zA-Z0-9_]/_/g'` ++ ;; ++ * ) ++ func_tr_sh_result=$1 ++ ;; ++ esac ++} + + + # func_version + # Echo version message to standard output and exit. + func_version () + { ++ $opt_debug ++ + $SED -n '/(C)/!b go + :more + /\./!{ + N +- s/\n# // ++ s/\n# / / + b more + } + :go +@@ -685,7 +740,9 @@ func_version () + # Echo short help message to standard output and exit. + func_usage () + { +- $SED -n '/^# Usage:/,/^# *-h/ { ++ $opt_debug ++ ++ $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ +@@ -701,7 +758,10 @@ func_usage () + # unless 'noexit' is passed as argument. + func_help () + { ++ $opt_debug ++ + $SED -n '/^# Usage:/,/# Report bugs to/ { ++ :print + s/^# // + s/^# *$// + s*\$progname*'$progname'* +@@ -714,7 +774,11 @@ func_help () + s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ + p +- }' < "$progpath" ++ d ++ } ++ /^# .* home page:/b print ++ /^# General help using/b print ++ ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret +@@ -726,12 +790,39 @@ func_help () + # exit_cmd. + func_missing_arg () + { +- func_error "missing argument for $1" ++ $opt_debug ++ ++ func_error "missing argument for $1." + exit_cmd=exit + } + +-exit_cmd=: + ++# func_split_short_opt shortopt ++# Set func_split_short_opt_name and func_split_short_opt_arg shell ++# variables after splitting SHORTOPT after the 2nd character. ++func_split_short_opt () ++{ ++ my_sed_short_opt='1s/^$..$.*$/\1/;q' ++ my_sed_short_rest='1s/^..$.*$$/\1/;q' ++ ++ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` ++ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` ++} # func_split_short_opt may be replaced by extended shell implementation ++ ++ ++# func_split_long_opt longopt ++# Set func_split_long_opt_name and func_split_long_opt_arg shell ++# variables after splitting LONGOPT at the `=' sign. ++func_split_long_opt () ++{ ++ my_sed_long_opt='1s/^$--[^=]*$=.*/\1/;q' ++ my_sed_long_arg='1s/^--[^=]*=//' ++ ++ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` ++ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` ++} # func_split_long_opt may be replaced by extended shell implementation ++ ++exit_cmd=: + + + +@@ -741,26 +832,64 @@ magic="%%%MAGIC variable%%%" + magic_exe="%%%MAGIC EXE variable%%%" + + # Global variables. +-# $mode is unset + nonopt= +-execute_dlfiles= + preserve_args= + lo2o="s/\\.lo\$/.${objext}/" + o2lo="s/\\.${objext}\$/.lo/" + extracted_archives= + extracted_serial=0 + +-opt_dry_run=false +-opt_finish=: +-opt_duplicate_deps=false +-opt_silent=false +-opt_debug=: +- + # If this variable is set in any of the actions, the command in it + # will be execed at the end. This prevents here-documents from being + # left over by shells. + exec_cmd= + ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "${1}=\$${1}\${2}" ++} # func_append may be replaced by extended shell implementation ++ ++# func_append_quoted var value ++# Quote VALUE and append to the end of shell variable VAR, separated ++# by a space. ++func_append_quoted () ++{ ++ func_quote_for_eval "${2}" ++ eval "${1}=\$${1}\\ \$func_quote_for_eval_result" ++} # func_append_quoted may be replaced by extended shell implementation ++ ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "${@}"` ++} # func_arith may be replaced by extended shell implementation ++ ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` ++} # func_len may be replaced by extended shell implementation ++ ++ ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` ++} # func_lo2o may be replaced by extended shell implementation ++ ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` ++} # func_xform may be replaced by extended shell implementation ++ ++ + # func_fatal_configuration arg... + # Echo program name prefixed message to standard error, followed by + # a configuration failure hint, and exit. +@@ -850,130 +979,204 @@ func_enable_tag () + esac + } + +-# Parse options once, thoroughly. This comes as soon as possible in +-# the script to make things like `libtool --version' happen quickly. ++# func_check_version_match ++# Ensure that we are using m4 macros, and libtool script from the same ++# release of libtool. ++func_check_version_match () + { ++ if test "$package_revision" != "$macro_revision"; then ++ if test "$VERSION" != "$macro_version"; then ++ if test -z "$macro_version"; then ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the ++$progname: definition of this LT_INIT comes from an older release. ++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION ++$progname: and run autoconf again. ++_LT_EOF ++ else ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the ++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. ++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION ++$progname: and run autoconf again. ++_LT_EOF ++ fi ++ else ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, ++$progname: but the definition of this LT_INIT comes from revision $macro_revision. ++$progname: You should recreate aclocal.m4 with macros from revision $package_revision ++$progname: of $PACKAGE $VERSION and run autoconf again. ++_LT_EOF ++ fi + +- # Shorthand for --mode=foo, only valid as the first argument +- case $1 in +- clean|clea|cle|cl) +- shift; set dummy --mode clean ${1+"$@"}; shift +- ;; +- compile|compil|compi|comp|com|co|c) +- shift; set dummy --mode compile ${1+"$@"}; shift +- ;; +- execute|execut|execu|exec|exe|ex|e) +- shift; set dummy --mode execute ${1+"$@"}; shift +- ;; +- finish|finis|fini|fin|fi|f) +- shift; set dummy --mode finish ${1+"$@"}; shift +- ;; +- install|instal|insta|inst|ins|in|i) +- shift; set dummy --mode install ${1+"$@"}; shift +- ;; +- link|lin|li|l) +- shift; set dummy --mode link ${1+"$@"}; shift +- ;; +- uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) +- shift; set dummy --mode uninstall ${1+"$@"}; shift +- ;; +- esac ++ exit $EXIT_MISMATCH ++ fi ++} ++ ++ ++# Shorthand for --mode=foo, only valid as the first argument ++case $1 in ++clean|clea|cle|cl) ++ shift; set dummy --mode clean ${1+"$@"}; shift ++ ;; ++compile|compil|compi|comp|com|co|c) ++ shift; set dummy --mode compile ${1+"$@"}; shift ++ ;; ++execute|execut|execu|exec|exe|ex|e) ++ shift; set dummy --mode execute ${1+"$@"}; shift ++ ;; ++finish|finis|fini|fin|fi|f) ++ shift; set dummy --mode finish ${1+"$@"}; shift ++ ;; ++install|instal|insta|inst|ins|in|i) ++ shift; set dummy --mode install ${1+"$@"}; shift ++ ;; ++link|lin|li|l) ++ shift; set dummy --mode link ${1+"$@"}; shift ++ ;; ++uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) ++ shift; set dummy --mode uninstall ${1+"$@"}; shift ++ ;; ++esac + +- # Parse non-mode specific arguments: +- while test "$#" -gt 0; do ++ ++ ++# Option defaults: ++opt_debug=: ++opt_dry_run=false ++opt_config=false ++opt_preserve_dup_deps=false ++opt_features=false ++opt_finish=false ++opt_help=false ++opt_help_all=false ++opt_silent=: ++opt_verbose=: ++opt_silent=false ++opt_verbose=false ++ ++ ++# Parse options once, thoroughly. This comes as soon as possible in the ++# script to make things like `--version' happen as quickly as we can. ++{ ++ # this just eases exit handling ++ while test $# -gt 0; do + opt="$1" + shift +- + case $opt in +- --config) func_config ;; +- +- --debug) preserve_args="$preserve_args $opt" ++ --debug|-x) opt_debug='set -x' + func_echo "enabling shell trace mode" +- opt_debug='set -x' + $opt_debug + ;; +- +- -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break +- execute_dlfiles="$execute_dlfiles $1" +- shift ++ --dry-run|--dryrun|-n) ++ opt_dry_run=: + ;; +- +- --dry-run | -n) opt_dry_run=: ;; +- --features) func_features ;; +- --finish) mode="finish" ;; +- --no-finish) opt_finish=false ;; +- +- --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break +- case $1 in +- # Valid mode arguments: +- clean) ;; +- compile) ;; +- execute) ;; +- finish) ;; +- install) ;; +- link) ;; +- relink) ;; +- uninstall) ;; +- +- # Catch anything else as an error +- *) func_error "invalid argument for $opt" +- exit_cmd=exit +- break +- ;; +- esac +- +- mode="$1" ++ --config) ++ opt_config=: ++func_config ++ ;; ++ --dlopen|-dlopen) ++ optarg="$1" ++ opt_dlopen="${opt_dlopen+$opt_dlopen ++}$optarg" + shift + ;; +- + --preserve-dup-deps) +- opt_duplicate_deps=: ;; +- +- --quiet|--silent) preserve_args="$preserve_args $opt" +- opt_silent=: +- opt_verbose=false ++ opt_preserve_dup_deps=: + ;; +- +- --no-quiet|--no-silent) +- preserve_args="$preserve_args $opt" +- opt_silent=false ++ --features) ++ opt_features=: ++func_features + ;; +- +- --verbose| -v) preserve_args="$preserve_args $opt" ++ --finish) ++ opt_finish=: ++set dummy --mode finish ${1+"$@"}; shift ++ ;; ++ --help) ++ opt_help=: ++ ;; ++ --help-all) ++ opt_help_all=: ++opt_help=': help-all' ++ ;; ++ --mode) ++ test $# = 0 && func_missing_arg $opt && break ++ optarg="$1" ++ opt_mode="$optarg" ++case $optarg in ++ # Valid mode arguments: ++ clean|compile|execute|finish|install|link|relink|uninstall) ;; ++ ++ # Catch anything else as an error ++ *) func_error "invalid argument for $opt" ++ exit_cmd=exit ++ break ++ ;; ++esac ++ shift ++ ;; ++ --no-silent|--no-quiet) + opt_silent=false +- opt_verbose=: ++func_append preserve_args " $opt" + ;; +- +- --no-verbose) preserve_args="$preserve_args $opt" ++ --no-verbose) + opt_verbose=false ++func_append preserve_args " $opt" + ;; +- +- --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break +- preserve_args="$preserve_args $opt $1" +- func_enable_tag "$1" # tagname is set here ++ --silent|--quiet) ++ opt_silent=: ++func_append preserve_args " $opt" ++ opt_verbose=false ++ ;; ++ --verbose|-v) ++ opt_verbose=: ++func_append preserve_args " $opt" ++opt_silent=false ++ ;; ++ --tag) ++ test $# = 0 && func_missing_arg $opt && break ++ optarg="$1" ++ opt_tag="$optarg" ++func_append preserve_args " $opt $optarg" ++func_enable_tag "$optarg" + shift + ;; + ++ -\?|-h) func_usage ;; ++ --help) func_help ;; ++ --version) func_version ;; ++ + # Separate optargs to long options: +- -dlopen=*|--mode=*|--tag=*) +- func_opt_split "$opt" +- set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} ++ --*=*) ++ func_split_long_opt "$opt" ++ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + shift + ;; + +- -\?|-h) func_usage ;; +- --help) opt_help=: ;; +- --help-all) opt_help=': help-all' ;; +- --version) func_version ;; +- +- -*) func_fatal_help "unrecognized option \`$opt'" ;; +- +- *) nonopt="$opt" +- break ++ # Separate non-argument short options: ++ -\?*|-h*|-n*|-v*) ++ func_split_short_opt "$opt" ++ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} ++ shift + ;; ++ ++ --) break ;; ++ -*) func_fatal_help "unrecognized option \`$opt'" ;; ++ *) set dummy "$opt" ${1+"$@"}; shift; break ;; + esac + done + ++ # Validate options: ++ ++ # save first non-option argument ++ if test "$#" -gt 0; then ++ nonopt="$opt" ++ shift ++ fi ++ ++ # preserve --debug ++ test "$opt_debug" = : || func_append preserve_args " --debug" + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* ) +@@ -981,82 +1184,44 @@ func_enable_tag () + opt_duplicate_compiler_generated_deps=: + ;; + *) +- opt_duplicate_compiler_generated_deps=$opt_duplicate_deps ++ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + +- # Having warned about all mis-specified options, bail out if +- # anything was wrong. +- $exit_cmd $EXIT_FAILURE +-} ++ $opt_help || { ++ # Sanity checks first: ++ func_check_version_match + +-# func_check_version_match +-# Ensure that we are using m4 macros, and libtool script from the same +-# release of libtool. +-func_check_version_match () +-{ +- if test "$package_revision" != "$macro_revision"; then +- if test "$VERSION" != "$macro_version"; then +- if test -z "$macro_version"; then +- cat >&2 <<_LT_EOF +-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +-$progname: definition of this LT_INIT comes from an older release. +-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +-$progname: and run autoconf again. +-_LT_EOF +- else +- cat >&2 <<_LT_EOF +-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +-$progname: and run autoconf again. +-_LT_EOF +- fi +- else +- cat >&2 <<_LT_EOF +-$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +-$progname: but the definition of this LT_INIT comes from revision $macro_revision. +-$progname: You should recreate aclocal.m4 with macros from revision $package_revision +-$progname: of $PACKAGE $VERSION and run autoconf again. +-_LT_EOF ++ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then ++ func_fatal_configuration "not configured to build any kind of library" + fi + +- exit $EXIT_MISMATCH +- fi +-} +- ++ # Darwin sucks ++ eval std_shrext=\"$shrext_cmds\" + +-## ----------- ## +-## Main. ## +-## ----------- ## +- +-$opt_help || { +- # Sanity checks first: +- func_check_version_match +- +- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then +- func_fatal_configuration "not configured to build any kind of library" +- fi ++ # Only execute mode is allowed to have -dlopen flags. ++ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then ++ func_error "unrecognized option \`-dlopen'" ++ $ECHO "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi + +- test -z "$mode" && func_fatal_error "error: you must specify a MODE." ++ # Change the help message to a mode-specific one. ++ generic_help="$help" ++ help="Try \`$progname --help --mode=$opt_mode' for more information." ++ } + + +- # Darwin sucks +- eval "std_shrext=\"$shrext_cmds\"" ++ # Bail if the options were screwed ++ $exit_cmd $EXIT_FAILURE ++} + + +- # Only execute mode is allowed to have -dlopen flags. +- if test -n "$execute_dlfiles" && test "$mode" != execute; then +- func_error "unrecognized option \`-dlopen'" +- $ECHO "$help" 1>&2 +- exit $EXIT_FAILURE +- fi + +- # Change the help message to a mode-specific one. +- generic_help="$help" +- help="Try \`$progname --help --mode=$mode' for more information." +-} + ++## ----------- ## ++## Main. ## ++## ----------- ## + + # func_lalib_p file + # True iff FILE is a libtool `.la' library or `.lo' object file. +@@ -1121,12 +1286,9 @@ func_ltwrapper_executable_p () + # temporary ltwrapper_script. + func_ltwrapper_scriptname () + { +- func_ltwrapper_scriptname_result="" +- if func_ltwrapper_executable_p "$1"; then +- func_dirname_and_basename "$1" "" "." +- func_stripname '' '.exe' "$func_basename_result" +- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" +- fi ++ func_dirname_and_basename "$1" "" "." ++ func_stripname '' '.exe' "$func_basename_result" ++ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + } + + # func_ltwrapper_p file +@@ -1149,7 +1311,7 @@ func_execute_cmds () + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs +- eval "cmd=\"$cmd\"" ++ eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +@@ -1172,6 +1334,37 @@ func_source () + } + + ++# func_resolve_sysroot PATH ++# Replace a leading = in PATH with a sysroot. Store the result into ++# func_resolve_sysroot_result ++func_resolve_sysroot () ++{ ++ func_resolve_sysroot_result=$1 ++ case $func_resolve_sysroot_result in ++ =*) ++ func_stripname '=' '' "$func_resolve_sysroot_result" ++ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ++ ;; ++ esac ++} ++ ++# func_replace_sysroot PATH ++# If PATH begins with the sysroot, replace it with = and ++# store the result into func_replace_sysroot_result. ++func_replace_sysroot () ++{ ++ case "$lt_sysroot:$1" in ++ ?*:"$lt_sysroot"*) ++ func_stripname "$lt_sysroot" '' "$1" ++ func_replace_sysroot_result="=$func_stripname_result" ++ ;; ++ *) ++ # Including no sysroot. ++ func_replace_sysroot_result=$1 ++ ;; ++ esac ++} ++ + # func_infer_tag arg + # Infer tagged configuration to use if any are available and + # if one wasn't chosen via the "--tag" command line option. +@@ -1184,8 +1377,7 @@ func_infer_tag () + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do +- func_quote_for_eval "$arg" +- CC_quoted="$CC_quoted $func_quote_for_eval_result" ++ func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` +@@ -1204,8 +1396,7 @@ func_infer_tag () + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. +- func_quote_for_eval "$arg" +- CC_quoted="$CC_quoted $func_quote_for_eval_result" ++ func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` +@@ -1274,6 +1465,486 @@ EOF + } + } + ++ ++################################################## ++# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS # ++################################################## ++ ++# func_convert_core_file_wine_to_w32 ARG ++# Helper function used by file name conversion functions when $build is *nix, ++# and $host is mingw, cygwin, or some other w32 environment. Relies on a ++# correctly configured wine environment available, with the winepath program ++# in $build's $PATH. ++# ++# ARG is the $build file name to be converted to w32 format. ++# Result is available in $func_convert_core_file_wine_to_w32_result, and will ++# be empty on error (or when ARG is empty) ++func_convert_core_file_wine_to_w32 () ++{ ++ $opt_debug ++ func_convert_core_file_wine_to_w32_result="$1" ++ if test -n "$1"; then ++ # Unfortunately, winepath does not exit with a non-zero error code, so we ++ # are forced to check the contents of stdout. On the other hand, if the ++ # command is not found, the shell will set an exit code of 127 and print ++ # *an error message* to stdout. So we must check for both error code of ++ # zero AND non-empty stdout, which explains the odd construction: ++ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null` ++ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then ++ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | ++ $SED -e "$lt_sed_naive_backslashify"` ++ else ++ func_convert_core_file_wine_to_w32_result= ++ fi ++ fi ++} ++# end: func_convert_core_file_wine_to_w32 ++ ++ ++# func_convert_core_path_wine_to_w32 ARG ++# Helper function used by path conversion functions when $build is *nix, and ++# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly ++# configured wine environment available, with the winepath program in $build's ++# $PATH. Assumes ARG has no leading or trailing path separator characters. ++# ++# ARG is path to be converted from $build format to win32. ++# Result is available in $func_convert_core_path_wine_to_w32_result. ++# Unconvertible file (directory) names in ARG are skipped; if no directory names ++# are convertible, then the result may be empty. ++func_convert_core_path_wine_to_w32 () ++{ ++ $opt_debug ++ # unfortunately, winepath doesn't convert paths, only file names ++ func_convert_core_path_wine_to_w32_result="" ++ if test -n "$1"; then ++ oldIFS=$IFS ++ IFS=: ++ for func_convert_core_path_wine_to_w32_f in $1; do ++ IFS=$oldIFS ++ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" ++ if test -n "$func_convert_core_file_wine_to_w32_result" ; then ++ if test -z "$func_convert_core_path_wine_to_w32_result"; then ++ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" ++ else ++ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" ++ fi ++ fi ++ done ++ IFS=$oldIFS ++ fi ++} ++# end: func_convert_core_path_wine_to_w32 ++ ++ ++# func_cygpath ARGS... ++# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when ++# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) ++# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or ++# (2), returns the Cygwin file name or path in func_cygpath_result (input ++# file name or path is assumed to be in w32 format, as previously converted ++# from $build's *nix or MSYS format). In case (3), returns the w32 file name ++# or path in func_cygpath_result (input file name or path is assumed to be in ++# Cygwin format). Returns an empty string on error. ++# ++# ARGS are passed to cygpath, with the last one being the file name or path to ++# be converted. ++# ++# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH ++# environment variable; do not put it in $PATH. ++func_cygpath () ++{ ++ $opt_debug ++ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then ++ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` ++ if test "$?" -ne 0; then ++ # on failure, ensure result is empty ++ func_cygpath_result= ++ fi ++ else ++ func_cygpath_result= ++ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" ++ fi ++} ++#end: func_cygpath ++ ++ ++# func_convert_core_msys_to_w32 ARG ++# Convert file name or path ARG from MSYS format to w32 format. Return ++# result in func_convert_core_msys_to_w32_result. ++func_convert_core_msys_to_w32 () ++{ ++ $opt_debug ++ # awkward: cmd appends spaces to result ++ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | ++ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` ++} ++#end: func_convert_core_msys_to_w32 ++ ++ ++# func_convert_file_check ARG1 ARG2 ++# Verify that ARG1 (a file name in $build format) was converted to $host ++# format in ARG2. Otherwise, emit an error message, but continue (resetting ++# func_to_host_file_result to ARG1). ++func_convert_file_check () ++{ ++ $opt_debug ++ if test -z "$2" && test -n "$1" ; then ++ func_error "Could not determine host file name corresponding to" ++ func_error " \`$1'" ++ func_error "Continuing, but uninstalled executables may not work." ++ # Fallback: ++ func_to_host_file_result="$1" ++ fi ++} ++# end func_convert_file_check ++ ++ ++# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH ++# Verify that FROM_PATH (a path in $build format) was converted to $host ++# format in TO_PATH. Otherwise, emit an error message, but continue, resetting ++# func_to_host_file_result to a simplistic fallback value (see below). ++func_convert_path_check () ++{ ++ $opt_debug ++ if test -z "$4" && test -n "$3"; then ++ func_error "Could not determine the host path corresponding to" ++ func_error " \`$3'" ++ func_error "Continuing, but uninstalled executables may not work." ++ # Fallback. This is a deliberately simplistic "conversion" and ++ # should not be "improved". See libtool.info. ++ if test "x$1" != "x$2"; then ++ lt_replace_pathsep_chars="s|$1|$2|g" ++ func_to_host_path_result=`echo "$3" | ++ $SED -e "$lt_replace_pathsep_chars"` ++ else ++ func_to_host_path_result="$3" ++ fi ++ fi ++} ++# end func_convert_path_check ++ ++ ++# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG ++# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT ++# and appending REPL if ORIG matches BACKPAT. ++func_convert_path_front_back_pathsep () ++{ ++ $opt_debug ++ case $4 in ++ $1 ) func_to_host_path_result="$3$func_to_host_path_result" ++ ;; ++ esac ++ case $4 in ++ $2 ) func_append func_to_host_path_result "$3" ++ ;; ++ esac ++} ++# end func_convert_path_front_back_pathsep ++ ++ ++################################################## ++# $build to $host FILE NAME CONVERSION FUNCTIONS # ++################################################## ++# invoked via `$to_host_file_cmd ARG' ++# ++# In each case, ARG is the path to be converted from $build to $host format. ++# Result will be available in $func_to_host_file_result. ++ ++ ++# func_to_host_file ARG ++# Converts the file name ARG from $build format to $host format. Return result ++# in func_to_host_file_result. ++func_to_host_file () ++{ ++ $opt_debug ++ $to_host_file_cmd "$1" ++} ++# end func_to_host_file ++ ++ ++# func_to_tool_file ARG LAZY ++# converts the file name ARG from $build format to toolchain format. Return ++# result in func_to_tool_file_result. If the conversion in use is listed ++# in (the comma separated) LAZY, no conversion takes place. ++func_to_tool_file () ++{ ++ $opt_debug ++ case ,$2, in ++ *,"$to_tool_file_cmd",*) ++ func_to_tool_file_result=$1 ++ ;; ++ *) ++ $to_tool_file_cmd "$1" ++ func_to_tool_file_result=$func_to_host_file_result ++ ;; ++ esac ++} ++# end func_to_tool_file ++ ++ ++# func_convert_file_noop ARG ++# Copy ARG to func_to_host_file_result. ++func_convert_file_noop () ++{ ++ func_to_host_file_result="$1" ++} ++# end func_convert_file_noop ++ ++ ++# func_convert_file_msys_to_w32 ARG ++# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic ++# conversion to w32 is not available inside the cwrapper. Returns result in ++# func_to_host_file_result. ++func_convert_file_msys_to_w32 () ++{ ++ $opt_debug ++ func_to_host_file_result="$1" ++ if test -n "$1"; then ++ func_convert_core_msys_to_w32 "$1" ++ func_to_host_file_result="$func_convert_core_msys_to_w32_result" ++ fi ++ func_convert_file_check "$1" "$func_to_host_file_result" ++} ++# end func_convert_file_msys_to_w32 ++ ++ ++# func_convert_file_cygwin_to_w32 ARG ++# Convert file name ARG from Cygwin to w32 format. Returns result in ++# func_to_host_file_result. ++func_convert_file_cygwin_to_w32 () ++{ ++ $opt_debug ++ func_to_host_file_result="$1" ++ if test -n "$1"; then ++ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use ++ # LT_CYGPATH in this case. ++ func_to_host_file_result=`cygpath -m "$1"` ++ fi ++ func_convert_file_check "$1" "$func_to_host_file_result" ++} ++# end func_convert_file_cygwin_to_w32 ++ ++ ++# func_convert_file_nix_to_w32 ARG ++# Convert file name ARG from *nix to w32 format. Requires a wine environment ++# and a working winepath. Returns result in func_to_host_file_result. ++func_convert_file_nix_to_w32 () ++{ ++ $opt_debug ++ func_to_host_file_result="$1" ++ if test -n "$1"; then ++ func_convert_core_file_wine_to_w32 "$1" ++ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" ++ fi ++ func_convert_file_check "$1" "$func_to_host_file_result" ++} ++# end func_convert_file_nix_to_w32 ++ ++ ++# func_convert_file_msys_to_cygwin ARG ++# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. ++# Returns result in func_to_host_file_result. ++func_convert_file_msys_to_cygwin () ++{ ++ $opt_debug ++ func_to_host_file_result="$1" ++ if test -n "$1"; then ++ func_convert_core_msys_to_w32 "$1" ++ func_cygpath -u "$func_convert_core_msys_to_w32_result" ++ func_to_host_file_result="$func_cygpath_result" ++ fi ++ func_convert_file_check "$1" "$func_to_host_file_result" ++} ++# end func_convert_file_msys_to_cygwin ++ ++ ++# func_convert_file_nix_to_cygwin ARG ++# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed ++# in a wine environment, working winepath, and LT_CYGPATH set. Returns result ++# in func_to_host_file_result. ++func_convert_file_nix_to_cygwin () ++{ ++ $opt_debug ++ func_to_host_file_result="$1" ++ if test -n "$1"; then ++ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. ++ func_convert_core_file_wine_to_w32 "$1" ++ func_cygpath -u "$func_convert_core_file_wine_to_w32_result" ++ func_to_host_file_result="$func_cygpath_result" ++ fi ++ func_convert_file_check "$1" "$func_to_host_file_result" ++} ++# end func_convert_file_nix_to_cygwin ++ ++ ++############################################# ++# $build to $host PATH CONVERSION FUNCTIONS # ++############################################# ++# invoked via `$to_host_path_cmd ARG' ++# ++# In each case, ARG is the path to be converted from $build to $host format. ++# The result will be available in $func_to_host_path_result. ++# ++# Path separators are also converted from $build format to $host format. If ++# ARG begins or ends with a path separator character, it is preserved (but ++# converted to $host format) on output. ++# ++# All path conversion functions are named using the following convention: ++# file name conversion function : func_convert_file_X_to_Y () ++# path conversion function : func_convert_path_X_to_Y () ++# where, for any given $build/$host combination the 'X_to_Y' value is the ++# same. If conversion functions are added for new $build/$host combinations, ++# the two new functions must follow this pattern, or func_init_to_host_path_cmd ++# will break. ++ ++ ++# func_init_to_host_path_cmd ++# Ensures that function "pointer" variable $to_host_path_cmd is set to the ++# appropriate value, based on the value of $to_host_file_cmd. ++to_host_path_cmd= ++func_init_to_host_path_cmd () ++{ ++ $opt_debug ++ if test -z "$to_host_path_cmd"; then ++ func_stripname 'func_convert_file_' '' "$to_host_file_cmd" ++ to_host_path_cmd="func_convert_path_${func_stripname_result}" ++ fi ++} ++ ++ ++# func_to_host_path ARG ++# Converts the path ARG from $build format to $host format. Return result ++# in func_to_host_path_result. ++func_to_host_path () ++{ ++ $opt_debug ++ func_init_to_host_path_cmd ++ $to_host_path_cmd "$1" ++} ++# end func_to_host_path ++ ++ ++# func_convert_path_noop ARG ++# Copy ARG to func_to_host_path_result. ++func_convert_path_noop () ++{ ++ func_to_host_path_result="$1" ++} ++# end func_convert_path_noop ++ ++ ++# func_convert_path_msys_to_w32 ARG ++# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic ++# conversion to w32 is not available inside the cwrapper. Returns result in ++# func_to_host_path_result. ++func_convert_path_msys_to_w32 () ++{ ++ $opt_debug ++ func_to_host_path_result="$1" ++ if test -n "$1"; then ++ # Remove leading and trailing path separator characters from ARG. MSYS ++ # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; ++ # and winepath ignores them completely. ++ func_stripname : : "$1" ++ func_to_host_path_tmp1=$func_stripname_result ++ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" ++ func_to_host_path_result="$func_convert_core_msys_to_w32_result" ++ func_convert_path_check : ";" \ ++ "$func_to_host_path_tmp1" "$func_to_host_path_result" ++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" ++ fi ++} ++# end func_convert_path_msys_to_w32 ++ ++ ++# func_convert_path_cygwin_to_w32 ARG ++# Convert path ARG from Cygwin to w32 format. Returns result in ++# func_to_host_file_result. ++func_convert_path_cygwin_to_w32 () ++{ ++ $opt_debug ++ func_to_host_path_result="$1" ++ if test -n "$1"; then ++ # See func_convert_path_msys_to_w32: ++ func_stripname : : "$1" ++ func_to_host_path_tmp1=$func_stripname_result ++ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` ++ func_convert_path_check : ";" \ ++ "$func_to_host_path_tmp1" "$func_to_host_path_result" ++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" ++ fi ++} ++# end func_convert_path_cygwin_to_w32 ++ ++ ++# func_convert_path_nix_to_w32 ARG ++# Convert path ARG from *nix to w32 format. Requires a wine environment and ++# a working winepath. Returns result in func_to_host_file_result. ++func_convert_path_nix_to_w32 () ++{ ++ $opt_debug ++ func_to_host_path_result="$1" ++ if test -n "$1"; then ++ # See func_convert_path_msys_to_w32: ++ func_stripname : : "$1" ++ func_to_host_path_tmp1=$func_stripname_result ++ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" ++ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" ++ func_convert_path_check : ";" \ ++ "$func_to_host_path_tmp1" "$func_to_host_path_result" ++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" ++ fi ++} ++# end func_convert_path_nix_to_w32 ++ ++ ++# func_convert_path_msys_to_cygwin ARG ++# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. ++# Returns result in func_to_host_file_result. ++func_convert_path_msys_to_cygwin () ++{ ++ $opt_debug ++ func_to_host_path_result="$1" ++ if test -n "$1"; then ++ # See func_convert_path_msys_to_w32: ++ func_stripname : : "$1" ++ func_to_host_path_tmp1=$func_stripname_result ++ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" ++ func_cygpath -u -p "$func_convert_core_msys_to_w32_result" ++ func_to_host_path_result="$func_cygpath_result" ++ func_convert_path_check : : \ ++ "$func_to_host_path_tmp1" "$func_to_host_path_result" ++ func_convert_path_front_back_pathsep ":*" "*:" : "$1" ++ fi ++} ++# end func_convert_path_msys_to_cygwin ++ ++ ++# func_convert_path_nix_to_cygwin ARG ++# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a ++# a wine environment, working winepath, and LT_CYGPATH set. Returns result in ++# func_to_host_file_result. ++func_convert_path_nix_to_cygwin () ++{ ++ $opt_debug ++ func_to_host_path_result="$1" ++ if test -n "$1"; then ++ # Remove leading and trailing path separator characters from ++ # ARG. msys behavior is inconsistent here, cygpath turns them ++ # into '.;' and ';.', and winepath ignores them completely. ++ func_stripname : : "$1" ++ func_to_host_path_tmp1=$func_stripname_result ++ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" ++ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" ++ func_to_host_path_result="$func_cygpath_result" ++ func_convert_path_check : : \ ++ "$func_to_host_path_tmp1" "$func_to_host_path_result" ++ func_convert_path_front_back_pathsep ":*" "*:" : "$1" ++ fi ++} ++# end func_convert_path_nix_to_cygwin ++ ++ + # func_mode_compile arg... + func_mode_compile () + { +@@ -1314,12 +1985,12 @@ func_mode_compile () + ;; + + -pie | -fpie | -fPIE) +- pie_flag="$pie_flag $arg" ++ func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) +- later="$later $arg" ++ func_append later " $arg" + continue + ;; + +@@ -1340,15 +2011,14 @@ func_mode_compile () + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" +- func_quote_for_eval "$arg" +- lastarg="$lastarg $func_quote_for_eval_result" ++ func_append_quoted lastarg "$arg" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. +- base_compile="$base_compile $lastarg" ++ func_append base_compile " $lastarg" + continue + ;; + +@@ -1364,8 +2034,7 @@ func_mode_compile () + esac # case $arg_mode + + # Aesthetically quote the previous argument. +- func_quote_for_eval "$lastarg" +- base_compile="$base_compile $func_quote_for_eval_result" ++ func_append_quoted base_compile "$lastarg" + done # for arg + + case $arg_mode in +@@ -1496,17 +2165,16 @@ compiler." + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi +- removelist="$removelist $output_obj" ++ func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist +- removelist="$removelist $lockfile" ++ func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + +- if test -n "$fix_srcfile_path"; then +- eval "srcfile=\"$fix_srcfile_path\"" +- fi ++ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 ++ srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + +@@ -1526,7 +2194,7 @@ compiler." + + if test -z "$output_obj"; then + # Place PIC objects in $objdir +- command="$command -o $lobj" ++ func_append command " -o $lobj" + fi + + func_show_eval_locale "$command" \ +@@ -1573,11 +2241,11 @@ compiler." + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then +- command="$command -o $obj" ++ func_append command " -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. +- command="$command$suppress_output" ++ func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + +@@ -1622,13 +2290,13 @@ compiler." + } + + $opt_help || { +- test "$mode" = compile && func_mode_compile ${1+"$@"} ++ test "$opt_mode" = compile && func_mode_compile ${1+"$@"} + } + + func_mode_help () + { + # We need to display help for each of the modes. +- case $mode in ++ case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. +@@ -1659,8 +2327,8 @@ This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes +- -prefer-pic try to building PIC objects only +- -prefer-non-pic try to building non-PIC objects only ++ -prefer-pic try to build PIC objects only ++ -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler +@@ -1804,7 +2472,7 @@ Otherwise, only FILE itself is deleted using RM." + ;; + + *) +- func_fatal_help "invalid operation mode \`$mode'" ++ func_fatal_help "invalid operation mode \`$opt_mode'" + ;; + esac + +@@ -1819,13 +2487,13 @@ if $opt_help; then + else + { + func_help noexit +- for mode in compile link execute install finish uninstall clean; do ++ for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit +- for mode in compile link execute install finish uninstall clean; do ++ for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done +@@ -1854,13 +2522,16 @@ func_mode_execute () + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. +- for file in $execute_dlfiles; do ++ for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) ++ func_resolve_sysroot "$file" ++ file=$func_resolve_sysroot_result ++ + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" +@@ -1882,7 +2553,7 @@ func_mode_execute () + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then +- dir="$dir/$objdir" ++ func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" +@@ -1907,10 +2578,10 @@ func_mode_execute () + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. +- if eval test -z \"\$$shlibpath_var\"; then +- eval $shlibpath_var=\$dir ++ if eval "test -z \"\$$shlibpath_var\""; then ++ eval "$shlibpath_var=\"\$dir\"" + else +- eval $shlibpath_var=\$dir:\$$shlibpath_var ++ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + +@@ -1939,8 +2610,7 @@ func_mode_execute () + ;; + esac + # Quote arguments (to preserve shell metacharacters). +- func_quote_for_eval "$file" +- args="$args $func_quote_for_eval_result" ++ func_append_quoted args "$file" + done + + if test "X$opt_dry_run" = Xfalse; then +@@ -1972,22 +2642,59 @@ func_mode_execute () + fi + } + +-test "$mode" = execute && func_mode_execute ${1+"$@"} ++test "$opt_mode" = execute && func_mode_execute ${1+"$@"} + + + # func_mode_finish arg... + func_mode_finish () + { + $opt_debug +- libdirs="$nonopt" ++ libs= ++ libdirs= + admincmds= + +- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then +- for dir +- do +- libdirs="$libdirs $dir" +- done ++ for opt in "$nonopt" ${1+"$@"} ++ do ++ if test -d "$opt"; then ++ func_append libdirs " $opt" + ++ elif test -f "$opt"; then ++ if func_lalib_unsafe_p "$opt"; then ++ func_append libs " $opt" ++ else ++ func_warning "\`$opt' is not a valid libtool archive" ++ fi ++ ++ else ++ func_fatal_error "invalid argument \`$opt'" ++ fi ++ done ++ ++ if test -n "$libs"; then ++ if test -n "$lt_sysroot"; then ++ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` ++ sysroot_cmd="s/$[ ']$$sysroot_regex/\1/g;" ++ else ++ sysroot_cmd= ++ fi ++ ++ # Remove sysroot references ++ if $opt_dry_run; then ++ for lib in $libs; do ++ echo "removing references to $lt_sysroot and \`=' prefixes from $lib" ++ done ++ else ++ tmpdir=`func_mktempdir` ++ for lib in $libs; do ++ sed -e "${sysroot_cmd} s/$[ ']-[LR]$=/\1/g; s/$[ ']$=/\1/g" $lib \ ++ > $tmpdir/tmp-la ++ mv -f $tmpdir/tmp-la $lib ++ done ++ ${RM}r "$tmpdir" ++ fi ++ fi ++ ++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. +@@ -1997,7 +2704,7 @@ func_mode_finish () + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" +- $opt_dry_run || eval "$cmds" || admincmds="$admincmds ++ $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done +@@ -2006,53 +2713,55 @@ func_mode_finish () + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + +- echo "----------------------------------------------------------------------" +- echo "Libraries have been installed in:" +- for libdir in $libdirs; do +- $ECHO " $libdir" +- done +- echo +- echo "If you ever happen to want to link against installed libraries" +- echo "in a given directory, LIBDIR, you must either use libtool, and" +- echo "specify the full pathname of the library, or use the \`-LLIBDIR'" +- echo "flag during linking and do at least one of the following:" +- if test -n "$shlibpath_var"; then +- echo " - add LIBDIR to the \`$shlibpath_var' environment variable" +- echo " during execution" +- fi +- if test -n "$runpath_var"; then +- echo " - add LIBDIR to the \`$runpath_var' environment variable" +- echo " during linking" +- fi +- if test -n "$hardcode_libdir_flag_spec"; then +- libdir=LIBDIR +- eval "flag=\"$hardcode_libdir_flag_spec\"" ++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then ++ echo "----------------------------------------------------------------------" ++ echo "Libraries have been installed in:" ++ for libdir in $libdirs; do ++ $ECHO " $libdir" ++ done ++ echo ++ echo "If you ever happen to want to link against installed libraries" ++ echo "in a given directory, LIBDIR, you must either use libtool, and" ++ echo "specify the full pathname of the library, or use the \`-LLIBDIR'" ++ echo "flag during linking and do at least one of the following:" ++ if test -n "$shlibpath_var"; then ++ echo " - add LIBDIR to the \`$shlibpath_var' environment variable" ++ echo " during execution" ++ fi ++ if test -n "$runpath_var"; then ++ echo " - add LIBDIR to the \`$runpath_var' environment variable" ++ echo " during linking" ++ fi ++ if test -n "$hardcode_libdir_flag_spec"; then ++ libdir=LIBDIR ++ eval flag=\"$hardcode_libdir_flag_spec\" + +- $ECHO " - use the \`$flag' linker flag" +- fi +- if test -n "$admincmds"; then +- $ECHO " - have your system administrator run these commands:$admincmds" +- fi +- if test -f /etc/ld.so.conf; then +- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" +- fi +- echo ++ $ECHO " - use the \`$flag' linker flag" ++ fi ++ if test -n "$admincmds"; then ++ $ECHO " - have your system administrator run these commands:$admincmds" ++ fi ++ if test -f /etc/ld.so.conf; then ++ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" ++ fi ++ echo + +- echo "See any operating system documentation about shared libraries for" +- case $host in +- solaris2.[6789]|solaris2.1[0-9]) +- echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" +- echo "pages." +- ;; +- *) +- echo "more information, such as the ld(1) and ld.so(8) manual pages." +- ;; +- esac +- echo "----------------------------------------------------------------------" ++ echo "See any operating system documentation about shared libraries for" ++ case $host in ++ solaris2.[6789]|solaris2.1[0-9]) ++ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" ++ echo "pages." ++ ;; ++ *) ++ echo "more information, such as the ld(1) and ld.so(8) manual pages." ++ ;; ++ esac ++ echo "----------------------------------------------------------------------" ++ fi + exit $EXIT_SUCCESS + } + +-test "$mode" = finish && func_mode_finish ${1+"$@"} ++test "$opt_mode" = finish && func_mode_finish ${1+"$@"} + + + # func_mode_install arg... +@@ -2077,7 +2786,7 @@ func_mode_install () + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" +- install_prog="$install_prog$func_quote_for_eval_result" ++ func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; +@@ -2097,7 +2806,7 @@ func_mode_install () + do + arg2= + if test -n "$dest"; then +- files="$files $dest" ++ func_append files " $dest" + dest=$arg + continue + fi +@@ -2135,11 +2844,11 @@ func_mode_install () + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" +- install_prog="$install_prog $func_quote_for_eval_result" ++ func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi +- install_shared_prog="$install_shared_prog $func_quote_for_eval_result" ++ func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ +@@ -2151,7 +2860,7 @@ func_mode_install () + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" +- install_shared_prog="$install_shared_prog -m $func_quote_for_eval_result" ++ func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + +@@ -2209,10 +2918,13 @@ func_mode_install () + case $file in + *.$libext) + # Do the static libraries later. +- staticlibs="$staticlibs $file" ++ func_append staticlibs " $file" + ;; + + *.la) ++ func_resolve_sysroot "$file" ++ file=$func_resolve_sysroot_result ++ + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" +@@ -2226,23 +2938,30 @@ func_mode_install () + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; +- *) current_libdirs="$current_libdirs $libdir" ;; ++ *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; +- *) future_libdirs="$future_libdirs $libdir" ;; ++ *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" +- dir="$dir$objdir" ++ func_append dir "$objdir" + + if test -n "$relink_command"; then ++ # Strip any trailing slash from the destination. ++ func_stripname '' '/' "$libdir" ++ destlibdir=$func_stripname_result ++ ++ func_stripname '' '/' "$destdir" ++ s_destdir=$func_stripname_result ++ + # Determine the prefix the user has applied to our future dir. +- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` ++ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that +@@ -2315,7 +3034,7 @@ func_mode_install () + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. +- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ++ test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) +@@ -2503,7 +3222,7 @@ func_mode_install () + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + +- if test -n "$current_libdirs" && $opt_finish; then ++ if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' +@@ -2512,7 +3231,7 @@ func_mode_install () + fi + } + +-test "$mode" = install && func_mode_install ${1+"$@"} ++test "$opt_mode" = install && func_mode_install ${1+"$@"} + + + # func_generate_dlsyms outputname originator pic_p +@@ -2559,6 +3278,18 @@ extern \"C\" { + #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" + #endif + ++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ ++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) ++/* DATA imports from DLLs on WIN32 con't be const, because runtime ++ relocations are performed -- see ld's documentation on pseudo-relocs. */ ++# define LT_DLSYM_CONST ++#elif defined(__osf__) ++/* This system does not cope well with relocations in const data. */ ++# define LT_DLSYM_CONST ++#else ++# define LT_DLSYM_CONST const ++#endif ++ + /* External symbol declarations for the compiler. */\ + " + +@@ -2570,21 +3301,22 @@ extern \"C\" { + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do +- func_verbose "extracting global C symbols from \`$progfile'" +- $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" ++ func_to_tool_file "$progfile" func_convert_file_msys_to_w32 ++ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" ++ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { +- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T +- $MV "$nlist"T "$nlist" ++ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { +- $EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T +- $MV "$nlist"T "$nlist" ++ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' + } + fi + +@@ -2593,23 +3325,23 @@ extern \"C\" { + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols +- ${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* $.*$$/\1/p' < "$nlist" > "$export_symbols" ++ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* $.*$$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) +- echo EXPORTS > "$output_objdir/$outputname.def" +- cat "$export_symbols" >> "$output_objdir/$outputname.def" ++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { +- ${SED} -e 's/$[].[*^$]$/\\\1/g' -e 's/^/ /' -e 's/$/$/' < "$export_symbols" > "$output_objdir/$outputname.exp" +- $GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T +- $MV "$nlist"T "$nlist" ++ eval "${SED} -e 's/$[].[*^$]$/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' ++ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) +- echo EXPORTS > "$output_objdir/$outputname.def" +- cat "$nlist" >> "$output_objdir/$outputname.def" ++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } +@@ -2620,10 +3352,52 @@ extern \"C\" { + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" +- $opt_dry_run || { +- $ECHO ": $name " >> "$nlist" +- eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" +- } ++ case $host in ++ *cygwin* | *mingw* | *cegcc* ) ++ # if an import library, we need to obtain dlname ++ if func_win32_import_lib_p "$dlprefile"; then ++ func_tr_sh "$dlprefile" ++ eval "curr_lafile=\$libfile_$func_tr_sh_result" ++ dlprefile_dlbasename="" ++ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then ++ # Use subshell, to avoid clobbering current variable values ++ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` ++ if test -n "$dlprefile_dlname" ; then ++ func_basename "$dlprefile_dlname" ++ dlprefile_dlbasename="$func_basename_result" ++ else ++ # no lafile. user explicitly requested -dlpreopen <import library>. ++ $sharedlib_from_linklib_cmd "$dlprefile" ++ dlprefile_dlbasename=$sharedlib_from_linklib_result ++ fi ++ fi ++ $opt_dry_run || { ++ if test -n "$dlprefile_dlbasename" ; then ++ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' ++ else ++ func_warning "Could not compute DLL name from $name" ++ eval '$ECHO ": $name " >> "$nlist"' ++ fi ++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 ++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | ++ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" ++ } ++ else # not an import lib ++ $opt_dry_run || { ++ eval '$ECHO ": $name " >> "$nlist"' ++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 ++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" ++ } ++ fi ++ ;; ++ *) ++ $opt_dry_run || { ++ eval '$ECHO ": $name " >> "$nlist"' ++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 ++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" ++ } ++ ;; ++ esac + done + + $opt_dry_run || { +@@ -2661,26 +3435,9 @@ typedef struct { + const char *name; + void *address; + } lt_dlsymlist; +-" +- case $host in +- *cygwin* | *mingw* | *cegcc* ) +- echo >> "$output_objdir/$my_dlsyms" "\ +-/* DATA imports from DLLs on WIN32 con't be const, because +- runtime relocations are performed -- see ld's documentation +- on pseudo-relocs. */" +- lt_dlsym_const= ;; +- *osf5*) +- echo >> "$output_objdir/$my_dlsyms" "\ +-/* This system does not cope well with relocations in const data */" +- lt_dlsym_const= ;; +- *) +- lt_dlsym_const=const ;; +- esac +- +- echo >> "$output_objdir/$my_dlsyms" "\ +-extern $lt_dlsym_const lt_dlsymlist ++extern LT_DLSYM_CONST lt_dlsymlist + lt_${my_prefix}_LTX_preloaded_symbols[]; +-$lt_dlsym_const lt_dlsymlist ++LT_DLSYM_CONST lt_dlsymlist + lt_${my_prefix}_LTX_preloaded_symbols[] = + {\ + { \"$my_originator\", (void *) 0 }," +@@ -2736,7 +3493,7 @@ static const void *lt_preloaded_setup() { + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; +- *) symtab_cflags="$symtab_cflags $arg" ;; ++ *) func_append symtab_cflags " $arg" ;; + esac + done + +@@ -2796,9 +3553,11 @@ func_win32_libid () + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static +- if $OBJDUMP -f "$1" | $SED -e '10q' 2>/dev/null | +- $EGREP 'file format (pe-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then +- win32_nmres=`$NM -f posix -A "$1" | ++ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. ++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | ++ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then ++ func_to_tool_file "$1" func_convert_file_msys_to_w32 ++ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ +@@ -2827,6 +3586,131 @@ func_win32_libid () + $ECHO "$win32_libid_type" + } + ++# func_cygming_dll_for_implib ARG ++# ++# Platform-specific function to extract the ++# name of the DLL associated with the specified ++# import library ARG. ++# Invoked by eval'ing the libtool variable ++# $sharedlib_from_linklib_cmd ++# Result is available in the variable ++# $sharedlib_from_linklib_result ++func_cygming_dll_for_implib () ++{ ++ $opt_debug ++ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` ++} ++ ++# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs ++# ++# The is the core of a fallback implementation of a ++# platform-specific function to extract the name of the ++# DLL associated with the specified import library LIBNAME. ++# ++# SECTION_NAME is either .idata$6 or .idata$7, depending ++# on the platform and compiler that created the implib. ++# ++# Echos the name of the DLL associated with the ++# specified import library. ++func_cygming_dll_for_implib_fallback_core () ++{ ++ $opt_debug ++ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` ++ $OBJDUMP -s --section "$1" "$2" 2>/dev/null | ++ $SED '/^Contents of section '"$match_literal"':/{ ++ # Place marker at beginning of archive member dllname section ++ s/.*/====MARK====/ ++ p ++ d ++ } ++ # These lines can sometimes be longer than 43 characters, but ++ # are always uninteresting ++ /:[ ]*file format pe[i]\{,1\}-/d ++ /^In archive [^:]*:/d ++ # Ensure marker is printed ++ /^====MARK====/p ++ # Remove all lines with less than 43 characters ++ /^.\{43\}/!d ++ # From remaining lines, remove first 43 characters ++ s/^.\{43\}//' | ++ $SED -n ' ++ # Join marker and all lines until next marker into a single line ++ /^====MARK====/ b para ++ H ++ $ b para ++ b ++ :para ++ x ++ s/\n//g ++ # Remove the marker ++ s/^====MARK====// ++ # Remove trailing dots and whitespace ++ s/[\. \t]*$// ++ # Print ++ /./p' | ++ # we now have a list, one entry per line, of the stringified ++ # contents of the appropriate section of all members of the ++ # archive which possess that section. Heuristic: eliminate ++ # all those which have a first or second character that is ++ # a '.' (that is, objdump's representation of an unprintable ++ # character.) This should work for all archives with less than ++ # 0x302f exports -- but will fail for DLLs whose name actually ++ # begins with a literal '.' or a single character followed by ++ # a '.'. ++ # ++ # Of those that remain, print the first one. ++ $SED -e '/^\./d;/^.\./d;q' ++} ++ ++# func_cygming_gnu_implib_p ARG ++# This predicate returns with zero status (TRUE) if ++# ARG is a GNU/binutils-style import library. Returns ++# with nonzero status (FALSE) otherwise. ++func_cygming_gnu_implib_p () ++{ ++ $opt_debug ++ func_to_tool_file "$1" func_convert_file_msys_to_w32 ++ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` ++ test -n "$func_cygming_gnu_implib_tmp" ++} ++ ++# func_cygming_ms_implib_p ARG ++# This predicate returns with zero status (TRUE) if ++# ARG is an MS-style import library. Returns ++# with nonzero status (FALSE) otherwise. ++func_cygming_ms_implib_p () ++{ ++ $opt_debug ++ func_to_tool_file "$1" func_convert_file_msys_to_w32 ++ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` ++ test -n "$func_cygming_ms_implib_tmp" ++} ++ ++# func_cygming_dll_for_implib_fallback ARG ++# Platform-specific function to extract the ++# name of the DLL associated with the specified ++# import library ARG. ++# ++# This fallback implementation is for use when $DLLTOOL ++# does not support the --identify-strict option. ++# Invoked by eval'ing the libtool variable ++# $sharedlib_from_linklib_cmd ++# Result is available in the variable ++# $sharedlib_from_linklib_result ++func_cygming_dll_for_implib_fallback () ++{ ++ $opt_debug ++ if func_cygming_gnu_implib_p "$1" ; then ++ # binutils import library ++ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` ++ elif func_cygming_ms_implib_p "$1" ; then ++ # ms-generated import library ++ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` ++ else ++ # unknown ++ sharedlib_from_linklib_result="" ++ fi ++} + + + # func_extract_an_archive dir oldlib +@@ -2917,7 +3801,7 @@ func_extract_archives () + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do +- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` ++ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ +@@ -2932,7 +3816,7 @@ func_extract_archives () + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac +- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` ++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +@@ -3014,7 +3898,110 @@ func_fallback_echo () + _LTECHO_EOF' + } + ECHO=\"$qECHO\" +- fi\ ++ fi ++ ++# Very basic option parsing. These options are (a) specific to ++# the libtool wrapper, (b) are identical between the wrapper ++# /script/ and the wrapper /executable/ which is used only on ++# windows platforms, and (c) all begin with the string "--lt-" ++# (application programs are unlikely to have options which match ++# this pattern). ++# ++# There are only two supported options: --lt-debug and ++# --lt-dump-script. There is, deliberately, no --lt-help. ++# ++# The first argument to this parsing function should be the ++# script's $0 value, followed by "$@". ++lt_option_debug= ++func_parse_lt_options () ++{ ++ lt_script_arg0=\$0 ++ shift ++ for lt_opt ++ do ++ case \"\$lt_opt\" in ++ --lt-debug) lt_option_debug=1 ;; ++ --lt-dump-script) ++ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` ++ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. ++ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` ++ cat \"\$lt_dump_D/\$lt_dump_F\" ++ exit 0 ++ ;; ++ --lt-*) ++ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 ++ exit 1 ++ ;; ++ esac ++ done ++ ++ # Print the debug banner immediately: ++ if test -n \"\$lt_option_debug\"; then ++ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 ++ fi ++} ++ ++# Used when --lt-debug. Prints its arguments to stdout ++# (redirection is the responsibility of the caller) ++func_lt_dump_args () ++{ ++ lt_dump_args_N=1; ++ for lt_arg ++ do ++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" ++ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` ++ done ++} ++ ++# Core function for launching the target application ++func_exec_program_core () ++{ ++" ++ case $host in ++ # Backslashes separate directories on plain windows ++ *-*-mingw | *-*-os2* | *-cegcc*) ++ $ECHO "\ ++ if test -n \"\$lt_option_debug\"; then ++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 ++ func_lt_dump_args \${1+\"\$@\"} 1>&2 ++ fi ++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} ++" ++ ;; ++ ++ *) ++ $ECHO "\ ++ if test -n \"\$lt_option_debug\"; then ++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 ++ func_lt_dump_args \${1+\"\$@\"} 1>&2 ++ fi ++ exec \"\$progdir/\$program\" \${1+\"\$@\"} ++" ++ ;; ++ esac ++ $ECHO "\ ++ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 ++ exit 1 ++} ++ ++# A function to encapsulate launching the target application ++# Strips options in the --lt-* namespace from \$@ and ++# launches target application with the remaining arguments. ++func_exec_program () ++{ ++ for lt_wr_arg ++ do ++ case \$lt_wr_arg in ++ --lt-*) ;; ++ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; ++ esac ++ shift ++ done ++ func_exec_program_core \${1+\"\$@\"} ++} ++ ++ # Parse options ++ func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` +@@ -3078,7 +4065,7 @@ _LTECHO_EOF' + + # relink executable if necessary + if test -n \"\$relink_command\"; then +- if relink_command_output=\`eval \"\$relink_command\" 2>&1\`; then : ++ if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" +@@ -3102,6 +4089,18 @@ _LTECHO_EOF' + + if test -f \"\$progdir/\$program\"; then" + ++ # fixup the dll searchpath if we need to. ++ # ++ # Fix the DLL searchpath if we need to. Do this before prepending ++ # to shlibpath, because on Windows, both are PATH and uninstalled ++ # libraries must come first. ++ if test -n "$dllsearchpath"; then ++ $ECHO "\ ++ # Add the dll search path components to the executable PATH ++ PATH=$dllsearchpath:\$PATH ++" ++ fi ++ + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ +@@ -3116,35 +4115,10 @@ _LTECHO_EOF' + " + fi + +- # fixup the dll searchpath if we need to. +- if test -n "$dllsearchpath"; then +- $ECHO "\ +- # Add the dll search path components to the executable PATH +- PATH=$dllsearchpath:\$PATH +-" +- fi +- + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +-" +- case $host in +- # Backslashes separate directories on plain windows +- *-*-mingw | *-*-os2* | *-cegcc*) +- $ECHO "\ +- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +-" +- ;; +- +- *) +- $ECHO "\ +- exec \"\$progdir/\$program\" \${1+\"\$@\"} +-" +- ;; +- esac +- $ECHO "\ +- \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 +- exit 1 ++ func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. +@@ -3158,166 +4132,6 @@ fi\ + } + + +-# func_to_host_path arg +-# +-# Convert paths to host format when used with build tools. +-# Intended for use with "native" mingw (where libtool itself +-# is running under the msys shell), or in the following cross- +-# build environments: +-# $build $host +-# mingw (msys) mingw [e.g. native] +-# cygwin mingw +-# *nix + wine mingw +-# where wine is equipped with the `winepath' executable. +-# In the native mingw case, the (msys) shell automatically +-# converts paths for any non-msys applications it launches, +-# but that facility isn't available from inside the cwrapper. +-# Similar accommodations are necessary for $host mingw and +-# $build cygwin. Calling this function does no harm for other +-# $host/$build combinations not listed above. +-# +-# ARG is the path (on $build) that should be converted to +-# the proper representation for $host. The result is stored +-# in $func_to_host_path_result. +-func_to_host_path () +-{ +- func_to_host_path_result="$1" +- if test -n "$1"; then +- case $host in +- *mingw* ) +- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' +- case $build in +- *mingw* ) # actually, msys +- # awkward: cmd appends spaces to result +- func_to_host_path_result=`( cmd //c echo "$1" ) 2>/dev/null | +- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +- ;; +- *cygwin* ) +- func_to_host_path_result=`cygpath -w "$1" | +- $SED -e "$lt_sed_naive_backslashify"` +- ;; +- * ) +- # Unfortunately, winepath does not exit with a non-zero +- # error code, so we are forced to check the contents of +- # stdout. On the other hand, if the command is not +- # found, the shell will set an exit code of 127 and print +- # *an error message* to stdout. So we must check for both +- # error code of zero AND non-empty stdout, which explains +- # the odd construction: +- func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` +- if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then +- func_to_host_path_result=`$ECHO "$func_to_host_path_tmp1" | +- $SED -e "$lt_sed_naive_backslashify"` +- else +- # Allow warning below. +- func_to_host_path_result= +- fi +- ;; +- esac +- if test -z "$func_to_host_path_result" ; then +- func_error "Could not determine host path corresponding to" +- func_error " \`$1'" +- func_error "Continuing, but uninstalled executables may not work." +- # Fallback: +- func_to_host_path_result="$1" +- fi +- ;; +- esac +- fi +-} +-# end: func_to_host_path +- +-# func_to_host_pathlist arg +-# +-# Convert pathlists to host format when used with build tools. +-# See func_to_host_path(), above. This function supports the +-# following $build/$host combinations (but does no harm for +-# combinations not listed here): +-# $build $host +-# mingw (msys) mingw [e.g. native] +-# cygwin mingw +-# *nix + wine mingw +-# +-# Path separators are also converted from $build format to +-# $host format. If ARG begins or ends with a path separator +-# character, it is preserved (but converted to $host format) +-# on output. +-# +-# ARG is a pathlist (on $build) that should be converted to +-# the proper representation on $host. The result is stored +-# in $func_to_host_pathlist_result. +-func_to_host_pathlist () +-{ +- func_to_host_pathlist_result="$1" +- if test -n "$1"; then +- case $host in +- *mingw* ) +- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' +- # Remove leading and trailing path separator characters from +- # ARG. msys behavior is inconsistent here, cygpath turns them +- # into '.;' and ';.', and winepath ignores them completely. +- func_stripname : : "$1" +- func_to_host_pathlist_tmp1=$func_stripname_result +- case $build in +- *mingw* ) # Actually, msys. +- # Awkward: cmd appends spaces to result. +- func_to_host_pathlist_result=` +- ( cmd //c echo "$func_to_host_pathlist_tmp1" ) 2>/dev/null | +- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +- ;; +- *cygwin* ) +- func_to_host_pathlist_result=`cygpath -w -p "$func_to_host_pathlist_tmp1" | +- $SED -e "$lt_sed_naive_backslashify"` +- ;; +- * ) +- # unfortunately, winepath doesn't convert pathlists +- func_to_host_pathlist_result="" +- func_to_host_pathlist_oldIFS=$IFS +- IFS=: +- for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do +- IFS=$func_to_host_pathlist_oldIFS +- if test -n "$func_to_host_pathlist_f" ; then +- func_to_host_path "$func_to_host_pathlist_f" +- if test -n "$func_to_host_path_result" ; then +- if test -z "$func_to_host_pathlist_result" ; then +- func_to_host_pathlist_result="$func_to_host_path_result" +- else +- func_append func_to_host_pathlist_result ";$func_to_host_path_result" +- fi +- fi +- fi +- done +- IFS=$func_to_host_pathlist_oldIFS +- ;; +- esac +- if test -z "$func_to_host_pathlist_result"; then +- func_error "Could not determine the host path(s) corresponding to" +- func_error " \`$1'" +- func_error "Continuing, but uninstalled executables may not work." +- # Fallback. This may break if $1 contains DOS-style drive +- # specifications. The fix is not to complicate the expression +- # below, but for the user to provide a working wine installation +- # with winepath so that path translation in the cross-to-mingw +- # case works properly. +- lt_replace_pathsep_nix_to_dos="s|:|;|g" +- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ +- $SED -e "$lt_replace_pathsep_nix_to_dos"` +- fi +- # Now, add the leading and trailing path separators back +- case "$1" in +- :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" +- ;; +- esac +- case "$1" in +- *: ) func_append func_to_host_pathlist_result ";" +- ;; +- esac +- ;; +- esac +- fi +-} +-# end: func_to_host_pathlist +- + # func_emit_cwrapperexe_src + # emit the source code for a wrapper executable on stdout + # Must ONLY be called from within func_mode_link because +@@ -3334,10 +4148,6 @@ func_emit_cwrapperexe_src () + + This wrapper executable should never be moved out of the build directory. + If it is, it will not operate correctly. +- +- Currently, it simply execs the wrapper *script* "$SHELL $output", +- but could eventually absorb all of the scripts functionality and +- exec $objdir/$outputname directly. + */ + EOF + cat <<"EOF" +@@ -3462,22 +4272,13 @@ int setenv (const char *, const char *, int); + if (stale) { free ((void *) stale); stale = 0; } \ + } while (0) + +-#undef LTWRAPPER_DEBUGPRINTF +-#if defined LT_DEBUGWRAPPER +-# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args +-static void +-ltwrapper_debugprintf (const char *fmt, ...) +-{ +- va_list args; +- va_start (args, fmt); +- (void) vfprintf (stderr, fmt, args); +- va_end (args); +-} ++#if defined(LT_DEBUGWRAPPER) ++static int lt_debug = 1; + #else +-# define LTWRAPPER_DEBUGPRINTF(args) ++static int lt_debug = 0; + #endif + +-const char *program_name = NULL; ++const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + + void *xmalloc (size_t num); + char *xstrdup (const char *string); +@@ -3487,7 +4288,10 @@ char *chase_symlinks (const char *pathspec); + int make_executable (const char *path); + int check_executable (const char *path); + char *strendzap (char *str, const char *pat); +-void lt_fatal (const char *message, ...); ++void lt_debugprintf (const char *file, int line, const char *fmt, ...); ++void lt_fatal (const char *file, int line, const char *message, ...); ++static const char *nonnull (const char *s); ++static const char *nonempty (const char *s); + void lt_setenv (const char *name, const char *value); + char *lt_extend_str (const char *orig_value, const char *add, int to_end); + void lt_update_exe_path (const char *name, const char *value); +@@ -3497,14 +4301,14 @@ void lt_dump_script (FILE *f); + EOF + + cat <<EOF +-const char * MAGIC_EXE = "$magic_exe"; ++volatile const char * MAGIC_EXE = "$magic_exe"; + const char * LIB_PATH_VARNAME = "$shlibpath_var"; + EOF + + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then +- func_to_host_pathlist "$temp_rpath" ++ func_to_host_path "$temp_rpath" + cat <<EOF +-const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result"; ++const char * LIB_PATH_VALUE = "$func_to_host_path_result"; + EOF + else + cat <<"EOF" +@@ -3513,10 +4317,10 @@ EOF + fi + + if test -n "$dllsearchpath"; then +- func_to_host_pathlist "$dllsearchpath:" ++ func_to_host_path "$dllsearchpath:" + cat <<EOF + const char * EXE_PATH_VARNAME = "PATH"; +-const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result"; ++const char * EXE_PATH_VALUE = "$func_to_host_path_result"; + EOF + else + cat <<"EOF" +@@ -3539,12 +4343,10 @@ EOF + cat <<"EOF" + + #define LTWRAPPER_OPTION_PREFIX "--lt-" +-#define LTWRAPPER_OPTION_PREFIX_LENGTH 5 + +-static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH; + static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; +- + static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; ++static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug"; + + int + main (int argc, char *argv[]) +@@ -3561,10 +4363,13 @@ main (int argc, char *argv[]) + int i; + + program_name = (char *) xstrdup (base_name (argv[0])); +- LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); +- LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); ++ newargz = XMALLOC (char *, argc + 1); + +- /* very simple arg parsing; don't want to rely on getopt */ ++ /* very simple arg parsing; don't want to rely on getopt ++ * also, copy all non cwrapper options to newargz, except ++ * argz[0], which is handled differently ++ */ ++ newargc=0; + for (i = 1; i < argc; i++) + { + if (strcmp (argv[i], dumpscript_opt) == 0) +@@ -3581,21 +4386,54 @@ EOF + lt_dump_script (stdout); + return 0; + } ++ if (strcmp (argv[i], debug_opt) == 0) ++ { ++ lt_debug = 1; ++ continue; ++ } ++ if (strcmp (argv[i], ltwrapper_option_prefix) == 0) ++ { ++ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX ++ namespace, but it is not one of the ones we know about and ++ have already dealt with, above (inluding dump-script), then ++ report an error. Otherwise, targets might begin to believe ++ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX ++ namespace. The first time any user complains about this, we'll ++ need to make LTWRAPPER_OPTION_PREFIX a configure-time option ++ or a configure.ac-settable value. ++ */ ++ lt_fatal (__FILE__, __LINE__, ++ "unrecognized %s option: '%s'", ++ ltwrapper_option_prefix, argv[i]); ++ } ++ /* otherwise ... */ ++ newargz[++newargc] = xstrdup (argv[i]); + } ++ newargz[++newargc] = NULL; ++ ++EOF ++ cat <<EOF ++ /* The GNU banner must be the first non-error debug message */ ++ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n"); ++EOF ++ cat <<"EOF" ++ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]); ++ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name); + +- newargz = XMALLOC (char *, argc + 1); + tmp_pathspec = find_executable (argv[0]); + if (tmp_pathspec == NULL) +- lt_fatal ("Couldn't find %s", argv[0]); +- LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", +- tmp_pathspec)); ++ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]); ++ lt_debugprintf (__FILE__, __LINE__, ++ "(main) found exe (before symlink chase) at: %s\n", ++ tmp_pathspec); + + actual_cwrapper_path = chase_symlinks (tmp_pathspec); +- LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", +- actual_cwrapper_path)); ++ lt_debugprintf (__FILE__, __LINE__, ++ "(main) found exe (after symlink chase) at: %s\n", ++ actual_cwrapper_path); + XFREE (tmp_pathspec); + +- actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path)); ++ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path)); + strendzap (actual_cwrapper_path, actual_cwrapper_name); + + /* wrapper name transforms */ +@@ -3613,8 +4451,9 @@ EOF + target_name = tmp_pathspec; + tmp_pathspec = 0; + +- LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n", +- target_name)); ++ lt_debugprintf (__FILE__, __LINE__, ++ "(main) libtool target name: %s\n", ++ target_name); + EOF + + cat <<EOF +@@ -3664,35 +4503,19 @@ EOF + + lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ + lt_setenv ("DUALCASE", "1"); /* for MSK sh */ +- lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); ++ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must ++ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath) ++ because on Windows, both *_VARNAMEs are PATH but uninstalled ++ libraries must come first. */ + lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); ++ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); + +- newargc=0; +- for (i = 1; i < argc; i++) +- { +- if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0) +- { +- /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX +- namespace, but it is not one of the ones we know about and +- have already dealt with, above (inluding dump-script), then +- report an error. Otherwise, targets might begin to believe +- they are allowed to use options in the LTWRAPPER_OPTION_PREFIX +- namespace. The first time any user complains about this, we'll +- need to make LTWRAPPER_OPTION_PREFIX a configure-time option +- or a configure.ac-settable value. +- */ +- lt_fatal ("Unrecognized option in %s namespace: '%s'", +- ltwrapper_option_prefix, argv[i]); +- } +- /* otherwise ... */ +- newargz[++newargc] = xstrdup (argv[i]); +- } +- newargz[++newargc] = NULL; +- +- LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>"))); ++ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n", ++ nonnull (lt_argv_zero)); + for (i = 0; i < newargc; i++) + { +- LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>"))); ++ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n", ++ i, nonnull (newargz[i])); + } + + EOF +@@ -3706,7 +4529,9 @@ EOF + if (rval == -1) + { + /* failed to start process */ +- LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); ++ lt_debugprintf (__FILE__, __LINE__, ++ "(main) failed to launch target \"%s\": %s\n", ++ lt_argv_zero, nonnull (strerror (errno))); + return 127; + } + return rval; +@@ -3728,7 +4553,7 @@ xmalloc (size_t num) + { + void *p = (void *) malloc (num); + if (!p) +- lt_fatal ("Memory exhausted"); ++ lt_fatal (__FILE__, __LINE__, "memory exhausted"); + + return p; + } +@@ -3762,8 +4587,8 @@ check_executable (const char *path) + { + struct stat st; + +- LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", +- path ? (*path ? path : "EMPTY!") : "NULL!")); ++ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n", ++ nonempty (path)); + if ((!path) || (!*path)) + return 0; + +@@ -3780,8 +4605,8 @@ make_executable (const char *path) + int rval = 0; + struct stat st; + +- LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", +- path ? (*path ? path : "EMPTY!") : "NULL!")); ++ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", ++ nonempty (path)); + if ((!path) || (!*path)) + return 0; + +@@ -3807,8 +4632,8 @@ find_executable (const char *wrapper) + int tmp_len; + char *concat_name; + +- LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", +- wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); ++ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", ++ nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; +@@ -3861,7 +4686,8 @@ find_executable (const char *wrapper) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) +- lt_fatal ("getcwd failed"); ++ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", ++ nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); +@@ -3886,7 +4712,8 @@ find_executable (const char *wrapper) + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) +- lt_fatal ("getcwd failed"); ++ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", ++ nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); +@@ -3912,8 +4739,9 @@ chase_symlinks (const char *pathspec) + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { +- LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", +- tmp_pathspec)); ++ lt_debugprintf (__FILE__, __LINE__, ++ "checking path component for symlinks: %s\n", ++ tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) +@@ -3935,8 +4763,9 @@ chase_symlinks (const char *pathspec) + } + else + { +- char *errstr = strerror (errno); +- lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); ++ lt_fatal (__FILE__, __LINE__, ++ "error accessing file \"%s\": %s", ++ tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); +@@ -3949,7 +4778,8 @@ chase_symlinks (const char *pathspec) + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { +- lt_fatal ("Could not follow symlinks for %s", pathspec); ++ lt_fatal (__FILE__, __LINE__, ++ "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); + #endif +@@ -3975,11 +4805,25 @@ strendzap (char *str, const char *pat) + return str; + } + ++void ++lt_debugprintf (const char *file, int line, const char *fmt, ...) ++{ ++ va_list args; ++ if (lt_debug) ++ { ++ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); ++ va_start (args, fmt); ++ (void) vfprintf (stderr, fmt, args); ++ va_end (args); ++ } ++} ++ + static void +-lt_error_core (int exit_status, const char *mode, ++lt_error_core (int exit_status, const char *file, ++ int line, const char *mode, + const char *message, va_list ap) + { +- fprintf (stderr, "%s: %s: ", program_name, mode); ++ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + +@@ -3988,20 +4832,32 @@ lt_error_core (int exit_status, const char *mode, + } + + void +-lt_fatal (const char *message, ...) ++lt_fatal (const char *file, int line, const char *message, ...) + { + va_list ap; + va_start (ap, message); +- lt_error_core (EXIT_FAILURE, "FATAL", message, ap); ++ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); + } + ++static const char * ++nonnull (const char *s) ++{ ++ return s ? s : "(null)"; ++} ++ ++static const char * ++nonempty (const char *s) ++{ ++ return (s && !*s) ? "(empty)" : nonnull (s); ++} ++ + void + lt_setenv (const char *name, const char *value) + { +- LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", +- (name ? name : "<NULL>"), +- (value ? value : "<NULL>"))); ++ lt_debugprintf (__FILE__, __LINE__, ++ "(lt_setenv) setting '%s' to '%s'\n", ++ nonnull (name), nonnull (value)); + { + #ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ +@@ -4049,9 +4905,9 @@ lt_extend_str (const char *orig_value, const char *add, int to_end) + void + lt_update_exe_path (const char *name, const char *value) + { +- LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", +- (name ? name : "<NULL>"), +- (value ? value : "<NULL>"))); ++ lt_debugprintf (__FILE__, __LINE__, ++ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", ++ nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { +@@ -4070,9 +4926,9 @@ lt_update_exe_path (const char *name, const char *value) + void + lt_update_lib_path (const char *name, const char *value) + { +- LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", +- (name ? name : "<NULL>"), +- (value ? value : "<NULL>"))); ++ lt_debugprintf (__FILE__, __LINE__, ++ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", ++ nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { +@@ -4222,7 +5078,7 @@ EOF + func_win32_import_lib_p () + { + $opt_debug +- case `eval "$file_magic_cmd \"\$1\" 2>/dev/null" | $SED -e 10q` in ++ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +@@ -4401,9 +5257,9 @@ func_mode_link () + ;; + *) + if test "$prev" = dlfiles; then +- dlfiles="$dlfiles $arg" ++ func_append dlfiles " $arg" + else +- dlprefiles="$dlprefiles $arg" ++ func_append dlprefiles " $arg" + fi + prev= + continue +@@ -4427,7 +5283,7 @@ func_mode_link () + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; +- *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ++ *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; +@@ -4446,7 +5302,7 @@ func_mode_link () + moreargs= + for fil in `cat "$save_arg"` + do +-# moreargs="$moreargs $fil" ++# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + +@@ -4475,7 +5331,7 @@ func_mode_link () + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $pic_object" ++ func_append dlfiles " $pic_object" + prev= + continue + else +@@ -4487,7 +5343,7 @@ func_mode_link () + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. +- dlprefiles="$dlprefiles $pic_object" ++ func_append dlprefiles " $pic_object" + prev= + fi + +@@ -4557,12 +5413,12 @@ func_mode_link () + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; +- *) rpath="$rpath $arg" ;; ++ *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; +- *) xrpath="$xrpath $arg" ;; ++ *) func_append xrpath " $arg" ;; + esac + fi + prev= +@@ -4574,28 +5430,28 @@ func_mode_link () + continue + ;; + weak) +- weak_libs="$weak_libs $arg" ++ func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $qarg" ++ func_append linker_flags " $qarg" ++ func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) +- compiler_flags="$compiler_flags $qarg" ++ func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $wl$qarg" ++ func_append linker_flags " $qarg" ++ func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" +@@ -4686,15 +5542,16 @@ func_mode_link () + ;; + + -L*) +- func_stripname '-L' '' "$arg" +- dir=$func_stripname_result +- if test -z "$dir"; then ++ func_stripname "-L" '' "$arg" ++ if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi ++ func_resolve_sysroot "$func_stripname_result" ++ dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; +@@ -4706,10 +5563,16 @@ func_mode_link () + ;; + esac + case "$deplibs " in +- *" -L$dir "*) ;; ++ *" -L$dir "* | *" $arg "*) ++ # Will only happen for absolute or sysroot arguments ++ ;; + *) +- deplibs="$deplibs -L$dir" +- lib_search_path="$lib_search_path $dir" ++ # Preserve sysroot, but never include relative directories ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; ++ *) func_append deplibs " -L$dir" ;; ++ esac ++ func_append lib_search_path " $dir" + ;; + esac + case $host in +@@ -4718,12 +5581,12 @@ func_mode_link () + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; +- *) dllsearchpath="$dllsearchpath:$dir";; ++ *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; +- *) dllsearchpath="$dllsearchpath:$testbindir";; ++ *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac +@@ -4747,7 +5610,7 @@ func_mode_link () + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework +- deplibs="$deplibs System.ltframework" ++ func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) +@@ -4758,9 +5621,6 @@ func_mode_link () + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; +- *-*-linux*) +- test "X$arg" = "X-lc" && continue +- ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in +@@ -4770,7 +5630,7 @@ func_mode_link () + ;; + esac + fi +- deplibs="$deplibs $arg" ++ func_append deplibs " $arg" + continue + ;; + +@@ -4782,8 +5642,8 @@ func_mode_link () + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. +- -model|-arch|-isysroot) +- compiler_flags="$compiler_flags $arg" ++ -model|-arch|-isysroot|--sysroot) ++ func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler +@@ -4791,12 +5651,12 @@ func_mode_link () + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) +- compiler_flags="$compiler_flags $arg" ++ func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; +- * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; ++ * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; +@@ -4863,13 +5723,17 @@ func_mode_link () + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; ++ =*) ++ func_stripname '=' '' "$dir" ++ dir=$lt_sysroot$func_stripname_result ++ ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; ++ *) func_append xrpath " $dir" ;; + esac + continue + ;; +@@ -4922,8 +5786,8 @@ func_mode_link () + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" +- arg="$arg $func_quote_for_eval_result" +- compiler_flags="$compiler_flags $func_quote_for_eval_result" ++ func_append arg " $func_quote_for_eval_result" ++ func_append compiler_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" +@@ -4938,9 +5802,9 @@ func_mode_link () + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" +- arg="$arg $wl$func_quote_for_eval_result" +- compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" +- linker_flags="$linker_flags $func_quote_for_eval_result" ++ func_append arg " $wl$func_quote_for_eval_result" ++ func_append compiler_flags " $wl$func_quote_for_eval_result" ++ func_append linker_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" +@@ -4968,24 +5832,27 @@ func_mode_link () + arg="$func_quote_for_eval_result" + ;; + +- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler +- # -r[0-9][0-9]* specifies the processor on the SGI compiler +- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler +- # +DA*, +DD* enable 64-bit mode on the HP compiler +- # -q* pass through compiler args for the IBM compiler +- # -m*, -t[45]*, -txscale* pass through architecture-specific +- # compiler args for GCC +- # -F/path gives path to uninstalled frameworks, gcc on darwin +- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC +- # @file GCC response files +- # -tp=* Portland pgcc target processor selection ++ # Flags to be passed through unchanged, with rationale: ++ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler ++ # -r[0-9][0-9]* specify processor for the SGI compiler ++ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler ++ # +DA*, +DD* enable 64-bit mode for the HP compiler ++ # -q* compiler args for the IBM compiler ++ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC ++ # -F/path path to uninstalled frameworks, gcc on darwin ++ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC ++ # @file GCC response files ++ # -tp=* Portland pgcc target processor selection ++ # --sysroot=* for sysroot support ++ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ +- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*) ++ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ ++ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" +- compiler_flags="$compiler_flags $arg" ++ func_append compiler_flags " $arg" + continue + ;; + +@@ -4997,7 +5864,7 @@ func_mode_link () + + *.$objext) + # A standard object. +- objs="$objs $arg" ++ func_append objs " $arg" + ;; + + *.lo) +@@ -5028,7 +5895,7 @@ func_mode_link () + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $pic_object" ++ func_append dlfiles " $pic_object" + prev= + continue + else +@@ -5040,7 +5907,7 @@ func_mode_link () + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. +- dlprefiles="$dlprefiles $pic_object" ++ func_append dlprefiles " $pic_object" + prev= + fi + +@@ -5085,24 +5952,25 @@ func_mode_link () + + *.$libext) + # An archive. +- deplibs="$deplibs $arg" +- old_deplibs="$old_deplibs $arg" ++ func_append deplibs " $arg" ++ func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + ++ func_resolve_sysroot "$arg" + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. +- dlfiles="$dlfiles $arg" ++ func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. +- dlprefiles="$dlprefiles $arg" ++ func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else +- deplibs="$deplibs $arg" ++ func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; +@@ -5127,7 +5995,7 @@ func_mode_link () + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then +- eval "arg=\"$export_dynamic_flag_spec\"" ++ eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi +@@ -5144,11 +6012,13 @@ func_mode_link () + else + shlib_search_path= + fi +- eval "sys_lib_search_path=\"$sys_lib_search_path_spec\"" +- eval "sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"" ++ eval sys_lib_search_path=\"$sys_lib_search_path_spec\" ++ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" ++ func_to_tool_file "$output_objdir/" ++ tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + +@@ -5169,12 +6039,12 @@ func_mode_link () + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do +- if $opt_duplicate_deps ; then ++ if $opt_preserve_dup_deps ; then + case "$libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi +- libs="$libs $deplib" ++ func_append libs " $deplib" + done + + if test "$linkmode" = lib; then +@@ -5187,9 +6057,9 @@ func_mode_link () + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in +- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; ++ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac +- pre_post_deps="$pre_post_deps $pre_post_dep" ++ func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= +@@ -5256,8 +6126,9 @@ func_mode_link () + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= ++ func_resolve_sysroot "$lib" + case $lib in +- *.la) func_source "$lib" ;; ++ *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library +@@ -5267,7 +6138,7 @@ func_mode_link () + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; +- *) deplibs="$deplibs $deplib" ;; ++ *) func_append deplibs " $deplib" ;; + esac + done + done +@@ -5288,11 +6159,11 @@ func_mode_link () + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else +- compiler_flags="$compiler_flags $deplib" ++ func_append compiler_flags " $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; +- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; ++ * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi +@@ -5377,7 +6248,7 @@ func_mode_link () + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; +- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; ++ * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi +@@ -5390,7 +6261,8 @@ func_mode_link () + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" +- newlib_search_path="$newlib_search_path $func_stripname_result" ++ func_resolve_sysroot "$func_stripname_result" ++ func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test "$pass" = conv; then +@@ -5404,7 +6276,8 @@ func_mode_link () + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" +- newlib_search_path="$newlib_search_path $func_stripname_result" ++ func_resolve_sysroot "$func_stripname_result" ++ func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" +@@ -5415,17 +6288,21 @@ func_mode_link () + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" +- dir=$func_stripname_result ++ func_resolve_sysroot "$func_stripname_result" ++ dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; ++ *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; +- *.la) lib="$deplib" ;; ++ *.la) ++ func_resolve_sysroot "$deplib" ++ lib=$func_resolve_sysroot_result ++ ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" +@@ -5488,11 +6365,11 @@ func_mode_link () + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. +- newdlprefiles="$newdlprefiles $deplib" ++ func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else +- newdlfiles="$newdlfiles $deplib" ++ func_append newdlfiles " $deplib" + fi + fi + continue +@@ -5538,7 +6415,7 @@ func_mode_link () + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; +- *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; ++ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi +@@ -5546,8 +6423,8 @@ func_mode_link () + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then +- test -n "$dlopen" && dlfiles="$dlfiles $dlopen" +- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" ++ test -n "$dlopen" && func_append dlfiles " $dlopen" ++ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test "$pass" = conv; then +@@ -5558,20 +6435,20 @@ func_mode_link () + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. +- convenience="$convenience $ladir/$objdir/$old_library" +- old_convenience="$old_convenience $ladir/$objdir/$old_library" ++ func_append convenience " $ladir/$objdir/$old_library" ++ func_append old_convenience " $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" +- if $opt_duplicate_deps ; then ++ if $opt_preserve_dup_deps ; then + case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi +- tmp_libs="$tmp_libs $deplib" ++ func_append tmp_libs " $deplib" + done + continue + fi # $pass = conv +@@ -5579,9 +6456,15 @@ func_mode_link () + + # Get the name of the library we link against. + linklib= +- for l in $old_library $library_names; do +- linklib="$l" +- done ++ if test -n "$old_library" && ++ { test "$prefer_static_libs" = yes || ++ test "$prefer_static_libs,$installed" = "built,no"; }; then ++ linklib=$old_library ++ else ++ for l in $old_library $library_names; do ++ linklib="$l" ++ done ++ fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi +@@ -5598,9 +6481,9 @@ func_mode_link () + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. +- dlprefiles="$dlprefiles $lib $dependency_libs" ++ func_append dlprefiles " $lib $dependency_libs" + else +- newdlfiles="$newdlfiles $lib" ++ func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen +@@ -5622,14 +6505,14 @@ func_mode_link () + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then +- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else +- dir="$libdir" +- absdir="$libdir" ++ dir="$lt_sysroot$libdir" ++ absdir="$lt_sysroot$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else +@@ -5637,12 +6520,12 @@ func_mode_link () + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" ++ func_append notinst_path " $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" ++ func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" +@@ -5653,20 +6536,46 @@ func_mode_link () + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi +- # Prefer using a static library (so that no silly _DYNAMIC symbols +- # are required to link). +- if test -n "$old_library"; then +- newdlprefiles="$newdlprefiles $dir/$old_library" +- # Keep a list of preopened convenience libraries to check +- # that they are being used correctly in the link pass. +- test -z "$libdir" && \ +- dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" +- # Otherwise, use the dlname, so that lt_dlopen finds it. +- elif test -n "$dlname"; then +- newdlprefiles="$newdlprefiles $dir/$dlname" +- else +- newdlprefiles="$newdlprefiles $dir/$linklib" +- fi ++ case "$host" in ++ # special handling for platforms with PE-DLLs. ++ *cygwin* | *mingw* | *cegcc* ) ++ # Linker will automatically link against shared library if both ++ # static and shared are present. Therefore, ensure we extract ++ # symbols from the import library if a shared library is present ++ # (otherwise, the dlopen module name will be incorrect). We do ++ # this by putting the import library name into $newdlprefiles. ++ # We recover the dlopen module name by 'saving' the la file ++ # name in a special purpose variable, and (later) extracting the ++ # dlname from the la file. ++ if test -n "$dlname"; then ++ func_tr_sh "$dir/$linklib" ++ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" ++ func_append newdlprefiles " $dir/$linklib" ++ else ++ func_append newdlprefiles " $dir/$old_library" ++ # Keep a list of preopened convenience libraries to check ++ # that they are being used correctly in the link pass. ++ test -z "$libdir" && \ ++ func_append dlpreconveniencelibs " $dir/$old_library" ++ fi ++ ;; ++ * ) ++ # Prefer using a static library (so that no silly _DYNAMIC symbols ++ # are required to link). ++ if test -n "$old_library"; then ++ func_append newdlprefiles " $dir/$old_library" ++ # Keep a list of preopened convenience libraries to check ++ # that they are being used correctly in the link pass. ++ test -z "$libdir" && \ ++ func_append dlpreconveniencelibs " $dir/$old_library" ++ # Otherwise, use the dlname, so that lt_dlopen finds it. ++ elif test -n "$dlname"; then ++ func_append newdlprefiles " $dir/$dlname" ++ else ++ func_append newdlprefiles " $dir/$linklib" ++ fi ++ ;; ++ esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then +@@ -5684,7 +6593,7 @@ func_mode_link () + + + if test "$linkmode" = prog && test "$pass" != link; then +- newlib_search_path="$newlib_search_path $ladir" ++ func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no +@@ -5697,7 +6606,8 @@ func_mode_link () + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" +- newlib_search_path="$newlib_search_path $func_stripname_result" ++ func_resolve_sysroot "$func_stripname_result" ++ func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? +@@ -5708,12 +6618,12 @@ func_mode_link () + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi +- if $opt_duplicate_deps ; then ++ if $opt_preserve_dup_deps ; then + case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi +- tmp_libs="$tmp_libs $deplib" ++ func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... +@@ -5728,7 +6638,7 @@ func_mode_link () + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; +- *) temp_rpath="$temp_rpath$absdir:" ;; ++ *) func_append temp_rpath "$absdir:" ;; + esac + fi + +@@ -5740,7 +6650,7 @@ func_mode_link () + *) + case "$compile_rpath " in + *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" ++ *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac +@@ -5749,7 +6659,7 @@ func_mode_link () + *) + case "$finalize_rpath " in + *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ++ *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac +@@ -5774,12 +6684,12 @@ func_mode_link () + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded +- notinst_deplibs="$notinst_deplibs $lib" ++ func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then +- notinst_deplibs="$notinst_deplibs $lib" ++ func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; +@@ -5814,7 +6724,7 @@ func_mode_link () + *) + case "$compile_rpath " in + *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" ++ *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac +@@ -5823,7 +6733,7 @@ func_mode_link () + *) + case "$finalize_rpath " in + *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ++ *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac +@@ -5835,7 +6745,7 @@ func_mode_link () + shift + realname="$1" + shift +- eval "libname=\"$libname_spec\"" ++ libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" +@@ -5848,7 +6758,7 @@ func_mode_link () + versuffix="-$major" + ;; + esac +- eval "soname=\"$soname_spec\"" ++ eval soname=\"$soname_spec\" + else + soname="$realname" + fi +@@ -5877,7 +6787,7 @@ func_mode_link () + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + +- if test "$linkmode" = prog || test "$mode" != relink; then ++ if test "$linkmode" = prog || test "$opt_mode" != relink; then + add_shlibpath= + add_dir= + add= +@@ -5933,7 +6843,7 @@ func_mode_link () + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) +- add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi +@@ -5955,7 +6865,7 @@ func_mode_link () + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; +- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; ++ *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then +@@ -5969,13 +6879,13 @@ func_mode_link () + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; +- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + +- if test "$linkmode" = prog || test "$mode" = relink; then ++ if test "$linkmode" = prog || test "$opt_mode" = relink; then + add_shlibpath= + add_dir= + add= +@@ -5989,7 +6899,7 @@ func_mode_link () + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; +- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ *) func_append finalize_shlibpath "$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then +@@ -6001,12 +6911,12 @@ func_mode_link () + fi + else + # We cannot seem to hardcode it, guess we'll fake it. +- add_dir="-L$libdir" ++ add_dir="-L$lt_sysroot$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) +- add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi +@@ -6083,27 +6993,33 @@ func_mode_link () + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; +- *) xrpath="$xrpath $temp_xrpath";; ++ *) func_append xrpath " $temp_xrpath";; + esac;; +- *) temp_deplibs="$temp_deplibs $libdir";; ++ *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + +- newlib_search_path="$newlib_search_path $absdir" ++ func_append newlib_search_path " $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" +- if $opt_duplicate_deps ; then ++ case $deplib in ++ -L*) func_stripname '-L' '' "$deplib" ++ func_resolve_sysroot "$func_stripname_result";; ++ *) func_resolve_sysroot "$deplib" ;; ++ esac ++ if $opt_preserve_dup_deps ; then + case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ *" $func_resolve_sysroot_result "*) ++ func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi +- tmp_libs="$tmp_libs $deplib" ++ func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test "$link_all_deplibs" != no; then +@@ -6113,8 +7029,10 @@ func_mode_link () + case $deplib in + -L*) path="$deplib" ;; + *.la) ++ func_resolve_sysroot "$deplib" ++ deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." +- dir="$func_dirname_result" ++ dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; +@@ -6130,7 +7048,7 @@ func_mode_link () + case $host in + *-*-darwin*) + depdepl= +- deplibrary_names=`${SED} -n -e 's/^library_names=$.*$$/\1/p' $deplib` ++ eval deplibrary_names=`${SED} -n -e 's/^library_names=$.*$$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp +@@ -6141,8 +7059,8 @@ func_mode_link () + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi +- compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" +- linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" ++ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" ++ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi +@@ -6152,7 +7070,7 @@ func_mode_link () + ;; + esac + else +- libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` ++ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ +@@ -6192,7 +7110,7 @@ func_mode_link () + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; +- *) lib_search_path="$lib_search_path $dir" ;; ++ *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= +@@ -6205,7 +7123,7 @@ func_mode_link () + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order +- eval tmp_libs=\$$var ++ eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so +@@ -6250,13 +7168,13 @@ func_mode_link () + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; +- *) tmp_libs="$tmp_libs $deplib" ;; ++ *) func_append tmp_libs " $deplib" ;; + esac + ;; +- *) tmp_libs="$tmp_libs $deplib" ;; ++ *) func_append tmp_libs " $deplib" ;; + esac + done +- eval $var=\$tmp_libs ++ eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs +@@ -6269,7 +7187,7 @@ func_mode_link () + ;; + esac + if test -n "$i" ; then +- tmp_libs="$tmp_libs $i" ++ func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs +@@ -6310,7 +7228,7 @@ func_mode_link () + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" +- objs="$objs$old_deplibs" ++ func_append objs "$old_deplibs" + ;; + + lib) +@@ -6319,8 +7237,8 @@ func_mode_link () + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result +- eval "shared_ext=\"$shrext_cmds\"" +- eval "libname=\"$libname_spec\"" ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ +@@ -6330,8 +7248,8 @@ func_mode_link () + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result +- eval "shared_ext=\"$shrext_cmds\"" +- eval "libname=\"$libname_spec\"" ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result +@@ -6346,7 +7264,7 @@ func_mode_link () + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" +- libobjs="$libobjs $objs" ++ func_append libobjs " $objs" + fi + fi + +@@ -6544,7 +7462,7 @@ func_mode_link () + done + + # Make executables depend on our current version. +- verstring="$verstring:${current}.0" ++ func_append verstring ":${current}.0" + ;; + + qnx) +@@ -6612,10 +7530,10 @@ func_mode_link () + fi + + func_generate_dlsyms "$libname" "$libname" "yes" +- libobjs="$libobjs $symfileobj" ++ func_append libobjs " $symfileobj" + test "X$libobjs" = "X " && libobjs= + +- if test "$mode" != relink; then ++ if test "$opt_mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= +@@ -6631,7 +7549,7 @@ func_mode_link () + continue + fi + fi +- removelist="$removelist $p" ++ func_append removelist " $p" + ;; + *) ;; + esac +@@ -6642,7 +7560,7 @@ func_mode_link () + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then +- oldlibs="$oldlibs $output_objdir/$libname.$libext" ++ func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` +@@ -6659,10 +7577,11 @@ func_mode_link () + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do +- temp_xrpath="$temp_xrpath -R$libdir" ++ func_replace_sysroot "$libdir" ++ func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ;; ++ *) func_append finalize_rpath " $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then +@@ -6676,7 +7595,7 @@ func_mode_link () + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; +- *) dlfiles="$dlfiles $lib" ;; ++ *) func_append dlfiles " $lib" ;; + esac + done + +@@ -6686,7 +7605,7 @@ func_mode_link () + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; +- *) dlprefiles="$dlprefiles $lib" ;; ++ *) func_append dlprefiles " $lib" ;; + esac + done + +@@ -6698,7 +7617,7 @@ func_mode_link () + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework +- deplibs="$deplibs System.ltframework" ++ func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. +@@ -6715,7 +7634,7 @@ func_mode_link () + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then +- deplibs="$deplibs -lc" ++ func_append deplibs " -lc" + fi + ;; + esac +@@ -6764,18 +7683,18 @@ EOF + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) +- newdeplibs="$newdeplibs $i" ++ func_append newdeplibs " $i" + i="" + ;; + esac + fi + if test -n "$i" ; then +- eval "libname=\"$libname_spec\"" +- eval "deplib_matches=\"$library_names_spec\"" ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then +- newdeplibs="$newdeplibs $i" ++ func_append newdeplibs " $i" + else + droppeddeps=yes + echo +@@ -6789,7 +7708,7 @@ EOF + fi + ;; + *) +- newdeplibs="$newdeplibs $i" ++ func_append newdeplibs " $i" + ;; + esac + done +@@ -6807,18 +7726,18 @@ EOF + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) +- newdeplibs="$newdeplibs $i" ++ func_append newdeplibs " $i" + i="" + ;; + esac + fi + if test -n "$i" ; then +- eval "libname=\"$libname_spec\"" +- eval "deplib_matches=\"$library_names_spec\"" ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then +- newdeplibs="$newdeplibs $i" ++ func_append newdeplibs " $i" + else + droppeddeps=yes + echo +@@ -6840,7 +7759,7 @@ EOF + fi + ;; + *) +- newdeplibs="$newdeplibs $i" ++ func_append newdeplibs " $i" + ;; + esac + done +@@ -6857,15 +7776,27 @@ EOF + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) +- newdeplibs="$newdeplibs $a_deplib" ++ func_append newdeplibs " $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then +- eval "libname=\"$libname_spec\"" ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ if test -n "$file_magic_glob"; then ++ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` ++ else ++ libnameglob=$libname ++ fi ++ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ if test "$want_nocaseglob" = yes; then ++ shopt -s nocaseglob ++ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` ++ $nocaseglob ++ else ++ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` ++ fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | +@@ -6885,10 +7816,10 @@ EOF + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done +- if eval "$file_magic_cmd \"\$potlib\"" 2>/dev/null | ++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" ++ func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi +@@ -6913,7 +7844,7 @@ EOF + ;; + *) + # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" ++ func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. +@@ -6929,20 +7860,20 @@ EOF + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) +- newdeplibs="$newdeplibs $a_deplib" ++ func_append newdeplibs " $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then +- eval "libname=\"$libname_spec\"" ++ libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" ++ func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi +@@ -6967,7 +7898,7 @@ EOF + ;; + *) + # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" ++ func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. +@@ -7071,7 +8002,7 @@ EOF + *) + case " $deplibs " in + *" -L$path/$objdir "*) +- new_libs="$new_libs -L$path/$objdir" ;; ++ func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac +@@ -7081,10 +8012,10 @@ EOF + -L*) + case " $new_libs " in + *" $deplib "*) ;; +- *) new_libs="$new_libs $deplib" ;; ++ *) func_append new_libs " $deplib" ;; + esac + ;; +- *) new_libs="$new_libs $deplib" ;; ++ *) func_append new_libs " $deplib" ;; + esac + done + deplibs="$new_libs" +@@ -7101,10 +8032,12 @@ EOF + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" +- test "$mode" != relink && rpath="$compile_rpath$rpath" ++ test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then ++ func_replace_sysroot "$libdir" ++ libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else +@@ -7113,18 +8046,18 @@ EOF + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else +- eval "flag=\"$hardcode_libdir_flag_spec\"" +- dep_rpath="$dep_rpath $flag" ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; ++ *) func_append perm_rpath " $libdir" ;; + esac + fi + done +@@ -7133,40 +8066,38 @@ EOF + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then +- eval "dep_rpath=\"$hardcode_libdir_flag_spec_ld\"" ++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else +- eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" ++ eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do +- rpath="$rpath$dir:" ++ func_append rpath "$dir:" + done +- eval $runpath_var=\$rpath\$$runpath_var +- export $runpath_var ++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" +- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" ++ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then +- eval $shlibpath_var=\$shlibpath\$$shlibpath_var +- export $shlibpath_var ++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. +- eval "shared_ext=\"$shrext_cmds\"" +- eval "library_names=\"$library_names_spec\"" ++ eval shared_ext=\"$shrext_cmds\" ++ eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then +- eval "soname=\"$soname_spec\"" ++ eval soname=\"$soname_spec\" + else + soname="$realname" + fi +@@ -7178,7 +8109,7 @@ EOF + linknames= + for link + do +- linknames="$linknames $link" ++ func_append linknames " $link" + done + + # Use standard objects if they are pic +@@ -7189,7 +8120,7 @@ EOF + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" +- delfiles="$delfiles $export_symbols" ++ func_append delfiles " $export_symbols" + fi + + orig_export_symbols= +@@ -7220,13 +8151,45 @@ EOF + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do ++ for cmd1 in $cmds; do + IFS="$save_ifs" +- eval "cmd=\"$cmd\"" +- func_len " $cmd" +- len=$func_len_result +- if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ # Take the normal branch if the nm_file_list_spec branch ++ # doesn't work or if tool conversion is not needed. ++ case $nm_file_list_spec~$to_tool_file_cmd in ++ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) ++ try_normal_branch=yes ++ eval cmd=\"$cmd1\" ++ func_len " $cmd" ++ len=$func_len_result ++ ;; ++ *) ++ try_normal_branch=no ++ ;; ++ esac ++ if test "$try_normal_branch" = yes \ ++ && { test "$len" -lt "$max_cmd_len" \ ++ || test "$max_cmd_len" -le -1; } ++ then ++ func_show_eval "$cmd" 'exit $?' ++ skipped_export=false ++ elif test -n "$nm_file_list_spec"; then ++ func_basename "$output" ++ output_la=$func_basename_result ++ save_libobjs=$libobjs ++ save_output=$output ++ output=${output_objdir}/${output_la}.nm ++ func_to_tool_file "$output" ++ libobjs=$nm_file_list_spec$func_to_tool_file_result ++ func_append delfiles " $output" ++ func_verbose "creating $NM input file list: $output" ++ for obj in $save_libobjs; do ++ func_to_tool_file "$obj" ++ $ECHO "$func_to_tool_file_result" ++ done > "$output" ++ eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' ++ output=$save_output ++ libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. +@@ -7248,7 +8211,7 @@ EOF + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" +- $opt_dry_run || $ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols" ++ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then +@@ -7260,7 +8223,7 @@ EOF + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,$.*$$[ \,].*$,s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter +- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" ++ func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi +@@ -7270,7 +8233,7 @@ EOF + case " $convenience " in + *" $test_deplib "*) ;; + *) +- tmp_deplibs="$tmp_deplibs $test_deplib" ++ func_append tmp_deplibs " $test_deplib" + ;; + esac + done +@@ -7286,43 +8249,43 @@ EOF + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs +- eval "libobjs=\"\$libobjs $whole_archive_flag_spec\"" ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" ++ func_append generated " $gentop" + + func_extract_archives $gentop $convenience +- libobjs="$libobjs $func_extract_archives_result" ++ func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then +- eval "flag=\"$thread_safe_flag_spec\"" +- linker_flags="$linker_flags $flag" ++ eval flag=\"$thread_safe_flag_spec\" ++ func_append linker_flags " $flag" + fi + + # Make a backup of the uninstalled library when relinking +- if test "$mode" = relink; then +- $opt_dry_run || (cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U) || exit $? ++ if test "$opt_mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then +- eval "test_cmds=\"$module_expsym_cmds\"" ++ eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else +- eval "test_cmds=\"$module_cmds\"" ++ eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- eval "test_cmds=\"$archive_expsym_cmds\"" ++ eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else +- eval "test_cmds=\"$archive_cmds\"" ++ eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi +@@ -7366,10 +8329,13 @@ EOF + echo 'INPUT (' > $output + for obj in $save_libobjs + do +- $ECHO "$obj" >> $output ++ func_to_tool_file "$obj" ++ $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output +- delfiles="$delfiles $output" ++ func_append delfiles " $output" ++ func_to_tool_file "$output" ++ output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" +@@ -7383,15 +8349,17 @@ EOF + fi + for obj + do +- $ECHO "$obj" >> $output ++ func_to_tool_file "$obj" ++ $ECHO "$func_to_tool_file_result" >> $output + done +- delfiles="$delfiles $output" +- output=$firstobj\"$file_list_spec$output\" ++ func_append delfiles " $output" ++ func_to_tool_file "$output" ++ output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext +- eval "test_cmds=\"$reload_cmds\"" ++ eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 +@@ -7411,12 +8379,12 @@ EOF + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist +- eval "concat_cmds=\"$reload_cmds\"" ++ eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" +- eval "concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"" ++ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 +@@ -7433,11 +8401,11 @@ EOF + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" +- eval "concat_cmds=\"\${concat_cmds}$reload_cmds\"" ++ eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then +- eval "concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"" ++ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi +- delfiles="$delfiles $output" ++ func_append delfiles " $output" + + else + output= +@@ -7450,9 +8418,9 @@ EOF + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ +- eval "concat_cmds=\"\$concat_cmds$export_symbols_cmds\"" ++ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then +- eval "concat_cmds=\"\$concat_cmds~\$RM $last_robj\"" ++ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + +@@ -7471,7 +8439,7 @@ EOF + lt_exit=$? + + # Restore the uninstalled library and exit +- if test "$mode" = relink; then ++ if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) +@@ -7492,7 +8460,7 @@ EOF + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" +- $opt_dry_run || $ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols" ++ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then +@@ -7504,7 +8472,7 @@ EOF + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,$.*$$[ \,].*$,s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter +- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" ++ func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi +@@ -7515,7 +8483,7 @@ EOF + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then +- eval "libobjs=\"\$libobjs $whole_archive_flag_spec\"" ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the +@@ -7539,23 +8507,23 @@ EOF + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. +- eval "cmds=\"\$cmds~\$RM $delfiles\"" ++ eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" ++ func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles +- libobjs="$libobjs $func_extract_archives_result" ++ func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" +- eval "cmd=\"$cmd\"" ++ eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" +@@ -7564,7 +8532,7 @@ EOF + lt_exit=$? + + # Restore the uninstalled library and exit +- if test "$mode" = relink; then ++ if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) +@@ -7576,8 +8544,8 @@ EOF + IFS="$save_ifs" + + # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- $opt_dry_run || (cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname) || exit $? ++ if test "$opt_mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then +@@ -7656,17 +8624,20 @@ EOF + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then +- eval "tmp_whole_archive_flags=\"$whole_archive_flag_spec\"" ++ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" +- generated="$generated $gentop" ++ func_append generated " $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + ++ # If we're not building shared, we need to use non_pic_objs ++ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" ++ + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + +@@ -7690,7 +8661,7 @@ EOF + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" +- # $opt_dry_run || echo timestamp > $libobj || exit $? ++ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + +@@ -7740,8 +8711,8 @@ EOF + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) +- compile_command="$compile_command ${wl}-bind_at_load" +- finalize_command="$finalize_command ${wl}-bind_at_load" ++ func_append compile_command " ${wl}-bind_at_load" ++ func_append finalize_command " ${wl}-bind_at_load" + ;; + esac + fi +@@ -7761,7 +8732,7 @@ EOF + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) +- new_libs="$new_libs -L$path/$objdir" ;; ++ func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac +@@ -7771,17 +8742,17 @@ EOF + -L*) + case " $new_libs " in + *" $deplib "*) ;; +- *) new_libs="$new_libs $deplib" ;; ++ *) func_append new_libs " $deplib" ;; + esac + ;; +- *) new_libs="$new_libs $deplib" ;; ++ *) func_append new_libs " $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + +- compile_command="$compile_command $compile_deplibs" +- finalize_command="$finalize_command $finalize_deplibs" ++ func_append compile_command " $compile_deplibs" ++ func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. +@@ -7789,7 +8760,7 @@ EOF + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ;; ++ *) func_append finalize_rpath " $libdir" ;; + esac + done + fi +@@ -7808,18 +8779,18 @@ EOF + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else +- eval "flag=\"$hardcode_libdir_flag_spec\"" +- rpath="$rpath $flag" ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; ++ *) func_append perm_rpath " $libdir" ;; + esac + fi + case $host in +@@ -7828,12 +8799,12 @@ EOF + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; +- *) dllsearchpath="$dllsearchpath:$libdir";; ++ *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; +- *) dllsearchpath="$dllsearchpath:$testbindir";; ++ *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac +@@ -7842,7 +8813,7 @@ EOF + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" +- eval "rpath=\" $hardcode_libdir_flag_spec\"" ++ eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + +@@ -7859,18 +8830,18 @@ EOF + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else +- eval "flag=\"$hardcode_libdir_flag_spec\"" +- rpath="$rpath $flag" ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; +- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; ++ *) func_append finalize_perm_rpath " $libdir" ;; + esac + fi + done +@@ -7878,7 +8849,7 @@ EOF + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" +- eval "rpath=\" $hardcode_libdir_flag_spec\"" ++ eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + +@@ -7921,6 +8892,12 @@ EOF + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + ++ if test -n "$postlink_cmds"; then ++ func_to_tool_file "$output" ++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` ++ func_execute_cmds "$postlink_cmds" 'exit $?' ++ fi ++ + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' +@@ -7943,7 +8920,7 @@ EOF + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do +- rpath="$rpath$dir:" ++ func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi +@@ -7951,7 +8928,7 @@ EOF + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do +- rpath="$rpath$dir:" ++ func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi +@@ -7966,6 +8943,13 @@ EOF + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' ++ ++ if test -n "$postlink_cmds"; then ++ func_to_tool_file "$output" ++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` ++ func_execute_cmds "$postlink_cmds" 'exit $?' ++ fi ++ + exit $EXIT_SUCCESS + fi + +@@ -7999,6 +8983,12 @@ EOF + + func_show_eval "$link_command" 'exit $?' + ++ if test -n "$postlink_cmds"; then ++ func_to_tool_file "$output_objdir/$outputname" ++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` ++ func_execute_cmds "$postlink_cmds" 'exit $?' ++ fi ++ + # Now create the wrapper script. + func_verbose "creating $output" + +@@ -8096,7 +9086,7 @@ EOF + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then +- oldobjs="$oldobjs $symfileobj" ++ func_append oldobjs " $symfileobj" + fi + fi + addlibs="$old_convenience" +@@ -8104,10 +9094,10 @@ EOF + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" ++ func_append generated " $gentop" + + func_extract_archives $gentop $addlibs +- oldobjs="$oldobjs $func_extract_archives_result" ++ func_append oldobjs " $func_extract_archives_result" + fi + + # Do each command in the archive commands. +@@ -8118,10 +9108,10 @@ EOF + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" ++ func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles +- oldobjs="$oldobjs $func_extract_archives_result" ++ func_append oldobjs " $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have +@@ -8139,7 +9129,7 @@ EOF + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" ++ func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= +@@ -8163,18 +9153,28 @@ EOF + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" +- oldobjs="$oldobjs $gentop/$newobj" ++ func_append oldobjs " $gentop/$newobj" + ;; +- *) oldobjs="$oldobjs $obj" ;; ++ *) func_append oldobjs " $obj" ;; + esac + done + fi +- eval "cmds=\"$old_archive_cmds\"" ++ eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds ++ elif test -n "$archiver_list_spec"; then ++ func_verbose "using command file archive linking..." ++ for obj in $oldobjs ++ do ++ func_to_tool_file "$obj" ++ $ECHO "$func_to_tool_file_result" ++ done > $output_objdir/$libname.libcmd ++ func_to_tool_file "$output_objdir/$libname.libcmd" ++ oldobjs=" $archiver_list_spec$func_to_tool_file_result" ++ cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." +@@ -8189,7 +9189,7 @@ EOF + do + last_oldobj=$obj + done +- eval "test_cmds=\"$old_archive_cmds\"" ++ eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 +@@ -8208,7 +9208,7 @@ EOF + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ +- eval "concat_cmds=\"\${concat_cmds}$old_archive_cmds\"" ++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi +@@ -8216,9 +9216,9 @@ EOF + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then +- eval "cmds=\"\$concat_cmds\"" ++ eval cmds=\"\$concat_cmds\" + else +- eval "cmds=\"\$concat_cmds~\$old_archive_cmds\"" ++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi +@@ -8268,12 +9268,23 @@ EOF + *.la) + func_basename "$deplib" + name="$func_basename_result" +- libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` ++ func_resolve_sysroot "$deplib" ++ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" +- newdependency_libs="$newdependency_libs $libdir/$name" ++ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ++ ;; ++ -L*) ++ func_stripname -L '' "$deplib" ++ func_replace_sysroot "$func_stripname_result" ++ func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; +- *) newdependency_libs="$newdependency_libs $deplib" ;; ++ -R*) ++ func_stripname -R '' "$deplib" ++ func_replace_sysroot "$func_stripname_result" ++ func_append newdependency_libs " -R$func_replace_sysroot_result" ++ ;; ++ *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" +@@ -8284,12 +9295,14 @@ EOF + *.la) + func_basename "$lib" + name="$func_basename_result" +- libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` ++ func_resolve_sysroot "$lib" ++ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $func_resolve_sysroot_result` ++ + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" +- newdlfiles="$newdlfiles $libdir/$name" ++ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; +- *) newdlfiles="$newdlfiles $lib" ;; ++ *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles="$newdlfiles" +@@ -8303,10 +9316,11 @@ EOF + # the library: + func_basename "$lib" + name="$func_basename_result" +- libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` ++ func_resolve_sysroot "$lib" ++ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" +- newdlprefiles="$newdlprefiles $libdir/$name" ++ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done +@@ -8318,7 +9332,7 @@ EOF + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac +- newdlfiles="$newdlfiles $abs" ++ func_append newdlfiles " $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= +@@ -8327,7 +9341,7 @@ EOF + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac +- newdlprefiles="$newdlprefiles $abs" ++ func_append newdlprefiles " $abs" + done + dlprefiles="$newdlprefiles" + fi +@@ -8412,7 +9426,7 @@ relink_command=\"$relink_command\"" + exit $EXIT_SUCCESS + } + +-{ test "$mode" = link || test "$mode" = relink; } && ++{ test "$opt_mode" = link || test "$opt_mode" = relink; } && + func_mode_link ${1+"$@"} + + +@@ -8432,9 +9446,9 @@ func_mode_uninstall () + for arg + do + case $arg in +- -f) RM="$RM $arg"; rmforce=yes ;; +- -*) RM="$RM $arg" ;; +- *) files="$files $arg" ;; ++ -f) func_append RM " $arg"; rmforce=yes ;; ++ -*) func_append RM " $arg" ;; ++ *) func_append files " $arg" ;; + esac + done + +@@ -8443,24 +9457,23 @@ func_mode_uninstall () + + rmdirs= + +- origobjdir="$objdir" + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then +- objdir="$origobjdir" ++ odir="$objdir" + else +- objdir="$dir/$origobjdir" ++ odir="$dir/$objdir" + fi + func_basename "$file" + name="$func_basename_result" +- test "$mode" = uninstall && objdir="$dir" ++ test "$opt_mode" = uninstall && odir="$dir" + +- # Remember objdir for removal later, being careful to avoid duplicates +- if test "$mode" = clean; then ++ # Remember odir for removal later, being careful to avoid duplicates ++ if test "$opt_mode" = clean; then + case " $rmdirs " in +- *" $objdir "*) ;; +- *) rmdirs="$rmdirs $objdir" ;; ++ *" $odir "*) ;; ++ *) func_append rmdirs " $odir" ;; + esac + fi + +@@ -8486,18 +9499,17 @@ func_mode_uninstall () + + # Delete the libtool libraries and symlinks. + for n in $library_names; do +- rmfiles="$rmfiles $objdir/$n" ++ func_append rmfiles " $odir/$n" + done +- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" ++ test -n "$old_library" && func_append rmfiles " $odir/$old_library" + +- case "$mode" in ++ case "$opt_mode" in + clean) +- case " $library_names " in +- # " " in the beginning catches empty $dlname ++ case " $library_names " in + *" $dlname "*) ;; +- *) rmfiles="$rmfiles $objdir/$dlname" ;; ++ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac +- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ++ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then +@@ -8525,19 +9537,19 @@ func_mode_uninstall () + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then +- rmfiles="$rmfiles $dir/$pic_object" ++ func_append rmfiles " $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then +- rmfiles="$rmfiles $dir/$non_pic_object" ++ func_append rmfiles " $dir/$non_pic_object" + fi + fi + ;; + + *) +- if test "$mode" = clean ; then ++ if test "$opt_mode" = clean ; then + noexename=$name + case $file in + *.exe) +@@ -8547,7 +9559,7 @@ func_mode_uninstall () + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe +- rmfiles="$rmfiles $file" ++ func_append rmfiles " $file" + ;; + esac + # Do a test to see if this is a libtool program. +@@ -8556,7 +9568,7 @@ func_mode_uninstall () + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result +- rmfiles="$rmfiles $func_ltwrapper_scriptname_result" ++ func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename +@@ -8564,12 +9576,12 @@ func_mode_uninstall () + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles +- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" ++ func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then +- rmfiles="$rmfiles $objdir/lt-$name" ++ func_append rmfiles " $odir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then +- rmfiles="$rmfiles $objdir/lt-${noexename}.c" ++ func_append rmfiles " $odir/lt-${noexename}.c" + fi + fi + fi +@@ -8577,7 +9589,6 @@ func_mode_uninstall () + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done +- objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do +@@ -8589,16 +9600,16 @@ func_mode_uninstall () + exit $exit_status + } + +-{ test "$mode" = uninstall || test "$mode" = clean; } && ++{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +-test -z "$mode" && { ++test -z "$opt_mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" + } + + test -z "$exec_cmd" && \ +- func_fatal_help "invalid operation mode \`$mode'" ++ func_fatal_help "invalid operation mode \`$opt_mode'" + + if test -n "$exec_cmd"; then + eval exec "$exec_cmd" +diff --git a/ltoptions.m4 b/ltoptions.m4 +index 5ef12ce..17cfd51 100644 +--- a/ltoptions.m4 ++++ b/ltoptions.m4 +@@ -8,7 +8,7 @@ + # unlimited permission to copy and/or distribute it, with or without + # modifications, as long as this notice is preserved. + +-# serial 6 ltoptions.m4 ++# serial 7 ltoptions.m4 + + # This is to help aclocal find these macros, as it can't see m4_define. + AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) +diff --git a/ltversion.m4 b/ltversion.m4 +index bf87f77..9c7b5d4 100644 +--- a/ltversion.m4 ++++ b/ltversion.m4 +@@ -7,17 +7,17 @@ + # unlimited permission to copy and/or distribute it, with or without + # modifications, as long as this notice is preserved. + +-# Generated from ltversion.in. ++# @configure_input@ + +-# serial 3134 ltversion.m4 ++# serial 3293 ltversion.m4 + # This file is part of GNU Libtool + +-m4_define([LT_PACKAGE_VERSION], [2.2.7a]) +-m4_define([LT_PACKAGE_REVISION], [1.3134]) ++m4_define([LT_PACKAGE_VERSION], [2.4]) ++m4_define([LT_PACKAGE_REVISION], [1.3293]) + + AC_DEFUN([LTVERSION_VERSION], +-[macro_version='2.2.7a' +-macro_revision='1.3134' ++[macro_version='2.4' ++macro_revision='1.3293' + _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) + _LT_DECL(, macro_revision, 0) + ]) +diff --git a/lt~obsolete.m4 b/lt~obsolete.m4 +index bf92b5e..c573da9 100644 +--- a/lt~obsolete.m4 ++++ b/lt~obsolete.m4 +@@ -7,7 +7,7 @@ + # unlimited permission to copy and/or distribute it, with or without + # modifications, as long as this notice is preserved. + +-# serial 4 lt~obsolete.m4 ++# serial 5 lt~obsolete.m4 + + # These exist entirely to fool aclocal when bootstrapping libtool. + # +diff --git a/opcodes/configure b/opcodes/configure +index f615634..a340983 100755 +--- a/opcodes/configure ++++ b/opcodes/configure +@@ -649,6 +649,9 @@ OTOOL + LIPO + NMEDIT + DSYMUTIL ++MANIFEST_TOOL ++ac_ct_AR ++DLLTOOL + OBJDUMP + LN_S + NM +@@ -762,6 +765,7 @@ enable_static + with_pic + enable_fast_install + with_gnu_ld ++with_libtool_sysroot + enable_libtool_lock + enable_targets + enable_werror +@@ -1422,6 +1426,8 @@ Optional Packages: + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] ++ --with-libtool-sysroot=DIR Search for dependent libraries within DIR ++ (or the compiler's sysroot if not specified). + + Some influential environment variables: + CC C compiler command +@@ -5114,8 +5120,8 @@ esac + + + +-macro_version='2.2.7a' +-macro_revision='1.3134' ++macro_version='2.4' ++macro_revision='1.3293' + + + +@@ -5155,7 +5161,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 + $as_echo_n "checking how to print strings... " >&6; } + # Test print first, because it will be a builtin if present. +-if test "X`print -r -- -n 2>/dev/null`" = X-n && \ ++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' + elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then +@@ -5841,8 +5847,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; + # Try some XSI features + xsi_shell=no + ( _lt_dummy="a/b/c" +- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ +- = c,a/b,, \ ++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +@@ -5891,6 +5897,80 @@ esac + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 ++$as_echo_n "checking how to convert $build file names to $host format... " >&6; } ++if test "${lt_cv_to_host_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ++ ;; ++ esac ++ ;; ++ *-*-cygwin* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ++ ;; ++ esac ++ ;; ++ * ) # unhandled hosts (and "normal" native builds) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++esac ++ ++fi ++ ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 ++$as_echo "$lt_cv_to_host_file_cmd" >&6; } ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 ++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } ++if test "${lt_cv_to_tool_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ #assume ordinary cross tools, or native build. ++lt_cv_to_tool_file_cmd=func_convert_file_noop ++case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ esac ++ ;; ++esac ++ ++fi ++ ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 ++$as_echo "$lt_cv_to_tool_file_cmd" >&6; } ++ ++ ++ ++ ++ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 + $as_echo_n "checking for $LD option to reload object files... " >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then : +@@ -5907,6 +5987,11 @@ case $reload_flag in + esac + reload_cmds='$LD$reload_flag -o $output$reload_objs' + case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ if test "$GCC" != yes; then ++ reload_cmds=false ++ fi ++ ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' +@@ -6075,7 +6160,8 @@ mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ # Keep this pattern in sync with the one in func_win32_libid. ++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; +@@ -6229,6 +6315,21 @@ esac + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 + $as_echo "$lt_cv_deplibs_check_method" >&6; } ++ ++file_magic_glob= ++want_nocaseglob=no ++if test "$build" = "$host"; then ++ case $host_os in ++ mingw* | pw32*) ++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then ++ want_nocaseglob=yes ++ else ++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/$..$/s\/[\1]\/[\1]\/g;/g"` ++ fi ++ ;; ++ esac ++fi ++ + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -6244,9 +6345,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ + if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ar; ac_word=$2 ++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$DLLTOOL"; then ++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++DLLTOOL=$ac_cv_prog_DLLTOOL ++if test -n "$DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 ++$as_echo "$DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DLLTOOL"; then ++ ac_ct_DLLTOOL=$DLLTOOL ++ # Extract the first word of "dlltool", so it can be a program name with args. ++set dummy dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_DLLTOOL"; then ++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DLLTOOL="dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL ++if test -n "$ac_ct_DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 ++$as_echo "$ac_ct_DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_DLLTOOL" = x; then ++ DLLTOOL="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ DLLTOOL=$ac_ct_DLLTOOL ++ fi ++else ++ DLLTOOL="$ac_cv_prog_DLLTOOL" ++fi ++ ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 ++$as_echo_n "checking how to associate runtime and link libraries... " >&6; } ++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_sharedlib_from_linklib_cmd='unknown' ++ ++case $host_os in ++cygwin* | mingw* | pw32* | cegcc*) ++ # two different shell functions defined in ltmain.sh ++ # decide which to use based on capabilities of $DLLTOOL ++ case `$DLLTOOL --help 2>&1` in ++ *--identify-strict*) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ++ ;; ++ *) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ++ ;; ++ esac ++ ;; ++*) ++ # fallback: assume linklib IS sharedlib ++ lt_cv_sharedlib_from_linklib_cmd="$ECHO" ++ ;; ++esac ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 ++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } ++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd ++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ for ac_prog in ar ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_AR+set}" = set; then : +@@ -6262,7 +6516,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_AR="${ac_tool_prefix}ar" ++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6282,11 +6536,15 @@ $as_echo "no" >&6; } + fi + + ++ test -n "$AR" && break ++ done + fi +-if test -z "$ac_cv_prog_AR"; then ++if test -z "$AR"; then + ac_ct_AR=$AR +- # Extract the first word of "ar", so it can be a program name with args. +-set dummy ar; ac_word=$2 ++ for ac_prog in ar ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : +@@ -6302,7 +6560,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_AR="ar" ++ ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6321,6 +6579,10 @@ else + $as_echo "no" >&6; } + fi + ++ ++ test -n "$ac_ct_AR" && break ++done ++ + if test "x$ac_ct_AR" = x; then + AR="false" + else +@@ -6332,16 +6594,72 @@ ac_tool_warned=yes ;; + esac + AR=$ac_ct_AR + fi +-else +- AR="$ac_cv_prog_AR" + fi + +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru ++: ${AR=ar} ++: ${AR_FLAGS=cru} ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 ++$as_echo_n "checking for archiver @FILE support... " >&6; } ++if test "${lt_cv_ar_at_file+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_ar_at_file=no ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ + ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ echo conftest.$ac_objext > conftest.lst ++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -eq 0; then ++ # Ensure the archiver fails upon bogus file names. ++ rm -f conftest.$ac_objext libconftest.a ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -ne 0; then ++ lt_cv_ar_at_file=@ ++ fi ++ fi ++ rm -f conftest.* libconftest.a + ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 ++$as_echo "$lt_cv_ar_at_file" >&6; } + ++if test "x$lt_cv_ar_at_file" = xno; then ++ archiver_list_spec= ++else ++ archiver_list_spec=$lt_cv_ar_at_file ++fi + + + +@@ -6683,8 +7001,8 @@ esac + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" + + # Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" +-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" + + # Handle CRLF in mingw tool chain + opt_cr= +@@ -6720,6 +7038,7 @@ for ac_symprfx in "" "_"; do + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi ++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -6761,6 +7080,18 @@ _LT_EOF + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext ++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ ++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) ++/* DATA imports from DLLs on WIN32 con't be const, because runtime ++ relocations are performed -- see ld's documentation on pseudo-relocs. */ ++# define LT_DLSYM_CONST ++#elif defined(__osf__) ++/* This system does not cope well with relocations in const data. */ ++# define LT_DLSYM_CONST ++#else ++# define LT_DLSYM_CONST const ++#endif ++ + #ifdef __cplusplus + extern "C" { + #endif +@@ -6772,7 +7103,7 @@ _LT_EOF + cat <<_LT_EOF >> conftest.$ac_ext + + /* The mapping between symbol names and symbols. */ +-const struct { ++LT_DLSYM_CONST struct { + const char *name; + void *address; + } +@@ -6798,8 +7129,8 @@ static const void *lt_preloaded_setup() { + _LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" ++ lt_globsym_save_LIBS=$LIBS ++ lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 +@@ -6809,8 +7140,8 @@ _LT_EOF + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" ++ LIBS=$lt_globsym_save_LIBS ++ CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi +@@ -6847,6 +7178,16 @@ else + $as_echo "ok" >&6; } + fi + ++# Response file support. ++if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ nm_file_list_spec='@' ++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then ++ nm_file_list_spec='@' ++fi ++ ++ ++ ++ + + + +@@ -6868,6 +7209,45 @@ fi + + + ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 ++$as_echo_n "checking for sysroot... " >&6; } ++ ++# Check whether --with-libtool-sysroot was given. ++if test "${with_libtool_sysroot+set}" = set; then : ++ withval=$with_libtool_sysroot; ++else ++ with_libtool_sysroot=no ++fi ++ ++ ++lt_sysroot= ++case ${with_libtool_sysroot} in #( ++ yes) ++ if test "$GCC" = yes; then ++ lt_sysroot=`$CC --print-sysroot 2>/dev/null` ++ fi ++ ;; #( ++ /*) ++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"` ++ ;; #( ++ no|'') ++ ;; #( ++ *) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5 ++$as_echo "${with_libtool_sysroot}" >&6; } ++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5 ++ ;; ++esac ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 ++$as_echo "${lt_sysroot:-no}" >&6; } ++ ++ ++ ++ ++ + # Check whether --enable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +@@ -7074,6 +7454,123 @@ esac + + need_locks="$enable_libtool_lock" + ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. ++set dummy ${ac_tool_prefix}mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$MANIFEST_TOOL"; then ++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL ++if test -n "$MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 ++$as_echo "$MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL ++ # Extract the first word of "mt", so it can be a program name with args. ++set dummy mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_MANIFEST_TOOL"; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL ++if test -n "$ac_ct_MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 ++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_MANIFEST_TOOL" = x; then ++ MANIFEST_TOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL ++ fi ++else ++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" ++fi ++ ++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 ++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } ++if test "${lt_cv_path_mainfest_tool+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_path_mainfest_tool=no ++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 ++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out ++ cat conftest.err >&5 ++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then ++ lt_cv_path_mainfest_tool=yes ++ fi ++ rm -f conftest* ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 ++$as_echo "$lt_cv_path_mainfest_tool" >&6; } ++if test "x$lt_cv_path_mainfest_tool" != xyes; then ++ MANIFEST_TOOL=: ++fi ++ ++ ++ ++ ++ + + case $host_os in + rhapsody* | darwin*) +@@ -7637,6 +8134,8 @@ _LT_EOF + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 ++ echo "$RANLIB libconftest.a" >&5 ++ $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF + int main() { return 0;} + _LT_EOF +@@ -7802,7 +8301,8 @@ fi + LIBTOOL_DEPS="$ltmain" + + # Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++LIBTOOL='$(SHELL) $(top_builddir)' ++LIBTOOL="$LIBTOOL/${host_alias}-libtool" + + + +@@ -7891,7 +8391,7 @@ aix3*) + esac + + # Global variables: +-ofile=libtool ++ofile=${host_alias}-libtool + can_build_shared=yes + + # All known linkers require a `.a' archive for static linking (except MSVC, +@@ -8189,8 +8689,6 @@ fi + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -8356,6 +8854,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; ++ nagfor*) ++ # NAG Fortran compiler ++ lt_prog_compiler_wl='-Wl,-Wl,,' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) +@@ -8418,7 +8922,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in +- f77* | f90* | f95*) ++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; +@@ -8475,13 +8979,17 @@ case $host_os in + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; + esac +-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 +-$as_echo "$lt_prog_compiler_pic" >&6; } +- +- +- +- + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 ++$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++if test "${lt_cv_prog_compiler_pic+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 ++$as_echo "$lt_cv_prog_compiler_pic" >&6; } ++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + + # + # Check to make sure the PIC flag actually works. +@@ -8542,6 +9050,11 @@ fi + + + ++ ++ ++ ++ ++ + # + # Check to make sure the static flag actually works. + # +@@ -8892,7 +9405,8 @@ _LT_EOF + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' ++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +@@ -8991,12 +9505,12 @@ _LT_EOF + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' +- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ +- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac +@@ -9010,8 +9524,8 @@ _LT_EOF + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + +@@ -9029,8 +9543,8 @@ _LT_EOF + + _LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -9076,8 +9590,8 @@ _LT_EOF + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -9207,7 +9721,13 @@ _LT_EOF + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9220,22 +9740,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +@@ -9247,7 +9774,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + else + # Determine the default libpath from the value encoded in an + # empty executable. +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9260,22 +9793,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, +@@ -9320,20 +9860,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_from_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes=yes ++ case $cc_basename in ++ cl*) ++ # Native MSVC ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ file_list_spec='@' ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ sed -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; ++ else ++ sed -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; ++ fi~ ++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ ++ linknames=' ++ # The linker will not automatically build a static lib if we build a DLL. ++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true' ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ # Don't use ranlib ++ old_postinstall_cmds='chmod 644 $oldlib' ++ postlink_cmds='lt_outputfile="@OUTPUT@"~ ++ lt_tool_outputfile="@TOOL_OUTPUT@"~ ++ case $lt_outputfile in ++ *.exe|*.EXE) ;; ++ *) ++ lt_outputfile="$lt_outputfile.exe" ++ lt_tool_outputfile="$lt_tool_outputfile.exe" ++ ;; ++ esac~ ++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then ++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; ++ $RM "$lt_outputfile.manifest"; ++ fi' ++ ;; ++ *) ++ # Assume MSVC wrapper ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ esac + ;; + + darwin* | rhapsody*) +@@ -9394,7 +9977,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no +@@ -9402,7 +9985,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux9*) + if test "$GCC" = yes; then +- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi +@@ -9418,7 +10001,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi +@@ -9442,10 +10025,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +@@ -9524,23 +10107,36 @@ fi + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" +- cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++ # This should be the same for all languages, so no per-tag cache variable. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 ++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } ++if test "${lt_cv_irix_exported_symbol+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-int foo(void) {} ++int foo (void) { return 0; } + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' +- ++ lt_cv_irix_exported_symbol=yes ++else ++ lt_cv_irix_exported_symbol=no + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +- LDFLAGS="$save_LDFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 ++$as_echo "$lt_cv_irix_exported_symbol" >&6; } ++ if test "$lt_cv_irix_exported_symbol" = yes; then ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' +@@ -9625,7 +10221,7 @@ rm -f core conftest.err conftest.$ac_objext \ + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' +@@ -9644,9 +10240,9 @@ rm -f core conftest.err conftest.$ac_objext \ + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' +- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) +@@ -10222,8 +10818,9 @@ cygwin* | mingw* | pw32* | cegcc*) + need_version=no + need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ case $GCC,$cc_basename in ++ yes,*) ++ # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +@@ -10256,13 +10853,71 @@ cygwin* | mingw* | pw32* | cegcc*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac ++ dynamic_linker='Win32 ld.exe' ++ ;; ++ ++ *,cl*) ++ # Native MSVC ++ libname_spec='$name' ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='${libname}.dll.lib' ++ ++ case $build_os in ++ mingw*) ++ sys_lib_search_path_spec= ++ lt_save_ifs=$IFS ++ IFS=';' ++ for lt_path in $LIB ++ do ++ IFS=$lt_save_ifs ++ # Let DOS variable expansion print the short 8.3 style file name. ++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` ++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" ++ done ++ IFS=$lt_save_ifs ++ # Convert to MSYS style. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \$[a-zA-Z]\$:| /\\1|g' -e 's|^ ||'` ++ ;; ++ cygwin*) ++ # Convert to unix form, then to dos form, then back to unix form ++ # but this time dos style (no spaces!) so that the unix form looks ++ # like /cygdrive/c/PROGRA~1:/cygdr... ++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` ++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` ++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ ;; ++ *) ++ sys_lib_search_path_spec="$LIB" ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # FIXME: find the short name or the path components, as spaces are ++ # common. (e.g. "Program Files" -> "PROGRA~1") ++ ;; ++ esac ++ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ dynamic_linker='Win32 link.exe' + ;; + + *) ++ # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ dynamic_linker='Win32 ld.exe' + ;; + esac +- dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +@@ -10354,7 +11009,7 @@ haiku*) + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes +- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib' ++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +@@ -11194,10 +11849,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -11300,10 +11955,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -12499,7 +13154,7 @@ if test "$enable_shared" = "yes"; then + # since libbfd may not pull in the entirety of libiberty. + x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'` + if test -n "$x"; then +- SHARED_LIBADD="-L`pwd`/../libiberty/pic -liberty" ++ SHARED_LIBADD="`pwd`/../libiberty/pic/libiberty.a" + fi + + case "${host}" in +@@ -13473,13 +14128,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' + lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' + lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' + lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' + reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' + reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' + OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' + deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' + file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' ++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' ++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' ++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' ++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' + AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' + AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' ++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' + STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' + RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' + old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +@@ -13494,14 +14156,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de + lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' ++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' ++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' + objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' + MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' + lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' + need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' ++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' + DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' + NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' + LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +@@ -13534,12 +14199,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q + hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' + inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' + link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`' + always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' + export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' + exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' + include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' + prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' ++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' + file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' + variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' + need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +@@ -13594,8 +14259,13 @@ reload_flag \ + OBJDUMP \ + deplibs_check_method \ + file_magic_cmd \ ++file_magic_glob \ ++want_nocaseglob \ ++DLLTOOL \ ++sharedlib_from_linklib_cmd \ + AR \ + AR_FLAGS \ ++archiver_list_spec \ + STRIP \ + RANLIB \ + CC \ +@@ -13605,12 +14275,14 @@ lt_cv_sys_global_symbol_pipe \ + lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++nm_file_list_spec \ + lt_prog_compiler_no_builtin_flag \ +-lt_prog_compiler_wl \ + lt_prog_compiler_pic \ ++lt_prog_compiler_wl \ + lt_prog_compiler_static \ + lt_cv_prog_compiler_c_o \ + need_locks \ ++MANIFEST_TOOL \ + DSYMUTIL \ + NMEDIT \ + LIPO \ +@@ -13626,7 +14298,6 @@ no_undefined_flag \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ +-fix_srcfile_path \ + exclude_expsyms \ + include_expsyms \ + file_list_spec \ +@@ -13662,6 +14333,7 @@ module_cmds \ + module_expsym_cmds \ + export_symbols_cmds \ + prelink_cmds \ ++postlink_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + finish_cmds \ +@@ -14418,7 +15090,8 @@ $as_echo X"$file" | + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, ++# Inc. + # Written by Gordon Matzigkeit, 1996 + # + # This file is part of GNU Libtool. +@@ -14521,19 +15194,42 @@ SP2NL=$lt_lt_SP2NL + # turn newlines into spaces. + NL2SP=$lt_lt_NL2SP + ++# convert \$build file names to \$host format. ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++ ++# convert \$build files to toolchain format. ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++ + # An object symbol dumper. + OBJDUMP=$lt_OBJDUMP + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + +-# Command to use when deplibs_check_method == "file_magic". ++# Command to use when deplibs_check_method = "file_magic". + file_magic_cmd=$lt_file_magic_cmd + ++# How to find potential files when deplibs_check_method = "file_magic". ++file_magic_glob=$lt_file_magic_glob ++ ++# Find potential files using nocaseglob when deplibs_check_method = "file_magic". ++want_nocaseglob=$lt_want_nocaseglob ++ ++# DLL creation program. ++DLLTOOL=$lt_DLLTOOL ++ ++# Command to associate shared and link libraries. ++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd ++ + # The archiver. + AR=$lt_AR ++ ++# Flags to create an archive. + AR_FLAGS=$lt_AR_FLAGS + ++# How to feed a file listing to the archiver. ++archiver_list_spec=$lt_archiver_list_spec ++ + # A symbol stripping program. + STRIP=$lt_STRIP + +@@ -14563,6 +15259,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + # Transform the output of nm in a C name address pair when lib prefix is needed. + global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + ++# Specify filename containing input files for \$NM. ++nm_file_list_spec=$lt_nm_file_list_spec ++ ++# The root where to search for dependent libraries,and in which our libraries should be installed. ++lt_sysroot=$lt_sysroot ++ + # The name of the directory that contains temporary libtool files. + objdir=$objdir + +@@ -14572,6 +15274,9 @@ MAGIC_CMD=$MAGIC_CMD + # Must we lock files when doing compilation? + need_locks=$lt_need_locks + ++# Manifest tool. ++MANIFEST_TOOL=$lt_MANIFEST_TOOL ++ + # Tool to manipulate archived DWARF debug symbol files on Mac OS X. + DSYMUTIL=$lt_DSYMUTIL + +@@ -14686,12 +15391,12 @@ with_gcc=$GCC + # Compiler flag to turn off builtin functions. + no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl +- + # Additional compiler flags for building library objects. + pic_flag=$lt_lt_prog_compiler_pic + ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ + # Compiler flag to prevent dynamic linking. + link_static_flag=$lt_lt_prog_compiler_static + +@@ -14778,9 +15483,6 @@ inherit_rpath=$inherit_rpath + # Whether libtool must link a program against all its dependency libraries. + link_all_deplibs=$link_all_deplibs + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- + # Set to "yes" if exported symbols are required. + always_export_symbols=$always_export_symbols + +@@ -14796,6 +15498,9 @@ include_expsyms=$lt_include_expsyms + # Commands necessary for linking programs (against libraries) with templates. + prelink_cmds=$lt_prelink_cmds + ++# Commands necessary for finishing linking programs. ++postlink_cmds=$lt_postlink_cmds ++ + # Specify filename containing input files. + file_list_spec=$lt_file_list_spec + +@@ -14828,210 +15533,169 @@ ltmain="$ac_aux_dir/ltmain.sh" + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? +- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- case $xsi_shell in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result="${1##*/}" +-} +- +-# func_dirname_and_basename file append nondir_replacement +-# perform func_basename and func_dirname in a single function +-# call: +-# dirname: Compute the dirname of FILE. If nonempty, +-# add APPEND to the result, otherwise set result +-# to NONDIR_REPLACEMENT. +-# value returned in "$func_dirname_result" +-# basename: Compute filename of FILE. +-# value retuned in "$func_basename_result" +-# Implementation must be kept synchronized with func_dirname +-# and func_basename. For efficiency, we do not delegate to +-# those functions but instead duplicate the functionality here. +-func_dirname_and_basename () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +- func_basename_result="${1##*/}" +-} +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-func_stripname () +-{ +- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are +- # positional parameters, so assign one to ordinary parameter first. +- func_stripname_result=${3} +- func_stripname_result=${func_stripname_result#"${1}"} +- func_stripname_result=${func_stripname_result%"${2}"} +-} +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=${1%%=*} +- func_opt_split_arg=${1#*=} +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- case ${1} in +- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; +- *) func_lo2o_result=${1} ;; +- esac +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=${1%.*}.lo +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=$(( $* )) +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=${#1} +-} +- +-_LT_EOF +- ;; +- *) # Bourne compatible functions. +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- # Extract subdirectory from the argument. +- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` +- if test "X$func_dirname_result" = "X${1}"; then +- func_dirname_result="${3}" +- else +- func_dirname_result="$func_dirname_result${2}" +- fi +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result=`$ECHO "${1}" | $SED "$basename"` +-} +- +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-# func_strip_suffix prefix name +-func_stripname () +-{ +- case ${2} in +- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; +- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; +- esac +-} +- +-# sed scripts: +-my_sed_long_opt='1s/^$-[^=]*$=.*/\1/;q' +-my_sed_long_arg='1s/^-[^=]*=//' +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` +- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=`expr "$@"` +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +-} +- +-_LT_EOF +-esac +- +-case $lt_shell_append in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1+=\$2" +-} +-_LT_EOF +- ;; +- *) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1=\$$1\$2" +-} +- +-_LT_EOF +- ;; +- esac +- +- +- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || ++ sed '$q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ if test x"$xsi_shell" = xyes; then ++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ ++func_dirname ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_basename ()$/,/^} # func_basename /c\ ++func_basename ()\ ++{\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ ++func_dirname_and_basename ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ ++func_stripname ()\ ++{\ ++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ ++\ # positional parameters, so assign one to ordinary parameter first.\ ++\ func_stripname_result=${3}\ ++\ func_stripname_result=${func_stripname_result#"${1}"}\ ++\ func_stripname_result=${func_stripname_result%"${2}"}\ ++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ ++func_split_long_opt ()\ ++{\ ++\ func_split_long_opt_name=${1%%=*}\ ++\ func_split_long_opt_arg=${1#*=}\ ++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ ++func_split_short_opt ()\ ++{\ ++\ func_split_short_opt_arg=${1#??}\ ++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ ++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ ++func_lo2o ()\ ++{\ ++\ case ${1} in\ ++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ ++\ *) func_lo2o_result=${1} ;;\ ++\ esac\ ++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_xform ()$/,/^} # func_xform /c\ ++func_xform ()\ ++{\ ++ func_xform_result=${1%.*}.lo\ ++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_arith ()$/,/^} # func_arith /c\ ++func_arith ()\ ++{\ ++ func_arith_result=$(( $* ))\ ++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_len ()$/,/^} # func_len /c\ ++func_len ()\ ++{\ ++ func_len_result=${#1}\ ++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++fi ++ ++if test x"$lt_shell_append" = xyes; then ++ sed -e '/^func_append ()$/,/^} # func_append /c\ ++func_append ()\ ++{\ ++ eval "${1}+=\\${2}"\ ++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ ++func_append_quoted ()\ ++{\ ++\ func_quote_for_eval "${2}"\ ++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ ++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ # Save a `func_append' function call where possible by direct use of '+=' ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1+="%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++else ++ # Save a `func_append' function call even when '+=' is not available ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++fi ++ ++if test x"$_lt_function_replace_fail" = x":"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 ++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} ++fi ++ ++ ++ mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +diff --git a/opcodes/configure.ac b/opcodes/configure.ac +index c7f4783..f2e002d 100644 +--- a/opcodes/configure.ac ++++ b/opcodes/configure.ac +@@ -167,7 +167,7 @@ changequote(,)dnl + x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'` + changequote([,])dnl + if test -n "$x"; then +- SHARED_LIBADD="-L`pwd`/../libiberty/pic -liberty" ++ SHARED_LIBADD="`pwd`/../libiberty/pic/libiberty.a" + fi + + case "${host}" in +diff --git a/zlib/configure b/zlib/configure +index bba9fd2..25a2dae 100755 +--- a/zlib/configure ++++ b/zlib/configure +@@ -614,8 +614,11 @@ OTOOL + LIPO + NMEDIT + DSYMUTIL ++MANIFEST_TOOL + RANLIB ++ac_ct_AR + AR ++DLLTOOL + OBJDUMP + LN_S + NM +@@ -737,6 +740,7 @@ enable_static + with_pic + enable_fast_install + with_gnu_ld ++with_libtool_sysroot + enable_libtool_lock + enable_host_shared + ' +@@ -1385,6 +1389,8 @@ Optional Packages: + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] ++ --with-libtool-sysroot=DIR Search for dependent libraries within DIR ++ (or the compiler's sysroot if not specified). + + Some influential environment variables: + CC C compiler command +@@ -3910,8 +3916,8 @@ esac + + + +-macro_version='2.2.7a' +-macro_revision='1.3134' ++macro_version='2.4' ++macro_revision='1.3293' + + + +@@ -3951,7 +3957,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 + $as_echo_n "checking how to print strings... " >&6; } + # Test print first, because it will be a builtin if present. +-if test "X`print -r -- -n 2>/dev/null`" = X-n && \ ++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' + elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then +@@ -4767,8 +4773,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; + # Try some XSI features + xsi_shell=no + ( _lt_dummy="a/b/c" +- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ +- = c,a/b,, \ ++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +@@ -4817,6 +4823,80 @@ esac + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 ++$as_echo_n "checking how to convert $build file names to $host format... " >&6; } ++if test "${lt_cv_to_host_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ++ ;; ++ esac ++ ;; ++ *-*-cygwin* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ++ ;; ++ *-*-cygwin* ) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++ * ) # otherwise, assume *nix ++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ++ ;; ++ esac ++ ;; ++ * ) # unhandled hosts (and "normal" native builds) ++ lt_cv_to_host_file_cmd=func_convert_file_noop ++ ;; ++esac ++ ++fi ++ ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 ++$as_echo "$lt_cv_to_host_file_cmd" >&6; } ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 ++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } ++if test "${lt_cv_to_tool_file_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ #assume ordinary cross tools, or native build. ++lt_cv_to_tool_file_cmd=func_convert_file_noop ++case $host in ++ *-*-mingw* ) ++ case $build in ++ *-*-mingw* ) # actually msys ++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ++ ;; ++ esac ++ ;; ++esac ++ ++fi ++ ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 ++$as_echo "$lt_cv_to_tool_file_cmd" >&6; } ++ ++ ++ ++ ++ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 + $as_echo_n "checking for $LD option to reload object files... " >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then : +@@ -4833,6 +4913,11 @@ case $reload_flag in + esac + reload_cmds='$LD$reload_flag -o $output$reload_objs' + case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ if test "$GCC" != yes; then ++ reload_cmds=false ++ fi ++ ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' +@@ -5001,7 +5086,8 @@ mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ # Keep this pattern in sync with the one in func_win32_libid. ++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; +@@ -5155,6 +5241,21 @@ esac + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 + $as_echo "$lt_cv_deplibs_check_method" >&6; } ++ ++file_magic_glob= ++want_nocaseglob=no ++if test "$build" = "$host"; then ++ case $host_os in ++ mingw* | pw32*) ++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then ++ want_nocaseglob=yes ++ else ++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/$..$/s\/[\1]\/[\1]\/g;/g"` ++ fi ++ ;; ++ esac ++fi ++ + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -5170,9 +5271,163 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ + if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ar; ac_word=$2 ++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$DLLTOOL"; then ++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++DLLTOOL=$ac_cv_prog_DLLTOOL ++if test -n "$DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 ++$as_echo "$DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DLLTOOL"; then ++ ac_ct_DLLTOOL=$DLLTOOL ++ # Extract the first word of "dlltool", so it can be a program name with args. ++set dummy dlltool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_DLLTOOL"; then ++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DLLTOOL="dlltool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL ++if test -n "$ac_ct_DLLTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 ++$as_echo "$ac_ct_DLLTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_DLLTOOL" = x; then ++ DLLTOOL="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ DLLTOOL=$ac_ct_DLLTOOL ++ fi ++else ++ DLLTOOL="$ac_cv_prog_DLLTOOL" ++fi ++ ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 ++$as_echo_n "checking how to associate runtime and link libraries... " >&6; } ++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_sharedlib_from_linklib_cmd='unknown' ++ ++case $host_os in ++cygwin* | mingw* | pw32* | cegcc*) ++ # two different shell functions defined in ltmain.sh ++ # decide which to use based on capabilities of $DLLTOOL ++ case `$DLLTOOL --help 2>&1` in ++ *--identify-strict*) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ++ ;; ++ *) ++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ++ ;; ++ esac ++ ;; ++*) ++ # fallback: assume linklib IS sharedlib ++ lt_cv_sharedlib_from_linklib_cmd="$ECHO" ++ ;; ++esac ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 ++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } ++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd ++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ for ac_prog in ar ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_AR+set}" = set; then : +@@ -5188,7 +5443,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_AR="${ac_tool_prefix}ar" ++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -5208,11 +5463,15 @@ $as_echo "no" >&6; } + fi + + ++ test -n "$AR" && break ++ done + fi +-if test -z "$ac_cv_prog_AR"; then ++if test -z "$AR"; then + ac_ct_AR=$AR +- # Extract the first word of "ar", so it can be a program name with args. +-set dummy ar; ac_word=$2 ++ for ac_prog in ar ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : +@@ -5228,7 +5487,7 @@ do + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_AR="ar" ++ ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -5247,6 +5506,10 @@ else + $as_echo "no" >&6; } + fi + ++ ++ test -n "$ac_ct_AR" && break ++done ++ + if test "x$ac_ct_AR" = x; then + AR="false" + else +@@ -5258,16 +5521,72 @@ ac_tool_warned=yes ;; + esac + AR=$ac_ct_AR + fi +-else +- AR="$ac_cv_prog_AR" + fi + +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru ++: ${AR=ar} ++: ${AR_FLAGS=cru} ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 ++$as_echo_n "checking for archiver @FILE support... " >&6; } ++if test "${lt_cv_ar_at_file+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_ar_at_file=no ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ + ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ echo conftest.$ac_objext > conftest.lst ++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -eq 0; then ++ # Ensure the archiver fails upon bogus file names. ++ rm -f conftest.$ac_objext libconftest.a ++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 ++ (eval $lt_ar_try) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if test "$ac_status" -ne 0; then ++ lt_cv_ar_at_file=@ ++ fi ++ fi ++ rm -f conftest.* libconftest.a + ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 ++$as_echo "$lt_cv_ar_at_file" >&6; } + ++if test "x$lt_cv_ar_at_file" = xno; then ++ archiver_list_spec= ++else ++ archiver_list_spec=$lt_cv_ar_at_file ++fi + + + +@@ -5609,8 +5928,8 @@ esac + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" + + # Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" +-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" + + # Handle CRLF in mingw tool chain + opt_cr= +@@ -5646,6 +5965,7 @@ for ac_symprfx in "" "_"; do + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi ++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -5687,6 +6007,18 @@ _LT_EOF + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext ++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ ++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) ++/* DATA imports from DLLs on WIN32 con't be const, because runtime ++ relocations are performed -- see ld's documentation on pseudo-relocs. */ ++# define LT_DLSYM_CONST ++#elif defined(__osf__) ++/* This system does not cope well with relocations in const data. */ ++# define LT_DLSYM_CONST ++#else ++# define LT_DLSYM_CONST const ++#endif ++ + #ifdef __cplusplus + extern "C" { + #endif +@@ -5698,7 +6030,7 @@ _LT_EOF + cat <<_LT_EOF >> conftest.$ac_ext + + /* The mapping between symbol names and symbols. */ +-const struct { ++LT_DLSYM_CONST struct { + const char *name; + void *address; + } +@@ -5724,8 +6056,8 @@ static const void *lt_preloaded_setup() { + _LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" ++ lt_globsym_save_LIBS=$LIBS ++ lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 +@@ -5735,8 +6067,8 @@ _LT_EOF + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" ++ LIBS=$lt_globsym_save_LIBS ++ CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi +@@ -5773,6 +6105,19 @@ else + $as_echo "ok" >&6; } + fi + ++# Response file support. ++if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ nm_file_list_spec='@' ++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then ++ nm_file_list_spec='@' ++fi ++ ++ ++ ++ ++ ++ ++ + + + +@@ -5793,6 +6138,41 @@ fi + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 ++$as_echo_n "checking for sysroot... " >&6; } ++ ++# Check whether --with-libtool-sysroot was given. ++if test "${with_libtool_sysroot+set}" = set; then : ++ withval=$with_libtool_sysroot; ++else ++ with_libtool_sysroot=no ++fi ++ ++ ++lt_sysroot= ++case ${with_libtool_sysroot} in #( ++ yes) ++ if test "$GCC" = yes; then ++ lt_sysroot=`$CC --print-sysroot 2>/dev/null` ++ fi ++ ;; #( ++ /*) ++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"` ++ ;; #( ++ no|'') ++ ;; #( ++ *) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5 ++$as_echo "${with_libtool_sysroot}" >&6; } ++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5 ++ ;; ++esac ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 ++$as_echo "${lt_sysroot:-no}" >&6; } ++ ++ ++ + + + # Check whether --enable-libtool-lock was given. +@@ -6004,6 +6384,123 @@ esac + + need_locks="$enable_libtool_lock" + ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. ++set dummy ${ac_tool_prefix}mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$MANIFEST_TOOL"; then ++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL ++if test -n "$MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 ++$as_echo "$MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL ++ # Extract the first word of "mt", so it can be a program name with args. ++set dummy mt; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_MANIFEST_TOOL"; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL ++if test -n "$ac_ct_MANIFEST_TOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 ++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_MANIFEST_TOOL" = x; then ++ MANIFEST_TOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL ++ fi ++else ++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" ++fi ++ ++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 ++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } ++if test "${lt_cv_path_mainfest_tool+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_path_mainfest_tool=no ++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 ++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out ++ cat conftest.err >&5 ++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then ++ lt_cv_path_mainfest_tool=yes ++ fi ++ rm -f conftest* ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 ++$as_echo "$lt_cv_path_mainfest_tool" >&6; } ++if test "x$lt_cv_path_mainfest_tool" != xyes; then ++ MANIFEST_TOOL=: ++fi ++ ++ ++ ++ ++ + + case $host_os in + rhapsody* | darwin*) +@@ -6570,6 +7067,8 @@ _LT_EOF + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 ++ echo "$RANLIB libconftest.a" >&5 ++ $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF + int main() { return 0;} + _LT_EOF +@@ -7033,7 +7532,8 @@ fi + LIBTOOL_DEPS="$ltmain" + + # Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++LIBTOOL='$(SHELL) $(top_builddir)' ++LIBTOOL="$LIBTOOL/${host_alias}-libtool" + + + +@@ -7122,7 +7622,7 @@ aix3*) + esac + + # Global variables: +-ofile=libtool ++ofile=${host_alias}-libtool + can_build_shared=yes + + # All known linkers require a `.a' archive for static linking (except MSVC, +@@ -7420,8 +7920,6 @@ fi + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -7587,6 +8085,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; ++ nagfor*) ++ # NAG Fortran compiler ++ lt_prog_compiler_wl='-Wl,-Wl,,' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) +@@ -7649,7 +8153,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in +- f77* | f90* | f95*) ++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; +@@ -7706,13 +8210,17 @@ case $host_os in + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; + esac +-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 +-$as_echo "$lt_prog_compiler_pic" >&6; } +- +- +- +- + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 ++$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++if test "${lt_cv_prog_compiler_pic+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 ++$as_echo "$lt_cv_prog_compiler_pic" >&6; } ++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + + # + # Check to make sure the PIC flag actually works. +@@ -7773,6 +8281,11 @@ fi + + + ++ ++ ++ ++ ++ + # + # Check to make sure the static flag actually works. + # +@@ -8123,7 +8636,8 @@ _LT_EOF + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' ++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +@@ -8222,12 +8736,12 @@ _LT_EOF + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' +- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ +- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac +@@ -8241,8 +8755,8 @@ _LT_EOF + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + +@@ -8260,8 +8774,8 @@ _LT_EOF + + _LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -8307,8 +8821,8 @@ _LT_EOF + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi +@@ -8438,7 +8952,13 @@ _LT_EOF + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. +- if test x$gcc_no_link = xyes; then ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test x$gcc_no_link = xyes; then + as_fn_error "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5 + fi + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +@@ -8454,22 +8974,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +@@ -8481,7 +9008,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + else + # Determine the default libpath from the value encoded in an + # empty executable. +- if test x$gcc_no_link = xyes; then ++ if test "${lt_cv_aix_libpath+set}" = set; then ++ aix_libpath=$lt_cv_aix_libpath ++else ++ if test "${lt_cv_aix_libpath_+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test x$gcc_no_link = xyes; then + as_fn_error "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5 + fi + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +@@ -8497,22 +9030,29 @@ main () + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *$.*$$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi ++ lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$[^ ]*$ *$/\1/ ++ p ++ } ++ }' ++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ # Check for a 64-bit object if we didn't find anything. ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ fi + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ if test -z "$lt_cv_aix_libpath_"; then ++ lt_cv_aix_libpath_="/usr/lib:/lib" ++ fi ++ ++fi ++ ++ aix_libpath=$lt_cv_aix_libpath_ ++fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, +@@ -8557,20 +9097,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_from_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes=yes ++ case $cc_basename in ++ cl*) ++ # Native MSVC ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ file_list_spec='@' ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ sed -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; ++ else ++ sed -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; ++ fi~ ++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ ++ linknames=' ++ # The linker will not automatically build a static lib if we build a DLL. ++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true' ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ # Don't use ranlib ++ old_postinstall_cmds='chmod 644 $oldlib' ++ postlink_cmds='lt_outputfile="@OUTPUT@"~ ++ lt_tool_outputfile="@TOOL_OUTPUT@"~ ++ case $lt_outputfile in ++ *.exe|*.EXE) ;; ++ *) ++ lt_outputfile="$lt_outputfile.exe" ++ lt_tool_outputfile="$lt_tool_outputfile.exe" ++ ;; ++ esac~ ++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then ++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; ++ $RM "$lt_outputfile.manifest"; ++ fi' ++ ;; ++ *) ++ # Assume MSVC wrapper ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ esac + ;; + + darwin* | rhapsody*) +@@ -8631,7 +9214,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no +@@ -8639,7 +9222,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux9*) + if test "$GCC" = yes; then +- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi +@@ -8655,7 +9238,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi +@@ -8679,10 +9262,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +@@ -8761,26 +9344,39 @@ fi + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" +- if test x$gcc_no_link = xyes; then ++ # This should be the same for all languages, so no per-tag cache variable. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 ++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } ++if test "${lt_cv_irix_exported_symbol+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ if test x$gcc_no_link = xyes; then + as_fn_error "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5 + fi + cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-int foo(void) {} ++int foo (void) { return 0; } + _ACEOF + if ac_fn_c_try_link "$LINENO"; then : +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' +- ++ lt_cv_irix_exported_symbol=yes ++else ++ lt_cv_irix_exported_symbol=no + fi + rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +- LDFLAGS="$save_LDFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 ++$as_echo "$lt_cv_irix_exported_symbol" >&6; } ++ if test "$lt_cv_irix_exported_symbol" = yes; then ++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' +@@ -8865,7 +9461,7 @@ rm -f core conftest.err conftest.$ac_objext \ + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' +@@ -8884,9 +9480,9 @@ rm -f core conftest.err conftest.$ac_objext \ + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' +- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) +@@ -9462,8 +10058,9 @@ cygwin* | mingw* | pw32* | cegcc*) + need_version=no + need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ case $GCC,$cc_basename in ++ yes,*) ++ # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +@@ -9496,13 +10093,71 @@ cygwin* | mingw* | pw32* | cegcc*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac ++ dynamic_linker='Win32 ld.exe' ++ ;; ++ ++ *,cl*) ++ # Native MSVC ++ libname_spec='$name' ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='${libname}.dll.lib' ++ ++ case $build_os in ++ mingw*) ++ sys_lib_search_path_spec= ++ lt_save_ifs=$IFS ++ IFS=';' ++ for lt_path in $LIB ++ do ++ IFS=$lt_save_ifs ++ # Let DOS variable expansion print the short 8.3 style file name. ++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` ++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" ++ done ++ IFS=$lt_save_ifs ++ # Convert to MSYS style. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \$[a-zA-Z]\$:| /\\1|g' -e 's|^ ||'` ++ ;; ++ cygwin*) ++ # Convert to unix form, then to dos form, then back to unix form ++ # but this time dos style (no spaces!) so that the unix form looks ++ # like /cygdrive/c/PROGRA~1:/cygdr... ++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` ++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` ++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ ;; ++ *) ++ sys_lib_search_path_spec="$LIB" ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # FIXME: find the short name or the path components, as spaces are ++ # common. (e.g. "Program Files" -> "PROGRA~1") ++ ;; ++ esac ++ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ dynamic_linker='Win32 link.exe' + ;; + + *) ++ # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ dynamic_linker='Win32 ld.exe' + ;; + esac +- dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +@@ -9594,7 +10249,7 @@ haiku*) + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes +- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib' ++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +@@ -10408,7 +11063,7 @@ else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +-#line 10411 "configure" ++#line $LINENO "configure" + #include "confdefs.h" + + #if HAVE_DLFCN_H +@@ -10452,10 +11107,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -10514,7 +11169,7 @@ else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +-#line 10517 "configure" ++#line $LINENO "configure" + #include "confdefs.h" + + #if HAVE_DLFCN_H +@@ -10558,10 +11213,10 @@ else + /* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ + #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +-void fnord () __attribute__((visibility("default"))); ++int fnord () __attribute__((visibility("default"))); + #endif + +-void fnord () { int i=42; } ++int fnord () { return 42; } + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +@@ -11993,13 +12648,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' + lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' + lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' + lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' ++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' + reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' + reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' + OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' + deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' + file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' ++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' ++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' ++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' ++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' + AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' + AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' ++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' + STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' + RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' + old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +@@ -12014,14 +12676,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de + lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' ++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' ++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' + objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' + MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' + lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' + lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' + need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' ++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' + DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' + NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' + LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +@@ -12054,12 +12719,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q + hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' + inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' + link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`' + always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' + export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' + exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' + include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' + prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' ++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' + file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' + variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' + need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +@@ -12114,8 +12779,13 @@ reload_flag \ + OBJDUMP \ + deplibs_check_method \ + file_magic_cmd \ ++file_magic_glob \ ++want_nocaseglob \ ++DLLTOOL \ ++sharedlib_from_linklib_cmd \ + AR \ + AR_FLAGS \ ++archiver_list_spec \ + STRIP \ + RANLIB \ + CC \ +@@ -12125,12 +12795,14 @@ lt_cv_sys_global_symbol_pipe \ + lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++nm_file_list_spec \ + lt_prog_compiler_no_builtin_flag \ +-lt_prog_compiler_wl \ + lt_prog_compiler_pic \ ++lt_prog_compiler_wl \ + lt_prog_compiler_static \ + lt_cv_prog_compiler_c_o \ + need_locks \ ++MANIFEST_TOOL \ + DSYMUTIL \ + NMEDIT \ + LIPO \ +@@ -12146,7 +12818,6 @@ no_undefined_flag \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ +-fix_srcfile_path \ + exclude_expsyms \ + include_expsyms \ + file_list_spec \ +@@ -12182,6 +12853,7 @@ module_cmds \ + module_expsym_cmds \ + export_symbols_cmds \ + prelink_cmds \ ++postlink_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + finish_cmds \ +@@ -12771,7 +13443,8 @@ $as_echo X"$file" | + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, ++# Inc. + # Written by Gordon Matzigkeit, 1996 + # + # This file is part of GNU Libtool. +@@ -12874,19 +13547,42 @@ SP2NL=$lt_lt_SP2NL + # turn newlines into spaces. + NL2SP=$lt_lt_NL2SP + ++# convert \$build file names to \$host format. ++to_host_file_cmd=$lt_cv_to_host_file_cmd ++ ++# convert \$build files to toolchain format. ++to_tool_file_cmd=$lt_cv_to_tool_file_cmd ++ + # An object symbol dumper. + OBJDUMP=$lt_OBJDUMP + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + +-# Command to use when deplibs_check_method == "file_magic". ++# Command to use when deplibs_check_method = "file_magic". + file_magic_cmd=$lt_file_magic_cmd + ++# How to find potential files when deplibs_check_method = "file_magic". ++file_magic_glob=$lt_file_magic_glob ++ ++# Find potential files using nocaseglob when deplibs_check_method = "file_magic". ++want_nocaseglob=$lt_want_nocaseglob ++ ++# DLL creation program. ++DLLTOOL=$lt_DLLTOOL ++ ++# Command to associate shared and link libraries. ++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd ++ + # The archiver. + AR=$lt_AR ++ ++# Flags to create an archive. + AR_FLAGS=$lt_AR_FLAGS + ++# How to feed a file listing to the archiver. ++archiver_list_spec=$lt_archiver_list_spec ++ + # A symbol stripping program. + STRIP=$lt_STRIP + +@@ -12916,6 +13612,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + # Transform the output of nm in a C name address pair when lib prefix is needed. + global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + ++# Specify filename containing input files for \$NM. ++nm_file_list_spec=$lt_nm_file_list_spec ++ ++# The root where to search for dependent libraries,and in which our libraries should be installed. ++lt_sysroot=$lt_sysroot ++ + # The name of the directory that contains temporary libtool files. + objdir=$objdir + +@@ -12925,6 +13627,9 @@ MAGIC_CMD=$MAGIC_CMD + # Must we lock files when doing compilation? + need_locks=$lt_need_locks + ++# Manifest tool. ++MANIFEST_TOOL=$lt_MANIFEST_TOOL ++ + # Tool to manipulate archived DWARF debug symbol files on Mac OS X. + DSYMUTIL=$lt_DSYMUTIL + +@@ -13039,12 +13744,12 @@ with_gcc=$GCC + # Compiler flag to turn off builtin functions. + no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl +- + # Additional compiler flags for building library objects. + pic_flag=$lt_lt_prog_compiler_pic + ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ + # Compiler flag to prevent dynamic linking. + link_static_flag=$lt_lt_prog_compiler_static + +@@ -13131,9 +13836,6 @@ inherit_rpath=$inherit_rpath + # Whether libtool must link a program against all its dependency libraries. + link_all_deplibs=$link_all_deplibs + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- + # Set to "yes" if exported symbols are required. + always_export_symbols=$always_export_symbols + +@@ -13149,6 +13851,9 @@ include_expsyms=$lt_include_expsyms + # Commands necessary for linking programs (against libraries) with templates. + prelink_cmds=$lt_prelink_cmds + ++# Commands necessary for finishing linking programs. ++postlink_cmds=$lt_postlink_cmds ++ + # Specify filename containing input files. + file_list_spec=$lt_file_list_spec + +@@ -13181,210 +13886,169 @@ ltmain="$ac_aux_dir/ltmain.sh" + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? +- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- case $xsi_shell in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result="${1##*/}" +-} +- +-# func_dirname_and_basename file append nondir_replacement +-# perform func_basename and func_dirname in a single function +-# call: +-# dirname: Compute the dirname of FILE. If nonempty, +-# add APPEND to the result, otherwise set result +-# to NONDIR_REPLACEMENT. +-# value returned in "$func_dirname_result" +-# basename: Compute filename of FILE. +-# value retuned in "$func_basename_result" +-# Implementation must be kept synchronized with func_dirname +-# and func_basename. For efficiency, we do not delegate to +-# those functions but instead duplicate the functionality here. +-func_dirname_and_basename () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +- func_basename_result="${1##*/}" +-} +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-func_stripname () +-{ +- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are +- # positional parameters, so assign one to ordinary parameter first. +- func_stripname_result=${3} +- func_stripname_result=${func_stripname_result#"${1}"} +- func_stripname_result=${func_stripname_result%"${2}"} +-} +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=${1%%=*} +- func_opt_split_arg=${1#*=} +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- case ${1} in +- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; +- *) func_lo2o_result=${1} ;; +- esac +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=${1%.*}.lo +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=$(( $* )) +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=${#1} +-} +- +-_LT_EOF +- ;; +- *) # Bourne compatible functions. +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- # Extract subdirectory from the argument. +- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` +- if test "X$func_dirname_result" = "X${1}"; then +- func_dirname_result="${3}" +- else +- func_dirname_result="$func_dirname_result${2}" +- fi +-} +- +-# func_basename file +-func_basename () +-{ +- func_basename_result=`$ECHO "${1}" | $SED "$basename"` +-} +- +- +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-# func_strip_suffix prefix name +-func_stripname () +-{ +- case ${2} in +- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; +- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; +- esac +-} +- +-# sed scripts: +-my_sed_long_opt='1s/^$-[^=]*$=.*/\1/;q' +-my_sed_long_arg='1s/^-[^=]*=//' +- +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` +- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +-} +- +-# func_lo2o object +-func_lo2o () +-{ +- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +-} +- +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +-} +- +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=`expr "$@"` +-} +- +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +-} +- +-_LT_EOF +-esac +- +-case $lt_shell_append in +- yes) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1+=\$2" +-} +-_LT_EOF +- ;; +- *) +- cat << \_LT_EOF >> "$cfgfile" +- +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$1=\$$1\$2" +-} +- +-_LT_EOF +- ;; +- esac +- +- +- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || ++ sed '$q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ if test x"$xsi_shell" = xyes; then ++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ ++func_dirname ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_basename ()$/,/^} # func_basename /c\ ++func_basename ()\ ++{\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ ++func_dirname_and_basename ()\ ++{\ ++\ case ${1} in\ ++\ */*) func_dirname_result="${1%/*}${2}" ;;\ ++\ * ) func_dirname_result="${3}" ;;\ ++\ esac\ ++\ func_basename_result="${1##*/}"\ ++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ ++func_stripname ()\ ++{\ ++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ ++\ # positional parameters, so assign one to ordinary parameter first.\ ++\ func_stripname_result=${3}\ ++\ func_stripname_result=${func_stripname_result#"${1}"}\ ++\ func_stripname_result=${func_stripname_result%"${2}"}\ ++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ ++func_split_long_opt ()\ ++{\ ++\ func_split_long_opt_name=${1%%=*}\ ++\ func_split_long_opt_arg=${1#*=}\ ++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ ++func_split_short_opt ()\ ++{\ ++\ func_split_short_opt_arg=${1#??}\ ++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ ++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ ++func_lo2o ()\ ++{\ ++\ case ${1} in\ ++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ ++\ *) func_lo2o_result=${1} ;;\ ++\ esac\ ++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_xform ()$/,/^} # func_xform /c\ ++func_xform ()\ ++{\ ++ func_xform_result=${1%.*}.lo\ ++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_arith ()$/,/^} # func_arith /c\ ++func_arith ()\ ++{\ ++ func_arith_result=$(( $* ))\ ++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_len ()$/,/^} # func_len /c\ ++func_len ()\ ++{\ ++ func_len_result=${#1}\ ++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++fi ++ ++if test x"$lt_shell_append" = xyes; then ++ sed -e '/^func_append ()$/,/^} # func_append /c\ ++func_append ()\ ++{\ ++ eval "${1}+=\\${2}"\ ++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ ++func_append_quoted ()\ ++{\ ++\ func_quote_for_eval "${2}"\ ++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ ++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++test 0 -eq $? || _lt_function_replace_fail=: ++ ++ ++ # Save a `func_append' function call where possible by direct use of '+=' ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1+="%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++else ++ # Save a `func_append' function call even when '+=' is not available ++ sed -e 's%func_append $[a-zA-Z_]\{1,\}$ "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ ++ && mv -f "$cfgfile.tmp" "$cfgfile" \ ++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") ++ test 0 -eq $? || _lt_function_replace_fail=: ++fi ++ ++if test x"$_lt_function_replace_fail" = x":"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 ++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} ++fi ++ ++ ++ mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +-- +2.9.0 diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0007-Add-the-armv5e-architecture-to-binutils.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0007-Add-the-armv5e-architecture-to-binutils.patch new file mode 100644 index 0000000..795abf3 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0007-Add-the-armv5e-architecture-to-binutils.patch @@ -0,0 +1,35 @@ +From 9475aee8a702aa531737ec12dfd928d52951bc84 Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Mon, 2 Mar 2015 01:37:10 +0000 +Subject: [PATCH 07/13] Add the armv5e architecture to binutils + +Binutils has a comment that indicates it is supposed to match gcc for +all of the support "-march=" settings, but it was lacking the armv5e setting. +This was a simple way to add it, as thumb instructions shouldn't be generated +by the compiler anyway. + +Upstream-Status: Denied +Upstream maintainer indicated that we should not be using armv5e, even +though it is a legal archicture defined by our gcc. + +Signed-off-by: Mark Hatle <mark.hatle(a)windriver.com> +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + gas/config/tc-arm.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/gas/config/tc-arm.c b/gas/config/tc-arm.c +index 73d0531..4b9e32f 100644 +--- a/gas/config/tc-arm.c ++++ b/gas/config/tc-arm.c +@@ -25421,6 +25421,7 @@ static const struct arm_arch_option_table arm_archs[] = + ARM_ARCH_OPT ("armv4t", ARM_ARCH_V4T, FPU_ARCH_FPA), + ARM_ARCH_OPT ("armv4txm", ARM_ARCH_V4TxM, FPU_ARCH_FPA), + ARM_ARCH_OPT ("armv5", ARM_ARCH_V5, FPU_ARCH_VFP), ++ ARM_ARCH_OPT ("armv5e", ARM_ARCH_V5TE, FPU_ARCH_VFP), + ARM_ARCH_OPT ("armv5t", ARM_ARCH_V5T, FPU_ARCH_VFP), + ARM_ARCH_OPT ("armv5txm", ARM_ARCH_V5TxM, FPU_ARCH_VFP), + ARM_ARCH_OPT ("armv5te", ARM_ARCH_V5TE, FPU_ARCH_VFP), +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0008-don-t-let-the-distro-compiler-point-to-the-wrong-ins.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0008-don-t-let-the-distro-compiler-point-to-the-wrong-ins.patch new file mode 100644 index 0000000..af524ce --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0008-don-t-let-the-distro-compiler-point-to-the-wrong-ins.patch @@ -0,0 +1,35 @@ +From b2d277937d11f1ce1d581f48ff74a25822a052da Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Mon, 2 Mar 2015 01:39:01 +0000 +Subject: [PATCH 08/13] don't let the distro compiler point to the wrong + installation location + +Thanks to RP for helping find the source code causing the issue. + +2010/08/13 +Nitin A Kamble <nitin.a.kamble(a)intel.com> + +Upstream-Status: Inappropriate [embedded specific] + +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + libiberty/Makefile.in | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/libiberty/Makefile.in b/libiberty/Makefile.in +index c7a4568..f766b72 100644 +--- a/libiberty/Makefile.in ++++ b/libiberty/Makefile.in +@@ -364,7 +364,8 @@ install-strip: install + # multilib-specific flags, it's overridden by FLAGS_TO_PASS from the + # default multilib, so we have to take CFLAGS into account as well, + # since it will be passed the multilib flags. +-MULTIOSDIR = `$(CC) $(CFLAGS) -print-multi-os-directory` ++#MULTIOSDIR = `$(CC) $(CFLAGS) -print-multi-os-directory` ++MULTIOSDIR = "" + install_to_libdir: all + if test -n "${target_header_dir}"; then \ + ${mkinstalldirs} $(DESTDIR)$(libdir)/$(MULTIOSDIR); \ +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0009-warn-for-uses-of-system-directories-when-cross-linki.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0009-warn-for-uses-of-system-directories-when-cross-linki.patch new file mode 100644 index 0000000..3c83e69 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0009-warn-for-uses-of-system-directories-when-cross-linki.patch @@ -0,0 +1,273 @@ +From 7ab8e318659eb5d9adc758c78d084a95560b93fd Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Fri, 15 Jan 2016 06:31:09 +0000 +Subject: [PATCH 09/13] warn for uses of system directories when cross linking + +2008-07-02 Joseph Myers <joseph(a)codesourcery.com> + + ld/ + * ld.h (args_type): Add error_poison_system_directories. + * ld.texinfo (--error-poison-system-directories): Document. + * ldfile.c (ldfile_add_library_path): Check + command_line.error_poison_system_directories. + * ldmain.c (main): Initialize + command_line.error_poison_system_directories. + * lexsup.c (enum option_values): Add + OPTION_ERROR_POISON_SYSTEM_DIRECTORIES. + (ld_options): Add --error-poison-system-directories. + (parse_args): Handle new option. + +2007-06-13 Joseph Myers <joseph(a)codesourcery.com> + + ld/ + * config.in: Regenerate. + * ld.h (args_type): Add poison_system_directories. + * ld.texinfo (--no-poison-system-directories): Document. + * ldfile.c (ldfile_add_library_path): Check + command_line.poison_system_directories. + * ldmain.c (main): Initialize + command_line.poison_system_directories. + * lexsup.c (enum option_values): Add + OPTION_NO_POISON_SYSTEM_DIRECTORIES. + (ld_options): Add --no-poison-system-directories. + (parse_args): Handle new option. + +2007-04-20 Joseph Myers <joseph(a)codesourcery.com> + + Merge from Sourcery G++ binutils 2.17: + + 2007-03-20 Joseph Myers <joseph(a)codesourcery.com> + Based on patch by Mark Hatle <mark.hatle(a)windriver.com>. + ld/ + * configure.in (--enable-poison-system-directories): New option. + * configure, config.in: Regenerate. + * ldfile.c (ldfile_add_library_path): If + ENABLE_POISON_SYSTEM_DIRECTORIES defined, warn for use of /lib, + /usr/lib, /usr/local/lib or /usr/X11R6/lib. + +Signed-off-by: Mark Hatle <mark.hatle(a)windriver.com> +Signed-off-by: Scott Garman <scott.a.garman(a)intel.com> +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- +Upstream-Status: Pending + + ld/config.in | 3 +++ + ld/configure | 16 ++++++++++++++++ + ld/configure.ac | 10 ++++++++++ + ld/ld.h | 8 ++++++++ + ld/ld.texinfo | 12 ++++++++++++ + ld/ldfile.c | 17 +++++++++++++++++ + ld/ldlex.h | 2 ++ + ld/ldmain.c | 2 ++ + ld/lexsup.c | 16 ++++++++++++++++ + 9 files changed, 86 insertions(+) + +diff --git a/ld/config.in b/ld/config.in +index 2c6d698..d3cb7e8 100644 +--- a/ld/config.in ++++ b/ld/config.in +@@ -17,6 +17,9 @@ + language is requested. */ + #undef ENABLE_NLS + ++/* Define to warn for use of native system library directories */ ++#undef ENABLE_POISON_SYSTEM_DIRECTORIES ++ + /* Additional extension a shared object might have. */ + #undef EXTRA_SHLIB_EXTENSION + +diff --git a/ld/configure b/ld/configure +index 3df1149..0601c98 100755 +--- a/ld/configure ++++ b/ld/configure +@@ -792,6 +792,7 @@ with_lib_path + enable_targets + enable_64_bit_bfd + with_sysroot ++enable_poison_system_directories + enable_gold + enable_got + enable_compressed_debug_sections +@@ -1449,6 +1450,8 @@ Optional Features: + --disable-largefile omit support for large files + --enable-targets alternative target configurations + --enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes) ++ --enable-poison-system-directories ++ warn for use of native system library directories + --enable-gold[=ARG] build gold [ARG={default,yes,no}] + --enable-got=<type> GOT handling scheme (target, single, negative, + multigot) +@@ -16313,6 +16316,19 @@ fi + + + ++# Check whether --enable-poison-system-directories was given. ++if test "${enable_poison_system_directories+set}" = set; then : ++ enableval=$enable_poison_system_directories; ++else ++ enable_poison_system_directories=no ++fi ++ ++if test "x${enable_poison_system_directories}" = "xyes"; then ++ ++$as_echo "#define ENABLE_POISON_SYSTEM_DIRECTORIES 1" >>confdefs.h ++ ++fi ++ + # Check whether --enable-gold was given. + if test "${enable_gold+set}" = set; then : + enableval=$enable_gold; case "${enableval}" in +diff --git a/ld/configure.ac b/ld/configure.ac +index d17281f..9fb3db9 100644 +--- a/ld/configure.ac ++++ b/ld/configure.ac +@@ -95,6 +95,16 @@ AC_SUBST(use_sysroot) + AC_SUBST(TARGET_SYSTEM_ROOT) + AC_SUBST(TARGET_SYSTEM_ROOT_DEFINE) + ++AC_ARG_ENABLE([poison-system-directories], ++ AS_HELP_STRING([--enable-poison-system-directories], ++ [warn for use of native system library directories]),, ++ [enable_poison_system_directories=no]) ++if test "x${enable_poison_system_directories}" = "xyes"; then ++ AC_DEFINE([ENABLE_POISON_SYSTEM_DIRECTORIES], ++ [1], ++ [Define to warn for use of native system library directories]) ++fi ++ + dnl Use --enable-gold to decide if this linker should be the default. + dnl "install_as_default" is set to false if gold is the default linker. + dnl "installed_linker" is the installed BFD linker name. +diff --git a/ld/ld.h b/ld/ld.h +index 85a48ad..a8fdddf 100644 +--- a/ld/ld.h ++++ b/ld/ld.h +@@ -169,6 +169,14 @@ typedef struct + /* If set, display the target memory usage (per memory region). */ + bfd_boolean print_memory_usage; + ++ /* If TRUE (the default) warn for uses of system directories when ++ cross linking. */ ++ bfd_boolean poison_system_directories; ++ ++ /* If TRUE (default FALSE) give an error for uses of system ++ directories when cross linking instead of a warning. */ ++ bfd_boolean error_poison_system_directories; ++ + /* Big or little endian as set on command line. */ + enum endian_enum endian; + +diff --git a/ld/ld.texinfo b/ld/ld.texinfo +index bc16764..838c75d 100644 +--- a/ld/ld.texinfo ++++ b/ld/ld.texinfo +@@ -2357,6 +2357,18 @@ string identifying the original linked file does not change. + + Passing @code{none} for @var{style} disables the setting from any + @code{--build-id} options earlier on the command line. ++ ++@kindex --no-poison-system-directories ++@item --no-poison-system-directories ++Do not warn for @option{-L} options using system directories such as ++@file{/usr/lib} when cross linking. This option is intended for use ++in chroot environments when such directories contain the correct ++libraries for the target system rather than the host. ++ ++@kindex --error-poison-system-directories ++@item --error-poison-system-directories ++Give an error instead of a warning for @option{-L} options using ++system directories when cross linking. + @end table + + @c man end +diff --git a/ld/ldfile.c b/ld/ldfile.c +index e397737..013727b 100644 +--- a/ld/ldfile.c ++++ b/ld/ldfile.c +@@ -114,6 +114,23 @@ ldfile_add_library_path (const char *name, bfd_boolean cmdline) + new_dirs->name = concat (ld_sysroot, name + 1, (const char *) NULL); + else + new_dirs->name = xstrdup (name); ++ ++#ifdef ENABLE_POISON_SYSTEM_DIRECTORIES ++ if (command_line.poison_system_directories ++ && ((!strncmp (name, "/lib", 4)) ++ || (!strncmp (name, "/usr/lib", 8)) ++ || (!strncmp (name, "/usr/local/lib", 14)) ++ || (!strncmp (name, "/usr/X11R6/lib", 14)))) ++ { ++ if (command_line.error_poison_system_directories) ++ einfo (_("%X%P: error: library search path \"%s\" is unsafe for " ++ "cross-compilation\n"), name); ++ else ++ einfo (_("%P: warning: library search path \"%s\" is unsafe for " ++ "cross-compilation\n"), name); ++ } ++#endif ++ + } + + /* Try to open a BFD for a lang_input_statement. */ +diff --git a/ld/ldlex.h b/ld/ldlex.h +index cf943e4..12cfcaa 100644 +--- a/ld/ldlex.h ++++ b/ld/ldlex.h +@@ -144,6 +144,8 @@ enum option_values + OPTION_PRINT_MEMORY_USAGE, + OPTION_REQUIRE_DEFINED_SYMBOL, + OPTION_ORPHAN_HANDLING, ++ OPTION_NO_POISON_SYSTEM_DIRECTORIES, ++ OPTION_ERROR_POISON_SYSTEM_DIRECTORIES, + }; + + /* The initial parser states. */ +diff --git a/ld/ldmain.c b/ld/ldmain.c +index e7a8dff..3ccf2af 100644 +--- a/ld/ldmain.c ++++ b/ld/ldmain.c +@@ -257,6 +257,8 @@ main (int argc, char **argv) + command_line.warn_mismatch = TRUE; + command_line.warn_search_mismatch = TRUE; + command_line.check_section_addresses = -1; ++ command_line.poison_system_directories = TRUE; ++ command_line.error_poison_system_directories = FALSE; + + /* We initialize DEMANGLING based on the environment variable + COLLECT_NO_DEMANGLE. The gcc collect2 program will demangle the +diff --git a/ld/lexsup.c b/ld/lexsup.c +index 6d28e91..5c9da57 100644 +--- a/ld/lexsup.c ++++ b/ld/lexsup.c +@@ -530,6 +530,14 @@ static const struct ld_option ld_options[] = + { {"orphan-handling", required_argument, NULL, OPTION_ORPHAN_HANDLING}, + '\0', N_("=MODE"), N_("Control how orphan sections are handled."), + TWO_DASHES }, ++ { {"no-poison-system-directories", no_argument, NULL, ++ OPTION_NO_POISON_SYSTEM_DIRECTORIES}, ++ '\0', NULL, N_("Do not warn for -L options using system directories"), ++ TWO_DASHES }, ++ { {"error-poison-system-directories", no_argument, NULL, ++ + OPTION_ERROR_POISON_SYSTEM_DIRECTORIES}, ++ '\0', NULL, N_("Give an error for -L options using system directories"), ++ TWO_DASHES }, + }; + + #define OPTION_COUNT ARRAY_SIZE (ld_options) +@@ -1550,6 +1558,14 @@ parse_args (unsigned argc, char **argv) + einfo (_("%P%F: invalid argument to option" + " \"--orphan-handling\"\n")); + break; ++ ++ case OPTION_NO_POISON_SYSTEM_DIRECTORIES: ++ command_line.poison_system_directories = FALSE; ++ break; ++ ++ case OPTION_ERROR_POISON_SYSTEM_DIRECTORIES: ++ command_line.error_poison_system_directories = TRUE; ++ break; + } + } + +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0010-Fix-rpath-in-libtool-when-sysroot-is-enabled.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0010-Fix-rpath-in-libtool-when-sysroot-is-enabled.patch new file mode 100644 index 0000000..e2f6a51 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0010-Fix-rpath-in-libtool-when-sysroot-is-enabled.patch @@ -0,0 +1,52 @@ +From 27fc7a4927ab92925a5be84217959d9f1c808ccc Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Mon, 2 Mar 2015 01:42:38 +0000 +Subject: [PATCH 10/13] Fix rpath in libtool when sysroot is enabled + +Enabling sysroot support in libtool exposed a bug where the final +library had an RPATH encoded into it which still pointed to the +sysroot. This works around the issue until it gets sorted out +upstream. + +Fix suggested by Richard Purdie <richard.purdie(a)linuxfoundation.org> + +Upstream-Status: Inappropriate [embedded specific] + +Signed-off-by: Scott Garman <scott.a.garman(a)intel.com> +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + ltmain.sh | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +diff --git a/ltmain.sh b/ltmain.sh +index 70e856e..11ee684 100644 +--- a/ltmain.sh ++++ b/ltmain.sh +@@ -8035,9 +8035,11 @@ EOF + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then ++ func_replace_sysroot "$libdir" ++ libdir=$func_replace_sysroot_result ++ func_stripname '=' '' "$libdir" ++ libdir=$func_stripname_result + if test -n "$hardcode_libdir_separator"; then +- func_replace_sysroot "$libdir" +- libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else +@@ -8770,6 +8772,10 @@ EOF + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then ++ func_replace_sysroot "$libdir" ++ libdir=$func_replace_sysroot_result ++ func_stripname '=' '' "$libdir" ++ libdir=$func_stripname_result + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0011-Change-default-emulation-for-mips64-linux.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0011-Change-default-emulation-for-mips64-linux.patch new file mode 100644 index 0000000..3fdb5eb --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0011-Change-default-emulation-for-mips64-linux.patch @@ -0,0 +1,59 @@ +From 6b018e8129298dbd5b714e459ef0b3aef5bbce13 Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Mon, 2 Mar 2015 01:44:14 +0000 +Subject: [PATCH 11/13] Change default emulation for mips64*-*-linux + +we change the default emulations to be N64 instead of N32 + +Upstream-Status: Inappropriate [ OE configuration Specific] + +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + bfd/config.bfd | 8 ++++---- + ld/configure.tgt | 8 ++++---- + 2 files changed, 8 insertions(+), 8 deletions(-) + +diff --git a/bfd/config.bfd b/bfd/config.bfd +index b998830..ab17e72 100644 +--- a/bfd/config.bfd ++++ b/bfd/config.bfd +@@ -1101,12 +1101,12 @@ case "${targ}" in + targ_selvecs="mips_elf32_le_vec mips_elf64_be_vec mips_elf64_le_vec mips_ecoff_be_vec mips_ecoff_le_vec" + ;; + mips64*el-*-linux*) +- targ_defvec=mips_elf32_ntrad_le_vec +- targ_selvecs="mips_elf32_ntrad_be_vec mips_elf32_trad_le_vec mips_elf32_trad_be_vec mips_elf64_trad_le_vec mips_elf64_trad_be_vec" ++ targ_defvec=mips_elf64_trad_le_vec ++ targ_selvecs="mips_elf32_ntrad_be_vec mips_elf32_ntrad_le_vec mips_elf32_trad_le_vec mips_elf32_trad_be_vec mips_elf64_trad_be_vec" + ;; + mips64*-*-linux*) +- targ_defvec=mips_elf32_ntrad_be_vec +- targ_selvecs="mips_elf32_ntrad_le_vec mips_elf32_trad_be_vec mips_elf32_trad_le_vec mips_elf64_trad_be_vec mips_elf64_trad_le_vec" ++ targ_defvec=mips_elf64_trad_be_vec ++ targ_selvecs="mips_elf32_ntrad_be_vec mips_elf32_ntrad_be_vec mips_elf32_trad_be_vec mips_elf32_trad_le_vec mips_elf64_trad_le_vec" + ;; + mips*el-*-linux*) + targ_defvec=mips_elf32_trad_le_vec +diff --git a/ld/configure.tgt b/ld/configure.tgt +index a3db909..212327c 100644 +--- a/ld/configure.tgt ++++ b/ld/configure.tgt +@@ -513,11 +513,11 @@ mips*el-*-vxworks*) targ_emul=elf32elmipvxworks + mips*-*-vxworks*) targ_emul=elf32ebmipvxworks + targ_extra_emuls="elf32elmipvxworks" ;; + mips*-*-windiss) targ_emul=elf32mipswindiss ;; +-mips64*el-*-linux-*) targ_emul=elf32ltsmipn32 +- targ_extra_emuls="elf32btsmipn32 elf32ltsmip elf32btsmip elf64ltsmip elf64btsmip" ++mips64*el-*-linux-*) targ_emul=elf64ltsmip ++ targ_extra_emuls="elf32btsmipn32 elf32ltsmipn32 elf32ltsmip elf32btsmip elf64btsmip" + targ_extra_libpath=$targ_extra_emuls ;; +-mips64*-*-linux-*) targ_emul=elf32btsmipn32 +- targ_extra_emuls="elf32ltsmipn32 elf32btsmip elf32ltsmip elf64btsmip elf64ltsmip" ++mips64*-*-linux-*) targ_emul=elf64btsmip ++ targ_extra_emuls="elf32btsmipn32 elf32ltsmipn32 elf32btsmip elf32ltsmip elf64ltsmip" + targ_extra_libpath=$targ_extra_emuls ;; + mips*el-*-linux-*) targ_emul=elf32ltsmip + targ_extra_emuls="elf32btsmip elf32ltsmipn32 elf64ltsmip elf32btsmipn32 elf64btsmip" +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0012-Add-support-for-Netlogic-XLP.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0012-Add-support-for-Netlogic-XLP.patch new file mode 100644 index 0000000..8103347 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0012-Add-support-for-Netlogic-XLP.patch @@ -0,0 +1,413 @@ +From c2e138f4ccdf8af81c18c8511c901d3deee696b5 Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Sun, 14 Feb 2016 17:06:19 +0000 +Subject: [PATCH 12/13] Add support for Netlogic XLP + +Patch From: Nebu Philips <nphilips(a)netlogicmicro.com> + +Using the mipsisa64r2nlm target, add support for XLP from +Netlogic. Also, update vendor name to NLM wherever applicable. + +Use 0x00000080 for INSN_XLP, the value 0x00000040 has already been +assigned to INSN_OCTEON3 + +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +Signed-off-by: Baoshan Pang <baoshan.pang(a)windriver.com> +Signed-off-by: Mark Hatle <mark.hatle(a)windriver.com> +--- +Upstream-Status: Pending + + bfd/aoutx.h | 1 + + bfd/archures.c | 1 + + bfd/bfd-in2.h | 1 + + bfd/config.bfd | 5 +++++ + bfd/cpu-mips.c | 6 ++++-- + bfd/elfxx-mips.c | 8 ++++++++ + binutils/readelf.c | 1 + + gas/config/tc-mips.c | 4 +++- + gas/configure | 3 +++ + gas/configure.tgt | 2 +- + include/elf/mips.h | 1 + + include/opcode/mips.h | 10 ++++++++-- + ld/configure.tgt | 2 ++ + opcodes/mips-dis.c | 12 +++++------- + opcodes/mips-opc.c | 33 +++++++++++++++++++++------------ + 15 files changed, 65 insertions(+), 25 deletions(-) + +diff --git a/bfd/aoutx.h b/bfd/aoutx.h +index be0126a..4ca7e24 100644 +--- a/bfd/aoutx.h ++++ b/bfd/aoutx.h +@@ -812,6 +812,7 @@ NAME (aout, machine_type) (enum bfd_architecture arch, + case bfd_mach_mipsisa64r6: + case bfd_mach_mips_sb1: + case bfd_mach_mips_xlr: ++ case bfd_mach_mips_xlp: + /* FIXME: These should be MIPS3, MIPS4, MIPS16, MIPS32, etc. */ + arch_flags = M_MIPS2; + break; +diff --git a/bfd/archures.c b/bfd/archures.c +index 96c9109..5a30d02 100644 +--- a/bfd/archures.c ++++ b/bfd/archures.c +@@ -197,6 +197,7 @@ DESCRIPTION + .#define bfd_mach_mips_octeon2 6502 + .#define bfd_mach_mips_octeon3 6503 + .#define bfd_mach_mips_xlr 887682 {* decimal 'XLR' *} ++.#define bfd_mach_mips_xlp 887680 {* decimal 'XLP' *} + .#define bfd_mach_mipsisa32 32 + .#define bfd_mach_mipsisa32r2 33 + .#define bfd_mach_mipsisa32r3 34 +diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h +index 30513c4..5e8ed4c 100644 +--- a/bfd/bfd-in2.h ++++ b/bfd/bfd-in2.h +@@ -2008,6 +2008,7 @@ enum bfd_architecture + #define bfd_mach_mips_octeon2 6502 + #define bfd_mach_mips_octeon3 6503 + #define bfd_mach_mips_xlr 887682 /* decimal 'XLR' */ ++#define bfd_mach_mips_xlp 887680 /* decimal 'XLP' */ + #define bfd_mach_mipsisa32 32 + #define bfd_mach_mipsisa32r2 33 + #define bfd_mach_mipsisa32r3 34 +diff --git a/bfd/config.bfd b/bfd/config.bfd +index ab17e72..863be89 100644 +--- a/bfd/config.bfd ++++ b/bfd/config.bfd +@@ -1084,6 +1084,11 @@ case "${targ}" in + targ_defvec=mips_elf32_le_vec + targ_selvecs="mips_elf32_be_vec mips_elf64_be_vec mips_elf64_le_vec" + ;; ++ mipsisa64*-*-elf*) ++ targ_defvec=mips_elf32_trad_be_vec ++ targ_selvecs="mips_elf32_trad_le_vec mips_elf64_trad_be_vec mips_elf64_trad_le_vec" ++ want64=true ++ ;; + mips*-*-elf* | mips*-*-rtems* | mips*-*-windiss | mips*-*-none) + targ_defvec=mips_elf32_be_vec + targ_selvecs="mips_elf32_le_vec mips_elf64_be_vec mips_elf64_le_vec" +diff --git a/bfd/cpu-mips.c b/bfd/cpu-mips.c +index d209fb6..b6a86ae 100644 +--- a/bfd/cpu-mips.c ++++ b/bfd/cpu-mips.c +@@ -104,7 +104,8 @@ enum + I_mipsocteon2, + I_mipsocteon3, + I_xlr, +- I_micromips ++ I_micromips, ++ I_xlp + }; + + #define NN(index) (&arch_info_struct[(index) + 1]) +@@ -155,7 +156,8 @@ static const bfd_arch_info_type arch_info_struct[] = + N (64, 64, bfd_mach_mips_octeon2,"mips:octeon2", FALSE, NN(I_mipsocteon2)), + N (64, 64, bfd_mach_mips_octeon3, "mips:octeon3", FALSE, NN(I_mipsocteon3)), + N (64, 64, bfd_mach_mips_xlr, "mips:xlr", FALSE, NN(I_xlr)), +- N (64, 64, bfd_mach_mips_micromips,"mips:micromips",FALSE,0) ++ N (64, 64, bfd_mach_mips_micromips,"mips:micromips",FALSE,NN(I_micromips)), ++ N (64, 64, bfd_mach_mips_xlp, "mips:xlp", FALSE, 0) + }; + + /* The default architecture is mips:3000, but with a machine number of +diff --git a/bfd/elfxx-mips.c b/bfd/elfxx-mips.c +index e47276b..71c30a0 100644 +--- a/bfd/elfxx-mips.c ++++ b/bfd/elfxx-mips.c +@@ -6646,6 +6646,9 @@ _bfd_elf_mips_mach (flagword flags) + case E_MIPS_MACH_XLR: + return bfd_mach_mips_xlr; + ++ case E_MIPS_MACH_XLP: ++ return bfd_mach_mips_xlp; ++ + default: + switch (flags & EF_MIPS_ARCH) + { +@@ -11949,6 +11952,10 @@ mips_set_isa_flags (bfd *abfd) + val = E_MIPS_ARCH_64R2 | E_MIPS_MACH_OCTEON2; + break; + ++ case bfd_mach_mips_xlp: ++ val = E_MIPS_ARCH_64R2 | E_MIPS_MACH_XLP; ++ break; ++ + case bfd_mach_mipsisa32: + val = E_MIPS_ARCH_32; + break; +@@ -13975,6 +13982,7 @@ static const struct mips_mach_extension mips_mach_extensions[] = + { bfd_mach_mips_octeonp, bfd_mach_mips_octeon }, + { bfd_mach_mips_octeon, bfd_mach_mipsisa64r2 }, + { bfd_mach_mips_loongson_3a, bfd_mach_mipsisa64r2 }, ++ { bfd_mach_mips_xlp, bfd_mach_mipsisa64r2 }, + + /* MIPS64 extensions. */ + { bfd_mach_mipsisa64r2, bfd_mach_mipsisa64 }, +diff --git a/binutils/readelf.c b/binutils/readelf.c +index 274ddd1..d31558c 100644 +--- a/binutils/readelf.c ++++ b/binutils/readelf.c +@@ -3230,6 +3230,7 @@ get_machine_flags (unsigned e_flags, unsigned e_machine) + case E_MIPS_MACH_OCTEON2: strcat (buf, ", octeon2"); break; + case E_MIPS_MACH_OCTEON3: strcat (buf, ", octeon3"); break; + case E_MIPS_MACH_XLR: strcat (buf, ", xlr"); break; ++ case E_MIPS_MACH_XLP: strcat (buf, ", xlp"); break; + case 0: + /* We simply ignore the field in this case to avoid confusion: + MIPS ELF does not specify EF_MIPS_MACH, it is a GNU +diff --git a/gas/config/tc-mips.c b/gas/config/tc-mips.c +index eb8b26b..e59dce6 100644 +--- a/gas/config/tc-mips.c ++++ b/gas/config/tc-mips.c +@@ -552,6 +552,7 @@ static int mips_32bitmode = 0; + || mips_opts.arch == CPU_RM7000 \ + || mips_opts.arch == CPU_VR5500 \ + || mips_opts.micromips \ ++ || mips_opts.arch == CPU_XLP \ + ) + + /* Whether the processor uses hardware interlocks to protect reads +@@ -581,6 +582,7 @@ static int mips_32bitmode = 0; + && mips_opts.isa != ISA_MIPS3) \ + || mips_opts.arch == CPU_R4300 \ + || mips_opts.micromips \ ++ || mips_opts.arch == CPU_XLP \ + ) + + /* Whether the processor uses hardware interlocks to protect reads +@@ -18858,7 +18860,7 @@ static const struct mips_cpu_info mips_cpu_info_table[] = + /* Broadcom XLP. + XLP is mostly like XLR, with the prominent exception that it is + MIPS64R2 rather than MIPS64. */ +- { "xlp", 0, 0, ISA_MIPS64R2, CPU_XLR }, ++ { "xlp", 0, 0, ISA_MIPS64R2, CPU_XLP }, + + /* MIPS 64 Release 6 */ + { "i6400", 0, ASE_MSA, ISA_MIPS64R6, CPU_MIPS64R6}, +diff --git a/gas/configure b/gas/configure +index 45da030..aba89f7 100755 +--- a/gas/configure ++++ b/gas/configure +@@ -12914,6 +12914,9 @@ _ACEOF + mipsisa64r6 | mipsisa64r6el) + mips_cpu=mips64r6 + ;; ++ mipsisa64r2nlm | mipsisa64r2nlmel) ++ mips_cpu=xlp ++ ;; + mipstx39 | mipstx39el) + mips_cpu=r3900 + ;; +diff --git a/gas/configure.tgt b/gas/configure.tgt +index 1b9fd99..a9f1977 100644 +--- a/gas/configure.tgt ++++ b/gas/configure.tgt +@@ -339,7 +339,7 @@ case ${generic_target} in + mips-*-sysv4*MP* | mips-*-gnu*) fmt=elf em=tmips ;; + mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*) + fmt=elf em=tmips ;; +- mips-*-elf* | mips-*-rtems*) fmt=elf ;; ++ mips-*-elf* | mips-*-rtems*) fmt=elf em=tmips ;; + mips-*-netbsd*) fmt=elf em=tmips ;; + mips-*-openbsd*) fmt=elf em=tmips ;; + +diff --git a/include/elf/mips.h b/include/elf/mips.h +index 7e813de..d7d72c1 100644 +--- a/include/elf/mips.h ++++ b/include/elf/mips.h +@@ -290,6 +290,7 @@ END_RELOC_NUMBERS (R_MIPS_maxext) + #define E_MIPS_MACH_SB1 0x008a0000 + #define E_MIPS_MACH_OCTEON 0x008b0000 + #define E_MIPS_MACH_XLR 0x008c0000 ++#define E_MIPS_MACH_XLP 0x008f0000 + #define E_MIPS_MACH_OCTEON2 0x008d0000 + #define E_MIPS_MACH_OCTEON3 0x008e0000 + #define E_MIPS_MACH_5400 0x00910000 +diff --git a/include/opcode/mips.h b/include/opcode/mips.h +index b1d4ef6..f2c8e88 100644 +--- a/include/opcode/mips.h ++++ b/include/opcode/mips.h +@@ -1232,8 +1232,10 @@ static const unsigned int mips_isa_table[] = { + #define INSN_LOONGSON_2F 0x80000000 + /* Loongson 3A. */ + #define INSN_LOONGSON_3A 0x00000400 +-/* RMI Xlr instruction */ +-#define INSN_XLR 0x00000020 ++/* Netlogic Xlr instruction */ ++#define INSN_XLR 0x00000020 ++/* Netlogic XlP instruction */ ++#define INSN_XLP 0x00000080 + + /* DSP ASE */ + #define ASE_DSP 0x00000001 +@@ -1331,6 +1333,7 @@ static const unsigned int mips_isa_table[] = { + #define CPU_OCTEON2 6502 + #define CPU_OCTEON3 6503 + #define CPU_XLR 887682 /* decimal 'XLR' */ ++#define CPU_XLP 887680 /* decimal 'XLP' */ + + /* Return true if the given CPU is included in INSN_* mask MASK. */ + +@@ -1408,6 +1411,9 @@ cpu_is_member (int cpu, unsigned int mask) + return ((mask & INSN_ISA_MASK) == INSN_ISA32R6) + || ((mask & INSN_ISA_MASK) == INSN_ISA64R6); + ++ case CPU_XLP: ++ return (mask & INSN_XLP) != 0; ++ + default: + return FALSE; + } +diff --git a/ld/configure.tgt b/ld/configure.tgt +index 212327c..212e09c 100644 +--- a/ld/configure.tgt ++++ b/ld/configure.tgt +@@ -499,6 +499,8 @@ mips*el-sde-elf* | mips*el-mti-elf* | mips*el-img-elf*) + mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*) + targ_emul=elf32btsmip + targ_extra_emuls="elf32ltsmip elf32btsmipn32 elf64btsmip elf32ltsmipn32 elf64ltsmip" ;; ++mipsisa64*-*-elf*) targ_emul=elf32btsmip ++ targ_extra_emuls="elf32ltsmip elf64btsmip elf64ltsmip" ;; + mips64*el-ps2-elf*) targ_emul=elf32lr5900n32 + targ_extra_emuls="elf32lr5900" + targ_extra_libpath=$targ_extra_emuls ;; +diff --git a/opcodes/mips-dis.c b/opcodes/mips-dis.c +index 3f874e7..9813d0e 100644 +--- a/opcodes/mips-dis.c ++++ b/opcodes/mips-dis.c +@@ -648,13 +648,11 @@ const struct mips_arch_choice mips_arch_choices[] = + mips_cp0sel_names_xlr, ARRAY_SIZE (mips_cp0sel_names_xlr), + mips_cp1_names_mips3264, mips_hwr_names_numeric }, + +- /* XLP is mostly like XLR, with the prominent exception it is being +- MIPS64R2. */ +- { "xlp", 1, bfd_mach_mips_xlr, CPU_XLR, +- ISA_MIPS64R2 | INSN_XLR, 0, +- mips_cp0_names_xlr, +- mips_cp0sel_names_xlr, ARRAY_SIZE (mips_cp0sel_names_xlr), +- mips_cp1_names_mips3264, mips_hwr_names_numeric }, ++ { "xlp", 1, bfd_mach_mips_xlp, CPU_XLP, ++ ISA_MIPS64R2 | INSN_XLP, 0, ++ mips_cp0_names_mips3264r2, ++ mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), ++ mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, + + /* This entry, mips16, is here only for ISA/processor selection; do + not print its name. */ +diff --git a/opcodes/mips-opc.c b/opcodes/mips-opc.c +index a95eff1..99fb7bb 100644 +--- a/opcodes/mips-opc.c ++++ b/opcodes/mips-opc.c +@@ -320,7 +320,8 @@ decode_mips_operand (const char *p) + #define IOCTP (INSN_OCTEONP | INSN_OCTEON2 | INSN_OCTEON3) + #define IOCT2 (INSN_OCTEON2 | INSN_OCTEON3) + #define IOCT3 INSN_OCTEON3 +-#define XLR INSN_XLR ++#define XLR INSN_XLR ++#define XLP INSN_XLP + #define IVIRT ASE_VIRT + #define IVIRT64 ASE_VIRT64 + +@@ -958,6 +959,7 @@ const struct mips_opcode mips_builtin_opcodes[] = + {"clo", "U,s", 0x70000021, 0xfc0007ff, WR_1|RD_2, 0, I32|N55, 0, I37 }, + {"clz", "d,s", 0x00000050, 0xfc1f07ff, WR_1|RD_2, 0, I37, 0, 0 }, + {"clz", "U,s", 0x70000020, 0xfc0007ff, WR_1|RD_2, 0, I32|N55, 0, I37 }, ++{"crc", "d,s,t", 0x7000001c, 0xfc0007ff, WR_1|RD_2|RD_3, 0, XLP, 0, 0 }, + /* ctc0 is at the bottom of the table. */ + {"ctc1", "t,G", 0x44c00000, 0xffe007ff, RD_1|WR_CC|CM, 0, I1, 0, 0 }, + {"ctc1", "t,S", 0x44c00000, 0xffe007ff, RD_1|WR_CC|CM, 0, I1, 0, 0 }, +@@ -990,12 +992,13 @@ const struct mips_opcode mips_builtin_opcodes[] = + {"daddiu", "t,r,j", 0x64000000, 0xfc000000, WR_1|RD_2, 0, I3, 0, 0 }, + {"daddu", "d,v,t", 0x0000002d, 0xfc0007ff, WR_1|RD_2|RD_3, 0, I3, 0, 0 }, + {"daddu", "t,r,I", 0, (int) M_DADDU_I, INSN_MACRO, 0, I3, 0, 0 }, +-{"daddwc", "d,s,t", 0x70000038, 0xfc0007ff, WR_1|RD_2|RD_3|WR_C0|RD_C0, 0, XLR, 0, 0 }, ++{"daddwc", "d,s,t", 0x70000038, 0xfc0007ff, WR_1|RD_2|RD_3|WR_C0|RD_C0, 0, XLR|XLP, 0, 0 }, + {"dbreak", "", 0x7000003f, 0xffffffff, 0, 0, N5, 0, 0 }, + {"dclo", "d,s", 0x00000053, 0xfc1f07ff, WR_1|RD_2, 0, I69, 0, 0 }, + {"dclo", "U,s", 0x70000025, 0xfc0007ff, WR_1|RD_2, 0, I64|N55, 0, I69 }, + {"dclz", "d,s", 0x00000052, 0xfc1f07ff, WR_1|RD_2, 0, I69, 0, 0 }, + {"dclz", "U,s", 0x70000024, 0xfc0007ff, WR_1|RD_2, 0, I64|N55, 0, I69 }, ++{"dcrc", "d,s,t", 0x7000001d, 0xfc0007ff, WR_1|RD_2|RD_3, 0, XLP, 0, 0 }, + /* dctr and dctw are used on the r5000. */ + {"dctr", "o(b)", 0xbc050000, 0xfc1f0000, RD_2, 0, I3, 0, 0 }, + {"dctw", "o(b)", 0xbc090000, 0xfc1f0000, RD_2, 0, I3, 0, 0 }, +@@ -1067,6 +1070,7 @@ const struct mips_opcode mips_builtin_opcodes[] = + {"dmfc0", "t,G,H", 0x40200000, 0xffe007f8, WR_1|RD_C0|LC, 0, I64, 0, 0 }, + {"dmfgc0", "t,G", 0x40600100, 0xffe007ff, WR_1|RD_C0|LC, 0, 0, IVIRT64, 0 }, + {"dmfgc0", "t,G,H", 0x40600100, 0xffe007f8, WR_1|RD_C0|LC, 0, 0, IVIRT64, 0 }, ++{"dmfur", "t,d", 0x7000001e, 0xffe007ff, WR_1, 0, XLP, 0, 0 }, + {"dmt", "", 0x41600bc1, 0xffffffff, TRAP, 0, 0, MT32, 0 }, + {"dmt", "t", 0x41600bc1, 0xffe0ffff, WR_1|TRAP, 0, 0, MT32, 0 }, + {"dmtc0", "t,G", 0x40a00000, 0xffe007ff, RD_1|WR_C0|WR_CC|CM, 0, I3, 0, EE }, +@@ -1082,6 +1086,8 @@ const struct mips_opcode mips_builtin_opcodes[] = + /* dmfc3 is at the bottom of the table. */ + /* dmtc3 is at the bottom of the table. */ + {"dmuh", "d,s,t", 0x000000dc, 0xfc0007ff, WR_1|RD_2|RD_3, 0, I69, 0, 0 }, ++{"dmtur", "t,d", 0x7000001f, 0xffe007ff, RD_1, 0, XLP, 0, 0 }, ++{"dmul", "d,s,t", 0x70000006, 0xfc0007ff, WR_1|RD_2|RD_3, 0, XLP, 0, 0 }, + {"dmul", "d,s,t", 0x0000009c, 0xfc0007ff, WR_1|RD_2|RD_3, 0, I69, 0, 0 }, + {"dmul", "d,v,t", 0x70000003, 0xfc0007ff, WR_1|RD_2|RD_3|WR_HILO, 0, IOCT, 0, 0 }, + {"dmul", "d,v,t", 0, (int) M_DMUL, INSN_MACRO, 0, I3, 0, M32|I69 }, +@@ -1235,9 +1241,9 @@ const struct mips_opcode mips_builtin_opcodes[] = + {"ld", "s,-b(+R)", 0xec180000, 0xfc1c0000, WR_1, RD_pc, I69, 0, 0 }, + {"ld", "t,A(b)", 0, (int) M_LD_AB, INSN_MACRO, 0, I1, 0, 0 }, + {"ld", "t,o(b)", 0xdc000000, 0xfc000000, WR_1|RD_3|LM, 0, I3, 0, 0 }, +-{"ldaddw", "t,b", 0x70000010, 0xfc00ffff, MOD_1|RD_2|LM|SM, 0, XLR, 0, 0 }, +-{"ldaddwu", "t,b", 0x70000011, 0xfc00ffff, MOD_1|RD_2|LM|SM, 0, XLR, 0, 0 }, +-{"ldaddd", "t,b", 0x70000012, 0xfc00ffff, MOD_1|RD_2|LM|SM, 0, XLR, 0, 0 }, ++{"ldaddw", "t,b", 0x70000010, 0xfc00ffff, MOD_1|RD_2|SM, 0, XLR|XLP, 0, 0 }, ++{"ldaddwu", "t,b", 0x70000011, 0xfc00ffff, MOD_1|RD_2|SM, 0, XLR|XLP, 0, 0 }, ++{"ldaddd", "t,b", 0x70000012, 0xfc00ffff, MOD_1|RD_2|SM, 0, XLR|XLP, 0, 0 }, + {"ldc1", "T,o(b)", 0xd4000000, 0xfc000000, WR_1|RD_3|CLD|FP_D, 0, I2, 0, SF }, + {"ldc1", "E,o(b)", 0xd4000000, 0xfc000000, WR_1|RD_3|CLD|FP_D, 0, I2, 0, SF }, + {"ldc1", "T,A(b)", 0, (int) M_LDC1_AB, INSN_MACRO, INSN2_M_FP_D, I2, 0, SF }, +@@ -1402,7 +1408,7 @@ const struct mips_opcode mips_builtin_opcodes[] = + {"mflo", "d,9", 0x00000012, 0xff9f07ff, WR_1|RD_LO, 0, 0, D32, 0 }, + {"mflo1", "d", 0x70000012, 0xffff07ff, WR_1|RD_LO, 0, EE, 0, 0 }, + {"mflhxu", "d", 0x00000052, 0xffff07ff, WR_1|MOD_HILO, 0, 0, SMT, 0 }, +-{"mfcr", "t,s", 0x70000018, 0xfc00ffff, WR_1|RD_2, 0, XLR, 0, 0 }, ++{"mfcr", "t,s", 0x70000018, 0xfc00ffff, WR_1, 0, XLR|XLP, 0, 0 }, + {"mfsa", "d", 0x00000028, 0xffff07ff, WR_1, 0, EE, 0, 0 }, + {"min.ob", "X,Y,Q", 0x78000006, 0xfc20003f, WR_1|RD_2|RD_3|FP_D, 0, SB1, MX, 0 }, + {"min.ob", "D,S,Q", 0x48000006, 0xfc20003f, WR_1|RD_2|RD_3|FP_D, 0, N54, 0, 0 }, +@@ -1447,10 +1453,13 @@ const struct mips_opcode mips_builtin_opcodes[] = + /* move is at the top of the table. */ + {"msgn.qh", "X,Y,Q", 0x78200000, 0xfc20003f, WR_1|RD_2|RD_3|FP_D, 0, 0, MX, 0 }, + {"msgsnd", "t", 0, (int) M_MSGSND, INSN_MACRO, 0, XLR, 0, 0 }, ++{"msgsnds", "d,t", 0x4a000001, 0xffe007ff, WR_1|RD_2|RD_C0|WR_C0, 0, XLP, 0, 0 }, + {"msgld", "", 0, (int) M_MSGLD, INSN_MACRO, 0, XLR, 0, 0 }, + {"msgld", "t", 0, (int) M_MSGLD_T, INSN_MACRO, 0, XLR, 0, 0 }, +-{"msgwait", "", 0, (int) M_MSGWAIT, INSN_MACRO, 0, XLR, 0, 0 }, +-{"msgwait", "t", 0, (int) M_MSGWAIT_T,INSN_MACRO, 0, XLR, 0, 0 }, ++{"msglds", "d,t", 0x4a000002, 0xffe007ff, WR_1|RD_2|RD_C0|WR_C0, 0, XLP, 0, 0 }, ++{"msgwait", "", 0, (int) M_MSGWAIT, INSN_MACRO, 0, XLR|XLP, 0, 0 }, ++{"msgwait", "t", 0, (int) M_MSGWAIT_T,INSN_MACRO, 0, XLR|XLP, 0, 0 }, ++{"msgsync", "", 0x4a000004, 0xffffffff,0, 0, XLP, 0, 0 }, + {"msub.d", "D,R,S,T", 0x4c000029, 0xfc00003f, WR_1|RD_2|RD_3|RD_4|FP_D, 0, I4_33, 0, I37 }, + {"msub.d", "D,S,T", 0x46200019, 0xffe0003f, WR_1|RD_2|RD_3|FP_D, 0, IL2E, 0, 0 }, + {"msub.d", "D,S,T", 0x72200019, 0xffe0003f, WR_1|RD_2|RD_3|FP_D, 0, IL2F, 0, 0 }, +@@ -1500,7 +1509,7 @@ const struct mips_opcode mips_builtin_opcodes[] = + {"mtlo", "s,7", 0x00000013, 0xfc1fe7ff, RD_1|WR_LO, 0, 0, D32, 0 }, + {"mtlo1", "s", 0x70000013, 0xfc1fffff, RD_1|WR_LO, 0, EE, 0, 0 }, + {"mtlhx", "s", 0x00000053, 0xfc1fffff, RD_1|MOD_HILO, 0, 0, SMT, 0 }, +-{"mtcr", "t,s", 0x70000019, 0xfc00ffff, RD_1|RD_2, 0, XLR, 0, 0 }, ++{"mtcr", "t,s", 0x70000019, 0xfc00ffff, RD_1, 0, XLR|XLP, 0, 0 }, + {"mtm0", "s", 0x70000008, 0xfc1fffff, RD_1, 0, IOCT, 0, 0 }, + {"mtm0", "s,t", 0x70000008, 0xfc00ffff, RD_1|RD_2, 0, IOCT3, 0, 0 }, + {"mtm1", "s", 0x7000000c, 0xfc1fffff, RD_1, 0, IOCT, 0, 0 }, +@@ -1937,9 +1946,9 @@ const struct mips_opcode mips_builtin_opcodes[] = + {"suxc1", "S,t(b)", 0x4c00000d, 0xfc0007ff, RD_1|RD_2|RD_3|SM|FP_D, 0, I5_33|N55, 0, I37}, + {"sw", "t,o(b)", 0xac000000, 0xfc000000, RD_1|RD_3|SM, 0, I1, 0, 0 }, + {"sw", "t,A(b)", 0, (int) M_SW_AB, INSN_MACRO, 0, I1, 0, 0 }, +-{"swapw", "t,b", 0x70000014, 0xfc00ffff, MOD_1|RD_2|LM|SM, 0, XLR, 0, 0 }, +-{"swapwu", "t,b", 0x70000015, 0xfc00ffff, MOD_1|RD_2|LM|SM, 0, XLR, 0, 0 }, +-{"swapd", "t,b", 0x70000016, 0xfc00ffff, MOD_1|RD_2|LM|SM, 0, XLR, 0, 0 }, ++{"swapw", "t,b", 0x70000014, 0xfc00ffff, MOD_1|RD_2|SM, 0, XLR|XLP, 0, 0 }, ++{"swapwu", "t,b", 0x70000015, 0xfc00ffff, MOD_1|RD_2|SM, 0, XLR|XLP, 0, 0 }, ++{"swapd", "t,b", 0x70000016, 0xfc00ffff, MOD_1|RD_2|SM, 0, XLR|XLP, 0, 0 }, + {"swc0", "E,o(b)", 0xe0000000, 0xfc000000, RD_3|RD_C0|SM, 0, I1, 0, IOCT|IOCTP|IOCT2|I37 }, + {"swc0", "E,A(b)", 0, (int) M_SWC0_AB, INSN_MACRO, 0, I1, 0, IOCT|IOCTP|IOCT2|I37 }, + {"swc1", "T,o(b)", 0xe4000000, 0xfc000000, RD_1|RD_3|SM|FP_S, 0, I1, 0, 0 }, +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0013-fix-the-incorrect-assembling-for-ppc-wait-mnemonic.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0013-fix-the-incorrect-assembling-for-ppc-wait-mnemonic.patch new file mode 100644 index 0000000..f314d64 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0013-fix-the-incorrect-assembling-for-ppc-wait-mnemonic.patch @@ -0,0 +1,36 @@ +From 0c04c3b626998c8e7b595381b35456428581f52a Mon Sep 17 00:00:00 2001 +From: Zhenhua Luo <zhenhua.luo(a)nxp.com> +Date: Sat, 11 Jun 2016 22:08:29 -0500 +Subject: [PATCH 13/13] fix the incorrect assembling for ppc wait mnemonic + +Signed-off-by: Zhenhua Luo <zhenhua.luo(a)nxp.com> + +Upstream-Status: Pending +--- + opcodes/ppc-opc.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +diff --git a/opcodes/ppc-opc.c b/opcodes/ppc-opc.c +index 8106ab7..ca4b0f3 100644 +--- a/opcodes/ppc-opc.c ++++ b/opcodes/ppc-opc.c +@@ -4811,7 +4811,6 @@ const struct powerpc_opcode powerpc_opcodes[] = { + {"ldepx", X(31,29), X_MASK, E500MC|PPCA2, 0, {RT, RA0, RB}}, + + {"waitasec", X(31,30), XRTRARB_MASK, POWER8, POWER9, {0}}, +-{"wait", X(31,30), XWC_MASK, POWER9, 0, {WC}}, + + {"lwepx", X(31,31), X_MASK, E500MC|PPCA2, 0, {RT, RA0, RB}}, + +@@ -4865,7 +4864,7 @@ const struct powerpc_opcode powerpc_opcodes[] = { + + {"waitrsv", X(31,62)|(1<<21), 0xffffffff, E500MC|PPCA2, 0, {0}}, + {"waitimpl", X(31,62)|(2<<21), 0xffffffff, E500MC|PPCA2, 0, {0}}, +-{"wait", X(31,62), XWC_MASK, E500MC|PPCA2, 0, {WC}}, ++{"wait", X(31,62), XWC_MASK, E500MC|PPCA2|POWER9, 0, {WC}}, + + {"dcbstep", XRT(31,63,0), XRT_MASK, E500MC|PPCA2, 0, {RA0, RB}}, + +-- +2.9.0 + diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0014-libtool-remove-rpath.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0014-libtool-remove-rpath.patch new file mode 100644 index 0000000..d56948f --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0014-libtool-remove-rpath.patch @@ -0,0 +1,100 @@ +Apply these patches from our libtool patches as not only are redundant RPATHs a +waste of space but they can cause incorrect linking when native packages are +restored from sstate. + +fix-rpath.patch: +We don't want to add RPATHS which match default linker +search paths, they're a waste of space. This patch +filters libtools list and removes the ones we don't need. + +norm-rpath.patch: +Libtool may be passed link paths of the form "/usr/lib/../lib", which +fool its detection code into thinking it should be included as an +RPATH in the generated binary. Normalize before comparision. + +Upstream-Status: Inappropriate +Signed-off-by: Ross Burton <ross.burton(a)intel.com> + +diff --git a/ltmain.sh b/ltmain.sh +index 683317c..860a16a 100644 +--- a/ltmain.sh ++++ b/ltmain.sh +@@ -8053,8 +8053,14 @@ EOF + esac + fi + else +- eval flag=\"$hardcode_libdir_flag_spec\" +- func_append dep_rpath " $flag" ++ # We only want to hardcode in an rpath if it isn't in the ++ # default dlsearch path. ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) eval flag=\"$hardcode_libdir_flag_spec\" ++ func_append dep_rpath " $flag" ++ ;; ++ esac + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in +@@ -8790,8 +8796,14 @@ EOF + esac + fi + else +- eval flag=\"$hardcode_libdir_flag_spec\" +- func_append rpath " $flag" ++ # We only want to hardcode in an rpath if it isn't in the ++ # default dlsearch path. ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath+=" $flag" ++ ;; ++ esac + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in +@@ -8841,8 +8853,14 @@ EOF + esac + fi + else +- eval flag=\"$hardcode_libdir_flag_spec\" +- func_append rpath " $flag" ++ # We only want to hardcode in an rpath if it isn't in the ++ # default dlsearch path. ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) eval flag=\"$hardcode_libdir_flag_spec\" ++ func_append rpath " $flag" ++ ;; ++ esac + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in +diff --git a/ltmain.sh b/ltmain.sh +index 683317c..860a16a 100644 +--- a/ltmain.sh ++++ b/ltmain.sh +@@ -8055,8 +8055,10 @@ EOF + else + # We only want to hardcode in an rpath if it isn't in the + # default dlsearch path. ++ func_normal_abspath "$libdir" ++ libdir_norm=$func_normal_abspath_result + case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; ++ *" $libdir_norm "*) ;; + *) eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + ;; +@@ -8798,8 +8800,10 @@ EOF + else + # We only want to hardcode in an rpath if it isn't in the + # default dlsearch path. ++ func_normal_abspath "$libdir" ++ libdir_norm=$func_normal_abspath_result + case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; ++ *" $libdir_norm "*) ;; + *) eval flag=\"$hardcode_libdir_flag_spec\" + rpath+=" $flag" + ;; diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0015-Refine-.cfi_sections-check-to-only-consider-compact-.patch b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0015-Refine-.cfi_sections-check-to-only-consider-compact-.patch new file mode 100644 index 0000000..f3e3a11 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0015-Refine-.cfi_sections-check-to-only-consider-compact-.patch @@ -0,0 +1,97 @@ +From 3d3424e9a8d6ad56160b98bf6e223c0346164468 Mon Sep 17 00:00:00 2001 +From: Matthew Fortune <matthew.fortune(a)imgtec.com> +Date: Thu, 29 Sep 2016 11:13:46 +0100 +Subject: [PATCH] Refine .cfi_sections check to only consider compact eh_frame + +The .cfi_sections directive can be safely used multiple times +with different sections named at any time unless the compact form +of exception handling is requested after CFI information has +been emitted. Only the compact form of CFI information changes +the way in which CFI is generated and therefore cannot be +retrospectively requested after generating CFI information. + +gas/ + + PR gas/20648 + * dw2gencfi.c (dot_cfi_sections): Refine the check for + inconsistent .cfi_sections to only consider compact vs non + compact forms. + * testsuite/gas/cfi/cfi-common-9.d: New file. + * testsuite/gas/cfi/cfi-common-9.s: New file. + * testsuite/gas/cfi/cfi.exp: Run new test. +--- +Upstream-Status: Backport +Signed-off-by: Khem Raj <raj.khem(a)gmail.com + + gas/ChangeLog | 10 ++++++++++ + gas/dw2gencfi.c | 5 ++++- + gas/testsuite/gas/cfi/cfi-common-9.d | 23 +++++++++++++++++++++++ + gas/testsuite/gas/cfi/cfi-common-9.s | 4 ++++ + gas/testsuite/gas/cfi/cfi.exp | 1 + + 5 files changed, 42 insertions(+), 1 deletion(-) + create mode 100644 gas/testsuite/gas/cfi/cfi-common-9.d + create mode 100644 gas/testsuite/gas/cfi/cfi-common-9.s + +Index: git/gas/dw2gencfi.c +=================================================================== +--- git.orig/gas/dw2gencfi.c ++++ git/gas/dw2gencfi.c +@@ -1244,7 +1244,10 @@ dot_cfi_sections (int ignored ATTRIBUTE_ + } + + demand_empty_rest_of_line (); +- if (cfi_sections_set && cfi_sections != sections) ++ if (cfi_sections_set ++ && (sections & (CFI_EMIT_eh_frame | CFI_EMIT_eh_frame_compact)) ++ && (cfi_sections & (CFI_EMIT_eh_frame | CFI_EMIT_eh_frame_compact)) ++ != (sections & (CFI_EMIT_eh_frame | CFI_EMIT_eh_frame_compact))) + as_bad (_("inconsistent uses of .cfi_sections")); + cfi_sections = sections; + } +Index: git/gas/testsuite/gas/cfi/cfi-common-9.d +=================================================================== +--- /dev/null ++++ git/gas/testsuite/gas/cfi/cfi-common-9.d +@@ -0,0 +1,23 @@ ++#objdump: -Wf ++#name: CFI common 9 ++#... ++Contents of the .eh_frame section: ++ ++00000000 0+0010 0+0000 CIE ++ Version: 1 ++ Augmentation: "zR" ++ Code alignment factor: .* ++ Data alignment factor: .* ++ Return address column: .* ++ Augmentation data: [01]b ++ ++ DW_CFA_nop ++ DW_CFA_nop ++ DW_CFA_nop ++ ++00000014 0+00(10|18|1c|20) 0+0018 FDE cie=0+0000 pc=.* ++ ++ DW_CFA_nop ++ DW_CFA_nop ++ DW_CFA_nop ++#... +Index: git/gas/testsuite/gas/cfi/cfi-common-9.s +=================================================================== +--- /dev/null ++++ git/gas/testsuite/gas/cfi/cfi-common-9.s +@@ -0,0 +1,4 @@ ++ .cfi_sections .eh_frame ++ .cfi_startproc simple ++ .cfi_sections .debug_frame ++ .cfi_endproc +Index: git/gas/testsuite/gas/cfi/cfi.exp +=================================================================== +--- git.orig/gas/testsuite/gas/cfi/cfi.exp ++++ git/gas/testsuite/gas/cfi/cfi.exp +@@ -135,4 +135,5 @@ if { ![istarget "hppa64*-*"] } then { + run_dump_test "cfi-common-6" + } + run_dump_test "cfi-common-7" ++ run_dump_test "cfi-common-9" + } diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0015-binutils-mips-gas-pic-relax-linkonce.diff b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0015-binutils-mips-gas-pic-relax-linkonce.diff new file mode 100644 index 0000000..78b971a --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils-linaro-2.27/0015-binutils-mips-gas-pic-relax-linkonce.diff @@ -0,0 +1,65 @@ +Patch taken from Binutils Bugzilla: + + https://sourceware.org/bugzilla/show_bug.cgi?id=20649 + +Upstream-Status: Pending + +Signed-off-by: Andre McCurdy <armccurdy(a)gmail.com> + +Index: binutils/gas/config/tc-mips.c +=================================================================== +--- binutils.orig/gas/config/tc-mips.c 2016-09-29 05:12:31.000000000 +0100 ++++ binutils/gas/config/tc-mips.c 2016-09-29 20:05:13.257411084 +0100 +@@ -1353,7 +1353,7 @@ static void s_mips_stab (int); + static void s_mips_weakext (int); + static void s_mips_file (int); + static void s_mips_loc (int); +-static bfd_boolean pic_need_relax (symbolS *, asection *); ++static bfd_boolean pic_need_relax (symbolS *); + static int relaxed_branch_length (fragS *, asection *, int); + static int relaxed_micromips_16bit_branch_length (fragS *, asection *, int); + static int relaxed_micromips_32bit_branch_length (fragS *, asection *, int); +@@ -4258,6 +4258,8 @@ mips_move_text_labels (void) + mips_move_labels (seg_info (now_seg)->label_list, TRUE); + } + ++/* Duplicate the test for LINK_ONCE sections as in `adjust_reloc_syms'. */ ++ + static bfd_boolean + s_is_linkonce (symbolS *sym, segT from_seg) + { +@@ -14823,7 +14825,7 @@ mips_frob_file (void) + constants; we'll report an error for those later. */ + if (got16_reloc_p (l->fixp->fx_r_type) + && !(l->fixp->fx_addsy +- && pic_need_relax (l->fixp->fx_addsy, l->seg))) ++ && pic_need_relax (l->fixp->fx_addsy))) + continue; + + /* Check quickly whether the next fixup happens to be a matching %lo. */ +@@ -17043,7 +17045,7 @@ nopic_need_relax (symbolS *sym, int befo + /* Return true if the given symbol should be considered local for SVR4 PIC. */ + + static bfd_boolean +-pic_need_relax (symbolS *sym, asection *segtype) ++pic_need_relax (symbolS *sym) + { + asection *symsec; + +@@ -17068,7 +17070,6 @@ pic_need_relax (symbolS *sym, asection * + return (!bfd_is_und_section (symsec) + && !bfd_is_abs_section (symsec) + && !bfd_is_com_section (symsec) +- && !s_is_linkonce (sym, segtype) + /* A global or weak symbol is treated as external. */ + && (!S_IS_WEAK (sym) && !S_IS_EXTERNAL (sym))); + } +@@ -17507,7 +17508,7 @@ md_estimate_size_before_relax (fragS *fr + if (mips_pic == NO_PIC) + change = nopic_need_relax (fragp->fr_symbol, 0); + else if (mips_pic == SVR4_PIC) +- change = pic_need_relax (fragp->fr_symbol, segtype); ++ change = pic_need_relax (fragp->fr_symbol); + else if (mips_pic == VXWORKS_PIC) + /* For vxworks, GOT16 relocations never have a corresponding LO16. */ + change = 0; diff --git a/meta-linaro-toolchain/recipes-devtools/binutils/binutils_linaro-2.27.bb b/meta-linaro-toolchain/recipes-devtools/binutils/binutils_linaro-2.27.bb new file mode 100644 index 0000000..8d3f6fe --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/binutils/binutils_linaro-2.27.bb @@ -0,0 +1,45 @@ +require recipes-devtools/binutils/binutils.inc +require recipes-devtools/binutils/binutils-${PV}.inc + +DEPENDS += "flex bison zlib" + +EXTRA_OECONF += "--with-sysroot=/ \ + --enable-install-libbfd \ + --enable-install-libiberty \ + --enable-shared \ + --with-system-zlib \ + " + +EXTRA_OEMAKE_append_libc-musl = "\ + gt_cv_func_gnugettext1_libc=yes \ + gt_cv_func_gnugettext2_libc=yes \ + " +EXTRA_OECONF_class-native = "--enable-targets=all \ + --enable-64-bit-bfd \ + --enable-install-libiberty \ + --enable-install-libbfd \ + --disable-werror" + +do_install_class-native () { + autotools_do_install + + # Install the libiberty header + install -d ${D}${includedir} + install -m 644 ${S}/include/ansidecl.h ${D}${includedir} + install -m 644 ${S}/include/libiberty.h ${D}${includedir} + + # We only want libiberty, libbfd and libopcodes + rm -rf ${D}${bindir} + rm -rf ${D}${prefix}/${TARGET_SYS} + rm -rf ${D}${prefix}/lib/ldscripts + rm -rf ${D}${prefix}/share/info + rm -rf ${D}${prefix}/share/locale + rm -rf ${D}${prefix}/share/man + rmdir ${D}${prefix}/share || : + rmdir ${D}/${libdir}/gcc-lib || : + rmdir ${D}/${libdir}64/gcc-lib || : + rmdir ${D}/${libdir} || : + rmdir ${D}/${libdir}64 || : +} + +BBCLASSEXTEND = "native nativesdk" -- 2.7.4

9 years, 7 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

OpenEmbedded