Hi,
I just tried to run demo1 from a docker setup.
I can run the demo1 using docker but the demo does not work (some error 95 in kernel transmitting FF-A messages, it went out to far so i could not copy paste it).
Cheers Bertrand
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Hi Bertrand,
On 2/13/25 12:07 PM, Bertrand Marquis wrote:
Hi,
I just tried to run demo1 from a docker setup.
I can run the demo1 using docker but the demo does not work (some error 95 in kernel transmitting FF-A messages, it went out to far so i could not copy paste it).
Thanks for giving it a try.
I have had a number of people run demo1 successfully so I would like to understand what is going on for you.
Are you behind a firewall? Do you need to configure a proxy to get to the internet?
All the serial logs are captured in the logs/ dir. Can you send them to me somehow?
Thanks, Bill
Cheers Bertrand
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ Virtio-msg mailing list -- virtio-msg@lists.linaro.org To unsubscribe send an email to virtio-msg-leave@lists.linaro.org
Hi Bill,
Sorry for the delay.
On 14 Feb 2025, at 16:31, Bill Mills bill.mills@linaro.org wrote:
Hi Bertrand,
On 2/13/25 12:07 PM, Bertrand Marquis wrote:
Hi, I just tried to run demo1 from a docker setup. I can run the demo1 using docker but the demo does not work (some error 95 in kernel transmitting FF-A messages, it went out to far so i could not copy paste it).
Thanks for giving it a try.
I have had a number of people run demo1 successfully so I would like to understand what is going on for you.
Are you behind a firewall? Do you need to configure a proxy to get to the internet?
No i am not.
All the serial logs are captured in the logs/ dir. Can you send them to me somehow?
Here is the error i can see in the logs: [ 1.084497] ARM FF-A: Driver version 1.2^M [ 1.084657] ARM FF-A: Firmware version 1.1 found^M Created device 1 / 0 [ 1.094766] virtio-msg-ffa arm-ffa-1: Unable to send direct FFA message: -95^M [ 1.161208] virtio-msg-ffa arm-ffa-1: Using dom0 as backend^M
Tell me if you need the full logs.
Cheers Bertrand
Thanks, Bill
Cheers Bertrand IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ Virtio-msg mailing list -- virtio-msg@lists.linaro.org To unsubscribe send an email to virtio-msg-leave@lists.linaro.org
-- Bill Mills Principal Technical Consultant, Linaro +1-240-643-0836 TZ: US Eastern Work Schedule: Tues/Wed/Thur _______________________________________________ Virtio-msg mailing list -- virtio-msg@lists.linaro.org To unsubscribe send an email to virtio-msg-leave@lists.linaro.org
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Hi Bertrand,
On 2/24/25 5:04 AM, Bertrand Marquis wrote:
Hi Bill,
Sorry for the delay.
On 14 Feb 2025, at 16:31, Bill Mills bill.mills@linaro.org wrote:
Hi Bertrand,
On 2/13/25 12:07 PM, Bertrand Marquis wrote:
Hi, I just tried to run demo1 from a docker setup. I can run the demo1 using docker but the demo does not work (some error 95 in kernel transmitting FF-A messages, it went out to far so i could not copy paste it).
Thanks for giving it a try.
I have had a number of people run demo1 successfully so I would like to understand what is going on for you.
Are you behind a firewall? Do you need to configure a proxy to get to the internet?
No i am not.
All the serial logs are captured in the logs/ dir. Can you send them to me somehow?
Here is the error i can see in the logs: [ 1.084497] ARM FF-A: Driver version 1.2^M [ 1.084657] ARM FF-A: Firmware version 1.1 found^M Created device 1 / 0 [ 1.094766] virtio-msg-ffa arm-ffa-1: Unable to send direct FFA message: -95^M [ 1.161208] virtio-msg-ffa arm-ffa-1: Using dom0 as backend^M
Tell me if you need the full logs.
Yes that message always comes out as Viresh tries to send direct first (and fails in this case) and then goes on to try indirect.
Please send the whole logs.
You can also update to latest "main" version and try again. I have not changed anything for running demo1 but I did do a fix for building demo1.
I presume you are using docker and not podman. I am testing podman now and demo1 and others work for me but demo2b does not. All demos work fine in docker.
Thanks, Bill
Cheers Bertrand
Thanks, Bill
Cheers Bertrand IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ Virtio-msg mailing list -- virtio-msg@lists.linaro.org To unsubscribe send an email to virtio-msg-leave@lists.linaro.org
-- Bill Mills Principal Technical Consultant, Linaro +1-240-643-0836 TZ: US Eastern Work Schedule: Tues/Wed/Thur _______________________________________________ Virtio-msg mailing list -- virtio-msg@lists.linaro.org To unsubscribe send an email to virtio-msg-leave@lists.linaro.org
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Hi Bill,
On 24 Feb 2025, at 14:16, Bill Mills bill.mills@linaro.org wrote:
Hi Bertrand,
On 2/24/25 5:04 AM, Bertrand Marquis wrote:
Hi Bill, Sorry for the delay.
On 14 Feb 2025, at 16:31, Bill Mills bill.mills@linaro.org wrote:
Hi Bertrand,
On 2/13/25 12:07 PM, Bertrand Marquis wrote:
Hi, I just tried to run demo1 from a docker setup. I can run the demo1 using docker but the demo does not work (some error 95 in kernel transmitting FF-A messages, it went out to far so i could not copy paste it).
Thanks for giving it a try.
I have had a number of people run demo1 successfully so I would like to understand what is going on for you.
Are you behind a firewall? Do you need to configure a proxy to get to the internet?
No i am not.
All the serial logs are captured in the logs/ dir. Can you send them to me somehow?
Here is the error i can see in the logs: [ 1.084497] ARM FF-A: Driver version 1.2^M [ 1.084657] ARM FF-A: Firmware version 1.1 found^M Created device 1 / 0 [ 1.094766] virtio-msg-ffa arm-ffa-1: Unable to send direct FFA message: -95^M [ 1.161208] virtio-msg-ffa arm-ffa-1: Using dom0 as backend^M Tell me if you need the full logs.
Yes that message always comes out as Viresh tries to send direct first (and fails in this case) and then goes on to try indirect.
ok
Please send the whole logs.
will send a private mail with them.
You can also update to latest "main" version and try again. I have not changed anything for running demo1 but I did do a fix for building demo1.
I will try tomorrow.
I presume you are using docker and not podman. I am testing podman now and demo1 and others work for me but demo2b does not. All demos work fine in docker.
Yes i am using docker.
Cheers Bertrand
Thanks, Bill
Cheers Bertrand
Thanks, Bill
Cheers Bertrand IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ Virtio-msg mailing list -- virtio-msg@lists.linaro.org To unsubscribe send an email to virtio-msg-leave@lists.linaro.org
-- Bill Mills Principal Technical Consultant, Linaro +1-240-643-0836 TZ: US Eastern Work Schedule: Tues/Wed/Thur _______________________________________________ Virtio-msg mailing list -- virtio-msg@lists.linaro.org To unsubscribe send an email to virtio-msg-leave@lists.linaro.org
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
-- Bill Mills Principal Technical Consultant, Linaro +1-240-643-0836 TZ: US Eastern Work Schedule: Tues/Wed/Thur
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
An update for the list:
The full logs showed that the demo had worked.
Bertrand is not sure why he thought it did not work and might have something to do with running tmux on his local machine and then ssh'ing into another to do the demo. I have tried this situation using my desktop and an aws-ec2 machine and did not see an issue.
-- Bill
On 2/24/25 8:33 AM, Bertrand Marquis wrote:
Hi Bill,
On 24 Feb 2025, at 14:16, Bill Mills bill.mills@linaro.org wrote:
Hi Bertrand,
On 2/24/25 5:04 AM, Bertrand Marquis wrote:
Hi Bill, Sorry for the delay.
On 14 Feb 2025, at 16:31, Bill Mills bill.mills@linaro.org wrote:
Hi Bertrand,
On 2/13/25 12:07 PM, Bertrand Marquis wrote:
Hi, I just tried to run demo1 from a docker setup. I can run the demo1 using docker but the demo does not work (some error 95 in kernel transmitting FF-A messages, it went out to far so i could not copy paste it).
Thanks for giving it a try.
I have had a number of people run demo1 successfully so I would like to understand what is going on for you.
Are you behind a firewall? Do you need to configure a proxy to get to the internet?
No i am not.
All the serial logs are captured in the logs/ dir. Can you send them to me somehow?
Here is the error i can see in the logs: [ 1.084497] ARM FF-A: Driver version 1.2^M [ 1.084657] ARM FF-A: Firmware version 1.1 found^M Created device 1 / 0 [ 1.094766] virtio-msg-ffa arm-ffa-1: Unable to send direct FFA message: -95^M [ 1.161208] virtio-msg-ffa arm-ffa-1: Using dom0 as backend^M Tell me if you need the full logs.
Yes that message always comes out as Viresh tries to send direct first (and fails in this case) and then goes on to try indirect.
ok
Please send the whole logs.
will send a private mail with them.
You can also update to latest "main" version and try again. I have not changed anything for running demo1 but I did do a fix for building demo1.
I will try tomorrow.
I presume you are using docker and not podman. I am testing podman now and demo1 and others work for me but demo2b does not. All demos work fine in docker.
Yes i am using docker.
Cheers Bertrand
Thanks, Bill
Cheers Bertrand
Thanks, Bill
Cheers Bertrand IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ Virtio-msg mailing list -- virtio-msg@lists.linaro.org To unsubscribe send an email to virtio-msg-leave@lists.linaro.org
-- Bill Mills Principal Technical Consultant, Linaro +1-240-643-0836 TZ: US Eastern Work Schedule: Tues/Wed/Thur _______________________________________________ Virtio-msg mailing list -- virtio-msg@lists.linaro.org To unsubscribe send an email to virtio-msg-leave@lists.linaro.org
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
-- Bill Mills Principal Technical Consultant, Linaro +1-240-643-0836 TZ: US Eastern Work Schedule: Tues/Wed/Thur
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
-
Bertrand Marquis -
Bill Mills