Linaro-android

linaro-android@lists.linaro.org

1072 discussions

Do you use (review.)android.git.linaro.org?

by Philip Colmer

This email is going to a rather wide audience so my apologies if it isn't relevant to you. If you don't use android.git.linaro.org or review.android.git.linaro.org, you can ignore the rest of this email. If you use either of these servers, please note that there will be planned maintenance between 2pm and 5pm, GMT+1, this Friday, 17th May. We are moving the server from Canonical to Amazon EC2. If you currently use review.android.git.linaro.org and sign in on it, please read the following information VERY CAREFULLY! At the moment, users are authenticated via OpenID with Launchpad. We are changing that to use OpenID with the Linaro Login service. If you don't know if you have a Linaro Login account, or you want to check that it is going to work properly: * Go to https://login.linaro.org:8443/openidserver. * If you are asked to log in, please enter your EMAIL ADDRESS and your Linaro Login password. If you don't know what your Linaro Login password is, or you cannot successfully log in, please contact me as soon as possible! * The web page should now display a URL of the format https://login.linaro.org:8443/openidserver/users/<your email address>. This is your OpenID URL and means you will be ready to follow the link identity instructions below. After the maintenance has been completed, you will need to take the following steps ONCE: 1. Go to https://login.linaro.org:8443/openidserver. If you are asked to log in, please enter your EMAIL ADDRESS and your Linaro Login password. 2. The web page should now display a URL of the format https://login.linaro.org:8443/openidserver/users/<your email address>. Make a note of that, please. 3. Go to http://review.android.git.linaro.org/. Sign in with your Launchpad ID. 4. When you have signed in, click on the Settings link in the top right corner of the web page. 5. Click on the Identities link on the left hand side of the web page. 6. Click on Link Another Identity. 7. Enter the URL you noted from step 2 and click on Link Identity. 8. If your web browser session from step 2 has expired, you will be asked to log in again - enter the same information you entered at step 1. 9. If your web browser session has not expired, or once you have logged in, you will see a web page with the title "OpenID Verification". On the right hand side, click on Allow Always. You should now be back at the Settings page. If you want to check that you can now sign in with your Linaro Login credentials, click on Sign Out in the corner of the Gerrit window, click Sign In and this time use the URL from step 2 rather than your Launchpad URL. You should be logged straight in if you have not closed any web browser windows. PLEASE NOTE: we will be supporting both Launchpad and Linaro Login OpenID authentication until the *end of May*. After that time, we will be switching over to just Linaro Login and you will no longer have to enter the OpenID URL - Gerrit will authenticate you directly with Linaro Login. Please do NOT attempt the above instructions until after the maintenance has been completed. I am providing the information now so that (a) you have it ready for use and (b) I can help anyone out if they do not know their Linaro Login details. If you have any questions, please email me. Thank you. Regards Philip Colmer IT Services Manager Linaro

12 years, 1 month

Need android platform source code for ARM FastModels

by Sivamurugan .

12 years, 1 month

Agenda posted for Android Platform meeting

by Vishal Bhoj

Hi, The agenda has been posted for todays's meeting: https://wiki.linaro.org/Platform/Android/Meetings/2013-05-15 The same agenda is also posted in the doc: https://docs.google.com/a/linaro.org/document/d/1nuqwjLy_Bc3zrRYWOgMBzc4sny… Feel free to add agenda items to discuss. Regards, Vishal

12 years, 1 month

gcc 4.8 added to the repo

by Bernhard Rosenkränzer

Hi, I've added gcc 4.8 to the prebuilts repo -- if you want to start using it, simply replace 4.7 in TARGET_TOOLS_PREFIX with 4.8. I've updated the Galaxy Nexus build to use 4.8 for a start - so far, it's running nicely, except the software keyboard doesn't work. (Workaround: in development builds, the alternative Hackers' keyboard is included, that one works fine. Interestingly it's based on the same code originally.) ttyl bero

12 years, 1 month

[IT Services] Update: Android builds failing after git.linaro.org move

by Ben Copeland

##- Please type your reply above this line -## [IT Services] Update: Android builds failing after git.linaro.org move You are registered as a CC on this support request (linaroithelp.zendesk.com/requests/19). Reply to this email to add a comment to the request. ---------------------------------------------- Ben Copeland, May 13 10:56 (ADT) Hello, Great, thanks for letting us know. Ben ---------------------------------------------- Bernhard Rosenkränzer, May 13 10:31 (ADT) Hi, thanks, looks a lot better now. ttyl bero ---------------------------------------------- Ben Copeland, May 13 08:40 (ADT) Hello Bernhard, We have made a change to the git server, there was a rewrite problem. Please may you give it a try now? Thanks Ben ---------------------------------------------- Bernhard Rosenkränzer, May 13 07:34 (ADT) The certificate is no longer mentioned in the error, but Android builds still fail because they can't get needed bits from git.linaro.org. See e.g. this log: https://android-build.linaro.org/jenkins/job/linaro-android_galaxynexus-lin… ---------------------------------------------- Philip Colmer, May 13 05:29 (ADT) This has been resolved. Thank you for bringing it to our attention. ---------------------------------------------- Bernhard Rosenkränzer, May 12 12:55 (ADT) Hi, after the git.linaro.org migration, Android builds are failing. e.g.: https://android-build.linaro.org/jenkins/job/linaro-android_galaxynexus-lin… The problem seems to be with the SSL setup. error: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none while accessing http://git.linaro.org/git-ro/people/kejunzhou/tools_for_pm-qa.git/info/refs fatal: HTTP request failed error: Cannot fetch people/tomgall/libjpeg-turbo/libjpeg-turbo.git error: Cannot fetch tools/powerdebug.git error: Cannot fetch tools/powertop-2.0.git error: Cannot fetch people/kejunzhou/tools_for_pm-qa.git error: Exited sync due to fetch errors ++ infrastructure_error ++ echo 'Caught infrastructure error - finishing build with '\''Not Built'\'' status' Caught infrastructure error - finishing build with 'Not Built' status -------------------------------- This email is a service from IT Services

12 years, 1 month

[IT Services] Update: Android builds failing after git.linaro.org move

by Ben Copeland

##- Please type your reply above this line -## [IT Services] Update: Android builds failing after git.linaro.org move You are registered as a CC on this support request (linaroithelp.zendesk.com/requests/19). Reply to this email to add a comment to the request. ---------------------------------------------- Ben Copeland, May 13 08:40 (ADT) Hello Bernhard, We have made a change to the git server, there was a rewrite problem. Please may you give it a try now? Thanks Ben ---------------------------------------------- Bernhard Rosenkränzer, May 13 07:34 (ADT) The certificate is no longer mentioned in the error, but Android builds still fail because they can't get needed bits from git.linaro.org. See e.g. this log: https://android-build.linaro.org/jenkins/job/linaro-android_galaxynexus-lin… ---------------------------------------------- Philip Colmer, May 13 05:29 (ADT) This has been resolved. Thank you for bringing it to our attention. ---------------------------------------------- Bernhard Rosenkränzer, May 12 12:55 (ADT) Hi, after the git.linaro.org migration, Android builds are failing. e.g.: https://android-build.linaro.org/jenkins/job/linaro-android_galaxynexus-lin… The problem seems to be with the SSL setup. error: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none while accessing http://git.linaro.org/git-ro/people/kejunzhou/tools_for_pm-qa.git/info/refs fatal: HTTP request failed error: Cannot fetch people/tomgall/libjpeg-turbo/libjpeg-turbo.git error: Cannot fetch tools/powerdebug.git error: Cannot fetch tools/powertop-2.0.git error: Cannot fetch people/kejunzhou/tools_for_pm-qa.git error: Exited sync due to fetch errors ++ infrastructure_error ++ echo 'Caught infrastructure error - finishing build with '\''Not Built'\'' status' Caught infrastructure error - finishing build with 'Not Built' status -------------------------------- This email is a service from IT Services

12 years, 1 month

[IT Services] Update: Android builds failing after git.linaro.org move

by Bernhard Rosenkränzer

##- Please type your reply above this line -## [IT Services] Update: Android builds failing after git.linaro.org move You are registered as a CC on this support request (linaroithelp.zendesk.com/requests/19). Reply to this email to add a comment to the request. ---------------------------------------------- Bernhard Rosenkränzer, May 13 07:34 (ADT) The certificate is no longer mentioned in the error, but Android builds still fail because they can't get needed bits from git.linaro.org. See e.g. this log: https://android-build.linaro.org/jenkins/job/linaro-android_galaxynexus-lin… ---------------------------------------------- Philip Colmer, May 13 05:29 (ADT) This has been resolved. Thank you for bringing it to our attention. ---------------------------------------------- Bernhard Rosenkränzer, May 12 12:55 (ADT) Hi, after the git.linaro.org migration, Android builds are failing. e.g.: https://android-build.linaro.org/jenkins/job/linaro-android_galaxynexus-lin… The problem seems to be with the SSL setup. error: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none while accessing http://git.linaro.org/git-ro/people/kejunzhou/tools_for_pm-qa.git/info/refs fatal: HTTP request failed error: Cannot fetch people/tomgall/libjpeg-turbo/libjpeg-turbo.git error: Cannot fetch tools/powerdebug.git error: Cannot fetch tools/powertop-2.0.git error: Cannot fetch people/kejunzhou/tools_for_pm-qa.git error: Exited sync due to fetch errors ++ infrastructure_error ++ echo 'Caught infrastructure error - finishing build with '\''Not Built'\'' status' Caught infrastructure error - finishing build with 'Not Built' status -------------------------------- This email is a service from IT Services

12 years, 1 month

[IT Services] Update: Android builds failing after git.linaro.org move

by Philip Colmer

12 years, 1 month

Android builds failing after git.linaro.org move

by Bernhard Rosenkränzer

Hi, after the git.linaro.org migration, Android builds are failing. e.g.: https://android-build.linaro.org/jenkins/job/linaro-android_galaxynexus-lin… The problem seems to be with the SSL setup. error: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none while accessing http://git.linaro.org/git-ro/people/kejunzhou/tools_for_pm-qa.git/info/refs fatal: HTTP request failed error: Cannot fetch people/tomgall/libjpeg-turbo/libjpeg-turbo.git error: Cannot fetch tools/powerdebug.git error: Cannot fetch tools/powertop-2.0.git error: Cannot fetch people/kejunzhou/tools_for_pm-qa.git error: Exited sync due to fetch errors ++ infrastructure_error ++ echo 'Caught infrastructure error - finishing build with '\''Not Built'\'' status' Caught infrastructure error - finishing build with 'Not Built' status

12 years, 1 month

Fwd: mode change on android

by Bernhard Rosenkränzer

Forwarding message from Amber, since the list is post-by-subscribers-only ---------- Forwarded message ---------- Hi all, After speaking with Bero, we decided this question from Zendesk would be better asked here on this mailing list. The original requester has been informed that the question has been moved to this mailing list on their behalf. Thank you in advance for any help or advice you all can give the original requester Below is the question in full: hi, I am using Android on an STB my problem is to change frame buffer timimg mode with a minimum impact on the graphic interface. Now the easy solution I use is to start stop the whole thing. it takes around 15s , What would be the safest way to do it, Am thinking changing the mode with fbset and the GUI application would adapt itself to the new resolution without stopping the starting the whole thing? This is a common use case in a STB or a TV. -- Amber Graner Community and Social Media Manager Linaro.org <http://www.linaro.org/>* **│ *Open source software for ARM SoCs* *** Follow *Linaro: *Facebook <http://www.facebook.com/pages/Linaro> | Twitter<http://twitter.com/#%21/linaroorg> | Blog <http://www.linaro.org/linaro-blog/> *+1.828.582.9469* cell *+1.828.395.1049* office irc: akgraner amber.graner(a)linaro.org (email and Google chat)

12 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-android