Linaro-android

linaro-android@lists.linaro.org

1072 discussions

Daily builds are failing during repo init

by Vishal Bhoj

Hi, Android builds are failing in repo init phase. I have opened a bug for the same: https://bugs.launchpad.net/bugs/1181907 repo init and sync worked for me locally. Can someone please have a look. Regards, Vishal

12 years, 1 month

转发: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2

by ryan3216＠tom.com

Hi Vishal, I get pandaboard.img.bz2 from the url http://snapshots.linaro.org/android/~linaro-android-member-ti/panda-linaro/2 96/pandaboard.img.bz2, that come from the page you tell me to try again. I get any error log and I attached to the annex . It`s same with linera 13.04 release. I use the follow cmd : ryan@ubuntu:/workdir$sudo bzip2 -d pandaboard.img.bz2 ryan@ubuntu:/workdir$sudo dd if=pandaboard.img of=/dev/sdb bs=4M 512+0 records in 512+0 records out 2147483648 bytes (2.1 GB) copied, 483.417 s, 4.4 MB/s ryan@ubuntu:/workdir$ sudo sync Where must have a problem. Please guide me . Best Regards 发件人: linaro-android-bounces(a)lists.linaro.org [mailto:linaro-android-bounces@lists.linaro.org] 代表 Vishal Bhoj 发送时间: 2013年5月17日 18:41 收件人: liangqin(a)multicorewareinc.com 抄送: linaro-android 主题: Re: 答复: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2 That is the right url. Can you please try it again: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/ On 17 May 2013 14:18, <liangqin(a)multicorewareinc.com> wrote: Hi Vishal Bhoj, Thank you for your reply, but that url can`t open. Is that url different from others ? Best regards. 发件人: Vishal Bhoj [mailto:vishal.bhoj@linaro.org] 发送时间: 2013年5月17日 16:36 收件人: liangqin(a)multicorewareinc.com 抄送: linaro-android 主题: Re: panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2 Hi, Please pic the image from this build: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina ro/ The above build is the stable build for panda. On 17 May 2013 14:00, <liangqin(a)multicorewareinc.com> wrote: Hi all, I choose version is the Release 13.02RC3 according follow: https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR nWmgwbVhTR0E#gid=18 . The release address as follow : https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc 47-tilt-tracking-blob/#build=196 I download panda image is pandaboard.img.bz2 as http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t ilt-tracking-blob/196/pandaboard.img.bz2 when it is booting, the follow message were showed, I add it to the e-mail attachments. Does linaro support Omap4460 pandaboard es VB2 ? please guide me. Ryan 05/17/2013 _______________________________________________ linaro-android mailing list linaro-android(a)lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android

12 years, 1 month

Android build status "NOT_BUILT" due to infrastructure issue

by Soumya Basak

Hi, Linaro-android builds are "NOT_BUILT" : https://android-build.linaro.org/jenkins/job/linaro-android-member-ti_panda… the problem seems to be with infrastructure : fatal: branch 'stable' has not been signed ++ infrastructure_error ++ echo 'Caught infrastructure error - finishing build with '\''Not Built'\'' status' Caught infrastructure error - finishing build with 'Not Built' status ++ exit 123 Build step 'Execute shell and set build status' changed build result to NOT_BUILT Build step 'Execute shell and set build status' marked build as failure Archiving artifacts Recording fingerprints Email was triggered for: Not Built Sending email for trigger: Not Built Sending email to: linaro-android-builders(a)linaro.org Finished: NOT_BUILT would you please look into the issue for our QA weekly tests. Thanks & Regards Soumya Basak.

12 years, 1 month

http://android.git.linaro.org/git-ro is out of sync with the actual git tree

by Bernhard Rosenkränzer

Hi, Just in case this fixes itself by a sync process or something, this was seen on 2013/05/17 23:46 UTC and has been going on for at least a few hours (I've just spent quite some time trying to figure out why a fix I made didn't work in android-build -- turns out it never made it there because the http checkout is out of sync): git clone ssh:// bero@android.git.linaro.org:29418/toolchain/binutils-current.git cd binutils-current git checkout -b linaro-2.23.52.0.2 origin/linaro-2.23.52.0.2 git log Last commit is 097e128c18b6d7f1a26418518b66b5d206dd357d (as expected) But: git clone http://android.git.linaro.org/git-ro/toolchain/binutils-current.git cd binutils-current git checkout -b linaro-2.23.52.0.2 origin/linaro-2.23.52.0.2 git log Last commit is 6a6083aa79537708cd16551dc803315412f98e21 (2 commits behind the git repository). ttyl bero

12 years, 1 month

(review.)android.git.linaro.org has moved!

by Philip Colmer

I'm pleased to announce that the migration of the Android git server from Canonical to EC2 has been successfully completed. My thanks to Milo for his significant help with this endeavour. If you don't sign in to review.android.git.linaro.org, you can ignore the rest of this email. ***** Please read carefully! ***** As explained previously, you will need to log in with your Launchpad OpenID and then associated your identity with your Linaro Login OpenID if you want to keep the same account on the server at the end of the month when we turn off Launchpad OpenID authentication. Here are the steps you need to take: 1. Go to https://login.linaro.org:8443/openidserver. If you are asked to log in, please enter your EMAIL ADDRESS and your Linaro Login password. 2. The web page should now display a URL of the format https://login.linaro.org:8443/openidserver/users/<your email address>. Make a note of that, please. 3. Go to http://review.android.git.linaro.org/. Sign in with your Launchpad ID. (https://launchpad.net/~<launchpad ID>) 4. When you have signed in, click on the "Settings" link in the top right corner of the web page. 5. Click on the Identities link on the left hand side of the web page. 6. Click on "Link Another Identity". 7. Enter the URL you noted from step 2 and click on "Link Identity". 8. If your web browser session from step 2 has expired, you will be asked to log in again - enter the same information you entered at step 1. 9. If your web browser session has not expired, or once you have logged in, you will see a web page with the title "OpenID Verification". On the right hand side, click on Allow Always. The above steps only need to be done once, and needs to be done BEFORE THE END OF MAY! If you don't follow these steps by then, you will end up with a new account when you next sign in on the server. Between now and the end of May, you will need to paste your Linaro Login OpenID URL so you may want to keep a copy of that safe somewhere. After May, we will reconfigure the server so that *only* Linaro Login OpenID is supported, and clicking on "Sign In" will automatically authenticate you with that service. If you have any problems signing in to review.android.git.linaro.org, please send an email to its(a)linaro.org with as many details as possible. Thanks. Regards Philip

12 years, 1 month

Re: Kernel Source 3.2.0+ download.Fwd: Panda Board Android upgrade 4.2.2

by Vishal Bhoj

Please post your mails to public mailing list. You can find the sources to the kernel and the exact commit by looking into entry for the kernel in the pinned manifest: https://snapshots.linaro.org/android/~linaro-android-member-ti/panda-linaro… The kernel source is available here: http://android.git.linaro.org/gitweb?p=kernel/panda.git;a=shortlog;h=refs/h… On 17 May 2013 15:18, Denny G <dennygeorgeus(a)gmail.com> wrote: > Hi Vishal, Fathi, > > I flashed the MMC card and could see the Android version 4.2.2 up on my > Panda board with the kernel 3.2.0+ as shown in your excel sheet. > > https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0Mn… row=18,column=AH. > > I am trying to compile the kernel module for the given kernel version (ie > 3.2.0+) and dont see the source in the linux.org. I was wondering if it > is customised kernel from your side. If yes where can I download it? > > BTW previously I compiled my kernel module with kernel source 3.2.0 and > get kernel mismatch error! > > Regards, > Denny G > > On 17 May 2013 15:05, Soumya Basak <soumya.basak(a)linaro.org> wrote: > >> Hi Denny, >> I am not pretty sure about this, I usually followed this build page for >> release critical testing and validate results. >> https://releases.linaro.org/13.04/android/panda >> >> for more info you can mail Vishal bhoj (vishal.bhoj(a)linaro.org), Fathi >> Boudra (fathi.boudra(a)linaro.org) and IRC channel #linaro-android. >> >> Thank You! >> Best Regards >> Soumya Basak >> >> >> On 17 May 2013 14:50, Denny G <dennygeorgeus(a)gmail.com> wrote: >> >>> Hello Soumya, >>> >>> Where can I download your 3.2.0+ kernel used in RC 13.04 ? I hope this >>> 3.2.0+ is customised by Linaro, as I dont see any release by this name. >>> I compiled a kernel module for 3.2.0 and was getting kernel mismatch >>> error. >>> >>> Regards, >>> Denny >>> >>> >>> >>> ---------- Forwarded message ---------- >>> From: Denny G <dennygeorgeus(a)gmail.com> >>> Date: 17 May 2013 13:09 >>> Subject: Re: Panda Board Android upgrade 4.2.2 >>> To: Soumya Basak <soumya.basak(a)linaro.org> >>> >>> >>> Hello Soumya, >>> >>> Which is the kernel you are using on the RC 13.04. I see on 'uname -r' >>> as 3.2.0+. >>> I compiled a kernel module for 3.2.0 and was getting kernel mismatch >>> error. >>> >>> >>> Regards, >>> Denny >>> >>> >>> >>> >>> On 13 May 2013 16:56, Denny G <dennygeorgeus(a)gmail.com> wrote: >>> >>>> Thanks Soumya, I'll take the latest 13.04 as of now. >>>> >>>> Regards, >>>> Denny >>>> >>>> >>>> On 13 May 2013 15:52, Soumya Basak <soumya.basak(a)linaro.org> wrote: >>>> >>>>> Hi Denny, >>>>> >>>>> any rc builds are stable. but humbly suggest to use the latest rc >>>>> release (13.04). and keep an eyes on our result spreadsheet, >>>>> >>>>> https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… >>>>> >>>>> Thank You! >>>>> Best Regards >>>>> Soumya Basak >>>>> >>>>> >>>>> On 13 May 2013 14:02, Denny G <dennygeorgeus(a)gmail.com> wrote: >>>>> >>>>>> Hello Soumya, >>>>>> >>>>>> I wanted to upgrade my Panda board to 4.2.2 >>>>>> Which build is more stable ? 13.02, 13.03 or 13.04? >>>>>> Or should I take any other better build? >>>>>> >>>>>> Regards, >>>>>> Denny G >>>>>> >>>>> >>>>> >>>> >>> >>> >> >

12 years, 1 month

panda-jb-gcc47-tilt-tracking-blob not Suitable pandaboard es omap4460 vB2

by liangqin＠multicorewareinc.com

Hi all, I choose version is the Release 13.02RC3 according follow: https://docs.google.com/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd3pZazdaRUU0MnR nWmgwbVhTR0E#gid=18 . The release address as follow : https://android-build.linaro.org/builds/~linaro-android-archive/panda-jb-gcc 47-tilt-tracking-blob/#build=196 I download panda image is pandaboard.img.bz2 as http://snapshots.linaro.org/android/~linaro-android-archive/panda-jb-gcc47-t ilt-tracking-blob/196/pandaboard.img.bz2 when it is booting, the follow message were showed, I add it to the e-mail attachments. Does linaro support Omap4460 pandaboard es VB2 ? please guide me. Ryan 05/17/2013

12 years, 1 month

Reminder: (review.)android.git.linaro.org is moving today!

by Philip Colmer

This is a brief reminder that (review.)android.git.linaro.org will be unavailable from 2pm GMT+1 today while the Infrastructure and IT teams finish the work required to move the server from Canonical to Amazon EC2. There will be a further email sent after the work is completed. Regards Philip

12 years, 1 month

Re: which version can support omap4460 pandaboard ES ?

by Fathi Boudra

Hi, the mailing list is more appropriate. On 17 May 2013 08:24, <liangqin(a)multicorewareinc.com> wrote: > Hi Fathi Boudra, > > Could you please tell me which linaro version support omap4460 > pandaboard ES ? > > I try 13.03 it can`t work fine on pandboard es, according > https://releases.linaro.org/13.03/android/panda. > > Does linera support it? I began to wonder. > > Can you guide me ? The releases are tested. Please make sure you followed the instructions available on the release page, especially the part about installing graphics libraries. TI-Panda 4460 with Linaro android jellybean 4.2.2 (Column: AD ) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… Looks good, Boot to GUI, wifi is working, Suspend-resume test is working, download-install.apk is working, 0xbench is working, youtube and vid playback working fine. Cheers, Fathi

12 years, 1 month

test result summary of calender week 20,for Linaro android jellybean

by Soumya Basak

Hi, Here is the test result summary of Linaro android jellybean builds on different boards. [1] TI Panda 4430; [2] TI Panda 4460; [3] ST Ericsson Snowball; [5] ARM Versatile Express A9; synopsis: test conducted in this week is only for those test cases which are marked [RC] on our spreadsheet. [1] TI Panda 4430 + Linaro Android jellybean (Column : AK) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… it keeps exactly same result as compare to last week tests. No significant change or no new bug in this week release. [2] TI Panda 4460 + Linaro Android jellybean (Column: AK) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… it keeps exactly same result as past few weeks test. [3] ST Ericsson Snowball + Linaro Android jellybean (Column: AJ) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N… keeps exactly same results. [5] ARM Versatile Express A9; + Linaro android jellybean (Column: AJ) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… kernel_version is changed to 3.9.1-00199-g6428ef6, toolchain_version is 4.7-2013.04, other keeps exactly same as last week test. Thank You! Best Regards Soumya Basak.

12 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-android