Linaro-android

linaro-android@lists.linaro.org

1073 discussions

by Milo Casagrande

Hello everyone, the Infrastructure team is going to perform a small update of Android Build frontend today at 12UTC. The deployment shouldn't take more than 10 minutes. Only the frontend will be affected. If the downtime will cause you significant problems, please get in touch with us. Thanks. -- Milo Casagrande Infrastructure Engineer Linaro.org <www.linaro.org> │ Open source software for ARM SoCs

12 years, 10 months

TI display driver HAL in Linaro 12.07

by S.Sharavana Ram Kumar

Hi, I have the Android ICS source code from Linaro 12.07 release. I am interested in seeing the Display driver's HAL for the OMAP4430 (Pandaboard) Is the code under hardware/ti/omap4xxx/hwc/ correct place to look for the display system's HAL code for omap44xx boards? Does the TI omap44xx HAL hardware composer uses DRI/DRM interface to drive the Display? Does it uses the omapdrm driver in the linux kernel (drivers/staging/omapdrm/)? Please provide some clearity on this. Regards, S.Sharavana

12 years, 10 months

Re: Daily Dashboard build stop since 30 November 2012

by Alexander Sack

thanks Soumya... keep on notifying us about these things please :) Next time include the build team that is doing the builds as they are usually the folks breaking stuff and should drive the resolution once its known (CCed public android list now) On Tue, Dec 4, 2012 at 12:39 PM, Soumya Basak <soumya.basak(a)linaro.org> wrote: > Hi Andy, > would you please have a look at our Daily Dashboard page, > > http://validation.linaro.org/lava-server/dashboard/image-reports/panda-jb-g… > http://validation.linaro.org/lava-server/dashboard/image-reports/snowball-j… > http://validation.linaro.org/lava-server/dashboard/image-reports/snowball-j… > > Image report is stooped since 30 November 2012. also the boot test failure > from last few builds. > would you please update the issue, for our weekly test cases. > > Thanks > Soumya Basak. >

12 years, 11 months

Re: [pandaboard] Pandaboard SGX drivers for Linaro 12.07 Android ICS release (3.4 kernel)

by Zach Pfeffer

On 29 November 2012 08:13, shan t <ez.shan152(a)gmail.com> wrote: > Hi Pervushin, > Thank you for the information, is it same case for Android ICS (3.4 kernel) > also ? > > I am planning to migrate the SGX drivers from 3.2 kernel ICS to 3.4 kernel > ICS. Could you please comment on this, feasibility & complexity! Shanmugam, Feel free to take a look through: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… Its a sheet with the test results of all the panda builds we've done. Our last ICS build with SGX graphics enablement for ICS looks like: https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc46-til… > Thanks, > Shanmugam T > > > On Thu, Nov 29, 2012 at 7:17 PM, dmitry pervushin <d-pervushin(a)ti.com> > wrote: >> >> On 11/29/2012 05:57 AM, shan_au wrote: >>> >>> Hi, >>> I am new to this Android porting activity. >>> Linaro Android ICS release 12.07 doesn't have Pandaboard SGX540 drivers. >>> Any idea why this has been dropped from the 3.4 kernel based 12.07 ICS >>> release. Same is present in 3.2 kernel based ICS release. >>> >>> My current Android Linaro kernel 3.4 doesn't have SGX drivers. Please >>> let me know the feasibility of migrating 3.2 kernel ICS graphics(SGX) >>> drivers to 3.4 kernel and making ICS & graphics up on Pandaboard. >>> >>> Here is the Linaro release notes... which talks about missing drivers. >>> (section:3.1.1) >>> https://wiki.linaro.org/Cycles/1207/Release#Android >> >> There is no drivers for Android JB... yet. But there are some people that >> works on it, so soon (in few weeks, probably) you - and the community as >> well - could get these drivers. >> >> >>> Please guide me method to migrate the drivers! >>> >>> Thanks, >>> Shanmugam T >> >> >> >> -- >> Sincerely yours, >> dmitry pervushin > > -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

12 years, 11 months

4.2.1

by Bernhard Rosenkränzer

Hi, as some may have noticed, 4.2.1 was quietly released. Since the changes (other than adding Nexus 4 support) are really minor (I'm surprised they call this 4.2.1 instead of just tagging 4.2_r2), I've updated all builds, and just to make things more interesting, switched them to the 12.12 daily toolchain builds while at it. ttyl bero

12 years, 11 months

Summary report for 12.11 android release builds.

by Soumya Basak

*Hi,* *12.11 Test Summary. Here is test result summary for Linaro Android platform on following boards:* *Android jb Release* *1.TI Panda Board 4430.* *2.TI Panda Board 4460.* *3.ST-Ericsson Snowball.* *4.Samsung Origen.* 5. *Vexpress A9* *Synopsis:* No major glitch and new bug found compare to the Last few test. Android build images for Panda4430, Panda4460, Snowball, and Origen board . summary report as follows. - Panda 4430 and 4460 Android JB build image is tested with new kernel version 3.2.0+. Apart from no major glitch and new bugs is observed compare to the last few weeks release images. - ST Ericsson Snowball is work fine for Android jb build images with kernel version 3.4.0+ . The bug report is almost same as previous release. SD Card not detected from Gallery, video playback fails. Apart from that No major difference is observed compare to Past few release. - Origen Android jb builds with upgrade kernel version 3.7.0 , no new bugs and glitch found as like past few test images ethernet, wifi, BT, email apps, Suspend resume is not working. - Vexpress A9 same as previous builds 1. *Panda 4430/4460 Android Jelly Bean (Panda 4430 Column T/ Panda 4460 Column T)* https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… Features: for panda 4430 sd-mmc – m, wifi , suspend-resume – wm, glmark2 – dwm, speach recorder, powertop, youtube – wm, hwvideo – wm, audio – wm, hwaudio – m, angrybirds – wm, bluetooth – wm, usb-camera – wm, is not working. Powertop is working, glmark 2 is working with score 103. For panda 4460 : suspend-resume, wifi fail to connect, 0xbench, glmark, hwgfx is not finished compleately for 4460, audio, hwvideo, BT, video playback failed, download-install apk is never get finished. Powertop is working, and “Unfortunatuly Gallery has stoped ” message is not appear after boot. *Note: kernel version is 3.2.0+ Android version is 4.2* toolchain version : is upgraded to (gcc version 4.7.3 20121106 (prerelease) (Linaro GCC 4.7-2012.11) ). 2. *Snowball Android Jelly Bean** **(column Q)* https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N… Features: the content of SD-card is not detected from Gallery, df will not show /mnt/sdcard. Playback of Video fails. Phone apps is missing Youtube is not working, speach recorder, BT, suspend resume is not working, 0xbench and hwgfx is not successfully compleated. *Note: kernel version is same 3.4.0+ , toolchain version is gcc version 4.7.3 20121001 (prerelease) (Linaro GCC 4.7-2012.10) ), and Android version : 4.2* *toolchain version is upgraded to (gcc version 4.7.3 20121106 (prerelease) (Linaro GCC 4.7-2012.11) ) .* 3. *Origen Android Jelly Bean** **(column L)* https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDRDV… Features: SD card is not mount from gallery and from “df ” command, wifi, BT, usb-camera, youtube, wifi, vid-play-back, email apps, speach-recorder, download-install-apk, is not working. *Note: the kernel version is upgrade to 3.7.0-rc6-g0974d1e, toolchain version is upgraded to 4.7-2012.11 and android version is 4.2* 1. *V-express A9(column Q)* * https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… * Features: suspend-resume, glmark2, youtube, adb-dwm, usb-camera, calender apps is not working. Device tree is not present from the last few builds. *Note: kernel version is same as 3.7.0-rc6-00610-g110910f, toolchain version 4.7-2012.11, and android version: 4.1.2.* *Thanks & Regards* Soumya Basak <soumya.basak*(a)linaro.org <amit.khare(a)linaro.org>*> QA Services - Linaro Platform *http://wiki.linaro.org/Platform/QA*

12 years, 11 months

[PATCH] ARM: mm: Allow an empty PMD in alloc_init_pte()

by Jon Medhurst (Tixy)

The Android patch titled "ARM: allow the kernel text section to be made read-only" modifies alloc_init_pte() and adds a BUG_ON to detect the case where a section mapping is being overwritten. However the test doesn't allow for the legitimate case where the PMD is empty, as can happen for kernels built with CONFIG_ARM_LPAE. So extend the test to allow this. Signed-off-by: Jon Medhurst <tixy(a)linaro.org> --- arch/arm/mm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9eb7a4e..c35bbda 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -587,7 +587,7 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, pte_t *pte = start_pte + pte_index(addr); /* If replacing a section mapping, the whole section must be replaced */ - BUG_ON(pmd_bad(*pmd) && ((addr | end) & ~PMD_MASK)); + BUG_ON(!pmd_none(*pmd) && pmd_bad(*pmd) && ((addr | end) & ~PMD_MASK)); do { set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0); -- 1.7.10.4

12 years, 11 months

Android config fragment updated for Android 4.2

by Jon Medhurst (Tixy)

Hi Andrey As part of the efforts to get Android 4.2 working I have added CONFIG_FUSE_FS to the android.conf in configs-core-tracking. Could you please consider pulling this into linux-linaro? Such a change should be innocuous and I've built and booted a vexpress Android kernel with this change. I don't know if other Android builds are using config fragments or have their own defconfig, so perhaps they are also going to need updating...? -- Tixy

12 years, 11 months

bandaid: repo sync on hackbox needs modern git

by Alexander Sack

Hi, seems we got recent issues because git is too "old" on hackbox. Here two ways to workaround for now: 1. use precise chroot to get the source: $ schroot -c precise $ repo ... 2. use git 1.8.0 that i installed in /home/linaro/local/bin: $ export PATH=/home/linaro/local/bin/:$PATH $ repo ... I have filed an RT ticket for changing PATH order on hackbox so that 2. will be the default whenever you log in. e.g. might be that from monday on you don't need to do anything special anymore. Let me know if you still have issues. -- Alexander Sack Technical Director, Linaro Platform Teams http://www.linaro.org | Open source software for ARM SoCs http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

12 years, 11 months

Test result summary for 12.11RC3 release

by Soumya Basak

*Hi,* *12.11RC3 Test Summary. Here is test result summary for Linaro Android platform on following boards:* *Android jb Release* *1.TI Panda Board 4430.* *2.TI Panda Board 4460.* *3.ST-Ericsson Snowball.* *4.Samsung Origen.* *Synopsis:* No major glitch and new bug found compare to the Last few test. Android build images for Panda4430, Panda4460, Snowball, and Origen board . summary report as follows. - Panda 4430 and 4460 Android JB build image is tested with new kernel version 3.4.0-gc9c93b6. Apart from no major glitch and new bugs is observed compare to the last few weeks release images. - ST Ericsson Snowball is work fine for Android jb build images with kernel version 3.4.0+ . The bug report is almost same as previous release. SD Card not detected from Gallery, video playback fails. Apart from that No major difference is observed compare to Past few release. - Origen Android jb builds with new kernel version 3.7.0 , no new bugs and glitch found as like past few test images ethernet, wifi, BT, email apps, Suspend resume is not working. 1. *Panda 4430/4460 Android Jelly Bean** **(Panda 4430 Column S/ Panda 4460 Column S)* https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… Features: for panda 4430 sd-mmc – m, wifi , suspend-resume – wm, glmark2 – dwm, speach recorder, powertop, youtube – wm, hwvideo – wm, audio – wm, hwaudio – m, angrybirds – wm, bluetooth – wm, usb-camera – wm, is not working. For panda 4460 : suspend-resume, wifi fail to connect, 0xbench, glmark, hwgfx is not finished compleately for 4460, audio, hwvideo, BT, video playback failed, download-install apk is never get finished. *Note: kernel version is 3.4.0-gc9c93b6 from 12.11RC1 release. Android version is 4.1.2.* 2. *Snowball Android Jelly Bean** **(column P)* https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N… Features: the content of SD-card is not detected from Gallery, df will not show /mnt/sdcard. Playback of Video fails. Youtube is not working, speach recorder, BT, suspend resume is not working. *Note: kernel version is same 3.4.0+ , toolchain version is gcc version 4.7.3 20121001 (prerelease) (Linaro GCC 4.7-2012.10) ), and Android version : 4.1.2* 3. *Origen Android Jelly Bean** **(column K)* https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDRDV… Features: wifi, BT, usb-camera, secondary-vid-out, youtube, wifi, vid-play-back, email apps, speach-recorder, download-install-apk, is not working. *Note: the kernel version is upgrade to 3.7.0-rc4-00504-g0ae2593, toolchain version is 4.7-2012.10 and android version is 4.1.2.* *Thanks & Regards* Soumya Basak <soumya.basak(a)linaro.org> QA Services - Linaro Platform http://wiki.linaro.org/Platform/QA

12 years, 11 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-android