Linaro-android

linaro-android@lists.linaro.org

1073 discussions

4.1.2

by Bernhard Rosenkränzer

Hi, 4.1.2 update is "done" as in "we have a linaro_android_4.1.2 branch completely rebased to android-4.1.2_r1, and all stuff we aren't modifying is pulled from android-4.1.2_r1". I've done a Galaxy Nexus and a Nexus 7 build with very mixed results. Galaxy Nexus boots up fine, but doesn't find the SIM card anymore, looks like it has trouble talking to the lower level firmware. As long as you don't need any phone functionality, it works perfectly. Nexus 7 boots to the bootup logo once, then reboots, and gets stuck in the bootloader screen. I'm assuming both problems are caused by the binary blobs in one way or another (got to check the original firmware for any additional blobs we need to add to the merge scripts...). Since Galaxy Nexus (minus phone) works well, I'm fairly sure the baseline is ok - and even if there's some problem with the phone layer, our other builds shouldn't be affected by it simply because they aren't phones -- so I'm thinking it's safe to move the builds over to 4.1.2. I'm switching all builds over now, if for some reason a build needs to be switched back, it's just a matter of changing the manifest branch back from linaro_android_4.1.2 to linaro_android_4.1.1. ttyl bero

13 years, 2 months

Fwd: Ethernet with proxy not working

by shakti tiwari

Adding linaro-android community -------- Original Message -------- Subject: Ethernet with proxy not working Date: Fri, 05 Oct 2012 17:16:04 +0530 From: shakti tiwari <shakti.tiwari(a)ti.com> To: kejun.zhou(a)linaro.org Hi I am using your ECM patch for Ethernet in jelly bean is working fine, but when i am using Internet over proxy is not working. Is any issue with proxy ,can you give any hint on this issue. Regards, shakti tiwari

13 years, 2 months

[ANN] android-build downtime for Jenkins EC2 plugin upgrade

by Paul Sokolovsky

Hello, We're way behind our Jenkins EC2 plugin version (1.14 vs latest 1.17). The latest plugin versions bring lot more options to control EC2 behavior, including those requested by EC2 infrastructure stakeholder as critical: https://bugs.launchpad.net/linaro-aws-tools/+bug/1045850 The upgrade is scheduled for 8:30UTC today. Estimated downtime is 30min, but there may be further adjustments required throughout the day. Please let me know if there're any issues, via mail or IRC. Thanks, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 2 months

2012-10-10 Android Platform Team Meeting Agenda Posted

by Zach Pfeffer

Please take a look at: https://wiki.linaro.org/Platform/Android/Meetings/2012-10-10 Feel free to add to the agenda and join us in #linaro-meeting on irc.freenode.net at 13:00 UTC on 2012/10/10. -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 2 months

kernel sources for Linaro AOSP builds

by Sagar Shinde

Hi, I was using this AOSP ICS build for Panda created by Linaro http://releases.linaro.org/12.07/android/images/panda-master-gcc44-aosp-sta… This Linaro AOSP ICS build does not seem to have the usb networking issue (ethernet very slow in AOSP ICS) that I have been trying to fix for few weeks now. So probably kernel in this AOSP ICS image created by Linaro has some fix for it. I checked the pinned-manifest.xml for which kernel it uses <project name="kernel/omap" revision=" 52f476403350050beb0dff135a55c06c9e7a82a9"> So as I understand its above revision* checked* out from git:// android.git.linaro.org/kernel/omap. I tried to download these sources, but I did not find any difference in the kernel sources I downloaded from AOSP git. (Both also have seem to have same revision!) Also the kernel config file seem to be the same. I tried to build this kernel and use in AOSP ICS and again I face same usb-ethernet networking issue. So I am really curious to find the kernel sources used to build the kernel in the AOSP ICS images created by Linaro, as I think that the slow ethernet issue arises sue to some bug in usb controller in kernel. Please could you help with some pointers to find these sources? Thanks for your kind support. BR Sagar

13 years, 2 months

Re: [Omapandroid-discussion] smsc95xx: download ok, upload hangs

by Zach Pfeffer

On 29 June 2012 10:55, Émeric Vigier <emeric.vigier(a)savoirfairelinux.com> wrote: > Hi, > > I am not 100% sure but it seems my smsc95xx is unable to wake up the CPU while it is in WFI. > I have verified that my OMAP4430 constantly enters WFI. Note that sleep states are disabled. > USB mouse and keyboard events wake it up properly. eth0 RX seems to wake it up, but eth0 TX does not... > What could be possibly wrong in my config then? usbnet.c only creates softirq to submit URB. No HW irq. > > How can I make smsc95xx trigger an interrupt (ehci_hcd:usb1) while transferring data? > Do you know? I don't know. Including linaro-android and pandaboard. > Emeric > > ----- Mail original ----- >> De: "Émeric Vigier" <emeric.vigier(a)savoirfairelinux.com> >> À: "Zach Pfeffer" <zach.pfeffer(a)linaro.org> >> Cc: "Vikram Pandita" <vikram.pandita(a)ti.com>, omapandroid-discussion(a)gforge.ti.com >> Envoyé: Jeudi 28 Juin 2012 16:04:31 >> Objet: Re: [Omapandroid-discussion] smsc95xx: download ok, upload hangs >> >> I tried 4AI.1.4-P1 kernel this morning. The panda_defconfig did not >> compiled out of the box: >> arch/arm/mach-omap2/temp_sensor_device.c:38: undefined reference to >> `omap_temp_sensor_idle' >> I disabled CONFIG_OMAP_TEMP_SENSOR and CONFIG_OMAP4_DIE_TEMP_SENSOR. >> It seems that there are not supported on omap4430 anyway... >> But kernel panics short after init, with my Android images. And I am >> not really into investigating this panic. >> >> Compiling my current kernel with gcc-4.6 (provided by google android) >> did not change the behavior. >> >> I made more tests though. My test setup is now as follows: >> On the pandaboard I run: >> # nc -l -p 1032 < /dev/zero & >> On my host computer (connected to the same network), I run: >> # nc 192.168.50.107 1032 > /dev/null >> I can see with nethogs that TX is stalled as I got "nc [...] 0KB/sec" >> >> I tried to change mtu, from 1500 to 512, no real improvement. >> >> here is a list of my usb devices: >> >> # cat /d/usb/devices >> >> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3 >> B: Alloc= 0/800 us ( 0%), #Int= 3, #Iso= 0 >> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 >> P: Vendor=1d6b ProdID=0002 Rev= 3.00 >> S: Manufacturer=Linux 3.0.8-g2562c68-dirty ehci_hcd >> S: Product=OMAP-EHCI Host Controller >> S: SerialNumber=ehci-omap.0 >> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA >> I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub >> E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms >> >> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 5 >> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1 >> P: Vendor=0424 ProdID=9514 Rev= 1.00 >> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA >> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub >> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms >> I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub >> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms >> >> T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 >> D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 >> P: Vendor=0424 ProdID=ec00 Rev= 1.00 >> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA >> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff >> Driver=smsc95xx >> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms >> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms >> E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=1ms >> >> T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=1.5 MxCh= 0 >> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 >> P: Vendor=04b3 ProdID=3025 Rev= 1.02 >> S: Manufacturer=CHICONY >> S: Product=USB NetVista Full Width Keyboard >> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA >> I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid >> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms >> >> T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#= 6 Spd=12 MxCh= 0 >> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 >> P: Vendor=066b ProdID=400b Rev= 1.01 >> S: Manufacturer=LINKSYS Inc >> S: Product=LINKSYS USB Adapter >> S: SerialNumber=9b1fa5 >> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=156mA >> I:* If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=pegasus >> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms >> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms >> E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=1ms >> >> We can see the smsc9514 chipset which is causing me so much pain. >> Also I compiled the pegasus driver to support an external Linksys >> device. This device ethernet behaves just fine as eth1. I noticed >> that MxPS (MaxPacketSizes) and Cls (Class) are different on the two >> ethernet devices. But I don't think this is the cause of my problem. >> >> When I stress the cpu: >> # stress -c 1 >> TX is resumed and speed increases to ~20KBps. >> This is strange, because I remember having tested with "stress -c 2" >> before, without seeing any improvement. My setup is probably >> different now... >> >> Something must be wrong with the wakeonlan capability of the chipset. >> I checked register 0x20, smsc95xx.h defines: >> >> #define PM_CTRL (0x20) >> #define PM_CTL_DEV_RDY_ (0x00000080) >> #define PM_CTL_SUS_MODE_ (0x00000060) >> #define PM_CTL_SUS_MODE_0 (0x00000000) >> #define PM_CTL_SUS_MODE_1 (0x00000020) >> #define PM_CTL_SUS_MODE_2 (0x00000060) >> #define PM_CTL_PHY_RST_ (0x00000010) >> #define PM_CTL_WOL_EN_ (0x00000008) >> #define PM_CTL_ED_EN_ (0x00000004) >> #define PM_CTL_WUPS_ (0x00000003) >> #define PM_CTL_WUPS_NO_ (0x00000000) >> #define PM_CTL_WUPS_ED_ (0x00000001) >> #define PM_CTL_WUPS_WOL_ (0x00000002) >> #define PM_CTL_WUPS_MULTI_ (0x00000003) >> >> # while(true); do ethtool -d eth0 | grep 020: ; sleep 1; done >> 020: 81 00 00 00 00 00 11 01 1f 00 00 1f a0 30 f8 00 >> 020: 81 00 00 00 00 00 11 01 1f 00 00 1f a0 30 f8 00 >> 020: 81 00 00 00 02 00 11 01 1f 00 00 1f a0 30 f8 00 >> 020: 81 00 00 00 00 00 11 01 1f 00 00 1f a0 30 f8 00 >> 020: 81 00 00 00 00 00 11 01 1f 00 00 1f a0 30 f8 00 >> >> The only register changing is 0x24 which is LED_GPIO_CFG, which >> confirms that my register is correct. >> If I decode correctly, register 0x20 has PM_CTL_WUPS_ED_ and >> PM_CTL_WOL_EN_ set. >> Still lacking register description though... >> >> ethtool returns nothing regarding wakeonlan for eth0: >> >> # ethtool eth0 >> Settings for eth0: >> Supported ports: [ TP MII ] >> Supported link modes: 10baseT/Half 10baseT/Full >> 100baseT/Half 100baseT/Full >> Supports auto-negotiation: Yes >> Advertised link modes: 10baseT/Half 10baseT/Full >> 100baseT/Half 100baseT/Full >> Advertised auto-negotiation: Yes >> Speed: 100Mb/s >> Duplex: Full >> Port: MII >> PHYAD: 1 >> Transceiver: internal >> Auto-negotiation: on >> Current message level: 0x00000007 (7) >> Link detected: yes >> >> Same ethtool result returned with linaro-11.09, whose ethernet works >> like a charm. >> >> I checked again this linaro-11.09. ifconfig eth0 returns an MTU of >> 1488 Bytes, where my faulty android build makes eth0 return 1500 >> Bytes. I believe this 1500 comes from the fact that I apply "9bbf566 >> [PATCH] net: usb: smsc95xx: fix mtu" to my current kernel. >> Changing linaro build's mtu to 1500 does not impact its good >> performance. >> Decreasing the mtu to 512 on my current (and faulty) build does not >> improve the bad performance :-(. >> >> I am starting to go mad. >> >> Regards, >> Emeric >> >> ----- Mail original ----- >> > De: "Émeric Vigier" <emeric.vigier(a)savoirfairelinux.com> >> > À: "Zach Pfeffer" <zach.pfeffer(a)linaro.org> >> > Cc: "Vikram Pandita" <vikram.pandita(a)ti.com>, >> > omapandroid-discussion(a)gforge.ti.com >> > Envoyé: Mercredi 27 Juin 2012 10:06:10 >> > Objet: Re: [Omapandroid-discussion] smsc95xx: download ok, upload >> > hangs >> > >> > Hi Zach, >> > >> > Following Ti's advice >> > (http://e2e.ti.com/support/omap/f/849/p/196732/704452.aspx#704452), >> > I will try >> > http://omapedia.org/wiki/4AI.1.4-P1_OMAP4_Icecream_Sandwich_Release_Notes >> > today. >> > >> > Also I just found out that my current 3.0.8 kernel is compiled with >> > gcc-4.4.3. I am currently trying with gcc-4.6 but I don't feel >> > confident about that. >> > I will try the one you mentioned right after. >> > >> > Thanks, >> > Emeric >> > >> > ----- Mail original ----- >> > > De: "Zach Pfeffer" <zach.pfeffer(a)linaro.org> >> > > À: "Émeric Vigier" <emeric.vigier(a)savoirfairelinux.com> >> > > Cc: "Vikram Pandita" <vikram.pandita(a)ti.com>, >> > > omapandroid-discussion(a)gforge.ti.com >> > > Envoyé: Jeudi 21 Juin 2012 17:34:15 >> > > Objet: Re: [Omapandroid-discussion] smsc95xx: download ok, upload >> > > hangs >> > > >> > > You may want to checkout our omapzoom focused tree: >> > > >> > > https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc47-oma… >> > > >> > > On 21 June 2012 15:20, Émeric Vigier >> > > <emeric.vigier(a)savoirfairelinux.com> wrote: >> > > > Hi Vikram, >> > > > >> > > > I made this diff and came up with few patches in smsc95xx.c and >> > > > usbnet.c (listed below). I applied them to my kernel, but issue >> > > > occurred again. >> > > > >> > > > Because linaro-12.05 uses a 3.4 kernel, and mine is only 3.0.8, >> > > > I >> > > > narrowed down the oldest linaro having ethernet working fine. >> > > > It came up to be linaro-11.09 for panda, which uses 3.1 kernel. >> > > > diff between my kernel and theirs is null for smsc95xx.c and >> > > > usbnet.c. >> > > > >> > > > Then something must be wrong with my config. I will make the >> > > > diff >> > > > of my config and theirs. I have to figure out what's the config >> > > > file linaro uses for 11.09. >> > > > My config file is for Android-4.0.4, quite long (and probably >> > > > faulty): >> > > > http://pastebin.com/2VXemSae >> > > > >> > > > Emeric >> > > > >> > > > ----- Mail original ----- >> > > >> De: "Vikram Pandita" <vikram.pandita(a)ti.com> >> > > >> À: "Émeric Vigier" <emeric.vigier(a)savoirfairelinux.com> >> > > >> Cc: omapandroid-discussion(a)gforge.ti.com >> > > >> Envoyé: Jeudi 21 Juin 2012 14:03:07 >> > > >> Objet: Re: [Omapandroid-discussion] smsc95xx: download ok, >> > > >> upload >> > > >> hangs >> > > >> >> > > >> > test linaro-12.05 ICS release and see ethernet behavior - >> > > >> > PASSED >> > > >> >> > > >> What version kernel does this use if its working? >> > > >> Would be worth a try to take a diff of the smsc driver files >> > > >> between >> > > >> AOSP and this. >> > > >> At least says its not a hw issue. >> > > >> >> > > >> >> > > >> On Thu, Jun 21, 2012 at 8:30 AM, Émeric Vigier >> > > >> <emeric.vigier(a)savoirfairelinux.com> wrote: >> > > >> > >> > > >> > Hi, >> > > >> > >> > > >> > I am experiencing ethernet issue with a pandaboard A3 >> > > >> > (OMAP4430 >> > > >> > rev >> > > >> > 2.2) featuring smsc LAN9514-JZX usbnet chipset. >> > > >> > My panda runs android-4.0.4 with linux kernel 3.0.8 >> > > >> > (android-omap-panda-3.0 branch on >> > > >> > https://android.googlesource.com/kernel/omap.git). >> > > >> > >> > > >> > Receiving ethernet frames work fine, but transmitting them >> > > >> > does >> > > >> > not. The driver/chip seems stuck. >> > > >> > Moving the USB mouse (or USB keyboard key pressed) unlocks >> > > >> > this >> > > >> > behavior and transmission gets resumed for a second or two. >> > > >> > Then >> > > >> > ethernet transmission gets stuck again. >> > > >> > >> > > >> > Recently, I cherry-picked dozen of usbnet and smsc95xx >> > > >> > patches, >> > > >> > and >> > > >> > managed to get a watchdog barking (see test 21 below). >> > > >> > >> > > >> > Unfortunately I have no JTAG probe, so I am limited to >> > > >> > driver >> > > >> > tweaks and tryouts... >> > > >> > Here are the tests I have performed so far, along with a >> > > >> > todo >> > > >> > list: >> > > >> > >> > > >> > FAILED means that the issue came up. >> > > >> > PASSED means that the issue has not come up. >> > > >> > DONE, NOT DONE, ONGOING are more related to a todo list than >> > > >> > a >> > > >> > test >> > > >> > report. >> > > >> > >> > > >> > 1. check with constant cpu load (stress -c 2) - FAILED >> > > >> > 2. check if problem occurs on older releases (non ICS) - NOT >> > > >> > DONE >> > > >> > 3. try CONFIG_PL310_ERRATA_769419 patch in cpuidle - FAILED >> > > >> > 4. check without USB hub connected - FAILED >> > > >> > 5. check with usbcore.autosuspend=600 added to cmdline - >> > > >> > FAILED >> > > >> > 6. patch ehci-omap.c to verify clock frequency - NOT DONE >> > > >> > 7. check with CPU1 offlined - FAILED >> > > >> > 8. check ethtool on android - FAILED >> > > >> > Cannot get register dump: Operation not supported on >> > > >> > transport >> > > >> > endpoint >> > > >> > 9. check without USB_EHCI_TT_NEWSCHED - FAILED >> > > >> > >> > > >> > 10. try to unbind, rebind smsc95xx - FAILED >> > > >> > 11. disable turbo_mode and reset the chip - FAILED >> > > >> > 12. test with "CONFIG_NO_HZ is not set" - FAILED >> > > >> > 13. test with another external USB ethernet dongle - NOT >> > > >> > DONE >> > > >> > 14. test linaro-12.05 ICS release and see ethernet behavior >> > > >> > - >> > > >> > PASSED >> > > >> > Ethernet runs fine on release: >> > > >> > . 12.05 tracking - PASSED >> > > >> > . 11.10 tracking - PASSED >> > > >> > . 11.09 release - PASSED >> > > >> > 15. try with "netcfg eth0 dhcp" - FAILED >> > > >> > 16. check datasheet - ONGOING >> > > >> > registers description is missing on 9514.pdf, only eeprom is >> > > >> > described >> > > >> > 17. adapt driver to ethtool - DONE >> > > >> > 18. dump registers and check against linaro 11.09 - ONGOING >> > > >> > 19. ethtool returns heaps of "0", the pattern I added to the >> > > >> > array >> > > >> > is all replaced by "0"... >> > > >> > Actually the eeprom is blank. I found it out since each time >> > > >> > I >> > > >> > unbind/bind the device to smsc95xx driver, I get a random >> > > >> > MAC >> > > >> > address... >> > > >> > >> > > >> > 20. test with 11.09 linaro kernel - NOT DONE >> > > >> > zygote not starting >> > > >> > 21. uploading 24MB file on the web (http://dl.free.fr) - >> > > >> > FAILED >> > > >> > This occurred only with these patches added to my kernel: >> > > >> > From 8a78335 [PATCH] usbnet: consider device busy at each >> > > >> > recieved >> > > >> > packet >> > > >> > From 5d5440a [PATCH] usbnet: don't clear urb->dev in >> > > >> > tx_complete >> > > >> > From 4231d47 [PATCH] net/usbnet: avoid recursive locking in >> > > >> > usbnet_stop() >> > > >> > From 1aa9bc5 [PATCH] usbnet: use netif_tx_wake_queue >> > > >> > instead >> > > >> > of >> > > >> > netif_start_queue >> > > >> > From 7bdd402 [PATCH] net/usbnet: reserve headroom on rx >> > > >> > skbs >> > > >> > From 0956a8c [PATCH] usbnet: increase URB reference count >> > > >> > before >> > > >> > usb_unlink_urb >> > > >> > From 9bbf566 [PATCH] net: usb: smsc95xx: fix mtu >> > > >> > From 720f3d7 [PATCH] usbnet: fix leak of transfer buffer of >> > > >> > dev->interrupt >> > > >> > From a472384 [PATCH] usbnet: fix failure handling in >> > > >> > usbnet_probe >> > > >> > From 5b6e9bc [PATCH] usbnet: fix skb traversing races >> > > >> > during >> > > >> > unlink(v2) >> > > >> > From 07d69d4 [PATCH] smsc95xx: mark link down on startup >> > > >> > and >> > > >> > let >> > > >> > PHY interrupt >> > > >> > a timeout occurred: >> > > >> > http://pastebin.com/KpaTJY3N >> > > >> > >> > > >> > My current kernel is based on: >> > > >> > commit 52f476403350050beb0dff135a55c06c9e7a82a9 >> > > >> > Author: Jean-Baptiste Queru <jbq(a)google.com> >> > > >> > Subject: Revert "gpu: pvr: Revert to 1.8@550175" >> > > >> > >> > > >> > I managed to get a register and PHY dump when upload is >> > > >> > stuck, >> > > >> > thanks to ethtool: >> > > >> > >> > > >> > 000: 01 00 00 ec 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 010: 04 00 00 00 00 14 00 00 00 00 00 00 00 20 00 00 >> > > >> > 020: 81 00 00 00 00 00 11 01 1f 00 00 1f a0 30 f8 00 >> > > >> > 030: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 >> > > >> > 040: 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 060: 00 00 00 00 00 00 00 00 00 80 00 00 00 20 00 00 >> > > >> > 070: 00 00 00 00 83 0f 83 0f 00 00 00 00 0f 06 0f 06 >> > > >> > 080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 090: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 0a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 0b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 0c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 0d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 0e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 0f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 100: 0c 20 10 00 f7 6f 00 00 a2 7d 13 dd 00 00 00 40 >> > > >> > 110: 20 00 00 80 40 09 00 00 e1 c1 00 00 00 00 00 00 >> > > >> > 120: 00 81 00 00 ff ff 00 00 00 00 00 00 00 00 00 00 >> > > >> > 130: 00 31 00 00 2d 78 00 00 07 00 00 00 c3 c0 00 00 >> > > >> > 140: e1 0d 00 00 e1 c1 00 00 0b 00 00 00 ff ff 00 00 >> > > >> > 150: ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 >> > > >> > 160: ff ff 00 00 ff ff 00 00 ff ff 00 00 00 00 00 00 >> > > >> > 170: 40 00 00 00 02 00 00 00 e1 00 00 00 ff ff 00 00 >> > > >> > 180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > > >> > 190: ff ff 00 00 ff ff 00 00 00 00 00 00 0a 00 00 00 >> > > >> > 1a0: 00 00 00 00 c8 00 00 00 50 00 00 00 58 10 00 00 >> > > >> > >> > > >> > But the 9514.pdf datasheet I have misses register >> > > >> > description. >> > > >> > Then decoding all this is quite troublesome. >> > > >> > >> > > >> > I saw that Ubuntu release got trouble with this chipset and >> > > >> > acpi. >> > > >> > But there is no acpi on Android AFAIK. >> > > >> > Did anyone else experience this issue? >> > > >> > Does anyone have an idea where it can come from? >> > > >> > >> > > >> > >> > > >> > Thanks a lot for your kind support, >> > > >> > Emeric >> > > >> > _______________________________________________ >> > > >> > Omapandroid-discussion mailing list >> > > >> > Omapandroid-discussion(a)gforge.ti.com >> > > >> > https://gforge.ti.com/mailman/listinfo/omapandroid-discussion >> > > >> >> > > > >> > > > _______________________________________________ >> > > > Omapandroid-discussion mailing list >> > > > Omapandroid-discussion(a)gforge.ti.com >> > > > https://gforge.ti.com/mailman/listinfo/omapandroid-discussion >> > > >> > > >> > > >> > > -- >> > > Zach Pfeffer >> > > Android Platform Team Lead, Linaro Platform Teams >> > > Linaro.org | Open source software for ARM SoCs >> > > Follow Linaro: http://www.facebook.com/pages/Linaro >> > > http://twitter.com/#!/linaroorg - >> > > http://www.linaro.org/linaro-blog >> > > -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 2 months

Linaro Android - Test result summary for calendar week 40

by amit khare

Hi, Calendar Week 40: Here is test result summary for Linaro Android platform on following boards: 1) ARM Versatile Express A9 2) ST-Ericsson Snowball Board 3) TI Panda Board 4430 4) TI Panda Board 4460 5) Samsung Origen Board *Synopsis: This week, Linaro Image Tool 12.09 version was used to flash SD-card for testing. **Installation instructions which were missing earlier are available now. **For panda we are back to tracking-blob build testing and test results look similar to week 38. On origen people,email and calendar application is not working. * Detail Report for all the boards: *1. ARM Versatile Express A9 - Android (Column J)* Test Results: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… Installation instruction is available. Email, Calendar, glamrk2 don't work and all other features remain same status as previous week. *2) ST-Ericsson Snowball Board - Android(Column J)* Test Results: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N… Install instruction are available. Same results as last week for other features. *3) TI Panda Board 4430 - Android(Column AA)* * * Test Results: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… On Panda board we are back to tracking-blob build and hardware graphics acceleration, glmark2, wifi, Bluetooth is not working. Rest of the results are similar to week 38 test results. *4) TI Panda Board 4460(Column M)* Test Results: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… Test results same as 4430. *5) Samsung Origen Board(Column E)* Test Results: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDRDV… All features remain the same status as previous week, except image installation instruction has been added to the build page. WiFi and Bluetooth are still unavailable and Ethernet Configuration Manager can't work properly either. Email app doesn't work, People app and Calendar app can't sync the content from Google server. Please refer to above test result link for more details. Note - For the previous week (Calendar week 39) summary, please refer to attachment. Thanks, Amit khare <amit.khare(a)linaro.org> QA Services - Linaro Platform http://wiki.linaro.org/Platform/QA

13 years, 2 months

issue with repo upload

by BELLONI Alexandre

Hi, I'm trying to submit my changes in gerrit with repo upload. I have changes in device/linaro/pandaboard and system/core. Basically, repo is complaining about device/linaro/pandaboard not having the android-4.1.1_r4 tag: error.GitError: device/linaro/pandaboard rev-list ('--abbrev=8', '--abbrev-commit', '--pretty=oneline', '--reverse', '--date-order', '^refs/tags/android-4.1.1_r4', u'refs/heads/sdcard_mount', '--'): fatal: bad revision '^refs/tags/android-4.1.1_r4' I'm not sure how I should go forward from there. Any input ? -- Alexandre Belloni Linux/Android Technical Leader Direct Phone : +33 4 26 49 25 08 Adeneo Embedded Adetel Group 4, ch. du Ruisseau - 69134 Ecully, France - Phone: +33 4 72 18 08 40 www.adeneo-embedded.com

13 years, 2 months

Linaro Galaxy Nexus Build

by balthazar

Hi, Just a quick question here: Are you planning to update the Galaxy Nexus build to JRO03R? Last time I checked it was still based on JRO03H. Thanks :) ____________________________________________________________ GET FREE SMILEYS FOR YOUR IM & EMAIL - Learn more at http://www.inbox.com/smileys Works with AIM®, MSN® Messenger, Yahoo!® Messenger, ICQ®, Google Talk™ and most webmails

13 years, 2 months

experimental repo changes in the master branch

by Vishal Bhoj

Hi, There is a an experimental feature of groups added in manifest by JBQ to reduce the downloads when we clone . The details are here: https://groups.google.com/forum/#!msg/android-building/Zf1oirfV_v0/1VSGkFic… The current issue is repo manifest -r -o seems to be broken with this new group feature due to which I am not able to build AOSP galaxy nexus master build: https://android-build.linaro.org/builds/~vishalbhoj/nexus-asop/ Fow now I will work out of android build from the branch android-4.1.1_r6 . On the other note, this feature should allow us to download kernel and u-boot selectively depending on the target which can allow us to get to a single manifest . I guess we should put invest some time in it. Regards, Vishal

13 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-android