Hi Linaro,
Following is my setup.
Repo used --------- repo init -u git://android.git.linaro.org/platform/manifest.git -b linaro_android_4.0.3 -m staging-panda.xml
Tool chain used --------------- Android prebuilt tool chain is used and location in the repo is /prebuilt/linux-x86/toolchain/arm-linux-androideabi-4.4.x/bin/
Make Command ------------- make TARGET_PRODUCT=pandaboard TARGET_TOOLS_PREFIX=./prebuilt/linux-x86/toolchain/arm-linux-androideabi-4.4.x/bin/arm-linux-androideabi- boottarball systemtarball userdatatarball
Preparing the SDCard --------------------- linaro-android-media-create --mmc /dev/sdb --dev panda --system out/target/product/pandaboard/system.tar.bz2 --userdata out/target/product/pandaboard/userdata.tar.bz2 --boot out/target/product/pandaboard/boot.tar.bz2
I am facing the problem when i placed sdcard and started the panda board. It stops with "Uncompressing Linux... done, booting the kernel."
Any help would be well come.
Minicom Log -----------U-Boot 2011.12-00001-g8df5795 (Mar 27 2012 - 03:35:53) Texas Instruments OMAP4430 ES2.1 Bypassing DPLL failed 4a008180 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img
CPU : OMAP4430 ES2.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB WARNING: Caches not enabled MMC: OMAP SD/MMC: 0 Using default environment
In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt
** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0 reading uEnv.txt
** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr
449 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 reading uImage
4586988 bytes read reading uInitrd
216182 bytes read ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux-3.1.0+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4586924 Bytes = 4.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 216118 Bytes = 211.1 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Aptina India Private Limited / Frontline Grandeur, 14 Walton Road, Bangalore - 560001, India
This e-mail and any attachments contain confidential information and are solely for the review and use of the intended recipient. If you have received this e-mail in error, please notify the sender and destroy this e-mail and any copies.