Hi, Linas
Maybe you can try following commands:
---------------------------------------------------------------------------------------------- netcfg eth0 dhcp #get your eth network up ifconfig eth0 #get your board IP
echo 0>/sys/class/android_usb/android0/enable #enable adb via IP setprop service.adb.tcp.port 5555 #set the adb connection port stop adbd # restart adbd start adbd ----------------------------------------------------------------------------------------------
If the above commands work for you, please let me know. I will update the wiki then.
Thanks, Yongqin Liu
On 23 April 2012 19:06, Linas Chang shchang@marvell.com wrote:
Dear linaro-support team****
Currently , I used linaro-android_snowball-ics-gcc46-igloo-stable-blob-12.03-release at your snowboard****
I face a question , that is****
When I used adb , follow below command form your web-site****
- ADB only works over IP
In the console type:****
**· ** stop adbd****
**· ** setprop service.adb.tcp.port 6565****
**· ** start adbd****
**· ** ifconfig eth0 # to get boardsIP****
after my host connect to device****
, I try to used adb push –s <device IP>:6565 <my txt file> /data or adb –s <device ip>:6565 shell form host****
Both fail ,and I didn’t see any error meaage , it look like hang after I type above adb command****
Do you have any suggestion about this****
Thanks for your help****
Linas****
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android