looks like this isn't working:
revno: 485committer: Mattias Backman mattias.backman@linaro.orgbranch nick: linaro-image-toolstimestamp: Thu 2012-01-19 14:44:02 +0100message: Post-release version bump to 2012.01.1 $./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev origen --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2
I see...
Device Mount point Size /dev/sda none 114473MB /dev/sda1 / 109778MB /dev/sda2 none 4693MB /dev/sda5 none 4693MB /dev/sdb none 0MB /dev/sdc none 7695MB /dev/sdc1 none 131MB /dev/sdc2 none 512MB /dev/sdc3 none 256MB /dev/sdc4 none 6795MB /dev/sdc5 none 511MB /dev/sdc6 none 6282MB /dev/sdd none 0MB /dev/sde none 0MB Are you 100% sure, on selecting [/dev/sdc] (y/n)? y Checking that no-one is using this disk right now ... OK Warning: bad partition start (earliest 1327105) partition ends on cylinder 1023, beyond the end of the disk partition ends on cylinder 1023, beyond the end of the disk Warning: partition 2 does not start at a cylinder boundary BLKRRPART: Device or resource busy The command to re-read the partition table failed. Run partprobe(8), kpartx(8) or reboot your system now, before using mkfs If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).) Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. end: (c,h,s) expected (0,132,8) found (1,127,32) start: (c,h,s) expected (0,133,8) found (2,1,30) end: (c,h,s) expected (18,10,23) found (67,127,31) start: (c,h,s) expected (18,10,25) found (68,0,1) end: (c,h,s) expected (85,239,56) found (323,127,32) start: (c,h,s) expected (85,239,57) found (324,0,1) end: (c,h,s) expected (1020,203,14) found (1023,127,32) partition ends on cylinder 1023, beyond the end of the disk start: (c,h,s) expected (85,240,27) found (324,1,1) end: (c,h,s) expected (119,230,10) found (451,127,32) start: (c,h,s) expected (119,230,43) found (452,1,1) end: (c,h,s) expected (187,210,42) found (707,127,32) start: (c,h,s) expected (187,211,13) found (708,1,1) end: (c,h,s) expected (1020,203,14) found (1023,127,32) partition ends on cylinder 1023, beyond the end of the disk Traceback (most recent call last): File "./linaro-image-tools/linaro-android-media-create", line 140, in <module> args.should_create_partitions, args.should_align_boot_part) File "/workspace/tmp/linaro-image-tools/linaro_image_tools/media_create/partitions.py", line 69, in setup_android_partitions get_android_partitions_for_media(media, board_config) File "/workspace/tmp/linaro-image-tools/linaro_image_tools/media_create/partitions.py", line 392, in get_android_partitions_for_media "Could not find boot partition for %s" % media.path) AssertionError: Could not find boot partition for /dev/sdc
this works:
revno: 484 tags: 2012.01 committer: Mattias Backman mattias.backman@linaro.org branch nick: linaro-image-tools timestamp: Thu 2012-01-19 14:43:59 +0100 message: Release 2012.01