hi，

I read tutorials in :http://releases.linaro.org/12.05/android/leb-panda/ I Build a Custom Image and download 3 files: boot.tar.bz2, system.tar.bz2,userdata.tar.bz2。 the step is:

# Create media $ sudo linaro-android-media-create --mmc /dev/sdX --dev panda --system system.tar.bz2 --boot boot.tar.bz2 --userdata userdata.tar.bz2

# Get binaries $ wget http://releases.linaro.org/12.05/android/images/panda-ics-gcc47-tilt-trackin... $ chmod a+x install-binaries.sh $ ./install-binaries.sh /dev/sdX2 "device node of system partition"

then , i boot pandaboard ES,but failed. here is the information from minicom.

U-Boot SPL 2012.04.01 (May 23 2012 - 14:46:36) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img

U-Boot 2012.04.01 (May 23 2012 - 14:46:36)

CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment

In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt

** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0 Panda # BOOT Unknown command 'BOOT' - try 'help' Panda # boot reading uEnv.txt

** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr

498 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 reading uImage

4772184 bytes read reading uInitrd

208260 bytes read reading board.dtb

** Unable to read "board.dtb" from mmc 0:1 ** ## Booting kernel from Legacy Image at 80200000 ... Image Naux-3.2.0+ Imype: ARM Linux Kernel Image (uncompressed) Data Size: 4772120 Bytes = 4.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 208196 Bytes = 203.3 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 4 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found Waiting for Ethernet connection... unable to connect. missing environment variable: pxeuuid missing environment variable: ethaddr missing environment variable: bootfile Retrieving file: pxelinux.cfg/01-2e-60-a6-5d-4e-01 Waiting for Ethernet connection... unable to connect. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 Waiting for Ethernet connection... unable to connect. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 Waiting for Ethernet connection... unable to connect. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 Waiting for Ethernet connection... unable to connect. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 Waiting for Ethernet connection... unable to connect. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 Waiting for Ethernet connection... unable to connect. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 Waiting for Ethernet connection... unable to connect. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 Waiting for Ethernet connection... unable to connect. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 Waiting for Ethernet connection... unable to connect. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default Waiting for Ethernet connection... unable to connect. Config file not found Ignoring unknown command: �������������� Ignoring unknown command: ��*�����������*

what's the problem?