I have just purchased an Origen Board - Full Package. I flashed the SD card with igen-ics-gcc46-samsunglt-stable-blob.img and placed it into the SD card slot. I flicked the power switch and pressed SWITCH then POWER and saw the board booting in terminal. However, after a short period of time LED4 turns off and I do not see the LCD light or show the Android screen. The output in terminal is given below. Is my board faulty or have I not flashed the correct image to the SD card ?
U-Boot 2011.06-01275-gd6186aa (Feb 17 2012 - 08:54:12) for ORIGEN
CPU: S5PC210@1000MHz
Board: ORIGEN DRAM: 1 GiB WARNING: Caches not enabled MMC: SAMSUNG SD/MMC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 reading boot.scr
397 bytes read Running bootscript from mmc0:2 ... ## Executing script at 42000000 reading uImage
4049424 bytes read reading uInitrd
166156 bytes read ## Booting kernel from Legacy Image at 40007000 ... Image Name: Linux-3.0.4+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4049360 Bytes = 3.9 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 166092 Bytes = 162.2 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. <5>Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap). <3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 <3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 <3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 <3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 <3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 <3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 <3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000 <3>CMA reserve : (null), addr is 0x57c00000, size is 0x0 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) <7>exynos4_init_clocks: initializing clocks <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics <3>s3c_register_clksrc: clock armclk has no registers set <3>mout_audss: bad source 0 <7>exynos4_setup_clocks: registering clocks <7>exynos4_setup_clocks: xtal is 24000000 <6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>sclk_pwm: source is ext_xtal (0), rate is 24000000 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_cam0: source is xusbxti (1), rate is 0 <6>sclk_cam1: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_mixer: source is sclk_dac (0), rate is 24000000 <6>sclk_fimd0: source is xusbxti (1), rate is 0 <6>sclk_fimd1: source is xusbxti (1), rate is 0 <6>sclk_sata: source is mout_mpll (0), rate is 133333333 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_spi: source is mout_mpll (6), rate is 80000000 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 <7>On node 0 totalpages: 188416 <7> Normal zone: 1472 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 186944 pages, LIFO batch:31 <6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 <7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096 <7>pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944 <5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
<6>PID hash table entries: 4096 (order: 2, 16384 bytes) <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 736MB = 736MB total <5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem <5>Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfe800000 - 0xffe00000 ( 22 MB) vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) lowmem : 0xc0000000 - 0xee000000 ( 736 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc078fd14 (7712 kB) .init : 0xc0790000 - 0xc07d5980 ( 279 kB) .data : 0xc07d6000 - 0xc0835930 ( 383 kB) .bss : 0xc0835954 - 0xc098bca8 (1369 kB) <6>Preemptible hierarchical RCU implementation. <6>NR_IRQS:624 <6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms <6>Console: colour dummy device 80x30 <6>console [tty0] enabled Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap). CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 CMA reserve : common, addr is 0x57c00000, size is 0x4000000 CMA reserve : (null), addr is 0x57c00000, size is 0x0 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) S3C24XX Clocks, Copyright 2004 Simtec Electronics s3c_register_clksrc: clock armclk has no registers set mout_audss: bad source 0 EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000 EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 sclk_pwm: source is ext_xtal (0), rate is 24000000 sclk_csis: source is xusbxti (1), rate is 0 sclk_csis: source is xusbxti (1), rate is 0 sclk_cam0: source is xusbxti (1), rate is 0 sclk_cam1: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_mixer: source is sclk_dac (0), rate is 24000000 sclk_fimd0: source is xusbxti (1), rate is 0 sclk_fimd1: source is xusbxti (1), rate is 0 sclk_sata: source is mout_mpll (0), rate is 133333333 sclk_spi: source is xusbxti (1), rate is 0 sclk_spi: source is mout_mpll (6), rate is 80000000 sclk_spi: source is xusbxti (1), rate is 0 sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944 Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 736MB = 736MB total Memory: 601736k/601736k available, 151928k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfe800000 - 0xffe00000 ( 22 MB) vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) lowmem : 0xc0000000 - 0xee000000 ( 736 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc078fd14 (7712 kB) .init : 0xc0790000 - 0xc07d5980 ( 279 kB) .data : 0xc07d6000 - 0xc0835930 ( 383 kB) .bss : 0xc0835954 - 0xc098bca8 (1369 kB) Preemptible hierarchical RCU implementation. NR_IRQS:624 sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms Console: colour dummy device 80x30 console <tty0] enabled 6>console [ttySAC2] enabled console [tt<SAC2] enabled 6>Calibrating delay loop... Calibrating delay loop... <c>1992.29 BogoMIPS (lpj=4980736) 1992.29 BogoMIPS<(lpj=4980736) 6>pid_max: default: 32768 minimum: 301 pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 512 Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok ok <6>ftrace: allocating 19856 entries in 59 pages ftrace: allocating 19856 entries in 59 pages <6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 CPU0: thread -1, cpu 0, socket 9, <pidr 80000900 6>Calibrating local timer... Calibrating local timer... 249.93MHz. 249.93MHz. <6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available <6>L310 cache controller enabled L310 cache cont<oller enabled 6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B CPU1: Booted secondary processor <2>CPU1: Unknown IPI message 0x1
Hi Andrew,
On 17 March 2012 01:23, Andrew Fraser afraser@andyfraser.co.uk wrote:
I have just purchased an Origen Board - Full Package. I flashed the SD card with igen-ics-gcc46-samsunglt-stable-blob.img
We do not ship images in .img format. Did you try the images from https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc46-sam...
and placed it into the SD card slot. I flicked the power switch and pressed SWITCH then POWER and saw the board booting in terminal. However, after a short period of time LED4 turns off and I do not see the LCD light or show the Android screen.
Do you mean LCD and Android UI doesn't come up at all or they turned off after some time?
The output in terminal is given below. Is my board faulty or have I not flashed the correct image to the SD card ?
If this output is all you have got then there is definitely something wrong somewhere. Did you try booting Linaro's Ubuntu images on Origen?
Regards, Amit Pundir
U-Boot 2011.06-01275-gd6186aa (Feb 17 2012 - 08:54:12) for ORIGEN****
CPU: S5PC210@1000MHz****
Board: ORIGEN DRAM: 1 GiB WARNING: Caches not enabled MMC: SAMSUNG SD/MMC: 0 *** Warning - bad CRC, using default environment****
In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 reading boot.scr****
397 bytes read Running bootscript from mmc0:2 ... ## Executing script at 42000000 reading uImage****
4049424 bytes read reading uInitrd****
166156 bytes read ## Booting kernel from Legacy Image at 40007000 ... Image Name: Linux-3.0.4+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4049360 Bytes = 3.9 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 166092 Bytes = 162.2 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK****
Starting kernel ...****
Uncompressing Linux... done, booting the kernel. <5>Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap). <3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 <3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 <3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 <3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 <3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 <3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 <3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000 <3>CMA reserve : (null), addr is 0x57c00000, size is 0x0 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) <7>exynos4_init_clocks: initializing clocks <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics <3>s3c_register_clksrc: clock armclk has no registers set <3>mout_audss: bad source 0 <7>exynos4_setup_clocks: registering clocks <7>exynos4_setup_clocks: xtal is 24000000 <6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>sclk_pwm: source is ext_xtal (0), rate is 24000000 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_cam0: source is xusbxti (1), rate is 0 <6>sclk_cam1: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_mixer: source is sclk_dac (0), rate is 24000000 <6>sclk_fimd0: source is xusbxti (1), rate is 0 <6>sclk_fimd1: source is xusbxti (1), rate is 0 <6>sclk_sata: source is mout_mpll (0), rate is 133333333 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_spi: source is mout_mpll (6), rate is 80000000 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 <7>On node 0 totalpages: 188416 <7> Normal zone: 1472 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 186944 pages, LIFO batch:31 <6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 <7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096 <7>pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944 <5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
<6>PID hash table entries: 4096 (order: 2, 16384 bytes) <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 736MB = 736MB total <5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem <5>Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfe800000 - 0xffe00000 ( 22 MB) vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) lowmem : 0xc0000000 - 0xee000000 ( 736 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc078fd14 (7712 kB) .init : 0xc0790000 - 0xc07d5980 ( 279 kB) .data : 0xc07d6000 - 0xc0835930 ( 383 kB) .bss : 0xc0835954 - 0xc098bca8 (1369 kB) <6>Preemptible hierarchical RCU implementation. <6>NR_IRQS:624 <6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms <6>Console: colour dummy device 80x30 <6>console [tty0] enabled Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap). CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 CMA reserve : common, addr is 0x57c00000, size is 0x4000000 CMA reserve : (null), addr is 0x57c00000, size is 0x0 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) S3C24XX Clocks, Copyright 2004 Simtec Electronics s3c_register_clksrc: clock armclk has no registers set mout_audss: bad source 0 EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000 EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 sclk_pwm: source is ext_xtal (0), rate is 24000000 sclk_csis: source is xusbxti (1), rate is 0 sclk_csis: source is xusbxti (1), rate is 0 sclk_cam0: source is xusbxti (1), rate is 0 sclk_cam1: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_mixer: source is sclk_dac (0), rate is 24000000 sclk_fimd0: source is xusbxti (1), rate is 0 sclk_fimd1: source is xusbxti (1), rate is 0 sclk_sata: source is mout_mpll (0), rate is 133333333 sclk_spi: source is xusbxti (1), rate is 0 sclk_spi: source is mout_mpll (6), rate is 80000000 sclk_spi: source is xusbxti (1), rate is 0 sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944 Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 736MB = 736MB total Memory: 601736k/601736k available, 151928k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfe800000 - 0xffe00000 ( 22 MB) vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) lowmem : 0xc0000000 - 0xee000000 ( 736 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc078fd14 (7712 kB) .init : 0xc0790000 - 0xc07d5980 ( 279 kB) .data : 0xc07d6000 - 0xc0835930 ( 383 kB) .bss : 0xc0835954 - 0xc098bca8 (1369 kB) Preemptible hierarchical RCU implementation. NR_IRQS:624 sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms Console: colour dummy device 80x30 console <tty0] enabled 6>console [ttySAC2] enabled console [tt<SAC2] enabled 6>Calibrating delay loop... Calibrating delay loop... <c>1992.29 BogoMIPS (lpj=4980736) 1992.29 BogoMIPS<(lpj=4980736) 6>pid_max: default: 32768 minimum: 301 pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 512 Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok ok <6>ftrace: allocating 19856 entries in 59 pages ftrace: allocating 19856 entries in 59 pages <6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 CPU0: thread -1, cpu 0, socket 9, <pidr 80000900 6>Calibrating local timer... Calibrating local timer... 249.93MHz. 249.93MHz. <6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available <6>L310 cache controller enabled L310 cache cont<oller enabled 6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B CPU1: Booted secondary processor <2>CPU1: Unknown IPI message 0x1****
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
On 19 March 2012 08:02, Amit Pundir amit.pundir@linaro.org wrote:
Hi Andrew,
On 17 March 2012 01:23, Andrew Fraser afraser@andyfraser.co.uk wrote:
I have just purchased an Origen Board - Full Package. I flashed the SD card with igen-ics-gcc46-samsunglt-stable-blob.img
We do not ship images in .img format. Did you try the images from https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc46-sam... ?
We provide pre-built images for releases: http://releases.linaro.org/12.02/android/leb-origen/origen-ics-gcc46-samsung...
and placed it into the SD card slot. I flicked the power switch and pressed SWITCH then POWER and saw the board booting in terminal. However, after a short period of time LED4 turns off and I do not see the LCD light or show the Android screen.
Do you mean LCD and Android UI doesn't come up at all or they turned off after some time?
The output in terminal is given below. Is my board faulty or have I not flashed the correct image to the SD card ?
If this output is all you have got then there is definitely something wrong somewhere. Did you try booting Linaro's Ubuntu images on Origen?
Regards, Amit Pundir
U-Boot 2011.06-01275-gd6186aa (Feb 17 2012 - 08:54:12) for ORIGEN
CPU: S5PC210@1000MHz
Board: ORIGEN DRAM: 1 GiB WARNING: Caches not enabled MMC: SAMSUNG SD/MMC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 reading boot.scr
397 bytes read Running bootscript from mmc0:2 ... ## Executing script at 42000000 reading uImage
4049424 bytes read reading uInitrd
166156 bytes read ## Booting kernel from Legacy Image at 40007000 ... Image Name: Linux-3.0.4+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4049360 Bytes = 3.9 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 166092 Bytes = 162.2 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. <5>Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap). <3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 <3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 <3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 <3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 <3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 <3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 <3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000 <3>CMA reserve : (null), addr is 0x57c00000, size is 0x0 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) <7>exynos4_init_clocks: initializing clocks <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics <3>s3c_register_clksrc: clock armclk has no registers set <3>mout_audss: bad source 0 <7>exynos4_setup_clocks: registering clocks <7>exynos4_setup_clocks: xtal is 24000000 <6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>sclk_pwm: source is ext_xtal (0), rate is 24000000 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_cam0: source is xusbxti (1), rate is 0 <6>sclk_cam1: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_mixer: source is sclk_dac (0), rate is 24000000 <6>sclk_fimd0: source is xusbxti (1), rate is 0 <6>sclk_fimd1: source is xusbxti (1), rate is 0 <6>sclk_sata: source is mout_mpll (0), rate is 133333333 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_spi: source is mout_mpll (6), rate is 80000000 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 <7>On node 0 totalpages: 188416 <7> Normal zone: 1472 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 186944 pages, LIFO batch:31 <6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 <7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096 <7>pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944 <5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
<6>PID hash table entries: 4096 (order: 2, 16384 bytes) <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 736MB = 736MB total <5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem <5>Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfe800000 - 0xffe00000 ( 22 MB) vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) lowmem : 0xc0000000 - 0xee000000 ( 736 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc078fd14 (7712 kB) .init : 0xc0790000 - 0xc07d5980 ( 279 kB) .data : 0xc07d6000 - 0xc0835930 ( 383 kB) .bss : 0xc0835954 - 0xc098bca8 (1369 kB) <6>Preemptible hierarchical RCU implementation. <6>NR_IRQS:624 <6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms <6>Console: colour dummy device 80x30 <6>console [tty0] enabled Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap). CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 CMA reserve : common, addr is 0x57c00000, size is 0x4000000 CMA reserve : (null), addr is 0x57c00000, size is 0x0 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) S3C24XX Clocks, Copyright 2004 Simtec Electronics s3c_register_clksrc: clock armclk has no registers set mout_audss: bad source 0 EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000 EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 sclk_pwm: source is ext_xtal (0), rate is 24000000 sclk_csis: source is xusbxti (1), rate is 0 sclk_csis: source is xusbxti (1), rate is 0 sclk_cam0: source is xusbxti (1), rate is 0 sclk_cam1: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_mixer: source is sclk_dac (0), rate is 24000000 sclk_fimd0: source is xusbxti (1), rate is 0 sclk_fimd1: source is xusbxti (1), rate is 0 sclk_sata: source is mout_mpll (0), rate is 133333333 sclk_spi: source is xusbxti (1), rate is 0 sclk_spi: source is mout_mpll (6), rate is 80000000 sclk_spi: source is xusbxti (1), rate is 0 sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944 Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 736MB = 736MB total Memory: 601736k/601736k available, 151928k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfe800000 - 0xffe00000 ( 22 MB) vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) lowmem : 0xc0000000 - 0xee000000 ( 736 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc078fd14 (7712 kB) .init : 0xc0790000 - 0xc07d5980 ( 279 kB) .data : 0xc07d6000 - 0xc0835930 ( 383 kB) .bss : 0xc0835954 - 0xc098bca8 (1369 kB) Preemptible hierarchical RCU implementation. NR_IRQS:624 sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms Console: colour dummy device 80x30 console <tty0] enabled 6>console [ttySAC2] enabled console [tt<SAC2] enabled 6>Calibrating delay loop... Calibrating delay loop... <c>1992.29 BogoMIPS (lpj=4980736) 1992.29 BogoMIPS<(lpj=4980736) 6>pid_max: default: 32768 minimum: 301 pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 512 Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok ok <6>ftrace: allocating 19856 entries in 59 pages ftrace: allocating 19856 entries in 59 pages <6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 CPU0: thread -1, cpu 0, socket 9, <pidr 80000900 6>Calibrating local timer... Calibrating local timer... 249.93MHz. 249.93MHz. <6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available <6>L310 cache controller enabled L310 cache cont<oller enabled 6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B CPU1: Booted secondary processor <2>CPU1: Unknown IPI message 0x1
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
On 19 March 2012 12:01, Fathi Boudra fathi.boudra@linaro.org wrote:
On 19 March 2012 08:02, Amit Pundir amit.pundir@linaro.org wrote:
Hi Andrew,
On 17 March 2012 01:23, Andrew Fraser afraser@andyfraser.co.uk wrote:
I have just purchased an Origen Board - Full Package. I flashed the SD card with igen-ics-gcc46-samsunglt-stable-blob.img
We do not ship images in .img format. Did you try the images from
https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc46-sam...
?
We provide pre-built images for releases:
http://releases.linaro.org/12.02/android/leb-origen/origen-ics-gcc46-samsung...
My bad.
and placed it into the SD card slot. I flicked the power switch and pressed SWITCH then POWER and saw the board booting in terminal.
However,
after a short period of time LED4 turns off and I do not see the LCD
light
or show the Android screen.
Do you mean LCD and Android UI doesn't come up at all or they turned off after some time?
The output in terminal is given below. Is my board faulty or have I not flashed the correct image to the SD card ?
If this output is all you have got then there is definitely something
wrong
somewhere. Did you try booting Linaro's Ubuntu images on Origen?
Regards, Amit Pundir
U-Boot 2011.06-01275-gd6186aa (Feb 17 2012 - 08:54:12) for ORIGEN
CPU: S5PC210@1000MHz
Board: ORIGEN DRAM: 1 GiB WARNING: Caches not enabled MMC: SAMSUNG SD/MMC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 reading boot.scr
397 bytes read Running bootscript from mmc0:2 ... ## Executing script at 42000000 reading uImage
4049424 bytes read reading uInitrd
166156 bytes read ## Booting kernel from Legacy Image at 40007000 ... Image Name: Linux-3.0.4+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4049360 Bytes = 3.9 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 166092 Bytes = 162.2 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. <5>Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version
4.6.3
20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb
17
09:34:26 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap). <3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 <3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 <3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 <3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 <3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 <3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 <3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000 <3>CMA reserve : (null), addr is 0x57c00000, size is 0x0 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) <7>exynos4_init_clocks: initializing clocks <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics <3>s3c_register_clksrc: clock armclk has no registers set <3>mout_audss: bad source 0 <7>exynos4_setup_clocks: registering clocks <7>exynos4_setup_clocks: xtal is 24000000 <6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000,
ACLK200=200000000
ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>sclk_pwm: source is ext_xtal (0), rate is 24000000 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_cam0: source is xusbxti (1), rate is 0 <6>sclk_cam1: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_mixer: source is sclk_dac (0), rate is 24000000 <6>sclk_fimd0: source is xusbxti (1), rate is 0 <6>sclk_fimd1: source is xusbxti (1), rate is 0 <6>sclk_sata: source is mout_mpll (0), rate is 133333333 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_spi: source is mout_mpll (6), rate is 80000000 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 <7>On node 0 totalpages: 188416 <7> Normal zone: 1472 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 186944 pages, LIFO batch:31 <6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 <7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096 <7>pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages:
186944
<5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait
ro
init=/init androidboot.console=ttySAC2 console=ttySAC2
root=/dev/mmcblk0p2
<6>PID hash table entries: 4096 (order: 2, 16384 bytes) <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 736MB = 736MB total <5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem <5>Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfe800000 - 0xffe00000 ( 22 MB) vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) lowmem : 0xc0000000 - 0xee000000 ( 736 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc078fd14 (7712 kB) .init : 0xc0790000 - 0xc07d5980 ( 279 kB) .data : 0xc07d6000 - 0xc0835930 ( 383 kB) .bss : 0xc0835954 - 0xc098bca8 (1369 kB) <6>Preemptible hierarchical RCU implementation. <6>NR_IRQS:624 <6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms <6>Console: colour dummy device 80x30 <6>console [tty0] enabled Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb
17
09:34:26 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region
overlap).
CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 CMA reserve : common, addr is 0x57c00000, size is 0x4000000 CMA reserve : (null), addr is 0x57c00000, size is 0x0 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) S3C24XX Clocks, Copyright 2004 Simtec Electronics s3c_register_clksrc: clock armclk has no registers set mout_audss: bad source 0 EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000 EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 sclk_pwm: source is ext_xtal (0), rate is 24000000 sclk_csis: source is xusbxti (1), rate is 0 sclk_csis: source is xusbxti (1), rate is 0 sclk_cam0: source is xusbxti (1), rate is 0 sclk_cam1: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_mixer: source is sclk_dac (0), rate is 24000000 sclk_fimd0: source is xusbxti (1), rate is 0 sclk_fimd1: source is xusbxti (1), rate is 0 sclk_sata: source is mout_mpll (0), rate is 133333333 sclk_spi: source is xusbxti (1), rate is 0 sclk_spi: source is mout_mpll (6), rate is 80000000 sclk_spi: source is xusbxti (1), rate is 0 sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages:
186944
Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2
root=/dev/mmcblk0p2
PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 736MB = 736MB total Memory: 601736k/601736k available, 151928k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfe800000 - 0xffe00000 ( 22 MB) vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) lowmem : 0xc0000000 - 0xee000000 ( 736 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc078fd14 (7712 kB) .init : 0xc0790000 - 0xc07d5980 ( 279 kB) .data : 0xc07d6000 - 0xc0835930 ( 383 kB) .bss : 0xc0835954 - 0xc098bca8 (1369 kB) Preemptible hierarchical RCU implementation. NR_IRQS:624 sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms Console: colour dummy device 80x30 console <tty0] enabled 6>console [ttySAC2] enabled console [tt<SAC2] enabled 6>Calibrating delay loop... Calibrating delay loop... <c>1992.29
BogoMIPS
(lpj=4980736) 1992.29 BogoMIPS<(lpj=4980736) 6>pid_max: default: 32768 minimum: 301 pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 512 Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok ok <6>ftrace: allocating 19856 entries in 59 pages ftrace: allocating 19856 entries in 59 pages <6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 CPU0: thread -1, cpu 0, socket 9, <pidr 80000900 6>Calibrating local timer... Calibrating local timer... 249.93MHz. 249.93MHz. <6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available <6>L310 cache controller enabled L310 cache cont<oller enabled 6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B CPU1: Booted secondary processor <2>CPU1: Unknown IPI message 0x1
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Fathi Boudra Linaro Release Manager | Validation Project Manager Linaro.org | Open source software for ARM SoCs
Hi, could you paste your command to flash SD card here?
On 17 March 2012 03:53, Andrew Fraser afraser@andyfraser.co.uk wrote:
I have just purchased an Origen Board - Full Package. I flashed the SD card with igen-ics-gcc46-samsunglt-stable-blob.img and placed it into the SD card slot. I flicked the power switch and pressed SWITCH then POWER and saw the board booting in terminal. However, after a short period of time LED4 turns off and I do not see the LCD light or show the Android screen. The output in terminal is given below. Is my board faulty or have I not flashed the correct image to the SD card ?****
U-Boot 2011.06-01275-gd6186aa (Feb 17 2012 - 08:54:12) for ORIGEN****
CPU: S5PC210@1000MHz****
Board: ORIGEN DRAM: 1 GiB WARNING: Caches not enabled MMC: SAMSUNG SD/MMC: 0 *** Warning - bad CRC, using default environment****
In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 reading boot.scr****
397 bytes read Running bootscript from mmc0:2 ... ## Executing script at 42000000 reading uImage****
4049424 bytes read reading uInitrd****
166156 bytes read ## Booting kernel from Legacy Image at 40007000 ... Image Name: Linux-3.0.4+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4049360 Bytes = 3.9 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 166092 Bytes = 162.2 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK****
Starting kernel ...****
Uncompressing Linux... done, booting the kernel. <5>Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap). <3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 <3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 <3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 <3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 <3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 <3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 <3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000 <3>CMA reserve : (null), addr is 0x57c00000, size is 0x0 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) <7>exynos4_init_clocks: initializing clocks <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics <3>s3c_register_clksrc: clock armclk has no registers set <3>mout_audss: bad source 0 <7>exynos4_setup_clocks: registering clocks <7>exynos4_setup_clocks: xtal is 24000000 <6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>sclk_pwm: source is ext_xtal (0), rate is 24000000 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_cam0: source is xusbxti (1), rate is 0 <6>sclk_cam1: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_mixer: source is sclk_dac (0), rate is 24000000 <6>sclk_fimd0: source is xusbxti (1), rate is 0 <6>sclk_fimd1: source is xusbxti (1), rate is 0 <6>sclk_sata: source is mout_mpll (0), rate is 133333333 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_spi: source is mout_mpll (6), rate is 80000000 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 <7>On node 0 totalpages: 188416 <7> Normal zone: 1472 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 186944 pages, LIFO batch:31 <6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 <7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096 <7>pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944 <5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
<6>PID hash table entries: 4096 (order: 2, 16384 bytes) <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 736MB = 736MB total <5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem <5>Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfe800000 - 0xffe00000 ( 22 MB) vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) lowmem : 0xc0000000 - 0xee000000 ( 736 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc078fd14 (7712 kB) .init : 0xc0790000 - 0xc07d5980 ( 279 kB) .data : 0xc07d6000 - 0xc0835930 ( 383 kB) .bss : 0xc0835954 - 0xc098bca8 (1369 kB) <6>Preemptible hierarchical RCU implementation. <6>NR_IRQS:624 <6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms <6>Console: colour dummy device 80x30 <6>console [tty0] enabled Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap). CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 CMA reserve : common, addr is 0x57c00000, size is 0x4000000 CMA reserve : (null), addr is 0x57c00000, size is 0x0 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) S3C24XX Clocks, Copyright 2004 Simtec Electronics s3c_register_clksrc: clock armclk has no registers set mout_audss: bad source 0 EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000 EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 uclk1: source is mout_mpll (6), rate is 100000000 sclk_pwm: source is ext_xtal (0), rate is 24000000 sclk_csis: source is xusbxti (1), rate is 0 sclk_csis: source is xusbxti (1), rate is 0 sclk_cam0: source is xusbxti (1), rate is 0 sclk_cam1: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_fimc: source is xusbxti (1), rate is 0 sclk_mixer: source is sclk_dac (0), rate is 24000000 sclk_fimd0: source is xusbxti (1), rate is 0 sclk_fimd1: source is xusbxti (1), rate is 0 sclk_sata: source is mout_mpll (0), rate is 133333333 sclk_spi: source is xusbxti (1), rate is 0 sclk_spi: source is mout_mpll (6), rate is 80000000 sclk_spi: source is xusbxti (1), rate is 0 sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944 Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 736MB = 736MB total Memory: 601736k/601736k available, 151928k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfe800000 - 0xffe00000 ( 22 MB) vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) lowmem : 0xc0000000 - 0xee000000 ( 736 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc078fd14 (7712 kB) .init : 0xc0790000 - 0xc07d5980 ( 279 kB) .data : 0xc07d6000 - 0xc0835930 ( 383 kB) .bss : 0xc0835954 - 0xc098bca8 (1369 kB) Preemptible hierarchical RCU implementation. NR_IRQS:624 sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms Console: colour dummy device 80x30 console <tty0] enabled 6>console [ttySAC2] enabled console [tt<SAC2] enabled 6>Calibrating delay loop... Calibrating delay loop... <c>1992.29 BogoMIPS (lpj=4980736) 1992.29 BogoMIPS<(lpj=4980736) 6>pid_max: default: 32768 minimum: 301 pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 512 Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok ok <6>ftrace: allocating 19856 entries in 59 pages ftrace: allocating 19856 entries in 59 pages <6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 CPU0: thread -1, cpu 0, socket 9, <pidr 80000900 6>Calibrating local timer... Calibrating local timer... 249.93MHz. 249.93MHz. <6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available <6>L310 cache controller enabled L310 cache cont<oller enabled 6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B CPU1: Booted secondary processor <2>CPU1: Unknown IPI message 0x1****
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android@lists.linaro.org
-
Amit Pundir -
Andrew Fraser -
Chenglie He -
Fathi Boudra