Hi,
I have a working system based on Sumo. The system boots with a read-only rootfs, then applies are read-write overlay for /etc.
When I migrate to Warrior, systemd-resolved fails to start. If I mount the same rootfs via NFS, it starts and works fine. systemd-timesyncd is also failing, but I haven't looked into that yet. It also works fine on the NFS mounted system.
The resolve problem seems to be caused by two things: - /var/volatile is read-only - /run/systemd/resolve has the wrong ownership drwxr-xr-x 2 systemd-network systemd-journal 80 Jul 12 16:23 resolve/ I think this permissions problem may be a result of the /var/volatile mounting problems; it looks fine on the NFS mounted system.
If I manually mount /var/volatile (it's in fstab) and change the ownership on /run/systemd/resolve, the service starts just fine.
I also notice that /tmp is not mounted at all, which may be related.
Here are the various tmp mount points on my read-only rootfs:
$ mount | grep tmp devtmpfs on /dev type devtmpfs (rw,nosuid,size=112036k,nr_inodes=28009,mode=755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755) tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755) overlay on /etc type overlay (rw,relatime,lowerdir=/tmp/lower/etc,upperdir=/tmp/upper/etc,workdir=/tmp/upper/work/etc) tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=23840k,mode=700)
On the NFS mounted system, I see these:
$ mount | grep tmp devtmpfs on /dev type devtmpfs (rw,relatime,size=118180k,nr_inodes=29545,mode=755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755) tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) tmpfs on /var/volatile type tmpfs (rw,relatime) tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=23840k,mode=700)
As you can see, NFS has these extra mounts:
tmpfs on /tmp type tmpfs (rw,nosuid,nodev) tmpfs on /var/volatile type tmpfs (rw,relatime)
I've tried reverting a few commits that may be related, but I haven't had any luck working out things have changed, eg:
c4acf1b531 2018-10-19 volatile-binds: use overlayfs if available [Matt Hoosier]
Advice would be appreciated. Are there any particular areas I should be looking to work out what's going wrong?
Kind regards, Ryan.