Hi Dmitry,
Here is the output from those two commands: dpkg -l | grep libgl ii libgl1:arm64 1.1.0-1 arm64 Vendor neutral GL dispatch library -- legacy GL support ii libgl1-mesa-dri:arm64 19.1.1-1+linaro2 arm64 free implementation of the OpenGL API -- DRI modules ii libglapi-mesa:arm64 19.1.1-1+linaro2 arm64 free implementation of the GL API -- shared library ii libgles2:arm64 1.1.0-1 arm64 Vendor neutral GL dispatch library -- GLESv2 support ii libglew2.1:arm64 2.1.0-4 arm64 OpenGL Extension Wrangler - runtime environment ii libglib2.0-0:arm64 2.58.3-2+deb10u2 arm64 GLib library of C routines ii libglib2.0-bin 2.58.3-2+deb10u2 arm64 Programs for the GLib library ii libglib2.0-data 2.58.3-2+deb10u2 all Common files for GLib library ii libglu1-mesa:arm64 9.0.0-2.1+b3 arm64 Mesa OpenGL utility library (GLU) ii libglvnd0:arm64 1.1.0-1 arm64 Vendor neutral GL dispatch library ii libglx-mesa0:arm64 19.1.1-1+linaro2 arm64 free implementation of the OpenGL API -- GLX vendor library ii libglx0:arm64 1.1.0-1 arm64 Vendor neutral GL dispatch library -- GLX support root@linaro-alip:~# dpkg -l | grep mesa ii libegl-mesa0:arm64 19.1.1-1+linaro2 arm64 free implementation of the EGL API -- Mesa vendor library ii libgl1-mesa-dri:arm64 19.1.1-1+linaro2 arm64 free implementation of the OpenGL API -- DRI modules ii libglapi-mesa:arm64 19.1.1-1+linaro2 arm64 free implementation of the GL API -- shared library ii libglu1-mesa:arm64 9.0.0-2.1+b3 arm64 Mesa OpenGL utility library (GLU) ii libglx-mesa0:arm64 19.1.1-1+linaro2 arm64 free implementation of the OpenGL API -- GLX vendor library ii mesa-utils 8.4.0-1+b1 arm64 Miscellaneous Mesa GL utilities ii mesa-utils-extra 8.4.0-1+b1 arm64 Miscellaneous Mesa utilies (opengles, egl) root@linaro-alip:~#
Thanks, Kim
-----Original Message----- From: Kim Steiner Sent: Friday, October 28, 2022 7:52 AM To: Dmitry Baryshkov dmitry.baryshkov@linaro.org; Paul Neuhardt paul.neuhardt@linaro.org; sightlineapplications@lists.linaro.org Subject: RE: [Sightlineapplications] Re: Project Current Status and Completion
Hi Dmitry,
I'll get the information to you today.
I am curious how you are trying to reproduce the issue. Are you able to get into the temperature range (7C to 18C)that causes the issue (reading cat /sys/class/thermal/thermal_zone0/temp to confirm the temp)?
Thanks, Kim
-----Original Message----- From: Dmitry Baryshkov dmitry.baryshkov@linaro.org Sent: Friday, October 28, 2022 3:58 AM To: Kim Steiner kim.steiner@sightlineapplications.com; Paul Neuhardt paul.neuhardt@linaro.org; sightlineapplications@lists.linaro.org Subject: Re: [Sightlineapplications] Re: Project Current Status and Completion
Hi Kim,
On 27/10/2022 22:33, Kim Steiner wrote:
Hi All,
I haven’t anything since this last email. Did anyone look at the attachment? It seems like the gpu issue is not fixed, but I will wait for you to respond.
Please excuse me, it slipped through my mind during relocation. However I still can not reproduce the issue on my side. Let's do it this way. I'll provide today the initramfs for you to use for the test together with the instructions to run the test. While I'm working on it, could you please provide the details of the mesa package on your rootfs?
For example, could you please provide the output of the following commands on your rootfs:
dpkg -l | grep libgl dpkg -l | grep mesa
Thanks,
Kim
*From:* Kim Steiner *Sent:* Thursday, October 13, 2022 2:36 PM *To:* Paul Neuhardt paul.neuhardt@linaro.org; sightlineapplications@lists.linaro.org *Subject:* RE: [Sightlineapplications] Project Current Status and Completion
Hi All,
I ran our usual test with glxgears application on the Dragonboard 802c with the latest 5.15 git checkin “0360da900530a arm64: dtsi: qcom: apq8096-db820c: enable GFX CPR device”. You can see in the attached file that the “gpu fault ring” occurred once. Close to that moment I was kicked out of the desktop view that I was logged into on the Dragonboard so I couldn’t tell if glxgears was still running or not. I reset the test and tried again, but got similar results (“gpu fault ring” and I was kicked out of desktop view).
Let me know what you think.
Thanks,
Kim
*From:* Paul Neuhardt <paul.neuhardt@linaro.org mailto:paul.neuhardt@linaro.org> *Sent:* Monday, October 10, 2022 12:50 AM *To:* sightlineapplications@lists.linaro.org mailto:sightlineapplications@lists.linaro.org *Subject:* [Sightlineapplications] Project Current Status and Completion
Hello All,
Over the past few weeks Dmitry made significant progress. We have asked him to focus his time and efforts almost exclusively on your work in order to complete all of what we agreed upon. During this push he has nearly completed the work with the Kryo and SPM regulators. Once those are done, he will complete the overall work by tying everything into the CPR3 driver.
This last push has consumed the remaining engineering time on the second PO you authorized, and we have not yet completed the work at hand. I've worked with Dmitry to get the best estimate possible on what it will take to complete the work, and we are looking at 8 engineering days. At the rate of $2,000 per day, that is an additional $16,000. Given that I have not expended all the PM time authorized in the two agreements already reached, I do not believe any more budget for project management will be necessary.
I know this is the second time we have come back after exhausting our estimates, and I can only apologize for that. Several items have turned out to be more complex than we had anticipated. But we are now very confident that we have an accurate estimate on the last push to complete the work for you. We understand how important this work is to your product line, and we are dedicated to getting the work completed at a high level of quality and in a way that will support your business.
Please let me know if you wish to continue with the work, and we will send an additional extension request for approval. Terms would be paid in 30 days as before, with work to resume immediately. I believe we should have another meeting to discuss where we go from here and the options for completing the work. I suggest 9:00 PDT on Tuesday, 11 October (5:00 pm BST, 6:00pm CET). Please let me know if that works for you, and if it does not when would be a good time.
Thank you.
Kind regards,
Paul Neuhardt
--
Image removed by sender. Linaro http://www.linaro.org/
*Paul Neuhardt*|/Sr. Program Manager/
T: +44 0771 377 8664 paul.neuhardt@linaro.org mailto:glen.valante@linaro.org IRC: pneuhardt
Sightlineapplications mailing list -- sightlineapplications@lists.linaro.org To unsubscribe send an email to sightlineapplications-leave@lists.linaro.org
-- With best wishes Dmitry