- Smart-dev - lists.linaro.org

Orange Pi 4 LTS single-board computer with RK3999 coming in February for $55 and up - Liliputing

by Anmar Oueja

https://liliputing.com/2022/01/orange-pi-4-lts-single-board-computer-with-r…

3 years, 1 month

1
0
0 0

RockPi4 Ledge RP - Camera enabled image

by Peter Griffin

Hi folks, I've added a ledge RP image with libcamera / camera enablement to the Wiki page here https://linaro.atlassian.net/wiki/spaces/SMART/overview README on how to flash and capture some frames here https://people.linaro.org/~peter.griffin/rockpi4b-ledge-camera/README.txt This may be useful for anyone who wants to quickly evaluate that their boad and camera sensor is working, and also generate any test images etc. Thanks, Peter.

3 years, 1 month

1
0
0 0

Re: smart camera apps

by Peter Griffin

Hi Maxim, On Tue, 11 Jan 2022 at 08:57, Maxim Uvarov <maxim.uvarov(a)linaro.org> wrote: > On Tue, 11 Jan 2022 at 11:32, Peter Griffin <peter.griffin(a)linaro.org> > wrote: > > > > Hi Maxim, > > > > (adding smart-dev ml to CC as per Anmars request) > > > > @Mike / Tom see below about md5sums now matching but image still failing > to boot. Sorry I accidentally dropped you off cc. > > > > @Maxim > > I actually got sent two RockPi 4 boards by mistake, so I just tried the > image on the second board I have, unfortunately I still get the same issue. > So it seems unlikely to be an issue with my board. Also I had debian image > booting into a graphical environment when I first got the board ok. > > > > With the u-boot EFI boot stuff, what env variable do I need to update to > get earlyprintk or similar enabled? > > > > EFI partition has /extlinux/exlinux.conf you can specify additional > kernel parameters there, right after initrd=. You can try dtb from > debian, maybe it will boot your board. > Thanks. I've added earlycon=uart8250,mmio32,0xff1a0000 earlyprintk Unfortunately that gets me 0 extra prints :( > Which version of the board do you have? Mine is Rock OI 4B v1.4 > Mine is Rock Pi 4 Model B OP1 v1.72 - so a later revision 4Gb of RAM > There is one small switch on the back side on my board and it's in the > left position. Closer to ethernet. > Thanks, I checked and the switch is in the same position. Peter. > > Maxim. > > > > > Thanks, > > > > Peter. > > > > On Mon, 10 Jan 2022 at 16:37, Peter Griffin <peter.griffin(a)linaro.org> > wrote: > >> > >> Hi Maxim, > >> > >> Unfortunately all the md5sum now match, but it still fails in the same > place :( > >> > >> The last few prints are as before > >> > >> Found /extlinux/extlinux.conf > >> Retrieving file: /extlinux/extlinux.conf > >> 1: Poky (Yocto Project Reference Distro) > >> Retrieving file: /ledge-initramfs.rootfs.cpio.gz > >> Retrieving file: /efi/boot/bootaa64.efi > >> append: root=UUID=6091b3a4-ce08-3020-93a6-f755a22ef03b rootwait > panic=60 console=ttyS2,1500000 > >> Retrieving file: /dtbs/rockchip/rk3399-rock-pi-4b.dtb > >> Moving Image from 0x2080000 to 0x2200000, end=4310000 > >> ## Flattened Device Tree blob at 01f00000 > >> Booting using the fdt blob at 0x1f00000 > >> > >> Then nothing more printed. I'm using serial console on 10,8 and 6 > (which is what the bootloader prints are going to). > >> > >> Does anyone else have a board who can try it? > >> > >> Pete. > >> > >> > >> On Mon, 10 Jan 2022 at 16:04, Maxim Uvarov <maxim.uvarov(a)linaro.org> > wrote: > >>> > >>> Uploaded with the same name. > >>> > >>> gzipped image md5 has to be: > >>> > >>> md5sum ledge-rockpi4b_sd.img.gz > >>> fddaa676e014a42d37f3d3e1111d70b5 ledge-rockpi4b_sd.img.gz > >>> > >>> On Mon, 10 Jan 2022 at 18:23, Peter Griffin <peter.griffin(a)linaro.org> > wrote: > >>> > > >>> > Hi Maxim, > >>> > > >>> > I guess the good news is the md5sum is different > >>> > > >>> > md5sum ledge-rockpi4b_sd.img > >>> > c6c50a326f99355f8a323d720def4dd9 ledge-rockpi4b_sd.img > >>> > > >>> > Where can I get the working image from? > >>> > > >>> > Thanks, > >>> > > >>> > Peter. > >>> > > >>> > On Mon, 10 Jan 2022 at 14:31, Maxim Uvarov <maxim.uvarov(a)linaro.org> > wrote: > >>> >> > >>> >> Peter, > >>> >> > >>> >> Image boots for me: > >>> >> > >>> >> 1. cat ledge-rockpi4b_sd.img > /dev/sdb > >>> >> 2. then boot. > >>> >> I attached a boot log. > >>> >> md5sum ledge-rockpi4b_sd.img > >>> >> bdbed269fd8dda5c1013265f2bc2e28a ledge-rockpi4b_sd.img > >>> >> > >>> >> Do you use serial cable on pins 10,8 and 6? (Maybe you are looking > >>> >> for a different console...). > >>> >> > >>> >> > >>> >> > >>> >> > >>> >> > >>> >> On Mon, 10 Jan 2022 at 15:36, Peter Griffin < > peter.griffin(a)linaro.org> wrote: > >>> >> > > >>> >> > Hi Maxim, > >>> >> > > >>> >> > On Mon, 10 Jan 2022 at 12:18, Maxim Uvarov < > maxim.uvarov(a)linaro.org> wrote: > >>> >> >> > >>> >> >> On Mon, 10 Jan 2022 at 14:41, Peter Griffin < > peter.griffin(a)linaro.org> wrote: > >>> >> >> > > >>> >> >> > Hi Maxim, > >>> >> >> > > >>> >> >> > On Mon, 10 Jan 2022 at 10:44, Maxim Uvarov < > maxim.uvarov(a)linaro.org> wrote: > >>> >> >> >> > >>> >> >> >> Hello Peter, > >>> >> >> >> > >>> >> >> >> Are there any additional applications which I need to add to > LEDGE RP > >>> >> >> >> for the smart camera project? > >>> >> >> >> > >>> >> >> >> I updated wiki with an SD card image for Rock PI. Were you > able to run it? > >>> >> >> > > >>> >> >> > > >>> >> >> > U-Boot & TF-A all boot OK, but I don't get any uart output > from the kernel. > >>> >> >> > See log below > >>> >> >> > > >>> >> >> > U-Boot TPL 2022.01-rc4 (Dec 20 2021 - 16:15:15) > >>> >> >> > Channel 0: LPDDR4, 50MHz > >>> >> >> > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 > Size=2048MB > >>> >> >> > Channel 1: LPDDR4, 50MHz > >>> >> >> > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 > Size=2048MB > >>> >> >> > 256B stride > >>> >> >> > lpddr4_set_rate: change freq to 400000000 mhz 0, 1 > >>> >> >> > lpddr4_set_rate: change freq to 800000000 mhz 1, 0 > >>> >> >> > Trying to boot from BOOTROM > >>> >> >> > Returning to boot ROM... > >>> >> >> > > >>> >> >> > U-Boot SPL 2022.01-rc4 (Dec 20 2021 - 16:15:15 +0000) > >>> >> >> > Trying to boot from MMC2 > >>> >> >> > > >>> >> >> > > >>> >> >> > U-Boot 2022.01-rc4 (Dec 20 2021 - 16:15:15 +0000) > >>> >> >> > > >>> >> >> > SoC: Rockchip rk3399 > >>> >> >> > Reset cause: POR > >>> >> >> > Model: Radxa ROCK Pi 4B > >>> >> >> > DRAM: 3.9 GiB > >>> >> >> > PMIC: RK808 > >>> >> >> > MMC: mmc@fe310000: 2, mmc@fe320000: 1, mmc@fe330000: 0 > >>> >> >> > Loading Environment from SPIFlash... Invalid bus 1 (err=-19) > >>> >> >> > *** Warning - spi_flash_probe_bus_cs() failed, using default > environment > >>> >> >> > > >>> >> >> > In: serial > >>> >> >> > Out: serial > >>> >> >> > Err: serial > >>> >> >> > Model: Radxa ROCK Pi 4B > >>> >> >> > Net: eth0: ethernet@fe300000 > >>> >> >> > starting USB... > >>> >> >> > Bus usb@fe380000: USB EHCI 1.00 > >>> >> >> > Bus usb@fe3a0000: USB OHCI 1.0 > >>> >> >> > Bus usb@fe3c0000: USB EHCI 1.00 > >>> >> >> > Bus usb@fe3e0000: USB OHCI 1.0 > >>> >> >> > Bus usb@fe800000: Register 2000140 NbrPorts 2 > >>> >> >> > Starting the controller > >>> >> >> > USB XHCI 1.10 > >>> >> >> > Bus usb@fe900000: Register 2000140 NbrPorts 2 > >>> >> >> > Starting the controller > >>> >> >> > USB XHCI 1.10 > >>> >> >> > scanning bus usb@fe380000 for devices... 1 USB Device(s) found > >>> >> >> > scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found > >>> >> >> > scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found > >>> >> >> > scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found > >>> >> >> > scanning bus usb@fe800000 for devices... 1 USB Device(s) found > >>> >> >> > scanning bus usb@fe900000 for devices... 1 USB Device(s) found > >>> >> >> > scanning usb for storage devices... 0 Storage Device(s) > found > >>> >> >> > Hit any key to stop autoboot: 0 > >>> >> >> > switch to partitions #0, OK > >>> >> >> > mmc1 is current device > >>> >> >> > Scanning mmc 1:2... > >>> >> >> > Found /extlinux/extlinux.conf > >>> >> >> > Retrieving file: /extlinux/extlinux.conf > >>> >> >> > 1: Poky (Yocto Project Reference Distro) > >>> >> >> > Retrieving file: /ledge-initramfs.rootfs.cpio.gz > >>> >> >> > Retrieving file: /efi/boot/bootaa64.efi > >>> >> >> > append: root=UUID=6091b3a4-ce08-3020-93a6-f755a22ef03b > rootwait panic=60 console=ttyS2,1500000 > >>> >> >> > Retrieving file: /dtbs/rockchip/rk3399-rock-pi-4b.dtb > >>> >> >> > Moving Image from 0x2080000 to 0x2200000, end=4310000 > >>> >> >> > ## Flattened Device Tree blob at 01f00000 > >>> >> >> > Booting using the fdt blob at 0x1f00000 > >>> >> >> > > >>> >> >> > No further prints after that > >>> >> >> > > >>> >> >> > >>> >> >> Hm, that is interesting. I see kernel boot messages and can > login to > >>> >> >> the board. I will think about where there might be differences... > >>> >> > > >>> >> > > >>> >> > Ok thanks :) BTW this is the output from the image hosted here > >>> >> > https://people.linaro.org/~maxim.uvarov/ledge-rockpi4b_sd.img.gz > >>> >> > > >>> >> > Let me know if there is some other image you want me to try. > >>> >> > > >>> >> > Thanks, > >>> >> > > >>> >> > Peter > >>> >> >> > >>> >> >> > >>> >> >> > Peter. > >>> >> >> > > >>> >> >> >> >

3 years, 1 month

2
5
0 0

meta-ts patches

by Peter Griffin

Hi Maxim and Ilias, Can you apply the following 2 patches on meta-ts repo for me, it fixes board stability issues on rockpi 4 boards. Thanks, Peter.

3 years, 1 month

1
0
0 0

Re: smart camera apps

by Peter Griffin

Hi Maxim, (adding smart-dev ml to CC as per Anmars request) @Mike / Tom see below about md5sums now matching but image still failing to boot. Sorry I accidentally dropped you off cc. @Maxim I actually got sent two RockPi 4 boards by mistake, so I just tried the image on the second board I have, unfortunately I still get the same issue. So it seems unlikely to be an issue with my board. Also I had debian image booting into a graphical environment when I first got the board ok. With the u-boot EFI boot stuff, what env variable do I need to update to get earlyprintk or similar enabled? Thanks, Peter. On Mon, 10 Jan 2022 at 16:37, Peter Griffin <peter.griffin(a)linaro.org> wrote: > Hi Maxim, > > Unfortunately all the md5sum now match, but it still fails in the same > place :( > > The last few prints are as before > > Found /extlinux/extlinux.conf > Retrieving file: /extlinux/extlinux.conf > 1: Poky (Yocto Project Reference Distro) > Retrieving file: /ledge-initramfs.rootfs.cpio.gz > Retrieving file: /efi/boot/bootaa64.efi > append: root=UUID=6091b3a4-ce08-3020-93a6-f755a22ef03b rootwait panic=60 > console=ttyS2,1500000 > Retrieving file: /dtbs/rockchip/rk3399-rock-pi-4b.dtb > Moving Image from 0x2080000 to 0x2200000, end=4310000 > ## Flattened Device Tree blob at 01f00000 > Booting using the fdt blob at 0x1f00000 > > Then nothing more printed. I'm using serial console on 10,8 and 6 (which > is what the bootloader prints are going to). > > Does anyone else have a board who can try it? > > Pete. > > > On Mon, 10 Jan 2022 at 16:04, Maxim Uvarov <maxim.uvarov(a)linaro.org> > wrote: > >> Uploaded with the same name. >> >> gzipped image md5 has to be: >> >> md5sum ledge-rockpi4b_sd.img.gz >> fddaa676e014a42d37f3d3e1111d70b5 ledge-rockpi4b_sd.img.gz >> >> On Mon, 10 Jan 2022 at 18:23, Peter Griffin <peter.griffin(a)linaro.org> >> wrote: >> > >> > Hi Maxim, >> > >> > I guess the good news is the md5sum is different >> > >> > md5sum ledge-rockpi4b_sd.img >> > c6c50a326f99355f8a323d720def4dd9 ledge-rockpi4b_sd.img >> > >> > Where can I get the working image from? >> > >> > Thanks, >> > >> > Peter. >> > >> > On Mon, 10 Jan 2022 at 14:31, Maxim Uvarov <maxim.uvarov(a)linaro.org> >> wrote: >> >> >> >> Peter, >> >> >> >> Image boots for me: >> >> >> >> 1. cat ledge-rockpi4b_sd.img > /dev/sdb >> >> 2. then boot. >> >> I attached a boot log. >> >> md5sum ledge-rockpi4b_sd.img >> >> bdbed269fd8dda5c1013265f2bc2e28a ledge-rockpi4b_sd.img >> >> >> >> Do you use serial cable on pins 10,8 and 6? (Maybe you are looking >> >> for a different console...). >> >> >> >> >> >> >> >> >> >> >> >> On Mon, 10 Jan 2022 at 15:36, Peter Griffin <peter.griffin(a)linaro.org> >> wrote: >> >> > >> >> > Hi Maxim, >> >> > >> >> > On Mon, 10 Jan 2022 at 12:18, Maxim Uvarov <maxim.uvarov(a)linaro.org> >> wrote: >> >> >> >> >> >> On Mon, 10 Jan 2022 at 14:41, Peter Griffin < >> peter.griffin(a)linaro.org> wrote: >> >> >> > >> >> >> > Hi Maxim, >> >> >> > >> >> >> > On Mon, 10 Jan 2022 at 10:44, Maxim Uvarov < >> maxim.uvarov(a)linaro.org> wrote: >> >> >> >> >> >> >> >> Hello Peter, >> >> >> >> >> >> >> >> Are there any additional applications which I need to add to >> LEDGE RP >> >> >> >> for the smart camera project? >> >> >> >> >> >> >> >> I updated wiki with an SD card image for Rock PI. Were you able >> to run it? >> >> >> > >> >> >> > >> >> >> > U-Boot & TF-A all boot OK, but I don't get any uart output from >> the kernel. >> >> >> > See log below >> >> >> > >> >> >> > U-Boot TPL 2022.01-rc4 (Dec 20 2021 - 16:15:15) >> >> >> > Channel 0: LPDDR4, 50MHz >> >> >> > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB >> >> >> > Channel 1: LPDDR4, 50MHz >> >> >> > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB >> >> >> > 256B stride >> >> >> > lpddr4_set_rate: change freq to 400000000 mhz 0, 1 >> >> >> > lpddr4_set_rate: change freq to 800000000 mhz 1, 0 >> >> >> > Trying to boot from BOOTROM >> >> >> > Returning to boot ROM... >> >> >> > >> >> >> > U-Boot SPL 2022.01-rc4 (Dec 20 2021 - 16:15:15 +0000) >> >> >> > Trying to boot from MMC2 >> >> >> > >> >> >> > >> >> >> > U-Boot 2022.01-rc4 (Dec 20 2021 - 16:15:15 +0000) >> >> >> > >> >> >> > SoC: Rockchip rk3399 >> >> >> > Reset cause: POR >> >> >> > Model: Radxa ROCK Pi 4B >> >> >> > DRAM: 3.9 GiB >> >> >> > PMIC: RK808 >> >> >> > MMC: mmc@fe310000: 2, mmc@fe320000: 1, mmc@fe330000: 0 >> >> >> > Loading Environment from SPIFlash... Invalid bus 1 (err=-19) >> >> >> > *** Warning - spi_flash_probe_bus_cs() failed, using default >> environment >> >> >> > >> >> >> > In: serial >> >> >> > Out: serial >> >> >> > Err: serial >> >> >> > Model: Radxa ROCK Pi 4B >> >> >> > Net: eth0: ethernet@fe300000 >> >> >> > starting USB... >> >> >> > Bus usb@fe380000: USB EHCI 1.00 >> >> >> > Bus usb@fe3a0000: USB OHCI 1.0 >> >> >> > Bus usb@fe3c0000: USB EHCI 1.00 >> >> >> > Bus usb@fe3e0000: USB OHCI 1.0 >> >> >> > Bus usb@fe800000: Register 2000140 NbrPorts 2 >> >> >> > Starting the controller >> >> >> > USB XHCI 1.10 >> >> >> > Bus usb@fe900000: Register 2000140 NbrPorts 2 >> >> >> > Starting the controller >> >> >> > USB XHCI 1.10 >> >> >> > scanning bus usb@fe380000 for devices... 1 USB Device(s) found >> >> >> > scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found >> >> >> > scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found >> >> >> > scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found >> >> >> > scanning bus usb@fe800000 for devices... 1 USB Device(s) found >> >> >> > scanning bus usb@fe900000 for devices... 1 USB Device(s) found >> >> >> > scanning usb for storage devices... 0 Storage Device(s) >> found >> >> >> > Hit any key to stop autoboot: 0 >> >> >> > switch to partitions #0, OK >> >> >> > mmc1 is current device >> >> >> > Scanning mmc 1:2... >> >> >> > Found /extlinux/extlinux.conf >> >> >> > Retrieving file: /extlinux/extlinux.conf >> >> >> > 1: Poky (Yocto Project Reference Distro) >> >> >> > Retrieving file: /ledge-initramfs.rootfs.cpio.gz >> >> >> > Retrieving file: /efi/boot/bootaa64.efi >> >> >> > append: root=UUID=6091b3a4-ce08-3020-93a6-f755a22ef03b rootwait >> panic=60 console=ttyS2,1500000 >> >> >> > Retrieving file: /dtbs/rockchip/rk3399-rock-pi-4b.dtb >> >> >> > Moving Image from 0x2080000 to 0x2200000, end=4310000 >> >> >> > ## Flattened Device Tree blob at 01f00000 >> >> >> > Booting using the fdt blob at 0x1f00000 >> >> >> > >> >> >> > No further prints after that >> >> >> > >> >> >> >> >> >> Hm, that is interesting. I see kernel boot messages and can login to >> >> >> the board. I will think about where there might be differences... >> >> > >> >> > >> >> > Ok thanks :) BTW this is the output from the image hosted here >> >> > https://people.linaro.org/~maxim.uvarov/ledge-rockpi4b_sd.img.gz >> >> > >> >> > Let me know if there is some other image you want me to try. >> >> > >> >> > Thanks, >> >> > >> >> > Peter >> >> >> >> >> >> >> >> >> > Peter. >> >> >> > >> >> >> >> >> >

3 years, 2 months

1
0
0 0

SMART Project in 2022

by Anmar Oueja

Hello all, We now have a weekly 30 min call (starting tomorrow) to help us organize. Can you please have a look at your jira issues and make sure they are up to date. The active sprint is here: https://linaro.atlassian.net/jira/software/c/projects/SMART/boards/136 We only have 30 minutes and I like us to plan the next two weeks if possible so I went ahead and created Sprint 2 (not started it yet) so you can drag and drop any items you want to tackle for the next two weeks. If an item is missing, feel free to create it under the proper Epic. https://linaro.atlassian.net/jira/software/c/projects/SMART/boards/136/back… BTW, please use this ML for all team/project comms to make sure we are all up to date. Cheers! anmar

3 years, 2 months

1
0
0 0

LEDGE RP on RaspberryPi 4 status

by Anmar Oueja

Hello Everyone, Anybody knows if LEDGE-RP supports Raspberry Pi4? anmar

3 years, 2 months

2
1
0 0

2025

2024

2023

2022

2021

Smart-dev