Linaro-acpi January 2015

linaro-acpi@lists.linaro.org

42 participants
26 discussions

by G Gregory

Hi, I intend to import Andre's SBSA UART patches to leg-kernel in the next release and remove my hack SBSA UART driver. This will mean your console will change to be ttyAMA0. If you are using the FVP model it must have these two arguments. -C bp.pl011_uart0.untimed_fifos=1 -C bp.pl011_uart0.revision="r1p5" Thanks Graeme

9 years, 3 months

[RFC PATCH 0/5] Have the kernel identify itself properly to ACPI

by al.stone＠linaro.org

From: Al Stone <ahs3(a)redhat.com> The use of the ACPI _OSI method in Linux has a long and sordid history. Instead of perpetuating the complications on new architectures, the consensus appears to be to deprecate the use of _OSI. I will be proposing such a change to the ACPI specification in the near future. These patches rearrange the implementation of _OSI so that it can be deprecated on arm64 platforms. For x86, there should be no change in functionality. For ia64, there is no longer any connection to the ACPI blacklist code that is only used by x86. For arm64, any use of the _OSI method generates a warning that it has been deprecated, and then always returns false; i.e., that the capability being queried for, whether OS name or functionality, is not supported. This is the first four of the patches. The final patch changes the _OS method for arm64 only. Since there is no need to pretend to be older versions of Windows, or any other OS, the _OS method will return "Linux" on arm64. I have only done simple boot testing with these patches on arm64 and x86 (AMD Seattle and a Lenovo t440s ThinkPad, respectively). Things seem to work as they should, but this is a very small sample of possible machines. The ia64 patches compile, but I have no way to test them. These patches also rely on having already applied Hanjun's patches for ACPI 5.1 on arm64 [0]. The x86 and ia64 parts are not dependent on that patch set, though, and could be used independently. [0] https://lkml.org/lkml/2015/1/14/586 Al Stone (4): ia64: ACPI: move kernel acpi files to a directory arm64: ACPI: move kernel acpi files to a directory ACPI: arm64/x86/ia64: make acpi_osi_handler() arch-dependent ACPI: x86/ia64/arm64: move _OSI support functions to arch-dependent locations Hanjun Guo (1): ACPI: use Linux as ACPI_OS_NAME for _OS on ARM64 arch/arm64/Kconfig | 1 + arch/arm64/kernel/Makefile | 2 +- arch/arm64/kernel/acpi.c | 359 -------------- arch/arm64/kernel/acpi/Makefile | 1 + arch/arm64/kernel/acpi/acpi.c | 359 ++++++++++++++ arch/arm64/kernel/acpi/osi.c | 26 + arch/ia64/kernel/Makefile | 2 +- arch/ia64/kernel/acpi-ext.c | 104 ---- arch/ia64/kernel/acpi.c | 1000 -------------------------------------- arch/ia64/kernel/acpi/Makefile | 1 + arch/ia64/kernel/acpi/acpi-ext.c | 104 ++++ arch/ia64/kernel/acpi/acpi.c | 1000 ++++++++++++++++++++++++++++++++++++++ arch/ia64/kernel/acpi/osi.c | 119 +++++ arch/x86/kernel/acpi/Makefile | 2 +- arch/x86/kernel/acpi/blacklist.c | 327 +++++++++++++ arch/x86/kernel/acpi/boot.c | 5 +- arch/x86/kernel/acpi/osi.c | 255 ++++++++++ drivers/acpi/Kconfig | 8 + drivers/acpi/Makefile | 1 - drivers/acpi/blacklist.c | 323 ------------ drivers/acpi/osl.c | 217 --------- include/acpi/acconfig.h | 2 + include/acpi/platform/aclinux.h | 4 + include/linux/acpi.h | 4 +- 24 files changed, 2215 insertions(+), 2011 deletions(-) delete mode 100644 arch/arm64/kernel/acpi.c create mode 100644 arch/arm64/kernel/acpi/Makefile create mode 100644 arch/arm64/kernel/acpi/acpi.c create mode 100644 arch/arm64/kernel/acpi/osi.c delete mode 100644 arch/ia64/kernel/acpi-ext.c delete mode 100644 arch/ia64/kernel/acpi.c create mode 100644 arch/ia64/kernel/acpi/Makefile create mode 100644 arch/ia64/kernel/acpi/acpi-ext.c create mode 100644 arch/ia64/kernel/acpi/acpi.c create mode 100644 arch/ia64/kernel/acpi/osi.c create mode 100644 arch/x86/kernel/acpi/blacklist.c create mode 100644 arch/x86/kernel/acpi/osi.c delete mode 100644 drivers/acpi/blacklist.c -- 2.1.0

9 years, 3 months

[PATCH] arm64: ACPI: additions and editing of ACPI documentation for arm64

by al.stone＠linaro.org

From: Al Stone <ahs3(a)redhat.com> While Hanjun cleaned up most of the commentary on the arm-acpi.txt file, this patch goes several steps further. The biggest change to the existing documentation was to add a section describing why ACPI is wanted, and to do a lot of editing for continuity, and hopefully clarity. Two documentation files are also being added: (1) A verbatim copy of the "Why ACPI on ARM?" blog posting by Grant Likely, which is also summarized in arm-acpi.txt, and (2) A section by section review of the ACPI spec (acpi_object_usage.txt) to note recommendations and prohibitions on the use of the numerous ACPI tables and objects. This sets out the current expectations of the firmware by Linux very explicitly (or as explicitly as I can, for now). Signed-off-by: Al Stone <al.stone(a)linaro.org> --- Documentation/arm64/acpi_object_usage.txt | 557 ++++++++++++++++++++++++++++++ Documentation/arm64/why_use_acpi.txt | 228 ++++++++++++ 2 files changed, 785 insertions(+) create mode 100644 Documentation/arm64/acpi_object_usage.txt create mode 100644 Documentation/arm64/why_use_acpi.txt diff --git a/Documentation/arm64/acpi_object_usage.txt b/Documentation/arm64/acpi_object_usage.txt new file mode 100644 index 0000000..3fbc25d --- /dev/null +++ b/Documentation/arm64/acpi_object_usage.txt @@ -0,0 +1,557 @@ +ACPI Tables +----------- +The expectations of individual ACPI tables are discussed in the list that +follows. + +If a section number is used, it refers to a section number in the ACPI +specification where the object is defined. If "Signature Reserved" is used, +the table signature (the first four bytes of the table) is the only portion +of the table recognized by the specification, and the actual table is defined +outside of the UEFI Forum (see Section 5.2.6 of the specification). + + +Table Usage for ARMv8 Linux +----- ---------------------------------------------------------------- +BERT Section 18.3 (signature == "BERT") + == Boot Error Record Table == + Must be supplied if RAS support is provided by the platform. It + is recommended this table be supplied. + +BOOT Signature Reserved (signature == "BOOT") + == simple BOOT flag table == + Microsoft only table, will not be supported. + +BGRT Section 5.2.22 (signature == "BGRT") + == Boot Graphics Resource Table == + Optional, not currently supported, with no real use-case for an + ARM server. + +CPEP Section 5.2.18 (signature == "CPEP") + == Corrected Platform Error Polling table == + Optional, not currently supported, and not recommended until such + time as ARM-compatible hardware is available, and the specification + suitably modified. + +CSRT Signature Reserved (signature == "CSRT") + == Core System Resources Table == + Optional, not currently supported. + +DBG2 Signature Reserved (signature == "DBG2") + == DeBuG port table 2 == + Microsoft only table, will not be supported. + +DBGP Signature Reserved (signature == "DBGP") + == DeBuG Port table == + Microsoft only table, will not be supported. + +DSDT Section 5.2.11.1 (signature == "DSDT") + == Differentiated System Description Table == + At least one DSDT is required; more than one can be provided to + expand the ACPI namespace. + +DMAR Signature Reserved (signature == "DMAR") + == DMA Remapping table == + x86 only table, will not be supported. + +DRTM Signature Reserved (signature == "DRTM") + == Dynamic Root of Trust for Measurement table == + Optional, not currently supported. + +ECDT Section 5.2.16 (signature == "ECDT") + == Embedded Controller Description Table == + Optional, not currently supported, but could be used on ARM if and + only if one uses the GPE_BIT field to represent an IRQ number, since + there are no GPE blocks defined in hardware reduced mode. This would + need to be modified in the ACPI specification. + +EINJ Section 18.6 (signature == "EINJ") + == Error Injection table == + This table is very useful for testing platform response to error + conditions; it allows one to inject an error into the system as + if it had actually occurred. However, this table should not be + shipped with a production system; it should be dynamically loaded + and executed with the ACPICA tools only during testing. + +ERST Section 18.5 (signature == "ERST") + == Error Record Serialization Table == + Must be supplied if RAS support is provided by the platform. It + is recommended this table be supplied. + +ETDT Signature Reserved (signature == "ETDT") + == Event Timer Description Table == + Obsolete table, will not be supported. + +FACS Section 5.2.10 (signature == "FACS") + == Firmware ACPI Control Structure == + It is unlikely that this table will be terribly useful. If it is + provided, the Global Lock will NOT be used since it is not part of + the hardware reduced profile, and only 64-bit address fields will + be considered valid. + +FADT Section 5.2.9 (signature == "FACP") + == Fixed ACPI Description Table == + Required for arm64. + + The HW_REDUCED_ACPI flag must be set. All of the fields that are + to be ignored when HW_REDUCED_ACPI is set are expected to be set to + zero. + + If an FACS table is provided, the X_FIRMWARE_CTRL field is to be + used, not FIRMWARE_CTRL. + + If a DSDT is provided, the X_DSDT field is to be used, not the DSDT + field. + +FPDT Section 5.2.23 (signature == "FPDT") + == Firmware Performance Data Table == + Optional, not currently supported. + +GTDT Section 5.2.24 (signature == "GTDT") + == Generic Timer Description Table == + Required for arm64. + +HEST Section 18.3.2 (signature == "HEST") + == Hardware Error Source Table == + Until further error source types are defined, use only types 6 (AER + Root Port), 7 (AER Endpoint), 8 (AER Bridge), or 9 (Generic Hardware + Error Source). Firmware first error handling is possible if and only + if Trusted Firmware is being used on arm64. + + Must be supplied if RAS support is provided by the platform. It + is recommended this table be supplied. + +HPET Signature Reserved (signature == "HPET") + == High Precision Event timer Table == + x86 only table, will not be supported. + +IBFT Signature Reserved (signature == "IBFT") + == iSCSI Boot Firmware Table == + Microsoft defined table, support TBD. + +IVRS Signature Reserved (signature == "IVRS") + == I/O Virtualization Reporting Structure == + x86_64 (AMD) only table, will not be supported. + +LPIT Signature Reserved (signature == "LPIT") + == Low Power Idle Table == + x86 only table as of ACPI 5.1; future versions adapted for use + with ARM are optional, and will be supported. + +MADT Section 5.2.12 (signature == "APIC") + == Multiple APIC Description Table == + Only the GIC interrupt controller structures should be used (types + 0xA - 0xE). + +MCFG Signature Reserved (signature == "MCFG") + == Memory-mapped ConFiGuration space == + If the platform supports PCI/PCIe, an MCFG table is required. + +MCHI Signature Reserved (signature == "MCHI") + == Management Controller Host Interface table == + Optional, not currently supported. + +MPST Section 5.2.21 (signature == "MPST") + == Memory Power State Table == + Optional, not currently supported. + +MSDM Signature Reserved (signature == "MSDM") + == Microsoft Data Management table == + Microsoft only table, will not be supported. + +MSCT Section 5.2.19 (signature == "MSCT") + == Maximum System Characteristic Table == + Optional, not currently supported. + +RASF Section 5.2.20 (signature == "RASF") + == RAS Feature table == + Optional, not currently supported. + +RSDP Section 5.2.5 (signature == "RSD PTR") + == Root System Description PoinTeR == + Required for arm64. + +RSDT Section 5.2.7 (signature == "RSDT") + == Root System Description Table == + Deprecated on arm64; can only provide 32-bit addresses. + +SBST Section 5.2.14 (signature == "SBST") + == Smart Battery Subsystem Table == + Optional, not currently supported. + +SLIC Signature Reserved (signature == "SLIC") + == Software LIcensing table == + Microsoft only table, will not be supported. + +SLIT Section 5.2.17 (signature == "SLIT") + == System Locality distance Information Table == + Optional in general, but required for NUMA systems. + +SPCR Signature Reserved (signature == "SPCR") + == Serial Port Console Redirection table == + Required for arm64. + +SPMI Signature Reserved (signature == "SPMI") + == Server Platform Management Interface table == + Optional, not currently supported. + +SRAT Section 5.2.16 (signature == "SRAT") + == System Resource Affinity Table == + Optional, but if used, only the GICC Affinity structures are read. + +TCPA Signature Reserved (signature == "TCPA") + == Trusted Computing Platform Alliance table == + Optional, not currently supported, and may need changes to fully + interoperate with arm64. + +TPM2 Signature Reserved (signature == "TPM2") + == Trusted Platform Module 2 table == + Optional, not currently supported, and may need changes to fully + interoperate with arm64. + +UEFI Signature Reserved (signature == "UEFI") + == UEFI ACPI data table == + Optional, not currently supported. No known use case for arm64, + at present. + +WAET Signature Reserved (signature == "WAET") + == Windows ACPI Emulated devices Table == + Microsoft only table, will not be supported. + +WDAT Signature Reserved (signature == "WDAT") + == Watch Dog Action Table == + Microsoft only table, will not be supported. + +WDRT Signature Reserved (signature == "WDRT") + == Watch Dog Resource Table == + Microsoft only table, will not be supported. + +WPBT Signature Reserved (signature == "WPBT") + == Windows Platform Binary Table == + Microsoft only table, will not be supported. + +XSDT Section 5.2.8 (signature == "XSDT") + == eXtended System Description Table == + Required for arm64. + + +ACPI Objects +------------ +The expectations on individual ACPI objects are discussed in the list that +follows: + +Name Section Usage for ARMv8 Linux +---- ------------ ------------------------------------------------- +_ADR 6.1.1 Use as needed. + +_BBN 6.5.5 Use as needed; PCI-specific. + +_BDN 6.5.3 Optional; not likely to be used on arm64. + +_CCA 6.2.17 This method should be defined for all bus masters + on arm64. While cache coherency is assumed, making + it explicit ensures the kernel will set up DMA as + it should. + +_CDM 6.2.1 Optional, to be used only for processor devices. + +_CID 6.1.2 Use as needed. + +_CLS 6.1.3 Use as needed. + +_CRS 6.2.2 Required on arm64. + +_DCK 6.5.2 Optional; not likely to be used on arm64. + +_DDN 6.1.4 This field can be used for a device name. However, + it is meant for DOS device names (e.g., COM1), so be + careful of its use across OSes. + +_DEP 6.5.8 Use as needed. + +_DIS 6.2.3 Optional, for power management use. + +_DLM 5.7.5 Optional. + +_DMA 6.2.4 Optional. + +_DSD 6.2.5 To be used with caution. If this object is used, try + to use it within the constraints already defined by the + Device Properties UUID. Only in rare circumstances + should it be necessary to create a new _DSD UUID. + + In either case, submit the _DSD definition along with + any driver patches for discussion, especially when + device properties are used. A driver will not be + considered complete without a corresponding _DSD + description. Once approved by kernel maintainers, + the UUID or device properties must then be registered + with the UEFI Forum; this may cause some iteration as + more than one OS will be registering entries. + +_DSM Do not use this method. It is not standardized, the + return values are not well documented, and it is + currently a frequent source of error. + +_DSW 7.2.1 Use as needed; power management specific. + +_EDL 6.3.1 Optional. + +_EJD 6.3.2 Optional. + +_EJx 6.3.3 Optional. + +_FIX 6.2.7 x86 specific, not used on arm64. + +\_GL 5.7.1 This object is not to be used in hardware reduced + mode, and therefore should not be used on arm64. + +_GLK 6.5.7 This object requires a global lock be defined; there + is no global lock on arm64 since it runs in hardware + reduced mode. Hence, do not use this object on arm64. + +\_GPE 5.3.1 This namespace is for x86 use only. Do not use it + on arm64. + +_GSB 6.2.7 Optional. + +_HID 6.1.5 Use as needed. This is the primary object to use in + device probing, though _CID and _CLS may also be used. + +_HPP 6.2.8 Optional, PCI specific. + +_HPX 6.2.9 Optional, PCI specific. + +_HRV 6.1.6 Optional, use as needed to clarify device behavior; in + some cases, this may be easier to use than _DSD. + +_INI 6.5.1 Not required, but can be useful in setting up devices + when UEFI leaves them in a state that may not be what + the driver expects before it starts probing. + +_IRC 7.2.15 Use as needed; power management specific. + +_LCK 6.3.4 Optional. + +_MAT 6.2.10 Optional; see also the MADT. + +_MLS 6.1.7 Optional, but highly recommended for use in + internationalization. + +_OFF 7.1.2 It is recommended to define this method for any device + that can be turned on or off. + +_ON 7.1.3 It is recommended to define this method for any device + that can be turned on or off. + +\_OS 5.7.3 This method will return "Linux" by default (this is + the value of the macro ACPI_OS_NAME on Linux). The + command line parameter acpi_os=<string> can be used + to set it to some other value. + +_OSC 6.2.11 This method can be a global method in ACPI (i.e., + \_SB._OSC), or it may be associated with a specific + device (e.g., \_SB.DEV0._OSC), or both. When used + as a global method, only capabilities published in + the ACPI specification are allowed. When used as + a device-specifc method, the process described for + using _DSD MUST be used to create an _OSC definition; + out-of-process use of _OSC is not allowed. That is, + submit the device-specific _OSC usage description as + part of the kernel driver submission, get it approved + by the kernel community, then register it with the + UEFI Forum. + +\_OSI 5.7.2 Deprecated on ARM64. Any invocation of this method + will print a warning on the console and return false. + That is, as far as ACPI firmware is concerned, _OSI + cannot be used to determine what sort of system is + being used or what functionality is provided. The + _OSC method is to be used instead. + +_OST 6.3.5 Optional. + +_PDC 8.4.1 Deprecated, do not use on arm64. + +\_PIC 5.8.1 The method should not be used. On arm64, the only + interrupt model available is GIC. + +_PLD 6.1.8 Optional. + +\_PR 5.3.1 This namespace is for x86 use only on legacy systems. + Do not use it on arm64. + +_PRS 6.2.12 Optional. + +_PRT 6.2.13 Required as part of the definition of all PCI root + devices. + +_PRW 7.2.13 Use as needed; power management specific. + +_PRx 7.2.8-11 Use as needed; power management specific. If _PR0 is + defined, _PR3 must also be defined. + +_PSC 7.2.6 Use as needed; power management specific. + +_PSE 7.2.7 Use as needed; power management specific. + +_PSW 7.2.14 Use as needed; power management specific. + +_PSx 7.2.2-5 Use as needed; power management specific. If _PS0 is + defined, _PS3 must also be defined. If clocks or + regulators need adjusting to be consistent with power + usage, change them in these methods. + +\_PTS 7.3.1 Use as needed; power management specific. + +_PXM 6.2.14 Optional. + +_REG 6.5.4 Use as needed. + +\_REV 5.7.4 Always returns the latest version of ACPI supported. + +_RMV 6.3.6 Optional. + +\_SB 5.3.1 Required on arm64; all devices must be defined in this + namespace. + +_SEG 6.5.6 Use as needed; PCI-specific. + +\_SI 5.3.1, Optional. + 9.1 + +_SLI 6.2.15 Optional; recommended when SLIT table is in use. + +_STA 6.3.7, It is recommended to define this method for any device + 7.1.4 that can be turned on or off. + +_SRS 6.2.16 Optional; see also _PRS. + +_STR 6.1.10 Recommended for conveying device names to end users; + this is preferred over using _DDN. + +_SUB 6.1.9 Use as needed; _HID or _CID are preferred. + +_SUN 6.1.11 Optional. + +\_Sx 7.3.2 Use as needed; power management specific. + +_SxD 7.2.16-19 Use as needed; power management specific. + +_SxW 7.2.20-24 Use as needed; power management specific. + +_SWS 7.3.3 Use as needed; power management specific; this may + require specification changes for use on arm64. + +\_TTS 7.3.4 Use as needed; power management specific. + +\_TZ 5.3.1 Optional. + +_UID 6.1.12 Recommended for distinguishing devices of the same + class; define it if at all possible. + +\_WAK 7.3.5 Use as needed; power management specific. + + +ACPI Event Model +---------------- +Do not use GPE block devices; these are not supported in the hardware reduced +profile used by arm64. Since there are no GPE blocks defined for use on ARM +platforms, SCI or NMI like interrupts are used, along with GPIO-signaled +interrupts for creating system events. + + +ACPI Processor Control +---------------------- +Section 8 of the ACPI specification is currently undergoing change that +should be completed in the 6.0 version of the specification. Processor +performance control will be handled differently for arm64 at that point +in time. Processor aggregator devices (section 8.5) will not be used, +for example, but another similar mechanism instead. + +While UEFI constrains what we can say until the release of 6.0, it is +recommended that CPPC (8.4.5) be used as the primary model. This will +still be useful into the future. C-states and P-states will still be +provided, but most of the current design work appears to favor CPPC. + +Further, it is essential that the ARMv8 SoC provide a fully functional +implementation of PSCI; this will be the only mechanism supported by ACPI +to control CPU power state (including secondary CPU booting). + +More details will be provided on the release of the ACPI 6.0 specification. + + +ACPI System Address Map Interfaces +---------------------------------- +In Section 15 of the ACPI specification, several methods are mentioned as +possible mechanisms for conveying memory resource information to the kernel. +For arm64, we will only support UEFI for booting with ACPI, hence the UEFI +GetMemoryMap() boot service is the only mechanism that will be used. + + +ACPI Platform Error Interfaces (APEI) +------------------------------------- +The APEI tables supported are described above. + +APEI requires the equivalent of an SCI and an NMI on ARMv8. The SCI is used +to notify the OSPM of errors that have occurred but can be corrected and the +system can continue correct operation, even if possibly degraded. The NMI is +used to indicate fatal errors that cannot be corrected, and require immediate +attention. + +Since there is no direct equivalent of the x86 SCI or NMI, arm64 handles +these slightly differently. The SCI is handled as a normal GPIO-signaled +interrupt; given that these are corrected (or correctable) errors being +reported, this is sufficient. The NMI is emulated as the highest priority +GPIO-signaled interrupt possible. This implies some caution must be used +since there could be interrupts at higher privilege levels or even interrupts +at the same priority as the emulated NMI. In Linux, this should not be the +case but one should be aware it could happen. + + +ACPI Objects Not Supported on ARM64 +----------------------------------- +While this may change in the future, there are several classes of objects +that can be defined, but are not currently of general interest to ARM servers. + +These are not supported: + + -- Section 9.2: ambient light sensor devices + + -- Section 9.3: battery devices + + -- Section 9.4: lids (e.g., laptop lids) + + -- Section 9.8.2: IDE controllers + + -- Section 9.9: floppy controllers + + -- Section 9.10: GPE block devices + + -- Section 9.15: PC/AT RTC/CMOS devices + + -- Section 9.16: user presence detection devices + + -- Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT + + -- Section 9.18: time and alarm devices (see 9.15) + + +ACPI Objects Not Yet Implemented +-------------------------------- +While these objects have x86 equivalents, and they do make some sense in ARM +servers, there is either no hardware available at present, or in some cases +there may not yet be a non-ARM implementation. Hence, they are currently not +implemented though that may change in the future. + +Not yet implemented are: + + -- Section 10: power source and power meter devices + + -- Section 11: thermal management + + -- Section 12: embedded controllers interface + + -- Section 13: SMBus interfaces + + -- Section 17: NUMA support + diff --git a/Documentation/arm64/why_use_acpi.txt b/Documentation/arm64/why_use_acpi.txt new file mode 100644 index 0000000..480a9ad --- /dev/null +++ b/Documentation/arm64/why_use_acpi.txt @@ -0,0 +1,228 @@ +Why ACPI on ARM? [2] +-------------------- +Why are we doing ACPI on ARM? That question has been asked many times, but +we haven’t yet had a good summary of the most important reasons for wanting +ACPI on ARM. This article is an attempt to state the rationale clearly. + +During an email conversation late last year, Catalin Marinas asked for +a summary of exactly why we want ACPI on ARM, Dong Wei replied with the +following list: +> 1. Support multiple OSes, including Linux and Windows +> 2. Support device configurations +> 3. Support dynamic device configurations (hot add/removal) +> 4. Support hardware abstraction through control methods +> 5. Support power management +> 6. Support thermal management +> 7. Support RAS interfaces + +The above list is certainly true in that all of them need to be supported. +However, that list doesn’t give the rationale for choosing ACPI. We already +have DT mechanisms for doing most of the above, and can certainly create +new bindings for anything that is missing. So, if it isn’t an issue of +functionality, then how does ACPI differ from DT and why is ACPI a better +fit for general purpose ARM servers? + +The difference is in the support model. To explain what I mean, I’m first +going to expand on each of the items above and discuss the similarities and +differences between ACPI and DT. Then, with that as the groundwork, I’ll +discuss how ACPI is a better fit for the general purpose hardware support +model. + + +Device Configurations +--------------------- +2. Support device configurations +3. Support dynamic device configurations (hot add/removal) + +From day one, DT was about device configurations. There isn’t any significant +difference between ACPI & DT here. In fact, the majority of ACPI tables are +completely analogous to DT descriptions. With the exception of the DSDT and +SSDT tables, most ACPI tables are merely flat data used to describe hardware. + +DT platforms have also supported dynamic configuration and hotplug for years. +There isn’t a lot here that differentiates between ACPI and DT. The biggest +difference is that dynamic changes to the ACPI namespace can be triggered by +ACPI methods, whereas for DT changes are received as messages from firmware +and have been very much platform specific (e.g. IBM pSeries does this) + + +Power Management +---------------- +4. Support hardware abstraction through control methods +5. Support power management +6. Support thermal management + +Power, thermal, and clock management can all be dealt with as a group. ACPI +defines a power management model (OSPM) that both the platform and the OS +conform to. The OS implements the OSPM state machine, but the platform can +provide state change behaviour in the form of bytecode methods. Methods can +access hardware directly or hand off PM operations to a coprocessor. The OS +really doesn’t have to care about the details as long as the platform obeys +the rules of the OSPM model. + +With DT, the kernel has device drivers for each and every component in the +platform, and configures them using DT data. DT itself doesn’t have a PM model. +Rather the PM model is an implementation detail of the kernel. Device drivers +use DT data to decide how to handle PM state changes. We have clock, pinctrl, +and regulator frameworks in the kernel for working out runtime PM. However, +this only works when all the drivers and support code have been merged into +the kernel. When the kernel’s PM model doesn’t work for new hardware, then we +change the model. This works very well for mobile/embedded because the vendor +controls the kernel. We can change things when we need to, but we also struggle +with getting board support mainlined. + +This difference has a big impact when it comes to OS support. Engineers from +hardware vendors, Microsoft, and most vocally Red Hat have all told me bluntly +that rebuilding the kernel doesn’t work for enterprise OS support. Their model +is based around a fixed OS release that ideally boots out-of-the-box. It may +still need additional device drivers for specific peripherals/features, but +from a system view, the OS works. When additional drivers are provided +separately, those drivers fit within the existing OSPM model for power +management. This is where ACPI has a technical advantage over DT. The ACPI +OSPM model and it’s bytecode gives the HW vendors a level of abstraction +under their control, not the kernel’s. When the hardware behaves differently +from what the OS expects, the vendor is able to change the behaviour without +changing the HW or patching the OS. + +At this point you’d be right to point out that it is harder to get the whole +system working correctly when behaviour is split between the kernel and the +platform. The OS must trust that the platform doesn’t violate the OSPM model. +All manner of bad things happen if it does. That is exactly why the DT model +doesn’t encode behaviour: It is easier to make changes and fix bugs when +everything is within the same code base. We don’t need a platform/kernel +split when we can modify the kernel. + +However, the enterprise folks don’t have that luxury. The platform/kernel +split isn’t a design choice. It is a characteristic of the market. Hardware +and OS vendors each have their own product timetables, and they don’t line +up. The timeline for getting patches into the kernel and flowing through into +OS releases puts OS support far downstream from the actual release of hardware. +Hardware vendors simply cannot wait for OS support to come online to be able to +release their products. They need to be able to work with available releases, +and make their hardware behave in the way the OS expects. The advantage of ACPI +OSPM is that it defines behaviour and limits what the hardware is allowed to do +without involving the kernel. + +What remains is sorting out how we make sure everything works. How do we make +sure there is enough cross platform testing to ensure new hardware doesn’t +ship broken and that new OS releases don’t break on old hardware? Those are +the reasons why a UEFI/ACPI firmware summit is being organized, it’s why the +UEFI forum holds plugfests 3 times a year, and it is why we’re working on +FWTS and LuvOS. + + +Reliability, Availability & Serviceability (RAS) +------------------------------------------------ +7. Support RAS interfaces + +This isn’t a question of whether or not DT can support RAS. Of course it can. +Rather it is a matter of RAS bindings already existing for ACPI, including a +usage model. We’ve barely begun to explore this on DT. This item doesn’t make +ACPI technically superior to DT, but it certainly makes it more mature. + + +Multiplatform Support +--------------------- +1. Support multiple OSes, including Linux and Windows + +I’m tackling this item last because I think it is the most contentious for +those of us in the Linux world. I wanted to get the other issues out of the +way before addressing it. + +The separation between hardware vendors and OS vendors in the server market +is new for ARM. For the first time ARM hardware and OS release cycles are +completely decoupled from each other, and neither are expected to have specific +knowledge of the other (ie. the hardware vendor doesn’t control the choice of +OS). ARM and their partners want to create an ecosystem of independent OSes +and hardware platforms that don’t explicitly require the former to be ported +to the latter. + +Now, one could argue that Linux is driving the potential market for ARM +servers, and therefore Linux is the only thing that matters, but hardware +vendors don’t see it that way. For hardware vendors it is in their best +interest to support as wide a choice of OSes as possible in order to catch +the widest potential customer base. Even if the majority choose Linux, some +will choose BSD, some will choose Windows, and some will choose something +else. Whether or not we think this is foolish is beside the point; it isn’t +something we have influence over. + +During early ARM server planning meetings between ARM, its partners and other +industry representatives (myself included) we discussed this exact point. +Before us were two options, DT and ACPI. As one of the Linux people in the +room, I advised that ACPI’s closed governance model was a show stopper for +Linux and that DT is the working interface. Microsoft on the other hand made +it abundantly clear that ACPI was the only interface that they would support. +For their part, the hardware vendors stated the platform abstraction behaviour +of ACPI is a hard requirement for their support model and that they would not +close the door on either Linux or Windows. + +However, the one thing that all of us could agree on was that supporting +multiple interfaces doesn’t help anyone: It would require twice as much +effort on defining bindings (once for Linux-DT and once for Windows-ACPI) +and it would require firmware to describe everything twice. Eventually we +reached the compromise to use ACPI, but on the condition of opening the +governance process to give Linux engineers equal influence over the +specification. The fact that we now have a much better seat at the ACPI +table, for both ARM and x86, is a direct result of these early ARM server +negotiations. We are no longer second class citizens in the ACPI world and +are actually driving much of the recent development. + +I know that this line of thought is more about market forces rather than a +hard technical argument between ACPI and DT, but it is an equally significant +one. Agreeing on a single way of doing things is important. The ARM server +ecosystem is better for the agreement to use the same interface for all +operating systems. This is what is meant by standards compliant. The standard +is a codification of the mutually agreed interface. It provides confidence +that all vendors are using the same rules for interoperability. + + +Summary +------- +To summarize, here is the short form rationale for ACPI on ARM: + +-- ACPI’s bytecode allows the platform to encode behaviour. DT explicitly + does not support this. For hardware vendors, being able to encode behaviour + is an important tool for supporting operating system releases on new + hardware. + +-- ACPI’s OSPM defines a power management model that constrains what the + platform is allowed into a specific model while still having flexibility + in hardware design. + +-- For enterprise use-cases, ACPI has extablished bindings, such as for RAS, + which are used in production. DT does not. Yes, we can define those bindings + but doing so means ARM and x86 will use completely different code paths in + both firmware and the kernel. + +-- Choosing a single interface for platform/OS abstraction is important. It + is not reasonable to require vendors to implement both DT and ACPI if they + want to support multiple operating systems. Agreeing on a single interface + instead of being fragmented into per-OS interfaces makes for better + interoperability overall. + +-- The ACPI governance process works well and we’re at the same table as HW + vendors and other OS vendors. In fact, there is no longer any reason to + feel that ACPI is a Windows thing or that we are playing second fiddle to + Microsoft. The move of ACPI governance into the UEFI forum has significantly + opened up the processes, and currently, a large portion of the changes being + made to ACPI is being driven by Linux. + +At the beginning of this article I made the statement that the difference +is in the support model. For servers, responsibility for hardware behaviour +cannot be purely the domain of the kernel, but rather is split between the +platform and the kernel. ACPI frees the OS from needing to understand all +the minute details of the hardware so that the OS doesn’t need to be ported +to each and every device individually. It allows the hardware vendors to take +responsibility for PM behaviour without depending on an OS release cycle which +it is not under their control. + +ACPI is also important because hardware and OS vendors have already worked +out how to use it to support the general purpose ecosystem. The infrastructure +is in place, the bindings are in place, and the process is in place. DT does +exactly what we need it to when working with vertically integrated devices, +but we don’t have good processes for supporting what the server vendors need. +We could potentially get there with DT, but doing so doesn’t buy us anything. +ACPI already does what the hardware vendors need, Microsoft won’t collaborate +with us on DT, and the hardware vendors would still need to provide two +completely separate firmware interface; one for Linux and one for Windows. + -- 2.1.0

9 years, 3 months

[PATCH v6 00/17] Introduce ACPI for ARM64 based on ACPI 5.1

by Hanjun Guo

Hi, This is the sixth version of ACPI core patches for ARM64 based on ACPI 5.1. updates from v5: - fix the NULL pointer reference in cpu_get_ops() if PSCI is absent and NULL will passed, which found by Suravee when he was testing those patches on Seattle platform. I added his Tested-by for all those ACPI patches. - Rebased on 3.19-rc2 which ACPI table related patches already merged into 3.19 by Rafael, and remove the first patch in v5 which is not needed any more. - Add two cleanup patches to convert ACPI ID to physical ID to make the ACPI core looks more ARCH agnostic, those two patches were expected going into 3.19 but conflicted with IOAPIC hotplug patches so Rafael left them for 3.20. - updates to the doc about ACPI on ARM to address comments from Catalin, Timur, Ashwin. continue discussion will bw needed about this doc. - we did lots of work as Al pointed out in the "[RFC] ACPI on arm64 TODO List" thread [1], and we already make FWTS running on ARM64, thanks FuWei for doing that. Here is the test results for linaro leg kernel release test results: Test report for leg-20141215.0 (Revision: d37eefeb160cc9cc1db997031793723e317be7b7) This test Image comes from https://ci.linaro.org/job/linux-leg-fuwei The CI job Link: https://ci.linaro.org/job/linux-leg-fuwei/37/ Notes : All the tests ran on FVP base model in LAVA server : http://validation.linaro.org/ The startup.nsh boot test Link :https://validation.linaro.org/scheduler/job/222779 The ACPI test Link : https://validation.linaro.org/scheduler/job/222781 The results.log file Link : https://validation.linaro.org/dashboard/attachment/1267957/view The grub-install test Link : https://validation.linaro.org/scheduler/job/222780 and here is the *summary*: summary -SUM:77 passed, 6 failed, 2 warnings, 5 aborted, 186 skipped, 8 info only. summary -NLN: summary -SUM:Test Failure Summary summary -SEP:=========================================================================================== summary -NLN: summary -SUM:Critical failures: NONE summary -NLN: summary -SUM:High failures: 2 summary -SUM: uefirttime: Failed to get wakeup time with UEFI runtime service. summary -SUM: uefirttime: Failed to set wakeup time with UEFI runtime service. summary -NLN: summary -SUM:Medium failures: 5 summary -SUM: wakealarm: Could not find an RTC with an alarm ioctl() interface. summary -SUM: method: \_SB_.COM0._CID returned a string 'PL011' but it was not a valid PNP ID or a valid ACPI ID. summary -SUM: method: Object _PRS did not exist. summary -SUM: method: Object _PTS did not exist. summary -SUM: method: Object _WAK did not exist. summary -NLN: summary -SUM:Low failures: NONE summary -NLN: summary -SUM:Other failures: NONE summary -NLN: summary -SUM:Test |Pass |Fail |Abort|Warn |Skip |Info | summary -SUM:---------------+-----+-----+-----+-----+-----+-----+ summary -SUM:acpidump | | | | | | 1| summary -SUM:acpiinfo | | | | | | 3| summary -SUM:acpitables | 11| | | 1| | | summary -SUM:aspm | | | | | 1| | summary -SUM:checksum | 8| | | | | | summary -SUM:cpufreq | | | | 1| | | summary -SUM:crsdump | | | | | | | summary -SUM:gpedump | | | | | | | summary -SUM:hda_audio | | | | | 1| | summary -SUM:klog | 1| | | | | | summary -SUM:maxreadreq | | | | | | | summary -SUM:method | 29| 4| | | 173| | summary -SUM:oops | 2| | | | | | summary -SUM:plddump | | | | | | | summary -SUM:prsdump | | | | | | | summary -SUM:securebootcert | | | 1| | | | summary -SUM:syntaxcheck | 1| | | | | | summary -SUM:uefibootpath | 1| | | | | | summary -SUM:uefidump | | | | | | | summary -SUM:uefirtmisc | 2| | | | 10| | summary -SUM:uefirttime | 2| 2| | | | | summary -SUM:uefirtvariable | 20| | | | | | summary -SUM:uefivarinfo | | | | | | | summary -SUM:version | | | | | 1| 4| summary -SUM:wakealarm | | | 4| | | | summary -SUM:---------------+-----+-----+-----+-----+-----+-----+ summary -SUM:Total: | 77| 6| 5| 2| 186| 8| summary -SUM:---------------+-----+-----+-----+-----+-----+-----+ [1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/310921.… Thanks

9 years, 3 months

[RFC] additional editing for arm-acpi.txt

by Al Stone

So. What do you think of this version? I've tried to fill out some areas, clean up some others -- and it probably needs more. At one point, I broke this into a bunch of individual files, which made it easier to edit, but it does not flow very smoothly. Let me know if a bunch of small files would be preferred. Hanjun already got most of the edits from the commentary on list; this version is mostly trying to add more content... -- ciao, al ----------------------------------- Al Stone Software Engineer Linaro Enterprise Group al.stone(a)linaro.org -----------------------------------

9 years, 3 months

Re: [Linaro-acpi] [PATCH v7 17/17] Documentation: ACPI for ARM64

by ashwinc＠codeaurora.org

Hi Hanjun, > ---------- Forwarded message ---------- > From: Hanjun Guo <hanjun.guo(a)linaro.org> > Date: 14 January 2015 at 10:05 > Subject: [Linaro-acpi] [PATCH v7 17/17] Documentation: ACPI for ARM64 From: Graeme Gregory <graeme.gregory(a)linaro.org> > Add documentation for the guidelines of how to use ACPI > on ARM64. > Reviewed-by: Suravee Suthikulpanit <Suravee.Suthikulpanit(a)amd.com> Reviewed-by: Yi Li <phoenix.liyi(a)huawei.com> > Signed-off-by: Graeme Gregory <graeme.gregory(a)linaro.org> > Signed-off-by: Al Stone <al.stone(a)linaro.org> > Signed-off-by: Hanjun Guo <hanjun.guo(a)linaro.org> > --- > Documentation/arm64/arm-acpi.txt | 327 > +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 327 insertions(+) > create mode 100644 Documentation/arm64/arm-acpi.txt Thanks for including previous feedback. This version looks good to us. Reviewed-by: Ashwin Chaugule <ashwinc(a)codeaurora.org> Sign-offs on the other patches in this series should follow shortly. Thanks, Ashwin -- Qualcomm Innovation Center, Inc The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project --

9 years, 3 months

[PATCH v5 00/18] Introduce ACPI for ARM64 based on ACPI 5.1

by Hanjun Guo

ACPI 5.1 has some major changes for ARM platform and the following tables which are essential for ARM platforms: 1) MADT table updates for GIC v2/v3. 2) FADT updates for PSCI 3) GTDT for arch timer This patch set is the ARM64 ACPI core patches covered MADT, FADT and GTDT, platform board specific drivers are not covered by this patch set. We first introduce acpi.c and its related head file which are needed by ACPI core, and then get RSDP to extract all the ACPI boot-time tables. When all the boot-time tables (FADT, MADT, GTDT) are ready, then parse them to init the sytem when booted. Specifically, a) we use FADT to init PSCI and use PSCI to boot SMP; b) Use MADT for GIC init and SMP init; c) GTDT for arch timer init. This patch set is based on 3.17-rc4 and was tested by Graeme on Juno and FVP base model boot with ACPI only OK, if you want to test them, you can pull from acpi-5.1-v5 branch in leg/acpi repo: git://git.linaro.org/leg/acpi/acpi.git Updates since v4: - ACPI uasge doc for ARM64 was updated a lot by Al - Collect some ACKs from Grant, Olof, Mark - address some comments from Olof and Catalin since last version Updates since v3: - Compile out sleep.c on ARM64 when ACPI enabled - refactor the GIC init code to address the comments from Marc and Arnd - refactor the SMP init code to fix some logic problem when PSCI is not present, also address some of Grant and Lorenzo's comments - reorder the patch series and move ACPI table changes to the front of patch set - rebase on top of 3.17-rc4 Updates since v2: - Refactor the code to make SMP/PSCI init with less sperated init path by Tomasz - make ACPI depend on EXPERT - Address lots of comments from Catalin, Sudeep, Geoff - Add Juno device ACPI driver patches for review Updates since v1: - Set ACPI default off on ARM64 suggested by Olof; - Rebase the patch set on top of linux-next branch/linux-pm tree which includes the ACPICA for full ACPI 5.1 support. - Update the document as suggested; - Adress lots of comments from Mark, Sudeep, Randy, Naresh, Olof, Geoff and more... Al Stone (3): ARM64 / ACPI: Get RSDP and ACPI boot-time tables ARM64 / ACPI: Introduce early_param for "acpi" and pass acpi=force to enable ACPI ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 Ashwin Chaugule (1): ACPI / table: Add new function to get table entries Graeme Gregory (4): ARM64 / ACPI: Introduce sleep-arm.c ARM64 / ACPI: If we chose to boot from acpi then disable FDT ARM64 / ACPI: Enable ARM64 in Kconfig Documentation: ACPI for ARM64 Hanjun Guo (8): ARM64: Move the init of cpu_logical_map(0) before unflatten_device_tree() ARM64 / ACPI: Make PCI optional for ACPI on ARM64 ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init ACPI / table: Print GIC information when MADT is parsed ARM64 / ACPI: Parse MADT for SMP initialization ACPI / processor: Make it possible to get CPU hardware ID via GICC ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi ARM64 / ACPI: Parse GTDT to initialize arch timer Tomasz Nowicki (2): ACPI / table: Count matched and successfully parsed entries without specifying max entries ARM64 / ACPI: Add GICv2 specific ACPI boot support Documentation/arm64/arm-acpi.txt | 323 ++++++++++++++++++++++++++++++ Documentation/kernel-parameters.txt | 3 +- arch/arm64/Kconfig | 3 + arch/arm64/include/asm/acenv.h | 18 ++ arch/arm64/include/asm/acpi.h | 99 ++++++++++ arch/arm64/include/asm/cpu_ops.h | 1 + arch/arm64/include/asm/pci.h | 11 ++ arch/arm64/include/asm/psci.h | 3 +- arch/arm64/include/asm/smp.h | 5 +- arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/acpi.c | 356 ++++++++++++++++++++++++++++++++++ arch/arm64/kernel/cpu_ops.c | 4 +- arch/arm64/kernel/psci.c | 78 +++++--- arch/arm64/kernel/setup.c | 25 ++- arch/arm64/kernel/smp.c | 2 +- arch/arm64/kernel/time.c | 7 + drivers/acpi/Kconfig | 6 +- drivers/acpi/Makefile | 6 +- drivers/acpi/bus.c | 3 + drivers/acpi/internal.h | 5 + drivers/acpi/processor_core.c | 37 ++++ drivers/acpi/sleep-arm.c | 28 +++ drivers/acpi/tables.c | 115 +++++++++-- drivers/clocksource/arm_arch_timer.c | 117 +++++++++-- drivers/irqchip/irq-gic.c | 106 ++++++++++ drivers/irqchip/irqchip.c | 3 + include/linux/acpi.h | 5 + include/linux/clocksource.h | 6 + include/linux/irqchip/arm-gic-acpi.h | 31 +++ include/linux/pci.h | 37 +++- 30 files changed, 1353 insertions(+), 91 deletions(-) create mode 100644 Documentation/arm64/arm-acpi.txt create mode 100644 arch/arm64/include/asm/acenv.h create mode 100644 arch/arm64/include/asm/acpi.h create mode 100644 arch/arm64/include/asm/pci.h create mode 100644 arch/arm64/kernel/acpi.c create mode 100644 drivers/acpi/sleep-arm.c create mode 100644 include/linux/irqchip/arm-gic-acpi.h -- 1.7.9.5

9 years, 4 months

[RFC] ACPI on arm64 TODO List

by Al Stone

Back in September 2014, a meeting was held at Linaro Connect where we discussed what issues remained before the arm64 ACPI core patches could be merged into the kernel, creating the TODO list below. I should have published this list sooner; I got focused on trying to resolve some of the issues instead. We have made some progress on all of these items. But, I want to make sure we haven't missed something. Since this list was compiled by only the people in the room at Connect, it is probable we have. I, for one, do not yet claim omniscience. So, I want to ask the ARM and ACPI communities: -- Is this list correct? -- Is this list complete? Below is what we currently know about; very brief notes on status are included. The TL;DR versions of the TODO list and the current status can be found at: https://wiki.linaro.org/LEG/Engineering/Kernel/ACPI/CoreUpstreamNotes and I'll do my best to kept that up to date. Thanks. Any and all feedback is greatly appreciated. TODO List for ACPI on arm64: ============================ 1. Define how Aarch64 OS identifies itself to firmware. * Problem: * _OSI method is demonstrably unreliable. On x86 Linux claims to be Windows * Proposal to use _OSC method as replacement is complicated and creates an explosion of combinations * Solution: * Draft and propose OS identification rules to ABST and ASWG for inclusion in ACPI spec. * Draft and propose recommended practice for current ACPI 5.1 spec platforms. * Status: Little progress, still under investigation 2. Linux must choose DT booting by default when offered both ACPI and DT on arm64 * DONE 3. Linux UEFI/ACPI testing tools must be made available * Problem: * Hardware/Firmware vendors do not have tools to test Linux compatibility. * Common problems go undetected if not tested for. * Solution: * Port FWTS tool and LuvOS distribution to AArch64 * Make LuvOS images readily available * Require hardware vendors to actively test against old and new kernels. * Status: LuvOS and FWTS ported to arm64 and running; patches being mainlined; additional test cases being written. 4. Set clear expectations for those providing ACPI for use with Linux * Problem: * Hardware/Firmware vendors can and will create ACPI tables that cannot be used by Linux without some guidance * Kernel developers cannot determine whether the kernel or firmware is broken without knowing what the firmware should do * Solution: document the expectations, and iterate as needed. Enforce when we must. * Status: initial kernel text available; AMD has offered to make their guidance document generic; firmware summit planned for deeper discussions. 5. Demonstrate the ACPI core patches work * Problem: how can we be sure the patches work? * Solution: verify the patches on arm64 server platforms * Status: * ACPI core works on at least the Foundation model, Juno, APM Mustang, and AMD Seattle * FWTS results will be published as soon as possible 6. How does the kernel handle_DSD usage? * Problem: * _DSD defines key-value properties in the DT style. How do we ensure _DSD bindings are well defined? * How do we ensure DT and _DSD bindings remain consistent with each other? * Solution: public documentation for all bindings, and a process for defining them * Status: proposal to require patch authors to point at public binding documentation; kernel Documentation/devicetree/bindings remains the default if no other location exists; UEFI forum has set up a binding repository. 7. Why is ACPI required? * Problem: * arm64 maintainers still haven't been convinced that ACPI is necessary. * Why do hardware and OS vendors say ACPI is required? * Status: Al & Grant collecting statements from OEMs to be posted publicly early in the new year; firmware summit for broader discussion planned. 8. Platform support patches need review * Problem: the core Aarch64 patches have been reviewed and are in good shape, but there is not yet a good example of server platform support patches that use them. * Solution: Post *good* patches for multiple ACPI platforms * Status: first version for AMD Seattle has been posted to the public linaro-acpi mailing list for initial review (thanks, Arnd), refined versions to be posted to broader lists after a few iterations for basic cleanup -- ciao, al ----------------------------------- Al Stone Software Engineer Linaro Enterprise Group al.stone(a)linaro.org -----------------------------------

9 years, 4 months

leg-kernel tag leg-20150115.0 released

by Graeme Gregory

The leg-kernel release has been made and tagged as leg-20150115.0 This is based on mainline kernel v3.19-rc4 Repository : http://git.linaro.org/leg/acpi/leg-kernel.git Direct Link: https://git.linaro.org/leg/acpi/leg-kernel.git/commit/a9ea7890d410273c15758… Notes :- 1) This release only supports Juno/FVP until updated topics for Seattle and Mustang are available.

9 years, 4 months

[PATCH 0/2] Introduce ACPI support for ahci_platform driver

by Suravee Suthikulpanit

This patch series introduce ACPI support for non-PCI AHCI platform driver. Existing ACPI support for AHCI assumes the device controller is a PCI device. Also, since there is no ACPI _HID/_CID for generic AHCI controller, the driver could not use them for matching devices. Therefore, this patch introduces a mechanism for drivers to match devices using ACPI _CLS method. This patch series is rebased from: http://git.linaro.org/leg/acpi/acpi.git acpi-5.1-v6 This topic was discussed earlier here (as part of introducing support for AMD Seattle SATA controller): http://marc.info/?l=linux-arm-kernel&m=141083492521584&w=2 Changes from RFC (https://lkml.org/lkml/2014/12/17/446) * Remove #ifdef and make non-ACPI version of the acpi_match_device_cls as inline. (per Arnd) * Simplify logic to retrieve and evaluate _CLS handle. (per Hanjun) Suravee Suthikulpanit (2): ACPI / scan: Add support for ACPI _CLS device matching ata: ahci_platform: Add ACPI _CLS matching drivers/acpi/scan.c | 63 +++++++++++++++++++++++++++++++++++++++++ drivers/ata/Kconfig | 2 +- drivers/ata/ahci_platform.c | 3 ++ include/acpi/acnames.h | 1 + include/linux/acpi.h | 12 +++++++- include/linux/device.h | 1 + include/linux/mod_devicetable.h | 6 ++++ 7 files changed, 86 insertions(+), 2 deletions(-) -- 1.9.3

9 years, 4 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Linaro-acpi January 2015