Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is used, and then register device's gsi with the core IRQ subsystem.
acpi_register_gsi() is similar to DT based irq_of_parse_and_map(), since gsi is unique in the system, so use hwirq number directly for the mapping.
We are going to implement stacked domains when GICv2m, GICv3, ITS support are added.
CC: Marc Zyngier marc.zyngier@arm.com Originally-by: Amit Daniel Kachhap amit.daniel@samsung.com Tested-by: Suravee Suthikulpanit Suravee.Suthikulpanit@amd.com Tested-by: Yijing Wang wangyijing@huawei.com Tested-by: Mark Langsdorf mlangsdo@redhat.com Tested-by: Jon Masters jcm@redhat.com Tested-by: Timur Tabi timur@codeaurora.org Tested-by: Robert Richter rrichter@cavium.com Acked-by: Robert Richter rrichter@cavium.com Signed-off-by: Hanjun Guo hanjun.guo@linaro.org --- arch/arm64/kernel/acpi.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/acpi/bus.c | 3 ++ include/linux/acpi.h | 1 + 3 files changed, 77 insertions(+)
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index 0f35d87..31f080e 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -76,6 +76,12 @@ static int __init dt_scan_depth1_nodes(unsigned long node, }
/* + * Since we're on ARM, the default interrupt routing model + * clearly has to be GIC. + */ +enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC; + +/* * __acpi_map_table() will be called before page_init(), so early_ioremap() * or early_memremap() should be called here to for ACPI table mapping. */ @@ -218,6 +224,73 @@ void __init acpi_init_cpus(void) pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus); }
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) +{ + *irq = irq_find_mapping(NULL, gsi); + + return 0; +} +EXPORT_SYMBOL_GPL(acpi_gsi_to_irq); + +/* + * success: return IRQ number (>0) + * failure: return =< 0 + */ +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) +{ + unsigned int irq; + unsigned int irq_type; + + /* + * ACPI have no bindings to indicate SPI or PPI, so we + * use different mappings from DT in ACPI. + * + * For FDT + * PPI interrupt: in the range [0, 15]; + * SPI interrupt: in the range [0, 987]; + * + * For ACPI, GSI should be unique so using + * the hwirq directly for the mapping: + * PPI interrupt: in the range [16, 31]; + * SPI interrupt: in the range [32, 1019]; + */ + + if (trigger == ACPI_EDGE_SENSITIVE && + polarity == ACPI_ACTIVE_LOW) + irq_type = IRQ_TYPE_EDGE_FALLING; + else if (trigger == ACPI_EDGE_SENSITIVE && + polarity == ACPI_ACTIVE_HIGH) + irq_type = IRQ_TYPE_EDGE_RISING; + else if (trigger == ACPI_LEVEL_SENSITIVE && + polarity == ACPI_ACTIVE_LOW) + irq_type = IRQ_TYPE_LEVEL_LOW; + else if (trigger == ACPI_LEVEL_SENSITIVE && + polarity == ACPI_ACTIVE_HIGH) + irq_type = IRQ_TYPE_LEVEL_HIGH; + else + irq_type = IRQ_TYPE_NONE; + + /* + * Since only one GIC is supported in ACPI 5.0, we can + * create mapping refer to the default domain + */ + irq = irq_create_mapping(NULL, gsi); + if (!irq) + return irq; + + /* Set irq type if specified and different than the current one */ + if (irq_type != IRQ_TYPE_NONE && + irq_type != irq_get_trigger_type(irq)) + irq_set_irq_type(irq, irq_type); + return irq; +} +EXPORT_SYMBOL_GPL(acpi_register_gsi); + +void acpi_unregister_gsi(u32 gsi) +{ +} +EXPORT_SYMBOL_GPL(acpi_unregister_gsi); + static int __init acpi_parse_fadt(struct acpi_table_header *table) { struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table; diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 8b67bd0..c412fdb 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -448,6 +448,9 @@ static int __init acpi_bus_init_irq(void) case ACPI_IRQ_MODEL_IOSAPIC: message = "IOSAPIC"; break; + case ACPI_IRQ_MODEL_GIC: + message = "GIC"; + break; case ACPI_IRQ_MODEL_PLATFORM: message = "platform specific model"; break; diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 0eabd15..c03d8d1 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -73,6 +73,7 @@ enum acpi_irq_model_id { ACPI_IRQ_MODEL_IOAPIC, ACPI_IRQ_MODEL_IOSAPIC, ACPI_IRQ_MODEL_PLATFORM, + ACPI_IRQ_MODEL_GIC, ACPI_IRQ_MODEL_COUNT };