From: Fu Wei fu.wei@linaro.org
This driver bases on linux kernel watchdog framework. It supports getting timeout from parameter and FDT at the driver init stage. The first timeout period expires, the interrupt routine got another timeout period to run panic for saving system context.
Signed-off-by: Fu Wei fu.wei@linaro.org --- drivers/watchdog/Kconfig | 11 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/sbsa_gwdt.c | 383 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 395 insertions(+) create mode 100644 drivers/watchdog/sbsa_gwdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index e5e7c55..554f18a 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -152,6 +152,17 @@ config ARM_SP805_WATCHDOG ARM Primecell SP805 Watchdog timer. This will reboot your system when the timeout is reached.
+config ARM_SBSA_WATCHDOG + tristate "ARM SBSA Generic Watchdog" + depends on ARM64 + depends on ARM_ARCH_TIMER + select WATCHDOG_CORE + help + ARM SBSA Generic Watchdog. This watchdog has two Watchdog timeouts. + The first timeout will trigger a panic; the second timeout will + trigger a system reset. + More details: ARM DEN0029B - Server Base System Architecture (SBSA) + config AT91RM9200_WATCHDOG tristate "AT91RM9200 watchdog" depends on SOC_AT91RM9200 && MFD_SYSCON diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 5c19294..471f1b7c 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
# ARM Architecture obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o +obj-$(CONFIG_ARM_SBSA_WATCHDOG) += sbsa_gwdt.o obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o obj-$(CONFIG_CADENCE_WATCHDOG) += cadence_wdt.o diff --git a/drivers/watchdog/sbsa_gwdt.c b/drivers/watchdog/sbsa_gwdt.c new file mode 100644 index 0000000..1ddc10f --- /dev/null +++ b/drivers/watchdog/sbsa_gwdt.c @@ -0,0 +1,383 @@ +/* + * SBSA(Server Base System Architecture) Generic Watchdog driver + * + * Copyright (c) 2015, Linaro Ltd. + * Author: Fu Wei fu.wei@linaro.org + * Suravee Suthikulpanit Suravee.Suthikulpanit@amd.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Note: This SBSA Generic watchdog has two stage timeouts, + * When the first timeout occurs, WS0(SPI or LPI) is triggered, + * the second timeout period(as long as the first timeout period) starts. + * In WS0 interrupt routine, panic() will be called for collecting + * crashdown info. + * If system can not recover from WS0 interrupt routine, then second + * timeout occurs, WS1(reset or higher level interrupt) is triggered. + * The two timeout period can be set by WOR(32bit). + * WOR gives a maximum watch period of around 10s at the maximum + * system counter frequency. + * The System Counter shall run at maximum of 400MHz. + * + * But If we need a larger timeout period, this driver will programme WCV + * directly. That can support more than 10s timeout at the maximum + * system counter frequency. + * More details: ARM DEN0029B - Server Base System Architecture (SBSA) + * + * SBSA GWDT: |---WOR(or WCV)---WS0---WOR(or WCV)---WS1 + * |-----timeout-----WS0-----timeout-----WS1 + */ + +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/watchdog.h> +#include <asm/arch_timer.h> + +/* SBSA Generic Watchdog register definitions */ +/* refresh frame */ +#define SBSA_GWDT_WRR 0x000 + +/* control frame */ +#define SBSA_GWDT_WCS 0x000 +#define SBSA_GWDT_WOR 0x008 +#define SBSA_GWDT_WCV_LO 0x010 +#define SBSA_GWDT_WCV_HI 0x014 + +/* refresh/control frame */ +#define SBSA_GWDT_W_IIDR 0xfcc +#define SBSA_GWDT_IDR 0xfd0 + +/* Watchdog Control and Status Register */ +#define SBSA_GWDT_WCS_EN BIT(0) +#define SBSA_GWDT_WCS_WS0 BIT(1) +#define SBSA_GWDT_WCS_WS1 BIT(2) + +/** + * struct sbsa_gwdt - Internal representation of the SBSA GWDT + * @wdd: kernel watchdog_device structure + * @clk: store the System Counter clock frequency, in Hz. + * @max_wor_timeout: the maximum timeout value for WOR (in seconds). + * @refresh_base: Virtual address of the watchdog refresh frame + * @control_base: Virtual address of the watchdog control frame + */ +struct sbsa_gwdt { + struct watchdog_device wdd; + u32 clk; + int max_wor_timeout; + void __iomem *refresh_base; + void __iomem *control_base; +}; + +#define to_sbsa_gwdt(e) container_of(e, struct sbsa_gwdt, wdd) + +#define DEFAULT_TIMEOUT 30 /* seconds */ + +static unsigned int timeout; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (>=0, default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, S_IRUGO); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * help functions for accessing 64bit WCV register + */ +static u64 sbsa_gwdt_get_wcv(struct watchdog_device *wdd) +{ + u32 wcv_lo, wcv_hi; + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + + do { + wcv_hi = readl_relaxed(gwdt->control_base + SBSA_GWDT_WCV_HI); + wcv_lo = readl_relaxed(gwdt->control_base + SBSA_GWDT_WCV_LO); + } while (wcv_hi != readl_relaxed(gwdt->control_base + + SBSA_GWDT_WCV_HI)); + + return (((u64)wcv_hi << 32) | wcv_lo); +} + +static void reload_timeout_to_wcv(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + u64 wcv; + + wcv = arch_counter_get_cntvct() + (u64)wdd->timeout * gwdt->clk; + + writel_relaxed(upper_32_bits(wcv), + gwdt->control_base + SBSA_GWDT_WCV_HI); + writel_relaxed(lower_32_bits(wcv), + gwdt->control_base + SBSA_GWDT_WCV_LO); +} + +static int sbsa_gwdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + + wdd->timeout = timeout; + + if (timeout <= gwdt->max_wor_timeout) + writel_relaxed(timeout * gwdt->clk, + gwdt->control_base + SBSA_GWDT_WOR); + else + writel_relaxed(gwdt->max_wor_timeout * gwdt->clk, + gwdt->control_base + SBSA_GWDT_WOR); + + return 0; +} + +static unsigned int sbsa_gwdt_get_timeleft(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + u64 timeleft = sbsa_gwdt_get_wcv(wdd) - arch_counter_get_cntvct(); + + do_div(timeleft, gwdt->clk); + + return timeleft; +} + +static int sbsa_gwdt_keepalive(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + + if (wdd->timeout <= gwdt->max_wor_timeout) + /* + * Writing WRR for an explicit watchdog refresh. + * You can write anyting(like 0xc0ffee). + */ + writel_relaxed(0xc0ffee, gwdt->refresh_base + SBSA_GWDT_WRR); + else + reload_timeout_to_wcv(wdd); + + return 0; +} + +static int sbsa_gwdt_start(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + /* Force refresh due to hardware bug found in certain Soc. */ + writel_relaxed(0xc0ffee, gwdt->refresh_base + SBSA_GWDT_WRR); + /* writing WCS will cause an explicit watchdog refresh */ + writel_relaxed(SBSA_GWDT_WCS_EN, gwdt->control_base + SBSA_GWDT_WCS); + + return sbsa_gwdt_keepalive(wdd); +} + +static int sbsa_gwdt_stop(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + + writel_relaxed(0, gwdt->control_base + SBSA_GWDT_WCS); + + return 0; +} + +static irqreturn_t sbsa_gwdt_interrupt(int irq, void *dev_id) +{ + struct sbsa_gwdt *gwdt = (struct sbsa_gwdt *)dev_id; + struct watchdog_device *wdd = &gwdt->wdd; + + if (wdd->timeout > gwdt->max_wor_timeout) + reload_timeout_to_wcv(wdd); + + panic("SBSA Watchdog pre-timeout"); + + return IRQ_HANDLED; +} + +static struct watchdog_info sbsa_gwdt_info = { + .identity = "SBSA Generic Watchdog", + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE | + WDIOF_CARDRESET, +}; + +static struct watchdog_ops sbsa_gwdt_ops = { + .owner = THIS_MODULE, + .start = sbsa_gwdt_start, + .stop = sbsa_gwdt_stop, + .ping = sbsa_gwdt_keepalive, + .set_timeout = sbsa_gwdt_set_timeout, + .get_timeleft = sbsa_gwdt_get_timeleft, +}; + +static int sbsa_gwdt_probe(struct platform_device *pdev) +{ + u64 first_period_max = U64_MAX; + struct device *dev = &pdev->dev; + struct watchdog_device *wdd; + struct sbsa_gwdt *gwdt; + struct resource *res; + void *rf_base, *cf_base; + int ret, irq; + u32 status; + + gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL); + if (!gwdt) + return -ENOMEM; + platform_set_drvdata(pdev, gwdt); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "refresh"); + rf_base = devm_ioremap_resource(dev, res); + if (IS_ERR(rf_base)) + return PTR_ERR(rf_base); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control"); + cf_base = devm_ioremap_resource(dev, res); + if (IS_ERR(cf_base)) + return PTR_ERR(cf_base); + + irq = platform_get_irq_byname(pdev, "ws0"); + if (irq < 0) { + dev_err(dev, "unable to get ws0 interrupt.\n"); + return irq; + } + + /* + * Get the frequency of system counter from the cp15 interface of ARM + * Generic timer. We don't need to check it, because if it returns "0", + * system would panic in very early stage. + */ + gwdt->clk = arch_timer_get_cntfrq(); + gwdt->refresh_base = rf_base; + gwdt->control_base = cf_base; + gwdt->max_wor_timeout = U32_MAX / gwdt->clk; + + wdd = &gwdt->wdd; + wdd->parent = dev; + wdd->info = &sbsa_gwdt_info; + wdd->ops = &sbsa_gwdt_ops; + watchdog_set_drvdata(wdd, gwdt); + watchdog_set_nowayout(wdd, nowayout); + + wdd->min_timeout = 1; + do_div(first_period_max, gwdt->clk); + wdd->max_timeout = first_period_max; + + wdd->timeout = DEFAULT_TIMEOUT; + watchdog_init_timeout(wdd, timeout, dev); + + status = readl_relaxed(gwdt->control_base + SBSA_GWDT_WCS); + if (status & SBSA_GWDT_WCS_WS1) { + dev_warn(dev, "System reset by WDT(WCV: %llx)\n", + sbsa_gwdt_get_wcv(wdd)); + wdd->bootstatus |= WDIOF_CARDRESET; + } + /* Check if watchdog is already enabled */ + if (status & SBSA_GWDT_WCS_EN) { + dev_warn(dev, "already enabled\n"); + sbsa_gwdt_keepalive(wdd); + } + + /* update timeout to WOR */ + sbsa_gwdt_set_timeout(wdd, wdd->timeout); + + ret = devm_request_irq(dev, irq, sbsa_gwdt_interrupt, 0, + pdev->name, gwdt); + if (ret) { + dev_err(dev, "unable to request IRQ %d\n", irq); + return ret; + } + + ret = watchdog_register_device(wdd); + if (ret) + return ret; + + dev_info(dev, "Initialized with %ds timeout @ %u Hz\n", wdd->timeout, + gwdt->clk); + + return 0; +} + +static void sbsa_gwdt_shutdown(struct platform_device *pdev) +{ + struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev); + + sbsa_gwdt_stop(&gwdt->wdd); +} + +static int sbsa_gwdt_remove(struct platform_device *pdev) +{ + struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&gwdt->wdd); + + return 0; +} + +/* Disable watchdog if it is active during suspend */ +static int __maybe_unused sbsa_gwdt_suspend(struct device *dev) +{ + struct sbsa_gwdt *gwdt = dev_get_drvdata(dev); + + if (watchdog_active(&gwdt->wdd)) + sbsa_gwdt_stop(&gwdt->wdd); + + return 0; +} + +/* Enable watchdog and configure it if necessary */ +static int __maybe_unused sbsa_gwdt_resume(struct device *dev) +{ + struct sbsa_gwdt *gwdt = dev_get_drvdata(dev); + + if (watchdog_active(&gwdt->wdd)) + sbsa_gwdt_start(&gwdt->wdd); + + return 0; +} + +static const struct dev_pm_ops sbsa_gwdt_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sbsa_gwdt_suspend, sbsa_gwdt_resume) +}; + +static const struct of_device_id sbsa_gwdt_of_match[] = { + { .compatible = "arm,sbsa-gwdt", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sbsa_gwdt_of_match); + +static const struct platform_device_id sbsa_gwdt_pdev_match[] = { + { .name = "sbsa-gwdt", }, + {}, +}; +MODULE_DEVICE_TABLE(platform, sbsa_gwdt_pdev_match); + +static struct platform_driver sbsa_gwdt_driver = { + .driver = { + .name = "sbsa-gwdt", + .pm = &sbsa_gwdt_pm_ops, + .of_match_table = sbsa_gwdt_of_match, + }, + .probe = sbsa_gwdt_probe, + .remove = sbsa_gwdt_remove, + .shutdown = sbsa_gwdt_shutdown, + .id_table = sbsa_gwdt_pdev_match, +}; + +module_platform_driver(sbsa_gwdt_driver); + +MODULE_DESCRIPTION("SBSA Generic Watchdog Driver"); +MODULE_VERSION("v1.0"); +MODULE_AUTHOR("Fu Wei fu.wei@linaro.org"); +MODULE_AUTHOR("Suravee Suthikulpanit Suravee.Suthikulpanit@amd.com"); +MODULE_LICENSE("GPL v2");