Hi Timo,
On 22 May 2015 at 14:30, Timo Kokkonen timo.kokkonen@offcode.fi wrote:
On 21.05.2015 11:32, fu.wei@linaro.org wrote:
From: Fu Wei fu.wei@linaro.org
Also update Documentation/watchdog/watchdog-kernel-api.txt to introduce: (1)the new elements in the watchdog_device and watchdog_ops struct; (2)the new API "watchdog_init_timeouts".
Reasons: (1)kernel already has two watchdog drivers are using "pretimeout": drivers/char/ipmi/ipmi_watchdog.c drivers/watchdog/kempld_wdt.c(but the definition is different) (2)some other dirvers are going to use this: ARM SBSA Generic Watchdog
Hi,
As I was proposing some other API changes with my early-timeout-sec work, I can see my work is going to collide with your API change proposal a bit. So maybe I should ask your opinion as well..
Thank you for reminding me of that, I saw "early-timeout-sec", but because I don't get it in kernel API or watchdog_core.c, so I did not pay attention to it. Sorry.
Could this pretimeout feature be something that other drivers could benefit too?
yes , as you may know, I am making a patch for pretimeout support in watchdog framework
I can see that it does not do anything else except call panic() before letting the watchdog expire. This is something that could be emulated easily by the watchdog core for drivers that don't know anything about pretimeouts at all.
For SBSA watchdog, there are two stage timeout, and according to kernel doc: ---------------------- Pretimeouts:
Some watchdog timers can be set to have a trigger go off before the actual time they will reset the system. This can be done with an NMI, interrupt, or other mechanism. This allows Linux to record useful information (like panic information and kernel coredumps) before it resets. ----------------------
I think panic() is the right way to do now. but people may also need to config : PANIC_TIMEOUT [!=0] KEXEC KDUMP for debug reason
The way I was planning the API change there would need to be a small change with each watchdog driver in order to let the watchdog core take over generic behaviour on behalf of the driver. My goal was to make the change so that each driver that gets converted to the new API extensions gets a support for early-timeout-sec for free, without needing to enable support for it any way. If the API was designed properly, also pretimeouts could be handled easily and maybe even so that other drivers could have that feature even though their hardware does not explicitly give any support for it.
could you please point out your patch , then I can learn your idea :-) For now , I am working on a common "Pretimeouts" following the concept in kernel doc.
Any thoughts?
my thoughts is in my pretimeout patch , would you provide some suggestion ?
Great thanks !
Thanks, -Timo