On Wednesday, February 25, 2015 04:39:56 PM Hanjun Guo wrote:
From: Tomasz Nowicki tomasz.nowicki@linaro.org
ACPI kernel uses MADT table for proper GIC initialization. It needs to parse GIC related subtables, collect CPU interface and distributor addresses and call driver initialization function (which is hardware abstraction agnostic). In a similar way, FDT initialize GICv1/2.
NOTE: This commit allow to initialize GICv1/2 basic functionality. While now simple GICv2 init call is used, any further GIC features require generic infrastructure for proper ACPI irqchip initialization. That mechanism and stacked irqdomains to support GICv2 MSI/virtualization extension, GICv3/4 and its ITS are considered as next steps.
CC: Jason Cooper jason@lakedaemon.net CC: Marc Zyngier marc.zyngier@arm.com CC: Thomas Gleixner tglx@linutronix.de Tested-by: Suravee Suthikulpanit Suravee.Suthikulpanit@amd.com Tested-by: Yijing Wang wangyijing@huawei.com Tested-by: Mark Langsdorf mlangsdo@redhat.com Tested-by: Jon Masters jcm@redhat.com Tested-by: Timur Tabi timur@codeaurora.org Tested-by: Robert Richter rrichter@cavium.com Acked-by: Robert Richter rrichter@cavium.com Signed-off-by: Tomasz Nowicki tomasz.nowicki@linaro.org Signed-off-by: Hanjun Guo hanjun.guo@linaro.org
arch/arm64/include/asm/acpi.h | 2 + arch/arm64/kernel/acpi.c | 25 +++++++++ drivers/irqchip/irq-gic.c | 102 +++++++++++++++++++++++++++++++++++ drivers/irqchip/irqchip.c | 3 ++ include/linux/acpi.h | 14 +++++ include/linux/irqchip/arm-gic-acpi.h | 29 ++++++++++ 6 files changed, 175 insertions(+) create mode 100644 include/linux/irqchip/arm-gic-acpi.h
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 9a23369..a720a61 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -13,6 +13,8 @@ #define _ASM_ACPI_H #include <linux/mm.h> +#include <linux/irqchip/arm-gic-acpi.h>
#include <asm/cputype.h> #include <asm/smp_plat.h> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index 31f080e..af308c3 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -359,3 +359,28 @@ void __init acpi_boot_table_init(void) pr_err("Can't find FADT\n"); } }
+void __init acpi_gic_init(void) +{
- struct acpi_table_header *table;
- acpi_status status;
- acpi_size tbl_size;
- int err;
- if (acpi_disabled)
return;- status = acpi_get_table_with_size(ACPI_SIG_MADT, 0, &table, &tbl_size);
- if (ACPI_FAILURE(status)) {
const char *msg = acpi_format_exception(status);pr_err("Failed to get MADT table, %s\n", msg);return;- }
- err = gic_v2_acpi_init(table);
- if (err)
pr_err("Failed to initialize GIC IRQ controller");- early_acpi_os_unmap_memory((char *)table, tbl_size);
+} diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 4634cf7..929d668 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -33,12 +33,14 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/acpi.h> #include <linux/irqdomain.h> #include <linux/interrupt.h> #include <linux/percpu.h> #include <linux/slab.h> #include <linux/irqchip/chained_irq.h> #include <linux/irqchip/arm-gic.h> +#include <linux/irqchip/arm-gic-acpi.h> #include <asm/cputype.h> #include <asm/irq.h> @@ -1086,3 +1088,103 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init); IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init); #endif
+#ifdef CONFIG_ACPI +static phys_addr_t dist_phy_base, cpu_phy_base __initdata;
+static int __init +gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
const unsigned long end)+{
- struct acpi_madt_generic_interrupt *processor;
- phys_addr_t gic_cpu_base;
- static int cpu_base_assigned;
- processor = (struct acpi_madt_generic_interrupt *)header;
- if (BAD_MADT_ENTRY(processor, end))
return -EINVAL;- /*
* There is no support for non-banked GICv1/2 register in ACPI spec.* All CPU interface addresses have to be the same.*/- gic_cpu_base = processor->base_address;
- if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
return -EINVAL;- cpu_phy_base = gic_cpu_base;
- cpu_base_assigned = 1;
- return 0;
+}
+static int __init +gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
const unsigned long end)+{
- struct acpi_madt_generic_distributor *dist;
- dist = (struct acpi_madt_generic_distributor *)header;
- if (BAD_MADT_ENTRY(dist, end))
return -EINVAL;- dist_phy_base = dist->base_address;
- return 0;
+}
+int __init +gic_v2_acpi_init(struct acpi_table_header *table) +{
- void __iomem *cpu_base, *dist_base;
- int count;
- /* Collect CPU base addresses */
- count = acpi_parse_entries(ACPI_SIG_MADT,
sizeof(struct acpi_table_madt),gic_acpi_parse_madt_cpu, table,ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0);- if (count <= 0) {
pr_err("No valid GICC entries exist\n");return -EINVAL;- }
- /*
* Find distributor base address. We expect one distributor entry since* ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade.*/- count = acpi_parse_entries(ACPI_SIG_MADT,
sizeof(struct acpi_table_madt),gic_acpi_parse_madt_distributor, table,ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0);- if (count <= 0) {
pr_err("No valid GICD entries exist\n");return -EINVAL;- } else if (count > 1) {
pr_err("More than one GICD entry detected\n");return -EINVAL;- }
- cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
- if (!cpu_base) {
pr_err("Unable to map GICC registers\n");return -ENOMEM;- }
- dist_base = ioremap(dist_phy_base, ACPI_GICV2_DIST_MEM_SIZE);
- if (!dist_base) {
pr_err("Unable to map GICD registers\n");iounmap(cpu_base);return -ENOMEM;- }
- /*
* Initialize zero GIC instance (no multi-GIC support). Also, set GIC* as default IRQ domain to allow for GSI registration and GSI to IRQ* number translation (see acpi_register_gsi() and acpi_gsi_to_irq()).*/- gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
- irq_set_default_host(gic_data[0].domain);
- return 0;
+} +#endif diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c index 0fe2f71..5855240 100644 --- a/drivers/irqchip/irqchip.c +++ b/drivers/irqchip/irqchip.c @@ -8,6 +8,7 @@
- warranty of any kind, whether express or implied.
*/ +#include <linux/acpi.h> #include <linux/init.h> #include <linux/of_irq.h> #include <linux/irqchip.h> @@ -26,4 +27,6 @@ extern struct of_device_id __irqchip_of_table[]; void __init irqchip_init(void) { of_irq_init(__irqchip_of_table);
- acpi_irq_init();
} diff --git a/include/linux/acpi.h b/include/linux/acpi.h index c03d8d1..e27117a 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -557,6 +557,20 @@ static inline int acpi_device_modalias(struct device *dev, #endif /* !CONFIG_ACPI */ +#if defined(CONFIG_ACPI) && defined(CONFIG_ARM64) +static inline void acpi_irq_init(void) +{
- /*
* Hardcode ACPI IRQ chip initialization to GICv2 for now.* Proper irqchip infrastructure will be implemented along with* incoming GICv2m|GICv3|ITS bits.*/- acpi_gic_init();
+} +#else +static inline void acpi_irq_init(void) { } +#endif
I don't want this in a common header.