From: Fu Wei fu.wei@linaro.org
Also update Documentation/watchdog/watchdog-kernel-api.txt to introduce: (1)the new elements in the watchdog_device and watchdog_ops struct; (2)the new API "watchdog_init_timeouts"
Reasons: (1)kernel already has two watchdog drivers are using "pretimeout": drivers/char/ipmi/ipmi_watchdog.c drivers/watchdog/kempld_wdt.c(but the definition is different) (2)some other drivers are going to use this: ARM SBSA Generic Watchdog
Acked-by: Arnd Bergmann arnd@arndb.de Tested-by: Suravee Suthikulpanit Suravee.Suthikulpanit@amd.com Signed-off-by: Fu Wei fu.wei@linaro.org --- Documentation/watchdog/watchdog-kernel-api.txt | 47 +++++++++++-- drivers/watchdog/watchdog_core.c | 95 +++++++++++++++++++------- drivers/watchdog/watchdog_dev.c | 50 ++++++++++++++ include/linux/watchdog.h | 33 ++++++++- 4 files changed, 192 insertions(+), 33 deletions(-)
diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt index a0438f3..95b355d 100644 --- a/Documentation/watchdog/watchdog-kernel-api.txt +++ b/Documentation/watchdog/watchdog-kernel-api.txt @@ -49,6 +49,9 @@ struct watchdog_device { unsigned int timeout; unsigned int min_timeout; unsigned int max_timeout; + unsigned int pretimeout; + unsigned int min_pretimeout; + unsigned int max_pretimeout; void *driver_data; struct mutex lock; unsigned long status; @@ -70,6 +73,9 @@ It contains following fields: * timeout: the watchdog timer's timeout value (in seconds). * min_timeout: the watchdog timer's minimum timeout value (in seconds). * max_timeout: the watchdog timer's maximum timeout value (in seconds). +* pretimeout: the watchdog timer's pretimeout value (in seconds). +* min_pretimeout: the watchdog timer's minimum pretimeout value (in seconds). +* max_pretimeout: the watchdog timer's maximum pretimeout value (in seconds). * bootstatus: status of the device after booting (reported with watchdog WDIOF_* status bits). * driver_data: a pointer to the drivers private data of a watchdog device. @@ -92,6 +98,7 @@ struct watchdog_ops { int (*ping)(struct watchdog_device *); unsigned int (*status)(struct watchdog_device *); int (*set_timeout)(struct watchdog_device *, unsigned int); + int (*set_pretimeout)(struct watchdog_device *, unsigned int); unsigned int (*get_timeleft)(struct watchdog_device *); void (*ref)(struct watchdog_device *); void (*unref)(struct watchdog_device *); @@ -153,9 +160,19 @@ they are supported. These optional routines/operations are: and -EIO for "could not write value to the watchdog". On success this routine should set the timeout value of the watchdog_device to the achieved timeout value (which may be different from the requested one - because the watchdog does not necessarily has a 1 second resolution). + because the watchdog does not necessarily has a 1 second resolution; + If the driver supports pretimeout, then the timeout value must be greater + than that). (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the watchdog's info structure). +* set_pretimeout: this routine checks and changes the pretimeout of the + watchdog timer device. It returns 0 on success, -EINVAL for "parameter out of + range" and -EIO for "could not write value to the watchdog". On success this + routine should set the pretimeout value of the watchdog_device to the + achieved pretimeout value (which may be different from the requested one + because the watchdog does not necessarily has a 1 second resolution). + (Note: the WDIOF_PRETIMEOUT needs to be set in the options field of the + watchdog's info structure). * get_timeleft: this routines returns the time that's left before a reset. * ref: the operation that calls kref_get on the kref of a dynamically allocated watchdog_device struct. @@ -219,8 +236,28 @@ extern int watchdog_init_timeout(struct watchdog_device *wdd, unsigned int timeout_parm, struct device *dev);
The watchdog_init_timeout function allows you to initialize the timeout field -using the module timeout parameter or by retrieving the timeout-sec property from -the device tree (if the module timeout parameter is invalid). Best practice is -to set the default timeout value as timeout value in the watchdog_device and -then use this function to set the user "preferred" timeout value. +using the module timeout parameter or by retrieving the first element of +the timeout-sec property from the device tree (if the module timeout parameter +is invalid). Best practice is to set the default timeout value as timeout value +in the watchdog_device and then use this function to set the user "preferred" +timeout value. +This routine returns zero on success and a negative errno code for failure. + +Some watchdog timers have two stage of timeouts(timeout and pretimeout), +to initialize the timeout and pretimeout fields at the same time, the following +function can be used: + +extern int watchdog_init_timeouts(struct watchdog_device *wdd, + unsigned int pretimeout_parm, + unsigned int timeout_parm, + struct device *dev); + +The watchdog_init_timeouts function allows you to initialize the pretimeout and +timeout fields using the module pretimeout and timeout parameter or by +retrieving the elements in the timeout-sec property(the first element is for +timeout, the second one is for pretimeout) from the device tree(if the module +pretimeout and timeout parameter are invalid). +Best practice is to set the default pretimeout and timeout value as pretimeout +and timeout value in the watchdog_device and then use this function to set the +user "preferred" pretimeout value. This routine returns zero on success and a negative errno code for failure. diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c index cec9b55..85b1d33 100644 --- a/drivers/watchdog/watchdog_core.c +++ b/drivers/watchdog/watchdog_core.c @@ -43,60 +43,105 @@ static DEFINE_IDA(watchdog_ida); static struct class *watchdog_class;
-static void watchdog_check_min_max_timeout(struct watchdog_device *wdd) +static void watchdog_check_min_max_timeouts(struct watchdog_device *wdd) { /* - * Check that we have valid min and max timeout values, if - * not reset them both to 0 (=not used or unknown) + * Check that we have valid min and max pretimeout and timeout values, + * if not reset them both to 0 (=not used or unknown) */ + if (wdd->min_pretimeout > wdd->max_pretimeout) { + pr_info("Invalid min and max pretimeout, resetting to 0\n"); + wdd->min_pretimeout = 0; + wdd->max_pretimeout = 0; + } if (wdd->min_timeout > wdd->max_timeout) { pr_info("Invalid min and max timeout values, resetting to 0!\n"); wdd->min_timeout = 0; wdd->max_timeout = 0; } + /* + * Check that we have valid min and max timeout values, + * if not reset them both to pretimeout limits + */ + if (wdd->min_pretimeout && wdd->min_timeout < wdd->min_pretimeout) { + pr_info("Invalid min timeout, resetting to min pretimeout\n"); + wdd->min_timeout = wdd->min_pretimeout; + } + if (wdd->max_pretimeout && wdd->max_timeout < wdd->max_pretimeout) { + pr_info("Invalid max timeout, resetting to max pretimeout\n"); + wdd->max_timeout = wdd->max_pretimeout; + } }
/** - * watchdog_init_timeout() - initialize the timeout field + * watchdog_init_timeouts() - initialize the pretimeout and timeout field + * @pretimeout_parm: pretimeout module parameter * @timeout_parm: timeout module parameter * @dev: Device that stores the timeout-sec property * - * Initialize the timeout field of the watchdog_device struct with either the - * timeout module parameter (if it is valid value) or the timeout-sec property - * (only if it is a valid value and the timeout_parm is out of bounds). - * If none of them are valid then we keep the old value (which should normally - * be the default timeout value. + * Initialize the pretimeout and timeout field of the watchdog_device struct + * with either the pretimeout and timeout module parameter (if it is valid + * value) or the timeout-sec property (only if it is a valid value and the + * pretimeout_parm and timeout_parm is out of bounds). If none of them are + * valid, then we keep the old value (which should normally be the default + * timeout value). * * A zero is returned on success and -EINVAL for failure. */ -int watchdog_init_timeout(struct watchdog_device *wdd, - unsigned int timeout_parm, struct device *dev) +int watchdog_init_timeouts(struct watchdog_device *wdd, + unsigned int pretimeout_parm, + unsigned int timeout_parm, + struct device *dev) { - unsigned int t = 0; - int ret = 0; + u32 timeouts[2]; + int ret = 0, length = 0;
- watchdog_check_min_max_timeout(wdd); + watchdog_check_min_max_timeouts(wdd);
- /* try to get the timeout module parameter first */ - if (!watchdog_timeout_invalid(wdd, timeout_parm) && timeout_parm) { - wdd->timeout = timeout_parm; - return ret; + /* try to get the timeout and pretimeout module parameter first */ + if (pretimeout_parm) { + if (!watchdog_pretimeout_invalid(wdd, pretimeout_parm)) + wdd->pretimeout = pretimeout_parm; + else + ret = -EINVAL; } - if (timeout_parm) + + if (timeout_parm) { + if (!watchdog_timeout_invalid(wdd, timeout_parm)) { + wdd->timeout = timeout_parm; + return ret; + } ret = -EINVAL; + }
/* try to get the timeout_sec property */ if (dev == NULL || dev->of_node == NULL) return ret; - of_property_read_u32(dev->of_node, "timeout-sec", &t); - if (!watchdog_timeout_invalid(wdd, t) && t) - wdd->timeout = t; - else + + of_find_property(dev->of_node, "timeout-sec", &length); + if (length > 0 && length <= sizeof(u32) * 2) { + of_property_read_u32_array(dev->of_node, + "timeout-sec", timeouts, + length / sizeof(u32)); + if (length == 2) { + if (!watchdog_pretimeout_invalid(wdd, timeouts[1]) && + timeouts[1]) + wdd->pretimeout = timeouts[1]; + else + ret = -EINVAL; + } + + if (!watchdog_timeout_invalid(wdd, timeouts[0]) && timeouts[0]) + wdd->timeout = timeouts[0]; + else + ret = -EINVAL; + } else { ret = -EINVAL; + }
return ret; } -EXPORT_SYMBOL_GPL(watchdog_init_timeout); +EXPORT_SYMBOL_GPL(watchdog_init_timeouts);
/** * watchdog_register_device() - register a watchdog device @@ -119,7 +164,7 @@ int watchdog_register_device(struct watchdog_device *wdd) if (wdd->ops->start == NULL || wdd->ops->stop == NULL) return -EINVAL;
- watchdog_check_min_max_timeout(wdd); + watchdog_check_min_max_timeouts(wdd);
/* * Note: now that all watchdog_device data has been verified, we diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c index 6aaefba..a65a9b0 100644 --- a/drivers/watchdog/watchdog_dev.c +++ b/drivers/watchdog/watchdog_dev.c @@ -218,6 +218,38 @@ out_timeout: }
/* + * watchdog_set_pretimeout: set the watchdog timer pretimeout + * @wddev: the watchdog device to set the timeout for + * @pretimeout: pretimeout to set in seconds + */ + +static int watchdog_set_pretimeout(struct watchdog_device *wddev, + unsigned int pretimeout) +{ + int err; + + if (!wddev->ops->set_pretimeout || + !(wddev->info->options & WDIOF_PRETIMEOUT)) + return -EOPNOTSUPP; + + if (watchdog_pretimeout_invalid(wddev, pretimeout)) + return -EINVAL; + + mutex_lock(&wddev->lock); + + if (test_bit(WDOG_UNREGISTERED, &wddev->status)) { + err = -ENODEV; + goto out_pretimeout; + } + + err = wddev->ops->set_pretimeout(wddev, pretimeout); + +out_pretimeout: + mutex_unlock(&wddev->lock); + return err; +} + +/* * watchdog_get_timeleft: wrapper to get the time left before a reboot * @wddev: the watchdog device to get the remaining time from * @timeleft: the time that's left @@ -388,6 +420,24 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd, if (wdd->timeout == 0) return -EOPNOTSUPP; return put_user(wdd->timeout, p); + case WDIOC_SETPRETIMEOUT: + if (get_user(val, p)) + return -EFAULT; + err = watchdog_set_pretimeout(wdd, val); + if (err < 0) + return err; + /* + * If the watchdog is active then we send a keepalive ping + * to make sure that the watchdog keep's running (and if + * possible that it takes the new timeout) + */ + watchdog_ping(wdd); + /* Fall */ + case WDIOC_GETPRETIMEOUT: + /* pretimeout == 0 means that we don't know the pretimeout */ + if (wdd->pretimeout == 0) + return -EOPNOTSUPP; + return put_user(wdd->pretimeout, p); case WDIOC_GETTIMELEFT: err = watchdog_get_timeleft(wdd, &val); if (err) diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index a746bf5..e776e1d 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -25,6 +25,7 @@ struct watchdog_device; * @ping: The routine that sends a keepalive ping to the watchdog device. * @status: The routine that shows the status of the watchdog device. * @set_timeout:The routine for setting the watchdog devices timeout value. + * @set_pretimeout:The routine for setting the watchdog devices pretimeout value * @get_timeleft:The routine that get's the time that's left before a reset. * @ref: The ref operation for dyn. allocated watchdog_device structs * @unref: The unref operation for dyn. allocated watchdog_device structs @@ -44,6 +45,7 @@ struct watchdog_ops { int (*ping)(struct watchdog_device *); unsigned int (*status)(struct watchdog_device *); int (*set_timeout)(struct watchdog_device *, unsigned int); + int (*set_pretimeout)(struct watchdog_device *, unsigned int); unsigned int (*get_timeleft)(struct watchdog_device *); void (*ref)(struct watchdog_device *); void (*unref)(struct watchdog_device *); @@ -62,6 +64,9 @@ struct watchdog_ops { * @timeout: The watchdog devices timeout value. * @min_timeout:The watchdog devices minimum timeout value. * @max_timeout:The watchdog devices maximum timeout value. + * @pretimeout: The watchdog devices pretimeout value. + * @min_pretimeout:The watchdog devices minimum pretimeout value. + * @max_pretimeout:The watchdog devices maximum pretimeout value. * @driver-data:Pointer to the drivers private data. * @lock: Lock for watchdog core internal use only. * @status: Field that contains the devices internal status bits. @@ -86,6 +91,9 @@ struct watchdog_device { unsigned int timeout; unsigned int min_timeout; unsigned int max_timeout; + unsigned int pretimeout; + unsigned int min_pretimeout; + unsigned int max_pretimeout; void *driver_data; struct mutex lock; unsigned long status; @@ -117,7 +125,17 @@ static inline void watchdog_set_nowayout(struct watchdog_device *wdd, bool noway static inline bool watchdog_timeout_invalid(struct watchdog_device *wdd, unsigned int t) { return ((wdd->max_timeout != 0) && - (t < wdd->min_timeout || t > wdd->max_timeout)); + (t < wdd->min_timeout || t > wdd->max_timeout || + t < wdd->pretimeout)); +} + +/* Use the following function to check if a pretimeout value is invalid */ +static inline bool watchdog_pretimeout_invalid(struct watchdog_device *wdd, + unsigned int t) +{ + return (wdd->max_pretimeout != 0 && + (t < wdd->min_pretimeout || t > wdd->max_pretimeout || + (wdd->timeout != 0 && t > wdd->timeout))); }
/* Use the following functions to manipulate watchdog driver specific data */ @@ -132,11 +150,20 @@ static inline void *watchdog_get_drvdata(struct watchdog_device *wdd) }
/* drivers/watchdog/watchdog_core.c */ -extern int watchdog_init_timeout(struct watchdog_device *wdd, - unsigned int timeout_parm, struct device *dev); +extern int watchdog_init_timeouts(struct watchdog_device *wdd, + unsigned int pretimeout_parm, + unsigned int timeout_parm, + struct device *dev); extern int watchdog_register_device(struct watchdog_device *); extern void watchdog_unregister_device(struct watchdog_device *);
+static inline int watchdog_init_timeout(struct watchdog_device *wdd, + unsigned int timeout_parm, + struct device *dev) +{ + return watchdog_init_timeouts(wdd, 0, timeout_parm, dev); +} + #ifdef CONFIG_HARDLOCKUP_DETECTOR void watchdog_nmi_disable_all(void); void watchdog_nmi_enable_all(void);