We are going to use mmio_config_{} name convention across all architectures. Currently it belongs to asm/pci_x86.h header which should be included only for x86 specific files. From now on, those accessors are in asm/pci.h header which can be included in non-architecture code much easier.
Signed-off-by: Tomasz Nowicki tomasz.nowicki@linaro.org Tested-by: Hanjun Guo hanjun.guo@linaro.org --- arch/x86/include/asm/pci.h | 42 +++++++++++++++++++++++++++++++++++++++++ arch/x86/include/asm/pci_x86.h | 43 ------------------------------------------ 2 files changed, 42 insertions(+), 43 deletions(-)
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 0892ea0..5ba3720 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -71,6 +71,48 @@ void pcibios_set_master(struct pci_dev *dev); struct irq_routing_table *pcibios_get_irq_routing_table(void); int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+/* + * AMD Fam10h CPUs are buggy, and cannot access MMIO config space + * on their northbrige except through the * %eax register. As such, you MUST + * NOT use normal IOMEM accesses, you need to only use the magic mmio-config + * accessor functions. + * In fact just use pci_config_*, nothing else please. + */ +static inline unsigned char mmio_config_readb(void __iomem *pos) +{ + u8 val; + asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos)); + return val; +} + +static inline unsigned short mmio_config_readw(void __iomem *pos) +{ + u16 val; + asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos)); + return val; +} + +static inline unsigned int mmio_config_readl(void __iomem *pos) +{ + u32 val; + asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos)); + return val; +} + +static inline void mmio_config_writeb(void __iomem *pos, u8 val) +{ + asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory"); +} + +static inline void mmio_config_writew(void __iomem *pos, u16 val) +{ + asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory"); +} + +static inline void mmio_config_writel(void __iomem *pos, u32 val) +{ + asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory"); +}
#define HAVE_PCI_MMAP extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index caba141..42e7332 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -121,49 +121,6 @@ extern int __init pcibios_init(void); extern int pci_legacy_init(void); extern void pcibios_fixup_irqs(void);
-/* - * AMD Fam10h CPUs are buggy, and cannot access MMIO config space - * on their northbrige except through the * %eax register. As such, you MUST - * NOT use normal IOMEM accesses, you need to only use the magic mmio-config - * accessor functions. - * In fact just use pci_config_*, nothing else please. - */ -static inline unsigned char mmio_config_readb(void __iomem *pos) -{ - u8 val; - asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos)); - return val; -} - -static inline unsigned short mmio_config_readw(void __iomem *pos) -{ - u16 val; - asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos)); - return val; -} - -static inline unsigned int mmio_config_readl(void __iomem *pos) -{ - u32 val; - asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos)); - return val; -} - -static inline void mmio_config_writeb(void __iomem *pos, u8 val) -{ - asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory"); -} - -static inline void mmio_config_writew(void __iomem *pos, u16 val) -{ - asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory"); -} - -static inline void mmio_config_writel(void __iomem *pos, u32 val) -{ - asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory"); -} - #ifdef CONFIG_PCI # ifdef CONFIG_ACPI # define x86_default_pci_init pci_acpi_init