From: Al Stone ahs3@redhat.com
Signed-off-by: Al Stone al.stone@linaro.org --- drivers/acpi/bus.c | 3 ++- drivers/acpi/osl.c | 10 ++++++---- drivers/acpi/pci_link.c | 14 ++++++++------ 3 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 439c369..7fcbc6a 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -543,7 +543,8 @@ void __init acpi_early_init(void) goto error0; }
-#ifdef CONFIG_X86 +#if (!CONFIG_ACPI_REDUCED_HARDWARE) + /* NB: in HW reduced mode, FADT sci_interrupt has no meaning */ if (!acpi_ioapic) { /* compatible (0) means level (3) */ if (!(acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)) { diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 34beeba..75da583 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -85,6 +85,7 @@ static int (*__acpi_os_prepare_extended_sleep)(u8 sleep_state, u32 val_a,
static acpi_osd_handler acpi_irq_handler; static void *acpi_irq_context; +static u32 acpi_irq_number; static struct workqueue_struct *kacpid_wq; static struct workqueue_struct *kacpi_notify_wq; static struct workqueue_struct *kacpi_hotplug_wq; @@ -841,9 +842,9 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler,
/* * ACPI interrupts different from the SCI in our copy of the FADT are - * not supported. + * not supported, except in HW reduced mode. */ - if (gsi != acpi_gbl_FADT.sci_interrupt) + if (!acpi_gbl_reduced_hardware && (gsi != acpi_gbl_FADT.sci_interrupt)) return AE_BAD_PARAMETER;
if (acpi_irq_handler) @@ -862,13 +863,14 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler, acpi_irq_handler = NULL; return AE_NOT_ACQUIRED; } + acpi_irq_number = irq;
return AE_OK; }
acpi_status acpi_os_remove_interrupt_handler(u32 irq, acpi_osd_handler handler) { - if (irq != acpi_gbl_FADT.sci_interrupt) + if (!acpi_gbl_reduced_hardware && (irq != acpi_gbl_FADT.sci_interrupt)) return AE_BAD_PARAMETER;
free_irq(irq, acpi_irq); @@ -1845,7 +1847,7 @@ acpi_status __init acpi_os_initialize1(void) acpi_status acpi_os_terminate(void) { if (acpi_irq_handler) { - acpi_os_remove_interrupt_handler(acpi_gbl_FADT.sci_interrupt, + acpi_os_remove_interrupt_handler(acpi_irq_number, acpi_irq_handler); }
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 2652a61..c0ab28a 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -23,7 +23,7 @@ * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * - * TBD: + * TBD: * 1. Support more than one IRQ resource entry per link device (index). * 2. Implement start/stop mechanism and use ACPI Bus Driver facilities * for IRQ management (e.g. start()->_SRS). @@ -268,8 +268,8 @@ static int acpi_pci_link_get_current(struct acpi_pci_link *link) } }
- /* - * Query and parse _CRS to get the current IRQ assignment. + /* + * Query and parse _CRS to get the current IRQ assignment. */
status = acpi_walk_resources(link->device->handle, METHOD_NAME__CRS, @@ -415,7 +415,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq) /* * "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt * Link Devices to move the PIRQs around to minimize sharing. - * + * * "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs * that the BIOS has already set to active. This is necessary because * ACPI has no automatic means of knowing what ISA IRQs are used. Note that @@ -433,7 +433,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq) * * Note that PCI IRQ routers have a list of possible IRQs, * which may not include the IRQs this table says are available. - * + * * Since this heuristic can't tell the difference between a link * that no device will attach to, vs. a link which may be shared * by multiple active devices -- it is not optimal. @@ -505,7 +505,9 @@ int __init acpi_irq_penalty_init(void) } } /* Add a penalty for the SCI */ - acpi_irq_penalty[acpi_gbl_FADT.sci_interrupt] += PIRQ_PENALTY_PCI_USING; + if (!acpi_gbl_reduced_hardware) + acpi_irq_penalty[acpi_gbl_FADT.sci_interrupt] += + PIRQ_PENALTY_PCI_USING; return 0; }