From: Fu Wei fu.wei@linaro.org
This patchset: (1)Preparation for adding GTDT support in arm_arch_timer: 1. Move some enums and marcos to header file; 2. Add a new enum for spi type; 3. Improve printk relevant code.
(2)Introduce ACPI GTDT parser: drivers/acpi/arm64/acpi_gtdt.c Parse all kinds of timer in GTDT table of ACPI:arch timer, memory-mapped timer and SBSA Generic Watchdog timer. This driver can help to simplify all the relevant timer drivers, and separate all the ACPI GTDT knowledge from them.
(3)Simplify ACPI code for arm_arch_timer
(4)Add GTDT support for ARM memory-mapped timer
This patchset depends on the following patchset: [UPDATE PATCH V11 1/8] ACPI: I/O Remapping Table (IORT) initial support https://lkml.org/lkml/2016/9/12/949
This patchset has been tested on the following platforms: (1)ARM Foundation v8 model
Changelog: v12: https://lkml.org/lkml/2016/9/13/ Rebase to latest Linux 4.8-rc6 Delete the confusing "skipping" in the error message.
V11: https://lkml.org/lkml/2016/9/6/354 Rebase to latest Linux 4.8-rc5 Delete typedef (suggested by checkpatch.pl)
V10: https://lkml.org/lkml/2016/7/26/215 Drop the "readq" patch. Rebase to latest Linux 4.7.
V9: https://lkml.org/lkml/2016/7/25/345 Improve pr_err message in acpi gtdt driver. Update Commit message for 7/9 shorten the irq mapping function name Improve GTDT driver for memory-mapped timer
v8: https://lkml.org/lkml/2016/7/19/660 Improve "pr_fmt(fmt)" definition: add "ACPI" in front of "GTDT", and also improve printk message. Simplify is_timer_block and is_watchdog. Merge acpi_gtdt_desc_init and gtdt_arch_timer_init into acpi_gtdt_init(); Delete __init in include/linux/acpi.h for GTDT API Make ARM64 select GTDT. Delete "#include <linux/module.h>" from acpi_gtdt.c Simplify GT block parse code.
v7: https://lkml.org/lkml/2016/7/13/769 Move the GTDT driver to drivers/acpi/arm64 Add add the ARM64-specific ACPI Support maintainers in MAINTAINERS Merge 3 patches of GTDT parser driver. Fix the for_each_platform_timer bug.
v6: https://lkml.org/lkml/2016/6/29/580 split the GTDT driver to 4 parts: basic, arch_timer, memory-mapped timer, and SBSA Generic Watchdog timer Improve driver by suggestions and example code from Daniel Lezcano
v5: https://lkml.org/lkml/2016/5/24/356 Sorting out all patches, simplify the API of GTDT driver: GTDT driver just fills the data struct for arm_arch_timer driver.
v4: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006667.html Delete the kvm relevant patches Separate two patches for sorting out the code for arm_arch_timer. Improve irq info export code to allow missing irq info in GTDT table.
v3: https://lkml.org/lkml/2016/2/1/658 Improve GTDT driver code: (1)improve pr_* by defining pr_fmt(fmt) (2)simplify gtdt_sbsa_gwdt_init (3)improve gtdt_arch_timer_data_init, if table is NULL, it will try to get GTDT table. Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr. Add arm_arch_timer get ppi from DT and GTDT support for kvm.
v2: https://lkml.org/lkml/2015/12/2/10 Rebase to latest kernel version(4.4-rc3). Fix the bug about the config problem, use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c
v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553
Fu Wei (8): clocksource/drivers/arm_arch_timer: Move enums and defines to header file clocksource/drivers/arm_arch_timer: Add a new enum for spi type clocksource/drivers/arm_arch_timer: Improve printk relevant code acpi/arm64: Add GTDT table parse driver clocksource/drivers/arm_arch_timer: Simplify ACPI support code. acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
arch/arm64/Kconfig | 1 + drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/gtdt.c | 309 +++++++++++++++++++++++++++++++++++ drivers/clocksource/Kconfig | 2 +- drivers/clocksource/arm_arch_timer.c | 225 +++++++++++++++++-------- drivers/watchdog/Kconfig | 1 + include/clocksource/arm_arch_timer.h | 32 ++++ include/linux/acpi.h | 7 + 9 files changed, 510 insertions(+), 71 deletions(-) create mode 100644 drivers/acpi/arm64/gtdt.c
From: Fu Wei fu.wei@linaro.org
To support the arm_arch_timer via ACPI we need to share defines and enums between the driver and the ACPI parser code.
Split out the relevant defines and enums into arm_arch_timer.h. No functional change.
Signed-off-by: Fu Wei fu.wei@linaro.org --- drivers/clocksource/arm_arch_timer.c | 11 ----------- include/clocksource/arm_arch_timer.h | 11 +++++++++++ 2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 5770054..aea6c10 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -51,8 +51,6 @@ #define CNTV_TVAL 0x38 #define CNTV_CTL 0x3c
-#define ARCH_CP15_TIMER BIT(0) -#define ARCH_MEM_TIMER BIT(1) static unsigned arch_timers_present __initdata;
static void __iomem *arch_counter_base; @@ -65,15 +63,6 @@ struct arch_timer { #define to_arch_timer(e) container_of(e, struct arch_timer, evt)
static u32 arch_timer_rate; - -enum ppi_nr { - PHYS_SECURE_PPI, - PHYS_NONSECURE_PPI, - VIRT_PPI, - HYP_PPI, - MAX_TIMER_PPI -}; - static int arch_timer_ppi[MAX_TIMER_PPI];
static struct clock_event_device __percpu *arch_timer_evt; diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h index caedb74..6f06481 100644 --- a/include/clocksource/arm_arch_timer.h +++ b/include/clocksource/arm_arch_timer.h @@ -19,6 +19,9 @@ #include <linux/timecounter.h> #include <linux/types.h>
+#define ARCH_CP15_TIMER BIT(0) +#define ARCH_MEM_TIMER BIT(1) + #define ARCH_TIMER_CTRL_ENABLE (1 << 0) #define ARCH_TIMER_CTRL_IT_MASK (1 << 1) #define ARCH_TIMER_CTRL_IT_STAT (1 << 2) @@ -34,6 +37,14 @@ enum arch_timer_reg { ARCH_TIMER_REG_TVAL, };
+enum ppi_nr { + PHYS_SECURE_PPI, + PHYS_NONSECURE_PPI, + VIRT_PPI, + HYP_PPI, + MAX_TIMER_PPI +}; + #define ARCH_TIMER_PHYS_ACCESS 0 #define ARCH_TIMER_VIRT_ACCESS 1 #define ARCH_TIMER_MEM_PHYS_ACCESS 2
From: Fu Wei fu.wei@linaro.org
This patch add a new enum "spi_nr" and use it in the driver. Just for code's readability, no functional change.
Signed-off-by: Fu Wei fu.wei@linaro.org --- drivers/clocksource/arm_arch_timer.c | 4 ++-- include/clocksource/arm_arch_timer.h | 6 ++++++ 2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index aea6c10..059f7fb 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -861,9 +861,9 @@ static int __init arch_timer_mem_init(struct device_node *np) }
if (arch_timer_mem_use_virtual) - irq = irq_of_parse_and_map(best_frame, 1); + irq = irq_of_parse_and_map(best_frame, VIRT_SPI); else - irq = irq_of_parse_and_map(best_frame, 0); + irq = irq_of_parse_and_map(best_frame, PHYS_SPI);
ret = -EINVAL; if (!irq) { diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h index 6f06481..16dcd10 100644 --- a/include/clocksource/arm_arch_timer.h +++ b/include/clocksource/arm_arch_timer.h @@ -45,6 +45,12 @@ enum ppi_nr { MAX_TIMER_PPI };
+enum spi_nr { + PHYS_SPI, + VIRT_SPI, + MAX_TIMER_SPI +}; + #define ARCH_TIMER_PHYS_ACCESS 0 #define ARCH_TIMER_VIRT_ACCESS 1 #define ARCH_TIMER_MEM_PHYS_ACCESS 2
From: Fu Wei fu.wei@linaro.org
This patch defines pr_fmt(fmt) for all pr_* functions, then the pr_* doesn't need to add "arch_timer:" everytime.
Also delete some Blank Spaces in arch_timer_banner, according to the suggestion from checkpatch.pl.
No functional change.
Signed-off-by: Fu Wei fu.wei@linaro.org --- drivers/clocksource/arm_arch_timer.c | 53 ++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 26 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 059f7fb..7d48349 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -32,6 +32,9 @@
#include <clocksource/arm_arch_timer.h>
+#undef pr_fmt +#define pr_fmt(fmt) "arch_timer: " fmt + #define CNTTIDR 0x08 #define CNTTIDR_VIRT(n) (BIT(1) << ((n) * 4))
@@ -418,24 +421,24 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
/* Check the timer frequency. */ if (arch_timer_rate == 0) - pr_warn("Architected timer frequency not available\n"); + pr_warn("frequency not available\n"); }
static void arch_timer_banner(unsigned type) { - pr_info("Architected %s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n", - type & ARCH_CP15_TIMER ? "cp15" : "", - type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "", - type & ARCH_MEM_TIMER ? "mmio" : "", - (unsigned long)arch_timer_rate / 1000000, - (unsigned long)(arch_timer_rate / 10000) % 100, - type & ARCH_CP15_TIMER ? - (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" : - "", - type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "", - type & ARCH_MEM_TIMER ? - arch_timer_mem_use_virtual ? "virt" : "phys" : - ""); + pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n", + type & ARCH_CP15_TIMER ? "cp15" : "", + type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "", + type & ARCH_MEM_TIMER ? "mmio" : "", + (unsigned long)arch_timer_rate / 1000000, + (unsigned long)(arch_timer_rate / 10000) % 100, + type & ARCH_CP15_TIMER ? + (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" : + "", + type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "", + type & ARCH_MEM_TIMER ? + arch_timer_mem_use_virtual ? "virt" : "phys" : + ""); }
u32 arch_timer_get_rate(void) @@ -528,8 +531,7 @@ static void __init arch_counter_register(unsigned type)
static void arch_timer_stop(struct clock_event_device *clk) { - pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n", - clk->irq, smp_processor_id()); + pr_debug("disable IRQ%d cpu #%d\n", clk->irq, smp_processor_id());
disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]); if (arch_timer_has_nonsecure_ppi()) @@ -622,8 +624,7 @@ static int __init arch_timer_register(void) }
if (err) { - pr_err("arch_timer: can't register interrupt %d (%d)\n", - ppi, err); + pr_err("can't register interrupt %d (%d)\n", ppi, err); goto out_free; }
@@ -676,7 +677,7 @@ static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &t->evt); if (ret) { - pr_err("arch_timer: Failed to request mem timer irq\n"); + pr_err("Failed to request mem timer irq\n"); kfree(t); }
@@ -754,7 +755,7 @@ static int __init arch_timer_init(void) }
if (!has_ppi) { - pr_warn("arch_timer: No interrupt available, giving up\n"); + pr_warn("No interrupt available, giving up\n"); return -EINVAL; } } @@ -777,7 +778,7 @@ static int __init arch_timer_of_init(struct device_node *np) int i;
if (arch_timers_present & ARCH_CP15_TIMER) { - pr_warn("arch_timer: multiple nodes in dt, skipping\n"); + pr_warn("multiple nodes in dt, skipping\n"); return 0; }
@@ -812,7 +813,7 @@ static int __init arch_timer_mem_init(struct device_node *np) arch_timers_present |= ARCH_MEM_TIMER; cntctlbase = of_iomap(np, 0); if (!cntctlbase) { - pr_err("arch_timer: Can't find CNTCTLBase\n"); + pr_err("Can't find CNTCTLBase\n"); return -ENXIO; }
@@ -827,7 +828,7 @@ static int __init arch_timer_mem_init(struct device_node *np) u32 cntacr;
if (of_property_read_u32(frame, "frame-number", &n)) { - pr_err("arch_timer: Missing frame-number\n"); + pr_err("Missing frame-number\n"); of_node_put(frame); goto out; } @@ -856,7 +857,7 @@ static int __init arch_timer_mem_init(struct device_node *np) ret= -ENXIO; base = arch_counter_base = of_iomap(best_frame, 0); if (!base) { - pr_err("arch_timer: Can't map frame's registers\n"); + pr_err("Can't map frame's registers\n"); goto out; }
@@ -867,7 +868,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
ret = -EINVAL; if (!irq) { - pr_err("arch_timer: Frame missing %s irq", + pr_err("Frame missing %s irq", arch_timer_mem_use_virtual ? "virt" : "phys"); goto out; } @@ -909,7 +910,7 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table) struct acpi_table_gtdt *gtdt;
if (arch_timers_present & ARCH_CP15_TIMER) { - pr_warn("arch_timer: already initialized, skipping\n"); + pr_warn("already initialized, skipping\n"); return -EINVAL; }
From: Fu Wei fu.wei@linaro.org
This patch adds support for parsing arch timer in GTDT, provides some kernel APIs to parse all the PPIs and always-on info in GTDT and export them.
By this driver, we can simplify arm_arch_timer drivers, and separate the ACPI GTDT knowledge from it.
Signed-off-by: Fu Wei fu.wei@linaro.org Signed-off-by: Hanjun Guo hanjun.guo@linaro.org Acked-by: Rafael J. Wysocki rafael.j.wysocki@intel.com --- arch/arm64/Kconfig | 1 + drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/gtdt.c | 152 ++++++++++++++++++++++++++++++++++++++++++++ drivers/clocksource/Kconfig | 1 - include/linux/acpi.h | 6 ++ 6 files changed, 163 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index bc3f00f..0607728 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -2,6 +2,7 @@ config ARM64 def_bool y select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI + select ACPI_GTDT if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI select ACPI_MCFG if ACPI select ARCH_HAS_DEVMEM_IS_ALLOWED diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig index 4616da4..5a6f80f 100644 --- a/drivers/acpi/arm64/Kconfig +++ b/drivers/acpi/arm64/Kconfig @@ -4,3 +4,6 @@
config ACPI_IORT bool + +config ACPI_GTDT + bool diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile index 72331f2..1017def 100644 --- a/drivers/acpi/arm64/Makefile +++ b/drivers/acpi/arm64/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_ACPI_IORT) += iort.o +obj-$(CONFIG_ACPI_GTDT) += gtdt.o diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c new file mode 100644 index 0000000..b24844d --- /dev/null +++ b/drivers/acpi/arm64/gtdt.c @@ -0,0 +1,152 @@ +/* + * ARM Specific GTDT table Support + * + * Copyright (C) 2016, Linaro Ltd. + * Author: Daniel Lezcano daniel.lezcano@linaro.org + * Fu Wei fu.wei@linaro.org + * Hanjun Guo hanjun.guo@linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/init.h> +#include <linux/kernel.h> + +#include <clocksource/arm_arch_timer.h> + +#undef pr_fmt +#define pr_fmt(fmt) "ACPI GTDT: " fmt + +struct acpi_gtdt_descriptor { + struct acpi_table_gtdt *gtdt; + void *platform_timer_start; + void *gtdt_end; +}; + +static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata; + +static inline void *next_platform_timer(void *platform_timer) +{ + struct acpi_gtdt_header *gh = platform_timer; + + platform_timer += gh->length; + if (platform_timer < acpi_gtdt_desc.gtdt_end) + return platform_timer; + + return NULL; +} + +#define for_each_platform_timer(_g) \ + for (_g = acpi_gtdt_desc.platform_timer_start; _g; \ + _g = next_platform_timer(_g)) + +static inline bool is_timer_block(void *platform_timer) +{ + struct acpi_gtdt_header *gh = platform_timer; + + return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK; +} + +static inline bool is_watchdog(void *platform_timer) +{ + struct acpi_gtdt_header *gh = platform_timer; + + return gh->type == ACPI_GTDT_TYPE_WATCHDOG; +} + +static int __init map_gt_gsi(u32 interrupt, u32 flags) +{ + int trigger, polarity; + + if (!interrupt) + return 0; + + trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE + : ACPI_LEVEL_SENSITIVE; + + polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW + : ACPI_ACTIVE_HIGH; + + return acpi_register_gsi(NULL, interrupt, trigger, polarity); +} + +/* + * Map the PPIs of per-cpu arch_timer. + * @type: the type of PPI + * Returns 0 if error. + */ +int __init acpi_gtdt_map_ppi(int type) +{ + struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt; + + switch (type) { + case PHYS_SECURE_PPI: + return map_gt_gsi(gtdt->secure_el1_interrupt, + gtdt->secure_el1_flags); + case PHYS_NONSECURE_PPI: + return map_gt_gsi(gtdt->non_secure_el1_interrupt, + gtdt->non_secure_el1_flags); + case VIRT_PPI: + return map_gt_gsi(gtdt->virtual_timer_interrupt, + gtdt->virtual_timer_flags); + + case HYP_PPI: + return map_gt_gsi(gtdt->non_secure_el2_interrupt, + gtdt->non_secure_el2_flags); + default: + pr_err("Failed to map timer interrupt: invalid type.\n"); + } + + return 0; +} + +/* + * acpi_gtdt_c3stop - got c3stop info from GTDT + * + * Returns 1 if the timer is powered in deep idle state, 0 otherwise. + */ +bool __init acpi_gtdt_c3stop(void) +{ + struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt; + + return !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON); +} + +/* + * Get some basic info from GTDT table, and init the global variables above + * for all timers initialization of Generic Timer. + * This function does some validation on GTDT table. + */ +int __init acpi_gtdt_init(struct acpi_table_header *table) +{ + void *start; + struct acpi_table_gtdt *gtdt; + + gtdt = container_of(table, struct acpi_table_gtdt, header); + + acpi_gtdt_desc.gtdt = gtdt; + acpi_gtdt_desc.gtdt_end = (void *)table + table->length; + + if (table->revision < 2) { + pr_debug("Revision:%d doesn't support Platform Timers.\n", + table->revision); + return 0; + } + + if (!gtdt->platform_timer_count) { + pr_debug("No Platform Timer.\n"); + return 0; + } + + start = (void *)gtdt + gtdt->platform_timer_offset; + if (start < (void *)table + sizeof(struct acpi_table_gtdt)) { + pr_err(FW_BUG "Failed to retrieve timer info from firmware: invalid data.\n"); + return -EINVAL; + } + acpi_gtdt_desc.platform_timer_start = start; + + return gtdt->platform_timer_count; +} diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 5677886..b58d259 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -285,7 +285,6 @@ config CLKSRC_MPS2 config ARM_ARCH_TIMER bool select CLKSRC_OF if OF - select CLKSRC_ACPI if ACPI
config ARM_ARCH_TIMER_EVTSTREAM bool "Enable ARM architected timer event stream generation by default" diff --git a/include/linux/acpi.h b/include/linux/acpi.h index c5eaf2f..e2f9841 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -567,6 +567,12 @@ enum acpi_reconfig_event { int acpi_reconfig_notifier_register(struct notifier_block *nb); int acpi_reconfig_notifier_unregister(struct notifier_block *nb);
+#ifdef CONFIG_ACPI_GTDT +int acpi_gtdt_init(struct acpi_table_header *table); +int acpi_gtdt_map_ppi(int type); +bool acpi_gtdt_c3stop(void); +#endif + #else /* !CONFIG_ACPI */
#define acpi_disabled 1
From: Fu Wei fu.wei@linaro.org
The patch update arm_arch_timer driver to use the function provided by the new GTDT driver of ACPI. By this way, arm_arch_timer.c can be simplified, and separate all the ACPI GTDT knowledge from this timer driver.
Signed-off-by: Fu Wei fu.wei@linaro.org Signed-off-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/clocksource/Kconfig | 1 + drivers/clocksource/arm_arch_timer.c | 50 +++++++++--------------------------- 2 files changed, 13 insertions(+), 38 deletions(-)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index b58d259..a63bf12 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -8,6 +8,7 @@ config CLKSRC_OF config CLKSRC_ACPI bool select CLKSRC_PROBE + select ACPI_GTDT if ARM64
config CLKSRC_PROBE bool diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 7d48349..0197ef9 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -887,61 +887,35 @@ out: CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem", arch_timer_mem_init);
-#ifdef CONFIG_ACPI -static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags) -{ - int trigger, polarity; - - if (!interrupt) - return 0; - - trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE - : ACPI_LEVEL_SENSITIVE; - - polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW - : ACPI_ACTIVE_HIGH; - - return acpi_register_gsi(NULL, interrupt, trigger, polarity); -} - +#ifdef CONFIG_ACPI_GTDT /* Initialize per-processor generic timer */ static int __init arch_timer_acpi_init(struct acpi_table_header *table) { - struct acpi_table_gtdt *gtdt; + int timer_count;
if (arch_timers_present & ARCH_CP15_TIMER) { pr_warn("already initialized, skipping\n"); return -EINVAL; }
- gtdt = container_of(table, struct acpi_table_gtdt, header); - arch_timers_present |= ARCH_CP15_TIMER;
- arch_timer_ppi[PHYS_SECURE_PPI] = - map_generic_timer_interrupt(gtdt->secure_el1_interrupt, - gtdt->secure_el1_flags); - - arch_timer_ppi[PHYS_NONSECURE_PPI] = - map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt, - gtdt->non_secure_el1_flags); + timer_count = acpi_gtdt_init(table);
- arch_timer_ppi[VIRT_PPI] = - map_generic_timer_interrupt(gtdt->virtual_timer_interrupt, - gtdt->virtual_timer_flags); - - arch_timer_ppi[HYP_PPI] = - map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt, - gtdt->non_secure_el2_flags); + arch_timer_ppi[PHYS_SECURE_PPI] = acpi_gtdt_map_ppi(PHYS_SECURE_PPI); + arch_timer_ppi[PHYS_NONSECURE_PPI] = acpi_gtdt_map_ppi(PHYS_NONSECURE_PPI); + arch_timer_ppi[VIRT_PPI] = acpi_gtdt_map_ppi(VIRT_PPI); + arch_timer_ppi[HYP_PPI] = acpi_gtdt_map_ppi(HYP_PPI); + /* Always-on capability */ + arch_timer_c3stop = acpi_gtdt_c3stop();
/* Get the frequency from CNTFRQ */ arch_timer_detect_rate(NULL, NULL);
- /* Always-on capability */ - arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON); + if (timer_count < 0) + pr_err("Failed to get platform timer info.\n");
- arch_timer_init(); - return 0; + return arch_timer_init(); } CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init); #endif
From: Fu Wei fu.wei@linaro.org
On platforms booting with ACPI, architected memory-mapped timers' configuration data is provided by firmware through the ACPI GTDT static table.
The clocksource architected timer kernel driver requires a firmware interface to collect timer configuration and configure its driver. this infrastructure is present for device tree systems, but it is missing on systems booting with ACPI.
Implement the kernel infrastructure required to parse the static ACPI GTDT table so that the architected timer clocksource driver can make use of it on systems booting with ACPI, therefore enabling the corresponding timers configuration.
Signed-off-by: Fu Wei fu.wei@linaro.org Signed-off-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/acpi/arm64/gtdt.c | 70 ++++++++++++++++++++++++++++++++++++ include/clocksource/arm_arch_timer.h | 15 ++++++++ include/linux/acpi.h | 1 + 3 files changed, 86 insertions(+)
diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c index b24844d..b6021db 100644 --- a/drivers/acpi/arm64/gtdt.c +++ b/drivers/acpi/arm64/gtdt.c @@ -150,3 +150,73 @@ int __init acpi_gtdt_init(struct acpi_table_header *table)
return gtdt->platform_timer_count; } + +static int __init gtdt_parse_gt_block(struct acpi_gtdt_timer_block *block, + struct gt_block_data *data) +{ + struct acpi_gtdt_timer_entry *frame; + int i; + + if (!block || !data) + return -EINVAL; + + if (!block->block_address || !block->timer_count) + return -EINVAL; + + data->cntctlbase_phy = (phys_addr_t)block->block_address; + data->timer_count = block->timer_count; + + frame = (void *)block + block->timer_offset; + if (frame + block->timer_count != (void *)block + block->header.length) + return -EINVAL; + + /* + * Get the GT timer Frame data for every GT Block Timer + */ + for (i = 0; i < block->timer_count; i++, frame++) { + if (!frame->base_address || !frame->timer_interrupt) + return -EINVAL; + + data->timer[i].irq = map_gt_gsi(frame->timer_interrupt, + frame->timer_flags); + if (data->timer[i].irq <= 0) + return -EINVAL; + + if (frame->virtual_timer_interrupt) { + data->timer[i].virtual_irq = + map_gt_gsi(frame->virtual_timer_interrupt, + frame->virtual_timer_flags); + if (data->timer[i].virtual_irq <= 0) + return -EINVAL; + } + + data->timer[i].frame_nr = frame->frame_number; + data->timer[i].cntbase_phy = frame->base_address; + } + + return 0; +} + +/* + * Get the GT block info for memory-mapped timer from GTDT table. + */ +int __init gtdt_arch_timer_mem_init(struct gt_block_data *data) +{ + void *platform_timer; + int index = 0; + int ret; + + for_each_platform_timer(platform_timer) { + if (!is_timer_block(platform_timer)) + continue; + ret = gtdt_parse_gt_block(platform_timer, data + index); + if (ret) + return ret; + index++; + } + + if (index) + pr_info("found %d memory-mapped timer block(s).\n", index); + + return index; +} diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h index 16dcd10..94a5d14 100644 --- a/include/clocksource/arm_arch_timer.h +++ b/include/clocksource/arm_arch_timer.h @@ -56,6 +56,8 @@ enum spi_nr { #define ARCH_TIMER_MEM_PHYS_ACCESS 2 #define ARCH_TIMER_MEM_VIRT_ACCESS 3
+#define ARCH_TIMER_MEM_MAX_FRAME 8 + #define ARCH_TIMER_USR_PCT_ACCESS_EN (1 << 0) /* physical counter */ #define ARCH_TIMER_USR_VCT_ACCESS_EN (1 << 1) /* virtual counter */ #define ARCH_TIMER_VIRT_EVT_EN (1 << 2) @@ -71,6 +73,19 @@ struct arch_timer_kvm_info { int virtual_irq; };
+struct gt_timer_data { + int frame_nr; + phys_addr_t cntbase_phy; + int irq; + int virtual_irq; +}; + +struct gt_block_data { + phys_addr_t cntctlbase_phy; + int timer_count; + struct gt_timer_data timer[ARCH_TIMER_MEM_MAX_FRAME]; +}; + #ifdef CONFIG_ARM_ARCH_TIMER
extern u32 arch_timer_get_rate(void); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index e2f9841..5dc0b85 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -571,6 +571,7 @@ int acpi_reconfig_notifier_unregister(struct notifier_block *nb); int acpi_gtdt_init(struct acpi_table_header *table); int acpi_gtdt_map_ppi(int type); bool acpi_gtdt_c3stop(void); +int gtdt_arch_timer_mem_init(struct gt_block_data *data); #endif
#else /* !CONFIG_ACPI */
From: Fu Wei fu.wei@linaro.org
The patch add memory-mapped timer register support by using the information provided by the new GTDT driver of ACPI.
Signed-off-by: Fu Wei fu.wei@linaro.org --- drivers/clocksource/arm_arch_timer.c | 127 ++++++++++++++++++++++++++++++++++- 1 file changed, 124 insertions(+), 3 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 0197ef9..d33802b 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -888,7 +888,128 @@ CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem", arch_timer_mem_init);
#ifdef CONFIG_ACPI_GTDT -/* Initialize per-processor generic timer */ +static struct gt_timer_data __init *arch_timer_mem_get_timer( + struct gt_block_data *gt_blocks) +{ + struct gt_block_data *gt_block = gt_blocks; + struct gt_timer_data *best_frame = NULL; + void __iomem *cntctlbase; + u32 cnttidr; + int i; + + /* + * According to ARMv8 Architecture Reference Manual(ARM), + * the size of CNTCTLBase frame of memory-mapped timer + * is SZ_4K(Offset 0x000 – 0xFFF). + */ + cntctlbase = ioremap(gt_block->cntctlbase_phy, SZ_4K); + if (!cntctlbase) { + pr_err("Failed to map mem timer control frame base address\n"); + return NULL; + } + cnttidr = readl_relaxed(cntctlbase + CNTTIDR); + + /* + * Try to find a virtual capable frame. Otherwise fall back to a + * physical capable frame. + */ + for (i = 0; i < gt_block->timer_count; i++) { + int n; + u32 cntacr; + + n = gt_block->timer[i].frame_nr; + + /* Try enabling everything, and see what sticks */ + cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT | + CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT; + writel_relaxed(cntacr, cntctlbase + CNTACR(n)); + cntacr = readl_relaxed(cntctlbase + CNTACR(n)); + + if ((cnttidr & CNTTIDR_VIRT(n)) && + !(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) { + best_frame = >_block->timer[i]; + arch_timer_mem_use_virtual = true; + break; + } + + if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT)) + continue; + + best_frame = >_block->timer[i]; + } + iounmap(cntctlbase); + + return best_frame; +} + +static int __init arch_timer_mem_acpi_init(size_t timer_count) +{ + struct gt_block_data *gt_blocks; + struct gt_timer_data *gt_timer; + void __iomem *timer_cntbase; + int ret = -EINVAL; + int timer_irq; + + /* + * If we don't have any Platform Timer Structures, just return. + */ + if (!timer_count) + return 0; + + /* + * before really check all the Platform Timer Structures, + * we assume they are GT block, and allocate memory for them. + * We will free these memory once we finish the initialization. + */ + gt_blocks = kcalloc(timer_count, sizeof(*gt_blocks), GFP_KERNEL); + if (!gt_blocks) + return -ENOMEM; + + if (gtdt_arch_timer_mem_init(gt_blocks) > 0) { + gt_timer = arch_timer_mem_get_timer(gt_blocks); + if (!gt_timer) { + pr_err("Failed to get mem timer info.\n"); + goto error; + } + + if (arch_timer_mem_use_virtual) + timer_irq = gt_timer->virtual_irq; + else + timer_irq = gt_timer->irq; + if (!timer_irq) { + pr_err("Failed to get %s irq for mem timer.", + arch_timer_mem_use_virtual ? "virt" : "phys"); + goto error; + } + + /* + * According to ARMv8 Architecture Reference Manual(ARM), + * the size of CNTBaseN frames of memory-mapped timer + * is SZ_4K(Offset 0x000 – 0xFFF). + */ + timer_cntbase = ioremap(gt_timer->cntbase_phy, SZ_4K); + if (!timer_cntbase) { + pr_err("Failed to map mem timer base address.\n"); + goto error; + } + + ret = arch_timer_mem_register(timer_cntbase, timer_irq); + if (ret) { + iounmap(timer_cntbase); + pr_err("Failed to register mem timer.\n"); + goto error; + } + + arch_counter_base = timer_cntbase; + arch_timers_present |= ARCH_MEM_TIMER; + } + +error: + kfree(gt_blocks); + return ret; +} + +/* Initialize per-processor generic timer and memory-mapped timer(if present) */ static int __init arch_timer_acpi_init(struct acpi_table_header *table) { int timer_count; @@ -912,8 +1033,8 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table) /* Get the frequency from CNTFRQ */ arch_timer_detect_rate(NULL, NULL);
- if (timer_count < 0) - pr_err("Failed to get platform timer info.\n"); + if (timer_count < 0 || arch_timer_mem_acpi_init((size_t)timer_count)) + pr_err("Failed to initialize memory-mapped timer.\n");
return arch_timer_init(); }
Argh, new version...
On 13/09/16 11:39, fu.wei@linaro.org wrote:
From: Fu Wei fu.wei@linaro.org
The patch add memory-mapped timer register support by using the information provided by the new GTDT driver of ACPI.
Signed-off-by: Fu Wei fu.wei@linaro.org
drivers/clocksource/arm_arch_timer.c | 127 ++++++++++++++++++++++++++++++++++- 1 file changed, 124 insertions(+), 3 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 0197ef9..d33802b 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -888,7 +888,128 @@ CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem", arch_timer_mem_init); #ifdef CONFIG_ACPI_GTDT -/* Initialize per-processor generic timer */ +static struct gt_timer_data __init *arch_timer_mem_get_timer(
struct gt_block_data *gt_blocks)
+{
- struct gt_block_data *gt_block = gt_blocks;
- struct gt_timer_data *best_frame = NULL;
- void __iomem *cntctlbase;
- u32 cnttidr;
- int i;
- /*
* According to ARMv8 Architecture Reference Manual(ARM),
* the size of CNTCTLBase frame of memory-mapped timer
* is SZ_4K(Offset 0x000 – 0xFFF).
*/
- cntctlbase = ioremap(gt_block->cntctlbase_phy, SZ_4K);
- if (!cntctlbase) {
pr_err("Failed to map mem timer control frame base address\n");
return NULL;
- }
- cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
- /*
* Try to find a virtual capable frame. Otherwise fall back to a
* physical capable frame.
*/
- for (i = 0; i < gt_block->timer_count; i++) {
int n;
u32 cntacr;
n = gt_block->timer[i].frame_nr;
/* Try enabling everything, and see what sticks */
cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
writel_relaxed(cntacr, cntctlbase + CNTACR(n));
cntacr = readl_relaxed(cntctlbase + CNTACR(n));
if ((cnttidr & CNTTIDR_VIRT(n)) &&
!(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
best_frame = >_block->timer[i];
arch_timer_mem_use_virtual = true;
break;
}
if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
continue;
best_frame = >_block->timer[i];
- }
- iounmap(cntctlbase);
As I just said in my reply to the same patch in v11, all of this is duplicating existing infrastructure that already exists for DT. Please consider decoupling the core driver code from the firmware side and make this reusable.
Thanks,
M.
Hi Marc,
On 09/13/2016 07:00 PM, Marc Zyngier wrote:
Argh, new version...
On 13/09/16 11:39, fu.wei@linaro.org wrote:
From: Fu Wei fu.wei@linaro.org
The patch add memory-mapped timer register support by using the information provided by the new GTDT driver of ACPI.
Signed-off-by: Fu Wei fu.wei@linaro.org
drivers/clocksource/arm_arch_timer.c | 127 ++++++++++++++++++++++++++++++++++- 1 file changed, 124 insertions(+), 3 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 0197ef9..d33802b 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -888,7 +888,128 @@ CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem", arch_timer_mem_init); #ifdef CONFIG_ACPI_GTDT -/* Initialize per-processor generic timer */ +static struct gt_timer_data __init *arch_timer_mem_get_timer(
struct gt_block_data *gt_blocks)
+{
- struct gt_block_data *gt_block = gt_blocks;
- struct gt_timer_data *best_frame = NULL;
- void __iomem *cntctlbase;
- u32 cnttidr;
- int i;
- /*
* According to ARMv8 Architecture Reference Manual(ARM),
* the size of CNTCTLBase frame of memory-mapped timer
* is SZ_4K(Offset 0x000 – 0xFFF).
*/
- cntctlbase = ioremap(gt_block->cntctlbase_phy, SZ_4K);
- if (!cntctlbase) {
pr_err("Failed to map mem timer control frame base address\n");
return NULL;
- }
- cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
- /*
* Try to find a virtual capable frame. Otherwise fall back to a
* physical capable frame.
*/
- for (i = 0; i < gt_block->timer_count; i++) {
int n;
u32 cntacr;
n = gt_block->timer[i].frame_nr;
/* Try enabling everything, and see what sticks */
cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
writel_relaxed(cntacr, cntctlbase + CNTACR(n));
cntacr = readl_relaxed(cntctlbase + CNTACR(n));
if ((cnttidr & CNTTIDR_VIRT(n)) &&
!(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
best_frame = >_block->timer[i];
arch_timer_mem_use_virtual = true;
break;
}
if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
continue;
best_frame = >_block->timer[i];
- }
- iounmap(cntctlbase);
As I just said in my reply to the same patch in v11, all of this is duplicating existing infrastructure that already exists for DT. Please consider decoupling the core driver code from the firmware side and make this reusable.
Great thanks for your help, I am working on it now. Any suggestion for other arm_arch_timer patches?
Thanks,
M.
From: Fu Wei fu.wei@linaro.org
This driver adds support for parsing SBSA Generic Watchdog timer in GTDT, parse all info in SBSA Generic Watchdog Structure in GTDT, and creating a platform device with that information.
This allows the operating system to obtain device data from the resource of platform device. The platform device named "sbsa-gwdt" can be used by the ARM SBSA Generic Watchdog driver.
Signed-off-by: Fu Wei fu.wei@linaro.org Signed-off-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/acpi/arm64/gtdt.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/watchdog/Kconfig | 1 + 2 files changed, 88 insertions(+)
diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c index b6021db..6d9fdd3 100644 --- a/drivers/acpi/arm64/gtdt.c +++ b/drivers/acpi/arm64/gtdt.c @@ -14,6 +14,7 @@ #include <linux/acpi.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_device.h>
#include <clocksource/arm_arch_timer.h>
@@ -220,3 +221,89 @@ int __init gtdt_arch_timer_mem_init(struct gt_block_data *data)
return index; } + +/* + * Initialize a SBSA generic Watchdog platform device info from GTDT + */ +static int __init gtdt_import_sbsa_gwdt(struct acpi_gtdt_watchdog *wd, + int index) +{ + struct platform_device *pdev; + int irq = map_gt_gsi(wd->timer_interrupt, wd->timer_flags); + int no_irq = 1; + + /* + * According to SBSA specification the size of refresh and control + * frames of SBSA Generic Watchdog is SZ_4K(Offset 0x000 – 0xFFF). + */ + struct resource res[] = { + DEFINE_RES_MEM(wd->control_frame_address, SZ_4K), + DEFINE_RES_MEM(wd->refresh_frame_address, SZ_4K), + DEFINE_RES_IRQ(irq), + }; + + pr_debug("found a Watchdog (0x%llx/0x%llx gsi:%u flags:0x%x).\n", + wd->refresh_frame_address, wd->control_frame_address, + wd->timer_interrupt, wd->timer_flags); + + if (!(wd->refresh_frame_address && wd->control_frame_address)) { + pr_err(FW_BUG "failed to get the Watchdog base address.\n"); + return -EINVAL; + } + + if (!wd->timer_interrupt) + pr_warn(FW_BUG "failed to get the Watchdog interrupt.\n"); + else if (irq <= 0) + pr_warn("failed to map the Watchdog interrupt.\n"); + else + no_irq = 0; + + /* + * Add a platform device named "sbsa-gwdt" to match the platform driver. + * "sbsa-gwdt": SBSA(Server Base System Architecture) Generic Watchdog + * The platform driver (like drivers/watchdog/sbsa_gwdt.c)can get device + * info below by matching this name. + */ + pdev = platform_device_register_simple("sbsa-gwdt", index, res, + ARRAY_SIZE(res) - no_irq); + if (IS_ERR(pdev)) { + acpi_unregister_gsi(wd->timer_interrupt); + return PTR_ERR(pdev); + } + + return 0; +} + +static int __init gtdt_sbsa_gwdt_init(void) +{ + struct acpi_table_header *table; + void *platform_timer; + int index = 0; + int ret; + + if (acpi_disabled) + return 0; + + if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_GTDT, 0, &table))) + return -EINVAL; + + ret = acpi_gtdt_init(table); + if (ret <= 0) + return ret; + + for_each_platform_timer(platform_timer) { + if (!is_watchdog(platform_timer)) + continue; + ret = gtdt_import_sbsa_gwdt(platform_timer, index); + if (ret) + break; + index++; + } + + if (index) + pr_info("found %d SBSA generic Watchdog(s).\n", index); + + return ret; +} + +device_initcall(gtdt_sbsa_gwdt_init); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 1bffe00..341964a 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -205,6 +205,7 @@ config ARM_SBSA_WATCHDOG tristate "ARM SBSA Generic Watchdog" depends on ARM64 depends on ARM_ARCH_TIMER + depends on ACPI_GTDT || !ACPI select WATCHDOG_CORE help ARM SBSA Generic Watchdog has two stage timeouts:
for sbsa watchdog part, Tested-by: wangxiongfeng2@huawei.com on D05 board.
On 2016/9/13 18:38, fu.wei@linaro.org wrote:
From: Fu Wei fu.wei@linaro.org
This patchset: (1)Preparation for adding GTDT support in arm_arch_timer: 1. Move some enums and marcos to header file; 2. Add a new enum for spi type; 3. Improve printk relevant code.
(2)Introduce ACPI GTDT parser: drivers/acpi/arm64/acpi_gtdt.c Parse all kinds of timer in GTDT table of ACPI:arch timer, memory-mapped timer and SBSA Generic Watchdog timer. This driver can help to simplify all the relevant timer drivers, and separate all the ACPI GTDT knowledge from them. (3)Simplify ACPI code for arm_arch_timer (4)Add GTDT support for ARM memory-mapped timer
This patchset depends on the following patchset: [UPDATE PATCH V11 1/8] ACPI: I/O Remapping Table (IORT) initial support https://lkml.org/lkml/2016/9/12/949
This patchset has been tested on the following platforms: (1)ARM Foundation v8 model
Changelog: v12: https://lkml.org/lkml/2016/9/13/ Rebase to latest Linux 4.8-rc6 Delete the confusing "skipping" in the error message.
V11: https://lkml.org/lkml/2016/9/6/354 Rebase to latest Linux 4.8-rc5 Delete typedef (suggested by checkpatch.pl)
V10: https://lkml.org/lkml/2016/7/26/215 Drop the "readq" patch. Rebase to latest Linux 4.7.
V9: https://lkml.org/lkml/2016/7/25/345 Improve pr_err message in acpi gtdt driver. Update Commit message for 7/9 shorten the irq mapping function name Improve GTDT driver for memory-mapped timer
v8: https://lkml.org/lkml/2016/7/19/660 Improve "pr_fmt(fmt)" definition: add "ACPI" in front of "GTDT", and also improve printk message. Simplify is_timer_block and is_watchdog. Merge acpi_gtdt_desc_init and gtdt_arch_timer_init into acpi_gtdt_init(); Delete __init in include/linux/acpi.h for GTDT API Make ARM64 select GTDT. Delete "#include <linux/module.h>" from acpi_gtdt.c Simplify GT block parse code.
v7: https://lkml.org/lkml/2016/7/13/769 Move the GTDT driver to drivers/acpi/arm64 Add add the ARM64-specific ACPI Support maintainers in MAINTAINERS Merge 3 patches of GTDT parser driver. Fix the for_each_platform_timer bug.
v6: https://lkml.org/lkml/2016/6/29/580 split the GTDT driver to 4 parts: basic, arch_timer, memory-mapped timer, and SBSA Generic Watchdog timer Improve driver by suggestions and example code from Daniel Lezcano
v5: https://lkml.org/lkml/2016/5/24/356 Sorting out all patches, simplify the API of GTDT driver: GTDT driver just fills the data struct for arm_arch_timer driver.
v4: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006667.html Delete the kvm relevant patches Separate two patches for sorting out the code for arm_arch_timer. Improve irq info export code to allow missing irq info in GTDT table.
v3: https://lkml.org/lkml/2016/2/1/658 Improve GTDT driver code: (1)improve pr_* by defining pr_fmt(fmt) (2)simplify gtdt_sbsa_gwdt_init (3)improve gtdt_arch_timer_data_init, if table is NULL, it will try to get GTDT table. Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr. Add arm_arch_timer get ppi from DT and GTDT support for kvm.
v2: https://lkml.org/lkml/2015/12/2/10 Rebase to latest kernel version(4.4-rc3). Fix the bug about the config problem, use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c
v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553
Fu Wei (8): clocksource/drivers/arm_arch_timer: Move enums and defines to header file clocksource/drivers/arm_arch_timer: Add a new enum for spi type clocksource/drivers/arm_arch_timer: Improve printk relevant code acpi/arm64: Add GTDT table parse driver clocksource/drivers/arm_arch_timer: Simplify ACPI support code. acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
arch/arm64/Kconfig | 1 + drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/gtdt.c | 309 +++++++++++++++++++++++++++++++++++ drivers/clocksource/Kconfig | 2 +- drivers/clocksource/arm_arch_timer.c | 225 +++++++++++++++++-------- drivers/watchdog/Kconfig | 1 + include/clocksource/arm_arch_timer.h | 32 ++++ include/linux/acpi.h | 7 + 9 files changed, 510 insertions(+), 71 deletions(-) create mode 100644 drivers/acpi/arm64/gtdt.c
Hi Wang Xiongfeng
On 29 September 2016 at 16:33, wangxiongfeng (C) wangxiongfeng2@huawei.com wrote:
for sbsa watchdog part, Tested-by: wangxiongfeng2@huawei.com on D05 board.
Great thanks for your testing. :-)
On 2016/9/13 18:38, fu.wei@linaro.org wrote:
From: Fu Wei fu.wei@linaro.org
This patchset: (1)Preparation for adding GTDT support in arm_arch_timer: 1. Move some enums and marcos to header file; 2. Add a new enum for spi type; 3. Improve printk relevant code.
(2)Introduce ACPI GTDT parser: drivers/acpi/arm64/acpi_gtdt.c Parse all kinds of timer in GTDT table of ACPI:arch timer, memory-mapped timer and SBSA Generic Watchdog timer. This driver can help to simplify all the relevant timer drivers, and separate all the ACPI GTDT knowledge from them. (3)Simplify ACPI code for arm_arch_timer (4)Add GTDT support for ARM memory-mapped timer
This patchset depends on the following patchset: [UPDATE PATCH V11 1/8] ACPI: I/O Remapping Table (IORT) initial support https://lkml.org/lkml/2016/9/12/949
This patchset has been tested on the following platforms: (1)ARM Foundation v8 model
Changelog: v12: https://lkml.org/lkml/2016/9/13/ Rebase to latest Linux 4.8-rc6 Delete the confusing "skipping" in the error message.
V11: https://lkml.org/lkml/2016/9/6/354 Rebase to latest Linux 4.8-rc5 Delete typedef (suggested by checkpatch.pl)
V10: https://lkml.org/lkml/2016/7/26/215 Drop the "readq" patch. Rebase to latest Linux 4.7.
V9: https://lkml.org/lkml/2016/7/25/345 Improve pr_err message in acpi gtdt driver. Update Commit message for 7/9 shorten the irq mapping function name Improve GTDT driver for memory-mapped timer
v8: https://lkml.org/lkml/2016/7/19/660 Improve "pr_fmt(fmt)" definition: add "ACPI" in front of "GTDT", and also improve printk message. Simplify is_timer_block and is_watchdog. Merge acpi_gtdt_desc_init and gtdt_arch_timer_init into acpi_gtdt_init(); Delete __init in include/linux/acpi.h for GTDT API Make ARM64 select GTDT. Delete "#include <linux/module.h>" from acpi_gtdt.c Simplify GT block parse code.
v7: https://lkml.org/lkml/2016/7/13/769 Move the GTDT driver to drivers/acpi/arm64 Add add the ARM64-specific ACPI Support maintainers in MAINTAINERS Merge 3 patches of GTDT parser driver. Fix the for_each_platform_timer bug.
v6: https://lkml.org/lkml/2016/6/29/580 split the GTDT driver to 4 parts: basic, arch_timer, memory-mapped timer, and SBSA Generic Watchdog timer Improve driver by suggestions and example code from Daniel Lezcano
v5: https://lkml.org/lkml/2016/5/24/356 Sorting out all patches, simplify the API of GTDT driver: GTDT driver just fills the data struct for arm_arch_timer driver.
v4: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006667.html Delete the kvm relevant patches Separate two patches for sorting out the code for arm_arch_timer. Improve irq info export code to allow missing irq info in GTDT table.
v3: https://lkml.org/lkml/2016/2/1/658 Improve GTDT driver code: (1)improve pr_* by defining pr_fmt(fmt) (2)simplify gtdt_sbsa_gwdt_init (3)improve gtdt_arch_timer_data_init, if table is NULL, it will try to get GTDT table. Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr. Add arm_arch_timer get ppi from DT and GTDT support for kvm.
v2: https://lkml.org/lkml/2015/12/2/10 Rebase to latest kernel version(4.4-rc3). Fix the bug about the config problem, use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c
v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553
Fu Wei (8): clocksource/drivers/arm_arch_timer: Move enums and defines to header file clocksource/drivers/arm_arch_timer: Add a new enum for spi type clocksource/drivers/arm_arch_timer: Improve printk relevant code acpi/arm64: Add GTDT table parse driver clocksource/drivers/arm_arch_timer: Simplify ACPI support code. acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
arch/arm64/Kconfig | 1 + drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/gtdt.c | 309 +++++++++++++++++++++++++++++++++++ drivers/clocksource/Kconfig | 2 +- drivers/clocksource/arm_arch_timer.c | 225 +++++++++++++++++-------- drivers/watchdog/Kconfig | 1 + include/clocksource/arm_arch_timer.h | 32 ++++ include/linux/acpi.h | 7 + 9 files changed, 510 insertions(+), 71 deletions(-) create mode 100644 drivers/acpi/arm64/gtdt.c