From: Al Stone ahs3@redhat.com

In preparation for adding some additional arch-dependent ACPI files, move the existing ones to a directory to try to keep clutter down in the arch/ia64/kernel directory.

There is no functional change. This patch only moves source files.

Signed-off-by: Al Stone al.stone@linaro.org --- arch/ia64/kernel/Makefile | 2 +- arch/ia64/kernel/acpi-ext.c | 104 ---- arch/ia64/kernel/acpi.c | 1000 -------------------------------------- arch/ia64/kernel/acpi/Makefile | 1 + arch/ia64/kernel/acpi/acpi-ext.c | 104 ++++ arch/ia64/kernel/acpi/acpi.c | 1000 ++++++++++++++++++++++++++++++++++++++ 6 files changed, 1106 insertions(+), 1105 deletions(-) delete mode 100644 arch/ia64/kernel/acpi-ext.c delete mode 100644 arch/ia64/kernel/acpi.c create mode 100644 arch/ia64/kernel/acpi/Makefile create mode 100644 arch/ia64/kernel/acpi/acpi-ext.c create mode 100644 arch/ia64/kernel/acpi/acpi.c

diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 20678a9..2218842 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -13,7 +13,7 @@ obj-y := entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64 salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \ unwind.o mca.o mca_asm.o topology.o dma-mapping.o

-obj-$(CONFIG_ACPI) += acpi.o acpi-ext.o +obj-y += acpi/ obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o

obj-$(CONFIG_IA64_PALINFO) += palinfo.o diff --git a/arch/ia64/kernel/acpi-ext.c b/arch/ia64/kernel/acpi-ext.c deleted file mode 100644 index 8b9318d..0000000 --- a/arch/ia64/kernel/acpi-ext.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (c) Copyright 2003, 2006 Hewlett-Packard Development Company, L.P. - * Alex Williamson alex.williamson@hp.com - * Bjorn Helgaas bjorn.helgaas@hp.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/acpi.h> - -#include <asm/acpi-ext.h> - -/* - * Device CSRs that do not appear in PCI config space should be described - * via ACPI. This would normally be done with Address Space Descriptors - * marked as "consumer-only," but old versions of Windows and Linux ignore - * the producer/consumer flag, so HP invented a vendor-defined resource to - * describe the location and size of CSR space. - */ - -struct acpi_vendor_uuid hp_ccsr_uuid = { - .subtype = 2, - .data = { 0xf9, 0xad, 0xe9, 0x69, 0x4f, 0x92, 0x5f, 0xab, 0xf6, 0x4a, - 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad }, -}; - -static acpi_status hp_ccsr_locate(acpi_handle obj, u64 *base, u64 *length) -{ - acpi_status status; - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - struct acpi_resource *resource; - struct acpi_resource_vendor_typed *vendor; - - status = acpi_get_vendor_resource(obj, METHOD_NAME__CRS, &hp_ccsr_uuid, - &buffer); - - resource = buffer.pointer; - vendor = &resource->data.vendor_typed; - - if (ACPI_FAILURE(status) || vendor->byte_length < 16) { - status = AE_NOT_FOUND; - goto exit; - } - - memcpy(base, vendor->byte_data, sizeof(*base)); - memcpy(length, vendor->byte_data + 8, sizeof(*length)); - - exit: - kfree(buffer.pointer); - return status; -} - -struct csr_space { - u64 base; - u64 length; -}; - -static acpi_status find_csr_space(struct acpi_resource *resource, void *data) -{ - struct csr_space *space = data; - struct acpi_resource_address64 addr; - acpi_status status; - - status = acpi_resource_to_address64(resource, &addr); - if (ACPI_SUCCESS(status) && - addr.resource_type == ACPI_MEMORY_RANGE && - addr.address_length && - addr.producer_consumer == ACPI_CONSUMER) { - space->base = addr.minimum; - space->length = addr.address_length; - return AE_CTRL_TERMINATE; - } - return AE_OK; /* keep looking */ -} - -static acpi_status hp_crs_locate(acpi_handle obj, u64 *base, u64 *length) -{ - struct csr_space space = { 0, 0 }; - - acpi_walk_resources(obj, METHOD_NAME__CRS, find_csr_space, &space); - if (!space.length) - return AE_NOT_FOUND; - - *base = space.base; - *length = space.length; - return AE_OK; -} - -acpi_status hp_acpi_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length) -{ - acpi_status status; - - status = hp_ccsr_locate(obj, csr_base, csr_length); - if (ACPI_SUCCESS(status)) - return status; - - return hp_crs_locate(obj, csr_base, csr_length); -} -EXPORT_SYMBOL(hp_acpi_csr_space); diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c deleted file mode 100644 index e795cb8..0000000 --- a/arch/ia64/kernel/acpi.c +++ /dev/null @@ -1,1000 +0,0 @@ -/* - * acpi.c - Architecture-Specific Low-Level ACPI Support - * - * Copyright (C) 1999 VA Linux Systems - * Copyright (C) 1999,2000 Walt Drummond drummond@valinux.com - * Copyright (C) 2000, 2002-2003 Hewlett-Packard Co. - * David Mosberger-Tang davidm@hpl.hp.com - * Copyright (C) 2000 Intel Corp. - * Copyright (C) 2000,2001 J.I. Lee jung-ik.lee@intel.com - * Copyright (C) 2001 Paul Diefenbaugh paul.s.diefenbaugh@intel.com - * Copyright (C) 2001 Jenna Hall jenna.s.hall@intel.com - * Copyright (C) 2001 Takayoshi Kochi t-kochi@bq.jp.nec.com - * Copyright (C) 2002 Erich Focht efocht@ess.nec.de - * Copyright (C) 2004 Ashok Raj ashok.raj@intel.com - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/irq.h> -#include <linux/acpi.h> -#include <linux/efi.h> -#include <linux/mmzone.h> -#include <linux/nodemask.h> -#include <linux/slab.h> -#include <acpi/processor.h> -#include <asm/io.h> -#include <asm/iosapic.h> -#include <asm/machvec.h> -#include <asm/page.h> -#include <asm/numa.h> -#include <asm/sal.h> -#include <asm/cyclone.h> - -#define PREFIX "ACPI: " - -int acpi_lapic; -unsigned int acpi_cpei_override; -unsigned int acpi_cpei_phys_cpuid; - -unsigned long acpi_wakeup_address = 0; - -#ifdef CONFIG_IA64_GENERIC -static unsigned long __init acpi_find_rsdp(void) -{ - unsigned long rsdp_phys = 0; - - if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) - rsdp_phys = efi.acpi20; - else if (efi.acpi != EFI_INVALID_TABLE_ADDR) - printk(KERN_WARNING PREFIX - "v1.0/r0.71 tables no longer supported\n"); - return rsdp_phys; -} - -const char __init * -acpi_get_sysname(void) -{ - unsigned long rsdp_phys; - struct acpi_table_rsdp *rsdp; - struct acpi_table_xsdt *xsdt; - struct acpi_table_header *hdr; -#ifdef CONFIG_INTEL_IOMMU - u64 i, nentries; -#endif - - rsdp_phys = acpi_find_rsdp(); - if (!rsdp_phys) { - printk(KERN_ERR - "ACPI 2.0 RSDP not found, default to "dig"\n"); - return "dig"; - } - - rsdp = (struct acpi_table_rsdp *)__va(rsdp_phys); - if (strncmp(rsdp->signature, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)) { - printk(KERN_ERR - "ACPI 2.0 RSDP signature incorrect, default to "dig"\n"); - return "dig"; - } - - xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_physical_address); - hdr = &xsdt->header; - if (strncmp(hdr->signature, ACPI_SIG_XSDT, sizeof(ACPI_SIG_XSDT) - 1)) { - printk(KERN_ERR - "ACPI 2.0 XSDT signature incorrect, default to "dig"\n"); - return "dig"; - } - - if (!strcmp(hdr->oem_id, "HP")) { - return "hpzx1"; - } else if (!strcmp(hdr->oem_id, "SGI")) { - if (!strcmp(hdr->oem_table_id + 4, "UV")) - return "uv"; - else - return "sn2"; - } - -#ifdef CONFIG_INTEL_IOMMU - /* Look for Intel IOMMU */ - nentries = (hdr->length - sizeof(*hdr)) / - sizeof(xsdt->table_offset_entry[0]); - for (i = 0; i < nentries; i++) { - hdr = __va(xsdt->table_offset_entry[i]); - if (strncmp(hdr->signature, ACPI_SIG_DMAR, - sizeof(ACPI_SIG_DMAR) - 1) == 0) - return "dig_vtd"; - } -#endif - - return "dig"; -} -#endif /* CONFIG_IA64_GENERIC */ - -#define ACPI_MAX_PLATFORM_INTERRUPTS 256 - -/* Array to record platform interrupt vectors for generic interrupt routing. */ -int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = { - [0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1 -}; - -enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC; - -/* - * Interrupt routing API for device drivers. Provides interrupt vector for - * a generic platform event. Currently only CPEI is implemented. - */ -int acpi_request_vector(u32 int_type) -{ - int vector = -1; - - if (int_type < ACPI_MAX_PLATFORM_INTERRUPTS) { - /* corrected platform error interrupt */ - vector = platform_intr_list[int_type]; - } else - printk(KERN_ERR - "acpi_request_vector(): invalid interrupt type\n"); - return vector; -} - -char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size) -{ - return __va(phys_addr); -} - -void __init __acpi_unmap_table(char *map, unsigned long size) -{ -} - -/* -------------------------------------------------------------------------- - Boot-time Table Parsing - -------------------------------------------------------------------------- */ - -static int available_cpus __initdata; -struct acpi_table_madt *acpi_madt __initdata; -static u8 has_8259; - -static int __init -acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header, - const unsigned long end) -{ - struct acpi_madt_local_apic_override *lapic; - - lapic = (struct acpi_madt_local_apic_override *)header; - - if (BAD_MADT_ENTRY(lapic, end)) - return -EINVAL; - - if (lapic->address) { - iounmap(ipi_base_addr); - ipi_base_addr = ioremap(lapic->address, 0); - } - return 0; -} - -static int __init -acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end) -{ - struct acpi_madt_local_sapic *lsapic; - - lsapic = (struct acpi_madt_local_sapic *)header; - - /*Skip BAD_MADT_ENTRY check, as lsapic size could vary */ - - if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { -#ifdef CONFIG_SMP - smp_boot_data.cpu_phys_id[available_cpus] = - (lsapic->id << 8) | lsapic->eid; -#endif - ++available_cpus; - } - - total_cpus++; - return 0; -} - -static int __init -acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end) -{ - struct acpi_madt_local_apic_nmi *lacpi_nmi; - - lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header; - - if (BAD_MADT_ENTRY(lacpi_nmi, end)) - return -EINVAL; - - /* TBD: Support lapic_nmi entries */ - return 0; -} - -static int __init -acpi_parse_iosapic(struct acpi_subtable_header * header, const unsigned long end) -{ - struct acpi_madt_io_sapic *iosapic; - - iosapic = (struct acpi_madt_io_sapic *)header; - - if (BAD_MADT_ENTRY(iosapic, end)) - return -EINVAL; - - return iosapic_init(iosapic->address, iosapic->global_irq_base); -} - -static unsigned int __initdata acpi_madt_rev; - -static int __init -acpi_parse_plat_int_src(struct acpi_subtable_header * header, - const unsigned long end) -{ - struct acpi_madt_interrupt_source *plintsrc; - int vector; - - plintsrc = (struct acpi_madt_interrupt_source *)header; - - if (BAD_MADT_ENTRY(plintsrc, end)) - return -EINVAL; - - /* - * Get vector assignment for this interrupt, set attributes, - * and program the IOSAPIC routing table. - */ - vector = iosapic_register_platform_intr(plintsrc->type, - plintsrc->global_irq, - plintsrc->io_sapic_vector, - plintsrc->eid, - plintsrc->id, - ((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) == - ACPI_MADT_POLARITY_ACTIVE_HIGH) ? - IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - ((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) == - ACPI_MADT_TRIGGER_EDGE) ? - IOSAPIC_EDGE : IOSAPIC_LEVEL); - - platform_intr_list[plintsrc->type] = vector; - if (acpi_madt_rev > 1) { - acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE; - } - - /* - * Save the physical id, so we can check when its being removed - */ - acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff; - - return 0; -} - -#ifdef CONFIG_HOTPLUG_CPU -unsigned int can_cpei_retarget(void) -{ - extern int cpe_vector; - extern unsigned int force_cpei_retarget; - - /* - * Only if CPEI is supported and the override flag - * is present, otherwise return that its re-targettable - * if we are in polling mode. - */ - if (cpe_vector > 0) { - if (acpi_cpei_override || force_cpei_retarget) - return 1; - else - return 0; - } - return 1; -} - -unsigned int is_cpu_cpei_target(unsigned int cpu) -{ - unsigned int logical_id; - - logical_id = cpu_logical_id(acpi_cpei_phys_cpuid); - - if (logical_id == cpu) - return 1; - else - return 0; -} - -void set_cpei_target_cpu(unsigned int cpu) -{ - acpi_cpei_phys_cpuid = cpu_physical_id(cpu); -} -#endif - -unsigned int get_cpei_target_cpu(void) -{ - return acpi_cpei_phys_cpuid; -} - -static int __init -acpi_parse_int_src_ovr(struct acpi_subtable_header * header, - const unsigned long end) -{ - struct acpi_madt_interrupt_override *p; - - p = (struct acpi_madt_interrupt_override *)header; - - if (BAD_MADT_ENTRY(p, end)) - return -EINVAL; - - iosapic_override_isa_irq(p->source_irq, p->global_irq, - ((p->inti_flags & ACPI_MADT_POLARITY_MASK) == - ACPI_MADT_POLARITY_ACTIVE_LOW) ? - IOSAPIC_POL_LOW : IOSAPIC_POL_HIGH, - ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) == - ACPI_MADT_TRIGGER_LEVEL) ? - IOSAPIC_LEVEL : IOSAPIC_EDGE); - return 0; -} - -static int __init -acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end) -{ - struct acpi_madt_nmi_source *nmi_src; - - nmi_src = (struct acpi_madt_nmi_source *)header; - - if (BAD_MADT_ENTRY(nmi_src, end)) - return -EINVAL; - - /* TBD: Support nimsrc entries */ - return 0; -} - -static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) { - - /* - * Unfortunately ITC_DRIFT is not yet part of the - * official SAL spec, so the ITC_DRIFT bit is not - * set by the BIOS on this hardware. - */ - sal_platform_features |= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT; - - cyclone_setup(); - } -} - -static int __init acpi_parse_madt(struct acpi_table_header *table) -{ - if (!table) - return -EINVAL; - - acpi_madt = (struct acpi_table_madt *)table; - - acpi_madt_rev = acpi_madt->header.revision; - - /* remember the value for reference after free_initmem() */ -#ifdef CONFIG_ITANIUM - has_8259 = 1; /* Firmware on old Itanium systems is broken */ -#else - has_8259 = acpi_madt->flags & ACPI_MADT_PCAT_COMPAT; -#endif - iosapic_system_init(has_8259); - - /* Get base address of IPI Message Block */ - - if (acpi_madt->address) - ipi_base_addr = ioremap(acpi_madt->address, 0); - - printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); - - acpi_madt_oem_check(acpi_madt->header.oem_id, - acpi_madt->header.oem_table_id); - - return 0; -} - -#ifdef CONFIG_ACPI_NUMA - -#undef SLIT_DEBUG - -#define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32) - -static int __initdata srat_num_cpus; /* number of cpus */ -static u32 pxm_flag[PXM_FLAG_LEN]; -#define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag)) -#define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag)) -static struct acpi_table_slit __initdata *slit_table; -cpumask_t early_cpu_possible_map = CPU_MASK_NONE; - -static int __init -get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa) -{ - int pxm; - - pxm = pa->proximity_domain_lo; - if (ia64_platform_is("sn2") || acpi_srat_revision >= 2) - pxm += pa->proximity_domain_hi[0] << 8; - return pxm; -} - -static int __init -get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma) -{ - int pxm; - - pxm = ma->proximity_domain; - if (!ia64_platform_is("sn2") && acpi_srat_revision <= 1) - pxm &= 0xff; - - return pxm; -} - -/* - * ACPI 2.0 SLIT (System Locality Information Table) - * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf - */ -void __init acpi_numa_slit_init(struct acpi_table_slit *slit) -{ - u32 len; - - len = sizeof(struct acpi_table_header) + 8 - + slit->locality_count * slit->locality_count; - if (slit->header.length != len) { - printk(KERN_ERR - "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", - len, slit->header.length); - return; - } - slit_table = slit; -} - -void __init -acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) -{ - int pxm; - - if (!(pa->flags & ACPI_SRAT_CPU_ENABLED)) - return; - - if (srat_num_cpus >= ARRAY_SIZE(node_cpuid)) { - printk_once(KERN_WARNING - "node_cpuid[%ld] is too small, may not be able to use all cpus\n", - ARRAY_SIZE(node_cpuid)); - return; - } - pxm = get_processor_proximity_domain(pa); - - /* record this node in proximity bitmap */ - pxm_bit_set(pxm); - - node_cpuid[srat_num_cpus].phys_id = - (pa->apic_id << 8) | (pa->local_sapic_eid); - /* nid should be overridden as logical node id later */ - node_cpuid[srat_num_cpus].nid = pxm; - cpu_set(srat_num_cpus, early_cpu_possible_map); - srat_num_cpus++; -} - -int __init -acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) -{ - unsigned long paddr, size; - int pxm; - struct node_memblk_s *p, *q, *pend; - - pxm = get_memory_proximity_domain(ma); - - /* fill node memory chunk structure */ - paddr = ma->base_address; - size = ma->length; - - /* Ignore disabled entries */ - if (!(ma->flags & ACPI_SRAT_MEM_ENABLED)) - return -1; - - /* record this node in proximity bitmap */ - pxm_bit_set(pxm); - - /* Insertion sort based on base address */ - pend = &node_memblk[num_node_memblks]; - for (p = &node_memblk[0]; p < pend; p++) { - if (paddr < p->start_paddr) - break; - } - if (p < pend) { - for (q = pend - 1; q >= p; q--) - *(q + 1) = *q; - } - p->start_paddr = paddr; - p->size = size; - p->nid = pxm; - num_node_memblks++; - return 0; -} - -void __init acpi_numa_arch_fixup(void) -{ - int i, j, node_from, node_to; - - /* If there's no SRAT, fix the phys_id and mark node 0 online */ - if (srat_num_cpus == 0) { - node_set_online(0); - node_cpuid[0].phys_id = hard_smp_processor_id(); - return; - } - - /* - * MCD - This can probably be dropped now. No need for pxm ID to node ID - * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES. - */ - nodes_clear(node_online_map); - for (i = 0; i < MAX_PXM_DOMAINS; i++) { - if (pxm_bit_test(i)) { - int nid = acpi_map_pxm_to_node(i); - node_set_online(nid); - } - } - - /* set logical node id in memory chunk structure */ - for (i = 0; i < num_node_memblks; i++) - node_memblk[i].nid = pxm_to_node(node_memblk[i].nid); - - /* assign memory bank numbers for each chunk on each node */ - for_each_online_node(i) { - int bank; - - bank = 0; - for (j = 0; j < num_node_memblks; j++) - if (node_memblk[j].nid == i) - node_memblk[j].bank = bank++; - } - - /* set logical node id in cpu structure */ - for_each_possible_early_cpu(i) - node_cpuid[i].nid = pxm_to_node(node_cpuid[i].nid); - - printk(KERN_INFO "Number of logical nodes in system = %d\n", - num_online_nodes()); - printk(KERN_INFO "Number of memory chunks in system = %d\n", - num_node_memblks); - - if (!slit_table) { - for (i = 0; i < MAX_NUMNODES; i++) - for (j = 0; j < MAX_NUMNODES; j++) - node_distance(i, j) = i == j ? LOCAL_DISTANCE : - REMOTE_DISTANCE; - return; - } - - memset(numa_slit, -1, sizeof(numa_slit)); - for (i = 0; i < slit_table->locality_count; i++) { - if (!pxm_bit_test(i)) - continue; - node_from = pxm_to_node(i); - for (j = 0; j < slit_table->locality_count; j++) { - if (!pxm_bit_test(j)) - continue; - node_to = pxm_to_node(j); - node_distance(node_from, node_to) = - slit_table->entry[i * slit_table->locality_count + j]; - } - } - -#ifdef SLIT_DEBUG - printk("ACPI 2.0 SLIT locality table:\n"); - for_each_online_node(i) { - for_each_online_node(j) - printk("%03d ", node_distance(i, j)); - printk("\n"); - } -#endif -} -#endif /* CONFIG_ACPI_NUMA */ - -/* - * success: return IRQ number (>=0) - * failure: return < 0 - */ -int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) -{ - if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) - return gsi; - - if (has_8259 && gsi < 16) - return isa_irq_to_vector(gsi); - - return iosapic_register_intr(gsi, - (polarity == - ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : - IOSAPIC_POL_LOW, - (triggering == - ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : - IOSAPIC_LEVEL); -} -EXPORT_SYMBOL_GPL(acpi_register_gsi); - -void acpi_unregister_gsi(u32 gsi) -{ - if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) - return; - - if (has_8259 && gsi < 16) - return; - - iosapic_unregister_intr(gsi); -} -EXPORT_SYMBOL_GPL(acpi_unregister_gsi); - -static int __init acpi_parse_fadt(struct acpi_table_header *table) -{ - struct acpi_table_header *fadt_header; - struct acpi_table_fadt *fadt; - - if (!table) - return -EINVAL; - - fadt_header = (struct acpi_table_header *)table; - if (fadt_header->revision != 3) - return -ENODEV; /* Only deal with ACPI 2.0 FADT */ - - fadt = (struct acpi_table_fadt *)fadt_header; - - acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, - ACPI_ACTIVE_LOW); - return 0; -} - -int __init early_acpi_boot_init(void) -{ - int ret; - - /* - * do a partial walk of MADT to determine how many CPUs - * we have including offline CPUs - */ - if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { - printk(KERN_ERR PREFIX "Can't find MADT\n"); - return 0; - } - - ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, - acpi_parse_lsapic, NR_CPUS); - if (ret < 1) - printk(KERN_ERR PREFIX - "Error parsing MADT - no LAPIC entries\n"); - else - acpi_lapic = 1; - -#ifdef CONFIG_SMP - if (available_cpus == 0) { - printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); - printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); - smp_boot_data.cpu_phys_id[available_cpus] = - hard_smp_processor_id(); - available_cpus = 1; /* We've got at least one of these, no? */ - } - smp_boot_data.cpu_count = available_cpus; -#endif - /* Make boot-up look pretty */ - printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, - total_cpus); - - return 0; -} - -int __init acpi_boot_init(void) -{ - - /* - * MADT - * ---- - * Parse the Multiple APIC Description Table (MADT), if exists. - * Note that this table provides platform SMP configuration - * information -- the successor to MPS tables. - */ - - if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { - printk(KERN_ERR PREFIX "Can't find MADT\n"); - goto skip_madt; - } - - /* Local APIC */ - - if (acpi_table_parse_madt - (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0) - printk(KERN_ERR PREFIX - "Error parsing LAPIC address override entry\n"); - - if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0) - < 0) - printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); - - /* I/O APIC */ - - if (acpi_table_parse_madt - (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) { - if (!ia64_platform_is("sn2")) - printk(KERN_ERR PREFIX - "Error parsing MADT - no IOSAPIC entries\n"); - } - - /* System-Level Interrupt Routing */ - - if (acpi_table_parse_madt - (ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src, - ACPI_MAX_PLATFORM_INTERRUPTS) < 0) - printk(KERN_ERR PREFIX - "Error parsing platform interrupt source entry\n"); - - if (acpi_table_parse_madt - (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0) - printk(KERN_ERR PREFIX - "Error parsing interrupt source overrides entry\n"); - - if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0) - printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); - skip_madt: - - /* - * FADT says whether a legacy keyboard controller is present. - * The FADT also contains an SCI_INT line, by which the system - * gets interrupts such as power and sleep buttons. If it's not - * on a Legacy interrupt, it needs to be setup. - */ - if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt)) - printk(KERN_ERR PREFIX "Can't find FADT\n"); - -#ifdef CONFIG_ACPI_NUMA -#ifdef CONFIG_SMP - if (srat_num_cpus == 0) { - int cpu, i = 1; - for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++) - if (smp_boot_data.cpu_phys_id[cpu] != - hard_smp_processor_id()) - node_cpuid[i++].phys_id = - smp_boot_data.cpu_phys_id[cpu]; - } -#endif - build_cpu_to_node_map(); -#endif - return 0; -} - -int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) -{ - int tmp; - - if (has_8259 && gsi < 16) - *irq = isa_irq_to_vector(gsi); - else { - tmp = gsi_to_irq(gsi); - if (tmp == -1) - return -1; - *irq = tmp; - } - return 0; -} - -int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi) -{ - if (isa_irq >= 16) - return -1; - *gsi = isa_irq; - return 0; -} - -/* - * ACPI based hotplug CPU support - */ -#ifdef CONFIG_ACPI_HOTPLUG_CPU -static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid) -{ -#ifdef CONFIG_ACPI_NUMA - /* - * We don't have cpu-only-node hotadd. But if the system equips - * SRAT table, pxm is already found and node is ready. - * So, just pxm_to_nid(pxm) is OK. - * This code here is for the system which doesn't have full SRAT - * table for possible cpus. - */ - node_cpuid[cpu].phys_id = physid; - node_cpuid[cpu].nid = acpi_get_node(handle); -#endif - return 0; -} - -int additional_cpus __initdata = -1; - -static __init int setup_additional_cpus(char *s) -{ - if (s) - additional_cpus = simple_strtol(s, NULL, 0); - - return 0; -} - -early_param("additional_cpus", setup_additional_cpus); - -/* - * cpu_possible_mask should be static, it cannot change as CPUs - * are onlined, or offlined. The reason is per-cpu data-structures - * are allocated by some modules at init time, and dont expect to - * do this dynamically on cpu arrival/departure. - * cpu_present_mask on the other hand can change dynamically. - * In case when cpu_hotplug is not compiled, then we resort to current - * behaviour, which is cpu_possible == cpu_present. - * - Ashok Raj - * - * Three ways to find out the number of additional hotplug CPUs: - * - If the BIOS specified disabled CPUs in ACPI/mptables use that. - * - The user can overwrite it with additional_cpus=NUM - * - Otherwise don't reserve additional CPUs. - */ -__init void prefill_possible_map(void) -{ - int i; - int possible, disabled_cpus; - - disabled_cpus = total_cpus - available_cpus; - - if (additional_cpus == -1) { - if (disabled_cpus > 0) - additional_cpus = disabled_cpus; - else - additional_cpus = 0; - } - - possible = available_cpus + additional_cpus; - - if (possible > nr_cpu_ids) - possible = nr_cpu_ids; - - printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", - possible, max((possible - available_cpus), 0)); - - for (i = 0; i < possible; i++) - set_cpu_possible(i, true); -} - -static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) -{ - cpumask_t tmp_map; - int cpu; - - cpumask_complement(&tmp_map, cpu_present_mask); - cpu = cpumask_first(&tmp_map); - if (cpu >= nr_cpu_ids) - return -EINVAL; - - acpi_map_cpu2node(handle, cpu, physid); - - set_cpu_present(cpu, true); - ia64_cpu_to_sapicid[cpu] = physid; - - acpi_processor_set_pdc(handle); - - *pcpu = cpu; - return (0); -} - -/* wrapper to silence section mismatch warning */ -int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu) -{ - return _acpi_map_lsapic(handle, physid, pcpu); -} -EXPORT_SYMBOL(acpi_map_cpu); - -int acpi_unmap_cpu(int cpu) -{ - ia64_cpu_to_sapicid[cpu] = -1; - set_cpu_present(cpu, false); - -#ifdef CONFIG_ACPI_NUMA - /* NUMA specific cleanup's */ -#endif - - return (0); -} -EXPORT_SYMBOL(acpi_unmap_cpu); -#endif /* CONFIG_ACPI_HOTPLUG_CPU */ - -#ifdef CONFIG_ACPI_NUMA -static acpi_status acpi_map_iosapic(acpi_handle handle, u32 depth, - void *context, void **ret) -{ - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *obj; - struct acpi_madt_io_sapic *iosapic; - unsigned int gsi_base; - int node; - - /* Only care about objects w/ a method that returns the MADT */ - if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) - return AE_OK; - - if (!buffer.length || !buffer.pointer) - return AE_OK; - - obj = buffer.pointer; - if (obj->type != ACPI_TYPE_BUFFER || - obj->buffer.length < sizeof(*iosapic)) { - kfree(buffer.pointer); - return AE_OK; - } - - iosapic = (struct acpi_madt_io_sapic *)obj->buffer.pointer; - - if (iosapic->header.type != ACPI_MADT_TYPE_IO_SAPIC) { - kfree(buffer.pointer); - return AE_OK; - } - - gsi_base = iosapic->global_irq_base; - - kfree(buffer.pointer); - - /* OK, it's an IOSAPIC MADT entry; associate it with a node */ - node = acpi_get_node(handle); - if (node == NUMA_NO_NODE || !node_online(node) || - cpumask_empty(cpumask_of_node(node))) - return AE_OK; - - /* We know a gsi to node mapping! */ - map_iosapic_to_node(gsi_base, node); - return AE_OK; -} - -static int __init -acpi_map_iosapics (void) -{ - acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL); - return 0; -} - -fs_initcall(acpi_map_iosapics); -#endif /* CONFIG_ACPI_NUMA */ - -int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) -{ - int err; - - if ((err = iosapic_init(phys_addr, gsi_base))) - return err; - -#ifdef CONFIG_ACPI_NUMA - acpi_map_iosapic(handle, 0, NULL, NULL); -#endif /* CONFIG_ACPI_NUMA */ - - return 0; -} - -EXPORT_SYMBOL(acpi_register_ioapic); - -int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) -{ - return iosapic_remove(gsi_base); -} - -EXPORT_SYMBOL(acpi_unregister_ioapic); - -/* - * acpi_suspend_lowlevel() - save kernel state and suspend. - * - * TBD when when IA64 starts to support suspend... - */ -int acpi_suspend_lowlevel(void) { return 0; } diff --git a/arch/ia64/kernel/acpi/Makefile b/arch/ia64/kernel/acpi/Makefile new file mode 100644 index 0000000..8c12745 --- /dev/null +++ b/arch/ia64/kernel/acpi/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ACPI) += acpi.o acpi-ext.o diff --git a/arch/ia64/kernel/acpi/acpi-ext.c b/arch/ia64/kernel/acpi/acpi-ext.c new file mode 100644 index 0000000..8b9318d --- /dev/null +++ b/arch/ia64/kernel/acpi/acpi-ext.c @@ -0,0 +1,104 @@ +/* + * (c) Copyright 2003, 2006 Hewlett-Packard Development Company, L.P. + * Alex Williamson alex.williamson@hp.com + * Bjorn Helgaas bjorn.helgaas@hp.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/acpi.h> + +#include <asm/acpi-ext.h> + +/* + * Device CSRs that do not appear in PCI config space should be described + * via ACPI. This would normally be done with Address Space Descriptors + * marked as "consumer-only," but old versions of Windows and Linux ignore + * the producer/consumer flag, so HP invented a vendor-defined resource to + * describe the location and size of CSR space. + */ + +struct acpi_vendor_uuid hp_ccsr_uuid = { + .subtype = 2, + .data = { 0xf9, 0xad, 0xe9, 0x69, 0x4f, 0x92, 0x5f, 0xab, 0xf6, 0x4a, + 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad }, +}; + +static acpi_status hp_ccsr_locate(acpi_handle obj, u64 *base, u64 *length) +{ + acpi_status status; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_resource *resource; + struct acpi_resource_vendor_typed *vendor; + + status = acpi_get_vendor_resource(obj, METHOD_NAME__CRS, &hp_ccsr_uuid, + &buffer); + + resource = buffer.pointer; + vendor = &resource->data.vendor_typed; + + if (ACPI_FAILURE(status) || vendor->byte_length < 16) { + status = AE_NOT_FOUND; + goto exit; + } + + memcpy(base, vendor->byte_data, sizeof(*base)); + memcpy(length, vendor->byte_data + 8, sizeof(*length)); + + exit: + kfree(buffer.pointer); + return status; +} + +struct csr_space { + u64 base; + u64 length; +}; + +static acpi_status find_csr_space(struct acpi_resource *resource, void *data) +{ + struct csr_space *space = data; + struct acpi_resource_address64 addr; + acpi_status status; + + status = acpi_resource_to_address64(resource, &addr); + if (ACPI_SUCCESS(status) && + addr.resource_type == ACPI_MEMORY_RANGE && + addr.address_length && + addr.producer_consumer == ACPI_CONSUMER) { + space->base = addr.minimum; + space->length = addr.address_length; + return AE_CTRL_TERMINATE; + } + return AE_OK; /* keep looking */ +} + +static acpi_status hp_crs_locate(acpi_handle obj, u64 *base, u64 *length) +{ + struct csr_space space = { 0, 0 }; + + acpi_walk_resources(obj, METHOD_NAME__CRS, find_csr_space, &space); + if (!space.length) + return AE_NOT_FOUND; + + *base = space.base; + *length = space.length; + return AE_OK; +} + +acpi_status hp_acpi_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length) +{ + acpi_status status; + + status = hp_ccsr_locate(obj, csr_base, csr_length); + if (ACPI_SUCCESS(status)) + return status; + + return hp_crs_locate(obj, csr_base, csr_length); +} +EXPORT_SYMBOL(hp_acpi_csr_space); diff --git a/arch/ia64/kernel/acpi/acpi.c b/arch/ia64/kernel/acpi/acpi.c new file mode 100644 index 0000000..e795cb8 --- /dev/null +++ b/arch/ia64/kernel/acpi/acpi.c @@ -0,0 +1,1000 @@ +/* + * acpi.c - Architecture-Specific Low-Level ACPI Support + * + * Copyright (C) 1999 VA Linux Systems + * Copyright (C) 1999,2000 Walt Drummond drummond@valinux.com + * Copyright (C) 2000, 2002-2003 Hewlett-Packard Co. + * David Mosberger-Tang davidm@hpl.hp.com + * Copyright (C) 2000 Intel Corp. + * Copyright (C) 2000,2001 J.I. Lee jung-ik.lee@intel.com + * Copyright (C) 2001 Paul Diefenbaugh paul.s.diefenbaugh@intel.com + * Copyright (C) 2001 Jenna Hall jenna.s.hall@intel.com + * Copyright (C) 2001 Takayoshi Kochi t-kochi@bq.jp.nec.com + * Copyright (C) 2002 Erich Focht efocht@ess.nec.de + * Copyright (C) 2004 Ashok Raj ashok.raj@intel.com + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/irq.h> +#include <linux/acpi.h> +#include <linux/efi.h> +#include <linux/mmzone.h> +#include <linux/nodemask.h> +#include <linux/slab.h> +#include <acpi/processor.h> +#include <asm/io.h> +#include <asm/iosapic.h> +#include <asm/machvec.h> +#include <asm/page.h> +#include <asm/numa.h> +#include <asm/sal.h> +#include <asm/cyclone.h> + +#define PREFIX "ACPI: " + +int acpi_lapic; +unsigned int acpi_cpei_override; +unsigned int acpi_cpei_phys_cpuid; + +unsigned long acpi_wakeup_address = 0; + +#ifdef CONFIG_IA64_GENERIC +static unsigned long __init acpi_find_rsdp(void) +{ + unsigned long rsdp_phys = 0; + + if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) + rsdp_phys = efi.acpi20; + else if (efi.acpi != EFI_INVALID_TABLE_ADDR) + printk(KERN_WARNING PREFIX + "v1.0/r0.71 tables no longer supported\n"); + return rsdp_phys; +} + +const char __init * +acpi_get_sysname(void) +{ + unsigned long rsdp_phys; + struct acpi_table_rsdp *rsdp; + struct acpi_table_xsdt *xsdt; + struct acpi_table_header *hdr; +#ifdef CONFIG_INTEL_IOMMU + u64 i, nentries; +#endif + + rsdp_phys = acpi_find_rsdp(); + if (!rsdp_phys) { + printk(KERN_ERR + "ACPI 2.0 RSDP not found, default to "dig"\n"); + return "dig"; + } + + rsdp = (struct acpi_table_rsdp *)__va(rsdp_phys); + if (strncmp(rsdp->signature, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)) { + printk(KERN_ERR + "ACPI 2.0 RSDP signature incorrect, default to "dig"\n"); + return "dig"; + } + + xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_physical_address); + hdr = &xsdt->header; + if (strncmp(hdr->signature, ACPI_SIG_XSDT, sizeof(ACPI_SIG_XSDT) - 1)) { + printk(KERN_ERR + "ACPI 2.0 XSDT signature incorrect, default to "dig"\n"); + return "dig"; + } + + if (!strcmp(hdr->oem_id, "HP")) { + return "hpzx1"; + } else if (!strcmp(hdr->oem_id, "SGI")) { + if (!strcmp(hdr->oem_table_id + 4, "UV")) + return "uv"; + else + return "sn2"; + } + +#ifdef CONFIG_INTEL_IOMMU + /* Look for Intel IOMMU */ + nentries = (hdr->length - sizeof(*hdr)) / + sizeof(xsdt->table_offset_entry[0]); + for (i = 0; i < nentries; i++) { + hdr = __va(xsdt->table_offset_entry[i]); + if (strncmp(hdr->signature, ACPI_SIG_DMAR, + sizeof(ACPI_SIG_DMAR) - 1) == 0) + return "dig_vtd"; + } +#endif + + return "dig"; +} +#endif /* CONFIG_IA64_GENERIC */ + +#define ACPI_MAX_PLATFORM_INTERRUPTS 256 + +/* Array to record platform interrupt vectors for generic interrupt routing. */ +int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = { + [0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1 +}; + +enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC; + +/* + * Interrupt routing API for device drivers. Provides interrupt vector for + * a generic platform event. Currently only CPEI is implemented. + */ +int acpi_request_vector(u32 int_type) +{ + int vector = -1; + + if (int_type < ACPI_MAX_PLATFORM_INTERRUPTS) { + /* corrected platform error interrupt */ + vector = platform_intr_list[int_type]; + } else + printk(KERN_ERR + "acpi_request_vector(): invalid interrupt type\n"); + return vector; +} + +char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size) +{ + return __va(phys_addr); +} + +void __init __acpi_unmap_table(char *map, unsigned long size) +{ +} + +/* -------------------------------------------------------------------------- + Boot-time Table Parsing + -------------------------------------------------------------------------- */ + +static int available_cpus __initdata; +struct acpi_table_madt *acpi_madt __initdata; +static u8 has_8259; + +static int __init +acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header, + const unsigned long end) +{ + struct acpi_madt_local_apic_override *lapic; + + lapic = (struct acpi_madt_local_apic_override *)header; + + if (BAD_MADT_ENTRY(lapic, end)) + return -EINVAL; + + if (lapic->address) { + iounmap(ipi_base_addr); + ipi_base_addr = ioremap(lapic->address, 0); + } + return 0; +} + +static int __init +acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end) +{ + struct acpi_madt_local_sapic *lsapic; + + lsapic = (struct acpi_madt_local_sapic *)header; + + /*Skip BAD_MADT_ENTRY check, as lsapic size could vary */ + + if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { +#ifdef CONFIG_SMP + smp_boot_data.cpu_phys_id[available_cpus] = + (lsapic->id << 8) | lsapic->eid; +#endif + ++available_cpus; + } + + total_cpus++; + return 0; +} + +static int __init +acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end) +{ + struct acpi_madt_local_apic_nmi *lacpi_nmi; + + lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header; + + if (BAD_MADT_ENTRY(lacpi_nmi, end)) + return -EINVAL; + + /* TBD: Support lapic_nmi entries */ + return 0; +} + +static int __init +acpi_parse_iosapic(struct acpi_subtable_header * header, const unsigned long end) +{ + struct acpi_madt_io_sapic *iosapic; + + iosapic = (struct acpi_madt_io_sapic *)header; + + if (BAD_MADT_ENTRY(iosapic, end)) + return -EINVAL; + + return iosapic_init(iosapic->address, iosapic->global_irq_base); +} + +static unsigned int __initdata acpi_madt_rev; + +static int __init +acpi_parse_plat_int_src(struct acpi_subtable_header * header, + const unsigned long end) +{ + struct acpi_madt_interrupt_source *plintsrc; + int vector; + + plintsrc = (struct acpi_madt_interrupt_source *)header; + + if (BAD_MADT_ENTRY(plintsrc, end)) + return -EINVAL; + + /* + * Get vector assignment for this interrupt, set attributes, + * and program the IOSAPIC routing table. + */ + vector = iosapic_register_platform_intr(plintsrc->type, + plintsrc->global_irq, + plintsrc->io_sapic_vector, + plintsrc->eid, + plintsrc->id, + ((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) == + ACPI_MADT_POLARITY_ACTIVE_HIGH) ? + IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, + ((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) == + ACPI_MADT_TRIGGER_EDGE) ? + IOSAPIC_EDGE : IOSAPIC_LEVEL); + + platform_intr_list[plintsrc->type] = vector; + if (acpi_madt_rev > 1) { + acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE; + } + + /* + * Save the physical id, so we can check when its being removed + */ + acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff; + + return 0; +} + +#ifdef CONFIG_HOTPLUG_CPU +unsigned int can_cpei_retarget(void) +{ + extern int cpe_vector; + extern unsigned int force_cpei_retarget; + + /* + * Only if CPEI is supported and the override flag + * is present, otherwise return that its re-targettable + * if we are in polling mode. + */ + if (cpe_vector > 0) { + if (acpi_cpei_override || force_cpei_retarget) + return 1; + else + return 0; + } + return 1; +} + +unsigned int is_cpu_cpei_target(unsigned int cpu) +{ + unsigned int logical_id; + + logical_id = cpu_logical_id(acpi_cpei_phys_cpuid); + + if (logical_id == cpu) + return 1; + else + return 0; +} + +void set_cpei_target_cpu(unsigned int cpu) +{ + acpi_cpei_phys_cpuid = cpu_physical_id(cpu); +} +#endif + +unsigned int get_cpei_target_cpu(void) +{ + return acpi_cpei_phys_cpuid; +} + +static int __init +acpi_parse_int_src_ovr(struct acpi_subtable_header * header, + const unsigned long end) +{ + struct acpi_madt_interrupt_override *p; + + p = (struct acpi_madt_interrupt_override *)header; + + if (BAD_MADT_ENTRY(p, end)) + return -EINVAL; + + iosapic_override_isa_irq(p->source_irq, p->global_irq, + ((p->inti_flags & ACPI_MADT_POLARITY_MASK) == + ACPI_MADT_POLARITY_ACTIVE_LOW) ? + IOSAPIC_POL_LOW : IOSAPIC_POL_HIGH, + ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) == + ACPI_MADT_TRIGGER_LEVEL) ? + IOSAPIC_LEVEL : IOSAPIC_EDGE); + return 0; +} + +static int __init +acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end) +{ + struct acpi_madt_nmi_source *nmi_src; + + nmi_src = (struct acpi_madt_nmi_source *)header; + + if (BAD_MADT_ENTRY(nmi_src, end)) + return -EINVAL; + + /* TBD: Support nimsrc entries */ + return 0; +} + +static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) { + + /* + * Unfortunately ITC_DRIFT is not yet part of the + * official SAL spec, so the ITC_DRIFT bit is not + * set by the BIOS on this hardware. + */ + sal_platform_features |= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT; + + cyclone_setup(); + } +} + +static int __init acpi_parse_madt(struct acpi_table_header *table) +{ + if (!table) + return -EINVAL; + + acpi_madt = (struct acpi_table_madt *)table; + + acpi_madt_rev = acpi_madt->header.revision; + + /* remember the value for reference after free_initmem() */ +#ifdef CONFIG_ITANIUM + has_8259 = 1; /* Firmware on old Itanium systems is broken */ +#else + has_8259 = acpi_madt->flags & ACPI_MADT_PCAT_COMPAT; +#endif + iosapic_system_init(has_8259); + + /* Get base address of IPI Message Block */ + + if (acpi_madt->address) + ipi_base_addr = ioremap(acpi_madt->address, 0); + + printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); + + acpi_madt_oem_check(acpi_madt->header.oem_id, + acpi_madt->header.oem_table_id); + + return 0; +} + +#ifdef CONFIG_ACPI_NUMA + +#undef SLIT_DEBUG + +#define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32) + +static int __initdata srat_num_cpus; /* number of cpus */ +static u32 pxm_flag[PXM_FLAG_LEN]; +#define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag)) +#define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag)) +static struct acpi_table_slit __initdata *slit_table; +cpumask_t early_cpu_possible_map = CPU_MASK_NONE; + +static int __init +get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa) +{ + int pxm; + + pxm = pa->proximity_domain_lo; + if (ia64_platform_is("sn2") || acpi_srat_revision >= 2) + pxm += pa->proximity_domain_hi[0] << 8; + return pxm; +} + +static int __init +get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma) +{ + int pxm; + + pxm = ma->proximity_domain; + if (!ia64_platform_is("sn2") && acpi_srat_revision <= 1) + pxm &= 0xff; + + return pxm; +} + +/* + * ACPI 2.0 SLIT (System Locality Information Table) + * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf + */ +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) +{ + u32 len; + + len = sizeof(struct acpi_table_header) + 8 + + slit->locality_count * slit->locality_count; + if (slit->header.length != len) { + printk(KERN_ERR + "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", + len, slit->header.length); + return; + } + slit_table = slit; +} + +void __init +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) +{ + int pxm; + + if (!(pa->flags & ACPI_SRAT_CPU_ENABLED)) + return; + + if (srat_num_cpus >= ARRAY_SIZE(node_cpuid)) { + printk_once(KERN_WARNING + "node_cpuid[%ld] is too small, may not be able to use all cpus\n", + ARRAY_SIZE(node_cpuid)); + return; + } + pxm = get_processor_proximity_domain(pa); + + /* record this node in proximity bitmap */ + pxm_bit_set(pxm); + + node_cpuid[srat_num_cpus].phys_id = + (pa->apic_id << 8) | (pa->local_sapic_eid); + /* nid should be overridden as logical node id later */ + node_cpuid[srat_num_cpus].nid = pxm; + cpu_set(srat_num_cpus, early_cpu_possible_map); + srat_num_cpus++; +} + +int __init +acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) +{ + unsigned long paddr, size; + int pxm; + struct node_memblk_s *p, *q, *pend; + + pxm = get_memory_proximity_domain(ma); + + /* fill node memory chunk structure */ + paddr = ma->base_address; + size = ma->length; + + /* Ignore disabled entries */ + if (!(ma->flags & ACPI_SRAT_MEM_ENABLED)) + return -1; + + /* record this node in proximity bitmap */ + pxm_bit_set(pxm); + + /* Insertion sort based on base address */ + pend = &node_memblk[num_node_memblks]; + for (p = &node_memblk[0]; p < pend; p++) { + if (paddr < p->start_paddr) + break; + } + if (p < pend) { + for (q = pend - 1; q >= p; q--) + *(q + 1) = *q; + } + p->start_paddr = paddr; + p->size = size; + p->nid = pxm; + num_node_memblks++; + return 0; +} + +void __init acpi_numa_arch_fixup(void) +{ + int i, j, node_from, node_to; + + /* If there's no SRAT, fix the phys_id and mark node 0 online */ + if (srat_num_cpus == 0) { + node_set_online(0); + node_cpuid[0].phys_id = hard_smp_processor_id(); + return; + } + + /* + * MCD - This can probably be dropped now. No need for pxm ID to node ID + * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES. + */ + nodes_clear(node_online_map); + for (i = 0; i < MAX_PXM_DOMAINS; i++) { + if (pxm_bit_test(i)) { + int nid = acpi_map_pxm_to_node(i); + node_set_online(nid); + } + } + + /* set logical node id in memory chunk structure */ + for (i = 0; i < num_node_memblks; i++) + node_memblk[i].nid = pxm_to_node(node_memblk[i].nid); + + /* assign memory bank numbers for each chunk on each node */ + for_each_online_node(i) { + int bank; + + bank = 0; + for (j = 0; j < num_node_memblks; j++) + if (node_memblk[j].nid == i) + node_memblk[j].bank = bank++; + } + + /* set logical node id in cpu structure */ + for_each_possible_early_cpu(i) + node_cpuid[i].nid = pxm_to_node(node_cpuid[i].nid); + + printk(KERN_INFO "Number of logical nodes in system = %d\n", + num_online_nodes()); + printk(KERN_INFO "Number of memory chunks in system = %d\n", + num_node_memblks); + + if (!slit_table) { + for (i = 0; i < MAX_NUMNODES; i++) + for (j = 0; j < MAX_NUMNODES; j++) + node_distance(i, j) = i == j ? LOCAL_DISTANCE : + REMOTE_DISTANCE; + return; + } + + memset(numa_slit, -1, sizeof(numa_slit)); + for (i = 0; i < slit_table->locality_count; i++) { + if (!pxm_bit_test(i)) + continue; + node_from = pxm_to_node(i); + for (j = 0; j < slit_table->locality_count; j++) { + if (!pxm_bit_test(j)) + continue; + node_to = pxm_to_node(j); + node_distance(node_from, node_to) = + slit_table->entry[i * slit_table->locality_count + j]; + } + } + +#ifdef SLIT_DEBUG + printk("ACPI 2.0 SLIT locality table:\n"); + for_each_online_node(i) { + for_each_online_node(j) + printk("%03d ", node_distance(i, j)); + printk("\n"); + } +#endif +} +#endif /* CONFIG_ACPI_NUMA */ + +/* + * success: return IRQ number (>=0) + * failure: return < 0 + */ +int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) +{ + if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) + return gsi; + + if (has_8259 && gsi < 16) + return isa_irq_to_vector(gsi); + + return iosapic_register_intr(gsi, + (polarity == + ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : + IOSAPIC_POL_LOW, + (triggering == + ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : + IOSAPIC_LEVEL); +} +EXPORT_SYMBOL_GPL(acpi_register_gsi); + +void acpi_unregister_gsi(u32 gsi) +{ + if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) + return; + + if (has_8259 && gsi < 16) + return; + + iosapic_unregister_intr(gsi); +} +EXPORT_SYMBOL_GPL(acpi_unregister_gsi); + +static int __init acpi_parse_fadt(struct acpi_table_header *table) +{ + struct acpi_table_header *fadt_header; + struct acpi_table_fadt *fadt; + + if (!table) + return -EINVAL; + + fadt_header = (struct acpi_table_header *)table; + if (fadt_header->revision != 3) + return -ENODEV; /* Only deal with ACPI 2.0 FADT */ + + fadt = (struct acpi_table_fadt *)fadt_header; + + acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, + ACPI_ACTIVE_LOW); + return 0; +} + +int __init early_acpi_boot_init(void) +{ + int ret; + + /* + * do a partial walk of MADT to determine how many CPUs + * we have including offline CPUs + */ + if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { + printk(KERN_ERR PREFIX "Can't find MADT\n"); + return 0; + } + + ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, + acpi_parse_lsapic, NR_CPUS); + if (ret < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no LAPIC entries\n"); + else + acpi_lapic = 1; + +#ifdef CONFIG_SMP + if (available_cpus == 0) { + printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); + printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); + smp_boot_data.cpu_phys_id[available_cpus] = + hard_smp_processor_id(); + available_cpus = 1; /* We've got at least one of these, no? */ + } + smp_boot_data.cpu_count = available_cpus; +#endif + /* Make boot-up look pretty */ + printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, + total_cpus); + + return 0; +} + +int __init acpi_boot_init(void) +{ + + /* + * MADT + * ---- + * Parse the Multiple APIC Description Table (MADT), if exists. + * Note that this table provides platform SMP configuration + * information -- the successor to MPS tables. + */ + + if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { + printk(KERN_ERR PREFIX "Can't find MADT\n"); + goto skip_madt; + } + + /* Local APIC */ + + if (acpi_table_parse_madt + (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0) + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); + + if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0) + < 0) + printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); + + /* I/O APIC */ + + if (acpi_table_parse_madt + (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) { + if (!ia64_platform_is("sn2")) + printk(KERN_ERR PREFIX + "Error parsing MADT - no IOSAPIC entries\n"); + } + + /* System-Level Interrupt Routing */ + + if (acpi_table_parse_madt + (ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src, + ACPI_MAX_PLATFORM_INTERRUPTS) < 0) + printk(KERN_ERR PREFIX + "Error parsing platform interrupt source entry\n"); + + if (acpi_table_parse_madt + (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0) + printk(KERN_ERR PREFIX + "Error parsing interrupt source overrides entry\n"); + + if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0) + printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); + skip_madt: + + /* + * FADT says whether a legacy keyboard controller is present. + * The FADT also contains an SCI_INT line, by which the system + * gets interrupts such as power and sleep buttons. If it's not + * on a Legacy interrupt, it needs to be setup. + */ + if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt)) + printk(KERN_ERR PREFIX "Can't find FADT\n"); + +#ifdef CONFIG_ACPI_NUMA +#ifdef CONFIG_SMP + if (srat_num_cpus == 0) { + int cpu, i = 1; + for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++) + if (smp_boot_data.cpu_phys_id[cpu] != + hard_smp_processor_id()) + node_cpuid[i++].phys_id = + smp_boot_data.cpu_phys_id[cpu]; + } +#endif + build_cpu_to_node_map(); +#endif + return 0; +} + +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) +{ + int tmp; + + if (has_8259 && gsi < 16) + *irq = isa_irq_to_vector(gsi); + else { + tmp = gsi_to_irq(gsi); + if (tmp == -1) + return -1; + *irq = tmp; + } + return 0; +} + +int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi) +{ + if (isa_irq >= 16) + return -1; + *gsi = isa_irq; + return 0; +} + +/* + * ACPI based hotplug CPU support + */ +#ifdef CONFIG_ACPI_HOTPLUG_CPU +static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid) +{ +#ifdef CONFIG_ACPI_NUMA + /* + * We don't have cpu-only-node hotadd. But if the system equips + * SRAT table, pxm is already found and node is ready. + * So, just pxm_to_nid(pxm) is OK. + * This code here is for the system which doesn't have full SRAT + * table for possible cpus. + */ + node_cpuid[cpu].phys_id = physid; + node_cpuid[cpu].nid = acpi_get_node(handle); +#endif + return 0; +} + +int additional_cpus __initdata = -1; + +static __init int setup_additional_cpus(char *s) +{ + if (s) + additional_cpus = simple_strtol(s, NULL, 0); + + return 0; +} + +early_param("additional_cpus", setup_additional_cpus); + +/* + * cpu_possible_mask should be static, it cannot change as CPUs + * are onlined, or offlined. The reason is per-cpu data-structures + * are allocated by some modules at init time, and dont expect to + * do this dynamically on cpu arrival/departure. + * cpu_present_mask on the other hand can change dynamically. + * In case when cpu_hotplug is not compiled, then we resort to current + * behaviour, which is cpu_possible == cpu_present. + * - Ashok Raj + * + * Three ways to find out the number of additional hotplug CPUs: + * - If the BIOS specified disabled CPUs in ACPI/mptables use that. + * - The user can overwrite it with additional_cpus=NUM + * - Otherwise don't reserve additional CPUs. + */ +__init void prefill_possible_map(void) +{ + int i; + int possible, disabled_cpus; + + disabled_cpus = total_cpus - available_cpus; + + if (additional_cpus == -1) { + if (disabled_cpus > 0) + additional_cpus = disabled_cpus; + else + additional_cpus = 0; + } + + possible = available_cpus + additional_cpus; + + if (possible > nr_cpu_ids) + possible = nr_cpu_ids; + + printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", + possible, max((possible - available_cpus), 0)); + + for (i = 0; i < possible; i++) + set_cpu_possible(i, true); +} + +static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) +{ + cpumask_t tmp_map; + int cpu; + + cpumask_complement(&tmp_map, cpu_present_mask); + cpu = cpumask_first(&tmp_map); + if (cpu >= nr_cpu_ids) + return -EINVAL; + + acpi_map_cpu2node(handle, cpu, physid); + + set_cpu_present(cpu, true); + ia64_cpu_to_sapicid[cpu] = physid; + + acpi_processor_set_pdc(handle); + + *pcpu = cpu; + return (0); +} + +/* wrapper to silence section mismatch warning */ +int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu) +{ + return _acpi_map_lsapic(handle, physid, pcpu); +} +EXPORT_SYMBOL(acpi_map_cpu); + +int acpi_unmap_cpu(int cpu) +{ + ia64_cpu_to_sapicid[cpu] = -1; + set_cpu_present(cpu, false); + +#ifdef CONFIG_ACPI_NUMA + /* NUMA specific cleanup's */ +#endif + + return (0); +} +EXPORT_SYMBOL(acpi_unmap_cpu); +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ + +#ifdef CONFIG_ACPI_NUMA +static acpi_status acpi_map_iosapic(acpi_handle handle, u32 depth, + void *context, void **ret) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + struct acpi_madt_io_sapic *iosapic; + unsigned int gsi_base; + int node; + + /* Only care about objects w/ a method that returns the MADT */ + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) + return AE_OK; + + if (!buffer.length || !buffer.pointer) + return AE_OK; + + obj = buffer.pointer; + if (obj->type != ACPI_TYPE_BUFFER || + obj->buffer.length < sizeof(*iosapic)) { + kfree(buffer.pointer); + return AE_OK; + } + + iosapic = (struct acpi_madt_io_sapic *)obj->buffer.pointer; + + if (iosapic->header.type != ACPI_MADT_TYPE_IO_SAPIC) { + kfree(buffer.pointer); + return AE_OK; + } + + gsi_base = iosapic->global_irq_base; + + kfree(buffer.pointer); + + /* OK, it's an IOSAPIC MADT entry; associate it with a node */ + node = acpi_get_node(handle); + if (node == NUMA_NO_NODE || !node_online(node) || + cpumask_empty(cpumask_of_node(node))) + return AE_OK; + + /* We know a gsi to node mapping! */ + map_iosapic_to_node(gsi_base, node); + return AE_OK; +} + +static int __init +acpi_map_iosapics (void) +{ + acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL); + return 0; +} + +fs_initcall(acpi_map_iosapics); +#endif /* CONFIG_ACPI_NUMA */ + +int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) +{ + int err; + + if ((err = iosapic_init(phys_addr, gsi_base))) + return err; + +#ifdef CONFIG_ACPI_NUMA + acpi_map_iosapic(handle, 0, NULL, NULL); +#endif /* CONFIG_ACPI_NUMA */ + + return 0; +} + +EXPORT_SYMBOL(acpi_register_ioapic); + +int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) +{ + return iosapic_remove(gsi_base); +} + +EXPORT_SYMBOL(acpi_unregister_ioapic); + +/* + * acpi_suspend_lowlevel() - save kernel state and suspend. + * + * TBD when when IA64 starts to support suspend... + */ +int acpi_suspend_lowlevel(void) { return 0; }

From: Al Stone ahs3@redhat.com

In preparation for adding some additional arch-dependent ACPI files, move the existing ones to a directory to try to keep clutter down in the arch/arm64/kernel directory.

There is no functional change. This patch only moves source files.

Signed-off-by: Al Stone al.stone@linaro.org --- arch/arm64/kernel/Makefile | 2 +- arch/arm64/kernel/acpi.c | 359 ---------------------------------------- arch/arm64/kernel/acpi/Makefile | 1 + arch/arm64/kernel/acpi/acpi.c | 359 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 361 insertions(+), 360 deletions(-) delete mode 100644 arch/arm64/kernel/acpi.c create mode 100644 arch/arm64/kernel/acpi/Makefile create mode 100644 arch/arm64/kernel/acpi/acpi.c

diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 8bdc6bd..d7d622f 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -34,7 +34,7 @@ arm64-obj-$(CONFIG_KGDB) += kgdb.o arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o arm64-obj-$(CONFIG_PCI) += pci.o arm64-obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o -arm64-obj-$(CONFIG_ACPI) += acpi.o +arm64-obj-$(CONFIG_ACPI) += acpi/

obj-y += $(arm64-obj-y) vdso/ obj-m += $(arm64-obj-m) diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c deleted file mode 100644 index ea3c9fc..0000000 --- a/arch/arm64/kernel/acpi.c +++ /dev/null @@ -1,359 +0,0 @@ -/* - * ARM64 Specific Low-Level ACPI Boot Support - * - * Copyright (C) 2013-2014, Linaro Ltd. - * Author: Al Stone al.stone@linaro.org - * Author: Graeme Gregory graeme.gregory@linaro.org - * Author: Hanjun Guo hanjun.guo@linaro.org - * Author: Tomasz Nowicki tomasz.nowicki@linaro.org - * Author: Naresh Bhat naresh.bhat@linaro.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ACPI: " fmt - -#include <linux/init.h> -#include <linux/acpi.h> -#include <linux/cpumask.h> -#include <linux/memblock.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/bootmem.h> -#include <linux/smp.h> -#include <linux/irqchip/arm-gic-acpi.h> - -#include <asm/cputype.h> -#include <asm/cpu_ops.h> - -int acpi_noirq; /* skip ACPI IRQ initialization */ -int acpi_disabled; -EXPORT_SYMBOL(acpi_disabled); - -int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */ -EXPORT_SYMBOL(acpi_pci_disabled); - -static int enabled_cpus; /* Processors (GICC) with enabled flag in MADT */ - -/* - * Since we're on ARM, the default interrupt routing model - * clearly has to be GIC. - */ -enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC; - -/* - * __acpi_map_table() will be called before page_init(), so early_ioremap() - * or early_memremap() should be called here to for ACPI table mapping. - */ -char *__init __acpi_map_table(unsigned long phys, unsigned long size) -{ - if (!phys || !size) - return NULL; - - return early_memremap(phys, size); -} - -void __init __acpi_unmap_table(char *map, unsigned long size) -{ - if (!map || !size) - return; - - early_memunmap(map, size); -} - -/** - * acpi_map_gic_cpu_interface - generates a logical cpu number - * and map to MPIDR represented by GICC structure - * @mpidr: CPU's hardware id to register, MPIDR represented in MADT - * @enabled: this cpu is enabled or not - * - * Returns the logical cpu number which maps to MPIDR - */ -static int acpi_map_gic_cpu_interface(u64 mpidr, u8 enabled) -{ - int cpu; - - if (mpidr == INVALID_HWID) { - pr_info("Skip MADT cpu entry with invalid MPIDR\n"); - return -EINVAL; - } - - total_cpus++; - if (!enabled) - return -EINVAL; - - if (enabled_cpus >= NR_CPUS) { - pr_warn("NR_CPUS limit of %d reached, Processor %d/0x%llx ignored.\n", - NR_CPUS, total_cpus, mpidr); - return -EINVAL; - } - - /* No need to check duplicate MPIDRs for the first CPU */ - if (enabled_cpus) { - /* - * Duplicate MPIDRs are a recipe for disaster. Scan - * all initialized entries and check for - * duplicates. If any is found just ignore the CPU. - */ - for_each_possible_cpu(cpu) { - if (cpu_logical_map(cpu) == mpidr) { - pr_err("Firmware bug, duplicate CPU MPIDR: 0x%llx in MADT\n", - mpidr); - return -EINVAL; - } - } - - /* allocate a logical cpu id for the new comer */ - cpu = cpumask_next_zero(-1, cpu_possible_mask); - } else { - /* - * First GICC entry must be BSP as ACPI spec said - * in section 5.2.12.15 - */ - if (cpu_logical_map(0) != mpidr) { - pr_err("First GICC entry with MPIDR 0x%llx is not BSP\n", - mpidr); - return -EINVAL; - } - - /* - * boot_cpu_init() already hold bit 0 in cpu_present_mask - * for BSP, no need to allocate again. - */ - cpu = 0; - } - - /* CPU 0 was already initialized */ - if (cpu) { - cpu_ops[cpu] = cpu_get_ops(acpi_psci_present() ? "psci" : NULL); - if (!cpu_ops[cpu]) - return -EINVAL; - - if (cpu_ops[cpu]->cpu_init(NULL, cpu)) - return -EOPNOTSUPP; - - /* map the logical cpu id to cpu MPIDR */ - cpu_logical_map(cpu) = mpidr; - - set_cpu_possible(cpu, true); - } else { - /* get cpu0's ops, no need to return if ops is null */ - cpu_ops[0] = cpu_get_ops(acpi_psci_present() ? "psci" : NULL); - } - - enabled_cpus++; - return cpu; -} - -static int __init -acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header, - const unsigned long end) -{ - struct acpi_madt_generic_interrupt *processor; - - processor = (struct acpi_madt_generic_interrupt *)header; - - if (BAD_MADT_ENTRY(processor, end)) - return -EINVAL; - - acpi_table_print_madt_entry(header); - - acpi_map_gic_cpu_interface(processor->arm_mpidr & MPIDR_HWID_BITMASK, - processor->flags & ACPI_MADT_ENABLED); - - return 0; -} - -/* Parse GIC cpu interface entries in MADT for SMP init */ -void __init acpi_smp_init_cpus(void) -{ - int count; - - /* - * do a partial walk of MADT to determine how many CPUs - * we have including disabled CPUs, and get information - * we need for SMP init - */ - count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT, - acpi_parse_gic_cpu_interface, 0); - - if (!count) { - pr_err("No GIC CPU interface entries present\n"); - return; - } else if (count < 0) { - pr_err("Error parsing GIC CPU interface entry\n"); - return; - } - - /* Make boot-up look pretty */ - pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus); -} - -int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) -{ - *irq = irq_find_mapping(NULL, gsi); - - return 0; -} -EXPORT_SYMBOL_GPL(acpi_gsi_to_irq); - -/* - * success: return IRQ number (>0) - * failure: return =< 0 - */ -int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) -{ - unsigned int irq; - unsigned int irq_type; - - /* - * ACPI have no bindings to indicate SPI or PPI, so we - * use different mappings from DT in ACPI. - * - * For FDT - * PPI interrupt: in the range [0, 15]; - * SPI interrupt: in the range [0, 987]; - * - * For ACPI, GSI should be unique so using - * the hwirq directly for the mapping: - * PPI interrupt: in the range [16, 31]; - * SPI interrupt: in the range [32, 1019]; - */ - - if (trigger == ACPI_EDGE_SENSITIVE && - polarity == ACPI_ACTIVE_LOW) - irq_type = IRQ_TYPE_EDGE_FALLING; - else if (trigger == ACPI_EDGE_SENSITIVE && - polarity == ACPI_ACTIVE_HIGH) - irq_type = IRQ_TYPE_EDGE_RISING; - else if (trigger == ACPI_LEVEL_SENSITIVE && - polarity == ACPI_ACTIVE_LOW) - irq_type = IRQ_TYPE_LEVEL_LOW; - else if (trigger == ACPI_LEVEL_SENSITIVE && - polarity == ACPI_ACTIVE_HIGH) - irq_type = IRQ_TYPE_LEVEL_HIGH; - else - irq_type = IRQ_TYPE_NONE; - - /* - * Since only one GIC is supported in ACPI 5.0, we can - * create mapping refer to the default domain - */ - irq = irq_create_mapping(NULL, gsi); - if (!irq) - return irq; - - /* Set irq type if specified and different than the current one */ - if (irq_type != IRQ_TYPE_NONE && - irq_type != irq_get_trigger_type(irq)) - irq_set_irq_type(irq, irq_type); - return irq; -} -EXPORT_SYMBOL_GPL(acpi_register_gsi); - -void acpi_unregister_gsi(u32 gsi) -{ -} -EXPORT_SYMBOL_GPL(acpi_unregister_gsi); - -static int __init acpi_parse_fadt(struct acpi_table_header *table) -{ - struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table; - - /* - * Revision in table header is the FADT Major revision, - * and there is a minor revision of FADT which was introduced - * by ACPI 5.1, we only deal with ACPI 5.1 or newer revision - * to get arm boot flags, or we will disable ACPI. - */ - if (table->revision > 5 || - (table->revision == 5 && fadt->minor_revision >= 1)) { - /* - * ACPI 5.1 only has two explicit methods to boot up SMP, - * PSCI and Parking protocol, but the Parking protocol is - * only specified for ARMv7 now, so make PSCI as the only - * way for the SMP boot protocol before some updates for - * the ACPI spec or the Parking protocol spec. - */ - if (acpi_psci_present()) - return 0; - - pr_warn("No PSCI support, will not bring up secondary CPUs\n"); - return -EOPNOTSUPP; - } - - pr_warn("Unsupported FADT revision %d.%d, should be 5.1+, will disable ACPI\n", - table->revision, fadt->minor_revision); - disable_acpi(); - - return -EINVAL; -} - -/* - * acpi_boot_table_init() called from setup_arch(), always. - * 1. find RSDP and get its address, and then find XSDT - * 2. extract all tables and checksums them all - * 3. check ACPI FADT revision - * - * We can parse ACPI boot-time tables such as MADT after - * this function is called. - */ -void __init acpi_boot_table_init(void) -{ - /* If acpi_disabled, bail out */ - if (acpi_disabled) - return; - - /* Initialize the ACPI boot-time table parser. */ - if (acpi_table_init()) { - disable_acpi(); - return; - } - - if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt)) - pr_err("Can't find FADT or error happened during parsing FADT\n"); -} - -void __init acpi_gic_init(void) -{ - struct acpi_table_header *table; - acpi_status status; - acpi_size tbl_size; - int err; - - if (acpi_disabled) - return; - - status = acpi_get_table_with_size(ACPI_SIG_MADT, 0, &table, &tbl_size); - if (ACPI_FAILURE(status)) { - const char *msg = acpi_format_exception(status); - - pr_err("Failed to get MADT table, %s\n", msg); - return; - } - - err = gic_v2_acpi_init(table); - if (err) - pr_err("Failed to initialize GIC IRQ controller"); - - early_acpi_os_unmap_memory((char *)table, tbl_size); -} - -static int __init parse_acpi(char *arg) -{ - if (!arg) - return -EINVAL; - - /* "acpi=off" disables both ACPI table parsing and interpreter */ - if (strcmp(arg, "off") == 0) - disable_acpi(); - else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */ - enable_acpi(); - else - return -EINVAL; /* Core will print when we return error */ - - return 0; -} -early_param("acpi", parse_acpi); diff --git a/arch/arm64/kernel/acpi/Makefile b/arch/arm64/kernel/acpi/Makefile new file mode 100644 index 0000000..e049f94 --- /dev/null +++ b/arch/arm64/kernel/acpi/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ACPI) += acpi.o diff --git a/arch/arm64/kernel/acpi/acpi.c b/arch/arm64/kernel/acpi/acpi.c new file mode 100644 index 0000000..ea3c9fc --- /dev/null +++ b/arch/arm64/kernel/acpi/acpi.c @@ -0,0 +1,359 @@ +/* + * ARM64 Specific Low-Level ACPI Boot Support + * + * Copyright (C) 2013-2014, Linaro Ltd. + * Author: Al Stone al.stone@linaro.org + * Author: Graeme Gregory graeme.gregory@linaro.org + * Author: Hanjun Guo hanjun.guo@linaro.org + * Author: Tomasz Nowicki tomasz.nowicki@linaro.org + * Author: Naresh Bhat naresh.bhat@linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) "ACPI: " fmt + +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/cpumask.h> +#include <linux/memblock.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/bootmem.h> +#include <linux/smp.h> +#include <linux/irqchip/arm-gic-acpi.h> + +#include <asm/cputype.h> +#include <asm/cpu_ops.h> + +int acpi_noirq; /* skip ACPI IRQ initialization */ +int acpi_disabled; +EXPORT_SYMBOL(acpi_disabled); + +int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */ +EXPORT_SYMBOL(acpi_pci_disabled); + +static int enabled_cpus; /* Processors (GICC) with enabled flag in MADT */ + +/* + * Since we're on ARM, the default interrupt routing model + * clearly has to be GIC. + */ +enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC; + +/* + * __acpi_map_table() will be called before page_init(), so early_ioremap() + * or early_memremap() should be called here to for ACPI table mapping. + */ +char *__init __acpi_map_table(unsigned long phys, unsigned long size) +{ + if (!phys || !size) + return NULL; + + return early_memremap(phys, size); +} + +void __init __acpi_unmap_table(char *map, unsigned long size) +{ + if (!map || !size) + return; + + early_memunmap(map, size); +} + +/** + * acpi_map_gic_cpu_interface - generates a logical cpu number + * and map to MPIDR represented by GICC structure + * @mpidr: CPU's hardware id to register, MPIDR represented in MADT + * @enabled: this cpu is enabled or not + * + * Returns the logical cpu number which maps to MPIDR + */ +static int acpi_map_gic_cpu_interface(u64 mpidr, u8 enabled) +{ + int cpu; + + if (mpidr == INVALID_HWID) { + pr_info("Skip MADT cpu entry with invalid MPIDR\n"); + return -EINVAL; + } + + total_cpus++; + if (!enabled) + return -EINVAL; + + if (enabled_cpus >= NR_CPUS) { + pr_warn("NR_CPUS limit of %d reached, Processor %d/0x%llx ignored.\n", + NR_CPUS, total_cpus, mpidr); + return -EINVAL; + } + + /* No need to check duplicate MPIDRs for the first CPU */ + if (enabled_cpus) { + /* + * Duplicate MPIDRs are a recipe for disaster. Scan + * all initialized entries and check for + * duplicates. If any is found just ignore the CPU. + */ + for_each_possible_cpu(cpu) { + if (cpu_logical_map(cpu) == mpidr) { + pr_err("Firmware bug, duplicate CPU MPIDR: 0x%llx in MADT\n", + mpidr); + return -EINVAL; + } + } + + /* allocate a logical cpu id for the new comer */ + cpu = cpumask_next_zero(-1, cpu_possible_mask); + } else { + /* + * First GICC entry must be BSP as ACPI spec said + * in section 5.2.12.15 + */ + if (cpu_logical_map(0) != mpidr) { + pr_err("First GICC entry with MPIDR 0x%llx is not BSP\n", + mpidr); + return -EINVAL; + } + + /* + * boot_cpu_init() already hold bit 0 in cpu_present_mask + * for BSP, no need to allocate again. + */ + cpu = 0; + } + + /* CPU 0 was already initialized */ + if (cpu) { + cpu_ops[cpu] = cpu_get_ops(acpi_psci_present() ? "psci" : NULL); + if (!cpu_ops[cpu]) + return -EINVAL; + + if (cpu_ops[cpu]->cpu_init(NULL, cpu)) + return -EOPNOTSUPP; + + /* map the logical cpu id to cpu MPIDR */ + cpu_logical_map(cpu) = mpidr; + + set_cpu_possible(cpu, true); + } else { + /* get cpu0's ops, no need to return if ops is null */ + cpu_ops[0] = cpu_get_ops(acpi_psci_present() ? "psci" : NULL); + } + + enabled_cpus++; + return cpu; +} + +static int __init +acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header, + const unsigned long end) +{ + struct acpi_madt_generic_interrupt *processor; + + processor = (struct acpi_madt_generic_interrupt *)header; + + if (BAD_MADT_ENTRY(processor, end)) + return -EINVAL; + + acpi_table_print_madt_entry(header); + + acpi_map_gic_cpu_interface(processor->arm_mpidr & MPIDR_HWID_BITMASK, + processor->flags & ACPI_MADT_ENABLED); + + return 0; +} + +/* Parse GIC cpu interface entries in MADT for SMP init */ +void __init acpi_smp_init_cpus(void) +{ + int count; + + /* + * do a partial walk of MADT to determine how many CPUs + * we have including disabled CPUs, and get information + * we need for SMP init + */ + count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT, + acpi_parse_gic_cpu_interface, 0); + + if (!count) { + pr_err("No GIC CPU interface entries present\n"); + return; + } else if (count < 0) { + pr_err("Error parsing GIC CPU interface entry\n"); + return; + } + + /* Make boot-up look pretty */ + pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus); +} + +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) +{ + *irq = irq_find_mapping(NULL, gsi); + + return 0; +} +EXPORT_SYMBOL_GPL(acpi_gsi_to_irq); + +/* + * success: return IRQ number (>0) + * failure: return =< 0 + */ +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) +{ + unsigned int irq; + unsigned int irq_type; + + /* + * ACPI have no bindings to indicate SPI or PPI, so we + * use different mappings from DT in ACPI. + * + * For FDT + * PPI interrupt: in the range [0, 15]; + * SPI interrupt: in the range [0, 987]; + * + * For ACPI, GSI should be unique so using + * the hwirq directly for the mapping: + * PPI interrupt: in the range [16, 31]; + * SPI interrupt: in the range [32, 1019]; + */ + + if (trigger == ACPI_EDGE_SENSITIVE && + polarity == ACPI_ACTIVE_LOW) + irq_type = IRQ_TYPE_EDGE_FALLING; + else if (trigger == ACPI_EDGE_SENSITIVE && + polarity == ACPI_ACTIVE_HIGH) + irq_type = IRQ_TYPE_EDGE_RISING; + else if (trigger == ACPI_LEVEL_SENSITIVE && + polarity == ACPI_ACTIVE_LOW) + irq_type = IRQ_TYPE_LEVEL_LOW; + else if (trigger == ACPI_LEVEL_SENSITIVE && + polarity == ACPI_ACTIVE_HIGH) + irq_type = IRQ_TYPE_LEVEL_HIGH; + else + irq_type = IRQ_TYPE_NONE; + + /* + * Since only one GIC is supported in ACPI 5.0, we can + * create mapping refer to the default domain + */ + irq = irq_create_mapping(NULL, gsi); + if (!irq) + return irq; + + /* Set irq type if specified and different than the current one */ + if (irq_type != IRQ_TYPE_NONE && + irq_type != irq_get_trigger_type(irq)) + irq_set_irq_type(irq, irq_type); + return irq; +} +EXPORT_SYMBOL_GPL(acpi_register_gsi); + +void acpi_unregister_gsi(u32 gsi) +{ +} +EXPORT_SYMBOL_GPL(acpi_unregister_gsi); + +static int __init acpi_parse_fadt(struct acpi_table_header *table) +{ + struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table; + + /* + * Revision in table header is the FADT Major revision, + * and there is a minor revision of FADT which was introduced + * by ACPI 5.1, we only deal with ACPI 5.1 or newer revision + * to get arm boot flags, or we will disable ACPI. + */ + if (table->revision > 5 || + (table->revision == 5 && fadt->minor_revision >= 1)) { + /* + * ACPI 5.1 only has two explicit methods to boot up SMP, + * PSCI and Parking protocol, but the Parking protocol is + * only specified for ARMv7 now, so make PSCI as the only + * way for the SMP boot protocol before some updates for + * the ACPI spec or the Parking protocol spec. + */ + if (acpi_psci_present()) + return 0; + + pr_warn("No PSCI support, will not bring up secondary CPUs\n"); + return -EOPNOTSUPP; + } + + pr_warn("Unsupported FADT revision %d.%d, should be 5.1+, will disable ACPI\n", + table->revision, fadt->minor_revision); + disable_acpi(); + + return -EINVAL; +} + +/* + * acpi_boot_table_init() called from setup_arch(), always. + * 1. find RSDP and get its address, and then find XSDT + * 2. extract all tables and checksums them all + * 3. check ACPI FADT revision + * + * We can parse ACPI boot-time tables such as MADT after + * this function is called. + */ +void __init acpi_boot_table_init(void) +{ + /* If acpi_disabled, bail out */ + if (acpi_disabled) + return; + + /* Initialize the ACPI boot-time table parser. */ + if (acpi_table_init()) { + disable_acpi(); + return; + } + + if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt)) + pr_err("Can't find FADT or error happened during parsing FADT\n"); +} + +void __init acpi_gic_init(void) +{ + struct acpi_table_header *table; + acpi_status status; + acpi_size tbl_size; + int err; + + if (acpi_disabled) + return; + + status = acpi_get_table_with_size(ACPI_SIG_MADT, 0, &table, &tbl_size); + if (ACPI_FAILURE(status)) { + const char *msg = acpi_format_exception(status); + + pr_err("Failed to get MADT table, %s\n", msg); + return; + } + + err = gic_v2_acpi_init(table); + if (err) + pr_err("Failed to initialize GIC IRQ controller"); + + early_acpi_os_unmap_memory((char *)table, tbl_size); +} + +static int __init parse_acpi(char *arg) +{ + if (!arg) + return -EINVAL; + + /* "acpi=off" disables both ACPI table parsing and interpreter */ + if (strcmp(arg, "off") == 0) + disable_acpi(); + else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */ + enable_acpi(); + else + return -EINVAL; /* Core will print when we return error */ + + return 0; +} +early_param("acpi", parse_acpi);

From: Al Stone ahs3@redhat.com

In order to deprecate the use of _OSI for arm64 or other new architectures, we need to make the default handler something we can change for various platforms. This patch moves the definition of acpi_osi_handler() -- the function used by ACPICA as a callback for evaluating _OSI -- into arch- dependent ACPI files. The declaration of acpi_os_handler() was moved in a previous patch.

No functional change for ia64.

Signed-off-by: Al Stone al.stone@linaro.org --- arch/ia64/kernel/acpi/Makefile | 2 +- arch/ia64/kernel/acpi/osi.c | 119 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 120 insertions(+), 1 deletion(-) create mode 100644 arch/ia64/kernel/acpi/osi.c

diff --git a/arch/ia64/kernel/acpi/Makefile b/arch/ia64/kernel/acpi/Makefile index 8c12745..475b530 100644 --- a/arch/ia64/kernel/acpi/Makefile +++ b/arch/ia64/kernel/acpi/Makefile @@ -1 +1 @@ -obj-$(CONFIG_ACPI) += acpi.o acpi-ext.o +obj-$(CONFIG_ACPI) += acpi.o acpi-ext.o osi.o diff --git a/arch/ia64/kernel/acpi/osi.c b/arch/ia64/kernel/acpi/osi.c new file mode 100644 index 0000000..80dbc8a --- /dev/null +++ b/arch/ia64/kernel/acpi/osi.c @@ -0,0 +1,119 @@ +/* + * osi.c - _OSI implementation (moved from drivers/acpi/osl.c) + * + * Copyright (C) 2000 Andrew Henroid + * Copyright (C) 2001, 2002 Andy Grover andrew.grover@intel.com + * Copyright (C) 2001, 2002 Paul Diefenbaugh paul.s.diefenbaugh@intel.com + * Copyright (c) 2008 Intel Corporation + * Author: Matthew Wilcox willy@linux.intel.com + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/highmem.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/kmod.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/nmi.h> +#include <linux/acpi.h> +#include <linux/efi.h> +#include <linux/ioport.h> +#include <linux/list.h> +#include <linux/jiffies.h> +#include <linux/semaphore.h> + +#include <asm/io.h> +#include <asm/uaccess.h> + +#include "internal.h" + +#define _COMPONENT ACPI_OS_SERVICES +ACPI_MODULE_NAME("osl"); + +/* + * The story of _OSI(Linux) + * + * From pre-history through Linux-2.6.22, + * Linux responded TRUE upon a BIOS OSI(Linux) query. + * + * Unfortunately, reference BIOS writers got wind of this + * and put OSI(Linux) in their example code, quickly exposing + * this string as ill-conceived and opening the door to + * an un-bounded number of BIOS incompatibilities. + * + * For example, OSI(Linux) was used on resume to re-POST a + * video card on one system, because Linux at that time + * could not do a speedy restore in its native driver. + * But then upon gaining quick native restore capability, + * Linux has no way to tell the BIOS to skip the time-consuming + * POST -- putting Linux at a permanent performance disadvantage. + * On another system, the BIOS writer used OSI(Linux) + * to infer native OS support for IPMI! On other systems, + * OSI(Linux) simply got in the way of Linux claiming to + * be compatible with other operating systems, exposing + * BIOS issues such as skipped device initialization. + * + * So "Linux" turned out to be a really poor chose of + * OSI string, and from Linux-2.6.23 onward we respond FALSE. + * + * BIOS writers should NOT query _OSI(Linux) on future systems. + * Linux will complain on the console when it sees it, and return FALSE. + * To get Linux to return TRUE for your system will require + * a kernel source update to add a DMI entry, + * or boot with "acpi_osi=Linux" + */ + +static struct osi_linux { + unsigned int enable:1; + unsigned int dmi:1; + unsigned int cmdline:1; + unsigned int default_disabling:1; +} osi_linux = {0, 0, 0, 0}; + +u32 acpi_osi_handler(acpi_string interface, u32 supported) +{ + if (!strcmp("Linux", interface)) { + + printk_once(KERN_NOTICE FW_BUG PREFIX + "BIOS _OSI(Linux) query %s%s\n", + osi_linux.enable ? "honored" : "ignored", + osi_linux.cmdline ? " via cmdline" : + osi_linux.dmi ? " via DMI" : ""); + } + + if (!strcmp("Darwin", interface)) { + /* + * Apple firmware will behave poorly if it receives positive + * answers to "Darwin" and any other OS. Respond positively + * to Darwin and then disable all other vendor strings. + */ + acpi_update_interfaces(ACPI_DISABLE_ALL_VENDOR_STRINGS); + supported = ACPI_UINT32_MAX; + } + + return supported; +} +

From: Al Stone ahs3@redhat.com

Having moved the _OSI callback function needed by ACPICA from drivers/acpi to arch-dependent locations, we now move all the remaining _OSI support functions to arch-dependent files.

This patch is much larger than I had wanted it to be; several of the functions that implemented acpi_osi* command line options, or did the set up of the interfaces to be provided by _OSI, shared a static struct. Hence, I ended up moving a bunch of code at once rather than perhaps a function at a time.

Further, ACPI blacklisting for x86 (the only architecture using it) used some of the same _OSI functions. So, it got moved to x86-specific locations as well.

For x86, there should be no functional change; only the code locations have really changed.

Even though this patch primarily changes x86-specific files, doing so has the effect of changing functionality for other architectures that can use ACPI.

For ia64, there is no more checking of the blacklist; it wasn't used in the past, however, so its just removing a useless function call. All other functionality should be unchanged.

For arm64, any use of _OSI will issue a warning that it is deprecated. All use of _OSI will return false -- i.e., it will return no useful information to any firmware using it. The ability to temporarily turn on _OSI, or turn off _OSI, or affect it in other ways from the command line is no longer available for arm64, either.

Signed-off-by: Al Stone al.stone@linaro.org --- arch/x86/kernel/acpi/Makefile | 2 +- arch/x86/kernel/acpi/blacklist.c | 327 +++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/acpi/boot.c | 5 +- arch/x86/kernel/acpi/osi.c | 157 ++++++++++++++++++- drivers/acpi/Makefile | 1 - drivers/acpi/blacklist.c | 323 -------------------------------------- drivers/acpi/osl.c | 193 ----------------------- include/linux/acpi.h | 3 - 8 files changed, 488 insertions(+), 523 deletions(-) create mode 100644 arch/x86/kernel/acpi/blacklist.c delete mode 100644 drivers/acpi/blacklist.c

diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile index e1359c9..11000b7 100644 --- a/arch/x86/kernel/acpi/Makefile +++ b/arch/x86/kernel/acpi/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_ACPI) += boot.o osi.o +obj-$(CONFIG_ACPI) += boot.o osi.o blacklist.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_$(BITS).o obj-$(CONFIG_ACPI_APEI) += apei.o

diff --git a/arch/x86/kernel/acpi/blacklist.c b/arch/x86/kernel/acpi/blacklist.c new file mode 100644 index 0000000..ecc04b3 --- /dev/null +++ b/arch/x86/kernel/acpi/blacklist.c @@ -0,0 +1,327 @@ +/* + * blacklist.c + * + * Check to see if the given machine has a known bad ACPI BIOS + * or if the BIOS is too old. + * Check given machine against acpi_osi_dmi_table[]. + * + * Copyright (C) 2004 Len Brown len.brown@intel.com + * Copyright (C) 2002 Andy Grover andrew.grover@intel.com + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/dmi.h> + +extern void __init acpi_dmi_osi_linux(int enable, + const struct dmi_system_id *d); +extern void __init acpi_osi_setup(char *str); + +#define PREFIX "ACPI: " + +enum acpi_blacklist_predicates { + all_versions, + less_than_or_equal, + equal, + greater_than_or_equal, +}; + +struct acpi_blacklist_item { + char oem_id[7]; + char oem_table_id[9]; + u32 oem_revision; + char *table; + enum acpi_blacklist_predicates oem_revision_predicate; + char *reason; + u32 is_critical_error; +}; + +static struct dmi_system_id acpi_osi_dmi_table[] __initdata; + +/* + * POLICY: If *anything* doesn't work, put it on the blacklist. + * If they are critical errors, mark it critical, and abort driver load. + */ +static struct acpi_blacklist_item acpi_blacklist[] __initdata = { + /* Compaq Presario 1700 */ + {"PTLTD ", " DSDT ", 0x06040000, ACPI_SIG_DSDT, less_than_or_equal, + "Multiple problems", 1}, + /* Sony FX120, FX140, FX150? */ + {"SONY ", "U0 ", 0x20010313, ACPI_SIG_DSDT, less_than_or_equal, + "ACPI driver problem", 1}, + /* Compaq Presario 800, Insyde BIOS */ + {"INT440", "SYSFexxx", 0x00001001, ACPI_SIG_DSDT, less_than_or_equal, + "Does not use _REG to protect EC OpRegions", 1}, + /* IBM 600E - _ADR should return 7, but it returns 1 */ + {"IBM ", "TP600E ", 0x00000105, ACPI_SIG_DSDT, less_than_or_equal, + "Incorrect _ADR", 1}, + + {""} +}; + +int __init acpi_blacklisted(void) +{ + int i = 0; + int blacklisted = 0; + struct acpi_table_header table_header; + + while (acpi_blacklist[i].oem_id[0] != '\0') { + if (acpi_get_table_header(acpi_blacklist[i].table, 0, &table_header)) { + i++; + continue; + } + + if (strncmp(acpi_blacklist[i].oem_id, table_header.oem_id, 6)) { + i++; + continue; + } + + if (strncmp + (acpi_blacklist[i].oem_table_id, table_header.oem_table_id, + 8)) { + i++; + continue; + } + + if ((acpi_blacklist[i].oem_revision_predicate == all_versions) + || (acpi_blacklist[i].oem_revision_predicate == + less_than_or_equal + && table_header.oem_revision <= + acpi_blacklist[i].oem_revision) + || (acpi_blacklist[i].oem_revision_predicate == + greater_than_or_equal + && table_header.oem_revision >= + acpi_blacklist[i].oem_revision) + || (acpi_blacklist[i].oem_revision_predicate == equal + && table_header.oem_revision == + acpi_blacklist[i].oem_revision)) { + + printk(KERN_ERR PREFIX + "Vendor "%6.6s" System "%8.8s" " + "Revision 0x%x has a known ACPI BIOS problem.\n", + acpi_blacklist[i].oem_id, + acpi_blacklist[i].oem_table_id, + acpi_blacklist[i].oem_revision); + + printk(KERN_ERR PREFIX + "Reason: %s. This is a %s error\n", + acpi_blacklist[i].reason, + (acpi_blacklist[i]. + is_critical_error ? "non-recoverable" : + "recoverable")); + + blacklisted = acpi_blacklist[i].is_critical_error; + break; + } else { + i++; + } + } + + dmi_check_system(acpi_osi_dmi_table); + + return blacklisted; +} +#ifdef CONFIG_DMI +static int __init dmi_enable_osi_linux(const struct dmi_system_id *d) +{ + acpi_dmi_osi_linux(1, d); /* enable */ + return 0; +} +static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); + acpi_osi_setup("!Windows 2006"); + acpi_osi_setup("!Windows 2006 SP1"); + acpi_osi_setup("!Windows 2006 SP2"); + return 0; +} +static int __init dmi_disable_osi_win7(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); + acpi_osi_setup("!Windows 2009"); + return 0; +} +static int __init dmi_disable_osi_win8(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); + acpi_osi_setup("!Windows 2012"); + return 0; +} + +static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { + { + .callback = dmi_disable_osi_vista, + .ident = "Fujitsu Siemens", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), + }, + }, + { + /* + * There have a NVIF method in MSI GX723 DSDT need call by Nvidia + * driver (e.g. nouveau) when user press brightness hotkey. + * Currently, nouveau driver didn't do the job and it causes there + * have a infinite while loop in DSDT when user press hotkey. + * We add MSI GX723's dmi information to this table for workaround + * this issue. + * Will remove MSI GX723 from the table after nouveau grows support. + */ + .callback = dmi_disable_osi_vista, + .ident = "MSI GX723", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + DMI_MATCH(DMI_PRODUCT_NAME, "GX723"), + }, + }, + { + .callback = dmi_disable_osi_vista, + .ident = "Sony VGN-NS10J_S", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS10J_S"), + }, + }, + { + .callback = dmi_disable_osi_vista, + .ident = "Sony VGN-SR290J", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR290J"), + }, + }, + { + .callback = dmi_disable_osi_vista, + .ident = "VGN-NS50B_L", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS50B_L"), + }, + }, + { + .callback = dmi_disable_osi_vista, + .ident = "Toshiba Satellite L355", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Satellite L355"), + }, + }, + { + .callback = dmi_disable_osi_win7, + .ident = "ASUS K50IJ", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "K50IJ"), + }, + }, + { + .callback = dmi_disable_osi_vista, + .ident = "Toshiba P305D", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P305D"), + }, + }, + { + .callback = dmi_disable_osi_vista, + .ident = "Toshiba NB100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "NB100"), + }, + }, + + /* + * The wireless hotkey does not work on those machines when + * returning true for _OSI("Windows 2012") + */ + { + .callback = dmi_disable_osi_win8, + .ident = "Dell Inspiron 7737", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7737"), + }, + }, + { + .callback = dmi_disable_osi_win8, + .ident = "Dell Inspiron 7537", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7537"), + }, + }, + { + .callback = dmi_disable_osi_win8, + .ident = "Dell Inspiron 5437", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5437"), + }, + }, + { + .callback = dmi_disable_osi_win8, + .ident = "Dell Inspiron 3437", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 3437"), + }, + }, + { + .callback = dmi_disable_osi_win8, + .ident = "Dell Vostro 3446", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3446"), + }, + }, + { + .callback = dmi_disable_osi_win8, + .ident = "Dell Vostro 3546", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3546"), + }, + }, + + /* + * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. + * Linux ignores it, except for the machines enumerated below. + */ + + /* + * Without this this EEEpc exports a non working WMI interface, with + * this it exports a working "good old" eeepc_laptop interface, fixing + * both brightness control, and rfkill not working. + */ + { + .callback = dmi_enable_osi_linux, + .ident = "Asus EEE PC 1015PX", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "1015PX"), + }, + }, + {} +}; + +#endif /* CONFIG_DMI */ diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index d162636..4773f55 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -47,6 +47,9 @@ #include <asm/i8259.h>

#include "sleep.h" /* To include x86_acpi_suspend_lowlevel */ + +extern int __init acpi_blacklisted(void); + static int __initdata acpi_force = 0; int acpi_disabled; EXPORT_SYMBOL(acpi_disabled); @@ -1502,7 +1505,7 @@ void __init acpi_boot_table_init(void) * If acpi_disabled, bail out */ if (acpi_disabled) - return; + return;

/* * Initialize the ACPI boot-time table parser. diff --git a/arch/x86/kernel/acpi/osi.c b/arch/x86/kernel/acpi/osi.c index fff2b0c..761c29e 100644 --- a/arch/x86/kernel/acpi/osi.c +++ b/arch/x86/kernel/acpi/osi.c @@ -34,6 +34,8 @@ ACPI_MODULE_NAME("osl");

#define PREFIX "ACPI: "

+static void __init acpi_osi_setup_late(void); + /* * The story of _OSI(Linux) * @@ -72,10 +74,14 @@ static struct osi_linux { unsigned int dmi:1; unsigned int cmdline:1; unsigned int default_disabling:1; -} osi_linux = {0, 0, 0, 0}; + unsigned int interfaces_added:1; +} osi_linux = {0, 0, 0, 0, 0};

u32 acpi_osi_handler(acpi_string interface, u32 supported) { + if (!osi_linux.interfaces_added) + acpi_osi_setup_late(); + if (!strcmp("Linux", interface)) {

printk_once(KERN_NOTICE FW_BUG PREFIX @@ -98,3 +104,152 @@ u32 acpi_osi_handler(acpi_string interface, u32 supported) return supported; }

+#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */ +#define OSI_STRING_ENTRIES_MAX 16 /* arbitrary */ + +struct osi_setup_entry { + char string[OSI_STRING_LENGTH_MAX]; + bool enable; +}; + +static struct osi_setup_entry + osi_setup_entries[OSI_STRING_ENTRIES_MAX] = { + {"Module Device", true}, + {"Processor Device", true}, + {"3.0 _SCP Extensions", true}, + {"Processor Aggregator Device", true}, +}; + +void __init acpi_osi_setup(char *str) +{ + struct osi_setup_entry *osi; + bool enable = true; + int i; + + if (!acpi_gbl_create_osi_method) + return; + + if (str == NULL || *str == '\0') { + printk(KERN_INFO PREFIX "_OSI method disabled\n"); + acpi_gbl_create_osi_method = FALSE; + return; + } + + if (*str == '!') { + str++; + if (*str == '\0') { + osi_linux.default_disabling = 1; + return; + } else if (*str == '*') { + acpi_update_interfaces(ACPI_DISABLE_ALL_STRINGS); + for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) { + osi = &osi_setup_entries[i]; + osi->enable = false; + } + return; + } + enable = false; + } + + for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) { + osi = &osi_setup_entries[i]; + if (!strcmp(osi->string, str)) { + osi->enable = enable; + break; + } else if (osi->string[0] == '\0') { + osi->enable = enable; + strncpy(osi->string, str, OSI_STRING_LENGTH_MAX); + break; + } + } +} + +static void __init set_osi_linux(unsigned int enable) +{ + if (osi_linux.enable != enable) + osi_linux.enable = enable; + + if (osi_linux.enable) + acpi_osi_setup("Linux"); + else + acpi_osi_setup("!Linux"); + + return; +} + +static void __init acpi_cmdline_osi_linux(unsigned int enable) +{ + osi_linux.cmdline = 1; /* cmdline set the default and override DMI */ + osi_linux.dmi = 0; + set_osi_linux(enable); + + return; +} + +void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d) +{ + printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); + + if (enable == -1) + return; + + osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */ + set_osi_linux(enable); + + return; +} + +/* + * Modify the list of "OS Interfaces" reported to BIOS via _OSI + * + * empty string disables _OSI + * string starting with '!' disables that string + * otherwise string is added to list, augmenting built-in strings + */ +static void __init acpi_osi_setup_late(void) +{ + struct osi_setup_entry *osi; + char *str; + int i; + acpi_status status; + + if (osi_linux.default_disabling) { + status = acpi_update_interfaces(ACPI_DISABLE_ALL_VENDOR_STRINGS); + + if (ACPI_SUCCESS(status)) + printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors\n"); + } + + for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) { + osi = &osi_setup_entries[i]; + str = osi->string; + + if (*str == '\0') + break; + if (osi->enable) { + status = acpi_install_interface(str); + + if (ACPI_SUCCESS(status)) + printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str); + } else { + status = acpi_remove_interface(str); + + if (ACPI_SUCCESS(status)) + printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str); + } + } +} + +static int __init osi_setup(char *str) +{ + if (str && !strcmp("Linux", str)) + acpi_cmdline_osi_linux(1); + else if (str && !strcmp("!Linux", str)) + acpi_cmdline_osi_linux(0); + else + acpi_osi_setup(str); + + return 1; +} + +__setup("acpi_osi=", osi_setup); diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index c346011..3fc0ad3 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -9,7 +9,6 @@ ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT # ACPI Boot-Time Table Parsing # obj-y += tables.o -obj-$(CONFIG_X86) += blacklist.o

# # ACPI Core Subsystem (Interpreter) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c deleted file mode 100644 index 9b693d5..0000000 --- a/drivers/acpi/blacklist.c +++ /dev/null @@ -1,323 +0,0 @@ -/* - * blacklist.c - * - * Check to see if the given machine has a known bad ACPI BIOS - * or if the BIOS is too old. - * Check given machine against acpi_osi_dmi_table[]. - * - * Copyright (C) 2004 Len Brown len.brown@intel.com - * Copyright (C) 2002 Andy Grover andrew.grover@intel.com - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/acpi.h> -#include <linux/dmi.h> - -#include "internal.h" - -enum acpi_blacklist_predicates { - all_versions, - less_than_or_equal, - equal, - greater_than_or_equal, -}; - -struct acpi_blacklist_item { - char oem_id[7]; - char oem_table_id[9]; - u32 oem_revision; - char *table; - enum acpi_blacklist_predicates oem_revision_predicate; - char *reason; - u32 is_critical_error; -}; - -static struct dmi_system_id acpi_osi_dmi_table[] __initdata; - -/* - * POLICY: If *anything* doesn't work, put it on the blacklist. - * If they are critical errors, mark it critical, and abort driver load. - */ -static struct acpi_blacklist_item acpi_blacklist[] __initdata = { - /* Compaq Presario 1700 */ - {"PTLTD ", " DSDT ", 0x06040000, ACPI_SIG_DSDT, less_than_or_equal, - "Multiple problems", 1}, - /* Sony FX120, FX140, FX150? */ - {"SONY ", "U0 ", 0x20010313, ACPI_SIG_DSDT, less_than_or_equal, - "ACPI driver problem", 1}, - /* Compaq Presario 800, Insyde BIOS */ - {"INT440", "SYSFexxx", 0x00001001, ACPI_SIG_DSDT, less_than_or_equal, - "Does not use _REG to protect EC OpRegions", 1}, - /* IBM 600E - _ADR should return 7, but it returns 1 */ - {"IBM ", "TP600E ", 0x00000105, ACPI_SIG_DSDT, less_than_or_equal, - "Incorrect _ADR", 1}, - - {""} -}; - -int __init acpi_blacklisted(void) -{ - int i = 0; - int blacklisted = 0; - struct acpi_table_header table_header; - - while (acpi_blacklist[i].oem_id[0] != '\0') { - if (acpi_get_table_header(acpi_blacklist[i].table, 0, &table_header)) { - i++; - continue; - } - - if (strncmp(acpi_blacklist[i].oem_id, table_header.oem_id, 6)) { - i++; - continue; - } - - if (strncmp - (acpi_blacklist[i].oem_table_id, table_header.oem_table_id, - 8)) { - i++; - continue; - } - - if ((acpi_blacklist[i].oem_revision_predicate == all_versions) - || (acpi_blacklist[i].oem_revision_predicate == - less_than_or_equal - && table_header.oem_revision <= - acpi_blacklist[i].oem_revision) - || (acpi_blacklist[i].oem_revision_predicate == - greater_than_or_equal - && table_header.oem_revision >= - acpi_blacklist[i].oem_revision) - || (acpi_blacklist[i].oem_revision_predicate == equal - && table_header.oem_revision == - acpi_blacklist[i].oem_revision)) { - - printk(KERN_ERR PREFIX - "Vendor "%6.6s" System "%8.8s" " - "Revision 0x%x has a known ACPI BIOS problem.\n", - acpi_blacklist[i].oem_id, - acpi_blacklist[i].oem_table_id, - acpi_blacklist[i].oem_revision); - - printk(KERN_ERR PREFIX - "Reason: %s. This is a %s error\n", - acpi_blacklist[i].reason, - (acpi_blacklist[i]. - is_critical_error ? "non-recoverable" : - "recoverable")); - - blacklisted = acpi_blacklist[i].is_critical_error; - break; - } else { - i++; - } - } - - dmi_check_system(acpi_osi_dmi_table); - - return blacklisted; -} -#ifdef CONFIG_DMI -static int __init dmi_enable_osi_linux(const struct dmi_system_id *d) -{ - acpi_dmi_osi_linux(1, d); /* enable */ - return 0; -} -static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) -{ - printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); - acpi_osi_setup("!Windows 2006"); - acpi_osi_setup("!Windows 2006 SP1"); - acpi_osi_setup("!Windows 2006 SP2"); - return 0; -} -static int __init dmi_disable_osi_win7(const struct dmi_system_id *d) -{ - printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); - acpi_osi_setup("!Windows 2009"); - return 0; -} -static int __init dmi_disable_osi_win8(const struct dmi_system_id *d) -{ - printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); - acpi_osi_setup("!Windows 2012"); - return 0; -} - -static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { - { - .callback = dmi_disable_osi_vista, - .ident = "Fujitsu Siemens", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), - }, - }, - { - /* - * There have a NVIF method in MSI GX723 DSDT need call by Nvidia - * driver (e.g. nouveau) when user press brightness hotkey. - * Currently, nouveau driver didn't do the job and it causes there - * have a infinite while loop in DSDT when user press hotkey. - * We add MSI GX723's dmi information to this table for workaround - * this issue. - * Will remove MSI GX723 from the table after nouveau grows support. - */ - .callback = dmi_disable_osi_vista, - .ident = "MSI GX723", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), - DMI_MATCH(DMI_PRODUCT_NAME, "GX723"), - }, - }, - { - .callback = dmi_disable_osi_vista, - .ident = "Sony VGN-NS10J_S", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS10J_S"), - }, - }, - { - .callback = dmi_disable_osi_vista, - .ident = "Sony VGN-SR290J", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR290J"), - }, - }, - { - .callback = dmi_disable_osi_vista, - .ident = "VGN-NS50B_L", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS50B_L"), - }, - }, - { - .callback = dmi_disable_osi_vista, - .ident = "Toshiba Satellite L355", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - DMI_MATCH(DMI_PRODUCT_VERSION, "Satellite L355"), - }, - }, - { - .callback = dmi_disable_osi_win7, - .ident = "ASUS K50IJ", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "K50IJ"), - }, - }, - { - .callback = dmi_disable_osi_vista, - .ident = "Toshiba P305D", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P305D"), - }, - }, - { - .callback = dmi_disable_osi_vista, - .ident = "Toshiba NB100", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - DMI_MATCH(DMI_PRODUCT_NAME, "NB100"), - }, - }, - - /* - * The wireless hotkey does not work on those machines when - * returning true for _OSI("Windows 2012") - */ - { - .callback = dmi_disable_osi_win8, - .ident = "Dell Inspiron 7737", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7737"), - }, - }, - { - .callback = dmi_disable_osi_win8, - .ident = "Dell Inspiron 7537", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7537"), - }, - }, - { - .callback = dmi_disable_osi_win8, - .ident = "Dell Inspiron 5437", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5437"), - }, - }, - { - .callback = dmi_disable_osi_win8, - .ident = "Dell Inspiron 3437", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 3437"), - }, - }, - { - .callback = dmi_disable_osi_win8, - .ident = "Dell Vostro 3446", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3446"), - }, - }, - { - .callback = dmi_disable_osi_win8, - .ident = "Dell Vostro 3546", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3546"), - }, - }, - - /* - * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. - * Linux ignores it, except for the machines enumerated below. - */ - - /* - * Without this this EEEpc exports a non working WMI interface, with - * this it exports a working "good old" eeepc_laptop interface, fixing - * both brightness control, and rfkill not working. - */ - { - .callback = dmi_enable_osi_linux, - .ident = "Asus EEE PC 1015PX", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_PRODUCT_NAME, "1015PX"), - }, - }, - {} -}; - -#endif /* CONFIG_DMI */ diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index c7f1cd6..a0c9940 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -99,48 +99,6 @@ struct acpi_ioremap { static LIST_HEAD(acpi_ioremaps); static DEFINE_MUTEX(acpi_ioremap_lock);

-static void __init acpi_osi_setup_late(void); - -/* - * The story of _OSI(Linux) - * - * From pre-history through Linux-2.6.22, - * Linux responded TRUE upon a BIOS OSI(Linux) query. - * - * Unfortunately, reference BIOS writers got wind of this - * and put OSI(Linux) in their example code, quickly exposing - * this string as ill-conceived and opening the door to - * an un-bounded number of BIOS incompatibilities. - * - * For example, OSI(Linux) was used on resume to re-POST a - * video card on one system, because Linux at that time - * could not do a speedy restore in its native driver. - * But then upon gaining quick native restore capability, - * Linux has no way to tell the BIOS to skip the time-consuming - * POST -- putting Linux at a permanent performance disadvantage. - * On another system, the BIOS writer used OSI(Linux) - * to infer native OS support for IPMI! On other systems, - * OSI(Linux) simply got in the way of Linux claiming to - * be compatible with other operating systems, exposing - * BIOS issues such as skipped device initialization. - * - * So "Linux" turned out to be a really poor chose of - * OSI string, and from Linux-2.6.23 onward we respond FALSE. - * - * BIOS writers should NOT query _OSI(Linux) on future systems. - * Linux will complain on the console when it sees it, and return FALSE. - * To get Linux to return TRUE for your system will require - * a kernel source update to add a DMI entry, - * or boot with "acpi_osi=Linux" - */ - -static struct osi_linux { - unsigned int enable:1; - unsigned int dmi:1; - unsigned int cmdline:1; - unsigned int default_disabling:1; -} osi_linux = {0, 0, 0, 0}; - static void __init acpi_request_region (struct acpi_generic_address *gas, unsigned int length, char *desc) { @@ -1394,156 +1352,6 @@ static int __init acpi_os_name_setup(char *str)

__setup("acpi_os_name=", acpi_os_name_setup);

-#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */ -#define OSI_STRING_ENTRIES_MAX 16 /* arbitrary */ - -struct osi_setup_entry { - char string[OSI_STRING_LENGTH_MAX]; - bool enable; -}; - -static struct osi_setup_entry - osi_setup_entries[OSI_STRING_ENTRIES_MAX] __initdata = { - {"Module Device", true}, - {"Processor Device", true}, - {"3.0 _SCP Extensions", true}, - {"Processor Aggregator Device", true}, -}; - -void __init acpi_osi_setup(char *str) -{ - struct osi_setup_entry *osi; - bool enable = true; - int i; - - if (!acpi_gbl_create_osi_method) - return; - - if (str == NULL || *str == '\0') { - printk(KERN_INFO PREFIX "_OSI method disabled\n"); - acpi_gbl_create_osi_method = FALSE; - return; - } - - if (*str == '!') { - str++; - if (*str == '\0') { - osi_linux.default_disabling = 1; - return; - } else if (*str == '*') { - acpi_update_interfaces(ACPI_DISABLE_ALL_STRINGS); - for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) { - osi = &osi_setup_entries[i]; - osi->enable = false; - } - return; - } - enable = false; - } - - for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) { - osi = &osi_setup_entries[i]; - if (!strcmp(osi->string, str)) { - osi->enable = enable; - break; - } else if (osi->string[0] == '\0') { - osi->enable = enable; - strncpy(osi->string, str, OSI_STRING_LENGTH_MAX); - break; - } - } -} - -static void __init set_osi_linux(unsigned int enable) -{ - if (osi_linux.enable != enable) - osi_linux.enable = enable; - - if (osi_linux.enable) - acpi_osi_setup("Linux"); - else - acpi_osi_setup("!Linux"); - - return; -} - -static void __init acpi_cmdline_osi_linux(unsigned int enable) -{ - osi_linux.cmdline = 1; /* cmdline set the default and override DMI */ - osi_linux.dmi = 0; - set_osi_linux(enable); - - return; -} - -void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d) -{ - printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); - - if (enable == -1) - return; - - osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */ - set_osi_linux(enable); - - return; -} - -/* - * Modify the list of "OS Interfaces" reported to BIOS via _OSI - * - * empty string disables _OSI - * string starting with '!' disables that string - * otherwise string is added to list, augmenting built-in strings - */ -static void __init acpi_osi_setup_late(void) -{ - struct osi_setup_entry *osi; - char *str; - int i; - acpi_status status; - - if (osi_linux.default_disabling) { - status = acpi_update_interfaces(ACPI_DISABLE_ALL_VENDOR_STRINGS); - - if (ACPI_SUCCESS(status)) - printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors\n"); - } - - for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) { - osi = &osi_setup_entries[i]; - str = osi->string; - - if (*str == '\0') - break; - if (osi->enable) { - status = acpi_install_interface(str); - - if (ACPI_SUCCESS(status)) - printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str); - } else { - status = acpi_remove_interface(str); - - if (ACPI_SUCCESS(status)) - printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str); - } - } -} - -static int __init osi_setup(char *str) -{ - if (str && !strcmp("Linux", str)) - acpi_cmdline_osi_linux(1); - else if (str && !strcmp("!Linux", str)) - acpi_cmdline_osi_linux(0); - else - acpi_osi_setup(str); - - return 1; -} - -__setup("acpi_osi=", osi_setup); - /* * Disable the auto-serialization of named objects creation methods. * @@ -1828,7 +1636,6 @@ acpi_status __init acpi_os_initialize1(void) BUG_ON(!kacpi_notify_wq); BUG_ON(!kacpi_hotplug_wq); acpi_install_interface_handler(acpi_osi_handler); - acpi_osi_setup_late(); return AE_OK; }

diff --git a/include/linux/acpi.h b/include/linux/acpi.h index ec18ab0..b345015 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -268,9 +268,6 @@ static inline int acpi_video_display_switch_support(void)

#endif /* defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) */

-extern int acpi_blacklisted(void); -extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d); -extern void acpi_osi_setup(char *str); extern u32 acpi_osi_handler(acpi_string interface, u32 supported);

#ifdef CONFIG_ACPI_NUMA