From: Fu Wei fu.wei@linaro.org

This patch add a new enum "spi_nr" and use it in the driver. Just for code's readability, no functional change.

Signed-off-by: Fu Wei fu.wei@linaro.org --- drivers/clocksource/arm_arch_timer.c | 4 ++-- include/clocksource/arm_arch_timer.h | 6 ++++++ 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index cb08d63..b12fabd 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -843,9 +843,9 @@ static int __init arch_timer_mem_init(struct device_node *np) }

if (arch_timer_mem_use_virtual) - irq = irq_of_parse_and_map(best_frame, 1); + irq = irq_of_parse_and_map(best_frame, VIRT_SPI); else - irq = irq_of_parse_and_map(best_frame, 0); + irq = irq_of_parse_and_map(best_frame, PHYS_SPI);

ret = -EINVAL; if (!irq) { diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h index 6f06481..16dcd10 100644 --- a/include/clocksource/arm_arch_timer.h +++ b/include/clocksource/arm_arch_timer.h @@ -45,6 +45,12 @@ enum ppi_nr { MAX_TIMER_PPI };

+enum spi_nr { + PHYS_SPI, + VIRT_SPI, + MAX_TIMER_SPI +}; + #define ARCH_TIMER_PHYS_ACCESS 0 #define ARCH_TIMER_VIRT_ACCESS 1 #define ARCH_TIMER_MEM_PHYS_ACCESS 2

From: Fu Wei fu.wei@linaro.org

This patch adds support for parsing arch timer in GTDT, provides some kernel APIs to parse all the PPIs and always-on info in GTDT and export them.

By this driver, we can simplify arm_arch_timer drivers, and separate the ACPI GTDT knowledge from it.

Signed-off-by: Fu Wei fu.wei@linaro.org Signed-off-by: Hanjun Guo hanjun.guo@linaro.org --- arch/arm64/Kconfig | 1 + drivers/acpi/Kconfig | 5 ++ drivers/acpi/Makefile | 1 + drivers/acpi/arm64/Kconfig | 5 ++ drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/acpi_gtdt.c | 152 +++++++++++++++++++++++++++++++++++++++++ drivers/clocksource/Kconfig | 1 - include/linux/acpi.h | 6 ++ 8 files changed, 171 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 5a0a691..0b9fba7 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -2,6 +2,7 @@ config ARM64 def_bool y select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI + select ACPI_GTDT if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index b7e2e77..1cdc7d2 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -521,4 +521,9 @@ config XPOWER_PMIC_OPREGION

endif

+if ARM64 +source "drivers/acpi/arm64/Kconfig" + +endif + endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 251ce85..1a94ff7 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -99,5 +99,6 @@ obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o +obj-$(CONFIG_ARM64) += arm64/

video-objs += acpi_video.o video_detect.o diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig new file mode 100644 index 0000000..80201be --- /dev/null +++ b/drivers/acpi/arm64/Kconfig @@ -0,0 +1,5 @@ +# +# ACPI Configuration for ARM64 +# +config ACPI_GTDT + bool diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile new file mode 100644 index 0000000..466de6b --- /dev/null +++ b/drivers/acpi/arm64/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ACPI_GTDT) += acpi_gtdt.o diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c new file mode 100644 index 0000000..cdb2fb1 --- /dev/null +++ b/drivers/acpi/arm64/acpi_gtdt.c @@ -0,0 +1,152 @@ +/* + * ARM Specific GTDT table Support + * + * Copyright (C) 2016, Linaro Ltd. + * Author: Daniel Lezcano daniel.lezcano@linaro.org + * Fu Wei fu.wei@linaro.org + * Hanjun Guo hanjun.guo@linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/init.h> +#include <linux/kernel.h> + +#include <clocksource/arm_arch_timer.h> + +#undef pr_fmt +#define pr_fmt(fmt) "ACPI GTDT: " fmt + +typedef struct { + struct acpi_table_gtdt *gtdt; + void *platform_timer_start; + void *gtdt_end; +} acpi_gtdt_desc_t; + +static acpi_gtdt_desc_t acpi_gtdt_desc __initdata; + +static inline void *next_platform_timer(void *platform_timer) +{ + struct acpi_gtdt_header *gh = platform_timer; + + platform_timer += gh->length; + if (platform_timer < acpi_gtdt_desc.gtdt_end) + return platform_timer; + + return NULL; +} + +#define for_each_platform_timer(_g) \ + for (_g = acpi_gtdt_desc.platform_timer_start; _g; \ + _g = next_platform_timer(_g)) + +static inline bool is_timer_block(void *platform_timer) +{ + struct acpi_gtdt_header *gh = platform_timer; + + return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK; +} + +static inline bool is_watchdog(void *platform_timer) +{ + struct acpi_gtdt_header *gh = platform_timer; + + return gh->type == ACPI_GTDT_TYPE_WATCHDOG; +} + +static int __init map_gt_gsi(u32 interrupt, u32 flags) +{ + int trigger, polarity; + + if (!interrupt) + return 0; + + trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE + : ACPI_LEVEL_SENSITIVE; + + polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW + : ACPI_ACTIVE_HIGH; + + return acpi_register_gsi(NULL, interrupt, trigger, polarity); +} + +/* + * Map the PPIs of per-cpu arch_timer. + * @type: the type of PPI + * Returns 0 if error. + */ +int __init acpi_gtdt_map_ppi(int type) +{ + struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt; + + switch (type) { + case PHYS_SECURE_PPI: + return map_gt_gsi(gtdt->secure_el1_interrupt, + gtdt->secure_el1_flags); + case PHYS_NONSECURE_PPI: + return map_gt_gsi(gtdt->non_secure_el1_interrupt, + gtdt->non_secure_el1_flags); + case VIRT_PPI: + return map_gt_gsi(gtdt->virtual_timer_interrupt, + gtdt->virtual_timer_flags); + + case HYP_PPI: + return map_gt_gsi(gtdt->non_secure_el2_interrupt, + gtdt->non_secure_el2_flags); + default: + pr_err("Failed to map timer interrupt: invalid type.\n"); + } + + return 0; +} + +/* + * acpi_gtdt_c3stop - got c3stop info from GTDT + * + * Returns 1 if the timer is powered in deep idle state, 0 otherwise. + */ +bool __init acpi_gtdt_c3stop(void) +{ + struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt; + + return !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON); +} + +/* + * Get some basic info from GTDT table, and init the global variables above + * for all timers initialization of Generic Timer. + * This function does some validation on GTDT table. + */ +int __init acpi_gtdt_init(struct acpi_table_header *table) +{ + void *start; + struct acpi_table_gtdt *gtdt; + + gtdt = container_of(table, struct acpi_table_gtdt, header); + + acpi_gtdt_desc.gtdt = gtdt; + acpi_gtdt_desc.gtdt_end = (void *)table + table->length; + + if (table->revision < 2) { + pr_debug("Revision:%d doesn't support Platform Timers.\n", + table->revision); + return 0; + } + + if (!gtdt->platform_timer_count) { + pr_debug("No Platform Timer.\n"); + return 0; + } + + start = (void *)gtdt + gtdt->platform_timer_offset; + if (start < (void *)table + sizeof(struct acpi_table_gtdt)) { + pr_err(FW_BUG "Failed to retrieve timer info from firmware: invalid data.\n"); + return -EINVAL; + } + acpi_gtdt_desc.platform_timer_start = start; + + return gtdt->platform_timer_count; +} diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 5677886..b58d259 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -285,7 +285,6 @@ config CLKSRC_MPS2 config ARM_ARCH_TIMER bool select CLKSRC_OF if OF - select CLKSRC_ACPI if ACPI

config ARM_ARCH_TIMER_EVTSTREAM bool "Enable ARM architected timer event stream generation by default" diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 288fac5..fb8b689 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -532,6 +532,12 @@ void acpi_walk_dep_device_list(acpi_handle handle); struct platform_device *acpi_create_platform_device(struct acpi_device *); #define ACPI_PTR(_ptr) (_ptr)

+#ifdef CONFIG_ACPI_GTDT +int acpi_gtdt_init(struct acpi_table_header *table); +int acpi_gtdt_map_ppi(int type); +bool acpi_gtdt_c3stop(void); +#endif + #else /* !CONFIG_ACPI */

#define acpi_disabled 1

From: Fu Wei fu.wei@linaro.org

On platforms booting with ACPI, architected memory-mapped timers' configuration data is provided by firmware through the ACPI GTDT static table.

The clocksource architected timer kernel driver requires a firmware interface to collect timer configuration and configure its driver. this infrastructure is present for device tree systems, but it is missing on systems booting with ACPI.

Implement the kernel infrastructure required to parse the static ACPI GTDT table so that the architected timer clocksource driver can make use of it on systems booting with ACPI, therefore enabling the corresponding timers configuration.

Signed-off-by: Fu Wei fu.wei@linaro.org Signed-off-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/acpi/arm64/acpi_gtdt.c | 70 ++++++++++++++++++++++++++++++++++++ include/clocksource/arm_arch_timer.h | 15 ++++++++ include/linux/acpi.h | 1 + 3 files changed, 86 insertions(+)

diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c index cdb2fb1..0159175 100644 --- a/drivers/acpi/arm64/acpi_gtdt.c +++ b/drivers/acpi/arm64/acpi_gtdt.c @@ -150,3 +150,73 @@ int __init acpi_gtdt_init(struct acpi_table_header *table)

return gtdt->platform_timer_count; } + +static int __init gtdt_parse_gt_block(struct acpi_gtdt_timer_block *block, + struct gt_block_data *data) +{ + struct acpi_gtdt_timer_entry *frame; + int i; + + if (!block || !data) + return -EINVAL; + + if (!block->block_address || !block->timer_count) + return -EINVAL; + + data->cntctlbase_phy = (phys_addr_t)block->block_address; + data->timer_count = block->timer_count; + + frame = (void *)block + block->timer_offset; + if (frame + block->timer_count != (void *)block + block->header.length) + return -EINVAL; + + /* + * Get the GT timer Frame data for every GT Block Timer + */ + for (i = 0; i < block->timer_count; i++, frame++) { + if (!frame->base_address || !frame->timer_interrupt) + return -EINVAL; + + data->timer[i].irq = map_gt_gsi(frame->timer_interrupt, + frame->timer_flags); + if (data->timer[i].irq <= 0) + return -EINVAL; + + if (frame->virtual_timer_interrupt) { + data->timer[i].virtual_irq = + map_gt_gsi(frame->virtual_timer_interrupt, + frame->virtual_timer_flags); + if (data->timer[i].virtual_irq <= 0) + return -EINVAL; + } + + data->timer[i].frame_nr = frame->frame_number; + data->timer[i].cntbase_phy = frame->base_address; + } + + return 0; +} + +/* + * Get the GT block info for memory-mapped timer from GTDT table. + */ +int __init gtdt_arch_timer_mem_init(struct gt_block_data *data) +{ + void *platform_timer; + int index = 0; + int ret; + + for_each_platform_timer(platform_timer) { + if (!is_timer_block(platform_timer)) + continue; + ret = gtdt_parse_gt_block(platform_timer, data + index); + if (ret) + return ret; + index++; + } + + if (index) + pr_info("found %d memory-mapped timer block(s).\n", index); + + return index; +} diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h index 16dcd10..94a5d14 100644 --- a/include/clocksource/arm_arch_timer.h +++ b/include/clocksource/arm_arch_timer.h @@ -56,6 +56,8 @@ enum spi_nr { #define ARCH_TIMER_MEM_PHYS_ACCESS 2 #define ARCH_TIMER_MEM_VIRT_ACCESS 3

+#define ARCH_TIMER_MEM_MAX_FRAME 8 + #define ARCH_TIMER_USR_PCT_ACCESS_EN (1 << 0) /* physical counter */ #define ARCH_TIMER_USR_VCT_ACCESS_EN (1 << 1) /* virtual counter */ #define ARCH_TIMER_VIRT_EVT_EN (1 << 2) @@ -71,6 +73,19 @@ struct arch_timer_kvm_info { int virtual_irq; };

+struct gt_timer_data { + int frame_nr; + phys_addr_t cntbase_phy; + int irq; + int virtual_irq; +}; + +struct gt_block_data { + phys_addr_t cntctlbase_phy; + int timer_count; + struct gt_timer_data timer[ARCH_TIMER_MEM_MAX_FRAME]; +}; + #ifdef CONFIG_ARM_ARCH_TIMER

extern u32 arch_timer_get_rate(void); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index fb8b689..24b1750 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -536,6 +536,7 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *); int acpi_gtdt_init(struct acpi_table_header *table); int acpi_gtdt_map_ppi(int type); bool acpi_gtdt_c3stop(void); +int gtdt_arch_timer_mem_init(struct gt_block_data *data); #endif

#else /* !CONFIG_ACPI */

From: Fu Wei fu.wei@linaro.org

This driver adds support for parsing SBSA Generic Watchdog timer in GTDT, parse all info in SBSA Generic Watchdog Structure in GTDT, and creating a platform device with that information.

This allows the operating system to obtain device data from the resource of platform device. The platform device named "sbsa-gwdt" can be used by the ARM SBSA Generic Watchdog driver.

Signed-off-by: Fu Wei fu.wei@linaro.org Signed-off-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/acpi/arm64/acpi_gtdt.c | 87 ++++++++++++++++++++++++++++++++++++++++++ drivers/watchdog/Kconfig | 1 + 2 files changed, 88 insertions(+)

diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c index 0159175..05e838f 100644 --- a/drivers/acpi/arm64/acpi_gtdt.c +++ b/drivers/acpi/arm64/acpi_gtdt.c @@ -14,6 +14,7 @@ #include <linux/acpi.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_device.h>

#include <clocksource/arm_arch_timer.h>

@@ -220,3 +221,89 @@ int __init gtdt_arch_timer_mem_init(struct gt_block_data *data)

return index; } + +/* + * Initialize a SBSA generic Watchdog platform device info from GTDT + */ +static int __init gtdt_import_sbsa_gwdt(struct acpi_gtdt_watchdog *wd, + int index) +{ + struct platform_device *pdev; + int irq = map_gt_gsi(wd->timer_interrupt, wd->timer_flags); + int no_irq = 1; + + /* + * According to SBSA specification the size of refresh and control + * frames of SBSA Generic Watchdog is SZ_4K(Offset 0x000 – 0xFFF). + */ + struct resource res[] = { + DEFINE_RES_MEM(wd->control_frame_address, SZ_4K), + DEFINE_RES_MEM(wd->refresh_frame_address, SZ_4K), + DEFINE_RES_IRQ(irq), + }; + + pr_debug("found a Watchdog (0x%llx/0x%llx gsi:%u flags:0x%x).\n", + wd->refresh_frame_address, wd->control_frame_address, + wd->timer_interrupt, wd->timer_flags); + + if (!(wd->refresh_frame_address && wd->control_frame_address)) { + pr_err(FW_BUG "failed to get the Watchdog base address.\n"); + return -EINVAL; + } + + if (!wd->timer_interrupt) + pr_warn(FW_BUG "failed to get the Watchdog interrupt.\n"); + else if (irq <= 0) + pr_warn("failed to map the Watchdog interrupt.\n"); + else + no_irq = 0; + + /* + * Add a platform device named "sbsa-gwdt" to match the platform driver. + * "sbsa-gwdt": SBSA(Server Base System Architecture) Generic Watchdog + * The platform driver (like drivers/watchdog/sbsa_gwdt.c)can get device + * info below by matching this name. + */ + pdev = platform_device_register_simple("sbsa-gwdt", index, res, + ARRAY_SIZE(res) - no_irq); + if (IS_ERR(pdev)) { + acpi_unregister_gsi(wd->timer_interrupt); + return PTR_ERR(pdev); + } + + return 0; +} + +static int __init gtdt_sbsa_gwdt_init(void) +{ + struct acpi_table_header *table; + void *platform_timer; + int index = 0; + int ret; + + if (acpi_disabled) + return 0; + + if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_GTDT, 0, &table))) + return -EINVAL; + + ret = acpi_gtdt_init(table); + if (ret <= 0) + return ret; + + for_each_platform_timer(platform_timer) { + if (!is_watchdog(platform_timer)) + continue; + ret = gtdt_import_sbsa_gwdt(platform_timer, index); + if (ret) + break; + index++; + } + + if (index) + pr_info("found %d SBSA generic Watchdog(s).\n", index); + + return ret; +} + +device_initcall(gtdt_sbsa_gwdt_init); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index b4b3e25..4019792 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -206,6 +206,7 @@ config ARM_SBSA_WATCHDOG tristate "ARM SBSA Generic Watchdog" depends on ARM64 depends on ARM_ARCH_TIMER + depends on ACPI_GTDT || !ACPI select WATCHDOG_CORE help ARM SBSA Generic Watchdog has two stage timeouts: