IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapp...

Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers.

For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point.

Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation

IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table.

Signed-off-by: Tomasz Nowicki tn@semihalf.com Acked-by: Rafael J. Wysocki rjw@rjwysocki.net Reviewed-by: Hanjun Guo hanjun.guo@linaro.org Reviewed-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com --- drivers/acpi/Kconfig | 4 + drivers/acpi/Makefile | 2 + drivers/acpi/arm64/Kconfig | 6 ++ drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/iort.c | 214 ++++++++++++++++++++++++++++++++++++++++++++ drivers/acpi/bus.c | 2 + include/linux/acpi_iort.h | 30 +++++++ 7 files changed, 259 insertions(+) create mode 100644 drivers/acpi/arm64/Kconfig create mode 100644 drivers/acpi/arm64/Makefile create mode 100644 drivers/acpi/arm64/iort.c create mode 100644 include/linux/acpi_iort.h

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 445ce28..d5c0614 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -521,4 +521,8 @@ config ACPI_CONFIGFS userspace. The configurable ACPI groups will be visible under /config/acpi, assuming configfs is mounted under /config.

+if ARM64 +source "drivers/acpi/arm64/Kconfig" +endif + endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 5ae9d85..e5ada78 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -105,3 +105,5 @@ obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o

video-objs += acpi_video.o video_detect.o obj-y += dptf/ + +obj-$(CONFIG_ARM64) += arm64/ diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig new file mode 100644 index 0000000..4616da4 --- /dev/null +++ b/drivers/acpi/arm64/Kconfig @@ -0,0 +1,6 @@ +# +# ACPI Configuration for ARM64 +# + +config ACPI_IORT + bool diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile new file mode 100644 index 0000000..72331f2 --- /dev/null +++ b/drivers/acpi/arm64/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ACPI_IORT) += iort.o diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c new file mode 100644 index 0000000..3eaeb66 --- /dev/null +++ b/drivers/acpi/arm64/iort.c @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2016, Semihalf + * Author: Tomasz Nowicki tn@semihalf.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * This file implements early detection/parsing of I/O mapping + * reported to OS through firmware via I/O Remapping Table (IORT) + * IORT document number: ARM DEN 0049A + */ + +#define pr_fmt(fmt) "ACPI: IORT: " fmt + +#include <linux/acpi_iort.h> +#include <linux/kernel.h> +#include <linux/pci.h> + +typedef acpi_status (*iort_find_node_callback) + (struct acpi_iort_node *node, void *context); + +/* Root pointer to the mapped IORT table */ +static struct acpi_table_header *iort_table; + +static LIST_HEAD(iort_msi_chip_list); +static DEFINE_SPINLOCK(iort_msi_chip_lock); + +static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type, + iort_find_node_callback callback, + void *context) +{ + struct acpi_iort_node *iort_node, *iort_end; + struct acpi_table_iort *iort; + int i; + + if (!iort_table) + return NULL; + + /* Get the first IORT node */ + iort = (struct acpi_table_iort *)iort_table; + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, + iort->node_offset); + iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, + iort_table->length); + + for (i = 0; i < iort->node_count; i++) { + if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND, + "IORT node pointer overflows, bad table!\n")) + return NULL; + + if (iort_node->type == type && + ACPI_SUCCESS(callback(iort_node, context))) + return iort_node; + + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, + iort_node->length); + } + + return NULL; +} + +static acpi_status iort_match_node_callback(struct acpi_iort_node *node, + void *context) +{ + struct device *dev = context; + acpi_status status; + + if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) { + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_device *adev = to_acpi_device_node(dev->fwnode); + struct acpi_iort_named_component *ncomp; + + if (!adev) { + status = AE_NOT_FOUND; + goto out; + } + + status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf); + if (ACPI_FAILURE(status)) { + dev_warn(dev, "Can't get device full path name\n"); + goto out; + } + + ncomp = (struct acpi_iort_named_component *)node->node_data; + status = !strcmp(ncomp->device_name, buf.pointer) ? + AE_OK : AE_NOT_FOUND; + acpi_os_free(buf.pointer); + } else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { + struct acpi_iort_root_complex *pci_rc; + struct pci_bus *bus; + + bus = to_pci_bus(dev); + pci_rc = (struct acpi_iort_root_complex *)node->node_data; + + /* + * It is assumed that PCI segment numbers maps one-to-one + * with root complexes. Each segment number can represent only + * one root complex. + */ + status = pci_rc->pci_segment_number == pci_domain_nr(bus) ? + AE_OK : AE_NOT_FOUND; + } +out: + return status; +} + +static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in, + u32 *rid_out) +{ + /* Single mapping does not care for input id */ + if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { + if (type == ACPI_IORT_NODE_NAMED_COMPONENT || + type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { + *rid_out = map->output_base; + return 0; + } + + pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n", + map, type); + return -ENXIO; + } + + if (rid_in < map->input_base || + (rid_in >= map->input_base + map->id_count)) + return -ENXIO; + + *rid_out = map->output_base + (rid_in - map->input_base); + return 0; +} + +static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node *node, + u32 rid_in, u32 *rid_out, + u8 type) +{ + u32 rid = rid_in; + + /* Parse the ID mapping tree to find specified node type */ + while (node) { + struct acpi_iort_id_mapping *map; + int i; + + if (node->type == type) { + if (rid_out) + *rid_out = rid; + return node; + } + + if (!node->mapping_offset || !node->mapping_count) + goto fail_map; + + map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, + node->mapping_offset); + + /* Firmware bug! */ + if (!map->output_reference) { + pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", + node, node->type); + goto fail_map; + } + + /* Do the RID translation */ + for (i = 0; i < node->mapping_count; i++, map++) { + if (!iort_id_map(map, node->type, rid, &rid)) + break; + } + + if (i == node->mapping_count) + goto fail_map; + + node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, + map->output_reference); + } + +fail_map: + /* Map input RID to output RID unchanged on mapping failure*/ + if (rid_out) + *rid_out = rid_in; + + return NULL; +} + +static struct acpi_iort_node *iort_find_dev_node(struct device *dev) +{ + struct pci_bus *pbus; + + if (!dev_is_pci(dev)) + return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, + iort_match_node_callback, dev); + + /* Find a PCI root bus */ + pbus = to_pci_dev(dev)->bus; + while (!pci_is_root_bus(pbus)) + pbus = pbus->parent; + + return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, + iort_match_node_callback, &pbus->dev); +} + +void __init acpi_iort_init(void) +{ + acpi_status status; + + status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + const char *msg = acpi_format_exception(status); + pr_err("Failed to get table, %s\n", msg); + } +} diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 85b7d07..e56e643 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -36,6 +36,7 @@ #ifdef CONFIG_X86 #include <asm/mpspec.h> #endif +#include <linux/acpi_iort.h> #include <linux/pci.h> #include <acpi/apei.h> #include <linux/dmi.h> @@ -1186,6 +1187,7 @@ static int __init acpi_init(void) }

pci_mmcfg_late_init(); + acpi_iort_init(); acpi_scan_init(); acpi_ec_init(); acpi_debugfs_init(); diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h new file mode 100644 index 0000000..fcacaf7 --- /dev/null +++ b/include/linux/acpi_iort.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2016, Semihalf + * Author: Tomasz Nowicki tn@semihalf.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef __ACPI_IORT_H__ +#define __ACPI_IORT_H__ + +#include <linux/acpi.h> + +#ifdef CONFIG_ACPI_IORT +void acpi_iort_init(void); +#else +static inline void acpi_iort_init(void) { } +#endif + +#endif /* __ACPI_IORT_H__ */

It is possible to provide information about which MSI controller to use on a per-device basis for DT. This patch supply this with ACPI support.

Currently, IORT is the only one ACPI table which can provide such mapping. In order to plug IORT into MSI infrastructure we are adding ACPI equivalents for finding PCI device domain and its RID translation (pci_msi_domain_get_msi_rid and pci_msi_domain_get_msi_rid calls).

Signed-off-by: Tomasz Nowicki tn@semihalf.com Reviewed-by: Hanjun Guo hanjun.guo@linaro.org Acked-by: Marc Zyngier marc.zyngier@arm.com Acked-by: Bjorn Helgaas bhelgaas@google.com --- drivers/pci/msi.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 98f1222..137b4c5 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -19,6 +19,7 @@ #include <linux/smp.h> #include <linux/errno.h> #include <linux/io.h> +#include <linux/acpi_iort.h> #include <linux/slab.h> #include <linux/irqdomain.h> #include <linux/of_irq.h> @@ -1502,8 +1503,8 @@ u32 pci_msi_domain_get_msi_rid(struct irq_domain *domain, struct pci_dev *pdev) pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid);

of_node = irq_domain_get_of_node(domain); - if (of_node) - rid = of_msi_map_rid(&pdev->dev, of_node, rid); + rid = of_node ? of_msi_map_rid(&pdev->dev, of_node, rid) : + iort_msi_map_rid(&pdev->dev, rid);

return rid; } @@ -1519,9 +1520,13 @@ u32 pci_msi_domain_get_msi_rid(struct irq_domain *domain, struct pci_dev *pdev) */ struct irq_domain *pci_msi_get_device_domain(struct pci_dev *pdev) { + struct irq_domain *dom; u32 rid = 0;

pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid); - return of_msi_map_get_device_domain(&pdev->dev, rid); + dom = of_msi_map_get_device_domain(&pdev->dev, rid); + if (!dom) + dom = iort_get_device_domain(&pdev->dev, rid); + return dom; } #endif /* CONFIG_PCI_MSI_IRQ_DOMAIN */

In order to add ACPI support we need to isolate ACPI&DT common code and move DT logic to corresponding functions. To achieve this we are using firmware agnostic handle which can be unpacked to either DT or ACPI node.

No functional changes other than a very minor one: 1. Terminate its_init call with -ENODEV for non-DT case which allows to remove hack from its-gic-v3.c. 2. Fix ITS base register address type (from 'unsigned long' to 'phys_addr_t'), as a bonus we get nice string formatting. 3. Since there is only one of ITS parent domain convert it to static global variable and drop the parameter from its_probe_one. Users can refer to it in more convenient way then.

Signed-off-by: Hanjun Guo hanjun.guo@linaro.org Signed-off-by: Tomasz Nowicki tn@semihalf.com --- drivers/irqchip/irq-gic-v3-its.c | 65 ++++++++++++++++++++++---------------- drivers/irqchip/irq-gic-v3.c | 7 ++-- include/linux/irqchip/arm-gic-v3.h | 4 +-- 3 files changed, 42 insertions(+), 34 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 943442d..c7518c7 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -75,7 +75,7 @@ struct its_node { raw_spinlock_t lock; struct list_head entry; void __iomem *base; - unsigned long phys_base; + phys_addr_t phys_base; struct its_cmd_block *cmd_base; struct its_cmd_block *cmd_write; struct its_baser tables[GITS_BASER_NR_REGS]; @@ -115,6 +115,7 @@ struct its_device { static LIST_HEAD(its_nodes); static DEFINE_SPINLOCK(its_lock); static struct rdists *gic_rdists; +static struct irq_domain *its_parent;

#define gic_data_rdist() (raw_cpu_ptr(gic_rdists->rdist)) #define gic_data_rdist_rd_base() (gic_data_rdist()->rd_base) @@ -1614,8 +1615,7 @@ static void its_enable_quirks(struct its_node *its) gic_enable_quirks(iidr, its_quirks, its); }

-static int its_init_domain(struct device_node *node, struct its_node *its, - struct irq_domain *parent) +static int its_init_domain(struct fwnode_handle *handle, struct its_node *its) { struct irq_domain *inner_domain; struct msi_domain_info *info; @@ -1624,13 +1624,13 @@ static int its_init_domain(struct device_node *node, struct its_node *its, if (!info) return -ENOMEM;

- inner_domain = irq_domain_add_tree(node, &its_domain_ops, its); + inner_domain = irq_domain_create_tree(handle, &its_domain_ops, its); if (!inner_domain) { kfree(info); return -ENOMEM; }

- inner_domain->parent = parent; + inner_domain->parent = its_parent; inner_domain->bus_token = DOMAIN_BUS_NEXUS; info->ops = &its_msi_domain_ops; info->data = its; @@ -1639,43 +1639,35 @@ static int its_init_domain(struct device_node *node, struct its_node *its, return 0; }

-static int __init its_probe(struct device_node *node, - struct irq_domain *parent) +static int __init its_probe_one(struct resource *res, + struct fwnode_handle *handle, int numa_node) { - struct resource res; struct its_node *its; void __iomem *its_base; u32 val; u64 baser, tmp; int err;

- err = of_address_to_resource(node, 0, &res); - if (err) { - pr_warn("%s: no regs?\n", node->full_name); - return -ENXIO; - } - - its_base = ioremap(res.start, resource_size(&res)); + its_base = ioremap(res->start, resource_size(res)); if (!its_base) { - pr_warn("%s: unable to map registers\n", node->full_name); + pr_warn("ITS@%pa: Unable to map ITS registers\n", &res->start); return -ENOMEM; }

val = readl_relaxed(its_base + GITS_PIDR2) & GIC_PIDR2_ARCH_MASK; if (val != 0x30 && val != 0x40) { - pr_warn("%s: no ITS detected, giving up\n", node->full_name); + pr_warn("ITS@%pa: No ITS detected, giving up\n", &res->start); err = -ENODEV; goto out_unmap; }

err = its_force_quiescent(its_base); if (err) { - pr_warn("%s: failed to quiesce, giving up\n", - node->full_name); + pr_warn("ITS@%pa: Failed to quiesce, giving up\n", &res->start); goto out_unmap; }

- pr_info("ITS: %s\n", node->full_name); + pr_info("ITS %pR\n", res);

its = kzalloc(sizeof(*its), GFP_KERNEL); if (!its) { @@ -1687,9 +1679,9 @@ static int __init its_probe(struct device_node *node, INIT_LIST_HEAD(&its->entry); INIT_LIST_HEAD(&its->its_device_list); its->base = its_base; - its->phys_base = res.start; + its->phys_base = res->start; its->ite_size = ((readl_relaxed(its_base + GITS_TYPER) >> 4) & 0xf) + 1; - its->numa_node = of_node_to_nid(node); + its->numa_node = numa_node;

its->cmd_base = kzalloc(ITS_CMD_QUEUE_SZ, GFP_KERNEL); if (!its->cmd_base) { @@ -1736,7 +1728,7 @@ static int __init its_probe(struct device_node *node, writeq_relaxed(0, its->base + GITS_CWRITER); writel_relaxed(GITS_CTLR_ENABLE, its->base + GITS_CTLR);

- err = its_init_domain(node, its, parent); + err = its_init_domain(handle, its); if (err) goto out_free_tables;

@@ -1754,7 +1746,7 @@ out_free_its: kfree(its); out_unmap: iounmap(its_base); - pr_err("ITS: failed probing %s (%d)\n", node->full_name, err); + pr_err("ITS@%pa: failed probing (%d)\n", &res->start, err); return err; }

@@ -1782,10 +1774,10 @@ static struct of_device_id its_device_id[] = { {}, };

-int __init its_init(struct device_node *node, struct rdists *rdists, - struct irq_domain *parent_domain) +static int __init its_of_probe(struct device_node *node) { struct device_node *np; + struct resource res;

for (np = of_find_matching_node(node, its_device_id); np; np = of_find_matching_node(np, its_device_id)) { @@ -1795,8 +1787,27 @@ int __init its_init(struct device_node *node, struct rdists *rdists, continue; }

- its_probe(np, parent_domain); + if (of_address_to_resource(np, 0, &res)) { + pr_warn("%s: no regs?\n", np->full_name); + continue; + } + + its_probe_one(&res, &np->fwnode, of_node_to_nid(np)); } + return 0; +} + +int __init its_init(struct fwnode_handle *handle, struct rdists *rdists, + struct irq_domain *parent_domain) +{ + struct device_node *of_node; + + its_parent = parent_domain; + of_node = to_of_node(handle); + if (of_node) + its_of_probe(of_node); + else + return -ENODEV;

if (list_empty(&its_nodes)) { pr_warn("ITS: No ITS available, not enabling LPIs\n"); diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index ede5672..1efc02a 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -910,7 +910,6 @@ static int __init gic_init_bases(void __iomem *dist_base, u64 redist_stride, struct fwnode_handle *handle) { - struct device_node *node; u32 typer; int gic_irqs; int err; @@ -951,10 +950,8 @@ static int __init gic_init_bases(void __iomem *dist_base,

set_handle_irq(gic_handle_irq);

- node = to_of_node(handle); - if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis() && - node) /* Temp hack to prevent ITS init for ACPI */ - its_init(node, &gic_data.rdists, gic_data.domain); + if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis()) + its_init(handle, &gic_data.rdists, gic_data.domain);

gic_smp_init(); gic_dist_init(); diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index 99ac022..8361c8d 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h @@ -430,9 +430,9 @@ struct rdists { };

struct irq_domain; -struct device_node; +struct fwnode_handle; int its_cpu_init(void); -int its_init(struct device_node *node, struct rdists *rdists, +int its_init(struct fwnode_handle *handle, struct rdists *rdists, struct irq_domain *domain);

static inline bool gic_enable_sre(void)

Firmware agnostic code lands in common functions which do necessary domain initialization based on unique domain handler. DT specific code goes to DT specific init call.

Signed-off-by: Tomasz Nowicki tn@semihalf.com Acked-by: Marc Zyngier marc.zyngier@arm.com --- drivers/irqchip/irq-gic-v3-its-pci-msi.c | 44 +++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 15 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its-pci-msi.c b/drivers/irqchip/irq-gic-v3-its-pci-msi.c index aee60ed..d2c2496 100644 --- a/drivers/irqchip/irq-gic-v3-its-pci-msi.c +++ b/drivers/irqchip/irq-gic-v3-its-pci-msi.c @@ -106,34 +106,48 @@ static struct of_device_id its_device_id[] = { {}, };

-static int __init its_pci_msi_init(void) +static int __init its_pci_msi_init_one(struct fwnode_handle *handle, + const char *name) { - struct device_node *np; struct irq_domain *parent;

+ parent = irq_find_matching_fwnode(handle, DOMAIN_BUS_NEXUS); + if (!parent || !msi_get_domain_info(parent)) { + pr_err("%s: Unable to locate ITS domain\n", name); + return -ENXIO; + } + + if (!pci_msi_create_irq_domain(handle, &its_pci_msi_domain_info, + parent)) { + pr_err("%s: Unable to create PCI domain\n", name); + return -ENOMEM; + } + + return 0; +} + +static int __init its_pci_of_msi_init(void) +{ + struct device_node *np; + for (np = of_find_matching_node(NULL, its_device_id); np; np = of_find_matching_node(np, its_device_id)) { if (!of_property_read_bool(np, "msi-controller")) continue;

- parent = irq_find_matching_host(np, DOMAIN_BUS_NEXUS); - if (!parent || !msi_get_domain_info(parent)) { - pr_err("%s: unable to locate ITS domain\n", - np->full_name); + if (its_pci_msi_init_one(of_node_to_fwnode(np), np->full_name)) continue; - } - - if (!pci_msi_create_irq_domain(of_node_to_fwnode(np), - &its_pci_msi_domain_info, - parent)) { - pr_err("%s: unable to create PCI domain\n", - np->full_name); - continue; - }

pr_info("PCI/MSI: %s domain created\n", np->full_name); }

return 0; } + +static int __init its_pci_msi_init(void) +{ + its_pci_of_msi_init(); + + return 0; +} early_initcall(its_pci_msi_init);

IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapp...

Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers.

For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point.

Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation

IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table.

Signed-off-by: Tomasz Nowicki tn@semihalf.com Acked-by: Rafael J. Wysocki rjw@rjwysocki.net Reviewed-by: Hanjun Guo hanjun.guo@linaro.org Reviewed-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com --- drivers/acpi/Kconfig | 4 + drivers/acpi/Makefile | 2 + drivers/acpi/arm64/Kconfig | 6 ++ drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/iort.c | 216 ++++++++++++++++++++++++++++++++++++++++++++ drivers/acpi/bus.c | 2 + include/linux/acpi_iort.h | 30 ++++++ 7 files changed, 261 insertions(+) create mode 100644 drivers/acpi/arm64/Kconfig create mode 100644 drivers/acpi/arm64/Makefile create mode 100644 drivers/acpi/arm64/iort.c create mode 100644 include/linux/acpi_iort.h

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 445ce28..d5c0614 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -521,4 +521,8 @@ config ACPI_CONFIGFS userspace. The configurable ACPI groups will be visible under /config/acpi, assuming configfs is mounted under /config.

+if ARM64 +source "drivers/acpi/arm64/Kconfig" +endif + endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 5ae9d85..e5ada78 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -105,3 +105,5 @@ obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o

video-objs += acpi_video.o video_detect.o obj-y += dptf/ + +obj-$(CONFIG_ARM64) += arm64/ diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig new file mode 100644 index 0000000..4616da4 --- /dev/null +++ b/drivers/acpi/arm64/Kconfig @@ -0,0 +1,6 @@ +# +# ACPI Configuration for ARM64 +# + +config ACPI_IORT + bool diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile new file mode 100644 index 0000000..72331f2 --- /dev/null +++ b/drivers/acpi/arm64/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ACPI_IORT) += iort.o diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c new file mode 100644 index 0000000..5279a35 --- /dev/null +++ b/drivers/acpi/arm64/iort.c @@ -0,0 +1,216 @@ +/* + * Copyright (C) 2016, Semihalf + * Author: Tomasz Nowicki tn@semihalf.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * This file implements early detection/parsing of I/O mapping + * reported to OS through firmware via I/O Remapping Table (IORT) + * IORT document number: ARM DEN 0049A + */ + +#define pr_fmt(fmt) "ACPI: IORT: " fmt + +#include <linux/acpi_iort.h> +#include <linux/kernel.h> +#include <linux/pci.h> + +typedef acpi_status (*iort_find_node_callback) + (struct acpi_iort_node *node, void *context); + +/* Root pointer to the mapped IORT table */ +static struct acpi_table_header *iort_table; + +static LIST_HEAD(iort_msi_chip_list); +static DEFINE_SPINLOCK(iort_msi_chip_lock); + +static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type, + iort_find_node_callback callback, + void *context) +{ + struct acpi_iort_node *iort_node, *iort_end; + struct acpi_table_iort *iort; + int i; + + if (!iort_table) + return NULL; + + /* Get the first IORT node */ + iort = (struct acpi_table_iort *)iort_table; + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, + iort->node_offset); + iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, + iort_table->length); + + for (i = 0; i < iort->node_count; i++) { + if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND, + "IORT node pointer overflows, bad table!\n")) + return NULL; + + if (iort_node->type == type && + ACPI_SUCCESS(callback(iort_node, context))) + return iort_node; + + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, + iort_node->length); + } + + return NULL; +} + +static acpi_status iort_match_node_callback(struct acpi_iort_node *node, + void *context) +{ + struct device *dev = context; + acpi_status status; + + if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) { + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_device *adev = to_acpi_device_node(dev->fwnode); + struct acpi_iort_named_component *ncomp; + + if (!adev) { + status = AE_NOT_FOUND; + goto out; + } + + status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf); + if (ACPI_FAILURE(status)) { + dev_warn(dev, "Can't get device full path name\n"); + goto out; + } + + ncomp = (struct acpi_iort_named_component *)node->node_data; + status = !strcmp(ncomp->device_name, buf.pointer) ? + AE_OK : AE_NOT_FOUND; + acpi_os_free(buf.pointer); + } else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { + struct acpi_iort_root_complex *pci_rc; + struct pci_bus *bus; + + bus = to_pci_bus(dev); + pci_rc = (struct acpi_iort_root_complex *)node->node_data; + + /* + * It is assumed that PCI segment numbers maps one-to-one + * with root complexes. Each segment number can represent only + * one root complex. + */ + status = pci_rc->pci_segment_number == pci_domain_nr(bus) ? + AE_OK : AE_NOT_FOUND; + } else { + status = AE_NOT_FOUND; + } +out: + return status; +} + +static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in, + u32 *rid_out) +{ + /* Single mapping does not care for input id */ + if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { + if (type == ACPI_IORT_NODE_NAMED_COMPONENT || + type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { + *rid_out = map->output_base; + return 0; + } + + pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n", + map, type); + return -ENXIO; + } + + if (rid_in < map->input_base || + (rid_in >= map->input_base + map->id_count)) + return -ENXIO; + + *rid_out = map->output_base + (rid_in - map->input_base); + return 0; +} + +static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node *node, + u32 rid_in, u32 *rid_out, + u8 type) +{ + u32 rid = rid_in; + + /* Parse the ID mapping tree to find specified node type */ + while (node) { + struct acpi_iort_id_mapping *map; + int i; + + if (node->type == type) { + if (rid_out) + *rid_out = rid; + return node; + } + + if (!node->mapping_offset || !node->mapping_count) + goto fail_map; + + map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, + node->mapping_offset); + + /* Firmware bug! */ + if (!map->output_reference) { + pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", + node, node->type); + goto fail_map; + } + + /* Do the RID translation */ + for (i = 0; i < node->mapping_count; i++, map++) { + if (!iort_id_map(map, node->type, rid, &rid)) + break; + } + + if (i == node->mapping_count) + goto fail_map; + + node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, + map->output_reference); + } + +fail_map: + /* Map input RID to output RID unchanged on mapping failure*/ + if (rid_out) + *rid_out = rid_in; + + return NULL; +} + +static struct acpi_iort_node *iort_find_dev_node(struct device *dev) +{ + struct pci_bus *pbus; + + if (!dev_is_pci(dev)) + return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, + iort_match_node_callback, dev); + + /* Find a PCI root bus */ + pbus = to_pci_dev(dev)->bus; + while (!pci_is_root_bus(pbus)) + pbus = pbus->parent; + + return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, + iort_match_node_callback, &pbus->dev); +} + +void __init acpi_iort_init(void) +{ + acpi_status status; + + status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + const char *msg = acpi_format_exception(status); + pr_err("Failed to get table, %s\n", msg); + } +} diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 85b7d07..e56e643 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -36,6 +36,7 @@ #ifdef CONFIG_X86 #include <asm/mpspec.h> #endif +#include <linux/acpi_iort.h> #include <linux/pci.h> #include <acpi/apei.h> #include <linux/dmi.h> @@ -1186,6 +1187,7 @@ static int __init acpi_init(void) }

pci_mmcfg_late_init(); + acpi_iort_init(); acpi_scan_init(); acpi_ec_init(); acpi_debugfs_init(); diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h new file mode 100644 index 0000000..fcacaf7 --- /dev/null +++ b/include/linux/acpi_iort.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2016, Semihalf + * Author: Tomasz Nowicki tn@semihalf.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef __ACPI_IORT_H__ +#define __ACPI_IORT_H__ + +#include <linux/acpi.h> + +#ifdef CONFIG_ACPI_IORT +void acpi_iort_init(void); +#else +static inline void acpi_iort_init(void) { } +#endif + +#endif /* __ACPI_IORT_H__ */