Currently, the BAD_MADT_ENTRY macro is used to do a very simple sanity check on the various subtables that are defined for the MADT. The check compares the size of the subtable data structure as defined by ACPICA to the length entry in the subtable. If they are not the same, the assumption is that the subtable is incorrect.
Over time, the ACPI spec has allowed for MADT subtables where this can never be true (the local SAPIC subtable, for example). Or, more recently, the spec has accumulated some minor flaws where there are three possible sizes for a subtable, all of which are valid, but only for specific versions of the spec (the GICC subtable). In both cases, BAD_MADT_ENTRY reports these subtables as bad when they are not. In order to retain some sanity check on the MADT subtables, we now have to special case these subtables. Of necessity, these special cases have ended up in arch-dependent code (arm64) or an arch has simply decided to forgo the check (ia64).
This patch set replaces the BAD_MADT_ENTRY macro with a function called bad_madt_entry(). This function uses a data set of details about the subtables to provide more sanity checking than before:
-- is the subtable legal for the version given in the FADT?
-- is the subtable legal for the revision of the MADT in use?
-- is the subtable of the proper length (including checking on the one variable length subtable that is currently ignored), given the FADT version and the MADT revision?
Further, this patch set adds in the call to bad_madt_entry() from the acpi_table_parse_madt() function, allowing it to be used consistently by all architectures, for all subtables, and removing the need for each of the subtable traversal callback functions to use BAD_MADT_ENTRY.
In theory, as the ACPI specification changes, we would only have to add additional information to the data set describing the MADT subtables in order to continue providing sanity checks, even when new subtables are added.
These patches have been tested on an APM Mustang (arm64) and are known to work there. They have also been cross-compiled for x86 and ia64 with no known failures.
Changes for v4: -- Remove extraneous white space change (Graeme Gregory) -- acpi_parse_entries() changes also needed a check to make sure that only MADT entries used bad_madt_entry() (Sudeep Holla) -- inadvertent use of 01day build noted that bad_madt_entry() can be static, so added it (Sudeep Holla, Fengguang Wu)
Changes for v3: -- Reviewed-and-tested-by from Sudeep Holla for arm64 parts -- Clearer language in error messages (Graeme Gregory, Timur Tabi) -- Double checked that inserting call to bad_madt_entry() into the function acpi_parse_entries() does not impact current behavior (Sudeep Holla)
Changes for v2: -- Acked-by on 2/5 from Marc Zyngier and Catalin Marinas for ARM -- Correct faulty end of loop test found by Timur Tabi
Al Stone (5): ACPI: add in a bad_madt_entry() function to eventually replace the macro ACPI / ARM64: remove usage of BAD_MADT_ENTRY/BAD_MADT_GICC_ENTRY ACPI / IA64: remove usage of BAD_MADT_ENTRY ACPI / X86: remove usage of BAD_MADT_ENTRY ACPI: remove definition of BAD_MADT_ENTRY macro
arch/arm64/include/asm/acpi.h | 8 -- arch/arm64/kernel/smp.c | 2 - arch/ia64/kernel/acpi.c | 20 ---- arch/x86/kernel/acpi/boot.c | 27 ----- drivers/acpi/tables.c | 244 ++++++++++++++++++++++++++++++++++++++++++ drivers/irqchip/irq-gic.c | 6 -- include/linux/acpi.h | 4 - 7 files changed, 244 insertions(+), 67 deletions(-)
The existing BAD_MADT_ENTRY macro only checks that the size of the data structure for an MADT subtable matches the length entry in the subtable. This is, unfortunately, not reliable. Nor, as it turns out, does it have anything to do with what the length should be in any particular table.
We introduce the bad_madt_entry() function that uses a data set to do some basic sanity checks on any given MADT subtable. Over time, as the spec changes, we should just be able to add entries to the data set to reflect the changes.
What the data set captures is the allowed MADT subtable length for each type of subtable, for each revision of the specification. While there is a revision number in the MADT that we should be able to use to figure out the proper subtable length, it was not changed when subtables did. And, while there is a major and minor revision in the FADT that could also help, it was not always changed as the subtables changed either. So, the data set captures for each published version of the ACPI spec what the FADT revisions numbers should be, the corresponding MADT revision number, and the subtable types and lengths that were defined at that time.
The sanity checks done are: -- is the length non-zero? -- is the subtable type defined/allowed for the revision of the FADT we're using? -- is the subtable type defined/allowed for the revision of the MADT we're using? -- is the length entry what it should be for this revision of the MADT and FADT?
These checks are more thorough than the previous macro provided, and are now insulated from data structure size changes by ACPICA, which have been the source of other patches in the past.
Now that the bad_madt_entry() function is available, we add code to also invoke it before any subtable handlers are called to use the info in the subtable. Subsequent patches will remove the use of the BAD_MADT_ENTRY macro which is now redundant as a result. Any ACPI functions that use acpi_parse_madt_entries() will always have all of the MADT subtables checked from now on.
Signed-off-by: Al Stone al.stone@linaro.org Cc: Rafael J. Wysocki rjw@rjwysocki.net Cc: Len Brown lenb@kernel.org --- drivers/acpi/tables.c | 244 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 244 insertions(+)
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index 17a6fa0..79d73e5 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -210,6 +210,247 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) } }
+/* + * The Long, Sad, True Story of the MADT + * or + * What does bad_madt_entry() actually do? + * + * Once upon a time in ACPI 1.0, there was the MADT. It was a nice table, + * and it had two subtables all of its own. But, it was also a pretty + * busy table, too, so over time the MADT gathered up other nice little + * subtables. By the time ACPI 6.0 came around, the MADT had 16 of the + * little guys. + * + * Now, the MADT kept a little counter around for the subtables. In fact, + * it kept two counters: one was the revision level, which was supposed to + * change when new subtables came to be, or as the ones already around grew + * up. The second counter was a type number, because the MADT needed a unique + * type for each subtable so he could tell them apart. But, sometimes the + * MADT got so busy, he forgot to increment the revision level when he needed + * to. Fortunately, the type counter kept increasing since that's the only + * way the MADT could find each little subtable. It just wouldn't do to have + * every subtable called Number 6. + * + * In the next valley over, a castle full of wizards was watching the MADT + * and made a pact to keep their own counter. Every time the MADT found a + * new subtable, or a subtable grew up, the wizards promised they would + * increment their counter. Well, wizards being the forgetful sort, they + * didn't alway do that. And, since there quite a lot of them, they + * couldn't always remember who was supposed to keep track of the MADT, + * especially if dinner was coming up soon. Their counter was called the + * spec version. + * + * Every now and then, the MADT would gather up all its little subtables + * and take them in to the cobbler to get new boots. This was a very, very + * meticulous cobbler, so every time they came, he wrote down all the boot + * sizes for all of the little subtables. The cobbler would ask each subtable + * for its length, check that against his careful notes, and then go get the + * right boots. Sometimes, a little subtable would change a bit, and their + * length did not match what the cobbler had written down. If the wizards + * or the MADT had incremented their counters, the cobbler would breath a + * sigh of relief and write down the new length as the right one. But, if + * none of the counters had changed, this would make the cobbler very, very + * mad. He couldn't tell if he had the right size boots or not for the + * little subtable. He would have to *guess* and this really bugged him. + * + * Well, when the cobbler got mad like this, he would go into hiding. He + * would not make or sell any boots. He would not go out at all. Pretty + * soon, the coffee shop would have to close because the cobbler wasn't + * coming by twice a day any more. Then the grocery store would have to + * close because he wouldn't eat much. After a while, everyone would panic + * and have to move from the village and go live with all their relatives + * (usually the ones they didn't like very much). + * + * Eventually, the cobbler would work his way out of his bad mood, and + * open up his boot business again. Then, everyone else could move back + * to the village and restart their lives, too. + * + * Fortunately, we have been able to collect up all the cobbler's careful + * notes (and we wrote them down below). We'll have to keep checking these + * notes over time, too, just as the cobbler does. But, in the meantime, + * we can avoid the panic and the reboot since we can make sure that each + * subtable is doing okay. And that's what bad_madt_entry() does. + * + * + * FADT Major Version -> 1 3 4 4 5 5 6 + * FADT Minor Version -> x x x x x 1 0 + * MADT revision -> 1 1 2 3 3 3 3 + * Spec Version -> 1.0 2.0 3.0b 4.0a 5.0b 5.1a 6.0 + * Subtable Name Type Expected Length -> + * Processor Local APIC 0x0 8 8 8 8 8 8 8 + * IO APIC 0x1 12 12 12 12 12 12 12 + * Int Src Override 0x2 10 10 10 10 10 10 + * NMI Src 0x3 8 8 8 8 8 8 + * Local APIC NMI Struct 0x4 6 6 6 6 6 6 + * Local APIC Addr Ovrrd 0x5 16 12 12 12 12 12 + * IO SAPIC 0x6 20 16 16 16 16 16 + * Local SAPIC 0x7 8 >16 >16 >16 >16 >16 + * Platform Int Src 0x8 16 16 16 16 16 16 + * Proc Local x2APIC 0x9 16 16 16 16 + * Local x2APIC NMI 0xa 12 12 12 12 + * GICC CPU I/F 0xb 40 76 80 + * GICD 0xc 24 24 24 + * GICv2m MSI 0xd 24 24 + * GICR 0xe 16 16 + * GIC ITS 0xf 16 + * + * In the table, each length entry is what should be in the length + * field of the subtable, and -- in general -- it should match the + * size of the struct for the subtable. Any value that is not set + * (i.e., is zero) indicates that the subtable is not defined for + * that version of the ACPI spec. + * + */ +#define SUBTABLE_UNDEFINED 0x00 +#define SUBTABLE_VARIABLE 0xff +#define NUM_SUBTABLE_TYPES 16 + +struct acpi_madt_subtable_lengths { + unsigned short major_version; /* from revision in FADT header */ + unsigned short minor_version; /* FADT field starting with 5.1 */ + unsigned short madt_version; /* MADT revision */ + unsigned short num_types; /* types possible for this version */ + unsigned short lengths[NUM_SUBTABLE_TYPES]; + /* subtable lengths, indexed by type */ +}; + +static struct acpi_madt_subtable_lengths spec_info[] = { + { /* for ACPI 1.0 */ + .major_version = 1, + .minor_version = 0, + .madt_version = 1, + .num_types = 2, + .lengths = { 8, 12 } + }, + { /* for ACPI 2.0 */ + .major_version = 3, + .minor_version = 0, + .madt_version = 1, + .num_types = 9, + .lengths = { 8, 12, 10, 8, 6, 16, 20, 8, 16 } + }, + { /* for ACPI 3.0b */ + .major_version = 4, + .minor_version = 0, + .madt_version = 2, + .num_types = 9, + .lengths = { 8, 12, 10, 8, 6, 12, 16, SUBTABLE_VARIABLE, 16 } + }, + { /* for ACPI 4.0a */ + .major_version = 4, + .minor_version = 0, + .madt_version = 3, + .num_types = 11, + .lengths = { 8, 12, 10, 8, 6, 12, 16, SUBTABLE_VARIABLE, + 16, 16, 12 } + }, + { /* for ACPI 5.0b */ + .major_version = 5, + .minor_version = 0, + .madt_version = 3, + .num_types = 13, + .lengths = { 8, 12, 10, 8, 6, 12, 16, SUBTABLE_VARIABLE, + 16, 16, 12, 40, 24 } + }, + { /* for ACPI 5.1a */ + .major_version = 5, + .minor_version = 1, + .madt_version = 3, + .num_types = 15, + .lengths = { 8, 12, 10, 8, 6, 12, 16, SUBTABLE_VARIABLE, + 16, 16, 12, 76, 24, 24, 16 } + }, + { /* for ACPI 6.0 */ + .major_version = 6, + .minor_version = 0, + .madt_version = 3, + .num_types = 16, + .lengths = { 8, 12, 10, 8, 6, 12, 16, SUBTABLE_VARIABLE, + 16, 16, 12, 80, 24, 24, 16, 16 } + }, + { /* terminator */ + .major_version = 0, + .minor_version = 0, + .madt_version = 0, + .num_types = 0, + .lengths = { 0 } + } +}; + +static int __init bad_madt_entry(struct acpi_table_header *table, + struct acpi_subtable_header *entry) +{ + struct acpi_madt_subtable_lengths *ms; + struct acpi_table_madt *madt; + unsigned short major; + unsigned short minor; + unsigned short len; + + /* simple sanity checking on MADT subtable entries */ + if (!entry || !table) + return 1; + + /* FADT minor numbers were not introduced until ACPI 5.1 */ + major = acpi_gbl_FADT.header.revision; + if (major >= 5 && acpi_gbl_FADT.header.length >= 268) + minor = acpi_gbl_FADT.minor_revision; + else + minor = 0; + + madt = (struct acpi_table_madt *)table; + ms = spec_info; + while (ms->num_types != 0) { + if (ms->major_version == major && + ms->minor_version == minor && + ms->madt_version == madt->header.revision) + break; + ms++; + } + if (!ms->num_types) { + pr_err("undefined version for either FADT %d.%d or MADT %d\n", + major, minor, madt->header.revision); + return 1; + } + + if (entry->type >= ms->num_types) { + pr_err("undefined MADT subtable type for FADT %d.%d: %d (length %d)\n", + major, minor, entry->type, entry->length); + return 1; + } + + /* verify that the table is allowed for this version of the spec */ + len = ms->lengths[entry->type]; + if (!len) { + pr_err("MADT subtable %d not defined for FADT %d.%d\n", + entry->type, major, minor); + return 1; + } + + /* verify that the length is what we expect */ + if (len == SUBTABLE_VARIABLE) { + if (entry->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { + struct acpi_madt_local_sapic *lsapic = + (struct acpi_madt_local_sapic *)entry; + int proper_len = sizeof(struct acpi_madt_local_sapic) + + strlen(lsapic->uid_string) + 1; + + if (proper_len != entry->length) { + pr_err("Variable length MADT subtable %d is wrong length: %d, should be: %d\n", + entry->type, entry->length, proper_len); + return 1; + } + } + } else { + if (entry->length != len) { + pr_err("MADT subtable %d is wrong length: %d, should be: %d\n", + entry->type, entry->length, len); + return 1; + } + } + + return 0; +} + int __init acpi_parse_entries(char *id, unsigned long table_size, acpi_tbl_entry_handler handler, @@ -245,6 +486,9 @@ acpi_parse_entries(char *id, unsigned long table_size, table_end) { if (entry->type == entry_id && (!max_entries || count < max_entries)) { + if (!strncmp(id, ACPI_SIG_MADT, 4) && + bad_madt_entry(table_header, entry)) + return -EINVAL; if (handler(entry, table_end)) return -EINVAL;
Now that we have introduced the bad_madt_entry() function, and that function is being invoked in acpi_table_parse_madt() for us, there is no longer any need to use the BAD_MADT_ENTRY macro, or in the case of arm64, the BAD_MADT_GICC_ENTRY, too.
Signed-off-by: Al Stone al.stone@linaro.org Acked-by: Catalin Marinas catalin.marinas@arm.com Acked-by: Marc Zyngier marc.zyngier@arm.com Reviewed-and-tested-by: Sudeep Holla sudeep.holla@arm.com Cc: Will Deacon will.deacon@arm.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Jason Cooper jason@lakedaemon.net --- arch/arm64/include/asm/acpi.h | 8 -------- arch/arm64/kernel/smp.c | 2 -- drivers/irqchip/irq-gic.c | 6 ------ 3 files changed, 16 deletions(-)
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 208cec0..ed7e212 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -19,14 +19,6 @@ #include <asm/cputype.h> #include <asm/smp_plat.h>
-/* Macros for consistency checks of the GICC subtable of MADT */ -#define ACPI_MADT_GICC_LENGTH \ - (acpi_gbl_FADT.header.revision < 6 ? 76 : 80) - -#define BAD_MADT_GICC_ENTRY(entry, end) \ - (!(entry) || (unsigned long)(entry) + sizeof(*(entry)) > (end) || \ - (entry)->header.length != ACPI_MADT_GICC_LENGTH) - /* Basic configuration for ACPI */ #ifdef CONFIG_ACPI /* ACPI table mapping after acpi_gbl_permanent_mmap is set */ diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index dbdaacd..66cc8c4 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -451,8 +451,6 @@ acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header, struct acpi_madt_generic_interrupt *processor;
processor = (struct acpi_madt_generic_interrupt *)header; - if (BAD_MADT_GICC_ENTRY(processor, end)) - return -EINVAL;
acpi_table_print_madt_entry(header);
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index e6b7ed5..b3530e3 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -1189,9 +1189,6 @@ gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
processor = (struct acpi_madt_generic_interrupt *)header;
- if (BAD_MADT_GICC_ENTRY(processor, end)) - return -EINVAL; - /* * There is no support for non-banked GICv1/2 register in ACPI spec. * All CPU interface addresses have to be the same. @@ -1213,9 +1210,6 @@ gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
dist = (struct acpi_madt_generic_distributor *)header;
- if (BAD_MADT_ENTRY(dist, end)) - return -EINVAL; - dist_phy_base = dist->base_address; return 0; }
Now that we have introduced the bad_madt_entry() function, and that function is being invoked in acpi_table_parse_madt() for us, there is no longer any need to use the BAD_MADT_ENTRY macro.
Signed-off-by: Al Stone al.stone@linaro.org Cc: Tony Luck tony.luck@intel.com Cc: Fenghua Yu fenghua.yu@intel.com --- arch/ia64/kernel/acpi.c | 20 -------------------- 1 file changed, 20 deletions(-)
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index b1698bc..efa3f0a 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -184,9 +184,6 @@ acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
lapic = (struct acpi_madt_local_apic_override *)header;
- if (BAD_MADT_ENTRY(lapic, end)) - return -EINVAL; - if (lapic->address) { iounmap(ipi_base_addr); ipi_base_addr = ioremap(lapic->address, 0); @@ -201,8 +198,6 @@ acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end)
lsapic = (struct acpi_madt_local_sapic *)header;
- /*Skip BAD_MADT_ENTRY check, as lsapic size could vary */ - if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { #ifdef CONFIG_SMP smp_boot_data.cpu_phys_id[available_cpus] = @@ -222,9 +217,6 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e
lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header;
- if (BAD_MADT_ENTRY(lacpi_nmi, end)) - return -EINVAL; - /* TBD: Support lapic_nmi entries */ return 0; } @@ -236,9 +228,6 @@ acpi_parse_iosapic(struct acpi_subtable_header * header, const unsigned long end
iosapic = (struct acpi_madt_io_sapic *)header;
- if (BAD_MADT_ENTRY(iosapic, end)) - return -EINVAL; - return iosapic_init(iosapic->address, iosapic->global_irq_base); }
@@ -253,9 +242,6 @@ acpi_parse_plat_int_src(struct acpi_subtable_header * header,
plintsrc = (struct acpi_madt_interrupt_source *)header;
- if (BAD_MADT_ENTRY(plintsrc, end)) - return -EINVAL; - /* * Get vector assignment for this interrupt, set attributes, * and program the IOSAPIC routing table. @@ -336,9 +322,6 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
p = (struct acpi_madt_interrupt_override *)header;
- if (BAD_MADT_ENTRY(p, end)) - return -EINVAL; - iosapic_override_isa_irq(p->source_irq, p->global_irq, ((p->inti_flags & ACPI_MADT_POLARITY_MASK) == ACPI_MADT_POLARITY_ACTIVE_LOW) ? @@ -356,9 +339,6 @@ acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end
nmi_src = (struct acpi_madt_nmi_source *)header;
- if (BAD_MADT_ENTRY(nmi_src, end)) - return -EINVAL; - /* TBD: Support nimsrc entries */ return 0; }
Now that we have introduced the bad_madt_entry() function, and that function is being invoked in acpi_table_parse_madt() for us, there is no longer any need to use the BAD_MADT_ENTRY macro.
Signed-off-by: Al Stone al.stone@linaro.org Cc: Rafael J. Wysocki rjw@rjwysocki.net Cc: Len Brown len.brown@intel.com Cc: Pavel Machek pavel@ucw.cz Cc: Thomas Gleixner tglx@linutronix.de Cc: Ingo Molnar mingo@redhat.com Cc: H. Peter Anvin hpa@zytor.com Cc: x86@kernel.org --- arch/x86/kernel/acpi/boot.c | 27 --------------------------- 1 file changed, 27 deletions(-)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index ded848c..d37b84d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -194,9 +194,6 @@ acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
processor = (struct acpi_madt_local_x2apic *)header;
- if (BAD_MADT_ENTRY(processor, end)) - return -EINVAL; - acpi_table_print_madt_entry(header);
apic_id = processor->local_apic_id; @@ -227,9 +224,6 @@ acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
processor = (struct acpi_madt_local_apic *)header;
- if (BAD_MADT_ENTRY(processor, end)) - return -EINVAL; - acpi_table_print_madt_entry(header);
/* @@ -252,9 +246,6 @@ acpi_parse_sapic(struct acpi_subtable_header *header, const unsigned long end)
processor = (struct acpi_madt_local_sapic *)header;
- if (BAD_MADT_ENTRY(processor, end)) - return -EINVAL; - acpi_table_print_madt_entry(header);
acpi_register_lapic((processor->id << 8) | processor->eid,/* APIC ID */ @@ -271,9 +262,6 @@ acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header;
- if (BAD_MADT_ENTRY(lapic_addr_ovr, end)) - return -EINVAL; - acpi_lapic_addr = lapic_addr_ovr->address;
return 0; @@ -287,9 +275,6 @@ acpi_parse_x2apic_nmi(struct acpi_subtable_header *header,
x2apic_nmi = (struct acpi_madt_local_x2apic_nmi *)header;
- if (BAD_MADT_ENTRY(x2apic_nmi, end)) - return -EINVAL; - acpi_table_print_madt_entry(header);
if (x2apic_nmi->lint != 1) @@ -305,9 +290,6 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e
lapic_nmi = (struct acpi_madt_local_apic_nmi *)header;
- if (BAD_MADT_ENTRY(lapic_nmi, end)) - return -EINVAL; - acpi_table_print_madt_entry(header);
if (lapic_nmi->lint != 1) @@ -411,9 +393,6 @@ acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
ioapic = (struct acpi_madt_io_apic *)header;
- if (BAD_MADT_ENTRY(ioapic, end)) - return -EINVAL; - acpi_table_print_madt_entry(header);
/* Statically assign IRQ numbers for IOAPICs hosting legacy IRQs */ @@ -463,9 +442,6 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
intsrc = (struct acpi_madt_interrupt_override *)header;
- if (BAD_MADT_ENTRY(intsrc, end)) - return -EINVAL; - acpi_table_print_madt_entry(header);
if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) { @@ -504,9 +480,6 @@ acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end
nmi_src = (struct acpi_madt_nmi_source *)header;
- if (BAD_MADT_ENTRY(nmi_src, end)) - return -EINVAL; - acpi_table_print_madt_entry(header);
/* TBD: Support nimsrc entries? */
Now that we have introduced to bad_madt_entry(), and we have removed all the usages of the BAD_MADT_ENTRY macro from all of the various architectures that use it (arm64, ia64, x86), we can remove the macro definition since it is no longer used.
Signed-off-by: Al Stone al.stone@linaro.org Cc: Rafael J. Wysocki rjw@rjwysocki.net Cc: Len Brown lenb@kernel.org --- include/linux/acpi.h | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 7235c48..a6d6326 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -127,10 +127,6 @@ static inline void acpi_initrd_override(void *data, size_t size) } #endif
-#define BAD_MADT_ENTRY(entry, end) ( \ - (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ - ((struct acpi_subtable_header *)entry)->length < sizeof(*entry)) - char * __acpi_map_table (unsigned long phys_addr, unsigned long size); void __acpi_unmap_table(char *map, unsigned long size); int early_acpi_boot_init(void);
On Wednesday, September 16, 2015 05:26:40 PM Al Stone wrote:
Currently, the BAD_MADT_ENTRY macro is used to do a very simple sanity check on the various subtables that are defined for the MADT. The check compares the size of the subtable data structure as defined by ACPICA to the length entry in the subtable. If they are not the same, the assumption is that the subtable is incorrect.
Over time, the ACPI spec has allowed for MADT subtables where this can never be true (the local SAPIC subtable, for example). Or, more recently, the spec has accumulated some minor flaws where there are three possible sizes for a subtable, all of which are valid, but only for specific versions of the spec (the GICC subtable). In both cases, BAD_MADT_ENTRY reports these subtables as bad when they are not. In order to retain some sanity check on the MADT subtables, we now have to special case these subtables. Of necessity, these special cases have ended up in arch-dependent code (arm64) or an arch has simply decided to forgo the check (ia64).
This patch set replaces the BAD_MADT_ENTRY macro with a function called bad_madt_entry(). This function uses a data set of details about the subtables to provide more sanity checking than before:
-- is the subtable legal for the version given in the FADT?
-- is the subtable legal for the revision of the MADT in use?
-- is the subtable of the proper length (including checking on the one variable length subtable that is currently ignored), given the FADT version and the MADT revision?
Further, this patch set adds in the call to bad_madt_entry() from the acpi_table_parse_madt() function, allowing it to be used consistently by all architectures, for all subtables, and removing the need for each of the subtable traversal callback functions to use BAD_MADT_ENTRY.
In theory, as the ACPI specification changes, we would only have to add additional information to the data set describing the MADT subtables in order to continue providing sanity checks, even when new subtables are added.
These patches have been tested on an APM Mustang (arm64) and are known to work there. They have also been cross-compiled for x86 and ia64 with no known failures.
Changes for v4: -- Remove extraneous white space change (Graeme Gregory) -- acpi_parse_entries() changes also needed a check to make sure that only MADT entries used bad_madt_entry() (Sudeep Holla) -- inadvertent use of 01day build noted that bad_madt_entry() can be static, so added it (Sudeep Holla, Fengguang Wu)
Changes for v3: -- Reviewed-and-tested-by from Sudeep Holla for arm64 parts -- Clearer language in error messages (Graeme Gregory, Timur Tabi) -- Double checked that inserting call to bad_madt_entry() into the function acpi_parse_entries() does not impact current behavior (Sudeep Holla) Changes for v2: -- Acked-by on 2/5 from Marc Zyngier and Catalin Marinas for ARM -- Correct faulty end of loop test found by Timur Tabi
Al Stone (5): ACPI: add in a bad_madt_entry() function to eventually replace the macro ACPI / ARM64: remove usage of BAD_MADT_ENTRY/BAD_MADT_GICC_ENTRY ACPI / IA64: remove usage of BAD_MADT_ENTRY ACPI / X86: remove usage of BAD_MADT_ENTRY ACPI: remove definition of BAD_MADT_ENTRY macro
I've queued this up for v4.4, but I had to rebase it on top of some previous changes in my linux-next branch.
Can you please look at my bleeding-edge branch and see if the result of the rebase is as intended? In particular, I'm not sure if we really need to return -EINVAL from acpi_parse_entries_array() when we find a bad MADT entry or it will be sufficient to simply go to the next entry in that case?
Thanks, Rafael
On 09/25/2015 05:29 PM, Rafael J. Wysocki wrote:
On Wednesday, September 16, 2015 05:26:40 PM Al Stone wrote:
Currently, the BAD_MADT_ENTRY macro is used to do a very simple sanity check on the various subtables that are defined for the MADT. The check compares the size of the subtable data structure as defined by ACPICA to the length entry in the subtable. If they are not the same, the assumption is that the subtable is incorrect.
Over time, the ACPI spec has allowed for MADT subtables where this can never be true (the local SAPIC subtable, for example). Or, more recently, the spec has accumulated some minor flaws where there are three possible sizes for a subtable, all of which are valid, but only for specific versions of the spec (the GICC subtable). In both cases, BAD_MADT_ENTRY reports these subtables as bad when they are not. In order to retain some sanity check on the MADT subtables, we now have to special case these subtables. Of necessity, these special cases have ended up in arch-dependent code (arm64) or an arch has simply decided to forgo the check (ia64).
This patch set replaces the BAD_MADT_ENTRY macro with a function called bad_madt_entry(). This function uses a data set of details about the subtables to provide more sanity checking than before:
-- is the subtable legal for the version given in the FADT?
-- is the subtable legal for the revision of the MADT in use?
-- is the subtable of the proper length (including checking on the one variable length subtable that is currently ignored), given the FADT version and the MADT revision?
Further, this patch set adds in the call to bad_madt_entry() from the acpi_table_parse_madt() function, allowing it to be used consistently by all architectures, for all subtables, and removing the need for each of the subtable traversal callback functions to use BAD_MADT_ENTRY.
In theory, as the ACPI specification changes, we would only have to add additional information to the data set describing the MADT subtables in order to continue providing sanity checks, even when new subtables are added.
These patches have been tested on an APM Mustang (arm64) and are known to work there. They have also been cross-compiled for x86 and ia64 with no known failures.
Changes for v4: -- Remove extraneous white space change (Graeme Gregory) -- acpi_parse_entries() changes also needed a check to make sure that only MADT entries used bad_madt_entry() (Sudeep Holla) -- inadvertent use of 01day build noted that bad_madt_entry() can be static, so added it (Sudeep Holla, Fengguang Wu)
Changes for v3: -- Reviewed-and-tested-by from Sudeep Holla for arm64 parts -- Clearer language in error messages (Graeme Gregory, Timur Tabi) -- Double checked that inserting call to bad_madt_entry() into the function acpi_parse_entries() does not impact current behavior (Sudeep Holla) Changes for v2: -- Acked-by on 2/5 from Marc Zyngier and Catalin Marinas for ARM -- Correct faulty end of loop test found by Timur Tabi
Al Stone (5): ACPI: add in a bad_madt_entry() function to eventually replace the macro ACPI / ARM64: remove usage of BAD_MADT_ENTRY/BAD_MADT_GICC_ENTRY ACPI / IA64: remove usage of BAD_MADT_ENTRY ACPI / X86: remove usage of BAD_MADT_ENTRY ACPI: remove definition of BAD_MADT_ENTRY macro
I've queued this up for v4.4, but I had to rebase it on top of some previous changes in my linux-next branch.
Can you please look at my bleeding-edge branch and see if the result of the rebase is as intended? In particular, I'm not sure if we really need to return -EINVAL from acpi_parse_entries_array() when we find a bad MADT entry or it will be sufficient to simply go to the next entry in that case?
Thanks, Rafael
I see there being two options: (1) return -EINVAL and indicate that the tables are incorrect, or (2) print a warning (or something more aggressive?), go to the next entry, and hope for the best with the remainder of the MADT subtables. The former is consistent with past behavior, I think, and the latter seems to me a bit of a gamble. So, my vote is for (1), the current method; what are you thinking these days?
On Mon, Sep 28, 2015 at 10:17 PM, Al Stone ahs3@redhat.com wrote:
On 09/25/2015 05:29 PM, Rafael J. Wysocki wrote:
On Wednesday, September 16, 2015 05:26:40 PM Al Stone wrote:
[cut]
In particular, I'm not sure if we really need to return -EINVAL from acpi_parse_entries_array() when we find a bad MADT entry or it will be sufficient to simply go to the next entry in that case?
Thanks, Rafael
I see there being two options: (1) return -EINVAL and indicate that the tables are incorrect, or (2) print a warning (or something more aggressive?), go to the next entry, and hope for the best with the remainder of the MADT subtables. The former is consistent with past behavior, I think, and the latter seems to me a bit of a gamble. So, my vote is for (1), the current method; what are you thinking these days?
I would be for preserving the past behavior.
I'm a bit concerned that the new checks may trigger on systems where the old ones didn't, but that is a separete problem.
Thanks, Rafael
-
Al Stone -
Al Stone -
Rafael J. Wysocki -
Rafael J. Wysocki