From: Huang Ying ying.huang@intel.com
ACPI/APEI is designed to verifiy/report H/W errors, like Corrected Error(CE) and Uncorrected Error(UC). It contains four tables: HEST, ERST, EINJ and BERT. The first three tables have been merged for a long time, but because of lacking BIOS support for BERT, the support for BERT is pending until now. Recently on ARM 64 platform it is has been supported. So here we come.
Under normal circumstances, when a hardware error occurs, kernel will be notified via NMI, MCE or some other method, then kernel will process the error condition, report it, and recover it if possible. But sometime, the situation is so bad, so that firmware may choose to reset directly without notifying Linux kernel.
Linux kernel can use the Boot Error Record Table (BERT) to get the un-notified hardware errors that occurred in a previous boot. In this patch, the error information is reported via printk.
For more information about BERT, please refer to ACPI Specification version 6.0, section 18.3.1: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
The following log is a BERT record after system reboot because of hitting a fatal memory error: BERT: Error records from previous boot: [Hardware Error]: It has been corrected by h/w and requires no further action [Hardware Error]: event severity: corrected [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: memory error [Hardware Error]: error_status: 0x0000000000000400 [Hardware Error]: physical_address: 0xffffffffffffffff [Hardware Error]: card: 1 module: 2 bank: 3 row: 1 column: 2 bit_position: 5 [Hardware Error]: error_type: 2, single-bit ECC
[Tomasz Nowicki: Clear error status at the end of error handling] [Tony: Applied some cleanups suggested by Fu Wei] [Fu Wei: delete EXPORT_SYMBOL_GPL(bert_disable), improve the code]
Signed-off-by: Huang Ying ying.huang@intel.com Signed-off-by: Tomasz Nowicki tomasz.nowicki@linaro.org Signed-off-by: Chen, Gong gong.chen@linux.intel.com Tested-by: Jonathan (Zhixiong) Zhang zjzhang@codeaurora.org Signed-off-by: Tony Luck tony.luck@intel.com Signed-off-by: Fu Wei fu.wei@linaro.org Tested-by: Tyler Baicar tbaicar@codeaurora.org --- Changelog: v5: Drop some superfluous comments. Use the introduce of BERT in ACPI Specification instead of original one at the head of bert.c. Fix typo in apei-internal.h Simplify the introduce of bert_disable.
v4: https://lkml.org/lkml/2016/1/8/382 Fix the "#undef" bug Improve the instruction of "bert_disable", Delete the useless declaration in include/acpi/apei.h.
v3: https://lkml.org/lkml/2016/1/7/214 Merge the two patches Do some improvements according to Borislav's suggestion.
v2: https://lkml.org/lkml/2015/8/18/336 Delete EXPORT_SYMBOL_GPL(bert_disable), because "bert_disable" is only used in bert.c for now. Do some code-style cleanups.
v1: The first upstream version submitted in linux-acpi mailing list: http://www.spinics.net/lists/linux-acpi/msg57384.html
Documentation/kernel-parameters.txt | 3 + drivers/acpi/apei/Makefile | 2 +- drivers/acpi/apei/apei-internal.h | 2 +- drivers/acpi/apei/bert.c | 150 ++++++++++++++++++++++++++++++++++++ 4 files changed, 155 insertions(+), 2 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 3ea869d..acb772e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -564,6 +564,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
bootmem_debug [KNL] Enable bootmem allocator debug messages.
+ bert_disable [ACPI] + Disable BERT OS support on buggy BIOSes. + bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards) bttv.radio= Most important insmod options are available as kernel args too. diff --git a/drivers/acpi/apei/Makefile b/drivers/acpi/apei/Makefile index 5d575a9..e50573d 100644 --- a/drivers/acpi/apei/Makefile +++ b/drivers/acpi/apei/Makefile @@ -3,4 +3,4 @@ obj-$(CONFIG_ACPI_APEI_GHES) += ghes.o obj-$(CONFIG_ACPI_APEI_EINJ) += einj.o obj-$(CONFIG_ACPI_APEI_ERST_DEBUG) += erst-dbg.o
-apei-y := apei-base.o hest.o erst.o +apei-y := apei-base.o hest.o erst.o bert.o diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h index 16129c7..6e9f14c 100644 --- a/drivers/acpi/apei/apei-internal.h +++ b/drivers/acpi/apei/apei-internal.h @@ -1,6 +1,6 @@ /* * apei-internal.h - ACPI Platform Error Interface internal - * definations. + * definitions. */
#ifndef APEI_INTERNAL_H diff --git a/drivers/acpi/apei/bert.c b/drivers/acpi/apei/bert.c new file mode 100644 index 0000000..a05b5c0 --- /dev/null +++ b/drivers/acpi/apei/bert.c @@ -0,0 +1,150 @@ +/* + * APEI Boot Error Record Table (BERT) support + * + * Copyright 2011 Intel Corp. + * Author: Huang Ying ying.huang@intel.com + * + * Under normal circumstances, when a hardware error occurs, the error + * handler receives control and processes the error. This gives OSPM a + * chance to process the error condition, report it, and optionally attempt + * recovery. In some cases, the system is unable to process an error. + * For example, system firmware or a management controller may choose to + * reset the system or the system might experience an uncontrolled crash + * or reset.The boot error source is used to report unhandled errors that + * occurred in a previous boot. This mechanism is described in the BERT + * table. + * + * For more information about BERT, please refer to ACPI Specification + * version 4.0, section 17.3.1 + * + * This file is licensed under GPLv2. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/io.h> + +#include "apei-internal.h" + +#undef pr_fmt +#define pr_fmt(fmt) "BERT: " fmt + +static int bert_disable; + +static void __init bert_print_all(struct acpi_bert_region *region, + unsigned int region_len) +{ + struct acpi_hest_generic_status *estatus = + (struct acpi_hest_generic_status *)region; + int remain = region_len; + u32 estatus_len; + + if (!estatus->block_status) + return; + + while (remain > sizeof(struct acpi_bert_region)) { + if (cper_estatus_check(estatus)) { + pr_err(FW_BUG "Invalid error record.\n"); + return; + } + + estatus_len = cper_estatus_len(estatus); + if (remain < estatus_len) { + pr_err(FW_BUG "Truncated status block (length: %u).\n", + estatus_len); + return; + } + + pr_info_once("Error records from previous boot:\n"); + + cper_estatus_print(KERN_INFO HW_ERR, estatus); + + /* + * Because the boot error source is "one-time polled" type, + * clear Block Status of current Generic Error Status Block, + * once it's printed. + */ + estatus->block_status = 0; + + estatus = (void *)estatus + estatus_len; + /* No more error records. */ + if (!estatus->block_status) + return; + + remain -= estatus_len; + } +} + +static int __init setup_bert_disable(char *str) +{ + bert_disable = 1; + + return 0; +} +__setup("bert_disable", setup_bert_disable); + +static int __init bert_check_table(struct acpi_table_bert *bert_tab) +{ + if (bert_tab->header.length < sizeof(struct acpi_table_bert) || + bert_tab->region_length < sizeof(struct acpi_bert_region)) + return -EINVAL; + + return 0; +} + +static int __init bert_init(void) +{ + struct acpi_bert_region *boot_error_region; + struct acpi_table_bert *bert_tab; + unsigned int region_len; + acpi_status status; + int rc = 0; + + if (acpi_disabled) + return 0; + + if (bert_disable) { + pr_info("Boot Error Record Table support is disabled.\n"); + return 0; + } + + status = acpi_get_table(ACPI_SIG_BERT, 0, (struct acpi_table_header **)&bert_tab); + if (status == AE_NOT_FOUND) + return 0; + + if (ACPI_FAILURE(status)) { + pr_err("get table failed, %s.\n", acpi_format_exception(status)); + return -EINVAL; + } + + rc = bert_check_table(bert_tab); + if (rc) { + pr_err(FW_BUG "table invalid.\n"); + return rc; + } + + region_len = bert_tab->region_length; + if (!request_mem_region(bert_tab->address, region_len, "APEI BERT")) { + pr_err("Can't request iomem region <%016llx-%016llx>.\n", + (unsigned long long)bert_tab->address, + (unsigned long long)bert_tab->address + region_len - 1); + return -EIO; + } + + boot_error_region = ioremap_cache(bert_tab->address, region_len); + if (boot_error_region) { + bert_print_all(boot_error_region, region_len); + iounmap(boot_error_region); + } else { + rc = -ENOMEM; + } + + release_mem_region(bert_tab->address, region_len); + + return rc; +} + +late_initcall(bert_init);
Hi Borislav,
On 19 January 2016 at 17:34, fu.wei@linaro.org wrote:
From: Huang Ying ying.huang@intel.com
ACPI/APEI is designed to verifiy/report H/W errors, like Corrected Error(CE) and Uncorrected Error(UC). It contains four tables: HEST, ERST, EINJ and BERT. The first three tables have been merged for a long time, but because of lacking BIOS support for BERT, the support for BERT is pending until now. Recently on ARM 64 platform it is has been supported. So here we come.
Under normal circumstances, when a hardware error occurs, kernel will be notified via NMI, MCE or some other method, then kernel will process the error condition, report it, and recover it if possible. But sometime, the situation is so bad, so that firmware may choose to reset directly without notifying Linux kernel.
Linux kernel can use the Boot Error Record Table (BERT) to get the un-notified hardware errors that occurred in a previous boot. In this patch, the error information is reported via printk.
For more information about BERT, please refer to ACPI Specification version 6.0, section 18.3.1: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
The following log is a BERT record after system reboot because of hitting a fatal memory error: BERT: Error records from previous boot: [Hardware Error]: It has been corrected by h/w and requires no further action [Hardware Error]: event severity: corrected [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: memory error [Hardware Error]: error_status: 0x0000000000000400 [Hardware Error]: physical_address: 0xffffffffffffffff [Hardware Error]: card: 1 module: 2 bank: 3 row: 1 column: 2 bit_position: 5 [Hardware Error]: error_type: 2, single-bit ECC
[Tomasz Nowicki: Clear error status at the end of error handling] [Tony: Applied some cleanups suggested by Fu Wei] [Fu Wei: delete EXPORT_SYMBOL_GPL(bert_disable), improve the code]
Signed-off-by: Huang Ying ying.huang@intel.com Signed-off-by: Tomasz Nowicki tomasz.nowicki@linaro.org Signed-off-by: Chen, Gong gong.chen@linux.intel.com Tested-by: Jonathan (Zhixiong) Zhang zjzhang@codeaurora.org Signed-off-by: Tony Luck tony.luck@intel.com Signed-off-by: Fu Wei fu.wei@linaro.org Tested-by: Tyler Baicar tbaicar@codeaurora.org
Changelog: v5: Drop some superfluous comments. Use the introduce of BERT in ACPI Specification instead of original one at the head of bert.c. Fix typo in apei-internal.h Simplify the introduce of bert_disable.
v4: https://lkml.org/lkml/2016/1/8/382 Fix the "#undef" bug Improve the instruction of "bert_disable", Delete the useless declaration in include/acpi/apei.h.
v3: https://lkml.org/lkml/2016/1/7/214 Merge the two patches Do some improvements according to Borislav's suggestion.
v2: https://lkml.org/lkml/2015/8/18/336 Delete EXPORT_SYMBOL_GPL(bert_disable), because "bert_disable" is only used in bert.c for now. Do some code-style cleanups.
v1: The first upstream version submitted in linux-acpi mailing list: http://www.spinics.net/lists/linux-acpi/msg57384.html
Documentation/kernel-parameters.txt | 3 + drivers/acpi/apei/Makefile | 2 +- drivers/acpi/apei/apei-internal.h | 2 +- drivers/acpi/apei/bert.c | 150 ++++++++++++++++++++++++++++++++++++ 4 files changed, 155 insertions(+), 2 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 3ea869d..acb772e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -564,6 +564,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
bootmem_debug [KNL] Enable bootmem allocator debug messages.
bert_disable [ACPI]Disable BERT OS support on buggy BIOSes.bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards) bttv.radio= Most important insmod options are available as kernel args too.diff --git a/drivers/acpi/apei/Makefile b/drivers/acpi/apei/Makefile index 5d575a9..e50573d 100644 --- a/drivers/acpi/apei/Makefile +++ b/drivers/acpi/apei/Makefile @@ -3,4 +3,4 @@ obj-$(CONFIG_ACPI_APEI_GHES) += ghes.o obj-$(CONFIG_ACPI_APEI_EINJ) += einj.o obj-$(CONFIG_ACPI_APEI_ERST_DEBUG) += erst-dbg.o
-apei-y := apei-base.o hest.o erst.o +apei-y := apei-base.o hest.o erst.o bert.o diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h index 16129c7..6e9f14c 100644 --- a/drivers/acpi/apei/apei-internal.h +++ b/drivers/acpi/apei/apei-internal.h @@ -1,6 +1,6 @@ /*
- apei-internal.h - ACPI Platform Error Interface internal
- definations.
*/
- definitions.
#ifndef APEI_INTERNAL_H diff --git a/drivers/acpi/apei/bert.c b/drivers/acpi/apei/bert.c new file mode 100644 index 0000000..a05b5c0 --- /dev/null +++ b/drivers/acpi/apei/bert.c @@ -0,0 +1,150 @@ +/*
- APEI Boot Error Record Table (BERT) support
- Copyright 2011 Intel Corp.
- Author: Huang Ying ying.huang@intel.com
- Under normal circumstances, when a hardware error occurs, the error
- handler receives control and processes the error. This gives OSPM a
- chance to process the error condition, report it, and optionally attempt
- recovery. In some cases, the system is unable to process an error.
- For example, system firmware or a management controller may choose to
- reset the system or the system might experience an uncontrolled crash
- or reset.The boot error source is used to report unhandled errors that
- occurred in a previous boot. This mechanism is described in the BERT
- table.
- For more information about BERT, please refer to ACPI Specification
- version 4.0, section 17.3.1
- This file is licensed under GPLv2.
- */
+#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/io.h>
+#include "apei-internal.h"
+#undef pr_fmt +#define pr_fmt(fmt) "BERT: " fmt
+static int bert_disable;
+static void __init bert_print_all(struct acpi_bert_region *region,
unsigned int region_len)+{
struct acpi_hest_generic_status *estatus =(struct acpi_hest_generic_status *)region;int remain = region_len;u32 estatus_len;if (!estatus->block_status)return;while (remain > sizeof(struct acpi_bert_region)) {if (cper_estatus_check(estatus)) {pr_err(FW_BUG "Invalid error record.\n");return;}estatus_len = cper_estatus_len(estatus);if (remain < estatus_len) {pr_err(FW_BUG "Truncated status block (length: %u).\n",estatus_len);return;}pr_info_once("Error records from previous boot:\n");cper_estatus_print(KERN_INFO HW_ERR, estatus);/** Because the boot error source is "one-time polled" type,* clear Block Status of current Generic Error Status Block,* once it's printed.*/estatus->block_status = 0;estatus = (void *)estatus + estatus_len;/* No more error records. */if (!estatus->block_status)return;remain -= estatus_len;}+}
+static int __init setup_bert_disable(char *str) +{
bert_disable = 1;return 0;+} +__setup("bert_disable", setup_bert_disable);
+static int __init bert_check_table(struct acpi_table_bert *bert_tab) +{
if (bert_tab->header.length < sizeof(struct acpi_table_bert) ||bert_tab->region_length < sizeof(struct acpi_bert_region))return -EINVAL;return 0;+}
+static int __init bert_init(void) +{
struct acpi_bert_region *boot_error_region;struct acpi_table_bert *bert_tab;unsigned int region_len;acpi_status status;int rc = 0;if (acpi_disabled)return 0;if (bert_disable) {pr_info("Boot Error Record Table support is disabled.\n");return 0;}status = acpi_get_table(ACPI_SIG_BERT, 0, (struct acpi_table_header **)&bert_tab);if (status == AE_NOT_FOUND)return 0;if (ACPI_FAILURE(status)) {pr_err("get table failed, %s.\n", acpi_format_exception(status));return -EINVAL;}rc = bert_check_table(bert_tab);if (rc) {pr_err(FW_BUG "table invalid.\n");return rc;}
I have improved the patch following all your suggestion.
I temporary keep "FW_BUG" here, But if you still think there is not a good reason to keep this, I will drop it in my next submission :-)
Thanks for your help
region_len = bert_tab->region_length;if (!request_mem_region(bert_tab->address, region_len, "APEI BERT")) {pr_err("Can't request iomem region <%016llx-%016llx>.\n",(unsigned long long)bert_tab->address,(unsigned long long)bert_tab->address + region_len - 1);return -EIO;}boot_error_region = ioremap_cache(bert_tab->address, region_len);if (boot_error_region) {bert_print_all(boot_error_region, region_len);iounmap(boot_error_region);} else {rc = -ENOMEM;}release_mem_region(bert_tab->address, region_len);return rc;+}
+late_initcall(bert_init);
2.5.0
On Tue, Jan 19, 2016 at 05:34:02PM +0800, fu.wei@linaro.org wrote:
From: Huang Ying ying.huang@intel.com
ACPI/APEI is designed to verifiy/report H/W errors, like Corrected Error(CE) and Uncorrected Error(UC). It contains four tables: HEST, ERST, EINJ and BERT. The first three tables have been merged for a long time, but because of lacking BIOS support for BERT, the support for BERT is pending until now. Recently on ARM 64 platform it is has been supported. So here we come.
Under normal circumstances, when a hardware error occurs, kernel will be notified via NMI, MCE or some other method, then kernel will process the error condition, report it, and recover it if possible. But sometime, the situation is so bad, so that firmware may choose to reset directly without notifying Linux kernel.
Linux kernel can use the Boot Error Record Table (BERT) to get the un-notified hardware errors that occurred in a previous boot. In this patch, the error information is reported via printk.
For more information about BERT, please refer to ACPI Specification version 6.0, section 18.3.1: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
The following log is a BERT record after system reboot because of hitting a fatal memory error: BERT: Error records from previous boot: [Hardware Error]: It has been corrected by h/w and requires no further action [Hardware Error]: event severity: corrected [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: memory error [Hardware Error]: error_status: 0x0000000000000400 [Hardware Error]: physical_address: 0xffffffffffffffff [Hardware Error]: card: 1 module: 2 bank: 3 row: 1 column: 2 bit_position: 5 [Hardware Error]: error_type: 2, single-bit ECC
[Tomasz Nowicki: Clear error status at the end of error handling] [Tony: Applied some cleanups suggested by Fu Wei] [Fu Wei: delete EXPORT_SYMBOL_GPL(bert_disable), improve the code]
Signed-off-by: Huang Ying ying.huang@intel.com Signed-off-by: Tomasz Nowicki tomasz.nowicki@linaro.org Signed-off-by: Chen, Gong gong.chen@linux.intel.com Tested-by: Jonathan (Zhixiong) Zhang zjzhang@codeaurora.org Signed-off-by: Tony Luck tony.luck@intel.com Signed-off-by: Fu Wei fu.wei@linaro.org Tested-by: Tyler Baicar tbaicar@codeaurora.org
Changelog: v5: Drop some superfluous comments. Use the introduce of BERT in ACPI Specification instead of original one at the head of bert.c. Fix typo in apei-internal.h Simplify the introduce of bert_disable.
v4: https://lkml.org/lkml/2016/1/8/382 Fix the "#undef" bug Improve the instruction of "bert_disable", Delete the useless declaration in include/acpi/apei.h.
v3: https://lkml.org/lkml/2016/1/7/214 Merge the two patches Do some improvements according to Borislav's suggestion.
v2: https://lkml.org/lkml/2015/8/18/336 Delete EXPORT_SYMBOL_GPL(bert_disable), because "bert_disable" is only used in bert.c for now. Do some code-style cleanups.
v1: The first upstream version submitted in linux-acpi mailing list: http://www.spinics.net/lists/linux-acpi/msg57384.html
Documentation/kernel-parameters.txt | 3 + drivers/acpi/apei/Makefile | 2 +- drivers/acpi/apei/apei-internal.h | 2 +- drivers/acpi/apei/bert.c | 150 ++++++++++++++++++++++++++++++++++++ 4 files changed, 155 insertions(+), 2 deletions(-)
Reviewed-by: Borislav Petkov bp@suse.de
Hi Borislav,
On 19 January 2016 at 18:12, Borislav Petkov bp@alien8.de wrote:
On Tue, Jan 19, 2016 at 05:34:02PM +0800, fu.wei@linaro.org wrote:
From: Huang Ying ying.huang@intel.com
ACPI/APEI is designed to verifiy/report H/W errors, like Corrected Error(CE) and Uncorrected Error(UC). It contains four tables: HEST, ERST, EINJ and BERT. The first three tables have been merged for a long time, but because of lacking BIOS support for BERT, the support for BERT is pending until now. Recently on ARM 64 platform it is has been supported. So here we come.
Under normal circumstances, when a hardware error occurs, kernel will be notified via NMI, MCE or some other method, then kernel will process the error condition, report it, and recover it if possible. But sometime, the situation is so bad, so that firmware may choose to reset directly without notifying Linux kernel.
Linux kernel can use the Boot Error Record Table (BERT) to get the un-notified hardware errors that occurred in a previous boot. In this patch, the error information is reported via printk.
For more information about BERT, please refer to ACPI Specification version 6.0, section 18.3.1: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
The following log is a BERT record after system reboot because of hitting a fatal memory error: BERT: Error records from previous boot: [Hardware Error]: It has been corrected by h/w and requires no further action [Hardware Error]: event severity: corrected [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: memory error [Hardware Error]: error_status: 0x0000000000000400 [Hardware Error]: physical_address: 0xffffffffffffffff [Hardware Error]: card: 1 module: 2 bank: 3 row: 1 column: 2 bit_position: 5 [Hardware Error]: error_type: 2, single-bit ECC
[Tomasz Nowicki: Clear error status at the end of error handling] [Tony: Applied some cleanups suggested by Fu Wei] [Fu Wei: delete EXPORT_SYMBOL_GPL(bert_disable), improve the code]
Signed-off-by: Huang Ying ying.huang@intel.com Signed-off-by: Tomasz Nowicki tomasz.nowicki@linaro.org Signed-off-by: Chen, Gong gong.chen@linux.intel.com Tested-by: Jonathan (Zhixiong) Zhang zjzhang@codeaurora.org Signed-off-by: Tony Luck tony.luck@intel.com Signed-off-by: Fu Wei fu.wei@linaro.org Tested-by: Tyler Baicar tbaicar@codeaurora.org
Changelog: v5: Drop some superfluous comments. Use the introduce of BERT in ACPI Specification instead of original one at the head of bert.c. Fix typo in apei-internal.h Simplify the introduce of bert_disable.
v4: https://lkml.org/lkml/2016/1/8/382 Fix the "#undef" bug Improve the instruction of "bert_disable", Delete the useless declaration in include/acpi/apei.h.
v3: https://lkml.org/lkml/2016/1/7/214 Merge the two patches Do some improvements according to Borislav's suggestion.
v2: https://lkml.org/lkml/2015/8/18/336 Delete EXPORT_SYMBOL_GPL(bert_disable), because "bert_disable" is only used in bert.c for now. Do some code-style cleanups.
v1: The first upstream version submitted in linux-acpi mailing list: http://www.spinics.net/lists/linux-acpi/msg57384.html
Documentation/kernel-parameters.txt | 3 + drivers/acpi/apei/Makefile | 2 +- drivers/acpi/apei/apei-internal.h | 2 +- drivers/acpi/apei/bert.c | 150 ++++++++++++++++++++++++++++++++++++ 4 files changed, 155 insertions(+), 2 deletions(-)
Reviewed-by: Borislav Petkov bp@suse.de
Great thanks for your help :-)
-- Regards/Gruss, Boris.
ECO tip #101: Trim your mails when you reply.
-
Borislav Petkov -
Fu Wei -
fu.wei＠linaro.org