Just composite video.
Jordan Holt | CTO | SightLine Applications Inc. | Onboard Video Processing | he/him | 503 724-9727
Please note our NEW PORTLAND ADDRESS is: 5711 S Hood Ave., Suite A Portland, OR 97239
-----Original Message----- From: Dmitry Baryshkov dmitry.baryshkov@linaro.org Sent: Wednesday, January 25, 2023 9:50 AM To: Kim Steiner kim.steiner@sightlineapplications.com Cc: Jordan Holt jordan.holt@sightlineapplications.com; Paul Neuhardt paul.neuhardt@linaro.org; sightlineapplications@lists.linaro.org Subject: Re: [Sightlineapplications] Re: Project Status and Burn Report
On 25/01/2023 19:47, Kim Steiner wrote:
Hi Dmitry,
One other thought in terms of getting the hd-sdi camera to work is to try the analog out connector. It is the yellow connector on the hd-sdi camera cabling. Would you have a way to display this?
I'll check if I can find a capture device. Is it just a composite video signal or something more intelligent?
Thanks, Kim
-----Original Message----- From: Kim Steiner Sent: Tuesday, January 24, 2023 3:31 PM To: Dmitry Baryshkov dmitry.baryshkov@linaro.org Cc: Jordan Holt jordan.holt@sightlineapplications.com; Paul Neuhardt paul.neuhardt@linaro.org; sightlineapplications@lists.linaro.org Subject: RE: [Sightlineapplications] Re: Project Status and Burn Report
Resending with basically no message then this one:
Hi Dmitry,
In regards to our testing, we have seen a GPU fault crash with our custom board (with 5.15 kernel) during temp testing. On one unit, we have seen the GPU fault crash at 118F (47C) while our custom board is sitting on a desk. The output of the GPU fault crash occurs once and our application continues to run. What do you think of this output?:
[ 156.660355] msm 900000.mdss: CP | opcode error | possible opcode=0x00000000 [ 156.662139] msm 900000.mdss: [drm:a5xx_irq] *ERROR* gpu fault ring 0 fence 5e47 status 800001C1 rb 1820/17e6 ib1 0000000003C1B000/0000 ib2 0000000001483000/0000 [ 156.666297] msm 900000.mdss: [drm:recover_worker] *ERROR* A530: hangcheck recover! [ 156.680832] msm 900000.mdss: [drm:recover_worker] *ERROR* A530: offending task: VTNext_ARM:sq0 (./VTNext_ARM64_Release.out -FULL) [ 156.699196] revision: 530 (5.3.0.2) [ 156.699341] msm 900000.mdss: [drm:a5xx_irq] *ERROR* gpu fault ring 0 fence 5e47 status 800001C1 rb 1820/17e6 ib1 0000000003C1B000/0000 ib2 0000000001483000/0000 [ 156.699833] rb 0: fence: 24134/24135 [ 156.717750] rptr: 6081 [ 156.721300] rb wptr: 6118 [ 156.724047] rb 1: fence: 0/0 [ 156.726786] rptr: 0 [ 156.729795] rb wptr: 0 [ 156.732207] rb 2: fence: 0/0 [ 156.734670] rptr: 0 [ 156.737779] rb wptr: 0 [ 156.740191] rb 3: fence: 0/0 [ 156.742649] rptr: 0 [ 156.745768] rb wptr: 0 [ 156.748186] CP_SCRATCH_REG0: 0 [ 156.750641] CP_SCRATCH_REG1: 0 [ 156.753762] CP_SCRATCH_REG2: 24134 [ 156.756812] CP_SCRATCH_REG3: 0 [ 156.760169] CP_SCRATCH_REG4: 0 [ 156.763222] CP_SCRATCH_REG5: 0 [ 156.766262] CP_SCRATCH_REG6: 0 [ 156.769300] CP_SCRATCH_REG7: 0 [ 156.773675] msm 900000.mdss: [drm:recover_worker] *ERROR* A530: hangcheck recover!
Thanks, Kim
-- With best wishes Dmitry