On 06/04/2023 21:51, Kim Steiner wrote:
Hi Dmitry,
This is the parameter file from the board that is having issues. You can copy it to the /home/slroot/sl/bin folder on your 4000. It is a single cam0 configured as a testpattern 1080p image.
Ack, thanks
Can you try the link again? I changed permissions.
Yes, it works now.
Thanks, Kim
-----Original Message----- From: Dmitry Baryshkov dmitry.baryshkov@linaro.org Sent: Thursday, April 6, 2023 11:31 AM To: Kim Steiner kim.steiner@sightlineapplications.com Cc: Jordan Holt jordan.holt@sightlineapplications.com; Paul Neuhardt paul.neuhardt@linaro.org; sightlineapplications@lists.linaro.org Subject: Re: Low temperature GPU hang testing
On 06/04/2023 20:56, Kim Steiner wrote:
Hi Dmitry,
With the latest patch for 5.15, both boards that didn't boot up now boot, but one of the two boards crashes when we run our software. Attached is the dmesg log.
This is interesting. I also noticed the following:
[ 44.186437] qcom-camss a34000.camss: Failed to add VFE#0 to power domain [ 44.186515] qcom-camss a34000.camss: Failed to power up pipeline: -22 [ 44.189179] qcom-camss a34000.camss: Failed to add VFE#0 to power domain [ 44.199654] qcom-camss a34000.camss: Failed to power up pipeline: -22
So, some parts of the board might be underpowered.
I will take a look, what can be causing this issue or how can we cope with that. In the mean time, could you please describe, which camera is enabled on this board?
With the latest patch for 5.15, we observe that the CPU functions (Analyze) is a little slower. We also observe that power usage has increased between 4.14 and 5.15: https://docs.google.com/document/d/1UD6FofrJKZ_9W7rGWTkN-DyoVI9KXQxktE XY6eYpeUU/edit#bookmark=id.y65dtcn7w11x
I don't have access to this document.
Thanks, Kim
-----Original Message----- From: Dmitry Baryshkov dmitry.baryshkov@linaro.org Sent: Wednesday, April 5, 2023 10:57 AM To: Kim Steiner kim.steiner@sightlineapplications.com Cc: Jordan Holt jordan.holt@sightlineapplications.com; Paul Neuhardt paul.neuhardt@linaro.org; sightlineapplications@lists.linaro.org Subject: Re: Low temperature GPU hang testing
Hi Kim,
On 05/04/2023 17:08, Kim Steiner wrote:
Hi Dmitry,
This was two weeks ago when I ran this, but I do not think so. Although we didn’t do any temp test in our freezer (room temp only), because we didn’t hear back from you on if this was correct. Should we?
I think you should create a single patch for us to test because the last patch you sent us did not compile, so I’m wondering if the correct patch was sent to us. In that patch, this line didn’t compile: dev_info(gpu: "GPU setting to %ld\n", *freq);
Please give a series of tests to the attached patch. I'm interested in:
- speed bins for the boards that crashed when you tested the previous version, check the following line in the dmesg:
[ 4.105174] adreno b00000.gpu: Detected speed bin 0
checking that GPU performance matches the expectations.
checking that the boards are stable in normal conditions and in the fridge test.
Thank you for your testing!
-- With best wishes Dmitry
-- With best wishes Dmitry