Linaro-acpi

linaro-acpi@lists.linaro.org

820 discussions

[PATCH v14 0/4] Watchdog: introduce ARM SBSA watchdog driver

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Introduce Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt for FDT info of SBSA Generic Watchdog, and give two examples of adding SBSA Generic Watchdog device node into the dts files: foundation-v8.dts and amd-seattle-soc.dtsi. (2)Introduce ARM SBSA watchdog driver: a.Use linux kernel watchdog framework; b.Work with FDT on ARM64; c.Support getting timeout from parameter and FDT at the driver init stage. d.The driver works in two modes: (1) single stage timeout (ignore WS0 interrupt) (2) two stages timeout (register WS0 interrupt, do panic in routine) e.User can config working mode by module parameter "action". This patchset has been tested with watchdog daemon (ACPI/FDT, module/build-in) on the following platforms: (1)ARM Foundation v8 model (2)AMD Seattle platform This patchset has been tested with kdump successfully. Changelog: v14:Fix a bug of registering interrupt routine: do a ping before registering interrupt routine, in case where is a pending interrupt. Reorder the initialization code to postpone registering interrupt routine. Improve some code style: (1)add some macro of string (2)use watchdog_get_drvdata instead of to_sbsa_gwdt, delete to_sbsa_gwdt. v13:https://lkml.org/lkml/2016/2/16/713 Fix a dev_warn message typo"signle"-->"single" Add MODULE_ALIAS Add more *ed-by in commit message. v12:https://lkml.org/lkml/2016/2/16/154 Fix a dev_warn message typo"fall"--"falling" Remove unnecessary "status" in dts Add more *ed-by in commit message. v11:https://lkml.org/lkml/2016/2/9/577 Merge patch 4 and 5. Improve some comments. The driver works in two modes, it's configured by "action"(instead of panic_enabled). Improve the initialization of the timeout limits. Feeding dog by writing "0" to WRR. v10:https://lkml.org/lkml/2016/2/3/817 Delete pretimeout support. Separate the driver to two parts: (1) single stage timeout driver(ignore WS0 interrupt); (2) register WS0 interrupt for the half timeout panic. timeout == (enable --> WS1). v9: https://lkml.org/lkml/2015/11/9/57 Rebase to latest kernel version(4.3). Update the Documentation of sbsa-gwdt device node info of FDT: (1) move some introduction to pretimeout patch (2) delete WS1 value from "interrupts" of binding documentation, since WS1 won't be handled by Linux. v8: https://lkml.org/lkml/2015/10/27/466 Rebase to latest kernel version(4.3-rc7). Separate the patches of GTDT support and arm_arch_timer. This clocksource relevant patch will upstreamed in a individual patchset. Update all the default timeout and pretimeout to 30s and 60s. Improve documentation and inline comments. Fix a bug in pretimeout support which makes timeout and pretimeout parameters initialization fail. v7: https://lkml.org/lkml/2015/8/24/611 Rebase to latest kernel version(4.2-rc7). Improve FDT support: geting resource by order, instead of name. According to the FDT support, Update the example dts file, gtdt.c and sbsa_gwdt.c. Pass the sparse test, and fix the warning. Fix the max_pretimeout and max_timeout value overflow bug. Delete the WCV output value. v6: https://lkml.org/lkml/2015/6/23/359 Improve the dtb example files: reduce the register frame size to 4K. Improve pretimeout support: (1) improve watchdog_init_timeouts function (2) rename watchdog_check_min_max_timeouts back to the original name (1) improve watchdog_timeout_invalid/watchdog_pretimeout_invalid Add the new features in the sbsa_gwdt driver: (1) In the second stage, user can feed the dog without cleaning WS0. (2) In the second stage, user can trigger WS1 by setting pretimeout = 0. (3) expand the max value of pretimeout, in case 10 second is not enough for a kdump kernel reboot in panic. v5: https://lkml.org/lkml/2015/6/10/357 Improve pretimeout support: (1)fix typo in documentation and comments. (2)fix the timeout limits validation bug. Simplify sbsa_gwdt driver: (1)integrate all the registers access functions into caller. v4: https://lkml.org/lkml/2015/6/2/4 Refactor GTDT support code: remove it from arch/arm64/kernel/acpi.c, put it into drivers/acpi/gtdt.c file. Integrate the GTDT code of drivers/clocksource/arm_arch_timer.c into drivers/acpi/gtdt.c. Improve pretimeout support, fix "pretimeout == 0" problem. Simplify sbsa_gwdt driver: (1)timeout/pretimeout limits setup; (2)keepalive function; (3)delete "clk == 0" check; (4)delete WS0 status bit check in interrupt routine; (5)sbsa_gwdt_set_wcv function. v3: https://lkml.org/lkml/2015/5/25/111 Delete "export arch_timer_get_rate" patch. Driver back to use arch_timer_get_cntfrq. Improve watchdog_init_timeouts function and update relevant documentation. Improve watchdog_timeout_invalid and watchdog_pretimeout_invalid. Improve foundation-v8.dts: delete the unnecessary tag of device node. Remove "ARM64 || COMPILE_TEST" from Kconfig. Add comments in arch/arm64/kernel/acpi.c Fix typoes and incorrect comments. v2: https://lkml.org/lkml/2015/5/21/172 Improve watchdog-kernel-api.txt documentation for pretimeout support. Export "arch_timer_get_rate" in arm_arch_timer.c. Add watchdog_init_timeouts API for pretimeout support in framework. Improve suspend and resume foundation in driver Improve timeout/pretimeout values init code in driver. Delete unnecessary items of the sbsa_gwdt struct and #define. Delete all unnecessary debug info in driver. Fix 64bit division bug. Use the arch_timer interface to get watchdog clock rate. Add MODULE_DEVICE_TABLE for platform device id. Fix typoes. v1: https://lkml.org/lkml/2015/5/15/279 The first version upstream patchset to linux mailing list. Fu Wei (4): Documentation: add sbsa-gwdt driver documentation ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi Watchdog: introduce ARM SBSA watchdog driver .../devicetree/bindings/watchdog/sbsa-gwdt.txt | 31 ++ Documentation/watchdog/watchdog-parameters.txt | 7 + arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 8 + arch/arm64/boot/dts/arm/foundation-v8.dts | 7 + drivers/watchdog/Kconfig | 20 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sbsa_gwdt.c | 408 +++++++++++++++++++++ 7 files changed, 482 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt create mode 100644 drivers/watchdog/sbsa_gwdt.c -- 2.5.0

8 years, 2 months

leg-kernel tag leg-20160328.0 released

by Graeme Gregory

The leg-kernel release has been made and tagged as leg-20160328.0 This is based on mainline kernel v4.6-rc1 Repository : http://git.linaro.org/leg/acpi/leg-kernel.git Direct Link: http://git.linaro.org/leg/acpi/leg-kernel.git/commit/d5c925dfbf42d7cd6e2282… Topic Branches :- http://git.linaro.org/leg/acpi/acpi.git - topic-pci [topic-pci-20160328.0] - topic-acpi-console [topic-acpi-console-20160328.0] - topic-gtdt-wakeup-timer [topic-gtdt-wakeup-timer-20160328.0] - topic-fvp [topic-fvp-20160328.0] - topic-kvm-acpi [topic-kvm-acpi-20160328.0] - topic-apei [topic-apei-20160328.0] http://git.linaro.org/leg/acpi/leg-kernel.git - leg-configs [leg-configs-20160216.0] NOTES:-

8 years, 2 months

[PATCH v7] acpi, apei, arm64: APEI initial support for aarch64.

by fu.wei＠linaro.org

From: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> This commit provides APEI arch-specific bits for aarch64 Meanwhile, (1)add a new subfunction "hest_ia32_init" for "acpi_disable_cmcff" which is used by IA-32 Architecture Corrected Machine Check (CMC). (2)move HEST type (ACPI_HEST_TYPE_IA32_CORRECTED_CHECK) checking to a generic place. Signed-off-by: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> Tested-by: Jonathan (Zhixiong) Zhang <zjzhang(a)codeaurora.org> Signed-off-by: Fu Wei <fu.wei(a)linaro.org> Acked-by: Hanjun Guo <hanjun.guo(a)linaro.org> Tested-by: Tyler Baicar <tbaicar(a)codeaurora.org> --- Changelog: v7: Add comment for arch_apei_flush_tlb_one in arch/arm64/include/asm/acpi.h v6: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006644.html Move HEST type (ACPI_HEST_TYPE_IA32_CORRECTED_CHECK) checking to a generic place. Delete HAVE_ACPI_APEI_HEST_IA32. v5: https://lkml.org/lkml/2015/12/10/131 Add "HAVE_ACPI_APEI_HEST_IA32" instead of "#if defined(__i386__) || defined(__x86_64__)". v4: https://lkml.org/lkml/2015/12/8/188 Rebase to latest kernel version(4.4-rc4). Move arch_apei_flush_tlb_one into header file as a inline function Add a new subfunction "hest_ia_init" for "acpi_disable_cmcff". v3: https://lkml.org/lkml/2015/12/3/521 Remove "acpi_disable_cmcff" from arm64 code, and wrap it in hest.c by "#if defined(__i386__) || defined(__x86_64__)" v2: https://lkml.org/lkml/2015/12/2/432 Rebase to latest kernel version(4.4-rc3). Move arch_apei_flush_tlb_one() to arch/arm64/kernel/acpi.c v1: https://lkml.org/lkml/2015/8/14/199 Move arch_apei_flush_tlb_one() to arch/arm64/include/asm/apci.h. Delete arch/arm64/kernel/apei.c. Add "#ifdef CONFIG_ACPI_APEI" for "acpi_disable_cmcff". arch/arm64/Kconfig | 1 + arch/arm64/include/asm/acpi.h | 15 ++++++++++++++- arch/x86/kernel/acpi/apei.c | 3 --- drivers/acpi/apei/hest.c | 18 +++++++++++++++--- 4 files changed, 30 insertions(+), 7 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index b3f2522..0260b4c 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -3,6 +3,7 @@ config ARM64 select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI + select HAVE_ACPI_APEI if ACPI select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_ELF_RANDOMIZE diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index caafd63..077a87d 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -17,6 +17,7 @@ #include <asm/cputype.h> #include <asm/smp_plat.h> +#include <asm/tlbflush.h> /* Macros for consistency checks of the GICC subtable of MADT */ #define ACPI_MADT_GICC_LENGTH \ @@ -93,7 +94,19 @@ static inline const char *acpi_get_enable_method(int cpu) } #ifdef CONFIG_ACPI_APEI +#define acpi_disable_cmcff 1 pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr); -#endif +/* + * This inline function is used in IRQ context (by GHES driver now), + * see ghes_iounmap_irq and ghes_iounmap_nmi in drivers/acpi/apei/ghes.c. + * The page mapped is reserved for firmware in kernel. This invalidate TLB + * maintenance should be broadcasted safely to make sure that all the cores + * will do TLB invalidation, then get the right pages. + */ +static inline void arch_apei_flush_tlb_one(unsigned long addr) +{ + flush_tlb_kernel_range(addr, addr + PAGE_SIZE); +} +#endif /* CONFIG_ACPI_APEI */ #endif /*_ASM_ACPI_H*/ diff --git a/arch/x86/kernel/acpi/apei.c b/arch/x86/kernel/acpi/apei.c index c280df6..ea3046e 100644 --- a/arch/x86/kernel/acpi/apei.c +++ b/arch/x86/kernel/acpi/apei.c @@ -24,9 +24,6 @@ int arch_apei_enable_cmcff(struct acpi_hest_header *hest_hdr, void *data) struct acpi_hest_ia_corrected *cmc; struct acpi_hest_ia_error_bank *mc_bank; - if (hest_hdr->type != ACPI_HEST_TYPE_IA32_CORRECTED_CHECK) - return 0; - cmc = (struct acpi_hest_ia_corrected *)hest_hdr; if (!cmc->enabled) return 0; diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 20b3fcf..792a0d9 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -123,7 +123,18 @@ EXPORT_SYMBOL_GPL(apei_hest_parse); */ static int __init hest_parse_cmc(struct acpi_hest_header *hest_hdr, void *data) { - return arch_apei_enable_cmcff(hest_hdr, data); + if (hest_hdr->type != ACPI_HEST_TYPE_IA32_CORRECTED_CHECK) + return 0; + + if (!acpi_disable_cmcff) + return !arch_apei_enable_cmcff(hest_hdr, data); + + return 0; +} + +static inline int __init hest_ia32_init(void) +{ + return apei_hest_parse(hest_parse_cmc, NULL); } struct ghes_arr { @@ -232,8 +243,9 @@ void __init acpi_hest_init(void) goto err; } - if (!acpi_disable_cmcff) - apei_hest_parse(hest_parse_cmc, NULL); + rc = hest_ia32_init(); + if (rc) + goto err; if (!ghes_disable) { rc = apei_hest_parse(hest_parse_ghes_count, &ghes_count); -- 2.5.0

8 years, 3 months

[RESEND PATCH v2] ARM64: ACPI: Update documentation for latest specification version

by Al Stone

The ACPI 6.1 specification was recently released at the end of January 2016, but the arm64 kernel documentation for the use of ACPI was written for the 5.1 version of the spec. There were significant additions to the spec that had not yet been mentioned -- for example, the 6.0 mechanisms added to make it easier to define processors and low power idle states, as well as the 6.1 addition allowing regular interrupts (not just from GPIO) be used to signal ACPI general purpose events. This patch reflects going back through and examining the specs in detail and updating content appropriately. Whilst there, a few odds and ends of typos were caught as well. This brings the documentation up to date with ACPI 6.1 for arm64. RESEND: -- Corrected From: header and added missing Cc's Changes for v2: -- Clean up white space (Harb Abdulhahmid) -- Clarification on _CCA usage (Harb Abdulhamid) -- IORT moved to required from recommended (Hanjun Guo) -- Clarify IORT description (Hanjun Guo) Signed-off-by: Al Stone <al.stone(a)linaro.org> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Will Deacon <will.deacon(a)arm.com> Cc: Jonathan Corbet <corbet(a)lwn.net> --- Documentation/arm64/acpi_object_usage.txt | 445 ++++++++++++++++++++++-------- Documentation/arm64/arm-acpi.txt | 28 +- 2 files changed, 356 insertions(+), 117 deletions(-) diff --git a/Documentation/arm64/acpi_object_usage.txt b/Documentation/arm64/acpi_object_usage.txt index a6e1a18..29bc1a1 100644 --- a/Documentation/arm64/acpi_object_usage.txt +++ b/Documentation/arm64/acpi_object_usage.txt @@ -11,15 +11,16 @@ outside of the UEFI Forum (see Section 5.2.6 of the specification). For ACPI on arm64, tables also fall into the following categories: - -- Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT + -- Required: DSDT, FADT, GTDT, IORT, MADT, MCFG, RSDP, SPCR, XSDT - -- Recommended: BERT, EINJ, ERST, HEST, SSDT + -- Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT - -- Optional: BGRT, CPEP, CSRT, DRTM, ECDT, FACS, FPDT, MCHI, MPST, - MSCT, RASF, SBST, SLIT, SPMI, SRAT, TCPA, TPM2, UEFI + -- Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, MCHI, + MPST, MSCT, NFIT, PMTT, RASF, SBST, SLIT, SPMI, SRAT, STAO, TCPA, + TPM2, UEFI, XENV - -- Not supported: BOOT, DBG2, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, - LPIT, MSDM, RSDT, SLIC, WAET, WDAT, WDRT, WPBT + -- Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT, + MSDM, OEMx, PSDT, RSDT, SLIC, WAET, WDAT, WDRT, WPBT Table Usage for ARMv8 Linux @@ -50,7 +51,8 @@ CSRT Signature Reserved (signature == "CSRT") DBG2 Signature Reserved (signature == "DBG2") == DeBuG port table 2 == - Microsoft only table, will not be supported. + License has changed and should be usable. Optional if used instead + of earlycon=<device> on the command line. DBGP Signature Reserved (signature == "DBGP") == DeBuG Port table == @@ -133,10 +135,11 @@ GTDT Section 5.2.24 (signature == "GTDT") HEST Section 18.3.2 (signature == "HEST") == Hardware Error Source Table == - Until further error source types are defined, use only types 6 (AER - Root Port), 7 (AER Endpoint), 8 (AER Bridge), or 9 (Generic Hardware - Error Source). Firmware first error handling is possible if and only - if Trusted Firmware is being used on arm64. + ARM-specific error sources have been defined; please use those or the + PCI types such as type 6 (AER Root Port), 7 (AER Endpoint), or 8 (AER + Bridge), or use type 9 (Generic Hardware Error Source). Firmware first + error handling is possible if and only if Trusted Firmware is being + used on arm64. Must be supplied if RAS support is provided by the platform. It is recommended this table be supplied. @@ -149,20 +152,27 @@ IBFT Signature Reserved (signature == "IBFT") == iSCSI Boot Firmware Table == Microsoft defined table, support TBD. +IORT Signature Reserved (signature == "IORT") + == Input Output Remapping Table == + arm64 only table, required in order to describe IO topology, SMMUs, + and GIC ITSs, and how those various components are connected together, + such as identifying which components are behind which SMMUs/ITSs. + IVRS Signature Reserved (signature == "IVRS") == I/O Virtualization Reporting Structure == x86_64 (AMD) only table, will not be supported. LPIT Signature Reserved (signature == "LPIT") == Low Power Idle Table == - x86 only table as of ACPI 5.1; future versions have been adapted for - use with ARM and will be recommended in order to support ACPI power - management. + x86 only table as of ACPI 5.1; starting with ACPI 6.0, processor + descriptions and power states on ARM platforms should use the DSDT + and define processor container devices (_HID ACPI0010, Section 8.4, + and more specifically 8.4.3 and and 8.4.4). MADT Section 5.2.12 (signature == "APIC") == Multiple APIC Description Table == Required for arm64. Only the GIC interrupt controller structures - should be used (types 0xA - 0xE). + should be used (types 0xA - 0xF). MCFG Signature Reserved (signature == "MCFG") == Memory-mapped ConFiGuration space == @@ -176,14 +186,38 @@ MPST Section 5.2.21 (signature == "MPST") == Memory Power State Table == Optional, not currently supported. +MSCT Section 5.2.19 (signature == "MSCT") + == Maximum System Characteristic Table == + Optional, not currently supported. + MSDM Signature Reserved (signature == "MSDM") == Microsoft Data Management table == Microsoft only table, will not be supported. -MSCT Section 5.2.19 (signature == "MSCT") - == Maximum System Characteristic Table == +NFIT Section 5.2.25 (signature == "NFIT") + == NVDIMM Firmware Interface Table == Optional, not currently supported. +OEMx Signature of "OEMx" only + == OEM Specific Tables == + All tables starting with a signature of "OEM" are reserved for OEM + use. Since these are not meant to be of general use but are limited + to very specific end users, they are not recommended for use and are + not supported by the kernel for arm64. + +PCCT Section 14.1 (signature == "PCCT) + == Platform Communications Channel Table == + Recommend for use on arm64, and required when using CPPC to control + power on the platform. + +PMTT Section 5.2.21.12 (signature == "PMTT") + == Platform Memory Topology Table == + Optional, but useful, but not currently supported. + +PSDT Section 5.2.11.3 (signature == "PSDT") + == Persistent System Description Table == + Obsolete table, will not be supported. + RASF Section 5.2.20 (signature == "RASF") == RAS Feature table == Optional, not currently supported. @@ -195,7 +229,7 @@ RSDP Section 5.2.5 (signature == "RSD PTR") RSDT Section 5.2.7 (signature == "RSDT") == Root System Description Table == Since this table can only provide 32-bit addresses, it is deprecated - on arm64, and will not be used. + on arm64, and will not be used. If provided, it will be ignored. SBST Section 5.2.14 (signature == "SBST") == Smart Battery Subsystem Table == @@ -207,7 +241,7 @@ SLIC Signature Reserved (signature == "SLIC") SLIT Section 5.2.17 (signature == "SLIT") == System Locality distance Information Table == - Optional in general, but required for NUMA systems. + Optional in general, but required for arm64 NUMA systems. SPCR Signature Reserved (signature == "SPCR") == Serial Port Console Redirection table == @@ -220,7 +254,7 @@ SPMI Signature Reserved (signature == "SPMI") SRAT Section 5.2.16 (signature == "SRAT") == System Resource Affinity Table == Optional, but if used, only the GICC Affinity structures are read. - To support NUMA, this table is required. + To support arm64 NUMA, this table is required. SSDT Section 5.2.11.2 (signature == "SSDT") == Secondary System Description Table == @@ -235,6 +269,11 @@ SSDT Section 5.2.11.2 (signature == "SSDT") These tables are optional, however. ACPI tables should contain only one DSDT but can contain many SSDTs. +STAO Signature Reserved (signature == "STAO") + == _STA Override table == + Optional, but only necessary in virtualized environments in order to + hide devices from guest OSs. + TCPA Signature Reserved (signature == "TCPA") == Trusted Computing Platform Alliance table == Optional, not currently supported, and may need changes to fully @@ -266,6 +305,10 @@ WPBT Signature Reserved (signature == "WPBT") == Windows Platform Binary Table == Microsoft only table, will not be supported. +XENV Signature Reserved (signature == "XENV") + == Xen project table == + Optional, used only by Xen at present. + XSDT Section 5.2.8 (signature == "XSDT") == eXtended System Description Table == Required for arm64. @@ -273,31 +316,57 @@ XSDT Section 5.2.8 (signature == "XSDT") ACPI Objects ------------ -The expectations on individual ACPI objects are discussed in the list that -follows: +The expectations on individual ACPI objects that are likely to be used are +shown in the list that follows: Name Section Usage for ARMv8 Linux ---- ------------ ------------------------------------------------- +_ACx 11.4.1 Use as needed. + _ADR 6.1.1 Use as needed. +_ALx 11.4.2 Use as needed. + +_ART 11.4.3 Use as needed. + _BBN 6.5.5 Use as needed; PCI-specific. -_BDN 6.5.3 Optional; not likely to be used on arm64. +_CCA 6.2.17 This method must be defined for all bus masters + on arm64 -- there are no assumptions made about + whether such devices are cache coherent or not. + The _CCA value is inherited by all descendants of + these devices so it does not need to be repeated. + Without _CCA on arm64, the kernel does not know what + to do about setting up DMA for the device. -_CCA 6.2.17 This method should be defined for all bus masters - on arm64. While cache coherency is assumed, making - it explicit ensures the kernel will set up DMA as - it should. + NB: this method provides default cache coherency + attributes; the presence of an SMMU can be used to + modify that, however. For example, a master could + default to non-coherent, but be made coherent with + the appropriate SMMU configuration (see Table 17 of + the IORT specification, ARM Document DEN 0049B). -_CDM 6.2.1 Optional, to be used only for processor devices. +_CDM 6.2.1 Use as needed, to be used only for processor devices. -_CID 6.1.2 Use as needed. +_CID 6.1.2 Use as needed, see also _HID. -_CLS 6.1.3 Use as needed. +_CLS 6.1.3 Use as needed, see also _HID. + +_CPC 8.4.7.1 Use as needed; power management specific. CPPC is + recommended on arm64. + +_CR3 11.4.5 Use as needed. _CRS 6.2.2 Required on arm64. -_DCK 6.5.2 Optional; not likely to be used on arm64. +_CRT 11.4.4 Use as needed. + +_CSD 8.4.2.2 Use as needed, used only in conjuction with _CST. + +_CST 8.4.2.1 Low power idle states (8.4.4) are recommended instead + of C-states. + +_CWS 9.18.6 Use as needed. _DDN 6.1.4 This field can be used for a device name. However, it is meant for DOS device names (e.g., COM1), so be @@ -305,11 +374,11 @@ _DDN 6.1.4 This field can be used for a device name. However, _DEP 6.5.8 Use as needed. -_DIS 6.2.3 Optional, for power management use. +_DIS 6.2.3 Use as needed, for power management use. -_DLM 5.7.5 Optional. +_DLM 5.7.5 Use as needed. -_DMA 6.2.4 Optional. +_DMA 6.2.4 Use as needed. _DSD 6.2.5 To be used with caution. If this object is used, try to use it within the constraints already defined by the @@ -325,19 +394,29 @@ _DSD 6.2.5 To be used with caution. If this object is used, try with the UEFI Forum; this may cause some iteration as more than one OS will be registering entries. -_DSM Do not use this method. It is not standardized, the +_DSM 9.1.1 Do not use this method. It is not standardized, the return values are not well documented, and it is currently a frequent source of error. -_DSW 7.2.1 Use as needed; power management specific. +_DSW 7.3.1 Use as needed; power management specific. -_EDL 6.3.1 Optional. +_DTI 11.4.6 Use as needed. -_EJD 6.3.2 Optional. +_EDL 6.3.1 Use as needed. -_EJx 6.3.3 Optional. +_EJD 6.3.2 Use as needed. -_FIX 6.2.7 x86 specific, not used on arm64. +_EJx 6.3.3 Use as needed. + +_FIF 11.3.1.1 Use as needed. + +_FPS 11.3.1.2 Use as needed. + +_FSL 11.3.1.3 Use as needed. + +_FST 11.3.1.4 Use as needed. + +_GCP 9.18.2 Use as needed. \_GL 5.7.1 This object is not to be used in hardware reduced mode, and therefore should not be used on arm64. @@ -349,35 +428,57 @@ _GLK 6.5.7 This object requires a global lock be defined; there \_GPE 5.3.1 This namespace is for x86 use only. Do not use it on arm64. -_GSB 6.2.7 Optional. +_GRT 9.18.3 Use as needed. + +_GSB 6.2.7 Use as needed. + +_GTF 9.9.1.1 Use as needed. + +_GWS 9.18.5 Use as needed. _HID 6.1.5 Use as needed. This is the primary object to use in device probing, though _CID and _CLS may also be used. -_HPP 6.2.8 Optional, PCI specific. +_HOT 11.4.7 Use as needed. + +_HPP 6.2.8 Use as needed, PCI specific. -_HPX 6.2.9 Optional, PCI specific. +_HPX 6.2.9 Use as needed, PCI specific. -_HRV 6.1.6 Optional, use as needed to clarify device behavior; in - some cases, this may be easier to use than _DSD. +_HRV 6.1.6 Use as needed, use as needed to clarify device + behavior; in some cases, this may be easier to use + than _DSD. _INI 6.5.1 Not required, but can be useful in setting up devices when UEFI leaves them in a state that may not be what the driver expects before it starts probing. -_IRC 7.2.15 Use as needed; power management specific. +_IRC 7.3.15 Use as needed; power management specific. + +_LCK 6.3.4 Use as needed. + +_LPI 8.4.4.3 Use as needed, but recommended for use with processor + definitions (_HID ACPI0010) on arm64. -_LCK 6.3.4 Optional. +_MAT 6.2.10 Use as needed; see also the MADT. -_MAT 6.2.10 Optional; see also the MADT. +_MBM 9.13.2.1 Use as needed. -_MLS 6.1.7 Optional, but highly recommended for use in +_MLS 6.1.7 Use as needed, but highly recommended for use in internationalization. -_OFF 7.1.2 It is recommended to define this method for any device +_MSG 9.2.2 Use as needed. + +_MSM 9.13.2.2 Use as needed. + +_MTL 11.4.8 Use as needed. + +_NTT 11.4.9 Use as needed. + +_OFF 7.2.2 It is recommended to define this method for any device that can be turned on or off. -_ON 7.1.3 It is recommended to define this method for any device +_ON 7.2.3 It is recommended to define this method for any device that can be turned on or off. \_OS 5.7.3 This method will return "Linux" by default (this is @@ -405,115 +506,219 @@ _OSC 6.2.11 This method can be a global method in ACPI (i.e., being used or what functionality is provided. The _OSC method is to be used instead. -_OST 6.3.5 Optional. +_OST 6.3.5 Use as needed. + +_PCT 8.4.6.1 Use as needed; power management specific. _PDC 8.4.1 Deprecated, do not use on arm64. +_PDL 8.4.6.2 Use as needed; power management specific. + \_PIC 5.8.1 The method should not be used. On arm64, the only interrupt model available is GIC. -_PLD 6.1.8 Optional. +_PLD 6.1.8 Use as needed. + +_PPC 8.4.6.3 Use as needed; power management specific. + +_PPE 8.4.8 Use as needed. \_PR 5.3.1 This namespace is for x86 use only on legacy systems. Do not use it on arm64. -_PRS 6.2.12 Optional. +_PRE 7.3.12 Use as needed; power management specific. + +_PRR 7.3.26 Use as needed; power management specific. + +_PRS 6.2.12 Use as needed. _PRT 6.2.13 Required as part of the definition of all PCI root devices. -_PRW 7.2.13 Use as needed; power management specific. +_PRW 7.3.13 Use as needed; power management specific. -_PRx 7.2.8-11 Use as needed; power management specific. If _PR0 is +_PRx 7.3.8-11 Use as needed; power management specific. If _PR0 is defined, _PR3 must also be defined. -_PSC 7.2.6 Use as needed; power management specific. +_PSC 7.3.6 Use as needed; power management specific. + +_PSD 8.4.6.5 Use as needed; power management specific. -_PSE 7.2.7 Use as needed; power management specific. +_PSE 7.3.7 Use as needed; power management specific. -_PSW 7.2.14 Use as needed; power management specific. +_PSL 11.4.10 Use as needed. -_PSx 7.2.2-5 Use as needed; power management specific. If _PS0 is +_PSS 8.4.6.2 Use as needed; power management specific. + +_PSV 11.4.11 Use as needed. + +_PSW 7.3.14 Use as needed; power management specific. + +_PSx 7.3.2-5 Use as needed; power management specific. If _PS0 is defined, _PS3 must also be defined. If clocks or regulators need adjusting to be consistent with power usage, change them in these methods. -\_PTS 7.3.1 Use as needed; power management specific. +_PTC 8.4.5.1 Use as needed; power management specific. + +\_PTS 7.4.1 Use as needed; power management specific. + +_PUR 8.5.1.1 Use as needed. + +_PXM 6.2.14 Use as needed. -_PXM 6.2.14 Optional. +_RDI 8.4.4.4 Use as needed, but recommended for use with processor + definitions (_HID ACPI0010) on arm64. _REG 6.5.4 Use as needed. \_REV 5.7.4 Always returns the latest version of ACPI supported. -_RMV 6.3.6 Optional. +_RMV 6.3.6 Use as needed. + +_RST 7.3.25 Use as needed; power management specific. + +_RTV 11.4.12 Use as needed. \_SB 5.3.1 Required on arm64; all devices must be defined in this namespace. +_SCP 11.4.13 Use as needed. + +_SDD 9.9.3.3.1 Use as needed. + _SEG 6.5.6 Use as needed; PCI-specific. -\_SI 5.3.1, Optional. - 9.1 +\_SI 5.3.1, Use as needed. + 9.2 + +_SLI 6.2.15 Use as needed; recommended when SLIT table is in use. -_SLI 6.2.15 Optional; recommended when SLIT table is in use. +_SRT 9.18.4 Use as needed. _STA 6.3.7, It is recommended to define this method for any device - 7.1.4 that can be turned on or off. + 7.2.4 that can be turned on or off. See also the STAO table + that provides overrides to hide devices in virtualized + environments. -_SRS 6.2.16 Optional; see also _PRS. +_SRS 6.2.16 Use as needed; see also _PRS. + +_SST 9.2.1 Use as needed. _STR 6.1.10 Recommended for conveying device names to end users; this is preferred over using _DDN. +_SST 9.2.1 Use as needed. + +_STP 9.18.7 Use as needed. + +_STV 9.18.8 Use as needed. + _SUB 6.1.9 Use as needed; _HID or _CID are preferred. -_SUN 6.1.11 Optional. +_SUN 6.1.11 Use as needed, but recommended. -\_Sx 7.3.2 Use as needed; power management specific. +\_Sx 7.4.2 Use as needed; power management specific. -_SxD 7.2.16-19 Use as needed; power management specific. +_SxD 7.3.16-19 Use as needed; power management specific. -_SxW 7.2.20-24 Use as needed; power management specific. +_SxW 7.3.20-24 Use as needed; power management specific. -_SWS 7.3.3 Use as needed; power management specific; this may +_SWS 7.4.3 Use as needed; power management specific; this may require specification changes for use on arm64. -\_TTS 7.3.4 Use as needed; power management specific. +_TC1 11.4.14 Use as needed. + +_TC2 11.4.15 Use as needed. + +_TDL 8.4.5.5 Use as needed; power management specific. + +_TFP 11.4.16 Use as needed. + +_TIP 9.18.9 Use as needed. + +_TIV 9.18.10 Use as needed. + +_TMP 11.4.17 Use as needed. + +_TPC 8.4.5.3 Use as needed; power management specific. -\_TZ 5.3.1 Optional. +_TPT 11.4.18 Use as needed. + +_TRT 11.4.19 Use as needed. + +_TSD 8.4.5.4 Use as needed; power management specific. + +_TSN 11.4.20 Use as needed. + +_TSP 11.4.21 Use as needed. + +_TSS 8.4.5.2 Use as needed; power management specific. + +_TST 11.4.22 Use as needed. + +\_TTS 7.4.4 Use as needed; power management specific. + +\_TZ 5.3.1 Use as needed. + +_TZD 11.4.23 Use as needed. + +_TZM 11.4.24 Use as needed. + +_TZP 11.4.25 Use as needed. _UID 6.1.12 Recommended for distinguishing devices of the same class; define it if at all possible. -\_WAK 7.3.5 Use as needed; power management specific. +_UPC 9.14 Use as needed. + +\_WAK 7.4.5 Use as needed; power management specific. + + ACPI Event Model ---------------- Do not use GPE block devices; these are not supported in the hardware reduced profile used by arm64. Since there are no GPE blocks defined for use on ARM -platforms, GPIO-signaled interrupts should be used for creating system events. +platforms, ACPI events must be signaled differently. + +There are two options: GPIO-signaled interrupts (Section 5.6.5), and +interrupt-signaled events (Section 5.6.9). Interrupt-signaled events are a +new feature in the ACPI 6.1 specification. Either -- or both -- can be used +on a given platform, and which to use may be dependent of limitations in any +given SoC. If possible, interrupt-signaled events are recommended. ACPI Processor Control ---------------------- -Section 8 of the ACPI specification is currently undergoing change that -should be completed in the 6.0 version of the specification. Processor -performance control will be handled differently for arm64 at that point -in time. Processor aggregator devices (section 8.5) will not be used, -for example, but another similar mechanism instead. - -While UEFI constrains what we can say until the release of 6.0, it is -recommended that CPPC (8.4.5) be used as the primary model. This will -still be useful into the future. C-states and P-states will still be -provided, but most of the current design work appears to favor CPPC. +Section 8 of the ACPI specification changed significantly in version 6.0. +Processors should now be defined as Device objects with _HID ACPI0007; do +not use the deprecated Processor statement in ASL. All multiprocessor systems +should also define a hierarchy of processors, done with Processor Container +Devices (see Section 8.4.3.1, _HID ACPI0010); do not use processor aggregator +devices (Section 8.5) to describe processor topology. Section 8.4 of the +specification describes the semantics of these object definitions and how +they interrelate. + +Most importantly, the processor hierarchy defined also defines the low power +idle states that are available to the platform, along with the rules for +determining which processors can be turned on or off and the circumstances +that control that. Without this information, the processors will run in +whatever power state they were left in by UEFI. + +Note too, that the processor Device objects defined and the entries in the +MADT for GICs are expected to be in sychronization. The _UID of the Device +object must correspond to processor IDs used in the MADT. + +It is recommended that CPPC (8.4.5) be used as the primary model for processor +performance control on arm64. C-states and P-states may become available at +some point in the future, but most current design work appears to favor CPPC. Further, it is essential that the ARMv8 SoC provide a fully functional implementation of PSCI; this will be the only mechanism supported by ACPI -to control CPU power state (including secondary CPU booting). - -More details will be provided on the release of the ACPI 6.0 specification. +to control CPU power state. Booting of secondary CPUs may be possible using +parking protocol, but only PSCI is to be used for ARM servers. ACPI System Address Map Interfaces @@ -535,21 +740,25 @@ used to indicate fatal errors that cannot be corrected, and require immediate attention. Since there is no direct equivalent of the x86 SCI or NMI, arm64 handles -these slightly differently. The SCI is handled as a normal GPIO-signaled -interrupt; given that these are corrected (or correctable) errors being -reported, this is sufficient. The NMI is emulated as the highest priority -GPIO-signaled interrupt possible. This implies some caution must be used -since there could be interrupts at higher privilege levels or even interrupts -at the same priority as the emulated NMI. In Linux, this should not be the -case but one should be aware it could happen. +these slightly differently. The SCI is handled as a high priority interrupt; +given that these are corrected (or correctable) errors being reported, this +is sufficient. The NMI is emulated as the highest priority interrupt +possible. This implies some caution must be used since there could be +interrupts at higher privilege levels or even interrupts at the same priority +as the emulated NMI. In Linux, this should not be the case but one should +be aware it could happen. ACPI Objects Not Supported on ARM64 ----------------------------------- While this may change in the future, there are several classes of objects that can be defined, but are not currently of general interest to ARM servers. +Some of these objects have x86 equivalents, and may actually make sense in ARM +servers. However, there is either no hardware available at present, or there +may not even be a non-ARM implementation yet. Hence, they are not currently +supported. -These are not supported: +The following classes of objects are not supported: -- Section 9.2: ambient light sensor devices @@ -571,16 +780,6 @@ These are not supported: -- Section 9.18: time and alarm devices (see 9.15) - -ACPI Objects Not Yet Implemented --------------------------------- -While these objects have x86 equivalents, and they do make some sense in ARM -servers, there is either no hardware available at present, or in some cases -there may not yet be a non-ARM implementation. Hence, they are currently not -implemented though that may change in the future. - -Not yet implemented are: - -- Section 10: power source and power meter devices -- Section 11: thermal management @@ -589,5 +788,31 @@ Not yet implemented are: -- Section 13: SMBus interfaces - -- Section 17: NUMA support (prototypes have been submitted for - review) + +This also mean that there is no support for the following objects: + +Name Section Name Section +---- ------------ ---- ------------ +_ALC 9.3.4 _FDM 9.10.3 +_ALI 9.3.2 _FIX 6.2.7 +_ALP 9.3.6 _GAI 10.4.5 +_ALR 9.3.5 _GHL 10.4.7 +_ALT 9.3.3 _GTM 9.9.2.1.1 +_BCT 10.2.2.10 _LID 9.5.1 +_BDN 6.5.3 _PAI 10.4.4 +_BIF 10.2.2.1 _PCL 10.3.2 +_BIX 10.2.2.1 _PIF 10.3.3 +_BLT 9.2.3 _PMC 10.4.1 +_BMA 10.2.2.4 _PMD 10.4.8 +_BMC 10.2.2.12 _PMM 10.4.3 +_BMD 10.2.2.11 _PRL 10.3.4 +_BMS 10.2.2.5 _PSR 10.3.1 +_BST 10.2.2.6 _PTP 10.4.2 +_BTH 10.2.2.7 _SBS 10.1.3 +_BTM 10.2.2.9 _SHL 10.4.6 +_BTP 10.2.2.8 _STM 9.9.2.1.1 +_DCK 6.5.2 _UPD 9.16.1 +_EC 12.12 _UPP 9.16.2 +_FDE 9.10.1 _WPC 10.5.2 +_FDI 9.10.2 _WPP 10.5.3 + diff --git a/Documentation/arm64/arm-acpi.txt b/Documentation/arm64/arm-acpi.txt index 570a4f8..12381c1 100644 --- a/Documentation/arm64/arm-acpi.txt +++ b/Documentation/arm64/arm-acpi.txt @@ -57,11 +57,11 @@ The short form of the rationale for ACPI on ARM is: -- The new ACPI governance process works well and Linux is now at the same table as hardware vendors and other OS vendors. In fact, there is no - longer any reason to feel that ACPI is only belongs to Windows or that + longer any reason to feel that ACPI only belongs to Windows or that Linux is in any way secondary to Microsoft in this arena. The move of ACPI governance into the UEFI forum has significantly opened up the specification development process, and currently, a large portion of the - changes being made to ACPI is being driven by Linux. + changes being made to ACPI are being driven by Linux. Key to the use of ACPI is the support model. For servers in general, the responsibility for hardware behaviour cannot solely be the domain of the @@ -159,7 +159,7 @@ Further, the ACPI core will only use the 64-bit address fields in the FADT (Fixed ACPI Description Table). Any 32-bit address fields in the FADT will be ignored on arm64. -Hardware reduced mode (see Section 4.1 of the ACPI 5.1 specification) will +Hardware reduced mode (see Section 4.1 of the ACPI 6.1 specification) will be enforced by the ACPI core on arm64. Doing so allows the ACPI core to run less complex code since it no longer has to provide support for legacy hardware from other architectures. Any fields that are not to be used for @@ -167,7 +167,7 @@ hardware reduced mode must be set to zero. For the ACPI core to operate properly, and in turn provide the information the kernel needs to configure devices, it expects to find the following -tables (all section numbers refer to the ACPI 5.1 specfication): +tables (all section numbers refer to the ACPI 6.1 specfication): -- RSDP (Root System Description Pointer), section 5.2.5 @@ -185,9 +185,22 @@ tables (all section numbers refer to the ACPI 5.1 specfication): -- If PCI is supported, the MCFG (Memory mapped ConFiGuration Table), section 5.2.6, specifically Table 5-31. + -- If booting without a console=<device> kernel parameter is + supported, the SPCR (Serial Port Console Redirection table), + section 5.2.6, specifically Table 5-31. + + -- If virtualization is supported, the IORT (Input Output Remapping + Table, section 5.2.6, specifically Table 5-31. + + -- If NUMA is supported, the SRAT (System Resource Affinity Table) + and SLIT (System Locality distance Information Table), sections + 5.2.16 and 5.2.17, respectively. + If the above tables are not all present, the kernel may or may not be able to boot properly since it may not be able to configure all of the -devices available. +devices available. This list of tables is not meant to be all inclusive; +in some environments other tables may be needed (e.g., any of the APEI +tables from section 18) to support specific functionality. ACPI Detection @@ -233,7 +246,7 @@ that looks like this: Name(KEY0, "value0"). An ACPI device driver would then retrieve the value of the property by evaluating the KEY0 object. However, using Name() this way has multiple problems: (1) ACPI limits names ("KEY0") to four characters unlike DT; (2) there is no industry -wide registry that maintains a list of names, minimzing re-use; (3) +wide registry that maintains a list of names, minimizing re-use; (3) there is also no registry for the definition of property values ("value0"), again making re-use difficult; and (4) how does one maintain backward compatibility as new hardware comes out? The _DSD method was created @@ -434,7 +447,8 @@ The ACPI specification changes regularly. During the year 2014, for instance, version 5.1 was released and version 6.0 substantially completed, with most of the changes being driven by ARM-specific requirements. Proposed changes are presented and discussed in the ASWG (ACPI Specification Working Group) which -is a part of the UEFI Forum. +is a part of the UEFI Forum. The current version of the ACPI specification +is 6.1 release in January 2016. Participation in this group is open to all UEFI members. Please see http://www.uefi.org/workinggroup for details on group membership. -- 2.5.0

8 years, 3 months

[PATCH v4 0/5] acpi, clocksource, kvm: add GTDT and ARM memory-mapped timer support

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Move some enums and marcos to header file for arm_arch_timer, improve the pr_* code by defining "pr_fmt(fmt)" in arm_arch_timer.c (2)Introduce ACPI GTDT parser: drivers/acpi/gtdt.c Parse all kinds of timer in GTDT table of ACPI:arch timer, memory-mapped timer and SBSA Generic Watchdog timer. This driver can help to simplify all the relevant timer drivers, and separate all the ACPI GTDT knowledge from them. (3)Simplify ACPI code for arch timer in arm_arch_timer.c (4)Add memory-mapped timer support in arm_arch_timer.c Changelog: v4: Delete the kvm relevant patches Separate two patches for sorting out the code for arm_arch_timer. Improve irq info export code to allow missing irq info in GTDT table. v3: https://lkml.org/lkml/2016/2/1/658 Improve GTDT driver code: (1)improve pr_* by defining pr_fmt(fmt) (2)simplify gtdt_sbsa_gwdt_init (3)improve gtdt_arch_timer_data_init, if table is NULL, it will try to get GTDT table. Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr. Add arm_arch_timer get ppi from DT and GTDT support for kvm. v2: https://lkml.org/lkml/2015/12/2/10 Rebase to latest kernel version(4.4-rc3). Fix the bug about the config problem, use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553 Fu Wei (5): clocksource: move some enums and marcos to header file for arm_arch_timer ACPI: add GTDT table parse driver into ACPI driver clocksource: simplify ACPI code in arm_arch_timer.c clocksource: a little improvment for printk in arm_arch_timer.c clocksource: add memory-mapped timer support in arm_arch_timer.c drivers/acpi/Kconfig | 9 + drivers/acpi/Makefile | 1 + drivers/acpi/gtdt.c | 376 +++++++++++++++++++++++++++++++++++ drivers/clocksource/Kconfig | 1 + drivers/clocksource/arm_arch_timer.c | 217 ++++++++++++++------ include/clocksource/arm_arch_timer.h | 33 +++ include/linux/acpi.h | 17 ++ 7 files changed, 595 insertions(+), 59 deletions(-) create mode 100644 drivers/acpi/gtdt.c -- 2.5.0

8 years, 3 months

Re: [Linaro-acpi] Firmware Test Suite 16.03.00 is released

by Itaru Kitayama

Hi, Is anyone continuously testing QEMU F/W with this test suite within Linaro in an automated way? I'd like to compare my results.log obtained locally with it, if available. Itaru

8 years, 3 months

Fwd: Firmware Test Suite 16.03.00 is released

by Alex Hung

FWTS 16.03.00 is released. It is available from: Tar: http://fwts.ubuntu.com/release/fwts-V16.03.00.tar.gz PPA: https://launchpad.net/~firmware-testing-team/+archive/ubuntu/ppa-fwts-stable Release notes: https://wiki.ubuntu.com/FirmwareTestSuite/ReleaseNotes/16.03.00 = New Features = * debian/control: Add s390x to Architecture list (LP: #1549737) * Add s390x build support, don't build ACPI specific code for this arch * Add s390x build support: skip tests that are not build in for this arch * Add s390x build support, don't build UEFI specific code for this arch * uefi: add sanity check for UEFI ESRT table (LP: #1553043) = Fixed Bugs = * Debian/control: don't build UEFI kernel module for s390x * uefi: esrt: don't build UEFI specific code for s390x * smatchify: add two passes option * acpi: csrt: fix a spelling mistake in a comment * acpi: csrt: fix resource descriptor can go over boundary * lib: fwts_cpu: fix memory leak and incorrect return (LP: #1549723) * acpi: fan: fix indentation, remove extraneous tab * acpi: method: fix a few incorrectly idented lines of code * bios: mpcheck: fix trivial indentation issue * bios: mpdump: fix trivial indentation issue * uefi: uefirtvariable: fix trivial indentation issues * uefi: uefirtauthvar: fix trivial indentation issues * uefi: esrt: fix the resource leak found by Coverity Scan * uefi: esrt: fix build failure due to lack of header file * acpi: method: fix fail check on _EC control method (LP: #1556720) * acpi: method: fix _ON method never be tested. * acpi: method: remove some reduntant and unused tests. = Detail Changelog = To check /usr/share/doc/fwts/changelog.Debian.gz or fwts_16.03.00-0ubuntu1.debian.tar.gz from https://launchpad.net/ubuntu/+source/fwts

8 years, 3 months

[PATCH V4 0/5] acpi: cppc optimization patches

by Prashanth Prakash

Changes in V4: [1] Added another patch which decides if or when to send a request to the platform based on the Minimum Request Turnaround Time(MRTT) and Maximum Periodic Access Rate(MPAR) to make sure the implementation is compliant to ACPI spec [2] Fixed the condition for pr_debug message in cppc_chan_tx_done() Changes in V3: Addressed the review comments from Alexey, Ashwin and Timur Changes in V2: Fixed compilation error on i386 This series introduces changes to reduce the time required to send a frequency transition requests to the platform while using the cppc-cpufreq driver. With these changes we see significant improvement in the average time to send freq. transition request to the platform. Profiling on an ARM platform showed that the average transaction time per request reduced from 200us to under 20us. Ashwin Chaugule (1): ACPI / CPPC: Optimize PCC Read Write operations Prashanth Prakash (4): acpi: cppc: optimized cpc_read and cpc_write mailbox: pcc: optimized pcc_send_data acpi: cppc: replace writeX/readX to PCC with relaxed version acpi/cppc: use MRTT/MPAR to decide if/when a req can be sent drivers/acpi/cppc_acpi.c | 237 ++++++++++++++++++++++++++++++++++++++--------- drivers/mailbox/pcc.c | 111 ++++++++++++++++++++-- 2 files changed, 295 insertions(+), 53 deletions(-) -- Qualcomm Technologies, Inc. on behalf of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

8 years, 3 months

[PATCH v6] acpi, apei, arm64: APEI initial support for aarch64.

by fu.wei＠linaro.org

From: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> This commit provides APEI arch-specific bits for aarch64 Meanwhile, (1)add a new subfunction "hest_ia32_init" for "acpi_disable_cmcff" which is used by IA-32 Architecture Corrected Machine Check (CMC). (2)move HEST type (ACPI_HEST_TYPE_IA32_CORRECTED_CHECK) checking to a generic place. Signed-off-by: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> Tested-by: Jonathan (Zhixiong) Zhang <zjzhang(a)codeaurora.org> Signed-off-by: Fu Wei <fu.wei(a)linaro.org> Acked-by: Hanjun Guo <hanjun.guo(a)linaro.org> Tested-by: Tyler Baicar <tbaicar(a)codeaurora.org> --- Changelog: v6: Move HEST type (ACPI_HEST_TYPE_IA32_CORRECTED_CHECK) checking to a generic place. Delete HAVE_ACPI_APEI_HEST_IA32. v5: Add "HAVE_ACPI_APEI_HEST_IA32" instead of "#if defined(__i386__) || defined(__x86_64__)". v4: Rebase to latest kernel version(4.4-rc4). Move arch_apei_flush_tlb_one into header file as a inline function Add a new subfunction "hest_ia_init" for "acpi_disable_cmcff". v3: https://lkml.org/lkml/2015/12/3/521 Remove "acpi_disable_cmcff" from arm64 code, and wrap it in hest.c by "#if defined(__i386__) || defined(__x86_64__)" v2: https://lkml.org/lkml/2015/12/2/432 Rebase to latest kernel version(4.4-rc3). Move arch_apei_flush_tlb_one() to arch/arm64/kernel/acpi.c v1: https://lkml.org/lkml/2015/8/14/199 Move arch_apei_flush_tlb_one() to arch/arm64/include/asm/apci.h. Delete arch/arm64/kernel/apei.c. Add "#ifdef CONFIG_ACPI_APEI" for "acpi_disable_cmcff". arch/arm64/Kconfig | 1 + arch/arm64/include/asm/acpi.h | 8 +++++++- arch/x86/kernel/acpi/apei.c | 3 --- drivers/acpi/apei/hest.c | 18 +++++++++++++++--- 4 files changed, 23 insertions(+), 7 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 8cc6228..7b430d9 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -3,6 +3,7 @@ config ARM64 select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI + select HAVE_ACPI_APEI if ACPI select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_ELF_RANDOMIZE diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index caafd63..1a21c996 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -17,6 +17,7 @@ #include <asm/cputype.h> #include <asm/smp_plat.h> +#include <asm/tlbflush.h> /* Macros for consistency checks of the GICC subtable of MADT */ #define ACPI_MADT_GICC_LENGTH \ @@ -93,7 +94,12 @@ static inline const char *acpi_get_enable_method(int cpu) } #ifdef CONFIG_ACPI_APEI +#define acpi_disable_cmcff 1 pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr); -#endif +static inline void arch_apei_flush_tlb_one(unsigned long addr) +{ + flush_tlb_kernel_range(addr, addr + PAGE_SIZE); +} +#endif /* CONFIG_ACPI_APEI */ #endif /*_ASM_ACPI_H*/ diff --git a/arch/x86/kernel/acpi/apei.c b/arch/x86/kernel/acpi/apei.c index c280df6..ea3046e 100644 --- a/arch/x86/kernel/acpi/apei.c +++ b/arch/x86/kernel/acpi/apei.c @@ -24,9 +24,6 @@ int arch_apei_enable_cmcff(struct acpi_hest_header *hest_hdr, void *data) struct acpi_hest_ia_corrected *cmc; struct acpi_hest_ia_error_bank *mc_bank; - if (hest_hdr->type != ACPI_HEST_TYPE_IA32_CORRECTED_CHECK) - return 0; - cmc = (struct acpi_hest_ia_corrected *)hest_hdr; if (!cmc->enabled) return 0; diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 20b3fcf..792a0d9 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -123,7 +123,18 @@ EXPORT_SYMBOL_GPL(apei_hest_parse); */ static int __init hest_parse_cmc(struct acpi_hest_header *hest_hdr, void *data) { - return arch_apei_enable_cmcff(hest_hdr, data); + if (hest_hdr->type != ACPI_HEST_TYPE_IA32_CORRECTED_CHECK) + return 0; + + if (!acpi_disable_cmcff) + return !arch_apei_enable_cmcff(hest_hdr, data); + + return 0; +} + +static inline int __init hest_ia32_init(void) +{ + return apei_hest_parse(hest_parse_cmc, NULL); } struct ghes_arr { @@ -232,8 +243,9 @@ void __init acpi_hest_init(void) goto err; } - if (!acpi_disable_cmcff) - apei_hest_parse(hest_parse_cmc, NULL); + rc = hest_ia32_init(); + if (rc) + goto err; if (!ghes_disable) { rc = apei_hest_parse(hest_parse_ghes_count, &ghes_count); -- 2.5.0

8 years, 3 months

[PATCH V4 00/23] MMCONFIG refactoring and support for ARM64 PCI hostbridge init based on ACPI

by Tomasz Nowicki

>From the functionality point of view this series might be split into the following logic parts: 1. Make MMCONFIG code arch-agnostic which allows all architectures to collect PCI config regions and used when necessary. 2. Move non-arch specific bits to the core code. 3. Use MMCONFIG code and implement generic ACPI based PCI host controller driver. 4. Enable above driver on ARM64 Patches has been built on top of 4.5-rc1 and can be found here: git@github.com:semihalf-nowicki-tomasz/linux.git (pci-acpi-v4) NOTE, this patch set depends on Lorenzo's fixes: https://patchwork.ozlabs.org/patch/576450/ which can be found in pci-acpi-v4 branch. This has been tested on Cavium ThunderX server, JunoR2, HP RX2660 IA64, x86, Hip05, X-Gene and QEMU-aarch64. Any help in reviewing and testing is very appreciated. v3 -> v4 - dropped Jiang's fix http://lkml.iu.edu/hypermail/linux/kernel/1601.1/04318.html - added Lorenzo's fix patch 19/24 - ACPI PCI bus domain number assigning cleanup - changed resource management, we now claim and reassign resources - improvements for applying quirks - dropped Matthew's http://www.spinics.net/lists/linux-pci/msg45950.html dependency - rebased to 4.5-rc1 v2 -> v3 - fix legacy IRQ assigning and IO ports registration - remove reference to arch specific companion device for ia64 - move ACPI PCI host controller driver to pci_root.c - drop generic domain assignment for x86 and ia64 as I am not able to run all necessary test variants - drop patch which cleaned legacy IRQ assignment since it belongs to Mathew's series: https://patchwork.ozlabs.org/patch/557504/ - extend MCFG quirk code - rebased to 4.4 v1 -> v2 - moved non-arch specific piece of code to dirver/acpi/ directory - fixed IO resource handling - introduced PCI config accessors quirks matching - moved ACPI_COMPANION_SET to generic code v1 - https://lkml.org/lkml/2015/10/27/504 v2 - https://lkml.org/lkml/2015/12/16/246 v3 - http://lkml.iu.edu/hypermail/linux/kernel/1601.1/04308.html Lorenzo Pieralisi (1): drivers: pci: add generic code to claim bus resources Tomasz Nowicki (22): x86, pci: Reorder logic of pci_mmconfig_insert() function x86, pci, acpi: Move arch-agnostic MMCONFIG (aka ECAM) and ACPI code out of arch/x86/ directory pci, acpi, mcfg: Provide generic implementation of MCFG code initialization. x86, pci: mmconfig_{32,64}.c code refactoring - remove code duplication. x86, pci, ecam: mmconfig_64.c becomes default implementation for ECAM driver. XEN / PCI: Remove the dependence on arch x86 when PCI_MMCONFIG=y pci, acpi, mcfg: Provide default RAW ACPI PCI config space accessors. arm64, acpi: Use MCFG and empty PCI config space accessors from mcfg.c file. pci, acpi, ecam: Add flag to indicate whether ECAM region was hot added or not. x86, pci: Cleanup platform specific MCFG data by using ECAM hot_added flag. pci, acpi: Move ACPI host bridge device companion assignment to core code. x86, ia64, pci: Remove ACPI companion device from platform specific data. pci, acpi: Provide generic way to assign bus domain number. x86, ia64: Include acpi_pci_{add|remove}_bus to the default pcibios_{add|remove}_bus implementation. acpi, mcfg: Implement two calls that might be used to inject/remove MCFG region. x86, acpi, pci: Use equivalent function from mcfg.c driver. acpi, mcfg: Add default PCI config accessors implementation and initial support for related quirks. pci, of: Move the PCI I/O space management to PCI core code. pci, acpi: Support for ACPI based generic PCI host controller init pci, acpi: Match PCI config space accessors against platfrom specific quirks. arm64, pci, acpi: Assign legacy IRQs once device is enable. arm64, pci, acpi: Start using ACPI based PCI host bridge driver for ARM64. arch/arm64/Kconfig | 8 ++ arch/arm64/kernel/pci.c | 37 ++---- arch/ia64/hp/common/sba_iommu.c | 2 +- arch/ia64/include/asm/pci.h | 1 - arch/ia64/pci/pci.c | 26 ---- arch/ia64/sn/kernel/io_acpi_init.c | 4 +- arch/x86/Kconfig | 4 + arch/x86/include/asm/pci.h | 3 - arch/x86/include/asm/pci_x86.h | 28 +---- arch/x86/pci/acpi.c | 56 ++------- arch/x86/pci/common.c | 10 -- arch/x86/pci/mmconfig-shared.c | 250 ++++++------------------------------- arch/x86/pci/mmconfig_32.c | 11 +- arch/x86/pci/mmconfig_64.c | 67 +--------- arch/x86/pci/numachip.c | 1 + drivers/acpi/Kconfig | 7 ++ drivers/acpi/Makefile | 1 + drivers/acpi/mcfg.c | 201 +++++++++++++++++++++++++++++ drivers/acpi/pci_root.c | 134 +++++++++++++++++++- drivers/of/address.c | 116 +---------------- drivers/pci/Kconfig | 10 ++ drivers/pci/Makefile | 5 + drivers/pci/ecam.c | 234 ++++++++++++++++++++++++++++++++++ drivers/pci/pci.c | 126 ++++++++++++++++++- drivers/pci/probe.c | 5 + drivers/pci/setup-bus.c | 63 ++++++++++ drivers/xen/pci.c | 7 +- include/acpi/acpi_bus.h | 1 + include/asm-generic/vmlinux.lds.h | 7 ++ include/linux/acpi.h | 2 + include/linux/ecam.h | 62 +++++++++ include/linux/of_address.h | 9 -- include/linux/pci-acpi.h | 19 +++ include/linux/pci.h | 6 + 34 files changed, 962 insertions(+), 561 deletions(-) create mode 100644 drivers/acpi/mcfg.c create mode 100644 drivers/pci/ecam.c create mode 100644 include/linux/ecam.h -- 1.9.1

8 years, 3 months

← Newer
1
...
8
9
10
11
12
13
14
...
82
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Linaro-acpi