Linaro-acpi

linaro-acpi@lists.linaro.org

820 discussions

[PATCH v15 00/13] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Preparation for adding GTDT support in arm_arch_timer: 1. Move some enums and marcos to header file; 2. Add a new enum for spi type; 3. Improve printk relevant code. 4. rename some enums and defines, and some cleanups. 5. separate out arch_timer_uses_ppi init code and fix a potential bug 6. Introduce some new structs and refactor the timer init code (2)Introduce ACPI GTDT parser: drivers/acpi/arm64/acpi_gtdt.c Parse all kinds of timer in GTDT table of ACPI:arch timer, memory-mapped timer and SBSA Generic Watchdog timer. This driver can help to simplify all the relevant timer drivers, and separate all the ACPI GTDT knowledge from them. (3)Simplify ACPI code for arm_arch_timer (4)Add GTDT support for ARM memory-mapped timer, also refactor original memory-mapped timer dt support for reusing some common code. This patchset has been tested on the following platforms with ACPI enabled: (1)ARM Foundation v8 model Changelog: v15: https://lkml.org/lkml/2016/11/15/ Re-order patches Add arm_arch_timer refactoring patches to prepare for GTDT: 1. rename some enums and defines, and some cleanups 2. separate out arch_timer_uses_ppi init code and fix a potential bug 3. Improve some new structs, refactor the timer init code. Since the some structs have been changed, GTDT parser for memory-mapped timer and SBSA Generic Watchdog timer have been update. v14: https://lkml.org/lkml/2016/9/28/573 Separate memory-mapped timer GTDT support into two patches 1. Refactor the timer init code to prepare for GTDT 2. Add GTDT support for memory-mapped timer v13: http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1231717.html Improve arm_arch_timer code for memory-mapped timer GTDT support, refactor original memory-mapped timer dt support for reusing some common code. v12: https://lkml.org/lkml/2016/9/13/250 Rebase to latest Linux 4.8-rc6 Delete the confusing "skipping" in the error message. V11: https://lkml.org/lkml/2016/9/6/354 Rebase to latest Linux 4.8-rc5 Delete typedef (suggested by checkpatch.pl) V10: https://lkml.org/lkml/2016/7/26/215 Drop the "readq" patch. Rebase to latest Linux 4.7. V9: https://lkml.org/lkml/2016/7/25/345 Improve pr_err message in acpi gtdt driver. Update Commit message for 7/9 shorten the irq mapping function name Improve GTDT driver for memory-mapped timer v8: https://lkml.org/lkml/2016/7/19/660 Improve "pr_fmt(fmt)" definition: add "ACPI" in front of "GTDT", and also improve printk message. Simplify is_timer_block and is_watchdog. Merge acpi_gtdt_desc_init and gtdt_arch_timer_init into acpi_gtdt_init(); Delete __init in include/linux/acpi.h for GTDT API Make ARM64 select GTDT. Delete "#include <linux/module.h>" from acpi_gtdt.c Simplify GT block parse code. v7: https://lkml.org/lkml/2016/7/13/769 Move the GTDT driver to drivers/acpi/arm64 Add add the ARM64-specific ACPI Support maintainers in MAINTAINERS Merge 3 patches of GTDT parser driver. Fix the for_each_platform_timer bug. v6: https://lkml.org/lkml/2016/6/29/580 split the GTDT driver to 4 parts: basic, arch_timer, memory-mapped timer, and SBSA Generic Watchdog timer Improve driver by suggestions and example code from Daniel Lezcano v5: https://lkml.org/lkml/2016/5/24/356 Sorting out all patches, simplify the API of GTDT driver: GTDT driver just fills the data struct for arm_arch_timer driver. v4: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006667.html Delete the kvm relevant patches Separate two patches for sorting out the code for arm_arch_timer. Improve irq info export code to allow missing irq info in GTDT table. v3: https://lkml.org/lkml/2016/2/1/658 Improve GTDT driver code: (1)improve pr_* by defining pr_fmt(fmt) (2)simplify gtdt_sbsa_gwdt_init (3)improve gtdt_arch_timer_data_init, if table is NULL, it will try to get GTDT table. Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr. Add arm_arch_timer get ppi from DT and GTDT support for kvm. v2: https://lkml.org/lkml/2015/12/2/10 Rebase to latest kernel version(4.4-rc3). Fix the bug about the config problem, use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553 Fu Wei (13): clocksource/drivers/arm_arch_timer: Move enums and defines to header file clocksource/drivers/arm_arch_timer: Add a new enum for spi type clocksource/drivers/arm_arch_timer: Improve printk relevant code clocksource/drivers/arm_arch_timer: rename some enums and defines, and some cleanups. clocksource/drivers/arm_arch_timer: fix a bug in arch_timer_register about arch_timer_uses_ppi clocksource/drivers/arm_arch_timer: separate out arch_timer_uses_ppi init code to prepare for GTDT. clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT clocksource/drivers/arm_arch_timer: Refactor the timer init code to prepare for GTDT acpi/arm64: Add GTDT table parse driver clocksource/drivers/arm_arch_timer: Simplify ACPI support code. acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver arch/arm64/Kconfig | 1 + drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/gtdt.c | 411 ++++++++++++++++++++++++++++++++++ drivers/clocksource/arm_arch_timer.c | 420 ++++++++++++++++++++--------------- drivers/watchdog/Kconfig | 1 + include/clocksource/arm_arch_timer.h | 61 +++-- include/linux/acpi.h | 8 + virt/kvm/arm/hyp/timer-sr.c | 6 +- 9 files changed, 720 insertions(+), 192 deletions(-) create mode 100644 drivers/acpi/arm64/gtdt.c -- 2.7.4

7 years, 6 months

[PATCH v14 0/9] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Preparation for adding GTDT support in arm_arch_timer: 1. Move some enums and marcos to header file; 2. Add a new enum for spi type; 3. Improve printk relevant code. (2)Introduce ACPI GTDT parser: drivers/acpi/arm64/acpi_gtdt.c Parse all kinds of timer in GTDT table of ACPI:arch timer, memory-mapped timer and SBSA Generic Watchdog timer. This driver can help to simplify all the relevant timer drivers, and separate all the ACPI GTDT knowledge from them. (3)Simplify ACPI code for arm_arch_timer (4)Add GTDT support for ARM memory-mapped timer, also refactor original memory-mapped timer dt support for reusing some common code. This patchset depends on the following patchset: [UPDATE PATCH V11 1/8] ACPI: I/O Remapping Table (IORT) initial support https://lkml.org/lkml/2016/9/12/949 This patchset has been tested on the following platforms: (1)ARM Foundation v8 model Changelog: v14: https://lkml.org/lkml/2016/9/28/ Separate memory-mapped timer GTDT support into two patches 1. Refactor the timer init code to prepare for GTDT 2. Add GTDT support for memory-mapped timer v13: http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1231717.html Improve arm_arch_timer code for memory-mapped timer GTDT support, refactor original memory-mapped timer dt support for reusing some common code. v12: https://lkml.org/lkml/2016/9/13/250 Rebase to latest Linux 4.8-rc6 Delete the confusing "skipping" in the error message. V11: https://lkml.org/lkml/2016/9/6/354 Rebase to latest Linux 4.8-rc5 Delete typedef (suggested by checkpatch.pl) V10: https://lkml.org/lkml/2016/7/26/215 Drop the "readq" patch. Rebase to latest Linux 4.7. V9: https://lkml.org/lkml/2016/7/25/345 Improve pr_err message in acpi gtdt driver. Update Commit message for 7/9 shorten the irq mapping function name Improve GTDT driver for memory-mapped timer v8: https://lkml.org/lkml/2016/7/19/660 Improve "pr_fmt(fmt)" definition: add "ACPI" in front of "GTDT", and also improve printk message. Simplify is_timer_block and is_watchdog. Merge acpi_gtdt_desc_init and gtdt_arch_timer_init into acpi_gtdt_init(); Delete __init in include/linux/acpi.h for GTDT API Make ARM64 select GTDT. Delete "#include <linux/module.h>" from acpi_gtdt.c Simplify GT block parse code. v7: https://lkml.org/lkml/2016/7/13/769 Move the GTDT driver to drivers/acpi/arm64 Add add the ARM64-specific ACPI Support maintainers in MAINTAINERS Merge 3 patches of GTDT parser driver. Fix the for_each_platform_timer bug. v6: https://lkml.org/lkml/2016/6/29/580 split the GTDT driver to 4 parts: basic, arch_timer, memory-mapped timer, and SBSA Generic Watchdog timer Improve driver by suggestions and example code from Daniel Lezcano v5: https://lkml.org/lkml/2016/5/24/356 Sorting out all patches, simplify the API of GTDT driver: GTDT driver just fills the data struct for arm_arch_timer driver. v4: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006667.html Delete the kvm relevant patches Separate two patches for sorting out the code for arm_arch_timer. Improve irq info export code to allow missing irq info in GTDT table. v3: https://lkml.org/lkml/2016/2/1/658 Improve GTDT driver code: (1)improve pr_* by defining pr_fmt(fmt) (2)simplify gtdt_sbsa_gwdt_init (3)improve gtdt_arch_timer_data_init, if table is NULL, it will try to get GTDT table. Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr. Add arm_arch_timer get ppi from DT and GTDT support for kvm. v2: https://lkml.org/lkml/2015/12/2/10 Rebase to latest kernel version(4.4-rc3). Fix the bug about the config problem, use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553 Fu Wei (9): clocksource/drivers/arm_arch_timer: Move enums and defines to header file clocksource/drivers/arm_arch_timer: Add a new enum for spi type clocksource/drivers/arm_arch_timer: Improve printk relevant code acpi/arm64: Add GTDT table parse driver clocksource/drivers/arm_arch_timer: Simplify ACPI support code. acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource/drivers/arm_arch_timer: Refactor the timer init code to prepare for GTDT clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver arch/arm64/Kconfig | 1 + drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/gtdt.c | 309 ++++++++++++++++++++++++++++++++ drivers/clocksource/Kconfig | 2 +- drivers/clocksource/arm_arch_timer.c | 331 +++++++++++++++++++++-------------- drivers/watchdog/Kconfig | 1 + include/clocksource/arm_arch_timer.h | 32 ++++ include/linux/acpi.h | 7 + 9 files changed, 558 insertions(+), 129 deletions(-) create mode 100644 drivers/acpi/arm64/gtdt.c -- 2.7.4

7 years, 6 months

Firmware Test Suite 16.011.00 is released

by ivanhu

FWTS 16.11.00 is released. It is available from: Tar: http://fwts.ubuntu.com/release/fwts-V16.11.00.tar.gz PPA: https://launchpad.net/~firmware-testing-team/+archive/ubuntu/ppa-fwts-stable Release notes: https://wiki.ubuntu.com/FirmwareTestSuite/ReleaseNotes/16.11.00 = New Features = * ACPICA: Update to version 20160930 * uefibootpath: add test for eMMC device path * uefidump: add dumping for the eMMC device path = Fixed Bugs = * acpica: remove aslcompiler.y as it is generated from aslparser.y * debian/control: fwts-efi-runtime-dkms should not depend on kernel headers (LP: #1629826) * Build using dpkg-dev's hardening support. * acpcia: Makefile.am: include exconcat.c into libfwtsiasl build (LP: #1631354) * lib: fwts_ac_adapter: add in some constifications * lib: fwts_args: move #defines to start of source * lib: fwts_firmware: constify feature_names * lib: fwts_framework: constify categories[] and log_levels[] * lib: fwts_log_html: constify fwts_log_html_ascii_table[] * acpi: s3power: remove redundant intialization of fwts_settings * acpi: s4: remove redundant intialization of fwts_settings * acpi: s3: remove redundant intialization of fwts_settings * lib: fwts_pipeio: remove redundant initializations of file to NULL * opal: remove redundant initializations of command to NULL * lib: fwts_framework: initialize msg to literal string * dmi: dmicheck: fix a couple of cppcheck style warnings * Manual: keep contributors list up to date * fwts_devicetree: Add defines for common usage * fwts_devicetree: Add function for common usage * devicetree: dt_sysinfo: Reference compatible whitespace * fwts_acpi_tables: remove fwts_acpi_checksum declaration * acpi: dbg2: fix segfault and refactor dbg2_obj_find * fwts_framework.h: fix redefinition typedef warning * fwts_hwinfo.c: fix strict-aliasing error with old gcc * esrt.c: fix uninitialized use of 'fwversion' warning * efi_runtime: use memdup_user() as a cleanup * efi_runtime: fix the uninintialized value datasize * efi_runtime: fix the uninitialized value rv * uefibootpath: fix the URI length check * fwts_acpica: fix segmentation fault by unlock mutex twice (LP: #1635502) * debian/control: clean up uploaders list * auto-packager: mkpackage.sh: add zesty * acpi: hest: Add new error notification types * acpi: madt: Fix processor UID check * acpi: gtdt: Account for added virtual timer flags * lib: acpi: Remove gsiv field of fwts_acpi_table_gtdt_block_timer * acpi: mpst: Show test as skipped if table does not exist * lib: olog: Show test as skipped if nothing to do * acpi: pmtt: Show test as skipped if table does not exist * acpi: tcpa: Show test as skipped if table does not exist * acpi: tpm2: Show test as skipped if table does not exist * acpi: xenv: Show test as skipped if table does not exist = Detail Changelog = To check /usr/share/doc/fwts/changelog.Debian.gz or fwts_16.11.00-0ubuntu1.debian.tar.gz from https://launchpad.net/ubuntu/+source/fwts Cheers, Ivan

7 years, 6 months

[PATCH v12 0/8] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Preparation for adding GTDT support in arm_arch_timer: 1. Move some enums and marcos to header file; 2. Add a new enum for spi type; 3. Improve printk relevant code. (2)Introduce ACPI GTDT parser: drivers/acpi/arm64/acpi_gtdt.c Parse all kinds of timer in GTDT table of ACPI:arch timer, memory-mapped timer and SBSA Generic Watchdog timer. This driver can help to simplify all the relevant timer drivers, and separate all the ACPI GTDT knowledge from them. (3)Simplify ACPI code for arm_arch_timer (4)Add GTDT support for ARM memory-mapped timer This patchset depends on the following patchset: [UPDATE PATCH V11 1/8] ACPI: I/O Remapping Table (IORT) initial support https://lkml.org/lkml/2016/9/12/949 This patchset has been tested on the following platforms: (1)ARM Foundation v8 model Changelog: v12: https://lkml.org/lkml/2016/9/13/ Rebase to latest Linux 4.8-rc6 Delete the confusing "skipping" in the error message. V11: https://lkml.org/lkml/2016/9/6/354 Rebase to latest Linux 4.8-rc5 Delete typedef (suggested by checkpatch.pl) V10: https://lkml.org/lkml/2016/7/26/215 Drop the "readq" patch. Rebase to latest Linux 4.7. V9: https://lkml.org/lkml/2016/7/25/345 Improve pr_err message in acpi gtdt driver. Update Commit message for 7/9 shorten the irq mapping function name Improve GTDT driver for memory-mapped timer v8: https://lkml.org/lkml/2016/7/19/660 Improve "pr_fmt(fmt)" definition: add "ACPI" in front of "GTDT", and also improve printk message. Simplify is_timer_block and is_watchdog. Merge acpi_gtdt_desc_init and gtdt_arch_timer_init into acpi_gtdt_init(); Delete __init in include/linux/acpi.h for GTDT API Make ARM64 select GTDT. Delete "#include <linux/module.h>" from acpi_gtdt.c Simplify GT block parse code. v7: https://lkml.org/lkml/2016/7/13/769 Move the GTDT driver to drivers/acpi/arm64 Add add the ARM64-specific ACPI Support maintainers in MAINTAINERS Merge 3 patches of GTDT parser driver. Fix the for_each_platform_timer bug. v6: https://lkml.org/lkml/2016/6/29/580 split the GTDT driver to 4 parts: basic, arch_timer, memory-mapped timer, and SBSA Generic Watchdog timer Improve driver by suggestions and example code from Daniel Lezcano v5: https://lkml.org/lkml/2016/5/24/356 Sorting out all patches, simplify the API of GTDT driver: GTDT driver just fills the data struct for arm_arch_timer driver. v4: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006667.html Delete the kvm relevant patches Separate two patches for sorting out the code for arm_arch_timer. Improve irq info export code to allow missing irq info in GTDT table. v3: https://lkml.org/lkml/2016/2/1/658 Improve GTDT driver code: (1)improve pr_* by defining pr_fmt(fmt) (2)simplify gtdt_sbsa_gwdt_init (3)improve gtdt_arch_timer_data_init, if table is NULL, it will try to get GTDT table. Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr. Add arm_arch_timer get ppi from DT and GTDT support for kvm. v2: https://lkml.org/lkml/2015/12/2/10 Rebase to latest kernel version(4.4-rc3). Fix the bug about the config problem, use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553 Fu Wei (8): clocksource/drivers/arm_arch_timer: Move enums and defines to header file clocksource/drivers/arm_arch_timer: Add a new enum for spi type clocksource/drivers/arm_arch_timer: Improve printk relevant code acpi/arm64: Add GTDT table parse driver clocksource/drivers/arm_arch_timer: Simplify ACPI support code. acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver arch/arm64/Kconfig | 1 + drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/gtdt.c | 309 +++++++++++++++++++++++++++++++++++ drivers/clocksource/Kconfig | 2 +- drivers/clocksource/arm_arch_timer.c | 225 +++++++++++++++++-------- drivers/watchdog/Kconfig | 1 + include/clocksource/arm_arch_timer.h | 32 ++++ include/linux/acpi.h | 7 + 9 files changed, 510 insertions(+), 71 deletions(-) create mode 100644 drivers/acpi/arm64/gtdt.c -- 2.7.4

7 years, 7 months

[PATCH 0/3] [v2] Add basic ACPI support to the Qualcomm Technologies EMAC driver

by Timur Tabi

This patch series adds support to the EMAC driver for extracting addresses, interrupts, and some _DSDs (properties) from ACPI. The first two patches clean up the code, and the third patch adds ACPI-specific functionality. The first patch fixes a bug with handling the platform_device for the internal PHY. This phy is treated as a separate device in both DT and ACPI, but since the platform is not released automatically when the driver unloads, managed functions like devm_ioremap_resource cannot be used. The second patch replaces of_get_mac_address with its platform-independent equivalent device_get_mac_address. The third patch parses the ACPI tables to obtain the platform_device for the primary EMAC node ("QCOM8070") and the internal phy node ("QCOM8071"). Timur Tabi (3): [v2] net: qcom/emac: do not use devm on internal phy pdev [v2] net: qcom/emac: use device_get_mac_address [v2] net: qcom/emac: initial ACPI support drivers/net/ethernet/qualcomm/emac/emac-phy.c | 37 ++++++-- drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 110 ++++++++++++++++++------ drivers/net/ethernet/qualcomm/emac/emac.c | 26 ++++-- 3 files changed, 134 insertions(+), 39 deletions(-) -- Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

7 years, 7 months

[PATCH 1/2] net: qcom/emac: do not use devm on internal phy pdev

by Timur Tabi

The platform_device returned by of_find_device_by_node() is not automatically released when the driver unprobes. Therefore, managed calls like devm_ioremap_resource() should not be used. Instead, we manually allocate the resources and then free them on driver release. Signed-off-by: Timur Tabi <timur(a)codeaurora.org> --- drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 42 +++++++++++++++++++------ drivers/net/ethernet/qualcomm/emac/emac.c | 4 +++ 2 files changed, 37 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c index 9a9a963..2a095fb 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c @@ -681,6 +681,7 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) struct resource *res; const struct of_device_id *match; struct device_node *np; + int ret; np = of_parse_phandle(pdev->dev.of_node, "internal-phy", 0); if (!np) { @@ -697,26 +698,49 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev); if (!match) { dev_err(&pdev->dev, "unrecognized internal phy node\n"); - return -ENODEV; + ret = -ENODEV; + goto error_put_device; } phy->initialize = (emac_sgmii_initialize)match->data; /* Base address is the first address */ res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 0); - phy->base = devm_ioremap_resource(&sgmii_pdev->dev, res); - if (IS_ERR(phy->base)) - return PTR_ERR(phy->base); + phy->base = ioremap(res->start, resource_size(res)); + if (IS_ERR(phy->base)) { + ret = PTR_ERR(phy->base); + goto error_put_device; + } /* v2 SGMII has a per-lane digital digital, so parse it if it exists */ res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 1); if (res) { - phy->digital = devm_ioremap_resource(&sgmii_pdev->dev, res); - if (IS_ERR(phy->base)) - return PTR_ERR(phy->base); - + phy->digital = ioremap(res->start, resource_size(res)); + if (IS_ERR(phy->digital)) { + ret = PTR_ERR(phy->digital); + goto error_unmap_base; + } } - return phy->initialize(adpt); + ret = phy->initialize(adpt); + if (ret) + goto error; + + /* We've remapped the addresses, so we don't need the device any + * more. of_find_device_by_node() says we should release it. + */ + put_device(&sgmii_pdev->dev); + + return 0; + +error: + if (phy->digital) + iounmap(phy->digital); +error_unmap_base: + iounmap(phy->base); +error_put_device: + put_device(&sgmii_pdev->dev); + + return ret; } diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index e47d387..429b4cb 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -723,6 +723,10 @@ static int emac_remove(struct platform_device *pdev) mdiobus_unregister(adpt->mii_bus); free_netdev(netdev); + if (adpt->phy.digital) + iounmap(adpt->phy.digital); + iounmap(adpt->phy.base); + return 0; } -- Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

7 years, 7 months

[PATCH V11 0/8] Introduce ACPI world to ITS irqchip

by Tomasz Nowicki

The series builds the PCI/MSI domain stack based on initial IORT driver which is added in first place. As a reference please see IORT spec: http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remap… Tested on Cavium ThunderX server and Qualcomm Technologies server platform QDF2XXX. The patches can be found here: https://github.com/semihalf-nowicki-tomasz/linux.git (its-acpi-v11) v10 -> v11 - rebased against v4.8-rc6 - bug fix for iort_match_node_callback() error handling - patch 1-2 changelog updates v9 -> v10 - error handling improvements for iort_match_node_callback() but no functional changes - iort.h -> acpi_iort.h header name change - style improvements v8 -> v9 - rebased against v4.8-rc4 - move root IORT pointer validation to one place iort_scan_node() - function names & Kconfig option name improvements - remove annoying dev_err() appearances for non-IORT users - for debug purpose print full ITS resource range v7 -> v8 - rebased against v4.8-rc1 - move IORT support under new drivers/acpi/arm64 directory - memory leak fix for iort_match_node_callback() - iort_node_map_rid() algorithm improvements - fix RID match check in iort_id_map() - fix typos and white spaces v6 -> v7 - rebased against irq/irqchip-4.8 - improvements for IORT ID mapping - call IORT init call from acpi_init() instead of arch_initcall() - split IORT driver in to two parts: core and ITS/MSI v5 -> v6 - added locking mechanism for IORT list with domain token - IORT function name improvements - extended IORT RID mapping helper - reworked IORT to be more SMMU friendly - IORT functions which map RID and find corresponding domain are not PCI specific any more (struct pci_dev -> struct device) - bug fixes v4 -> v5 - rebased against v4.7-rc1 - drop generic layer and call IORT functions directly - improve resource abstraction and string formatting v3 -> v4 - rebased against v4.5 - add ACPI support for IRQ domain handling on a per-device basis - reorder domain setup step - improve error handling - code style improvements v2 -> v3 - rebased on top of 4.4 - fixes and improvements for redistributor init via GICC structures - fixes as per kbuild reports v1 -> v2 - rebased on top of 4.4-rc4 - use pci_msi_domain_get_msi_rid for requester ID to device ID translation Tomasz Nowicki (8): ACPI: I/O Remapping Table (IORT) initial support ACPI: Add new IORT functions to support MSI domain handling PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table irqchip/gicv3-its: Cleanup for ITS domain initialization irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI irqchip/gicv3-its: Probe ITS in the ACPI way irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization drivers/acpi/Kconfig | 4 + drivers/acpi/Makefile | 2 + drivers/acpi/arm64/Kconfig | 6 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/iort.c | 366 +++++++++++++++++++++++++++++++ drivers/acpi/bus.c | 2 + drivers/irqchip/Kconfig | 1 + drivers/irqchip/irq-gic-v3-its-pci-msi.c | 88 ++++++-- drivers/irqchip/irq-gic-v3-its.c | 171 +++++++++++---- drivers/irqchip/irq-gic-v3.c | 7 +- drivers/pci/msi.c | 11 +- include/linux/acpi_iort.h | 42 ++++ include/linux/irqchip/arm-gic-v3.h | 4 +- 13 files changed, 635 insertions(+), 70 deletions(-) create mode 100644 drivers/acpi/arm64/Kconfig create mode 100644 drivers/acpi/arm64/Makefile create mode 100644 drivers/acpi/arm64/iort.c create mode 100644 include/linux/acpi_iort.h -- 1.9.1

7 years, 7 months

find_child_device() on ACPI node works only once

by Timur Tabi

I need help getting my ACPI table parsing code to work correctly. My driver fails to find the child device in a node when the driver is unloaded and reloaded. I suspect that I'm not freeing a resource correctly. Here is my ACPI table (trimmed): Device (MAC0) { Name (_HID, "QCOM8070") Name (_UID, 0) Method (_CRS, 0x0, Serialized) { Name (RBUF, ResourceTemplate() { ... Return (RBUF) } } Device (IPHY) { Name (_HID, "QCOM8071") Method (_CRS, 0x0, Serialized) { Name (RBUF, ResourceTemplate () { ... Return (RBUF) } } So QCOM8071 is a child device for QCOM8070. The driver probes on QCOM8070 and then manually instantiates QCOM8071. static const struct acpi_device_id emac_acpi_match[] = { { .id = "QCOM8070", }, {} }; MODULE_DEVICE_TABLE(acpi, emac_acpi_match); static struct platform_driver emac_platform_driver = { .probe = emac_probe, .remove = emac_remove, .driver = { .name = "qcom-emac", .acpi_match_table = ACPI_PTR(emac_acpi_match), }, }; In emac_probe, I do this: struct device *dev; dev = device_find_child(&pdev->dev, NULL, emac_sgmii_acpi_match); adpt->sgmii_pdev = to_platform_device(dev); And here's emac_sgmii_acpi_match: > static int emac_sgmii_acpi_match(struct device *dev, void *data) > { > static const struct acpi_device_id match_table[] = { > { > .id = "QCOM8071", > }, > {} > }; > const struct acpi_device_id *id = acpi_match_device(match_table, dev); > > return !!id; > } When my driver exits, I call platform_device_unregister(adpt->sgmii_pdev); So here's the problem: the second time my driver is loaded, emac_sgmii_acpi_match() always returns false. The QCOM8071 child node no longer exists. It's apparently hidden in some way. I've been trying for several days to debug this, and I'm at my wits' end. I'm assuming that I'm not freeing the resource properly, but other than calling platform_device_unregister(), what else should I do? -- Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

7 years, 8 months

[PATCH v13 0/8] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Preparation for adding GTDT support in arm_arch_timer: 1. Move some enums and marcos to header file; 2. Add a new enum for spi type; 3. Improve printk relevant code. (2)Introduce ACPI GTDT parser: drivers/acpi/arm64/acpi_gtdt.c Parse all kinds of timer in GTDT table of ACPI:arch timer, memory-mapped timer and SBSA Generic Watchdog timer. This driver can help to simplify all the relevant timer drivers, and separate all the ACPI GTDT knowledge from them. (3)Simplify ACPI code for arm_arch_timer (4)Add GTDT support for ARM memory-mapped timer, also refactor original memory-mapped timer dt support for reusing some common code. This patchset depends on the following patchset: [UPDATE PATCH V11 1/8] ACPI: I/O Remapping Table (IORT) initial support https://lkml.org/lkml/2016/9/12/949 This patchset has been tested on the following platforms: (1)ARM Foundation v8 model Changelog: v13: https://lkml.org/lkml/2016/9/15/ Improve arm_arch_timer code for memory-mapped timer GTDT support, refactor original memory-mapped timer dt support for reusing some common code. v12: https://lkml.org/lkml/2016/9/13/250 Rebase to latest Linux 4.8-rc6 Delete the confusing "skipping" in the error message. V11: https://lkml.org/lkml/2016/9/6/354 Rebase to latest Linux 4.8-rc5 Delete typedef (suggested by checkpatch.pl) V10: https://lkml.org/lkml/2016/7/26/215 Drop the "readq" patch. Rebase to latest Linux 4.7. V9: https://lkml.org/lkml/2016/7/25/345 Improve pr_err message in acpi gtdt driver. Update Commit message for 7/9 shorten the irq mapping function name Improve GTDT driver for memory-mapped timer v8: https://lkml.org/lkml/2016/7/19/660 Improve "pr_fmt(fmt)" definition: add "ACPI" in front of "GTDT", and also improve printk message. Simplify is_timer_block and is_watchdog. Merge acpi_gtdt_desc_init and gtdt_arch_timer_init into acpi_gtdt_init(); Delete __init in include/linux/acpi.h for GTDT API Make ARM64 select GTDT. Delete "#include <linux/module.h>" from acpi_gtdt.c Simplify GT block parse code. v7: https://lkml.org/lkml/2016/7/13/769 Move the GTDT driver to drivers/acpi/arm64 Add add the ARM64-specific ACPI Support maintainers in MAINTAINERS Merge 3 patches of GTDT parser driver. Fix the for_each_platform_timer bug. v6: https://lkml.org/lkml/2016/6/29/580 split the GTDT driver to 4 parts: basic, arch_timer, memory-mapped timer, and SBSA Generic Watchdog timer Improve driver by suggestions and example code from Daniel Lezcano v5: https://lkml.org/lkml/2016/5/24/356 Sorting out all patches, simplify the API of GTDT driver: GTDT driver just fills the data struct for arm_arch_timer driver. v4: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006667.html Delete the kvm relevant patches Separate two patches for sorting out the code for arm_arch_timer. Improve irq info export code to allow missing irq info in GTDT table. v3: https://lkml.org/lkml/2016/2/1/658 Improve GTDT driver code: (1)improve pr_* by defining pr_fmt(fmt) (2)simplify gtdt_sbsa_gwdt_init (3)improve gtdt_arch_timer_data_init, if table is NULL, it will try to get GTDT table. Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr. Add arm_arch_timer get ppi from DT and GTDT support for kvm. v2: https://lkml.org/lkml/2015/12/2/10 Rebase to latest kernel version(4.4-rc3). Fix the bug about the config problem, use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553 Fu Wei (8): clocksource/drivers/arm_arch_timer: Move enums and defines to header file clocksource/drivers/arm_arch_timer: Add a new enum for spi type clocksource/drivers/arm_arch_timer: Improve printk relevant code acpi/arm64: Add GTDT table parse driver clocksource/drivers/arm_arch_timer: Simplify ACPI support code. acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver arch/arm64/Kconfig | 1 + drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/gtdt.c | 309 +++++++++++++++++++++++++++++++++ drivers/clocksource/Kconfig | 2 +- drivers/clocksource/arm_arch_timer.c | 324 +++++++++++++++++++++-------------- drivers/watchdog/Kconfig | 1 + include/clocksource/arm_arch_timer.h | 32 ++++ include/linux/acpi.h | 7 + 9 files changed, 552 insertions(+), 128 deletions(-) create mode 100644 drivers/acpi/arm64/gtdt.c -- 2.7.4

7 years, 8 months

[PATCH v11 0/8] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Preparation for adding GTDT support in arm_arch_timer: 1. Move some enums and marcos to header file; 2. Add a new enum for spi type; 3. Improve printk relevant code. (2)Introduce ACPI GTDT parser: drivers/acpi/arm64/acpi_gtdt.c Parse all kinds of timer in GTDT table of ACPI:arch timer, memory-mapped timer and SBSA Generic Watchdog timer. This driver can help to simplify all the relevant timer drivers, and separate all the ACPI GTDT knowledge from them. (3)Simplify ACPI code for arm_arch_timer (4)Add GTDT support for ARM memory-mapped timer This patchset depends on the following patchset: [PATCH V9 0/8] Introduce ACPI world to ITS irqchip https://lkml.org/lkml/2016/9/5/847 This patchset has been tested on the following platforms: (1)ARM Foundation v8 model Changelog: V11: https://lkml.org/lkml/2016/9/6/ Rebase to latest Linux 4.8-rc5 Delete typedef (suggested by checkpatch.pl) V10: https://lkml.org/lkml/2016/7/26/215 Drop the "readq" patch. Rebase to latest Linux 4.7. V9: https://lkml.org/lkml/2016/7/25/345 Improve pr_err message in acpi gtdt driver. Update Commit message for 7/9 shorten the irq mapping function name Improve GTDT driver for memory-mapped timer v8: https://lkml.org/lkml/2016/7/19/660 Improve "pr_fmt(fmt)" definition: add "ACPI" in front of "GTDT", and also improve printk message. Simplify is_timer_block and is_watchdog. Merge acpi_gtdt_desc_init and gtdt_arch_timer_init into acpi_gtdt_init(); Delete __init in include/linux/acpi.h for GTDT API Make ARM64 select GTDT. Delete "#include <linux/module.h>" from acpi_gtdt.c Simplify GT block parse code. v7: https://lkml.org/lkml/2016/7/13/769 Move the GTDT driver to drivers/acpi/arm64 Add add the ARM64-specific ACPI Support maintainers in MAINTAINERS Merge 3 patches of GTDT parser driver. Fix the for_each_platform_timer bug. v6: https://lkml.org/lkml/2016/6/29/580 split the GTDT driver to 4 parts: basic, arch_timer, memory-mapped timer, and SBSA Generic Watchdog timer Improve driver by suggestions and example code from Daniel Lezcano v5: https://lkml.org/lkml/2016/5/24/356 Sorting out all patches, simplify the API of GTDT driver: GTDT driver just fills the data struct for arm_arch_timer driver. v4: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006667.html Delete the kvm relevant patches Separate two patches for sorting out the code for arm_arch_timer. Improve irq info export code to allow missing irq info in GTDT table. v3: https://lkml.org/lkml/2016/2/1/658 Improve GTDT driver code: (1)improve pr_* by defining pr_fmt(fmt) (2)simplify gtdt_sbsa_gwdt_init (3)improve gtdt_arch_timer_data_init, if table is NULL, it will try to get GTDT table. Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr. Add arm_arch_timer get ppi from DT and GTDT support for kvm. v2: https://lkml.org/lkml/2015/12/2/10 Rebase to latest kernel version(4.4-rc3). Fix the bug about the config problem, use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553 Fu Wei (8): clocksource/drivers/arm_arch_timer: Move enums and defines to header file clocksource/drivers/arm_arch_timer: Add a new enum for spi type clocksource/drivers/arm_arch_timer: Improve printk relevant code acpi/arm64: Add GTDT table parse driver clocksource/drivers/arm_arch_timer: Simplify ACPI support code. acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver arch/arm64/Kconfig | 1 + drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/gtdt.c | 309 +++++++++++++++++++++++++++++++++++ drivers/clocksource/Kconfig | 2 +- drivers/clocksource/arm_arch_timer.c | 225 +++++++++++++++++-------- drivers/watchdog/Kconfig | 1 + include/clocksource/arm_arch_timer.h | 32 ++++ include/linux/acpi.h | 7 + 9 files changed, 510 insertions(+), 71 deletions(-) create mode 100644 drivers/acpi/arm64/gtdt.c -- 2.7.4

7 years, 8 months

← Newer
1
2
3
4
5
6
7
8
...
82
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Linaro-acpi