IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapp...

Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers.

For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point.

Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation

IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table.

Signed-off-by: Tomasz Nowicki tn@semihalf.com Acked-by: Rafael J. Wysocki rjw@rjwysocki.net Reviewed-by: Hanjun Guo hanjun.guo@linaro.org Reviewed-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com --- drivers/acpi/Kconfig | 4 + drivers/acpi/Makefile | 2 + drivers/acpi/arm64/Kconfig | 6 ++ drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/iort.c | 214 ++++++++++++++++++++++++++++++++++++++++++++ drivers/acpi/bus.c | 2 + include/linux/acpi_iort.h | 30 +++++++ 7 files changed, 259 insertions(+) create mode 100644 drivers/acpi/arm64/Kconfig create mode 100644 drivers/acpi/arm64/Makefile create mode 100644 drivers/acpi/arm64/iort.c create mode 100644 include/linux/acpi_iort.h

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 445ce28..d5c0614 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -521,4 +521,8 @@ config ACPI_CONFIGFS userspace. The configurable ACPI groups will be visible under /config/acpi, assuming configfs is mounted under /config.

+if ARM64 +source "drivers/acpi/arm64/Kconfig" +endif + endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 5ae9d85..e5ada78 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -105,3 +105,5 @@ obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o

video-objs += acpi_video.o video_detect.o obj-y += dptf/ + +obj-$(CONFIG_ARM64) += arm64/ diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig new file mode 100644 index 0000000..4616da4 --- /dev/null +++ b/drivers/acpi/arm64/Kconfig @@ -0,0 +1,6 @@ +# +# ACPI Configuration for ARM64 +# + +config ACPI_IORT + bool diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile new file mode 100644 index 0000000..72331f2 --- /dev/null +++ b/drivers/acpi/arm64/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ACPI_IORT) += iort.o diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c new file mode 100644 index 0000000..3eaeb66 --- /dev/null +++ b/drivers/acpi/arm64/iort.c @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2016, Semihalf + * Author: Tomasz Nowicki tn@semihalf.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * This file implements early detection/parsing of I/O mapping + * reported to OS through firmware via I/O Remapping Table (IORT) + * IORT document number: ARM DEN 0049A + */ + +#define pr_fmt(fmt) "ACPI: IORT: " fmt + +#include <linux/acpi_iort.h> +#include <linux/kernel.h> +#include <linux/pci.h> + +typedef acpi_status (*iort_find_node_callback) + (struct acpi_iort_node *node, void *context); + +/* Root pointer to the mapped IORT table */ +static struct acpi_table_header *iort_table; + +static LIST_HEAD(iort_msi_chip_list); +static DEFINE_SPINLOCK(iort_msi_chip_lock); + +static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type, + iort_find_node_callback callback, + void *context) +{ + struct acpi_iort_node *iort_node, *iort_end; + struct acpi_table_iort *iort; + int i; + + if (!iort_table) + return NULL; + + /* Get the first IORT node */ + iort = (struct acpi_table_iort *)iort_table; + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, + iort->node_offset); + iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, + iort_table->length); + + for (i = 0; i < iort->node_count; i++) { + if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND, + "IORT node pointer overflows, bad table!\n")) + return NULL; + + if (iort_node->type == type && + ACPI_SUCCESS(callback(iort_node, context))) + return iort_node; + + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, + iort_node->length); + } + + return NULL; +} + +static acpi_status iort_match_node_callback(struct acpi_iort_node *node, + void *context) +{ + struct device *dev = context; + acpi_status status; + + if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) { + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_device *adev = to_acpi_device_node(dev->fwnode); + struct acpi_iort_named_component *ncomp; + + if (!adev) { + status = AE_NOT_FOUND; + goto out; + } + + status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf); + if (ACPI_FAILURE(status)) { + dev_warn(dev, "Can't get device full path name\n"); + goto out; + } + + ncomp = (struct acpi_iort_named_component *)node->node_data; + status = !strcmp(ncomp->device_name, buf.pointer) ? + AE_OK : AE_NOT_FOUND; + acpi_os_free(buf.pointer); + } else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { + struct acpi_iort_root_complex *pci_rc; + struct pci_bus *bus; + + bus = to_pci_bus(dev); + pci_rc = (struct acpi_iort_root_complex *)node->node_data; + + /* + * It is assumed that PCI segment numbers maps one-to-one + * with root complexes. Each segment number can represent only + * one root complex. + */ + status = pci_rc->pci_segment_number == pci_domain_nr(bus) ? + AE_OK : AE_NOT_FOUND; + } +out: + return status; +} + +static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in, + u32 *rid_out) +{ + /* Single mapping does not care for input id */ + if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { + if (type == ACPI_IORT_NODE_NAMED_COMPONENT || + type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { + *rid_out = map->output_base; + return 0; + } + + pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n", + map, type); + return -ENXIO; + } + + if (rid_in < map->input_base || + (rid_in >= map->input_base + map->id_count)) + return -ENXIO; + + *rid_out = map->output_base + (rid_in - map->input_base); + return 0; +} + +static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node *node, + u32 rid_in, u32 *rid_out, + u8 type) +{ + u32 rid = rid_in; + + /* Parse the ID mapping tree to find specified node type */ + while (node) { + struct acpi_iort_id_mapping *map; + int i; + + if (node->type == type) { + if (rid_out) + *rid_out = rid; + return node; + } + + if (!node->mapping_offset || !node->mapping_count) + goto fail_map; + + map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, + node->mapping_offset); + + /* Firmware bug! */ + if (!map->output_reference) { + pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", + node, node->type); + goto fail_map; + } + + /* Do the RID translation */ + for (i = 0; i < node->mapping_count; i++, map++) { + if (!iort_id_map(map, node->type, rid, &rid)) + break; + } + + if (i == node->mapping_count) + goto fail_map; + + node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, + map->output_reference); + } + +fail_map: + /* Map input RID to output RID unchanged on mapping failure*/ + if (rid_out) + *rid_out = rid_in; + + return NULL; +} + +static struct acpi_iort_node *iort_find_dev_node(struct device *dev) +{ + struct pci_bus *pbus; + + if (!dev_is_pci(dev)) + return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, + iort_match_node_callback, dev); + + /* Find a PCI root bus */ + pbus = to_pci_dev(dev)->bus; + while (!pci_is_root_bus(pbus)) + pbus = pbus->parent; + + return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, + iort_match_node_callback, &pbus->dev); +} + +void __init acpi_iort_init(void) +{ + acpi_status status; + + status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + const char *msg = acpi_format_exception(status); + pr_err("Failed to get table, %s\n", msg); + } +} diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 85b7d07..e56e643 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -36,6 +36,7 @@ #ifdef CONFIG_X86 #include <asm/mpspec.h> #endif +#include <linux/acpi_iort.h> #include <linux/pci.h> #include <acpi/apei.h> #include <linux/dmi.h> @@ -1186,6 +1187,7 @@ static int __init acpi_init(void) }

pci_mmcfg_late_init(); + acpi_iort_init(); acpi_scan_init(); acpi_ec_init(); acpi_debugfs_init(); diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h new file mode 100644 index 0000000..fcacaf7 --- /dev/null +++ b/include/linux/acpi_iort.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2016, Semihalf + * Author: Tomasz Nowicki tn@semihalf.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef __ACPI_IORT_H__ +#define __ACPI_IORT_H__ + +#include <linux/acpi.h> + +#ifdef CONFIG_ACPI_IORT +void acpi_iort_init(void); +#else +static inline void acpi_iort_init(void) { } +#endif + +#endif /* __ACPI_IORT_H__ */

For ITS, MSI functionality consists on building domain stack and during that process we need to reference to domain stack components e.g. before we create new DOMAIN_BUS_PCI_MSI domain we need to specify its DOMAIN_BUS_NEXUS parent domain. In order to manage that process properly, maintain list which elements contain domain token (unique for MSI domain stack) and ITS ID: iort_register_domain_token() and iort_deregister_domain_token(). Then retrieve domain token any time later with ITS ID being key off: iort_find_domain_token(). With domain token and domain type we are able to find corresponding IRQ domain.

Since IORT is prepared to describe MSI domain on a per-device basis, use existing IORT helpers and implement two calls: 1. iort_msi_map_rid() to map MSI RID for a device 2. iort_get_device_domain() to find domain token for a device

Signed-off-by: Tomasz Nowicki tn@semihalf.com Acked-by: Rafael J. Wysocki rjw@rjwysocki.net Reviewed-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/acpi/arm64/iort.c | 152 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/acpi_iort.h | 12 ++++ 2 files changed, 164 insertions(+)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index 3eaeb66..c669fdab 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -22,6 +22,12 @@ #include <linux/kernel.h> #include <linux/pci.h>

+struct iort_its_msi_chip { + struct list_head list; + struct fwnode_handle *fw_node; + u32 translation_id; +}; + typedef acpi_status (*iort_find_node_callback) (struct acpi_iort_node *node, void *context);

@@ -31,6 +37,76 @@ static struct acpi_table_header *iort_table; static LIST_HEAD(iort_msi_chip_list); static DEFINE_SPINLOCK(iort_msi_chip_lock);

+/** + * iort_register_domain_token() - register domain token and related ITS ID + * to the list from where we can get it back later on. + * @trans_id: ITS ID. + * @fw_node: Domain token. + * + * Returns: 0 on success, -ENOMEM if no memory when allocating list element + */ +int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node) +{ + struct iort_its_msi_chip *its_msi_chip; + + its_msi_chip = kzalloc(sizeof(*its_msi_chip), GFP_KERNEL); + if (!its_msi_chip) + return -ENOMEM; + + its_msi_chip->fw_node = fw_node; + its_msi_chip->translation_id = trans_id; + + spin_lock(&iort_msi_chip_lock); + list_add(&its_msi_chip->list, &iort_msi_chip_list); + spin_unlock(&iort_msi_chip_lock); + + return 0; +} + +/** + * iort_deregister_domain_token() - Deregister domain token based on ITS ID + * @trans_id: ITS ID. + * + * Returns: none. + */ +void iort_deregister_domain_token(int trans_id) +{ + struct iort_its_msi_chip *its_msi_chip, *t; + + spin_lock(&iort_msi_chip_lock); + list_for_each_entry_safe(its_msi_chip, t, &iort_msi_chip_list, list) { + if (its_msi_chip->translation_id == trans_id) { + list_del(&its_msi_chip->list); + kfree(its_msi_chip); + break; + } + } + spin_unlock(&iort_msi_chip_lock); +} + +/** + * iort_find_domain_token() - Find domain token based on given ITS ID + * @trans_id: ITS ID. + * + * Returns: domain token when find on the list, NULL otherwise + */ +struct fwnode_handle *iort_find_domain_token(int trans_id) +{ + struct fwnode_handle *fw_node = NULL; + struct iort_its_msi_chip *its_msi_chip; + + spin_lock(&iort_msi_chip_lock); + list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) { + if (its_msi_chip->translation_id == trans_id) { + fw_node = its_msi_chip->fw_node; + break; + } + } + spin_unlock(&iort_msi_chip_lock); + + return fw_node; +} + static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type, iort_find_node_callback callback, void *context) @@ -202,6 +278,82 @@ static struct acpi_iort_node *iort_find_dev_node(struct device *dev) iort_match_node_callback, &pbus->dev); }

+/** + * iort_msi_map_rid() - Map a MSI requester ID for a device + * @dev: The device for which the mapping is to be done. + * @req_id: The device requester ID. + * + * Returns: mapped MSI RID on success, input requester ID otherwise + */ +u32 iort_msi_map_rid(struct device *dev, u32 req_id) +{ + struct acpi_iort_node *node; + u32 dev_id; + + node = iort_find_dev_node(dev); + if (!node) + return req_id; + + iort_node_map_rid(node, req_id, &dev_id, ACPI_IORT_NODE_ITS_GROUP); + return dev_id; +} + +/** + * iort_dev_find_its_id() - Find the ITS identifier for a device + * @dev: The device. + * @idx: Index of the ITS identifier list. + * @its_id: ITS identifier. + * + * Returns: 0 on success, appropriate error value otherwise + */ +static int iort_dev_find_its_id(struct device *dev, u32 req_id, + unsigned int idx, int *its_id) +{ + struct acpi_iort_its_group *its; + struct acpi_iort_node *node; + + node = iort_find_dev_node(dev); + if (!node) + return -ENXIO; + + node = iort_node_map_rid(node, req_id, NULL, ACPI_IORT_NODE_ITS_GROUP); + if (!node) + return -ENXIO; + + /* Move to ITS specific data */ + its = (struct acpi_iort_its_group *)node->node_data; + if (idx > its->its_count) { + dev_err(dev, "requested ITS ID index [%d] is greater than available [%d]\n", + idx, its->its_count); + return -ENXIO; + } + + *its_id = its->identifiers[idx]; + return 0; +} + +/** + * iort_get_device_domain() - Find MSI domain related to a device + * @dev: The device. + * @req_id: Requester ID for the device. + * + * Returns: the MSI domain for this device, NULL otherwise + */ +struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id) +{ + struct fwnode_handle *handle; + int its_id; + + if (iort_dev_find_its_id(dev, req_id, 0, &its_id)) + return NULL; + + handle = iort_find_domain_token(its_id); + if (!handle) + return NULL; + + return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI); +} + void __init acpi_iort_init(void) { acpi_status status; diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h index fcacaf7..0e32dac 100644 --- a/include/linux/acpi_iort.h +++ b/include/linux/acpi_iort.h @@ -20,11 +20,23 @@ #define __ACPI_IORT_H__

#include <linux/acpi.h> +#include <linux/fwnode.h> +#include <linux/irqdomain.h>

+int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node); +void iort_deregister_domain_token(int trans_id); +struct fwnode_handle *iort_find_domain_token(int trans_id); #ifdef CONFIG_ACPI_IORT void acpi_iort_init(void); +u32 iort_msi_map_rid(struct device *dev, u32 req_id); +struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id); #else static inline void acpi_iort_init(void) { } +static inline u32 iort_msi_map_rid(struct device *dev, u32 req_id) +{ return req_id; } +static inline struct irq_domain *iort_get_device_domain(struct device *dev, + u32 req_id) +{ return NULL; } #endif

#endif /* __ACPI_IORT_H__ */

There is no point to initialize ITS without having msi-controller property in corresponding DT node. However, its_probe is checking msi-controller presence at the end, so we can save our time and do that check prior to its_probe call. Also, for the code clarity purpose, we put domain initialization to separate function.

Signed-off-by: Tomasz Nowicki tn@semihalf.com Acked-by: Marc Zyngier marc.zyngier@arm.com Reviewed-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/irqchip/irq-gic-v3-its.c | 57 ++++++++++++++++++++++++---------------- 1 file changed, 34 insertions(+), 23 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 36b9c28..943442d 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -1614,13 +1614,37 @@ static void its_enable_quirks(struct its_node *its) gic_enable_quirks(iidr, its_quirks, its); }

+static int its_init_domain(struct device_node *node, struct its_node *its, + struct irq_domain *parent) +{ + struct irq_domain *inner_domain; + struct msi_domain_info *info; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + inner_domain = irq_domain_add_tree(node, &its_domain_ops, its); + if (!inner_domain) { + kfree(info); + return -ENOMEM; + } + + inner_domain->parent = parent; + inner_domain->bus_token = DOMAIN_BUS_NEXUS; + info->ops = &its_msi_domain_ops; + info->data = its; + inner_domain->host_data = info; + + return 0; +} + static int __init its_probe(struct device_node *node, struct irq_domain *parent) { struct resource res; struct its_node *its; void __iomem *its_base; - struct irq_domain *inner_domain; u32 val; u64 baser, tmp; int err; @@ -1712,28 +1736,9 @@ static int __init its_probe(struct device_node *node, writeq_relaxed(0, its->base + GITS_CWRITER); writel_relaxed(GITS_CTLR_ENABLE, its->base + GITS_CTLR);

- if (of_property_read_bool(node, "msi-controller")) { - struct msi_domain_info *info; - - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (!info) { - err = -ENOMEM; - goto out_free_tables; - } - - inner_domain = irq_domain_add_tree(node, &its_domain_ops, its); - if (!inner_domain) { - err = -ENOMEM; - kfree(info); - goto out_free_tables; - } - - inner_domain->parent = parent; - inner_domain->bus_token = DOMAIN_BUS_NEXUS; - info->ops = &its_msi_domain_ops; - info->data = its; - inner_domain->host_data = info; - } + err = its_init_domain(node, its, parent); + if (err) + goto out_free_tables;

spin_lock(&its_lock); list_add(&its->entry, &its_nodes); @@ -1784,6 +1789,12 @@ int __init its_init(struct device_node *node, struct rdists *rdists,

for (np = of_find_matching_node(node, its_device_id); np; np = of_find_matching_node(np, its_device_id)) { + if (!of_property_read_bool(np, "msi-controller")) { + pr_warn("%s: no msi-controller property, ITS ignored\n", + np->full_name); + continue; + } + its_probe(np, parent_domain); }

ITS is prepared for being initialized different than DT, therefore we can initialize it in ACPI way. We collect register base address from MADT table and pass mandatory info to firmware-agnostic ITS init call.

Use here IORT lib to register ITS domain which then can be found and used on to build another PCI MSI domain in hierarchical stack domain.

NOTE: Waiting for proper ITS and NUMA node relation description in IORT table, we pass around NUMA_NO_NODE to the its_probe_one init call. This means that Cavium ThunderX erratum 23144 (pass1.1 only) is not supported for ACPI boot method yet.

Signed-off-by: Tomasz Nowicki tn@semihalf.com Acked-by: Marc Zyngier marc.zyngier@arm.com Reviewed-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/irqchip/Kconfig | 1 + drivers/irqchip/irq-gic-v3-its.c | 61 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 7f87289..9aeea1d 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -39,6 +39,7 @@ config ARM_GIC_V3_ITS bool depends on PCI depends on PCI_MSI + select ACPI_IORT if ACPI

config ARM_NVIC bool diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index c7518c7..35c851c 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -15,10 +15,13 @@ * along with this program. If not, see http://www.gnu.org/licenses/. */

+#include <linux/acpi.h> #include <linux/bitmap.h> #include <linux/cpu.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/irqdomain.h> +#include <linux/acpi_iort.h> #include <linux/log2.h> #include <linux/mm.h> #include <linux/msi.h> @@ -1438,6 +1441,11 @@ static int its_irq_gic_domain_alloc(struct irq_domain *domain, fwspec.param[0] = GIC_IRQ_TYPE_LPI; fwspec.param[1] = hwirq; fwspec.param[2] = IRQ_TYPE_EDGE_RISING; + } else if (is_fwnode_irqchip(domain->parent->fwnode)) { + fwspec.fwnode = domain->parent->fwnode; + fwspec.param_count = 2; + fwspec.param[0] = hwirq; + fwspec.param[1] = IRQ_TYPE_EDGE_RISING; } else { return -EINVAL; } @@ -1797,6 +1805,57 @@ static int __init its_of_probe(struct device_node *node) return 0; }

+#ifdef CONFIG_ACPI + +#define ACPI_GICV3_ITS_MEM_SIZE (SZ_128K) + +static int __init gic_acpi_parse_madt_its(struct acpi_subtable_header *header, + const unsigned long end) +{ + struct acpi_madt_generic_translator *its_entry; + struct fwnode_handle *dom_handle; + struct resource res; + int err; + + its_entry = (struct acpi_madt_generic_translator *)header; + memset(&res, 0, sizeof(res)); + res.start = its_entry->base_address; + res.end = its_entry->base_address + ACPI_GICV3_ITS_MEM_SIZE - 1; + res.flags = IORESOURCE_MEM; + + dom_handle = irq_domain_alloc_fwnode((void *)its_entry->base_address); + if (!dom_handle) { + pr_err("ITS@%pa: Unable to allocate GICv3 ITS domain token\n", + &res.start); + return -ENOMEM; + } + + err = iort_register_domain_token(its_entry->translation_id, dom_handle); + if (err) { + pr_err("ITS@%pa: Unable to register GICv3 ITS domain token (ITS ID %d) to IORT\n", + &res.start, its_entry->translation_id); + goto dom_err; + } + + err = its_probe_one(&res, dom_handle, NUMA_NO_NODE); + if (!err) + return 0; + + iort_deregister_domain_token(its_entry->translation_id); +dom_err: + irq_domain_free_fwnode(dom_handle); + return err; +} + +static void __init its_acpi_probe(void) +{ + acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR, + gic_acpi_parse_madt_its, 0); +} +#else +static void __init its_acpi_probe(void) { } +#endif + int __init its_init(struct fwnode_handle *handle, struct rdists *rdists, struct irq_domain *parent_domain) { @@ -1807,7 +1866,7 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists, if (of_node) its_of_probe(of_node); else - return -ENODEV; + its_acpi_probe();

if (list_empty(&its_nodes)) { pr_warn("ITS: No ITS available, not enabling LPIs\n");

Let ACPI build ITS PCI MSI domain. ACPI code is responsible for retrieving inner domain token and passing it on to its_pci_msi_init_one generic init call.

IORT maintains list of registered domain tokens and allows to find corresponding domain based on MADT ITS subtable ID info.

Signed-off-by: Tomasz Nowicki tn@semihalf.com Acked-by: Marc Zyngier marc.zyngier@arm.com Reviewed-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/irqchip/irq-gic-v3-its-pci-msi.c | 44 ++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3-its-pci-msi.c b/drivers/irqchip/irq-gic-v3-its-pci-msi.c index d2c2496..aee1c60 100644 --- a/drivers/irqchip/irq-gic-v3-its-pci-msi.c +++ b/drivers/irqchip/irq-gic-v3-its-pci-msi.c @@ -15,6 +15,7 @@ * along with this program. If not, see http://www.gnu.org/licenses/. */

+#include <linux/acpi_iort.h> #include <linux/msi.h> #include <linux/of.h> #include <linux/of_irq.h> @@ -144,9 +145,52 @@ static int __init its_pci_of_msi_init(void) return 0; }

+#ifdef CONFIG_ACPI + +static int __init +its_pci_msi_parse_madt(struct acpi_subtable_header *header, + const unsigned long end) +{ + struct acpi_madt_generic_translator *its_entry; + struct fwnode_handle *dom_handle; + const char *node_name; + int err = -ENXIO; + + its_entry = (struct acpi_madt_generic_translator *)header; + node_name = kasprintf(GFP_KERNEL, "ITS@0x%lx", + (long)its_entry->base_address); + dom_handle = iort_find_domain_token(its_entry->translation_id); + if (!dom_handle) { + pr_err("%s: Unable to locate ITS domain handle\n", node_name); + goto out; + } + + err = its_pci_msi_init_one(dom_handle, node_name); + if (!err) + pr_info("PCI/MSI: %s domain created\n", node_name); + +out: + kfree(node_name); + return err; +} + +static int __init its_pci_acpi_msi_init(void) +{ + acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR, + its_pci_msi_parse_madt, 0); + return 0; +} +#else +static int __init its_pci_acpi_msi_init(void) +{ + return 0; +} +#endif + static int __init its_pci_msi_init(void) { its_pci_of_msi_init(); + its_pci_acpi_msi_init();

return 0; }