From: Fu Wei fu.wei@linaro.org
This patchset: (1)Introduce Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt for FDT info of SBSA Generic Watchdog, and give two examples of adding SBSA Generic Watchdog device node into the dts files: foundation-v8.dts and amd-seattle-soc.dtsi.
(2)Introduce ARM SBSA watchdog driver: a.Use linux kernel watchdog framework; b.Work with FDT on ARM64; c.Support getting timeout from parameter and FDT at the driver init stage. d.The driver works in two modes: (1) single stage timeout (ignore WS0 interrupt) (2) two stages timeout (register WS0 interrupt, do panic in routine) e.User can config working mode by module parameter "action".
This patchset has been tested with watchdog daemon (ACPI/FDT, module/build-in) on the following platforms: (1)ARM Foundation v8 model (2)AMD Seattle platform
This patchset has been tested with kdump successfully.
Changelog: v13:Fix a dev_warn message typo"signle"-->"single" Add MODULE_ALIAS Add more *ed-by in commit message.
v12:https://lkml.org/lkml/2016/2/16/154 Fix a dev_warn message typo"fall"--"falling" Remove unnecessary "status" in dts Add more *ed-by in commit message.
v11:https://lkml.org/lkml/2016/2/9/577 Merge patch 4 and 5. Improve some comments. The driver works in two modes, it's configured by "action"(instead of panic_enabled). Improve the initialization of the timeout limits. Feeding dog by writing "0" to WRR.
v10:https://lkml.org/lkml/2016/2/3/817 Delete pretimeout support. Separate the driver to two parts: (1) single stage timeout driver(ignore WS0 interrupt); (2) register WS0 interrupt for the half timeout panic. timeout == (enable --> WS1).
v9: https://lkml.org/lkml/2015/11/9/57 Rebase to latest kernel version(4.3). Update the Documentation of sbsa-gwdt device node info of FDT: (1) move some introduction to pretimeout patch (2) delete WS1 value from "interrupts" of binding documentation, since WS1 won't be handled by Linux.
v8: https://lkml.org/lkml/2015/10/27/466 Rebase to latest kernel version(4.3-rc7). Separate the patches of GTDT support and arm_arch_timer. This clocksource relevant patch will upstreamed in a individual patchset. Update all the default timeout and pretimeout to 30s and 60s. Improve documentation and inline comments. Fix a bug in pretimeout support which makes timeout and pretimeout parameters initialization fail.
v7: https://lkml.org/lkml/2015/8/24/611 Rebase to latest kernel version(4.2-rc7). Improve FDT support: geting resource by order, instead of name. According to the FDT support, Update the example dts file, gtdt.c and sbsa_gwdt.c. Pass the sparse test, and fix the warning. Fix the max_pretimeout and max_timeout value overflow bug. Delete the WCV output value.
v6: https://lkml.org/lkml/2015/6/23/359 Improve the dtb example files: reduce the register frame size to 4K. Improve pretimeout support: (1) improve watchdog_init_timeouts function (2) rename watchdog_check_min_max_timeouts back to the original name (1) improve watchdog_timeout_invalid/watchdog_pretimeout_invalid Add the new features in the sbsa_gwdt driver: (1) In the second stage, user can feed the dog without cleaning WS0. (2) In the second stage, user can trigger WS1 by setting pretimeout = 0. (3) expand the max value of pretimeout, in case 10 second is not enough for a kdump kernel reboot in panic.
v5: https://lkml.org/lkml/2015/6/10/357 Improve pretimeout support: (1)fix typo in documentation and comments. (2)fix the timeout limits validation bug. Simplify sbsa_gwdt driver: (1)integrate all the registers access functions into caller.
v4: https://lkml.org/lkml/2015/6/2/4 Refactor GTDT support code: remove it from arch/arm64/kernel/acpi.c, put it into drivers/acpi/gtdt.c file. Integrate the GTDT code of drivers/clocksource/arm_arch_timer.c into drivers/acpi/gtdt.c. Improve pretimeout support, fix "pretimeout == 0" problem. Simplify sbsa_gwdt driver: (1)timeout/pretimeout limits setup; (2)keepalive function; (3)delete "clk == 0" check; (4)delete WS0 status bit check in interrupt routine; (5)sbsa_gwdt_set_wcv function.
v3: https://lkml.org/lkml/2015/5/25/111 Delete "export arch_timer_get_rate" patch. Driver back to use arch_timer_get_cntfrq. Improve watchdog_init_timeouts function and update relevant documentation. Improve watchdog_timeout_invalid and watchdog_pretimeout_invalid. Improve foundation-v8.dts: delete the unnecessary tag of device node. Remove "ARM64 || COMPILE_TEST" from Kconfig. Add comments in arch/arm64/kernel/acpi.c Fix typoes and incorrect comments.
v2: https://lkml.org/lkml/2015/5/21/172 Improve watchdog-kernel-api.txt documentation for pretimeout support. Export "arch_timer_get_rate" in arm_arch_timer.c. Add watchdog_init_timeouts API for pretimeout support in framework. Improve suspend and resume foundation in driver Improve timeout/pretimeout values init code in driver. Delete unnecessary items of the sbsa_gwdt struct and #define. Delete all unnecessary debug info in driver. Fix 64bit division bug. Use the arch_timer interface to get watchdog clock rate. Add MODULE_DEVICE_TABLE for platform device id. Fix typoes.
v1: https://lkml.org/lkml/2015/5/15/279 The first version upstream patchset to linux mailing list.
Fu Wei (4): Documentation: add sbsa-gwdt driver documentation ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi Watchdog: introduce ARM SBSA watchdog driver
.../devicetree/bindings/watchdog/sbsa-gwdt.txt | 31 ++ Documentation/watchdog/watchdog-parameters.txt | 7 + arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 8 + arch/arm64/boot/dts/arm/foundation-v8.dts | 7 + drivers/watchdog/Kconfig | 20 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sbsa_gwdt.c | 404 +++++++++++++++++++++ 7 files changed, 478 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt create mode 100644 drivers/watchdog/sbsa_gwdt.c