Hello,
Apologies in advance for a lengthy cover letter. Hopefully it has all the required information so you dont need to read the ACPI spec. ;)
This patchset introduces the ideas behind CPPC (Collaborative Processor Performance Control) and implements support for controlling CPU performance using the existing PID (Proportional-Integral-Derivative) controller (from intel_pstate.c) and some CPPC semantics.
The patchwork is not a final proposal of the CPPC implementation. I've had to hack some sections due to lack of hardware, details of which are in the Testing section.
There are several bits of information which are needed in order to make CPPC work great on Linux based platforms and I'm hoping to start a wider discussion on how to address the missing bits. The following sections briefly introduce CPPC and later highlight the information which is missing.
More importantly, I'm also looking for ideas on how to support CPPC in the short term, given that we will soon be seeing products based on ARM64 and X86 which support CPPC.[1] Although we may not have all the information, we could make it work with existing governors in a way this patchset demonstrates. Hopefully, this approach is acceptable for mainline inclusion in the short term.
Finer details about the CPPC spec are available in the latest ACPI 5.1 specification.[2]
If these issues are being discussed on some other thread or elsewhere, or if someone is already working on it, please let me know. Also, please correct me if I have misunderstood anything.
What is CPPC: =============
CPPC is the new interface for CPU performance control between the OS and the platform defined in ACPI 5.0+. The interface is built on an abstract representation of CPU performance rather than raw frequency. Basic operation consists of:
* Platform enumerates supported performance range to OS
* OS requests desired performance level over some time window along with min and max instantaneous limits
* Platform is free to optimize power/performance within bounds provided by OS
* Platform provides telemetry back to OS on delivered performance
Communication with the OS is abstracted via another ACPI construct called Platform Communication Channel (PCC) which is essentially a generic shared memory channel with doorbell interrupts going back and forth. This abstraction allows the “platform” for CPPC to be a variety of different entities – driver, firmware, BMC, etc.
CPPC describes the following registers:
* HighestPerformance: (read from platform)
Indicates the highest level of performance the processor is theoretically capable of achieving, given ideal operating conditions.
* Nominal Performance: (read from platform)
Indicates the highest sustained performance level of the processor. This is the highest operating performance level the CPU is expected to deliver continuously.
* LowestNonlinearPerformance: (read from platform)
Indicates the lowest performance level of the processor with non- linear power savings.
* LowestPerformance: (read from platform)
Indicates the lowest performance level of the processor.
* GuaranteedPerformanceRegister: (read from platform)
Optional. If supported, contains register to read the current guaranteed performance from. This is current max sustained performance of the CPU taking into account all budgeting constraints. This can change at runtime and is notified to the OS via ACPI notification mechanisms.
* DesiredPerformanceRegister: (write to platform)
Register to write desired performance level from the OS.
* MinimumPerformanceRegister: (write to platform)
Optional. This is the min allowable performance as requested by the OS.
* MaximumPerformanceRegister: (write to platform)
Optional. This is the max allowable performance as requested by the OS.
* PerformanceReductionToleranceRegister (write to platform)
Optional. This is the deviation below the desired perf value as requested by the OS. If the Time window register(below) is supported, then this value is the min performance on average over the time window that the OS desires.
* TimeWindowRegister: (write to platform) Optional. The OS requests desired performance over this time window.
* CounterWraparoundTime: (read from platform) Optional. Min time before the performance counters wrap around.
* ReferencePerformanceCounterRegister: (read from platform)
A counter that increments proportionally to the reference performance of the processor.
* DeliveredPerformanceCounterRegister: (read from platform)
Delivered perf = reference perf * delta(delivered perf ctr)/delta(ref perf ctr)
* PerformanceLimitedRegister: (read from platform)
This is set by the platform in the event that it has to limit available performance due to thermal or budgeting constraints.
* CPPCEnableRegister: (read/write from platform)
Enable/disable CPPC
* AutonomousSelectionEnable:
Platform decides CPU performance level w/o OS assist.
* AutonomousActivityWindowRegister:
This influences the increase or decrease in cpu performance of the platforms autonomous selection policy.
* EnergyPerformancePreferenceRegister:
Provides a energy or perf bias hint to the platform when in autonomous mode.
* Reference Performance: (read from platform)
Indicates the rate at which the reference counter increments.
Whats missing in CPPC: =====================
Currently CPPC makes no mention of power. However, this could be added in future versions of the spec. e.g. although CPPC works off of a continuous range of CPU perf levels, we could discretize the scale such that we only extract points where the power level changes substantially between CPU perf levels and export this information to the scheduler.
Whats missing in the kernel: ============================
We may have some of this information in the scheduler, but I couldn't see a good way to extract it for CPPC yet.
(1) An intelligent way to provide a min/max bound and a desired value for CPU performance.
(2) A timing window for the platform to deliver requested performance within bounds. This could be a kind of sampling interval between consecutive reads of delivered cpu performance.
(3) Centralized decision making by any CPU in a freq domain for all its siblings.
The last point needs some elaboration:
I see that the CPUfreq layer allows defining "related CPUs" and that we can have the same policy for CPUs in the same freq domain and one governor per policy. However, from what I could tell, there are at least 2 baked in assumptions in this layer which break things at least for platforms like ARM (Please correct me if I'm wrong!)
(a) All CPUs run at the exact same max, min and cur freq.
(b) Any CPU always gets exactly the freq it asked for.
So, although the CPUFreq layer is capable of making somewhat centralized cpufreq decisions for CPUs under the same policy, it seems to be deciding things under the wrong/inapplicable assumptions. Moreover only one CPU is in charge of policy handling at a time and the policy handling is shifted to another CPU in the domain, only if the former CPU is hotplugged out.
Not having a proper centralized decision maker adversely affects power saving possibilities in platforms that can't distinguish when a CPU requests a specific freq and then goes to sleep. This potentially has the effect of keeping other CPUs in the domain running at a much higher frequency than required, while the initial requester is deep asleep.
So, for point (3), I'm not sure which path we should take among the following:
(I) Fix cpufreq layer and add CPPC support as a cpufreq_driver. (a) Change every call to get freq to make it read h/w registers and then snap value back to freq table. This way, cpufreq can keep its idea of freq current. However, this may end up waking CPUs to read counters, unless they are mem mapped. (b) Allow any CPU in the "related_cpus" mask to make policy decisions on behalf of siblings. So the policy maker switching is not tied to hotplug.
(II) Not touch CPUfreq and use the PID algorithm instead, but change the busyness calculation to accumulate busyness values from all CPUs in common domain. Requires implementation of domain awareness.
(III) Address these issues in the upcoming CPUfreq/CPUidle integration layer(?)
(IV) Handle it in the platform or lose out. I understand this has some potential for adding latency to cpu freq requests so it may not be possible for all platforms.
(V) ..?
For points (1) and (2), the long term solution IMHO is to work it out along with the scheduler CPUFreq/CPUidle integration. But its not clear to me what would be the best short term approach. I'd greatly appreciate any suggestions/comments. If anyone is already working on these issues, please CC me as well.
Test setup: ==========
For the sake of experiments, I used the Thinkpad x240 laptop, which advertises CPPC tables in its ACPI firmware. The PCC and CPPC drivers included in this patchset are able to parse the tables and get all the required addresses. However, it seems that this laptop doesn't implement PCC doorbell and the firmware side of CPPC. The PCC doorbell calls would just wait forever. Not sure whats going on there. So, I had to hack it and emulate what the platform would've done to some extent.
I extracted the PID algo from intel_pstate.c and modified it with CPPC function wrappers. It shouldn't be hard to replace PID with anything else we think is suitable. In the long term, I hope we can make CPPC calls directly from the scheduler.
There are two versions of the low level CPPC accessors. The one included in the patchset is how I'd imagine it would work with platforms that completely implement CPPC in firmware.
The other version is here [5]. This should help with DT or platforms with broken firmware, enablement purposes etc.
I ran a simple kernel compilation with intel_pstate.c and the CPPC modified version as the governors and saw no real difference in compile times. So no new overheads added. I verified that CPU freq requests were taken by reading out the PERF_STATUS register.
[1] - See the HWP section 14.4 http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32... [2] - http://www.uefi.org/sites/default/files/resources/ACPI_5_1release.pdf [3] - https://plus.google.com/+TheodoreTso/posts/2vEekAsG2QT [4] - https://plus.google.com/+ArjanvandeVen/posts/dLn9T4ehywL [5] - http://git.linaro.org/people/ashwin.chaugule/leg-kernel.git/blob/236d901d31f...
Ashwin Chaugule (3): ACPI: Add support for Platform Communication Channel CPPC: Add support for Collaborative Processor Performance Control CPPC: Add ACPI accessors to CPC registers
drivers/acpi/Kconfig | 10 + drivers/acpi/Makefile | 1 + drivers/acpi/pcc.c | 301 +++++++++++++++ drivers/cpufreq/Kconfig | 19 + drivers/cpufreq/Makefile | 2 + drivers/cpufreq/cppc.c | 874 ++++++++++++++++++++++++++++++++++++++++++++ drivers/cpufreq/cppc.h | 181 +++++++++ drivers/cpufreq/cppc_acpi.c | 80 ++++ 8 files changed, 1468 insertions(+) create mode 100644 drivers/acpi/pcc.c create mode 100644 drivers/cpufreq/cppc.c create mode 100644 drivers/cpufreq/cppc.h create mode 100644 drivers/cpufreq/cppc_acpi.c