Tidy the file a bit by removing unused paths. Also removed unused kernel options that do not currently make sense on arm/arm64
Signed-off-by: Graeme Gregory graeme.gregory@linaro.org --- drivers/acpi/plat/arm/boot.c | 115 ++----------------------------------------- 1 file changed, 5 insertions(+), 110 deletions(-)
diff --git a/drivers/acpi/plat/arm/boot.c b/drivers/acpi/plat/arm/boot.c index 8600cd0..881478d 100644 --- a/drivers/acpi/plat/arm/boot.c +++ b/drivers/acpi/plat/arm/boot.c @@ -24,9 +24,6 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-/* - * BOZO: this needs to be done right.... - */ #include <linux/init.h> #include <linux/acpi.h> #include <linux/acpi_pmtmr.h> @@ -46,8 +43,12 @@ #include <asm/smp.h> #include <asm/acpi.h>
-static int __initdata acpi_force; +/* + * We never plad to use RSDT on arm/arm64 as its deprecated in spec but this + * variable is still required by the ACPI core + */ u32 acpi_rsdt_forced; + int acpi_disabled; EXPORT_SYMBOL(acpi_disabled);
@@ -223,56 +224,6 @@ acpi_parse_gic_distributor(struct acpi_subtable_header *header, return 0; }
-/* - * acpi_pic_sci_set_trigger() - * - * use ELCR to set PIC-mode trigger type for SCI - * - * If a PIC-mode SCI is not recognized or gives spurious IRQ7's - * it may require Edge Trigger -- use "acpi_sci=edge" - * - * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers - * for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge. - * ECLR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0) - * ECLR2 is IRQs 8-15 (IRQ 8, 13 must be 0) - */ - -void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) -{ - unsigned int mask = 1 << irq; - unsigned int old, new; - - /* Real old ELCR mask */ - old = inb(0x4d0) | (inb(0x4d1) << 8); - - /* - * If we use ACPI to set PCI IRQs, then we should clear ELCR - * since we will set it correctly as we enable the PCI irq - * routing. - */ - new = acpi_noirq ? old : 0; - - /* - * Update SCI information in the ELCR, it isn't in the PCI - * routing tables.. - */ - switch (trigger) { - case 1: /* Edge - clear */ - new &= ~mask; - break; - case 3: /* Level - set */ - new |= mask; - break; - } - - if (old == new) - return; - - printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old); - outb(new, 0x4d0); - outb(new >> 8, 0x4d1); -} - int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { *irq = gsi_to_irq(gsi); @@ -812,70 +763,14 @@ static int __init parse_acpi(char *arg) if (strcmp(arg, "off") == 0) { disable_acpi(); } - /* acpi=force to over-ride black-list */ - else if (strcmp(arg, "force") == 0) { - acpi_force = 1; - acpi_disabled = 0; - } /* acpi=strict disables out-of-spec workarounds */ else if (strcmp(arg, "strict") == 0) { acpi_strict = 1; } - /* acpi=rsdt use RSDT instead of XSDT */ - else if (strcmp(arg, "rsdt") == 0) { - acpi_rsdt_forced = 1; - } - /* "acpi=noirq" disables ACPI interrupt routing */ - else if (strcmp(arg, "noirq") == 0) { - acpi_noirq_set(); - } - /* "acpi=copy_dsdt" copys DSDT */ - else if (strcmp(arg, "copy_dsdt") == 0) { - acpi_gbl_copy_dsdt_locally = 1; - } else { - /* Core will printk when we return error. */ - return -EINVAL; - } return 0; } early_param("acpi", parse_acpi);
-/* FIXME: Using pci= for an ACPI parameter is a travesty. */ -static int __init parse_pci(char *arg) -{ - if (arg && strcmp(arg, "noacpi") == 0) - acpi_disable_pci(); - return 0; -} -early_param("pci", parse_pci); - -int __init acpi_mps_check(void) -{ - return 0; -} - -static int __init setup_acpi_sci(char *s) -{ - if (!s) - return -EINVAL; - if (!strcmp(s, "edge")) - acpi_sci_flags = ACPI_MADT_TRIGGER_EDGE | - (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK); - else if (!strcmp(s, "level")) - acpi_sci_flags = ACPI_MADT_TRIGGER_LEVEL | - (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK); - else if (!strcmp(s, "high")) - acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_HIGH | - (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK); - else if (!strcmp(s, "low")) - acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_LOW | - (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK); - else - return -EINVAL; - return 0; -} -early_param("acpi_sci", setup_acpi_sci); - int __acpi_acquire_global_lock(unsigned int *lock) { unsigned int old, new, val;