On Monday, February 02, 2015 08:45:44 PM Hanjun Guo wrote:
From: Tomasz Nowicki tomasz.nowicki@linaro.org
ACPI kernel uses MADT table for proper GIC initialization. It needs to parse GIC related subtables, collect CPU interface and distributor addresses and call driver initialization function (which is hardware abstraction agnostic). In a similar way, FDT initialize GICv1/2.
NOTE: This commit allow to initialize GICv1/2 basic functionality. While now simple GICv2 init call is used, any further GIC features require generic infrastructure for proper ACPI irqchip initialization. That mechanism and stacked irqdomains to support GICv2 MSI/vitalization extension, GICv3/4 and its ITS are considered as next steps.
CC: Jason Cooper jason@lakedaemon.net CC: Marc Zyngier marc.zyngier@arm.com Tested-by: Suravee Suthikulpanit Suravee.Suthikulpanit@amd.com Tested-by: Yijing Wang wangyijing@huawei.com Tested-by: Mark Langsdorf mlangsdo@redhat.com Tested-by: Jon Masters jcm@redhat.com Tested-by: Timur Tabi timur@codeaurora.org Signed-off-by: Tomasz Nowicki tomasz.nowicki@linaro.org Signed-off-by: Hanjun Guo hanjun.guo@linaro.org
An ACK from Thomas Gleixner is absolutely necessary for anything touching drivers/irqchip/.
arch/arm64/include/asm/acpi.h | 2 + arch/arm64/kernel/acpi.c | 25 +++++++++ drivers/irqchip/irq-gic.c | 102 +++++++++++++++++++++++++++++++++++ drivers/irqchip/irqchip.c | 3 ++ include/linux/acpi.h | 15 ++++++ include/linux/irqchip/arm-gic-acpi.h | 31 +++++++++++ 6 files changed, 178 insertions(+) create mode 100644 include/linux/irqchip/arm-gic-acpi.h
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 7e825b9..ea4d2b3 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -12,6 +12,8 @@ #ifndef _ASM_ACPI_H #define _ASM_ACPI_H +#include <linux/irqchip/arm-gic-acpi.h>
#include <asm/smp_plat.h> /* Basic configuration for ACPI */ diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index f86a982..437315e 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -319,6 +319,31 @@ void __init acpi_boot_table_init(void) } } +void __init acpi_gic_init(void) +{
- struct acpi_table_header *table;
- acpi_status status;
- acpi_size tbl_size;
- int err;
- if (acpi_disabled)
return;- status = acpi_get_table_with_size(ACPI_SIG_MADT, 0, &table, &tbl_size);
- if (ACPI_FAILURE(status)) {
const char *msg = acpi_format_exception(status);pr_err("Failed to get MADT table, %s\n", msg);return;- }
- err = gic_v2_acpi_init(table);
- if (err)
pr_err("Failed to initialize GIC IRQ controller");- early_acpi_os_unmap_memory((char *)table, tbl_size);
+}
static int __init parse_acpi(char *arg) { if (!arg) diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index d617ee5..7f874d6 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -33,12 +33,14 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/acpi.h> #include <linux/irqdomain.h> #include <linux/interrupt.h> #include <linux/percpu.h> #include <linux/slab.h> #include <linux/irqchip/chained_irq.h> #include <linux/irqchip/arm-gic.h> +#include <linux/irqchip/arm-gic-acpi.h> #include <asm/cputype.h> #include <asm/irq.h> @@ -1083,3 +1085,103 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init); IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init); #endif
+#ifdef CONFIG_ACPI +static phys_addr_t dist_phy_base, cpu_phy_base; +static int cpu_base_assigned;
+static int __init +gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
const unsigned long end)+{
- struct acpi_madt_generic_interrupt *processor;
- phys_addr_t gic_cpu_base;
- processor = (struct acpi_madt_generic_interrupt *)header;
- if (BAD_MADT_ENTRY(processor, end))
return -EINVAL;- /*
* There is no support for non-banked GICv1/2 register in ACPI spec.* All CPU interface addresses have to be the same.*/- gic_cpu_base = processor->base_address;
- if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
return -EINVAL;- cpu_phy_base = gic_cpu_base;
- cpu_base_assigned = 1;
- return 0;
+}
+static int __init +gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
const unsigned long end)+{
- struct acpi_madt_generic_distributor *dist;
- dist = (struct acpi_madt_generic_distributor *)header;
- if (BAD_MADT_ENTRY(dist, end))
return -EINVAL;- dist_phy_base = dist->base_address;
- return 0;
+}
+int __init +gic_v2_acpi_init(struct acpi_table_header *table) +{
- void __iomem *cpu_base, *dist_base;
- int count;
- /* Collect CPU base addresses */
- count = acpi_parse_entries(ACPI_SIG_MADT,
sizeof(struct acpi_table_madt),gic_acpi_parse_madt_cpu, table,ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0);- if (count <= 0) {
pr_err("No valid GICC entries exist\n");return -EINVAL;- }
- /*
* Find distributor base address. We expect one distributor entry since* ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade.*/- count = acpi_parse_entries(ACPI_SIG_MADT,
sizeof(struct acpi_table_madt),gic_acpi_parse_madt_distributor, table,ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0);- if (count <= 0) {
pr_err("No valid GICD entries exist\n");return -EINVAL;- } else if (count > 1) {
pr_err("More than one GICD entry detected\n");return -EINVAL;- }
- cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
- if (!cpu_base) {
pr_err("Unable to map GICC registers\n");return -ENOMEM;- }
- dist_base = ioremap(dist_phy_base, ACPI_GICV2_DIST_MEM_SIZE);
- if (!dist_base) {
pr_err("Unable to map GICD registers\n");iounmap(cpu_base);return -ENOMEM;- }
- /*
* Initialize zero GIC instance (no multi-GIC support). Also, set GIC* as default IRQ domain to allow for GSI registration and GSI to IRQ* number translation (see acpi_register_gsi() and acpi_gsi_to_irq()).*/- gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
- irq_set_default_host(gic_data[0].domain);
- return 0;
+} +#endif diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c index 0fe2f71..5855240 100644 --- a/drivers/irqchip/irqchip.c +++ b/drivers/irqchip/irqchip.c @@ -8,6 +8,7 @@
- warranty of any kind, whether express or implied.
*/ +#include <linux/acpi.h> #include <linux/init.h> #include <linux/of_irq.h> #include <linux/irqchip.h> @@ -26,4 +27,6 @@ extern struct of_device_id __irqchip_of_table[]; void __init irqchip_init(void) { of_irq_init(__irqchip_of_table);
- acpi_irq_init();
} diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 87f365e..536991b 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -162,6 +162,16 @@ extern u32 acpi_irq_not_handled; extern int sbf_port; extern unsigned long acpi_realmode_flags; +static inline void acpi_irq_init(void) +{
- /*
* Hardcode ACPI IRQ chip initialization to GICv2 for now.* Proper irqchip infrastructure will be implemented along with* incoming GICv2m|GICv3|ITS bits.*/- acpi_gic_init();
+}
int acpi_register_gsi (struct device *dev, u32 gsi, int triggering, int polarity); int acpi_gsi_to_irq (u32 gsi, unsigned int *irq); int acpi_isa_irq_to_gsi (unsigned isa_irq, u32 *gsi); @@ -508,6 +518,11 @@ static inline int acpi_table_parse(char *id, return -ENODEV; } +static inline void acpi_irq_init(void) +{
- return;
+}
static inline int acpi_nvs_register(__u64 start, __u64 size) { return 0; diff --git a/include/linux/irqchip/arm-gic-acpi.h b/include/linux/irqchip/arm-gic-acpi.h new file mode 100644 index 0000000..ad5b577 --- /dev/null +++ b/include/linux/irqchip/arm-gic-acpi.h @@ -0,0 +1,31 @@ +/*
- Copyright (C) 2014, Linaro Ltd.
- Author: Tomasz Nowicki tomasz.nowicki@linaro.org
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#ifndef ARM_GIC_ACPI_H_ +#define ARM_GIC_ACPI_H_
+#ifdef CONFIG_ACPI
+/*
- Hard code here, we can not get memory size from MADT (but FDT does),
- Actually no need to do that, because this size can be inferred
- from GIC spec.
- */
+#define ACPI_GICV2_DIST_MEM_SIZE (SZ_4K) +#define ACPI_GIC_CPU_IF_MEM_SIZE (SZ_8K)
+struct acpi_table_header;
+void acpi_gic_init(void); +int gic_v2_acpi_init(struct acpi_table_header *table); +#else +static inline void acpi_gic_init(void) { } +#endif
+#endif /* ARM_GIC_ACPI_H_ */