From: Tomasz Nowicki tomasz.nowicki@linaro.org
Isolate hardware abstraction (FDT) code to gic_of_init(). Rest of the logic goes to gic_init_bases() and expects well defined data to initialize GIC properly. The same solution is used for GICv2 driver.
This is needed for ACPI initialization later.
Signed-off-by: Tomasz Nowicki tomasz.nowicki@linaro.org Signed-off-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/irqchip/irq-gic-v3.c | 105 +++++++++++++++++++++++++------------------ 1 file changed, 61 insertions(+), 44 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index 5492f4e..19a65de 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -766,17 +766,69 @@ static const struct irq_domain_ops gic_irq_domain_ops = { .free = gic_irq_domain_free, };
+static int __init gic_init_bases(void __iomem *dist_base, + struct redist_region *rdist_regs, + u32 nr_redist_regions, + u64 redist_stride, + void *domain_token) +{ + u32 typer; + int gic_irqs; + int err; + + gic_data.dist_base = dist_base; + gic_data.redist_regions = rdist_regs; + gic_data.nr_redist_regions = nr_redist_regions; + gic_data.redist_stride = redist_stride; + + /* + * Find out how many interrupts are supported. + * The GIC only supports up to 1020 interrupt sources (SGI+PPI+SPI) + */ + typer = readl_relaxed(gic_data.dist_base + GICD_TYPER); + gic_data.rdists.id_bits = GICD_TYPER_ID_BITS(typer); + gic_irqs = GICD_TYPER_IRQS(typer); + if (gic_irqs > 1020) + gic_irqs = 1020; + gic_data.irq_nr = gic_irqs; + + gic_data.domain = irq_domain_add_tree(domain_token, &gic_irq_domain_ops, + &gic_data); + gic_data.rdists.rdist = alloc_percpu(typeof(*gic_data.rdists.rdist)); + + if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) { + err = -ENOMEM; + goto out_free; + } + + set_handle_irq(gic_handle_irq); + + if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis()) + its_init(domain_token, &gic_data.rdists, gic_data.domain); + + gic_smp_init(); + gic_dist_init(); + gic_cpu_init(); + gic_cpu_pm_init(); + + return 0; + +out_free: + if (gic_data.domain) + irq_domain_remove(gic_data.domain); + free_percpu(gic_data.rdists.rdist); + return err; +} + +#ifdef CONFIG_OF static int __init gic_of_init(struct device_node *node, struct device_node *parent) { void __iomem *dist_base; struct redist_region *rdist_regs; u64 redist_stride; u32 nr_redist_regions; - u32 typer; u32 reg; - int gic_irqs; - int err; - int i; + int err, i;
dist_base = of_iomap(node, 0); if (!dist_base) { @@ -820,47 +872,11 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare if (of_property_read_u64(node, "redistributor-stride", &redist_stride)) redist_stride = 0;
- gic_data.dist_base = dist_base; - gic_data.redist_regions = rdist_regs; - gic_data.nr_redist_regions = nr_redist_regions; - gic_data.redist_stride = redist_stride; + err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions, + redist_stride, node); + if (!err) + return 0;
- /* - * Find out how many interrupts are supported. - * The GIC only supports up to 1020 interrupt sources (SGI+PPI+SPI) - */ - typer = readl_relaxed(gic_data.dist_base + GICD_TYPER); - gic_data.rdists.id_bits = GICD_TYPER_ID_BITS(typer); - gic_irqs = GICD_TYPER_IRQS(typer); - if (gic_irqs > 1020) - gic_irqs = 1020; - gic_data.irq_nr = gic_irqs; - - gic_data.domain = irq_domain_add_tree(node, &gic_irq_domain_ops, - &gic_data); - gic_data.rdists.rdist = alloc_percpu(typeof(*gic_data.rdists.rdist)); - - if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) { - err = -ENOMEM; - goto out_free; - } - - set_handle_irq(gic_handle_irq); - - if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis()) - its_init(node, &gic_data.rdists, gic_data.domain); - - gic_smp_init(); - gic_dist_init(); - gic_cpu_init(); - gic_cpu_pm_init(); - - return 0; - -out_free: - if (gic_data.domain) - irq_domain_remove(gic_data.domain); - free_percpu(gic_data.rdists.rdist); out_unmap_rdist: for (i = 0; i < nr_redist_regions; i++) if (rdist_regs[i].redist_base) @@ -872,3 +888,4 @@ out_unmap_dist: }
IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init); +#endif