Add in new compliance checks for the P_LVL2_LAT and P_LVL3_LAT fields. Both of these require knowing the value of an x86 P_BLK; this in turn requires examination of any Processor() declarations in the ACPI name space, which in turn requires the initialization of the ACPI interpreter.
It is probable that these fields are seldom used; processor speeds and feeds are typically controlled via very different mechanisms these days. These tests are therefore for completeness sake and it may be difficult to find ACPI tables using these fields.
Note that these tests allow us to remove commented out versions of simpler tests of these fields.
Signed-off-by: Al Stone al.stone@linaro.org Acked-by: Colin Ian King colin.king@canonical.com Acked-by: Alex Hung alex.hung@canonical.com --- src/acpi/fadt/fadt.c | 172 +++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 147 insertions(+), 25 deletions(-)
diff --git a/src/acpi/fadt/fadt.c b/src/acpi/fadt/fadt.c index 6954e49..34978e5 100644 --- a/src/acpi/fadt/fadt.c +++ b/src/acpi/fadt/fadt.c @@ -19,6 +19,7 @@ * */ #include "fwts.h" +#include "fwts_acpi_object_eval.h"
#include <stdio.h> #include <stdlib.h> @@ -1342,6 +1343,138 @@ static void acpi_table_check_fadt_cst_cnt(fwts_framework *fw) return; }
+static uint64_t fadt_find_p_blk(fwts_framework *fw) +{ + uint64_t pblk; + fwts_list *objects; + + pblk = 0; + objects = fwts_acpi_object_get_names(); + if (objects) { + fwts_list_link *obj; + + fwts_list_foreach(obj, objects) { + char *name = fwts_list_data(char*, obj); + ACPI_OBJECT pr = { 0 }; + ACPI_BUFFER buf = { sizeof(ACPI_OBJECT), &pr }; + ACPI_HANDLE handle; + ACPI_OBJECT_TYPE type; + ACPI_STATUS status; + + status = AcpiGetHandle(NULL, name, &handle); + if (ACPI_FAILURE(status)) { + fwts_warning(fw, "Failed to get handle for " + "object %s.", name); + continue; + } + status = AcpiGetType(handle, &type); + if (ACPI_FAILURE(status)) { + fwts_warning(fw, "Failed to get type for " + "object %s.", name); + continue; + } + + /* + * If a CPU is not defined as a Processor object, + * we don't care here. Per section 8.1.2 and 8.1.3, + * defining a CPU with a Device object implies that + * a _CST method must be defined, and whatever is + * in the _CST overrides the P_BLK and P_LVL*_LAT + * values. Since we're only trying to validate the + * P_LVL*_LAT values, and they're only used if the + * CPUs are defined as Processor objects, we can + * ignore any CPUs defined as Device objects. + */ + if (type == ACPI_TYPE_PROCESSOR) { + status = AcpiEvaluateObject(handle, NULL, NULL, + &buf); + if (ACPI_FAILURE(status)) + fwts_warning(fw, "Could not evaluate " + "Processor %s", name); + else { + if (pr.Processor.PblkAddress) + pblk = pr.Processor.PblkAddress; + } + } + } + } + + fwts_log_info(fw, "Using P_BLK address of 0x%" PRIx64, pblk); + return pblk; +} + +static void acpi_table_check_fadt_p_lvl2_lat(fwts_framework *fw, uint64_t pblk) +{ + if (pblk) { + if (fadt->p_lvl2_lat <= 100) + fwts_passed(fw, + "FADT P_LVL2_LAT is within proper range " + "at %" PRIu16, fadt->p_lvl2_lat); + else + fwts_warning(fw, + "FADT P_LVL2_LAT is > 100 (%" PRIu16 ") " + "but a P_BLK is defined. This implies " + "a C2 state is not supported, but there " + "is a P_BLK register block defined which " + "implies there might be a C2 state that " + "works. There is not enough information " + "to determine if this is expected or not.", + fadt->p_lvl2_lat); + } else { + if (fadt->p_lvl2_lat <= 100) + fwts_failed(fw, LOG_LEVEL_MEDIUM, + "PLvl2LatDefinedButNotUsable", + "FADT P_LVL2_LAT is <= 100 (%" PRIu16 ") " + "which implies a C2 state is supported " + "but there is no P_BLK register block " + "defined to enable the C2 transition.", + fadt->p_lvl2_lat); + else + fwts_passed(fw, + "FADT P_LVL2_LAT is > 100 (%" PRIu16 ") " + "and no P_BLK is defined.", + fadt->p_lvl2_lat); + } + + return; +} + +static void acpi_table_check_fadt_p_lvl3_lat(fwts_framework *fw, uint64_t pblk) +{ + if (pblk) { + if (fadt->p_lvl3_lat <= 1000) + fwts_passed(fw, + "FADT P_LVL3_LAT is within proper range " + "at %" PRIu16, fadt->p_lvl3_lat); + else + fwts_warning(fw, + "FADT P_LVL3_LAT is > 1000 (%" PRIu16 ") " + "but a P_BLK is defined. This implies " + "a C3 state is not supported, but there " + "is a P_BLK register block defined which " + "implies there might be a C3 state that " + "works. There is not enough information " + "to determine if this is expected or not.", + fadt->p_lvl3_lat); + } else { + if (fadt->p_lvl3_lat <= 1000) + fwts_failed(fw, LOG_LEVEL_MEDIUM, + "PLvl3LatDefinedButNotUsable", + "FADT P_LVL3_LAT is <= 1000 (%" PRIu16 ") " + "which implies a C3 state is supported " + "but there is no P_BLK register block " + "defined to enable the C3 transition.", + fadt->p_lvl3_lat); + else + fwts_passed(fw, + "FADT P_LVL3_LAT is > 100 (%" PRIu16 ") " + "and no P_BLK is defined.", + fadt->p_lvl3_lat); + } + + return; +} + static int fadt_test1(fwts_framework *fw) { bool passed = true; @@ -1381,6 +1514,20 @@ static int fadt_test1(fwts_framework *fw) fwts_log_info(fw, "FADT GPE1_BASE is %" PRIu8, fadt->gpe1_base); acpi_table_check_fadt_cst_cnt(fw);
+ if (fwts_acpi_init(fw) == FWTS_OK) { + uint64_t pblk = fadt_find_p_blk(fw); + + acpi_table_check_fadt_p_lvl2_lat(fw, pblk); + acpi_table_check_fadt_p_lvl3_lat(fw, pblk); + fwts_acpi_deinit(fw); + } else { + fwts_log_error(fw, "Cannot initialize ACPI namespace."); + fwts_log_info(fw, + "Without a namespace, cannot test " + "values of P_LVL2_LAT or P_LVL3_LAT " + "for correctness."); + } + fwts_log_info(fw, "FADT FLUSH_SIZE is %" PRIu16, fadt->flush_size); fwts_log_info(fw, "FADT FLUSH_STRIDE is %" PRIu16, @@ -1395,31 +1542,6 @@ static int fadt_test1(fwts_framework *fw) }
/* - * Bug LP: #833644 - * - * Remove these tests, really need to put more intelligence into it - * perhaps in the cstates test rather than here. For the moment we - * shall remove this warning as it's giving users false alarms - * See: https://bugs.launchpad.net/ubuntu/+source/fwts/+bug/833644 - */ - /* - if (fadt->p_lvl2_lat > 100) { - fwts_warning(fw, "FADT P_LVL2_LAT is %" PRIi16 ", a value > 100 indicates a " - "system not to support a C2 state.", fadt->p_lvl2_lat); - fwts_advice(fw, "The FADT P_LVL2_LAT setting specifies the C2 latency in microseconds. The ACPI specification " - "states that a value > 100 indicates that C2 is not supported and hence the " - "ACPI processor idle routine will not use C2 power states."); - } - if (fadt->p_lvl3_lat > 1000) { - fwts_warning(fw, "FADT P_LVL3_LAT is %" PRIu16 ", a value > 1000 indicates a " - "system not to support a C3 state.", fadt->p_lvl3_lat); - fwts_advice(fw, "The FADT P_LVL2_LAT setting specifies the C3 latency in microseconds. The ACPI specification " - "states that a value > 1000 indicates that C3 is not supported and hence the " - "ACPI processor idle routine will not use C3 power states."); - } - */ - - /* * Cannot really test the Hypervisor Vendor Identity since * the value is provided by the hypervisor to the OS (as a * sign that the ACPI tables have been fabricated), if it