On 26.05.2015 14:49, Hanjun Guo wrote:
Based on Jiang Liu's common interface to support PCI host bridge init and refactoring of MMCONFIG, this patch using information from ACPI MCFG table and IO/irq resources from _CRS to init ARM64 PCI hostbridge, then PCI will work on ARM64.
This patch is based on Mark Salter and Tomasz Nowicki's work.
Signed-off-by: Hanjun Guo hanjun.guo@linaro.org Tested-by: Suravee Suthikulpanit Suravee.Suthikulpanit@amd.com CC: Arnd Bergmann arnd@arndb.de CC: Catalin Marinas catalin.marinas@arm.com CC: Liviu Dudau Liviu.Dudau@arm.com CC: Lorenzo Pieralisi Lorenzo.Pieralisi@arm.com CC: Will Deacon will.deacon@arm.com
arch/arm64/Kconfig | 7 ++ arch/arm64/kernel/pci.c | 245 +++++++++++++++++++++++++++++++++++++++++++++--- drivers/pci/pci.c | 26 +++-- 3 files changed, 257 insertions(+), 21 deletions(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 9b80428..8e4b789 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -276,6 +276,13 @@ config PCI_DOMAINS_GENERIC config PCI_SYSCALL def_bool PCI
+config PCI_MMCONFIG
- def_bool y
- select PCI_ECAM
- select HAVE_PCI_ECAM
- select GENERIC_PCI_ECAM
HAVE_PCI_ECAM and GENERIC_PCI_ECAM should be selected by platform.
- depends on ACPI
I think we should depend on PCI too.
Tomasz
- source "drivers/pci/Kconfig" source "drivers/pci/pcie/Kconfig" source "drivers/pci/hotplug/Kconfig"
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c index 4095379..d1629dc 100644 --- a/arch/arm64/kernel/pci.c +++ b/arch/arm64/kernel/pci.c @@ -11,12 +11,15 @@ */
#include <linux/acpi.h> +#include <linux/ecam.h> #include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/mm.h> +#include <linux/of_address.h> #include <linux/of_pci.h> #include <linux/of_platform.h> +#include <linux/pci-acpi.h> #include <linux/slab.h>
#include <asm/pci-bridge.h> @@ -43,31 +46,251 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, */ int pcibios_add_device(struct pci_dev *dev) {
- dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
if (acpi_disabled)
dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
return 0; }
+#ifdef CONFIG_ACPI +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) +{
- struct pci_controller *sd = bridge->bus->sysdata;
- ACPI_COMPANION_SET(&bridge->dev, sd->companion);
- return 0;
+}
+void pcibios_add_bus(struct pci_bus *bus) +{
- acpi_pci_add_bus(bus);
+}
+void pcibios_remove_bus(struct pci_bus *bus) +{
- acpi_pci_remove_bus(bus);
+}
+int pcibios_enable_irq(struct pci_dev *dev) +{
- if (!pci_dev_msi_enabled(dev))
acpi_pci_irq_enable(dev);
- return 0;
+}
+int pcibios_disable_irq(struct pci_dev *dev) +{
- if (!pci_dev_msi_enabled(dev))
acpi_pci_irq_disable(dev);
- return 0;
+}
+int pcibios_enable_device(struct pci_dev *dev, int bars) +{
- int err;
- err = pci_enable_resources(dev, bars);
- if (err < 0)
return err;
- return pcibios_enable_irq(dev);
+}
+static int __init pcibios_assign_resources(void) +{
- struct pci_bus *root_bus;
- if (acpi_disabled)
return 0;
- list_for_each_entry(root_bus, &pci_root_buses, node) {
pcibios_resource_survey_bus(root_bus);
pci_assign_unassigned_root_bus_resources(root_bus);
- }
- return 0;
+} /*
- raw_pci_read/write - Platform-specific PCI config space access.
- fs_initcall comes after subsys_initcall, so we know acpi scan
*/
- has run.
-int raw_pci_read(unsigned int domain, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *val)
+fs_initcall(pcibios_assign_resources);
+static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
{int size, u32 *value)
- return -ENXIO;
- return raw_pci_read(pci_domain_nr(bus), bus->number,
}devfn, where, size, value);
-int raw_pci_write(unsigned int domain, unsigned int bus,
unsigned int devfn, int reg, int len, u32 val)
+static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
{int size, u32 value)
- return -ENXIO;
- return raw_pci_write(pci_domain_nr(bus), bus->number,
}devfn, where, size, value);
-#ifdef CONFIG_ACPI +struct pci_ops pci_root_ops = {
- .read = pci_read,
- .write = pci_write,
+};
+struct pci_root_info {
- struct acpi_pci_root_info common;
+#ifdef CONFIG_PCI_MMCONFIG
- bool mcfg_added;
- u8 start_bus;
- u8 end_bus;
+#endif +};
+#ifdef CONFIG_PCI_MMCONFIG +static int pci_add_mmconfig_region(struct acpi_pci_root_info *ci) +{
- struct pci_mmcfg_region *cfg;
- struct pci_root_info *info;
- struct acpi_pci_root *root = ci->root;
- int err, seg = ci->controller.segment;
- info = container_of(ci, struct pci_root_info, common);
- info->start_bus = (u8)root->secondary.start;
- info->end_bus = (u8)root->secondary.end;
- info->mcfg_added = false;
- rcu_read_lock();
- cfg = pci_mmconfig_lookup(seg, info->start_bus);
- rcu_read_unlock();
- if (cfg)
return 0;
- cfg = pci_mmconfig_alloc(seg, info->start_bus, info->end_bus,
root->mcfg_addr);
- if (!cfg)
return -ENOMEM;
- err = pci_mmconfig_inject(cfg);
- if (!err)
info->mcfg_added = true;
- return err;
+}
+static void pci_remove_mmconfig_region(struct acpi_pci_root_info *ci) +{
- struct pci_root_info *info;
- info = container_of(ci, struct pci_root_info, common);
- if (info->mcfg_added) {
pci_mmconfig_delete(ci->controller.segment, info->start_bus,
info->end_bus);
info->mcfg_added = false;
- }
+} +#else +static int pci_add_mmconfig_region(struct acpi_pci_root_info *ci) +{
- return 0;
+}
+static void pci_remove_mmconfig_region(struct acpi_pci_root_info *ci) { } +#endif
+static int pci_acpi_root_init_info(struct acpi_pci_root_info *ci) +{
- return pci_add_mmconfig_region(ci);
+}
+static void pci_acpi_root_release_info(struct acpi_pci_root_info *ci) +{
- struct pci_root_info *info;
- info = container_of(ci, struct pci_root_info, common);
- pci_remove_mmconfig_region(ci);
- kfree(info);
+}
+static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci,
int status)
+{
- struct resource_entry *entry, *tmp;
- resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
struct resource *res = entry->res;
/*
* Special handling for ARM IO range
* TODO: need to move pci_register_io_range() function out
* of drivers/of/address.c for both used by DT and ACPI
*/
if (res->flags & IORESOURCE_IO) {
unsigned long port;
int err;
resource_size_t length = res->end - res->start;
err = pci_register_io_range(res->start, length);
if (err) {
resource_list_destroy_entry(entry);
continue;
}
port = pci_address_to_pio(res->start);
if (port == (unsigned long)-1) {
resource_list_destroy_entry(entry);
continue;
}
res->start = port;
res->end = res->start + length - 1;
if (pci_remap_iospace(res, res->start) < 0)
resource_list_destroy_entry(entry);
}
- }
- return status;
+}
+static struct acpi_pci_root_ops acpi_pci_root_ops = {
- .pci_ops = &pci_root_ops,
- .init_info = pci_acpi_root_init_info,
- .release_info = pci_acpi_root_release_info,
- .prepare_resources = pci_acpi_root_prepare_resources,
+};
- /* Root bridge scanning */ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) {
- /* TODO: Should be revisited when implementing PCI on ACPI */
- return NULL;
- struct pci_root_info *info;
- int node;
- int domain = root->segment;
- int busnum = root->secondary.start;
- struct pci_bus *bus;
- if (domain && !pci_domains_supported) {
pr_warn("PCI %04x:%02x: multiple domains not supported.\n",
domain, busnum);
return NULL;
- }
- node = acpi_get_node(root->device->handle);
- info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
- if (!info) {
dev_err(&root->device->dev, "pci_bus %04x:%02x: ignored (out of memory)\n",
domain, busnum);
return NULL;
- }
- bus = acpi_pci_root_create(root, &acpi_pci_root_ops, &info->common);
- /* After the PCI-E bus has been walked and all devices discovered,
* configure any settings of the fabric that might be necessary.
*/
- if (bus) {
struct pci_bus *child;
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
- }
- return bus; } #endif
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index acc4b6e..0268a1d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -25,6 +25,7 @@ #include <linux/device.h> #include <linux/pm_runtime.h> #include <linux/pci_hotplug.h> +#include <linux/acpi.h> #include <asm-generic/pci-bridge.h> #include <asm/setup.h> #include "pci.h" @@ -4509,7 +4510,7 @@ int pci_get_new_domain_nr(void) void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) { static int use_dt_domains = -1;
- int domain = of_get_pci_domain_nr(parent->of_node);
int domain;
/*
- Check DT domain and use_dt_domains values.
@@ -4537,17 +4538,22 @@ void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) * invalidating the domain value (domain = -1) and printing a * corresponding error. */
- if (domain >= 0 && use_dt_domains) {
use_dt_domains = 1;
- } else if (domain < 0 && use_dt_domains != 1) {
use_dt_domains = 0;
domain = pci_get_new_domain_nr();
- if (acpi_disabled) {
domain = of_get_pci_domain_nr(parent->of_node);
if (domain >= 0 && use_dt_domains) {
use_dt_domains = 1;
} else if (domain < 0 && use_dt_domains != 1) {
use_dt_domains = 0;
domain = pci_get_new_domain_nr();
} else {
dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n",
parent->of_node->full_name);
domain = -1;
} else {}
dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n",
parent->of_node->full_name);
domain = -1;
struct pci_controller *sd = bus->sysdata;
}domain = sd->segment;
- bus->domain_nr = domain; } #endif