The platform_device returned by of_find_device_by_node() is not automatically released when the driver unprobes. Therefore, managed calls like devm_ioremap_resource() should not be used. Instead, we manually allocate the resources and then free them on driver release.
Signed-off-by: Timur Tabi timur@codeaurora.org --- drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 42 +++++++++++++++++++------ drivers/net/ethernet/qualcomm/emac/emac.c | 4 +++ 2 files changed, 37 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c index 9a9a963..2a095fb 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c @@ -681,6 +681,7 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) struct resource *res; const struct of_device_id *match; struct device_node *np; + int ret;
np = of_parse_phandle(pdev->dev.of_node, "internal-phy", 0); if (!np) { @@ -697,26 +698,49 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev); if (!match) { dev_err(&pdev->dev, "unrecognized internal phy node\n"); - return -ENODEV; + ret = -ENODEV; + goto error_put_device; }
phy->initialize = (emac_sgmii_initialize)match->data;
/* Base address is the first address */ res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 0); - phy->base = devm_ioremap_resource(&sgmii_pdev->dev, res); - if (IS_ERR(phy->base)) - return PTR_ERR(phy->base); + phy->base = ioremap(res->start, resource_size(res)); + if (IS_ERR(phy->base)) { + ret = PTR_ERR(phy->base); + goto error_put_device; + }
/* v2 SGMII has a per-lane digital digital, so parse it if it exists */ res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 1); if (res) { - phy->digital = devm_ioremap_resource(&sgmii_pdev->dev, res); - if (IS_ERR(phy->base)) - return PTR_ERR(phy->base); - + phy->digital = ioremap(res->start, resource_size(res)); + if (IS_ERR(phy->digital)) { + ret = PTR_ERR(phy->digital); + goto error_unmap_base; + } }
- return phy->initialize(adpt); + ret = phy->initialize(adpt); + if (ret) + goto error; + + /* We've remapped the addresses, so we don't need the device any + * more. of_find_device_by_node() says we should release it. + */ + put_device(&sgmii_pdev->dev); + + return 0; + +error: + if (phy->digital) + iounmap(phy->digital); +error_unmap_base: + iounmap(phy->base); +error_put_device: + put_device(&sgmii_pdev->dev); + + return ret; }
diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index e47d387..429b4cb 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -723,6 +723,10 @@ static int emac_remove(struct platform_device *pdev) mdiobus_unregister(adpt->mii_bus); free_netdev(netdev);
+ if (adpt->phy.digital) + iounmap(adpt->phy.digital); + iounmap(adpt->phy.base); + return 0; }