On Mon, 22 Jul 2019 at 20:33, Bjorn Andersson bjorn.andersson@linaro.org wrote:
On Fri 21 Jun 07:54 PDT 2019, Jeffrey Hugo wrote:
This adds the initial DT for the Lenovo Miix 630 laptop. Supported functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo jeffrey.l.hugo@gmail.com
Applied patch 3-5
Sorry for a basic question, but which linux tree would one expect these to be applied in? I've poked a few obvious places, and don't see these applied. Also is Yoga C630 going to be submitted on top of these? Or should I submit them?
Regards,
Dimitri.
Thanks, Bjorn
arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/msm8998-clamshell.dtsi | 240 ++++++++++++++++++ .../boot/dts/qcom/msm8998-lenovo-miix-630.dts | 30 +++ 3 files changed, 271 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 21d548f02d39..c3e4307bcbd4 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi new file mode 100644 index 000000000000..9682d4dd7496 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+/*
- Common include for MSM8998 clamshell devices, ie the Lenovo Miix 630,
- Asus NovaGo TP370QL, and HP Envy x2. All three devices are basically the
- same, with differences in peripherals.
- */
+#include "msm8998.dtsi" +#include "pm8998.dtsi" +#include "pm8005.dtsi"
+/ {
chosen {};vph_pwr: vph-pwr-regulator {compatible = "regulator-fixed";regulator-name = "vph_pwr";regulator-always-on;regulator-boot-on;};+};
+&qusb2phy {
status = "okay";vdda-pll-supply = <&vreg_l12a_1p8>;vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;+};
+&rpm_requests {
pm8998-regulators {compatible = "qcom,rpm-pm8998-regulators";vdd_s1-supply = <&vph_pwr>;vdd_s2-supply = <&vph_pwr>;vdd_s3-supply = <&vph_pwr>;vdd_s4-supply = <&vph_pwr>;vdd_s5-supply = <&vph_pwr>;vdd_s6-supply = <&vph_pwr>;vdd_s7-supply = <&vph_pwr>;vdd_s8-supply = <&vph_pwr>;vdd_s9-supply = <&vph_pwr>;vdd_s10-supply = <&vph_pwr>;vdd_s11-supply = <&vph_pwr>;vdd_s12-supply = <&vph_pwr>;vdd_s13-supply = <&vph_pwr>;vdd_l1_l27-supply = <&vreg_s7a_1p025>;vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;vdd_l3_l11-supply = <&vreg_s7a_1p025>;vdd_l4_l5-supply = <&vreg_s7a_1p025>;vdd_l6-supply = <&vreg_s5a_2p04>;vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;vdd_l9-supply = <&vph_pwr>;vdd_l10_l23_l25-supply = <&vph_pwr>;vdd_l13_l19_l21-supply = <&vph_pwr>;vdd_l16_l28-supply = <&vph_pwr>;vdd_l18_l22-supply = <&vph_pwr>;vdd_l20_l24-supply = <&vph_pwr>;vdd_l26-supply = <&vreg_s3a_1p35>;vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;vreg_s3a_1p35: s3 {regulator-min-microvolt = <1352000>;regulator-max-microvolt = <1352000>;};vreg_s4a_1p8: s4 {regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-allow-set-load;};vreg_s5a_2p04: s5 {regulator-min-microvolt = <1904000>;regulator-max-microvolt = <2040000>;};vreg_s7a_1p025: s7 {regulator-min-microvolt = <900000>;regulator-max-microvolt = <1028000>;};vreg_l1a_0p875: l1 {regulator-min-microvolt = <880000>;regulator-max-microvolt = <880000>;regulator-allow-set-load;};vreg_l2a_1p2: l2 {regulator-min-microvolt = <1200000>;regulator-max-microvolt = <1200000>;regulator-allow-set-load;};vreg_l3a_1p0: l3 {regulator-min-microvolt = <1000000>;regulator-max-microvolt = <1000000>;};vreg_l5a_0p8: l5 {regulator-min-microvolt = <800000>;regulator-max-microvolt = <800000>;};vreg_l6a_1p8: l6 {regulator-min-microvolt = <1808000>;regulator-max-microvolt = <1808000>;};vreg_l7a_1p8: l7 {regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;};vreg_l8a_1p2: l8 {regulator-min-microvolt = <1200000>;regulator-max-microvolt = <1200000>;};vreg_l9a_1p8: l9 {regulator-min-microvolt = <1808000>;regulator-max-microvolt = <2960000>;};vreg_l10a_1p8: l10 {regulator-min-microvolt = <1808000>;regulator-max-microvolt = <2960000>;};vreg_l11a_1p0: l11 {regulator-min-microvolt = <1000000>;regulator-max-microvolt = <1000000>;};vreg_l12a_1p8: l12 {regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;};vreg_l13a_2p95: l13 {regulator-min-microvolt = <1808000>;regulator-max-microvolt = <2960000>;};vreg_l14a_1p88: l14 {regulator-min-microvolt = <1880000>;regulator-max-microvolt = <1880000>;};vreg_15a_1p8: l15 {regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;};vreg_l16a_2p7: l16 {regulator-min-microvolt = <2704000>;regulator-max-microvolt = <2704000>;};vreg_l17a_1p3: l17 {regulator-min-microvolt = <1304000>;regulator-max-microvolt = <1304000>;};vreg_l18a_2p7: l18 {regulator-min-microvolt = <2704000>;regulator-max-microvolt = <2704000>;};vreg_l19a_3p0: l19 {regulator-min-microvolt = <3008000>;regulator-max-microvolt = <3008000>;};vreg_l20a_2p95: l20 {regulator-min-microvolt = <2960000>;regulator-max-microvolt = <2960000>;regulator-allow-set-load;};vreg_l21a_2p95: l21 {regulator-min-microvolt = <2960000>;regulator-max-microvolt = <2960000>;regulator-allow-set-load;regulator-system-load = <800000>;};vreg_l22a_2p85: l22 {regulator-min-microvolt = <2864000>;regulator-max-microvolt = <2864000>;};vreg_l23a_3p3: l23 {regulator-min-microvolt = <3312000>;regulator-max-microvolt = <3312000>;};vreg_l24a_3p075: l24 {regulator-min-microvolt = <3088000>;regulator-max-microvolt = <3088000>;};vreg_l25a_3p3: l25 {regulator-min-microvolt = <3104000>;regulator-max-microvolt = <3312000>;};vreg_l26a_1p2: l26 {regulator-min-microvolt = <1200000>;regulator-max-microvolt = <1200000>;};vreg_l28_3p0: l28 {regulator-min-microvolt = <3008000>;regulator-max-microvolt = <3008000>;};vreg_lvs1a_1p8: lvs1 {regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;};vreg_lvs2a_1p8: lvs2 {regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;};};+};
+&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;touchpad: touchpad {config {pins = "gpio123";bias-pull-up; /* pull up */};};+};
+&sdhc2 {
status = "okay";vmmc-supply = <&vreg_l21a_2p95>;vqmmc-supply = <&vreg_l13a_2p95>;pinctrl-names = "default", "sleep";pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;+};
+&usb3 {
status = "okay";+};
+&usb3_dwc3 {
dr_mode = "host"; /* Force to host until we have Type-C hooked up */+};
+&usb3phy {
status = "okay";vdda-phy-supply = <&vreg_l1a_0p875>;vdda-pll-supply = <&vreg_l2a_1p2>;+}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts new file mode 100644 index 000000000000..407c6a32911c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+/dts-v1/;
+#include "msm8998-clamshell.dtsi"
+/ {
model = "Lenovo Miix 630";compatible = "lenovo,miix-630", "qcom,msm8998";+};
+&blsp1_i2c6 {
status = "okay";keyboard@3a {compatible = "hid-over-i2c";interrupt-parent = <&tlmm>;interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>;reg = <0x3a>;hid-descr-addr = <0x0001>;pinctrl-names = "default";pinctrl-0 = <&touchpad>;};+};
+&sdhc2 {
cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;+};
2.17.1
On Tue, Jul 23, 2019 at 3:06 PM Dimitri John Ledkov xnox@ubuntu.com wrote:
On Mon, 22 Jul 2019 at 20:33, Bjorn Andersson bjorn.andersson@linaro.org wrote:
On Fri 21 Jun 07:54 PDT 2019, Jeffrey Hugo wrote:
This adds the initial DT for the Lenovo Miix 630 laptop. Supported functionality includes USB (host), microSD-card, keyboard, and
trackpad.
Signed-off-by: Jeffrey Hugo jeffrey.l.hugo@gmail.com
Applied patch 3-5
Sorry for a basic question, but which linux tree would one expect these to be applied in? I've poked a few obvious places, and don't see these applied. Also is Yoga C630 going to be submitted on top of these? Or should I submit them?
These are already in the qcom tree - https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/ I'm thinking they will be in -next tomorrow.
The 835 laptops consume most of my time, so I don't think I'll be doing a patch for the C630 anytime soon. I'd say having you submit something would be a good idea.
-Jeff
On Tue, Jul 23, 2019 at 2:11 PM Jeffrey Hugo jlhugo@gmail.com wrote:
On Tue, Jul 23, 2019 at 3:06 PM Dimitri John Ledkov xnox@ubuntu.com wrote:
On Mon, 22 Jul 2019 at 20:33, Bjorn Andersson bjorn.andersson@linaro.org wrote:
On Fri 21 Jun 07:54 PDT 2019, Jeffrey Hugo wrote:
This adds the initial DT for the Lenovo Miix 630 laptop. Supported functionality includes USB (host), microSD-card, keyboard, and
trackpad.
Signed-off-by: Jeffrey Hugo jeffrey.l.hugo@gmail.com
Applied patch 3-5
Sorry for a basic question, but which linux tree would one expect these to be applied in? I've poked a few obvious places, and don't see these applied. Also is Yoga C630 going to be submitted on top of these? Or should I submit them?
These are already in the qcom tree - https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/ I'm thinking they will be in -next tomorrow.
The 835 laptops consume most of my time, so I don't think I'll be doing a patch for the C630 anytime soon. I'd say having you submit something would be a good idea.
Bjorn has something for yoga c630.. which I assume he'll post when it is ready..
BR, -R
aarch64-laptops@lists.linaro.org
-
Dimitri John Ledkov -
Jeffrey Hugo -
Rob Clark