On Tue, Feb 07, 2017 at 02:50:06AM +0800, fu.wei@linaro.org wrote:
From: Fu Wei fu.wei@linaro.org
Currently, arch_timer_rate is used to store the frequency got from per-cpu arch-timer or the memory-mapped (MMIO) timers. But those values come from different registers which should all be initialized by firmware.
This patch remove arch_timer_rate, and use arch_timer_sysreg_freq and arch_timer_mmio_freq instead.
Signed-off-by: Fu Wei fu.wei@linaro.org
Thanks for attacking this. Generally, I do think this is the right thing to do.
However...
@@ -1070,10 +1077,9 @@ static int __init arch_timer_mem_init(struct device_node *np) * Try to determine the frequency from the device tree, * if fail, get the frequency from the CNTFRQ reg of MMIO timer. */
- if (!arch_timer_rate &&
of_property_read_u32(np, "clock-frequency", &arch_timer_rate))arch_timer_rate = arch_timer_get_mmio_freq(base);- if (!arch_timer_rate) {
- if (of_property_read_u32(np, "clock-frequency", &arch_timer_mmio_freq))
arch_timer_mmio_freq = arch_timer_get_mmio_freq(base);- if (!arch_timer_mmio_freq) { pr_err(FW_BUG "frequency not available for MMIO timer.\n"); ret = -EINVAL; goto out;
... unfortunately, I believe that this will break some DT platforms that have been (unintentionally) relying on the way currently allow the frequency to be probed from either the MMIO timer or the sysreg timer.
So while the above was my suggestion, it was not my best.
For the timebeing, let's leave the single arch_timer_rate, but ensure that it doesn't get in the way fo the ACPI code, by making the ACPI probe path:
* Probe the sysreg timers first, using the sysreg cntfrq().
* Probe the MMIO timers second, verifying that each MMIO cntfrq matches the already-probed sysreg cntfrq.
... which is what I believe you suggested previously.
Thanks, Mark.